Litaba
pata
Beijer ELECTRONICS GT-5442 PWM Output Module
Litlhaloso
- Mananeo: 2
- Moqtage: 24 VDC
- Hona joale: 0.5 A
- Mofuta: Mohloli
- Khokahano: Clamp
- Theminale: 18 pt terminal e ka tlosoang
Litaelo tsa Tšebeliso ea Sehlahisoa
Mabapi le Sistimi ea letoto la G
- GT-5442 PWM Output Module e etselitsoe ho sebetsa le sistimi ea G-Series. E lumella 'mapa oa data oa IO bakeng sa ts'ebetso e nepahetseng ea sistimi.
- Mojule o kopana le litlhaloso tsa tikoloho mme o na le litlhaloso tse akaretsang le tse hlahisoang tse netefatsang ts'ebetso e tšepahalang.
Litlhoko tsa Sebaka
- Etsa bonnete ba hore ho na le sebaka se lekaneng ho potoloha mojule bakeng sa ho kenya moea le ho hlokomela.
Ho phahamisa
- Hlomella mojule ka mokhoa o sireletsehileng ho seporo sa DIN u sebelisa lisebelisoa tse loketseng tsa ho kenya.
Ho kopanya Lithapo
- Hokela lithapo ho li-terminal block tse ntshuwang, ho latela litaelo tse fanoeng ho netefatsa likhokahano tse nepahetseng.
LBH
P: Litšoantšetso tse bukeng ea litaelo li bolela'ng?
A: Matshwao a bontsha maemo a fapaneng a bohlokwa mme a fana ka tlhahisoleseding mabapi le mehato ya polokeho le dintlha tsa bohlokwa ka sehlahiswa.
Q: Ke lokela ho sebetsana joang le ho tebelwa ha electrostatic?
A: Qoba ho ama likarolo tsa conductive mme u netefatse hore ho na le motheo o nepahetseng ho thibela tšenyo ea likarolo tsa elektronike.
Mabapi le Bukana ena
Bukana ena e na le tlhahisoleseding e mabapi le software le likarolo tsa hardware tsa Beijer Electronics GT-5442 PWM Output Module. E fana ka litlhaloso tse tebileng, le tataiso mabapi le ho kenya, ho seta, le tšebeliso ea sehlahisoa.
Matshwao a Sebedisitsweng Bukaneng ena
- Sengoliloeng sena se kenyelletsa Temoso, Tlhokomeliso, Tlhokomeliso le matšoao a Bohlokoa moo ho loketseng, ho supa lintlha tse amanang le polokeho, kapa lintlha tse ling tsa bohlokoa.
- Matšoao a tšoanang a lokela ho hlalosoa ka tsela e latelang.
TLHOKOMELO Letšoao la Tlhokomeliso le bontša boemo bo ka bang kotsi boo, ha bo sa qojoe, bo ka bakang lefu kapa kotsi e mpe le tšenyo e kholo sehlahisoa.
TLHOKOMELO Letšoao la Tlhokomeliso le bontša boemo bo ka bang kotsi boo, ha bo sa qojoe, bo ka bakang kotsi e nyane kapa e itekanetseng, le tšenyo e itekanetseng sehlahisoa.
HLOKOMELA Letšoao la Note le hlokomelisa 'mali ka lintlha le maemo a amehang.
BOHLOKOA Letšoao la Bohlokoa le totobatsa lintlha tsa bohlokoa.
Polokeho
- Pele o sebelisa sehlahisoa sena, ka kopo bala bukana ena le libuka tse ling tse amehang ka hloko. Ela hloko ka botlalo litaelo tsa polokeho!
- Na ha ho na ketsahalo na Beijer Electronics e tla ikarabella kapa ho ikarabella bakeng sa tšenyo e bakiloeng ke tšebeliso ea sehlahisoa see?
- Litšoantšo, mohlalaamples, le litšoantšo bukeng ena li kenyelelitsoe molemong oa ho etsa litšoantšo.
- Ka lebaka la mefuta e mengata e fapaneng le litlhoko tse amanang le ts'ebetso efe kapa efe e itseng, Beijer Electronics e ke ke ea nka boikarabello kapa boikarabello bakeng sa ts'ebeliso ea 'nete e ipapisitseng le maemo a khale.amples le litšoantšo.
Setifikeiti sa Sehlahisoa
Sehlahisoa se na le litifikeiti tse latelang tsa sehlahisoa.
Litlhoko tse akaretsang tsa polokeho
TLHOKOMELO
- U se ke ua kopanya lihlahisoa le lithapo ka matla a hokahaneng le sistimi. Ho etsa joalo ho baka "arc flash", e ka fellang ka liketsahalo tse kotsi tse sa lebelloang (ho chesa, mollo, lintho tse fofang, khatello ea ho phatloha, ho phatloha ha molumo, mocheso).
- Se ke oa ama li-terminal blocks kapa li-module tsa IO ha sistimi e sebetsa. Ho etsa joalo ho ka baka ts'okelo ea motlakase, potoloho e khuts'oane, kapa ho se sebetse hantle ha sesebelisoa.
- Le ka mohla u se ke ua lumella lintho tsa tšepe tse ka ntle ho ama sehlahisoa ha tsamaiso e ntse e sebetsa. Ho etsa joalo ho ka baka ts'okelo ea motlakase, potoloho e khuts'oane, kapa ho se sebetse hantle ha sesebelisoa.
- U se ke ua beha sehlahisoa haufi le thepa e tukang. Ho etsa joalo ho ka baka mollo.
- Mosebetsi oohle oa lithapo o lokela ho etsoa ke moenjiniere oa motlakase.
- Ha u sebetsana le li-module, etsa bonnete ba hore batho bohle, sebaka sa mosebetsi le ho paka li thehiloe hantle. Qoba ho ama likarolo tsa conductive, li-module li na le likarolo tsa elektronike tse ka 'nang tsa senngoa ke ho tsoa ha electrostatic.
TLHOKOMELO
- Le ka mohla u se ke ua sebelisa sehlahisoa libakeng tse nang le mocheso o fetang 60℃. Qoba ho beha sehlahisoa letsatsing le tobileng.
- Le ka mohla u se ke ua sebelisa sehlahisoa libakeng tse nang le mongobo o fetang 90%.
- Kamehla sebelisa sehlahisoa libakeng tse nang le tekanyo ea 1 kapa 2 ea tšilafalo.
- Sebelisa likhoele tse tloaelehileng bakeng sa likhoele.
Mabapi le Sistimi ea letoto la G
Tsamaiso e Fetilengview
- Network Adapter Module - Mojule oa adaptara ea marang-rang o theha sehokelo lipakeng tsa bese ea tšimo le lisebelisoa tsa masimong tse nang le li-module tsa katoloso. Khokahano ho litsamaiso tse fapaneng tsa libese tsa masimong e ka theoa ke e 'ngoe le e' ngoe ea li-module tsa adaptara ea marang-rang tse tsamaellanang, mohlala, bakeng sa MODBUS TCP, Ethernet IP, EtherCAT, PROFINET, CC-Link IE Field, PROFIBUS, CANopen, DeviceNet, CC-Link, MODBUS/ Seriali, joalo-joalo.
- Katoloso Mojule - Mefuta ea li-module tsa katoloso: Digital IO, Analog IO, le li-module tse khethehileng.
- Ho romella melaetsa - Sistimi e sebelisa mefuta e 'meli ea melaetsa: Melaetsa ea litšebeletso le melaetsa ea IO.
IO Process Data Mapping
- Mojule oa katoloso o na le mefuta e meraro ea data: data ea IO, paramethara ea tlhophiso, le ngoliso ea memori. Phapanyetsano ea data pakeng tsa adaptara ea marang-rang le li-module tsa ho atolosa li etsoa ka data ea setšoantšo sa IO ka protocol ea ka hare.
Phallo ea data lipakeng tsa adaptara ea marang-rang (li-slots tse 63) le li-module tsa katoloso
- Lintlha tsa setšoantšo le se hlahisoang li itšetlehile ka sebaka sa slot le mofuta oa data oa slot ea ho atolosa.
- Ho hlophisoa ha data ea setšoantšo sa ho kenya le ho tsoa ho ipapisitse le boemo ba sekotjana sa katoloso. Lipalo tsa tlhophiso ena li kenyelelitsoe libukeng tsa li-adapter tsa netweke le li-programmable IO modules.
- Lintlha tse sebetsang tsa parameter li ipapisitse le li-module tse sebelisoang. Bakeng sa mohlalaample, li-module tsa analoge li na le li-setting tsa 0-20 mA kapa 4-20 mA, 'me li-module tsa mocheso li na le li-setting tse kang PT100, PT200, le PT500.
- Litokomane tsa module ka 'ngoe li hlalosa data ea parameter.
Litlhaloso
Litlhaloso tsa Tikoloho
| Mocheso oa ho sebetsa | -20°C – 60°C |
| UL mocheso | -20°C – 60°C |
| Mocheso oa polokelo | -40°C – 85°C |
| Mongobo o amanang | 5% - 90% e sa lumellaneng |
| Ho phahamisa | DIN seporo |
| Ts'ebetso ea ts'oenyeho | IEC 60068-2-27 (15G) |
| Khanyetso ea ho thothomela | IEC 60068-2-6 (4 g) |
| Likhase tsa indasteri | EN 61000-6-4/A11: 2011 |
| Tšireletso ea indasteri | EN 61000-6-2: 2019 |
| Boemo ba ho kenya | E otlolohileng le e tshekaletseng |
| Setifikeiti sa lihlahisoa | CE, FCC, UL, cUL |
Litlhaloso Kakaretso
| Ho felloa ke matla | Max. 75 mA @ 5 VDC |
| Ho behwa ka thoko | I/O ho Logic: Ho itšehla thajana ha Photocoupler
Matla a tšimong: Ho se itšehle thajana |
| UL matla a tšimo | Phepelo voltage: 24 VDC lebitso, Sehlopha sa 2 |
| Matla a tšimo | Phepelo voltage: 24 VDC lebitso la Moqtagmefuta e fapaneng: 15-30 VDC
Ho felloa ke matla: Max. 10 mA @ 24 VDC ntle le mojaro |
| Mohala o le mong | I/O Cable Max. 0.823mm² (AWG18) |
| Boima ba 'mele | 63 g |
| Boholo ba module | 12 mm x 109 mm x 70 mm |
Litekanyo
Litekanyo tsa module (mm)
Litlhaloso tsa Sephetho
| Palo ea likanale | 2 likanale |
| Palo ea liphetho | Liphetho tse 2, mofuta oa push-pull |
| Lipontšo | Li-LED tsa 2 tse tala tsa pulse |
| Sephetho voltage | Nominal 24 VDC (ho ipapisitse le matla a tšimo) |
| Sephetho sa hajoale | 0.5 A mocha ka mong, 1.0 A mojule ka 'ngoe
Fetola hajoale (sink / mohloli) ho latela mojaro o kantle Mocheso o sebetsang: -40 – 45 ℃: Max 0.5 A mocha ka mong 45 – 60 ℃: Max 0.3 A kanale ka nngwe |
| Pulse output frequency | 1-5 kHz ± 0.5% |
| Mosebetsi oa tlhahiso ea pulse | 0.0 – 100.0 % ±1.0 % (0.1 % / 1 LSB), Ton > 1 rona, Toff > 1 rona |
| Tshireletso | Tšireletso e khutšoanyane |
| Mofuta o tloaelehileng | 2 e tloaelehileng (matla a tšimo 0 V a tloaelehile) |
Setšoantšo sa Wiring
HLOKOMELA Fetola hona joale ka tsela e iketsang (sink / mohloli) ho latela mojaro o kantle.
| Tšoaea no. | Tlhaloso ea lets'oao |
| 0 | Lekanale la tlhahiso ea PWM #0 |
| 1 | Matla a Tšimo 0 V, a tloaelehileng |
| 2 | Lekanale la tlhahiso ea PWM #1 |
| 3 | Matla a Tšimo 0 V, a tloaelehileng |
| 4 | Ha e kopane |
| 5 | Ha e kopane |
| 6 | Ha e kopane |
| 7 | Ha e kopane |
| 8 | Ha e kopane |
| 9 | Ha e kopane |
| 10 | Ha e kopane |
| 11 | Ha e kopane |
| 12 | Ha e kopane |
| Tšoaea no. | Tlhaloso ea lets'oao |
| 13 | Ha e kopane |
| 14 | Ha e kopane |
| 15 | Ha e kopane |
| 16 | Thebe |
| 17 | Thebe |
Letšoao la LED
| Nomoro ea LED. | LED mosebetsi/tlhaloso | Mmala oa LED |
| 0 | PMW e hlahisang mocha #0 | Botala |
| 1 | PMW e hlahisang mocha #1 | Botala |
Boemo ba Channel
| Boemo | LED | E supa |
| Ha ho pontšo | E tima | Ha ho lets'oao la tlhahiso |
| Ka pontsho | Botala | Ts'ebetso e tloaelehileng |
Ho 'mapa Lintlha ka Boleng ba Litšoantšo
Kenya boleng ba setšoantšo
| Nonyana e nyane. | hanyane 7 | hanyane 6 | hanyane 5 | hanyane 4 | hanyane 3 | hanyane 2 | hanyane 1 | hanyane 0 |
| Byte 0 | Reserved | |||||||
| Byte 1 | Reserved | |||||||
Boleng ba setšoantšo se hlahisoang
| Nonyana e nyane. | hanyane 7 | hanyane 6 | hanyane 5 | hanyane 4 | hanyane 3 | hanyane 2 | hanyane 1 | hanyane 0 |
| Byte 0 | Khafetsa CH#0, baiti e tlase | |||||||
| Byte 1 | Khafetsa CH#0, baiti e phahameng | |||||||
| Byte 2 | Mosebetsi CH#0, low byte | |||||||
| Byte 3 | Mosebetsi CH#0, high byte | |||||||
| Byte 4 | Khafetsa CH#1, baiti e tlase | |||||||
| Byte 5 | Khafetsa CH#1, baiti e phahameng | |||||||
| Byte 6 | Mosebetsi CH#1, low byte | |||||||
| Byte 7 | Mosebetsi CH#1, high byte | |||||||
HLOKOMELA Karolo ea Mosebetsi o mong le o mong ke 0 (0.0 %) - 1000 (100.0%). Ex. Haeba boleng ba mosebetsi ke 365, joale sekhahla sa mosebetsi ke 36.5%.
Lintlha tsa parameter
Bolelele bo nepahetseng ba parametha: 2 Byte
| Empa che. | hanyane 7 | hanyane 6 | hanyane 5 | hanyane 4 | hanyane 3 | hanyane 2 | hanyane 1 | hanyane 0 |
| Byte 0 | Reserved | |||||||
| Byte 1 | Reserved | |||||||
Ho hlophisoa ha Hardware
- TLHOKOMELO Bala khaolo ena kamehla pele o kenya module!
- TLHOKOMELO Sebaka se chesang! Bokaholimo ba ntlo bo ka chesa nakong ea ts'ebetso. Haeba sesebelisoa se sebelisoa mochesong o phahameng oa tikoloho, kamehla tlohela sesebelisoa hore se phomole pele u se tšoara.
- TLHOKOMELO Ho sebetsa ka lisebelisoa tse matlafalitsoeng ho ka senya thepa! Kamehla tima motlakase pele o sebetsa sesebelisoa.
Litlhoko tsa Sebaka
- Litšoantšo tse latelang li bontša litlhoko tsa sebaka ha u kenya li-module tsa G-Series. Sekheo se theha sebaka sa moea le ho thibela tšitiso e etsoang ke electromagnetic ho susumetsa ts'ebetso.
- Boemo ba ho instola bo nepahetse bo otlolohile ebile bo tšekaletse. Litšoantšo li na le litšoantšo 'me li ka 'na tsa se ke tsa lekana.
- TLHOKOMELO HO SE latele ditlhoko tsa sebaka ho ka baka ho senya sehlahisoa.
Mount Module ho DIN Rail
- Likhaolo tse latelang li hlalosa mokhoa oa ho kenya mojule seporong sa DIN.
- TLHOKOMELO Mojule o tlameha ho ts'oaroa ho seporo sa DIN ka lithapo tsa ho notlela.
Thaba ea GL-9XXX kapa GT-XXXX Module
- Litaelo tse latelang li sebetsa mefuteng ena ea li-module.
- GL-9XXX
- GT-1XXX
- GT-2XXX
- GT-3XXX
- GT-4XXX
- GT-5XXX
- GT-7XXX
- HLOKOMELA Li-module tsa GN-9XXX li na le lisebelisoa tse tharo tsa ho notlela, e 'ngoe e le ka tlase le tse peli ka lehlakoreng. Bakeng sa litaelo tsa ho phahamisa, sheba khaolo ea Mount GN-9XXX Mojule ka tlase.
Thaba ea GN-9XXX Module
- Ho kenya kapa ho theola adaptara ea netweke kapa mojule oa IO o ka sebelisoang ka lebitso la sehlahisoa GN-9XXX, bakeng sa mohlala.ample GN-9251 kapa GN-9371, bona litaelo tse latelang.
Mount Removable Terminal Block
- Ho hloma kapa ho theola "terminal block" (RTB), sheba litaelo tse ka tlase.
Hokela Lithapo ho Thibelo ea Removable Terminal Block
- Ho hokela kapa ho hakolla lithapo ho/ho tloha borokhong ba removable terminal (RTB), sheba litaelo tse ka tlase.
TLHOKOMELO
- Kamehla sebelisa tlhahiso e khothaletsoang voltage le makhetlo a mangata ho thibela tšenyo ea lisebelisoa le ho netefatsa ts'ebetso e nepahetseng.
Copyright © 2023 Beijer Electronics AB. Litokelo tsohle li sirelelitsoe
- Lintlha tse tokomaneng ena li ka fetoha ntle le tsebiso mme li fanoa joalo ka ha li fumaneha ka nako ea khatiso. Beijer Electronics AB e na le tokelo ea ho fetola tlhahisoleseding leha e le efe ntle le ho ntlafatsa khatiso ena.
- Beijer Electronics AB ha e nke boikarabello bakeng sa liphoso leha e le life tse ka hlahang tokomaneng ena. Tsohle examples tokomaneng ena ke feela
- e reretsoeng ho ntlafatsa kutloisiso ea ts'ebetso le ts'ebetso ea lisebelisoa. Beijer Electronics AB e ke ke ea nka boikarabelo leha e le bofe haeba tsena e le tsa peleamples li sebelisoa lits'ebetsong tsa 'nete.
- Ka lebaka la mefuta e mengata ea lits'ebetso tsa software ena, basebelisi ba tlameha ho fumana tsebo e lekaneng ho netefatsa hore e sebelisoa ka nepo ts'ebelisong ea bona e ikhethileng.
- Batho ba ikarabellang bakeng sa kopo le lisebelisoa ba tlameha ho netefatsa hore kopo e 'ngoe le e 'ngoe e lumellana le litlhoko tsohle tse amehang, litekanyetso le melao bakeng sa tlhophiso le polokeho.
- Beijer Electronics AB e ke ke ea amohela boikarabello bakeng sa tšenyo leha e le efe e etsahetseng nakong ea ho kenya kapa ho sebelisoa thepa e boletsoeng tokomaneng ena. Beijer Electronics AB e thibela liphetoho tsohle, liphetoho, kapa phetolo ea lisebelisoa.
- Ntlo-kholo
- Beijer Electronics AB
- Lebokose la 426
- 201 24 Malmö, Sweden
- www.beijerelectronics.com / +46 40 358600
- Beijer Electronics, Doc ID: 131631
Litokomane / Lisebelisoa
 |
Beijer ELECTRONICS GT-5442 PWM Output Module [pdf] Bukana ea Mosebelisi GT-5442 PWM Output Module, GT-5442, PWM Output Module, Output Module, Mojule |
 |
Beijer ELECTRONICS GT-5442 PWM Output Module [pdf] Bukana ea Mosebelisi GT-5442, GT-5442 PWM Output Module, PWM Output Module, Output Module, Mojule |
