LIGHTRONICS TL4016 Memori Control Console
LIEKETSENG TS'OANELO
| Kakaretso ea likanale | 32 kapa 16 ho itšetlehile ka mokhoa |
| Mekhoa ea ts'ebetso | Liteishene tse 16 x litšoantšo tse 2 tsa buka, liteishene tse 32 x setšoantšo se le seng sa buka, liteishene tse 1 + le liketsahalo tse 16 tse rekotiloeng |
| Mehopolo ea sebaka | 16 litšoantšo kaofela |
| Lelekisa | 2 programmable 23 mehato ea ho lelekisa |
| Laola protocol | DMX-512 (LMX-128 multiplex boikhethelo) |
| Sehokedi se hlahisang | 5 pin XLR bakeng sa DMX-512 3 pin XLR bakeng sa khetho ea LMX-128 (E 'ngoe ea 3 pin XLR bakeng sa khetho ea DMX) |
| Ho lumellana | LMX-128 protocol e tsamaellana le litsamaiso tse ling tsa multiplexed |
| Ho kenya matla | 12 VDC, 1 Amp phepelo ea motlakase e tsoang kantle |
| Litekanyo | 16.25″WX 9.25″HX 2.5″H |
Likarolo tse ling tsa TL4016 li kenyelletsa: grand master fader, split-dripless crossfader, likonopo tsa "bump" tsa nakoana, le taolo ea ho tima. Mehato e 'meli ea mehato e 23 e ka tsamaisoa ka nako e le' ngoe bakeng sa mekhoa e rarahaneng. Sekhahla sa ho lelekisa se beoa ka ho tlanya konopo ea sekhahla ka sekhahla seo u se batlang. Lits'oants'o le likoloi tse bolokiloeng yuniti ha li lahlehe ha yuniti e tingoa
KEKETSO
TL4016 control console e lokela ho bolokoa hole le mongobo le mehloli e tobileng ea mocheso.
DMX CONNECTIONS: Hokela yuniti ho Bokahohle ba DMX u sebelisa thapo ea taolo e nang le likhokahanyo tsa XLR tse 5. Motlakase oa kantle o tlameha ho sebelisoa haeba ho sebelisoa feela sehokelo sa DMX 5 pin XLR. Khetho ea khetho e le 'ngoe feela ea 3-pin XLR e fumaneha.
LMX CONNECTIONS: Hokela yuniti ho Lightronics (kapa e lumellanang) dimmer u sebelisa thapo ea taolo ea multiplex e nang le likhokahano tsa 3 pin XLR. TL-4016 e tsamaisoa ke dimmer eo e hokahaneng le eona. E ka boela ea tsamaisoa ka motlakase oa kantle o ikhethelang. Yuniti e tla sebetsa ka li-dimmer ho NSI/SUNN le
Mefuta ea Lightronics. Li-dimmers tsohle tse hokahaneng le yuniti LI TŠOANTŠE ho ba ka mokhoa o TŠOANENG. Khetho ea LMX ha e fumanehe haeba ho khethiloe tlhahiso ea 3 pin XLR bakeng sa DMX ha o odara.
DMX-512 Connector Wiring (5 PIN/3 PIN FEMALE XLR)
|
PIN # |
PIN # | LEBITSO LETSATSI |
|
1 |
1 |
Tloaelehileng |
| 2 | 2 |
Lintlha tsa DMX |
|
3 |
3 | Lintlha tsa DMX + |
| 4 | – |
Ha e Sebediswe |
|
5 |
– |
Ha e Sebediswe |
LMX Connector Wiring (3 PIN FEMALE XLR)
|
PIN # |
LEBITSO LETSATSI |
|
1 |
Tloaelehileng |
|
2 |
Phantom matla ho tloha dimmers Ka tloaelo +15 VDC |
|
3 |
Letšoao la multiplex la LMX-128 |
MOLAOLI LE LITŠOANTŠI
- X Faders: Laola maemo a mocha ka mong bakeng sa likanale 1 - 16.
- Y Faders: Laola boemo ba liketsahalo kapa likanale ka bomong ho latela mokhoa oa hajoale oa ts'ebetso.
- Cross Fader: E fifala pakeng tsa X le Y mela e faders.
- Likonopo tsa Bump: E bula dikanale tse amanang ka matla ha o tobetsa.
- Chase Select: E bulela le ho tima chasi.
- Chase Rate: Tobetsa makhetlo a mararo kapa ho feta ka sekhahla seo u se batlang ho seta lebelo la ho lelekisa.
- Lipontšo tsa Mokhoa oa Y: Hlahisa mokhoa oa hajoale oa ts'ebetso oa li-fader tsa Y.
- Konopo ea Mokhoa oa Y: E khetha mokhoa oa ho sebetsa oa li-fader tsa Y.
- Konopo ea Blackout: E bulela le ho tima tlhahiso ea console ho tsoa lits'ebetsong tsohle, liteishene le ho lelekisa.
- Letšoao la Blackout: E bonesitsoe ha ho tima.
- Monghali e Moholo: E fetola boemo ba tlhahiso ea mesebetsi eohle ea console.
- Konopo ea ho Rekota: E tlaleha liketsahalo le mekhoa ea ho lelekisa.
- Sesupo sa Rekoto: Ho khanya ha ho lelekisa kapa ho rekota ketsahalo e ntse e sebetsa.
Fetileview
QALANG
CHASE RESET (E seta bocha ho litefello tse hlophisitsoeng tsa feme): Tlosa motlakase ho yuniti. Tšoara likonopo tsa CHASE 1 le CHASE 2. Kenya matla ho yuniti ha u ntse u tšoere likonopo tsena fatše. Tsoela pele ho tšoara likonopo ka metsotsoana e ka bang 5 ebe oa lokolla.
SCENE ERASE (E hlakola lits'oants'o tsohle): Tlosa matla ho yuniti. Tšoara konopo ea RECORD. Kenya matla ho yuniti ha u ntse u tšoere konopo ena fatše. Tsoela pele ho tobetsa konopo ka metsotsoana e ka bang 5 ebe oa e lokolla
U lokela ho hlahloba litlhophiso tsa aterese tsa dimmers pele u tsoela pele ka ts'ebetso ea TL4016.
MEKHOA EA HO SEBETSA
TL4016 e khona ho sebetsa ka mekhoa e meraro e fapaneng mabapi le li-fader tsa Y. Ho tobetsa konopo ea "Y MODE" ho fetola tšebetso ea li-fader tsa Y (ka tlase tse leshome le metso e tšeletseng). Mokhoa o khethiloeng o bontšoa ke li-LED tsa mokhoa oa Y. X (fader tse ka holimo tse leshome le metso e tšeletseng) LI lula li laola boemo ba liteishene 1 ho isa ho 16.
- “CH 1-16” Mokhoeng ona ka bobeli mela ea X le Y ea li-fader e laola mecha ea 1 ho ea ho ea 16. Sefate sa sefapano se sebelisetsoa ho fetisa taolo pakeng tsa X le Y.
- “CH 17-32” Ka mokhoa ona li-faders tsa Y li laola liteishene tsa 17 ho isa ho tse 32.
- “KETSAHALO 1-16” Ka mokhoa ona li-fader tsa Y li laola matla a liketsahalo tse 16 tse rekotiloeng.
KAKARETSO MOLAOLI
LITŠOANTŠISO TSA LITŠOANTŠISO: Sefate sa sefapano se u thusa ho fifala lipakeng tsa lifahla tse kaholimo (X) le tse tlase (Y).
Mosebetsi oa cross fade o arotsoe likarolo tse peli ho u fa bokhoni ba ho laola boemo ba lihlopha tse ka holimo le tse tlaase tsa li-fader ka bomong. Ka mekhoa eohle, X cross fader e tlameha ho ba UP ho kenya li-fader tse ka holimo mme Y cross fader e tlameha ho ba DOWN ho kenya li-fader tse tlase.
Monghali: Master level fader e laola boemo ba tlhahiso ea mesebetsi eohle ea console.
BUMP BUTTONS: Likonopo tsa nakoana li kenya likanale 1 ho isa ho 16 ha li ntse li tobetsoa. The master fader setting e ama boemo ba likanale tse kentsoeng ke li-bump bump. Likonopo tsa Bump HA li bulele liketsahalo.
CHASE 1 & 2 BUTTONS: Tobetsa ho khetha mekhoa ea ho lelekisa. Li-LED tsa Chase li tla khantša ha ho lelekoa ho sebetsa.
LELEKANG SEKOLO KONOLO: Tobetsa makhetlo a 3 kapa ho feta ka sekhahla seo u se batlang ho seta lebelo la ho lelekisa. Chase rate LED e tla benya ka sekhahla se khethiloeng.
KONOPO EA BLACKOUT: Ho tobetsa konopo ea blackout ho etsa hore likanale tsohle, litšoantšiso le lelekiso li fihle ho zero intensity. LED e ntšo e tla khantša neng kapa neng ha console e le ka har'a mokhoa oa ho tima.
REKOTA KONANE: Tobetsa ho rekota liketsahalo le ho lelekisa lipaterone. Rekota LED e tla khantša ha e le boemong ba ho rekota.
TLALEHANG LEQETHA
- Tobetsa konopo ea "RECORD", rekoto ea LED e tla khanya.
- Tobetsa konopo ea "CHASE 1" kapa "CHASE 2" ho khetha ho lelekisa ho rekota.
- Sebelisa li-fader tsa kanane ho hlophisa likanale tseo u batlang ho ba ho tsona mohatong ona hore li be matla ka botlalo.
- Tobetsa konopo ea "RECORD" ho boloka mohato le ho fetela mohatong o latelang.
- Pheta mehato ea 3 le ea 4 ho fihlela mehato eohle e lakatsehang e ngotsoe (ho fihla ho mehato e 23).
- Tobetsa konopo ea "CHASE 1" kapa "CHASE 2" ho tsoa molemong oa ho rekota.
LELEKANG TS'OANE
- Tobetsa konopo ea "RATE" makhetlo a 3 kapa ho feta ka sekhahla seo u se batlang ho beha lebelo la ho lelekisa.
- Tobetsa “CHASE 1” kapa “CHASE 2” ho bulela le ho tima chase.
Hlokomela: Ho lelekisa ka bobeli ho ka etsahala ka nako e le 'ngoe. Haeba ho lelekisa ho na le mehato e fapaneng, ho ka etsoa mekhoa e rarahaneng ea ho fetola.
TLALEHONG MAKOANE
- Kenya ts'ebetsong mokhoa oa "CHAN 1– 16" kapa "CHAN 17-32" Y 'me u etse hore ketsahalo e rekote ka ho beha li-fader maemong a batloang.
- Tobetsa "RECORD".
- Tobetsa konopo ea bump ka tlase ho Y fader eo u lakatsang ho rekota ketsahalo ho eona.
Hlokomela: Lits'oants'o li kanna tsa rekotoa ka "SCENE 1-16" Y mode. Sena se o nolofalletsa ho kopitsa ketsahalo ho e 'ngoe kapa ho theha mefuta e fetotsoeng ea liketsahalo kapele. Ho rekota ho etsahala leha BLACKOUT e butse kapa master fader e theohile.
SEBAKA TS'OANELO
- Khetha mokhoa oa "SCENE 1-16" Y.
- Tlisa fader moleng o ka tlase (Y fader) e nang le ketsahalo e tlalehiloeng ho eona.
Hlokomela hore Y cross fader e tlameha ho ba FASE ho sebelisa li-fader tse tlase (Y).
LMX TŠEBELETSO
Haeba khetho ea LMX e kentsoe ho TL4016 joale e tla fetisa matšoao a mabeli a DMX le LMX ka nako e le 'ngoe. Haeba matla a TL4016 a fanoa ke dimmer ea LMX ka pin 2 ea sehokelo sa LMX - XLR, joale motlakase oa kantle ha o hlokehe. Khetho ea LMX ha e fumanehe haeba ho khethiloe tlhahiso ea 3 pin XLR bakeng sa DMX ha o odara.
PHAKAMA TS'OANELO
Sekoahelo se ka tlase sa TL4016 se na le litaelo tse khutšoane tsa ho sebelisa litšoantšo le ho lelekisa. Litaelo ha lia rereloa ho nka sebaka sa bukana ena 'me li lokela ho ba joalo viewed e le "likhopotso" bakeng sa basebelisi ba seng ba ntse ba tseba ts'ebetso ea TL4016.
TS'OANELO LE TOKA
HO BATLE PHOSO
Sheba hore na adaptara ea motlakase ea AC kapa ea DC e fana ka matla ho TL4016.
Ho nolofatsa ho rarolla mathata – seta yuniti botjha ho fana ka maemo a tsebahalang.
Etsa bonnete ba hore li-switches tsa dimmer diaterese li behiloe ho likanale tse lakatsehang.
TS'ELISO MOHAPI
Tsela e molemohali ea ho lelefatsa bophelo ba TL4016 ea hau ke ho e boloka e omme, e pholile, e hloekile ebile e koahetsoe ha e sa sebelisoe.
Karolo e kantle e ka hloekisoa ka lesela le bonolo dampe kentsoeng ka motsoako o bobebe oa sesepa / metsi kapa mochini o hloekisang oa mofuta oa sprayon o bobebe. U SE KE UA TŠASA MOLELEKI OFE KA TENG yuniting. U SE KE UA NOA yuniti ka har'a mokelikeli ofe kapa ofe kapa ho lumella mokelikeli ho kena taolong. U SE KE UA SEBELISA lihloekisi life kapa life tse thehiloeng ho solvent kapa abrasive yuniti.
Li-faders ha li hloeke. Haeba u sebelisa sehloeki ho tsona - se tla tlosa lubrication ho tloha libakeng tse thellang. Hang ha sena se etsahala ho ke ke ha khoneha ho li tlotsa hape.
Lithapa tse tšoeu ka holim'a li-fader ha li koaheloe ke waranti ea TL4016. Haeba u li tšoaea ka enke leha e le efe e sa feleng, pente joalo-joalo ho ka etsahala hore u se ke ua khona ho tlosa matšoao ntle le ho senya marapo.
Ha ho na likarolo tse sebelisoang ke basebelisi yuniti. Ts'ebeletso e etsoang ke ba bang ntle le baemeli ba lumelletsoeng ba Lightronics e tla hlakola waranti ea hau.
LITSEBISO TSA KAHLOLO EA MATLA A KA NTLE
TL4016 e kanna ea tsamaisoa ke phepelo ea kantle e nang le lintlha tse latelang
Khumo Voltage: 12 VDC
Sephetho sa hajoale: 800 Milliamps bonyane
Sehokedi: 2.1mm sehokedi sa mosadi
Center Pin: Polarity e ntle (+).
THUSO EA HO SEBELISA LE TLOBELO
Basebeletsi ba Dealer le Lightronics Factory ba ka u thusa ka mathata a ts'ebetso kapa a tlhokomelo. Ka kopo bala likarolo tse sebetsang tsa bukana ena pele u kopa thuso.
Haeba tšebeletso e hlokahala - ikopanye le morekisi eo u rekileng unit ho eena kapa ikopanye le Lightronics, Service Dept., 509 Central Drive, Virginia Beach, VA 23454 TEL: 757-486-3588.
|
Litokomane / Lisebelisoa
 |
LIGHTRONICS TL4016 Memori Control Console [pdf] Buka ea Mong'a TL4016, Memory Control Console, Control Console, Memory Console, TL4016, Console |
