Beijer ELECTRONICS GT-5424 PWM Output Module
Litlhaloso
- Mohlala: GT-5424 PWM Output Module
- Mofuta oa Tlhahiso: Mohloli
- Mofuta oa Terminal: Cage Clamp, 18 pt removable terminal
- Lethathamo la boitsebiso: 131848
- Letsatsi: 2024-07-13
Litlhaloso tsa Tikoloho
| Mocheso oa ho sebetsa | -20°C – 60°C |
| UL mocheso | -20°C – 60°C |
| Mocheso oa polokelo | -40°C – 85°C |
| Mongobo o amanang | 5% - 90% e sa lumellaneng |
| Ho phahamisa | DIN seporo |
| Ts'ebetso ea ts'oenyeho | IEC 60068-2-27 (15G) |
| Khanyetso ea ho thothomela | IEC 60068-2-6 (4 g) |
| Likhase tsa indasteri | EN 61000-6-4/A11: 2011 |
| Tšireletso ea indasteri | EN 61000-6-2: 2019 |
| Boemo ba ho kenya | E otlolohileng le e tshekaletseng |
| Setifikeiti sa lihlahisoa | CE, FCC, UL, cUL |
Litlhaloso Kakaretso
| Ho felloa ke matla | Max. 80 mA @ 5 VDC |
| Ho behwa ka thoko | I/O ho Logic: Ho itšehla thajana ha Photocoupler Matla a tšimong: Ho se itšehle thajana |
| UL matla a tšimo | Phepelo voltage: 24 VDC lebitso, Sehlopha sa 2 |
| Matla a tšimo | Phepelo voltage: 24 VDC lebitso la Moqtagmefuta e fapaneng: 15-30 VDC Ho felloa ke matla: Max. 15 mA @ 24 VDC ntle le mojaro |
| Mohala o le mong | I/O Cable Max. 0.823mm² (AWG18) |
| Boima ba 'mele | 63 g |
| Boholo ba module | 12 mm x 109 mm x 70 mm |
Litaelo tsa Tšebeliso ea Sehlahisoa
Ho kenya le ho seta
- Ho hlongoa: Kenya mojule ka mokhoa o sireletsehileng ho seporo sa DIN ho latela litataiso tse fanoeng.
- Thibelo ea Sethala: Hloekisa le ho hokela likhoele ho block ea theminale e ntshuwang ho latela litaelo.
Mabapi le Bukana ena
Bukana ena e na le tlhahisoleseding e mabapi le software le likarolo tsa hardware tsa Beijer Electronics GT-5424 PWM Output Module. E fana ka litlhaloso tse tebileng, tataiso mabapi le ho kenya, ho seta, le tšebeliso ea sehlahisoa.
Matshwao a Sebedisitsweng Bukaneng ena
Sengoliloeng sena se kenyelletsa Temoso, Tlhokomeliso, Tlhokomeliso le matšoao a Bohlokoa moo ho loketseng, ho supa lintlha tse amanang le polokeho, kapa lintlha tse ling tsa bohlokoa.
Matšoao a tšoanang a lokela ho hlalosoa ka tsela e latelang:
TLHOKOMELO
Letšoao la Tlhokomeliso le bontša boemo bo ka bang kotsi boo, ha bo sa qojoe, bo ka bakang lefu kapa kotsi e mpe, le tšenyo e kholo sehlahisoa.
TLHOKOMELO
Letšoao la Tlhokomeliso le bontša boemo bo ka bang kotsi boo, ha bo sa qojoe, bo ka bakang kotsi e nyane kapa e itekanetseng, le tšenyo e itekanetseng sehlahisoa.
HLOKOMELA
Letšoao la Note le hlokomelisa 'mali ka lintlha le maemo a amehang.
BOHLOKOA
Letšoao la Bohlokoa le totobatsa lintlha tsa bohlokoa.
Polokeho
Pele o sebelisa sehlahisoa sena, ka kopo bala bukana ena le libuka tse ling tse amehang ka hloko. Ela hloko ka botlalo litaelo tsa polokeho!
Leha ho le joalo, Beijer Electronics e ke ke ea ikarabella kapa ea ikarabella bakeng sa tšenyo e bakiloeng ke tšebeliso ea sehlahisoa sena. Litšoantšo, mohlalaampLits'oants'o le litšoantšo bukeng ena li kenyelelitsoe molemong oa ho etsa litšoantšo. Ka lebaka la mefuta e mengata e fapaneng le litlhoko tse amanang le ts'ebetso efe kapa efe e itseng, Beijer Electronics e ke ke ea nka boikarabello kapa boikarabello bakeng sa ts'ebeliso ea 'nete e ipapisitseng le maemo a khale.amples le litšoantšo.
Setifikeiti sa Sehlahisoa
Sehlahisoa se na le litifikeiti tse latelang tsa sehlahisoa.
Litlhoko tse akaretsang tsa polokeho
TLHOKOMELO
- U se ke ua kopanya lihlahisoa le lithapo ka matla a hokahaneng le sistimi. Ho etsa joalo ho baka "arc flash", e ka fellang ka liketsahalo tse kotsi tse sa lebelloang (ho chesa, mollo, lintho tse fofang, khatello ea ho phatloha, ho phatloha ha molumo, mocheso).
- Se ke oa ama li-terminal blocks kapa li-module tsa IO ha sistimi e sebetsa. Ho etsa joalo ho ka baka ts'okelo ea motlakase, potoloho e khuts'oane kapa ho se sebetse hantle ha sesebelisoa.
- Le ka mohla u se ke ua lumella lintho tsa tšepe tse ka ntle ho ama sehlahisoa ha tsamaiso e ntse e sebetsa. Ho etsa joalo ho ka baka ts'okelo ea motlakase, potoloho e khuts'oane kapa ho se sebetse hantle ha sesebelisoa.
- U se ke ua beha sehlahisoa haufi le thepa e tukang. Ho etsa joalo ho ka baka mollo.
- Mosebetsi oohle oa lithapo o lokela ho etsoa ke moenjiniere oa motlakase.
- Ha u sebetsana le li-module, etsa bonnete ba hore batho bohle, sebaka sa mosebetsi le ho paka li thehiloe hantle. Qoba ho ama likarolo tsa conductive, li-module li na le likarolo tsa elektronike tse ka 'nang tsa senngoa ke ho tsoa ha electrostatic.
TLHOKOMELO
- Le ka mohla u se ke ua sebelisa sehlahisoa libakeng tse nang le mocheso o fetang 60 ℃. Qoba ho beha sehlahisoa letsatsing le tobileng.
- Le ka mohla u se ke ua sebelisa sehlahisoa libakeng tse nang le mongobo o fetang 90%.
- Kamehla sebelisa sehlahisoa libakeng tse nang le tekanyo ea 1 kapa 2 ea tšilafalo.
- Sebelisa likhoele tse tloaelehileng bakeng sa likhoele.
Mabapi le Sistimi ea letoto la G
GT-5424 PWM Output Module e etselitsoe ho sebetsa ntle le moroallo le sistimi ea G-series. Netefatsa 'mapa o nepahetseng oa ts'ebetso ea IO bakeng sa ts'ebetso e nepahetseng.
Sistimi e felileview
- Network Adapter Module - Mojule oa adaptara ea marang-rang o etsa sehokelo lipakeng tsa bese ea tšimo le lisebelisoa tsa masimong tse nang le li-module tsa katoloso. Khokahano ho litsamaiso tse fapaneng tsa libese tsa masimong e ka theoa ke mojule o mong le o mong o tsamaellanang oa adaptara ea netweke, mohlala, bakeng sa MODBUS TCP, Ethernet IP, EtherCAT, PROFINET, CC-Link IE Field, PROFIBUS, CANopen, DeviceNet, CC-Link, MODBUS/Serial joalo-joalo.
- Katoloso ea Mojule - Mefuta ea li-module tsa katoloso: Digital IO, Analog IO, le li-module tse khethehileng.
- Melaetsa - Sistimi e sebelisa mefuta e 'meli ea melaetsa: Melaetsa ea litšebeletso le melaetsa ea IO.
Mokhoa oa ho etsa 'mapa oa data
Mojule oa katoloso o na le mefuta e meraro ea data: data ea IO, paramethara ea tlhophiso, le ngoliso ea memori. Phapanyetsano ea data pakeng tsa adaptara ea marang-rang le li-module tsa ho atolosa li etsoa ka data ea setšoantšo sa IO ka protocol ea ka hare.
Phallo ea data lipakeng tsa adaptara ea marang-rang (li-slots tse 63) le li-module tsa katoloso Lintlha tsa setšoantšo sa ho kenya le ho tsoa li ipapisitse le sebaka sa slot le mofuta oa data oa sekotjana sa katoloso. Ho hlophisoa ha data ea setšoantšo sa ho kenya le ho tsoa ho ipapisitse le boemo ba sekotjana sa katoloso. Lipalo tsa tlhophiso ena li kenyelelitsoe libukeng tsa adaptara ea marang-rang le li-module tsa IO tse ka khonehang. Lintlha tse sebetsang tsa parameter li ipapisitse le li-module tse sebelisoang. Bakeng sa mohlalaample, li-module tsa analoge li na le li-setting tsa 0-20 mA kapa 4-20 mA, 'me li-module tsa mocheso li na le li-setting tse kang PT100, PT200, le PT500. Litokomane tsa module ka 'ngoe li fana ka tlhaloso ea data ea parameter.
Litekanyo
Litekanyo tsa module (mm)
Litlhaloso tsa Sephetho
| Palo ea likanale | 4 likanale |
| Palo ea liphetho | Liphetho tse 4, mofuta oa push-pull |
| Lipontšo | Li-LED tsa 4 tse tala tsa pulse |
| Sephetho voltage | Nominal 24 VDC (ho ipapisitse le matla a tšimo) |
| Sephetho sa hajoale | 2.0 A kanale ka 'ngoe, 8.0 A mojule ka 'ngoe @ 25 ℃ Fetola hajoale (sink / mohloli) ho latela mojaro oa kantle Ambient 50 - 60 ℃:
|
| Pulse output frequency | 1-5 kHz ± 0.5% |
| Mosebetsi oa tlhahiso ea pulse | 0.0 – 100.0 % ±1.0 % (0.1 % / 1 LSB), Ton > 1 rona, Toff > 1 rona |
| Tshireletso | Tšireletso e khutšoanyane |
| Mofuta o tloaelehileng | 4 e tloaelehileng (matla a tšimo 0 V a tloaelehile) |
Setšoantšo sa Wiring
HLOKOMELA
Fetola hona joale ka tsela e iketsang (sink / mohloli) ho latela mojaro o kantle.
| Tšoaea no. | Tlhaloso ea lets'oao |
| 0 | Lekanale la tlhahiso ea PWM #0 |
| 1 | Matla a Tšimo 0 V, a tloaelehileng |
| 2 | Lekanale la tlhahiso ea PWM #1 |
| 3 | Matla a Tšimo 0 V, a tloaelehileng |
| 4 | Ha e kopane |
| 5 | Ha e kopane |
| 6 | Ha e kopane |
| 7 | Ha e kopane |
| 8 | Lekanale la tlhahiso ea PWM #2 |
| 9 | Matla a Tšimo 0 V, a tloaelehileng |
| 10 | Lekanale la tlhahiso ea PWM #3 |
| 11 | Matla a Tšimo 0 V, a tloaelehileng |
| 12 | Ha e kopane |
| Tšoaea no. | Tlhaloso ea lets'oao |
| 13 | Ha e kopane |
| 14 | Ha e kopane |
| 15 | Ha e kopane |
| 16 | Thebe |
| 17 | Thebe |
Letšoao la LED
| Nomoro ea LED. | LED mosebetsi / tlhaloso | Mmala oa LED |
| 0 | PMW e hlahisang mocha #0 | Botala |
| 1 | PMW e hlahisang mocha #1 | Botala |
| 2 | PMW e hlahisang mocha #2 | Botala |
| 3 | PMW e hlahisang mocha #3 | Botala |
Boemo ba Channel
| Boemo | LED | E supa |
| Ha ho pontšo | E tima | Ha ho lets'oao la tlhahiso |
| Ka pontsho | Botala | Ts'ebetso e tloaelehileng |
Ho 'mapa Lintlha ka Boleng ba Litšoantšo
Kenya boleng ba setšoantšo
| Nonyana e nyane. | hanyane 7 | hanyane 6 | hanyane 5 | hanyane 4 | hanyane 3 | hanyane 2 | hanyane 1 | hanyane 0 |
| Byte 0 | Reserved | |||||||
| Byte 1 | Reserved | |||||||
| Byte 2 | Reserved | |||||||
| Byte 3 | Reserved | |||||||
Boleng ba setšoantšo se hlahisoang
| Nonyana e nyane. | hanyane 7 | hanyane 6 | hanyane 5 | hanyane 4 | hanyane 3 | hanyane 2 | hanyane 1 | hanyane 0 |
| Byte 0 | Khafetsa CH#0, baiti e tlase | |||||||
| Byte 1 | Khafetsa CH#0, baiti e phahameng | |||||||
| Byte 2 | Mosebetsi CH#0, low byte | |||||||
| Byte 3 | Mosebetsi CH#0, high byte | |||||||
| Byte 4 | Khafetsa CH#1, baiti e tlase | |||||||
| Byte 5 | Khafetsa CH#1, baiti e phahameng | |||||||
| Byte 6 | Mosebetsi CH#1, low byte | |||||||
| Byte 7 | Mosebetsi CH#1, high byte | |||||||
| Byte 0 | Khafetsa CH#2, baiti e tlase | |||||||
| Byte 1 | Khafetsa CH#2, baiti e phahameng | |||||||
| Byte 2 | Mosebetsi CH#2, low byte | |||||||
| Byte 3 | Mosebetsi CH#2, high byte | |||||||
| Byte 4 | Khafetsa CH#3, baiti e tlase | |||||||
| Byte 5 | Khafetsa CH#3, baiti e phahameng | |||||||
| Byte 6 | Mosebetsi CH#3, low byte | |||||||
| Byte 7 | Mosebetsi CH#3, high byte | |||||||
HLOKOMELA
Karolo ea Mosebetsi o mong le o mong ke 0 (0.0 %) - 1000 (100.0%). Ex. Haeba boleng ba mosebetsi ke 365, joale sekhahla sa mosebetsi ke 36.5%.
Lintlha tsa parameter
- Bolelele bo nepahetseng ba parametha: 2 Byte
| Nonyana e nyane. | hanyane 7 | hanyane 6 | hanyane 5 | hanyane 4 | hanyane 3 | hanyane 2 | hanyane 1 | hanyane 0 |
| Byte 0 | Reserved | |||||||
| Byte 1 | Reserved | |||||||
Ho hlophisoa ha Hardware
TLHOKOMELO
Bala khaolo ena kamehla pele o kenya module!
- Sebaka se chesang! Bokaholimo ba ntlo bo ka chesa nakong ea ts'ebetso. Haeba sesebelisoa se sebelisoa mochesong o phahameng oa tikoloho, kamehla tlohela sesebelisoa hore se phomole pele u se tšoara.
- Ho sebetsa ka lisebelisoa tse matlafalitsoeng ho ka senya thepa! Kamehla tima motlakase pele o sebetsa sesebelisoa.
Litlhoko tsa Sebaka
Litšoantšo tse latelang li bontša litlhoko tsa sebaka ha u kenya li-module tsa G-Series. Sekheo se theha sebaka sa moea, 'me se thibela tšitiso ea motlakase ho susumetsa ts'ebetso. Boemo ba ho kenya bo nepahetse bo otlolohile ebile bo rapame. Litšoantšo li na le litšoantšo 'me li ka 'na tsa se ke tsa lekana.
TLHOKOMELO
HO SE latele ditlhoko tsa sebaka ho ka baka ho senya sehlahisoa.
Mount Module ho DIN Rail
Likhaolo tse latelang li hlalosa mokhoa oa ho kenya mojule seporong sa DIN.
TLHOKOMELO
Mojule o tlameha ho ts'oaroa ho seporo sa DIN ka lithapo tsa ho notlela.
Thaba ea GL-9XXX kapa GT-XXXX Module
Litaelo tse latelang li sebetsa mefuteng ena ea li-module:
- GL-9XXX
- GT-1XXX
- GT-2XXX
- GT-3XXX
- GT-4XXX
- GT-5XXX
- GT-7XXX
HLOKOMELA
Li-module tsa GN-9XXX li na le lisebelisoa tse tharo tsa ho notlela, e 'ngoe e le ka tlase le tse peli ka lehlakoreng. Bakeng sa litaelo tsa ho phahamisa, sheba khaolo ea Mount GN-9XXX Mojule ka tlase.
Namela seporong sa DIN
Theoha ho tloha seporong sa DIN
Thaba ea GN-9XXX Module
Ho kenya kapa ho theola adaptara ea netweke kapa mojule oa IO o ka sebelisoang ka lebitso la sehlahisoa GN-9XXX, bakeng sa mohlala.ample GN-9251 kapa GN-9371, bona litaelo tse latelang:
Namela seporong sa DIN
Mount Removable Terminal Block
Ho hloma kapa ho theola "terminal block" (RTB), sheba litaelo tse ka tlase.
Hloma block block e ka ntshuwang
Theola borokho bo ka ntshuwang
Hokela Lithapo ho Thibelo ea Removable Terminal Block
Ho hokela kapa ho hakolla lithapo ho/ho tloha borokhong ba removable terminal (RTB), sheba litaelo tse ka tlase.
TLHOKOMELO
Kamehla sebelisa tlhahiso e khothaletsoang voltage le makhetlo a mangata ho thibela tšenyo ea lisebelisoa le ho netefatsa ts'ebetso e nepahetseng.
Hokela thapo
Hakolla thapo
Copyright © 2023 Beijer Electronics AB. Litokelo tsohle li sirelelitsoe.
Lintlha tse tokomaneng ena li ka fetoha ntle le tsebiso mme li fanoa joalo ka ha li fumaneha ka nako ea khatiso. Beijer Electronics AB e na le tokelo ea ho fetola tlhahisoleseding leha e le efe ntle le ho ntlafatsa khatiso ena. Beijer Electronics AB ha e nke boikarabello bakeng sa liphoso leha e le life tse ka hlahang tokomaneng ena. Tsohle exampLes tokomaneng ena e reretsoe feela ho ntlafatsa kutloisiso ea ts'ebetso le ts'ebetso ea lisebelisoa. Beijer Electronics AB e ke ke ea nka boikarabelo leha e le bofe haeba tsena e le tsa peleamples li sebelisoa lits'ebetsong tsa 'nete. Ho view mabapi le mefuta e mengata ea lits'ebetso tsa software ena, basebelisi ba tlameha ho fumana tsebo e lekaneng ka bobona ho netefatsa hore e sebelisoa ka nepo ts'ebelisong ea bona e ikhethileng. Batho ba ikarabellang bakeng sa kopo le lisebelisoa ba tlameha ho netefatsa hore kopo e 'ngoe le e 'ngoe e tsamaellana le litlhoko tsohle tse amehang, litekanyetso le melao mabapi le tlhophiso le polokeho. Beijer Electronics AB e ke ke ea amohela boikarabello bakeng sa tšenyo leha e le efe e etsahetseng nakong ea ho kenya kapa ho sebelisoa thepa e boletsoeng tokomaneng ena. Beijer Electronics AB e thibela liphetoho tsohle, liphetoho, kapa phetolo ea lisebelisoa.
Ntlo-kholo
Beijer Electronics AB
Lebokose la 426
201 24 Malmö, Sweden
www.beijerelectronics.com / +46 40 358600
LBH
- P: Ke lokela ho etsa eng haeba ke kopana le aekhone ea Temoso ho pukwanana?
A: Letshwao la Temoso le bontsha boemo bo ka bang kotsi. Latela litaelo ka hloko ho qoba likotsi leha e le life. - P: Nka etsa bonnete ba hore ho na le motheo o nepahetseng nakong ea ho kenya?
A: Etsa bonnete ba hore liphutheloana tsohle li thehiloe hantle 'me u qobe ho ama likarolo tsa conductive ho thibela tšenyo e bakoang ke ho tsoa ha electrostatic.
Litokomane / Lisebelisoa
 |
Beijer ELECTRONICS GT-5424 PWM Output Module [pdf] Bukana ea Mosebelisi GT-5424 PWM Output Module, GT-5424, PWM Output Module, Output Module |
 |
Beijer ELECTRONICS GT-5424 PWM Output Module [pdf] Bukana ea Mosebelisi GT-5424, GT-5424 PWM Output Module, PWM Output Module, Output Module, Mojule |
