• E fumaneha ka litlhophiso tsa liteishene tsa 6 le 9
• Toroidal high capacity transformer e lekantsoe ho 1.25AMP (30VA)
• Mananeo a 3, e 'ngoe le e' ngoe e na le linako tse 4 tsa ho qala, boholo ba linako tse 12 tsa ho qala ka letsatsi
• Linako tsa seteishene ho tloha motsotsong o le mong ho isa ho lihora tse 1 le metsotso e 12
• Likhetho tsa ho nosetsa tse ka khethoang: Khetho ea matsatsi a 7 ea motho ka mong, Leha e le, Odd, Odd -31, khetho ea letsatsi la ho nosetsa ho tloha letsatsi le leng le le leng ho isa ho la 15.
• Karolo ea ho nosetsa ea tekanyetso ea metsi e lumella ho lokisoa ha linako tsa ho tsamaisa seteishene ka liperesentetage, ho tloha ho OFF ho ​​isa ho 200%, ka khoeli
• Kenyelletso ea sensor ea pula ho tima liteishene nakong ea pula
• Karolo ea memori e sa feleng e boloka mananeo a othomathike nakong ea ho tima matla
• Mesebetsi ea matsoho bakeng sa ts'ebetso ea lenaneo le seteishene
• Sephetho sa pompo ho khanna khola ea 24VAC
• Oache ea nako ea 'nete e tšehelitsoe ka betri ea 3V Lithium
• Sebopeho sa ho hopola konteraka

Litaelo tsa Tšebeliso ea Sehlahisoa

Mokhoa o nepahetseng oa ho eketsa matla

1. Hokela selaoli ho matla a AC.
2. Kenya betri ea 9V ho lelefatsa bophelo ba betri ea chelete ea tšepe.

LenaneoBeha Lenaneo la Boiketsetso:

Tšebetso ea ManualHo tsamaisa seteishene se le seng:

FAQs

Nka beha matsatsi a ho nosetsa joang?Ho beha matsatsi a ho nosetsa, e-ea karolong ea lenaneo ebe u khetha khetho ea matsatsi a ho nosetsa. Khetha ho tsoa likhethong tse joalo ka khetho ea motho ka mong matsatsi a 7, Esita le, Odd, joalo-joalo, ho latela litlhoko tsa hau.

Karolo ea sensor ea pula e sebetsa joang?Kenyelletso ea sensor ea pula e tla tima liteishene tsohle kapa liteishene tse khethiloeng ka bo eona ha e lemoha maemo a metsi. Netefatsa hore sensor ea pula e kentsoe 'me e hokahantsoe hantle hore sesebelisoa sena se sebetse.

Selelekela

• Pro469 Multi-Program Noise Control Controller ea hau e fumaneha maemong a 6 le 9 a liteishene.
• E etselitsoe ho fana ka lits'ebetso tse fapaneng ho tloha sebakeng sa bolulo le sa khoebo, ho ea ho temo e bobebe, le kereche ea litsebi.
• Taolo ena e na le mananeo a ka bang 3 a arohaneng a qalang ho fihla ho 12 ka letsatsi. Mookameli o na le kemiso ea ho nosetsa ea matsatsi a 7 e nang le khetho ea letsatsi le leng le le leng ka lenaneo kapa almanaka ea 365 bakeng sa ho nosetsa ka mokhoa o sa tloaelehang / esita le letsatsi kapa kemiso ea ho nosetsa ea nako e khethiloeng ho tloha letsatsi le leng le le leng ho isa letsatsing le leng le le leng la 15. Liteishene ka bomong li ka abeloa lenaneo le le leng kapa kaofela 'me li ka ba le nako ea ho matha ea motsotso o le mong ho isa ho lihora tse 1 metsotso e 12 kapa lihora tse 59 haeba tekanyetso ea metsi e behiloe ho 25%. Hona joale e na le "Water Smart Seasonal Set" e lumellang linako tsa ho sebetsa ka boiketsetso hore li fetoloe ka liperesentetage ho tloha ho "OFF" ho ea ho 200% ka khoeli.
• Haesale re amehile ka tšebeliso e tsitsitseng ea metsi. Molaoli o na le likarolo tse ngata tsa ho boloka metsi tse ka sebelisoang ho boloka boemo bo phahameng ka ho fetisisa ba boleng ba semela ka tekanyo e fokolang ea tšebeliso ea metsi. Setsi sa tekanyetso se kopaneng se lumella liphetoho tsa lefats'e tsa linako tsa ho matha ntle le ho ama linako tsa ho matha tse hlophisitsoeng. Sena se lumella ho fokotsa tšebeliso ea metsi ka matsatsi a mouoane o fokolang.

Mokhoa o nepahetseng oa ho eketsa matla

1. Hokela ho Matla a AC
2. Kenya betri ea 9V ho eketsa bophelo ba betri ea chelete ea tšepe
   Libetri li tla boloka oache

Likaroloana

• 6 le 9 mefuta ea liteishene
• Toroidal high capacity transformer e lekantsoe ho 1.25AMP (30VA)
• Moetso oa kantle o nang le transformer e hahelletsoeng e kenyelletsa lead le plug, bakeng sa Australia
• Mananeo a 3, e 'ngoe le e' ngoe e nang le linako tse 4 tsa ho qala, boholo ba linako tse 12 tsa ho qala ka letsatsi
• Linako tsa seteishene ho tloha motsotsong o le mong ho isa ho lihora tse 1 le metsotso e 12
• Likhetho tsa ho nosetsa tse ka khethoang: Khetho ea matsatsi a 7 ea motho ka mong, Leha e le, Odd, Odd -31, khetho ea letsatsi la ho nosetsa ho tloha letsatsi le leng le le leng ho isa ho la 15.
• Karolo ea ho nosetsa ea tekanyetso e lumella ho lokisoa ka potlako ha linako tsa ho tsamaisa seteishene ka liperesentetage, ho tloha ho OFF ho ​​isa ho 200%, ka khoeli
• Kenyelletso ea sensor ea pula e tla tima liteishene tsohle kapa liteishene tse khethiloeng nakong ea lipula, haeba sensor e kentsoe
• Karolo ea memori e sa feleng e tla boloka mananeo a othomathike nakong ea ho felloa ke matla
• Mesebetsi ea matsoho: tsamaisa lenaneo kapa sehlopha sa mananeo hang, tsamaisa seteishene se le seng, se nang le potoloho ea liteko bakeng sa liteishene tsohle, OFF boemo ba ho emisa potoloho ea metsi kapa ho emisa mananeo a othomathiki nakong ea mariha.
• Pompo e hlahisoang ho khanna 24VAC coil L oache ea sebele ea nako e tšehelitsoeng ka 3V
• Betri ea lithium (e kentsoeng pele)
• Sebopeho sa ho hopola konteraka

Fetileview

Lenaneo

Taolo ena e entsoe ka mananeo a 3 a arohaneng ho lumella libaka tse fapaneng tsa tikoloho ho ba le linako tsa tsona tsa ho nosetsa
LENANEO ke mokhoa oa ho kopanya liteishene (li-valve) tse nang le litlhoko tse tšoanang tsa ho nosetsa ho nosetsa ka matsatsi a tšoanang. Liteishene tsena li tla nosetsa ka tatellano le ka matsatsi a khethiloeng.

• Kopanya liteishene (li-valve) tse nosetsang libaka tse tšoanang tsa naha hammoho. Bakeng sa mohlalaample, turf, libethe tsa lipalesa, lirapa-lihlopha tsena tse fapaneng li ka hloka linako tsa ho nosetsa ka bomong, kapa MANENO.
• Beha nako ea hajoale le letsatsi le nepahetseng la beke. Haeba ho tla sebelisoa metsi a sa tloaelehang kapa a letsatsi, etsa bonnete ba hore selemo sa hona joale, khoeli le letsatsi la khoeli li nepahetse.
• Ho khetha LENANEO le fapaneng, tobetsa . Mongolo o mong le o mong o tla ea nomorong e latelang ea PROGRAM. Sena se na le thuso bakeng sa re ka potlakoviewing ea tlhahisoleseling e kentsoeng pele ntle le ho lahleheloa ke sebaka sa hau sa potoloho ea mananeo

Beha Automatic Program

Beha PROGRAM ea othomathike bakeng sa sehlopha ka seng sa liteishene (li-valve) ka ho tlatsa mehato e meraro e latelang:

1. Beha ho nosetsa ho QALA TIMES
   Nakong e 'ngoe le e 'ngoe ea ho qala, liteishene (li-valve) tse khethiloeng bakeng sa LENANEO li tla hlaha ka tatellano. Haeba linako tse peli tsa ho qala li behiloe, liteishene (li-valve) li tla tla habeli
2. Beha MATSATSI A METSI
3. Beha nako ea RUN TIME

Taolo ena e etselitsoe ho etsa mananeo a potlakileng. Hopola lintlha tsena tse bonolo tsa ho etsa mananeo a mahala:

• Tobetsa e le 'ngoe ea konopo e tla eketsa yuniti e le' ngoe
• Ho tšoara konopo fatše ho tla phalla ka potlako ka har'a li-unit Nakong ea lenaneo, ke li-unit tse khanyang feela tse khonang ho hlophisoa.
• Fetola li-unit tse benyang u sebelisa
• Tobetsa ho tsamaisetsa ho di-setting kamoo o batlang
• MAIN DIAL ke sesebelisoa sa mantlha sa ho khetha tšebetso
• Tobetsa ho khetha MANENO a fapaneng. E 'ngoe le e' ngoe e tobetsa konopo ena e tla eketsa nomoro e le 'ngoe ea PROGRAM

Beha Nako ea Hona Joale, Letsatsi le Letsatsi

1. Fetolela ho letsetsa ho DATE+TIME
2. Sebelisa ho lokisa metsotso e benyang
3. Tobetsa ebe o sebedisa ho lokisa lihora tse benyang AM/PM e tlameha ho hlophisoa ka nepo.
4. Tobetsa ebe o sebedisa ho lokisa matsatsi a benyang a beke
5. Tobetsa kgafetsa ho fihlela letsatsi la khalendara le hlaha pontshong mme selemo se benya
   Khalendara e hloka feela ho beoa ha u khetha ho nosetsa ho sa tloaelehang / esita le letsatsi
6. Sebelisa ho lokisa selemo
7. Tobetsa ebe o sebedisa ho lokisa kgwedi e benyang
8. Tobetsa ebe o sebedisa ho lokisa letsatsi le phatsimang
   Ho khutlela oacheng, khutlisetsa ho daela ho AUTO

Beha Linako Tsa ho Qala

Liteishene tsohle li tla sebetsa ka tatellano ea nako ea ho qala
Bakeng sa example, re tla beha NAKO QALANG bakeng sa PROG No. 1

1. Fetolela mohala ho START TIMES 'me u netefatse hore PROG No. 1 ea hlaha
   Haeba ho se joalo, tobetsa ho potoloha MANENO ebe o khetha PROG No. 1
2. QALA No. e tla benya
3. Sebelisa ho fetola QALA No. ha ho hlokahala
4. Tobetsa 'me lihora tsa QALA No. ea hau e khethiloeng li tla khanya
5. Sebelisa ho lokisa ha ho hlokahala
   Netefatsa hore AM/PM e nepahetse
6. Tobetsa mme metsotso e tla benya
7. Sebelisa ho lokisa ha ho hlokahala
   LENANEO le leng le le leng le ka ba le ho fihla ho 4 QALA TIMES
8.  Ho seta NAKO e eketsehileng, tobetsa le QALA No. 1 e tla benya
9. Tsoela pele ho QALA No. 2 ka ho tobetsa
10. Latela mehato ea 4-7 ka holimo ho seta NAKO YA HO QALA bakeng sa QALA No. 2
    Ho bulela kapa ho tima NAKO QALANG, sebelisa kapa ho beha lihora le metsotso ka bobeli ho zero
    Ho potoloha le ho fetola PROGRAMS, tobetsa kgafetsa
    Beha Matsatsi a Nosetsang
    Yuniti ena e na le letsatsi la motho ka mong, letsatsi la EVEN/ODD, letsatsi la ODD-31 le khetho ea INTERVAL DAYS
    Khetho ea Letsatsi la Motho ka Mong:
    Fetolela ho letsetsa ho WATER DAYS 'me PROG No. 1 e tla hlaha
11. Haeba ha ho joalo, sebelisa ho khetha PROG No. 1
12. MON (Mantaha) e tla benya
13. Sebelisa ho nolofatsa kapa ho thibela ho nosetsa ka Mantaha ka ho latellana
14. Sebelisa ho potoloha matsatsi a beke
    Matsatsi a sebetsang a tla bontšoa le tlase
    ODD / EVEN Khetho ea Letsatsi
    Libaka tse ling li lumella feela ho nosetsa ka matsatsi a sa tloaelehang haeba palo ea ntlo e sa tloaeleha, kapa ka ho tšoanang bakeng sa matsatsi
    Fetolela ho letsetsa ho WATER DAYS 'me PROG No. 1 e tla hlaha
15. Tobetsa khafetsa ho potoloha FRI ho fihlela ODD DAYS kapa EVEN DAYS e bonts'a ka nepo
    Tobetsa hape bakeng sa ODD-31 ha ho hlokahala
    Khalendara ea matsatsi a 365 e tlameha ho hlophisoa ka nepo bakeng sa tšobotsi ena, (sheba Beha Nako ea Hona Joale, Letsatsi le Letsatsi)
    Taolo ena e tla nahanela lilemo tse ngata

Khetho ea Letsatsi la Khao

1. Fetolela ho letsetsa ho WATER DAYS 'me PROG No. 1 e tla hlaha
2. Tobetsa khafetsa ho potoloha FRI ho fihlela INTERVAL DAYS e hlaha ka nepo
   INTERVAL DAYS 1 e tla benya
   Sebelisa ho khetha nako ea matsatsi a 1 ho isa ho a 15
   Example: INTERVAL DAYS 2 e bolela hore molaoli o tla tsamaisa lenaneo ka nako ea matsatsi a 2
   Letsatsi le hlahlamang le sebetsang le lula le fetoloa ho 1, ho bolelang hore hosane ke letsatsi la pele le sebetsang la ho sebetsa

Beha Linako Tsa ho Run

• Ena ke bolelele ba nako eo seteishene ka seng (valve) se reretsoeng ho nosetsa ka lenaneo le itseng
• Nako e kholo ea ho nosetsa ke lihora tse 12 metsotso e 59 bakeng sa seteishene ka seng
• Seteishene se ka abeloa mananeo a 3 kapa a mang kapa a mang

1. Fetolela mohala ho RUN TIMES

   
   STATION No. 1 e tla benya e ngotsoe hore OFF, joalokaha ho bontšitsoe ka holimo, ho bolelang hore ha e na RUN TIME e hlophisitsoeng ho eona.
   Mookameli o na le mohopolo o sa feleng kahoo ha ho na le ho hlōleha ha matla, le haeba betri e sa kenngoa, litekanyetso tse hlophisitsoeng li tla khutlisetsoa yuniti.
2. Tobetsa ho khetha nomoro ea seteishene (valve).
3. Tobetsa mme OFF e tla benya
4. Tobetsa ho lokisa RUN TIME metsotso ka moo o batlang
5. Tobetsa 'me lihora tsa RUN TIME li tla benya
6. Tobetsa ho lokisa lihora tsa RUN TIME kamoo u batlang
7. Tobetsa 'me Nomoro ea STATION e tla benya hape
8. Tobetsa kapa ho khetha seteishene se seng (belofo), 'me u phete mehato ea 2-7 ka holimo ho seta NAKO E RUN
   Ho tima seteishene, beha lihora le metsotso hore e be 0, 'me skrineng se tla TIMA joalokaha ho bontšitsoe ka holimo
   Sena se phethela mokhoa oa ho seta oa PROG No. 1
   Beha Mananeo a Eketsehileng
   Beha mananeo a ho fihla ho 6 PROGRAMS ka ho tobetsa ha o theha STARTS TIMES, WATERING DAYS le RUN TIMES joalo ka ha ho boletsoe pejana
   Leha molaoli a tla tsamaisa li-program tsa othomathike ka MAIN DIAL maemong afe kapa afe (ntle le OFF), re khothaletsa ho siea mohala oa mantlha sebakeng sa AUTO ha o sa etse lenaneo kapa o sebetsa ka letsoho.

Tšebetso ea Manual

Matha Seteishene se le Mong

® Nako e phahameng ea ho matha ke lihora tse 12 metsotso e 59

1. Fetolela mohala ho RUN STATION
   Seteishene sa No. 1 se tla benya
   Nako ea ho sebetsa ea kamehla ke metsotso e 10-ho hlophisa sena, bona Edita Default Manual Run Time ka tlase.
2. Sebelisa ho kgetha seteishene se batloang
   Seteishene se khethiloeng se tla qala ho sebetsa 'me RUN TIME e tla fokotseha
   Haeba ho na le pompo kapa valve e kholo e hokahaneng,
   PUMP A e tla bonts'oa ponts'o, e bonts'a hore pompo / master e sebetsa
3. Tobetsa mme metsotso ya RUN TIME e tla benya
4. Sebelisa ho lokisa metsotso
5. Tobetsa 'me lihora tsa RUN TIME li tla benya
6. Sebelisa ho lokisa dihora
   Yuniti e tla khutlela ho AUTO kamora hore nako e fete
   Haeba u lebala ho khutlisetsa mohala ho AUTO, molaoli o ntse a tla tsamaisa mananeo
7. Ho emisa ho nosetsa hanghang, retelehela ho TIMA

Fetola Nako ea ho Tsamaisa Manual

1. Fetola mohala ho RUN STATION No. 1 e tla benya
2. Tobetsa mme metsotso ya RUN TIME e tla benya
3. Sebelisa ho lokisa RUN TIME metsotso
4. Tobetsa 'me lihora tsa kamehla tsa RUN TIME li tla khanya
5. Sebelisa ho lokisa lihora tsa RUN TIME
6. Hang ha RUN TIME e lakatsehang e setiloe, tobetsa ho boloka sena e le bukana ea kamehla ea RUN TIME
   E ncha ea kamehla e tla hlaha kamehla ha mohala o fetoleloa ho RUN STATION

Tsamaisa Lenaneo

1. Ho tsamaisa lenaneo le felletseng ka bowena kapa ho bokella mananeo a mangata ho sebetsa, fetola mohala ho RUN PROGRAM
   OFF e tla benya skrineng
2. Ho bulela PROGRAM, tobetsa mme pontsho e tla fetohela ho ON
   Haeba ha ho RUN TIME e behiloeng bakeng sa PROGRAM e lakatsehang, mohato o ka holimo o ke ke oa sebetsa
   3. Ho tsamaisa PROGRAM eo o e batlang hanghang, tobetsa

Mananeo a ho bokella

• Ho ka ba le linako tseo ka tsona ho lakatsehang ho tsamaisa mananeo a fetang bonngoe ka letsoho
• Molaoli o lumella sena hore se etsahale a sebelisa sebaka sa eona se ikhethang sa ho nolofalletsa lenaneo, pele a le tsamaisa
• Bakeng sa mohlalaample, ho tsamaisa PROG No. 1 le PROG No. 2, molaoli o tla laola ho bokellana ha mananeo hore a se ke a kopana.

1. Latela mehato ea 1 le ea 2 ea Matha Lenaneo ho nolofalletsa LENANEO le le leng
2. Ho khetha PROGRAM e latelang tobetsa P
3. Numella PROGRAM e latelang ka ho tobetsa
   Ho tima nomoro ea lenaneo, tobetsa
4. Pheta mehato ea 2-3 ka holimo ho nolofalletsa MEKHOA e meng
5. Hang ha li-PROGRAM tsohle tse lakatsehang li se li lumelletsoe, li ka tsamaisoa ka ho tobetsa
   Joale molaoli o tla tsamaisa PROGRAM tsohle tse nolofalitsoeng ka tatellano ea tatellano
   Mokhoa ona o ka sebelisoa ho nolofalletsa leha e le efe, kapa mananeo ohle a teng ho molaoli.
   Ha o tsamaisa mananeo ka mokhoa ona, BUDGET % e tla fetola RUN TIMES ea seteishene ka seng ka nepo

Likarolo Tse Ling

Khaotsa ho Nosetsa

• Ho emisa kemiso ea ho nosetsa ea othomathike kapa ka letsoho, bulela mohala o TIMA
• Bakeng sa ho nosetsa ka boiketsetso hopola ho khutlisetsa mohala ho AUTO, kaha OFF e tla emisa lipotoloho life kapa life tse tlang tsa ho nosetsa hore li se ke tsa etsahala.

Stacking Start Times

• Haeba ka phoso u ka seta START TIME ho feta PROGRAM e le 'ngoe, molaoli o tla li beha ka tatellano ea tatellano.
• Tsohle tse hlophisitsoeng tsa START TIMES li tla nosetsoa ho tsoa ho palo e holimo pele

Backup e iketsang

• Sehlahisoa sena se kentsoe mohopolo o sa feleng.
  Sena se lumella molaoli ho boloka litekanyetso tsohle tse bolokiloeng leha ho se na mehloli ea matla, ho bolelang hore tlhahisoleseling e hlophisitsoeng e ke ke ea lahleha.
• Ho kenyelletsa betri ea 9V ho khothaletsoa ho lelefatsa bophelo ba betri ea tšepe empa e ke ke ea fana ka matla a lekaneng ho tsamaisa pontšo.
• Haeba betri e sa kenngoa, oache ea nako ea sebele e tšehetsoa ka betri ea tšepe ea lithium e kentsoeng fektheri - ha matla a khutlisa oache e tla khutlisetsoa nakong ea hona joale.
• Ho khothaletsoa hore betri ea 9V e kenngoe 'me e fetoloe likhoeling tse ling le tse ling tse 12
• Pontšo e tla bontša FAULT BAT skrineng ha betri e saletsoe ke beke hore e sebetse-ha sena se etsahala, khutlisetsa betri kapele kamoo ho ka khonehang.
• Haeba matla a AC a koetsoe, ponts'o e ke ke ea bonahala

Sensor ea pula

1. Ha u kenya sensor ea pula, qala ka ho tlosa sehokelo se kentsoeng fektheri lipakeng tsa li-terminals tsa C le R joalo ka ha ho bonts'itsoe

   
2. Fetola ka lithapo tse peli tse tsoang ho sensor ea pula ho ea ho li-terminals tsena, polarity HA E hlokehe
3. Fetolela konopo ea SENSOR ho ON
4. Fetolela mohala ho SENSOR ho nolofalletsa sensor ea hau ea pula bakeng sa liteishene ka bomong
   Mokhoa oa kamehla o BUTSE bakeng sa liteishene tsohle
   Haeba seteishene se ngotsoe ON skrineng, sena se bolela hore sensor ea hau ea pula e tla khona ho laola valve nakong ea pula.
   Ha u lokela ho ba le seteishene se hlokang ho nosetsoa kamehla, (joalo ka sethopo se koaletsoeng, kapa limela tse ka tlas'a sekoahelo) sensor ea pula e ka tima ho tsoela pele ho nosetsa nakong ea lipula.
5. Ho tima seteishene, tobetsa ho potoloha le ho khetha seteishene seo o se batlang, ebe o tobetsa
6. Ho bulela seteishene ho BUA, tobetsa
   Ho tima sensor ea pula le ho lumella liteishene tsohle ho noa metsi, fetola konopo ea SENSOR ho OFF

TEMOSO!
BOLOKA LIBETANE/BATANE TSE TŠECHA KAPA TSE SEBELISANG/LIKHOPI HO FIHLELA BANA.

Betri e ka baka likotsi tse mpe kapa tse bolaeang ka lihora tsa 2 kapa ka tlase ha e metsoa kapa e kenngoa ka har'a karolo efe kapa efe ea 'mele. Haeba u nahana hore libeteri li ka 'na tsa metsoa kapa li behiloe ka har'a karolo leha e le efe ea 'mele, batla thuso ea bongaka hang-hang

Ikopanye le Setsi sa Boitsebiso sa Chefo ea Australia bakeng sa 24/7 ka potlako, keletso ea litsebi: 13 11 26
Sheba litataiso tsa mmuso oa sebaka sa heno mabapi le mokhoa oa ho lahla ka nepo libetri tsa li-button/coin.

Pula Ho lieha

Ho lokisa nako ea sensor ea hau ea pula, molaoli enoa o na le tlhophiso ea RAIN DELAY
Sena se lumella nako e itseng ea ho lieha ho feta ka mor'a hore sensor ea pula e omelle pele seteishene se tla nosetsa hape.

1. Fetolela ho daela ho SENSOR
2. Tobetsa ho fihlella skrineng sa RAIN DELAY
   Theko ea INTERVAL DAYS e se e tla benya
3. Sebelisa ho fetola nako ea ho lieha ha pula ka keketseho ea lihora tse 24 ka nako
   Ho ka behoa tieho e kholo ea matsatsi a 9

Pompo Khokahano
Sehlopha sena se tla lumella liteishene ho abeloa pompo
Boemo ba kamehla ke hore liteishene tsohle li abetsoe PUMP A

1. Ho fetola liteishene ka bomong, fetola mohala hore e be PUMP
2. Tobetsa ho potoloha seteishene ka seng
3. Sebelisa ho fetola PUMP A ho ON kapa TIMA ka ho latellana

Bontša Phapang

1. Ho lokisa phapang ea LCD, fetola mohala hore e be PUMP
2. Tobetsa kgafetsa ho fihlela pontsho e bala CON
3. Sebelisa ho lokisa phapano ya pontsho ka moo o batlang
4. Ho boloka litlhophiso tsa hau, khutlisetsa ho daela ho AUTO

Tekanyetso ea Metsi le Tokiso ea Nako

® Seteishene sa Automatic RUN TIMES se ka fetoloa
ka peresentetage ha dihla di fetoha
L Sena se tla boloka metsi a bohlokoa joalo ka RUN TIMES
e ka fetoloa kapele nakong ea selemo, lehlabula, le
hoetla ho fokotsa kapa ho eketsa tshebediso ya metsi
® Bakeng sa ts'ebetso ena, ke ea bohlokoa
ho seta khalendara ka nepo–bona
Beha Nako ea Hona Joale, Letsatsi le Letsatsi bakeng sa lintlha tse ling

1. Fetolela mohala ho BUDGET-ponts'o e tla hlaha ka tsela e latelang:

   Sena se bolela hore RUN TIMES e behiloe ho BUDGET% ea 100%
   Ka tloaelo, ponts'o e tla bonts'a MONTH ea hajoale
   Bakeng sa mohlalaample, haeba STATION No. 1 e behiloe ho metsotso e 10 e tla sebetsa metsotso e 10
   Haeba BUDGET% e fetohela ho 50%, STATION No. 1 joale e tla sebetsa metsotso e 5 (50% ea metsotso e 10
   Palo ea tekanyetso e sebelisoa ho li-STATIONS tsohle tse sebetsang le RUN TIMES

2. Sebelisa ho potoloha likhoeli tse 1 ho isa ho tse 12
3. Sebelisa ho lokisa BUDGET% ka 10% increments bakeng sa khoeli le khoeli
   Sena se ka beoa khoeli le khoeli ho tloha ho OFF ho ​​isa ho 200%
   Tshebetso ya memori e sa feleng e tla boloka tlhahisoleseding
4. Ho khutlela oacheng, retelehela ho daela ho AUTO
5. Haeba BUDGET% ea khoeli ea hau ea hajoale e se 100%, sena se tla bontšoa skrineng sa oache ea AUTO.

Tšobotsi ea Pontšo ea Phoso

• Setsi sena se na le M205 1AMP fuse ea khalase ho sireletsa transformer ho tsoa ho matla a matla, le fuse ea elektroniki ho sireletsa potoloho ho tsoa liphosong tsa tšimo kapa tsa valve.
  Matšoao a latelang a phoso a ka hlahisoa:
  HA HO AC: Ha e hokahane le motlakase oa motlakase kapa transformer ha e sebetse
  FAULT BAT: Betri ea 9V ha e ea hokeloa kapa e hloka ho nkeloa sebaka

Teko ea Sisteme

1. Fetolela mohala ho TEST STATIONS
   Teko ea sistimi e tla qala ka bo eona
   PRO469 ea hau e tla nosetsa seteishene se seng le se seng ka tatellano metsotso e 2 se seng le se seng
2. Tobetsa ho fetela seteisheneng se latelang pele nako ea metsotso e 2 e feta
   Ha ho khonehe ho khutlela morao seteisheneng se fetileng
   Ho qala tekolo bocha ho tloha STATION No. 1, tima mohala hore o TIMA, ebe o khutlela ho TEST STATIONS.
   Ho Hlakola Mananeo
   Kaha yuniti ena e na le mohopolo o sa feleng, tsela e molemohali ea ho hlakola PROGRAMS ke e latelang:
3. Thibela ho daela ho TIMA
4.  Tobetsa habeli ho fihlela ponts'o e hlaha ka tsela e latelang:

   

5. Tobetsa ho hlakola MANENO ohle
   Oache e tla bolokoa, 'me mesebetsi e meng ea ho beha START TIMES, WATERING DAYS le RUN TIMES e tla hlakoloa ebe e khutlisetsoa litlhophisong tsa ho qala.
   PROGRAMS le tsona li ka hlakoloa ka ho ipehela START TIMES, WATERING DAYS le RUN TIMES ka bomong ho khutlela mekhoeng ea bona.

Lenaneo Pholoso Feature

1. Ho kenya Karolo ea Khopotso ea Lenaneo retelletsa mohala hore o TIMA tobetsa 'me ka nako e le' ngoe- LOAD UP e tla hlaha skrineng
2. Tobetsa ho qeta mokhoa ona
   Ho instola botjha Sebopeho sa Sehopotso sa Lenaneo, tima ho daela ebe o tobetsa
   LOAD e tla hlaha skrineng
   Tobetsa ho khutlela lenaneong la pele le bolokiloeng

Ho kenya

Ho kenya Mookameli

• Kenya selaoli haufi le phallo ea 240VAC-haholo-holo ka tlung, karacheng, kapa ka ntle ho cubicle ea motlakase.
• Bakeng sa ts'ebetso e bonolo, ho khothalletsoa ho beha boemo ba mahlo
• Ha e le hantle, sebaka sa hau sa taolo ha sea lokela ho ba le pula kapa libaka tse atisang ho ba le likhohola kapa metsi a mangata
• Taolo ena ea inbuilt e tla le transformer ea ka hare mme e loketse ho kenngoa ka ntle kapa ka hare
• Ntlo e etselitsoe ho kenngoa ka ntle empa plug e hloka ho kenngoa ka soketeng e thibelang boemo ba leholimo kapa ka tlas'a sekoahelo
• Tlamella selaoli u sebelisa senotlolo sa lesoba se behiloe ka ntle bohareng ba setsi le masoba a eketsehileng a behiloe ka hare tlas'a sekoahelo sa terminal.

Khokahano ea Motlakase

• Mosebetsi oohle oa motlakase o tlameha ho etsoa ho latela litaelo tsena, ho latela likhoutu tsohle tse sebetsang tsa lehae, tsa naha le tsa federal tse amanang le naha ea ho kenya - ho hloleha ho etsa joalo ho tla hlakola waranti ea molaoli.
• Hakolla phepelo ea motlakase e kholo pele mosebetsi ofe kapa ofe oa tokiso ho molaoli kapa li-valve o etsoa
• U se ke ua leka ho kenya terata leha e le efe e phahamengtaglintho ka bouena, ke hore, lipompo le likhokahano tsa pompo kapa lithapo tse thata tsa motlakase ho ea ho mains-ena ke sebaka sa ramotlakase ea nang le lengolo la tumello.
• Kotsi e tebileng kapa lefu li ka bakoa ke ho hokahana ka mokhoa o sa lokelang - haeba ho na le pelaelo, buisana le 'mele oa hau oa taolo mabapi le se hlokahalang.

Lihokelo tsa Wiring Field

1. Lokisetsa terata bakeng sa ho hoka ka ho seha lithapo ho bolelele bo nepahetseng le ho hlobola li-insurance tse ka bang 0.25 (6.0mm) ho tloha qetellong ho hokeloa ho molaoli.
2. Netefatsa hore li-screws tsa li-terminal block li lokollotsoe ka mokhoa o lekaneng ho lumella ho fihlella habonolo ha lipheletsong tsa terata
3. Kenya terata e hlobotseng lipheletsong tsa clamp lesoba le ho tiisa dikurufu
   Se ke oa tiisa ho feta tekano kaha sena se ka senya block block
   Boholo ba 0.75 amps e ka fanoa ke tlhahiso efe kapa efe
4. Lekola matla a ho kenella ha likhoele tsa hau tsa solenoid pele o hokela li-valve tse fetang tse peli seteisheneng sefe kapa sefe

Lihokelo tsa Phepelo ea Matla

• Ho khothaletsoa hore transformer ha e hokahane le phepelo ea 240VAC eo hape e sebeletsang kapa e fanang ka li-motor (joalo ka li-air conditioner, lipompo tsa matamo, lihatsetsi)
• Li-circuits tsa mabone li loketse joalo ka mehloli ea matla

Sebopeho sa Terminal Block Layout

1. 24VAC 24VAC khokahano ea phepelo ea motlakase
2. COM Khokelo e tloaelehileng ea terata ho wiring ea tšimo
3. SENS Input bakeng sa ho fetola pula
4. PUMP 1 Master valve kapa tlhahiso ea ho qala pompo
5. ST1–ST9 dikgokelo tsa lebala la Seteishene (valve).
   Sebelisa makhetlo a 2 amp fuse

Ho Kenya Li-valve le Khokelo ea Phepelo ea Matla

• Sepheo sa valve e kholo ke ho koala phepelo ea metsi tsamaisong ea nosetso ha ho e-na le valve e sa sebetseng hantle kapa ho se le e 'ngoe ea liteishene tse sebetsang hantle.
• E sebelisoa joalo ka valve ea ho boloka kapa ea ho felloa ke tšireletso 'me e kenngoa qalong ea tsamaiso ea nosetso moo e hokahaneng le mohala oa phepelo ea metsi.

Ho Kenya Valve ea Seteishene

• Ho fihlela ho li-valve tse peli tsa 24VAC tsa solenoid li ka hokeloa ho tlhahiso e 'ngoe le e 'ngoe ea seteishene 'me tsa hokeloa ho khutlela ho sehokelo se tloaelehileng (C)
• Ka bolelele ba lithapo tse telele, voltage droping e ka ba ea bohlokoa, haholo ha likhoele tse fetang bonngoe li hokeletsoe seteisheneng
• E le molao o motle, khetha thapo ea hau ka tsela e latelang: 0–50m cable dia 0.5mm
  • L 50–100m thapo e ka bang 1.0mm
  • L 100–200m thapo e ka bang 1.5mm
  • L 200–400m thapo e ka bang 2.0mm
• Ha u sebelisa li-valve tse ngata seteisheneng ka seng, terata e tloaelehileng e hloka ho ba kholoanyane ho tsamaisa hona joale. Maemong ana, khetha thapo e tloaelehileng ea boholo bo le bong kapa tse peli ho feta kamoo ho hlokahalang
• Ha u etsa likhokahano tšimong, sebelisa feela li-connectors tse tlatsitsoeng ka mafura kapa tse tlatsitsoeng ka mafura. Hangata mathata a hlaha ka lebaka la likhokahano tse fokolang. Ha khokahano e betere mona, 'me tiiso e thibelang metsi e betere ha sistimi e tla sebetsa ntle le mathata
• Ho kenya sensor ea pula, e kenye ka terata lipakeng tsa Common (C) le Rain Sensor (R) joalo ka ha ho bonts'itsoe.

  

Pump Start Relay Connection

• Taolo ena ha e fane ka matla a mantlha a ho khanna pompo - pompo e tlameha ho tsamaisoa ka relay ea kantle le seta ea sehokelo.
• Molaoli o fana ka molumo o tlasetage pontso hore actuates phetiso eo ka lehlakoreng le leng nolofalletsa contactor le qetellong pompo
• Le hoja molaoli a e-na le mohopolo o sa feleng 'me kahoo lenaneo la kamehla le ke ke la baka ts'ebetso e fosahetseng ea li-valve joaloka balaoli ba bang, e ntse e le mokhoa o motle ha o sebelisa mokhoa oo metsi a tsoang ho pompo ho hokahanya liteishene tse sa sebelisoeng setsing ho khutlela ho ea ho qetela. seteishene se sebedisoang
• Ha e le hantle, sena se thibela menyetla ea hore pompo e lule e matha khahlanong le hlooho e koetsoeng

Tšireletso ea Pompo (Teko ea Tsamaiso)

• Maemong a mang, ha se liteishene tsohle tsa ts'ebetso tse ka hokeloang - mohlalaample, haeba molaoli a ne a khona ho tsamaisa liteishene tsa 6 empa ho ne ho e-na le lithapo tsa masimo tse 4 feela le li-valve tsa solenoid tse fumanehang bakeng sa khokahano.
• Boemo bona bo ka beha kotsi ho pompo ha mokhoa oa tlhahlobo ea tsamaiso bakeng sa molaoli o qalisoa
• Mokhoa oa ho etsa liteko tsa sistimi o tsamaisana le liteishene tsohle tse teng ho selaoli
• Ho exampSena se tla bolela hore liteishene tsa 5 ho isa ho 6 li tla sebetsa 'me li etse hore pompo e sebetse khahlano le hlooho e koetsoeng
• Sena se ka baka tšenyo e sa feleng ea pompo, phala le sekepe sa khatello
• Ke ntho e tlamang haeba mokhoa oa tlhahlobo ea sistimi o tla sebelisoa, hore liteishene tsohle tse sa sebelisoeng, tse sa sebetseng, li hokahane hammoho ebe li hokeloa seteisheneng sa ho qetela sa tšebetso se nang le valve ho sona.
• Ho sebelisa mohlala onaample, sehokelo block e lokela ho ba le terata ho ea ka setšoantšo ka tlase

Ho kenngoa ha Pompo ea Mokhahlelo o le Mong
Ho kgothaletswa hore kamehla o sebelise relay pakeng tsa molaoli le mochine oa pompo

Ho batle phoso

Litlhaloso tsa Motlakase

Lihlahisoa tsa Motlakase

• Phepelo ea motlakase
  
  • Phepelo ea mantlha: Yuniti ena e sebelisa sesebelisoa se le seng sa 240 volt 50 hertz
  • Mookameli o hula 30 watt ho 240VAC
  • Transformer e ka hare e fokotsa 240VAC ho ea ho molumo o tlase o eketsehilengtage phepelo ea 24VAC
  • Transformer e ka hare e lumellana ka botlalo le AS/NZS 61558-2-6 'me e lekoa ka boikemelo le ho ahloleloa ho latela
  • Sehlopha sena se na le 1.25AMP matla a tlase, phetoho e phahameng ea toroidal e sebetsang hantle bakeng sa ts'ebetso ea bophelo bo bolelele
• Phepelo ea Matla a Motlakase:
  • Kenya 24 volts 50/60Hz
  • Lisebelisoa tsa Motlakase:
  • Boholo ba 1.0 amp
• Ho li-valve tsa Solenoid:
  • 24VAC 50/60Hz 0.75 amps max
  • Ho fihla ho li-valve tse 2 ka seteishene ka mokhoa o hahelletsoeng
• Ho Master Valve/Ho Qala Pompo:
  • 24VAC0.25 amps max
  • Bokhoni ba transfoma le fuse bo tlameha ho tsamaellana le litlhoko tsa tlhahiso

Tšireletso e Felletseng

• E tloaelehileng 20mm M-205 1 amp fuse ea khalase e potlakileng, e sireletsa khahlanong le ho phahama ha matla le fuse ea elektroniki e lekantsoeng ho 1AMP e sireletsa khahlanong le liphoso tsa masimo
• Mosebetsi o fosahetseng oa ho tlola seteishene

Ho Hloka Matla

• Mookameli o na le mohopolo o sa feleng le oache ea nako ea sebele, kahoo data e lula e tšehetsoa le ha ho se na matla ohle
• Yuniti e kentsoe fektheri ka betri ea lithium ea 3V CR2032 e nang le "backup" ea memori ea lilemo tse 10.
• Betri ea 9V ea alkaline e boloka data nakong ea motlakasetages, mme e khothaletsoa ho thusa ho boloka bophelo ba betri ea lithium
• Tampho sebetsa le yuniti ho tla hlakola waranti
• Libetri ha li tsamaise liphetho. Transformer e ka hare e hloka matla a maholo ho tsamaisa li-valve

Wiring
Lipotoloho tse hlahisoang li lokela ho kenngoa le ho sireletsoa ho latela khoutu ea mohala bakeng sa sebaka sa hau

Ho sebeletsa

Ho sebeletsa Mookameli oa hau
Molaoli o lokela ho lula a sebeletsoa ke moemeli ea lumelletsoeng. Latela mehato ena ho khutlisa yuniti ea hau:

1. Tlosa motlakase oa motlakase ho molaoli
   Haeba molaoli a e-na le mohala o thata, ho tla hlokahala hore setsebi sa motlakase se koetlisitsoeng se tlose yuniti kaofela, ho itšetlehile ka phoso.
2.  Tsoela pele ho hula le ho khutlisa molaoli kaofela ka transformer kapa o hakolle kopano ea phanele feela bakeng sa ho sebeletsa kapa ho lokisa.
3. Hakolla 24VAC e etellang pele liteisheneng tsa 24VAC ka letsohong le letšehali la block ea terminal.
4. Tšoaea kapa u khetholle lithapo tsohle tsa li-valve ho latela liteishene tseo li hoketsoeng ho tsona, (1–9)
   Sena se o nolofalletsa ho li khutlisetsa habonolo ho molaoli, ho boloka leano la hau la ho nosetsa li-valve
5. Hakolla lithapo tsa li-valve ho tloha bolokong ba theminale
6. Tlosa phanele e felletseng ho tsoa ntlong ea taolo ka ho hlakola li-screws tse peli likhutlong tse tlase tsa fascia (lipheletsong tse peli tsa block block)
7. Tlosa molaoli ka ho feletseng leboteng le ntšang motlakase
8. Koaela phanele kapa molaoli ka hloko ka ho phuthela ka mokhoa o sireletsang 'me u phuthe ka lebokoseng le loketseng ebe u khutlela ho moemeli oa hau oa litšebeletso kapa moetsi.
   Tampho sebetsa le yuniti ho tla hlakola waranti.
9. Fetola sebaka sa taolo ea hau ka ho fetola mokhoa ona.
   Molaoli o lokela ho lula a sebeletsoa ke motho ea lumelletsoeng

Tiisetso

Guarantee ea Phetolo ea selemo se 3

• Holman o fana ka tiiso ea lilemo tse 3 ka sehlahisoa sena.
• Australia thepa ea rona e tla le litiisetso tse ke keng tsa behelloa ka thoko tlas'a Molao oa Bareki oa Australia. U na le tokelo ea ho khutlisetsoa kapa ho khutlisetsoa ho hloleha ho hoholo le matšeliso bakeng sa tahlehelo kapa ts'enyehelo e 'ngoe e ka bonoang esale pele. U boetse u na le tokelo ea hore thepa e lokisoe kapa e nkeloe sebaka se seng haeba thepa e hloleha ho ba boleng bo amohelehang 'me ho hloleha ha ho bolele ho hloleha ho hoholo.
• Hammoho le litokelo tsa hau tsa molao tse boletsoeng ka holimo le litokelo life kapa life tse ling le litokiso tseo u nang le tsona tlas'a melao leha e le efe e amanang le sehlahisoa sa hau sa Holman, re boetse re u fa tiisetso ea Holman.
• Holman o tiisa sehlahisoa sena khahlano le likoli tse bakiloeng ke moetso o fosahetseng le lisebelisoa bakeng sa ts'ebeliso ea lapeng ea lilemo tse 3 ho tloha ka letsatsi la theko. Nakong ena ea tiisetso Holman o tla nkela sehlahisoa sefe kapa sefe se nang le phoso sebaka. Sephuthelo le litaelo li ka 'na tsa se ke tsa nkeloa sebaka ntle le haeba li na le phoso.
• Haeba sehlahisoa se nkeloa sebaka ka nako ea tiisetso, tiisetso ea sehlahisoa se tla felloa ke nako ka lilemo tse 3 ho tloha ka letsatsi la theko ea sehlahisoa sa mantlha, eseng lilemo tse 3 ho tloha ka letsatsi la ho nchafatsoa.
• Ho ea moo molao o lumelletsoeng, Tiisetso ena ea Phetoho ea Holman ha e kenyeletse boikarabelo ba tahlehelo e itseng kapa tahlehelo leha e le efe kapa tšenyo e bakiloeng thepa ea batho e hlahang ka lebaka lefe kapa lefe. Hape ha e kenyeletse likoli tse bakoang ke hore sehlahisoa ha se sebelisoe ho latela litaelo, tšenyo ea kotsi, tšebeliso e mpe, kapa ho ba t.ampe fanoang ke batho ba sa lumelloeng, ha e kenyeletse ho taboha ho tloaelehileng, 'me ha e lefelle litšenyehelo tsa ho etsa tleleime tlas'a tiisetso kapa ho tsamaisa thepa ho ea le ho tsoa sebakeng seo re se rekileng.
• Haeba u belaela hore sehlahisoa sa hau se na le phoso 'me u hloka tlhaloso kapa keletso ka kopo ikopanye le rona ka ho toba:
  1300 716 188
  support@holmanindustries.com.au
  11 Walters Drive, Osborne Park 6017 WA
• Haeba u na le bonnete ba hore sehlahisoa sa hau se na le phoso 'me se tlas'a lipehelo tsa tiisetso ena, u tla hloka ho hlahisa sehlahisoa sa hau se nang le bothata le rasiti ea hau ea theko e le bopaki ba hore u rekile sebakeng seo u se rekileng ho sona, moo morekisi a tla nkela sehlahisoa sebaka. uena molemong oa rona.

Re leboha haholo ho ba le uena joalo ka moreki, 'me re rata ho leboha ha u re khethile. Re khothaletsa ho ngolisa sehlahisoa sa hau se secha ho rona websebaka. Sena se tla netefatsa hore re na le kopi ea theko ea hau le ho kenya waranti e atolositsoeng. Lula u ntse u tseba lintlha tse mabapi le sehlahisoa le limpho tse khethehileng tse fumanehang ka koranta ea rona.

www.holmanindustries.com.au/product-registration/
Ke leboha hape ka ho khetha Holman