Interface 3A Series Multi Axis Load Cells Manual

KEKETSO TSEBISO

1. Interface model 3A Series li-cell load tse nang le li-axis tse ngata li tlameha ho behoa holim'a bokaholimo bo bataletseng le bo thata ka ho lekaneng e le hore li se ke tsa holofala ka mokhoa o khahlisang ha li le tlas'a mojaro.
2. Li-fasteners li lokela ho ba Kereiti ea 8.8 bakeng sa 3A60 ho ea ho 3A160 le Kereiti ea 10.9 bakeng sa 3A300 le 3A400.
3. Li-sensor li lokela ho kenngoa ho sebelisoa li-screw tse khothalelitsoeng le li-torque tse behiloeng tafoleng e ka tlase.
4. Lithakhisa tsa lithapo li lokela ho sebelisoa libakeng tsohle tse holang.
5. Bakeng sa 3A300 le 3A400 bonyane lithakhisa tse peli tsa dowel li lokela ho sebelisoa pheletsong e phelang. Ho fihlela ho 5 ho ka sebelisoa.
6. Bakeng sa li-sensor tsa 500N le ka holimo, ho khothaletsoa koae e tšesaane ea Loctite 638 kapa e tšoanang holim'a libaka tse tharo tse holimo ho thibela ho thella.
7. Lisebelisoa le lipoleiti tse ntseng li hola li ka ikopanya le sensor feela libakeng tse bonts'itsoeng.

LITLHAKU TSE KHOLO

	Mohlala	Rated load/ Bokgoni	Litekanyo	Lintho tse bonahalang	Sethala sa ho lekanya / Live End			Stator / Dead End
					Khoele	Torque e tiisang (Nm)	Silinda pin Hole (mm)	Khoele / Cylindered Screw	Torque e tiisang (Nm)	Silinda pin Hole (mm)
	3A40	±2N ±10N ±20N ±50N	40 limilimithara x 40 limilimithara x 20 limilimithara	motsoako oa aluminium	khoele ea ka hare 4x M3x0.5 botebo ba 8 mm	1	che	khoele ea ka hare 4x M3x0.5 botebo ba 8 mm	1	che
	EA-3A	±10N ±20N ±50N ±100N	60 limilimithara x 60 limilimithara x 25 limilimithara	motsoako oa aluminium	khoele ea ka hare 4x M3x0.5 botebo ba 12 mm	1	2 x Ø2 E7 botebo ba 12 mm	2 x DIN EN ISO 4762 M4х0.7 6.8	2	2 x Ø3 E7 botebo ba 5 mm
		±200N ±500N		ts'epe e sa beng le mabali	khoele ea ka hare 4x M3x0.5 botebo ba 12 mm	1	2 x Ø2 E7 botebo ba 12 mm	2 x DIN EN ISO 4762 M4х0.7 6.8	2	2 x Ø3 E7 botebo ba 5 mm
	3A120	±50N ±100N ±200N ±500N ±1000N	120 limilimithara x 120 limilimithara x 30 limilimithara	motsoako oa aluminium	Ka hare khoele 4x M6x1 Botebo 12 limilimithara	10	2 x Ø5 E7 Botebo ba 12 mm	4 x DIN EN ISO 4762 M6х1 6.8	10	2 x Ø5 E7 botebo ba 3 mm
		±1kN ±2kN ±5kN		ts'epe e sa beng le mabali	khoele ea ka hare 4x M6x1 Botebo ba 12 mm	15	2 x Ø5 E7 Botebo ba 12 mm	4 x DIN EN ISO 4762 M6х1 10.9	15	2 x Ø5 E7 botebo ba 3 mm
	3A160	±2kN ±5kN	160 limilimithara x 160 limilimithara x 66 limilimithara	tšepe ea sesebelisoa	khoele ea ka hare 4x M10x1.5 botebo ba 15 mm	50	2 x Ø8 H7 botebo ba 15 mm	4 x DIN EN ISO 4762 M12х1.75 10.9	80	2 x Ø8 H7 botebo ba 5 mm
		±10kN ±20kN ±50kN		tšepe ea sesebelisoa	khoele ea ka hare 4x M10x1.5 botebo ba 15 mm	60	2 x Ø8 H7 botebo ba 15 mm	4 x DIN EN ISO 4762 M12х1.75 10.9	100	2 x Ø8 H7 botebo ba 5 mm
	3A300	±50kN	300 limilimithara x 300 limilimithara x 100 limilimithara	tšepe ea sesebelisoa	khoele ea ka hare 4x M24x3	500	5x Ø25 H7	4 x DIN EN ISO 4762 M24х3 10.9	500	2 x Ø25 H7 botebo ba 40 mm
		±100kN ±200kN				800			800
	3A400	±500kN	400 limilimithara x 400 limilimithara x 100 limilimithara	tšepe ea sesebelisoa	khoele ea ka hare 4x M30x3.5	1800	5x Ø30 E7	4 x DIN EN ISO 4762 M30х3.5 10.9	1800	2 x Ø30 E7 botebo ba 40 mm

Sehlopha sa Interface Inc.

• 7401 East Butherus Drive
• Scottsdale, Arizona 85260 USA

Tšehetso

Mohala: 480.948.5555
Fax: 480.948.1924
www.interfaceforce.com

Litokomane / Lisebelisoa

Interface 3A Series Multi Axis Load Cells [pdf] Buka ea Taelo 3A Series, Multi Axis Load Cells, 3A Series Multi Axis Load Cells, Axis Load Cells

Litšupiso

• Bukana ea Mosebelisi