Akwụkwọ ntuziaka onye ọrụ Beijer ELECTRONICS GT-5424 PWM

Ọnọdụ okpomọkụ na-arụ ọrụ	-20°C – 60°C
UL okpomọkụ	-20°C – 60°C
Ọnọdụ nchekwa	-40°C – 85°C
Iru mmiri dị ala	5% - 90% na-abụghị condensing
Ịkwanye	DIN ụgbọ okporo ígwè
Shock arụ ọrụ	IEC 60068-2-27 (15G)
Nguzogide ịma jijiji	IEC 60068-2-6 (4 g)
Mgbapụta ụlọ ọrụ	EN 61000-6-4/A11: 2011
Mgbochi ụlọ ọrụ	EN 61000-6-2: 2019
Ọnọdụ nwụnye	Vetikal na kehoraizin
Asambodo ngwaahịa	CE, FCC, UL, cUL

Nkọwapụta izugbe

Mgbasa ike	Oke. 80 mA @ 5 VDC
Nnọpụ iche	I/O na mgbagha: ikewapụ fotocoupler Ike ubi: Enweghị ikewapụ
UL ubi ike	Tụkwasịnụ voltage: 24 VDC ọnụ ọgụgụ, Klas 2
Ike ubi	Tụkwasịnụ voltage: 24 VDC ọnụ ọgụgụ Voltage nso: 15-30 VDC Power dissipation: Max. 15 mA @ 24 VDC except load
Otu waya	I/O USB Max. 0.823mm² (AWG18)
Ibu	63 g
Nha modul	12 mm x 109 mm x 70 mm

Ntuziaka ojiji ngwaahịa

Nwụnye na Nhazi

Ịkwanye: Securely mount the module to a DIN rail following the provided guidelines.
Mgbochi ọnụ: Mount and connect cables to the removable terminal block as per instructions.

Banyere akwụkwọ ntuziaka a
This manual contains information on the software and hardware features of the Beijer Electronics GT-5424 PWM Output Module. It provides in-depth specifications, guidance on installation, setup, and usage of the product.

Akara ndị ejiri n'akwụkwọ ntuziaka a
Edemede a gụnyere ịdọ aka ná ntị, ịkpachara anya, ndetu na akara ngosi ndị dị mkpa ebe kwesịrị ekwesị, iji rụtụ aka nchekwa, ma ọ bụ ozi ndị ọzọ dị mkpa.

Ekwesịrị ịkọwapụta akara ndị kwekọrọ ka ndị a:

Ịdọ aka ná ntị
Akara ngosi ịdọ aka ná ntị na-egosi ọnọdụ nwere ike ịdị ize ndụ nke, ọ bụrụ na ewepụghị ya, nwere ike bute ọnwụ ma ọ bụ mmerụ ahụ dị ukwuu, yana nnukwu mmebi ngwaahịa ahụ.

kpachara anya
Akara ịkpachara anya na-egosi ọnọdụ nwere ike ịdị ize ndụ nke, ma ọ bụrụ na ewepụghị ya, nwere ike bute mmerụ ahụ dị obere ma ọ bụ agafeghị oke yana mmebi nke ngwaahịa ahụ.

IHE
Akara ndetu na-eme ka onye na-agụ mara eziokwu na ọnọdụ dị mkpa.

IHE dị mkpa
Akara ngosi dị mkpa na-eme ka ozi dị mkpa pụta ìhè.

Nchekwa

Tupu iji ngwaahịa a, biko jiri nlezianya gụọ akwụkwọ ntuziaka a na akwụkwọ ntuziaka ndị ọzọ dị mkpa. Lezienụ anya na ntuziaka nchekwa!
In no event will Beijer Electronics be responsible or liable for damages resulting from the use of this product. The images, examples na eserese dị n'akwụkwọ ntuziaka a ka etinyere maka ebumnuche atụ. N'ihi ọtụtụ mgbanwe na ihe achọrọ metụtara nrụnye ọ bụla, Beijer Electronics enweghị ike ibu ọrụ ma ọ bụ ụgwọ maka iji ya eme ihe dabere na mbụ.amples na eserese.

Asambodo ngwaahịa
Ngwaahịa ahụ nwere asambodo ngwaahịa ndị a.

General Safety chọrọ

Ịdọ aka ná ntị

Achịkọtala ngwaahịa na wires na ike ejikọrọ na sistemụ. Ime nke a na-ebute "ọkụ ọkụ", nke nwere ike ịkpata ihe omume dị ize ndụ na-atụghị anya ya (ọkụ, ọkụ, ihe na-efe efe, nrụgide mgbawa, ụda ụda, okpomọkụ).
Emetụkwala ngọngọ ọnụ ma ọ bụ modul IO mgbe sistemụ na-arụ ọrụ. Ime nke a nwere ike ibute ujo ọkụ eletrik, sekit dị mkpụmkpụ ma ọ bụ arụghị ọrụ nke ngwaọrụ ahụ.

Ekwela ka ihe ọla dị na mpụga metụ ngwaahịa ahụ aka mgbe sistemụ na-agba ọsọ. Ime nke a nwere ike ibute ujo ọkụ eletrik, sekit dị mkpụmkpụ ma ọ bụ arụghị ọrụ nke ngwaọrụ ahụ.
Edokwala ngwaahịa a n'akụkụ ihe na-ere ọkụ. Ime otú ahụ nwere ike ịkpata ọkụ.

Ọrụ wiwi niile kwesịrị ịbụ onye injinia eletrik ga-arụ.
Mgbe ị na-ejikwa modul, hụ na mmadụ niile, ebe ọrụ na nkwakọ ngwaahịa nwere ntọala nke ọma. Zere imetụ ihe ndị na-eduzi emetụ aka, modul nwere ihe eletrọnịkị nke enwere ike ibibi site na mwepu electrostatic.

kpachara anya

Ejila ngwaahịa a na gburugburu ebe okpomọkụ karịrị 60 ℃. Zere itinye ngwaahịa ahụ na ìhè anyanwụ.

Ejila ngwaahịa a na gburugburu nwere iru mmiri karịrị 90%.
Jiri ngwaahịa a mgbe niile na gburugburu nwere ogo mmetọ 1 ma ọ bụ 2.
Jiri eriri ọkọlọtọ maka waya.

Banyere Sistemụ usoro G

The GT-5424 PWM Output Module is designed to work seamlessly with the G-series system. Ensure proper IO process data mapping for efficient operation.

Sistemu agwụlaview

Ihe nkwụnye ihe ntanetị - Modul ihe nkwụnye netwọk na-emepụta njikọ dị n'etiti ụgbọ ala ubi na ngwaọrụ ubi nwere modul mgbasawanye. Njikọ na usoro ụgbọ ala ubi dị iche iche nwere ike ịmepụta site na nke ọ bụla n'ime modul nkwụnye netwọk kwekọrọ, dịka, maka MODBUS TCP, Ethernet IP, EtherCAT, PROFINET, CC-Link IE Field, PROFIBUS, CANopen, DeviceNet, CC-Link, MODBUS/Serial etc.
Module Mgbasawanye - Ụdị modul mgbasawanye: Digital IO, Analog IO, na modul pụrụ iche.
Izi ozi – Usoro na-eji ụdị ozi abụọ: ozi ọrụ na ozi IO.

Hazie nkewa data
Modul mgbasawanye nwere ụdị data atọ: data IO, nhazi nhazi, na ndekọ ebe nchekwa. A na-eme mgbanwe data n'etiti ihe nkwụnye netwọkụ na modul mgbasawanye site na IO nhazi data oyiyi site na n'ime protocol.

Ntugharị data n'etiti nkwụnye netwọkụ (oghere 63) na modul mgbasawanye Ntinye na ihe onyonyo onyonyo na-adabere na ọnọdụ oghere na ụdị data nke oghere mgbasawanye. Ịtụ ntinye na mmepụta data nhazi ihe oyiyi dabere na ọnọdụ oghere mgbasawanye. Agụnyere ngụkọ maka nhazi a n'akwụkwọ ntuziaka maka nkwụnye netwọkụ na modul IO mmemme. Data paramita bara uru dabere na modul ndị a na-eji. Maka example, modul analog nwere ntọala nke 0-20 mA ma ọ bụ 4-20 mA, na modul okpomọkụ nwere ntọala dịka PT100, PT200, na PT500. Akwụkwọ maka modul ọ bụla na-enye nkọwa nke data paramita.

Akụkụ

Akụkụ modul (mm)

Nkọwapụta mmepụta

Ọnụọgụ nke ọwa	Ọwa 4
Ọnụọgụ nke mmepụta	Mpụta 4, ụdị ntinye ihe
Ihe ngosi	4 green pulse mmepụta LEDs
Mmepụta voltage	Ọnụ 24 VDC (dabere na ike ubi)
Mpụta ugbu a	2.0 A per channel, 8.0 A per module @ 25 ℃ Automatically switch current (sink/source) according to external load Ambient 50 – 60 ℃: 2CH 2.0 A duty 100 % possible (one channel skip, example: CH0/CH2 or CH1/CH3) 4CH 1.0 A duty 100 % possible 4CH 2.0 A duty 50 % possible
Ugboro mmepụta Pulse	1-5 kHz ± 0.5 %
Ọrụ mmepụta Pulse	0.0 - 100.0% ± 1.0% (0.1% / 1 LSB), Ton> 1 anyị, Toff> 1 anyị
Nchedo	Nchekwa dị mkpirikpi
Ụdị nkịtị	4 nkịtị (ike ubi 0 V bụ nkịtị)

Eserese waya

IHE
Gbanwee ugbu a na-akpaghị aka (sink/isi iyi) dịka ibu mpụga siri dị.

Ntụtụ ọ dịghị.	Nkọwa mgbaàmà
0	Ọwa mmepụta PWM #0
1	Ike Ubi 0 V, nkịtị
2	Ọwa mmepụta PWM #1
3	Ike Ubi 0 V, nkịtị
4	Ejikọtaghị ya
5	Ejikọtaghị ya
6	Ejikọtaghị ya
7	Ejikọtaghị ya
8	Ọwa mmepụta PWM #2
9	Ike Ubi 0 V, nkịtị
10	Ọwa mmepụta PWM #3
11	Ike Ubi 0 V, nkịtị
12	Ejikọtaghị ya

Ntụtụ ọ dịghị.	Nkọwa mgbaàmà
13	Ejikọtaghị ya
14	Ejikọtaghị ya
15	Ejikọtaghị ya
16	Ọta
17	Ọta

Ihe ngosi LED

LED mba.	LED ọrụ / nkọwa	Agba agba
0	Ọwa mmepụta PMW #0	Akwụkwọ ndụ akwụkwọ ndụ
1	Ọwa mmepụta PMW #1	Akwụkwọ ndụ akwụkwọ ndụ
2	Ọwa mmepụta PMW #2	Akwụkwọ ndụ akwụkwọ ndụ
3	Ọwa mmepụta PMW #3	Akwụkwọ ndụ akwụkwọ ndụ

Ọnọdụ ọwa

Ọnọdụ	Ikanam	Na-egosi
Enweghị mgbama	Gbanyụọ	Enweghị mgbama mmepụta
Na mgbama	Akwụkwọ ndụ akwụkwọ ndụ	Arụ ọrụ nkịtị

Nkewa data n'ime uru onyonyo

Tinye uru onyonyo

Bit mba.	Bit 7	Bit 6	Bit 5	Bit 4	Bit 3	Bit 2	Bit 1	Bit 0
Byte 0	Echekwara
Byte 1	Echekwara
Byte 2	Echekwara
Byte 3	Echekwara

Ọnụ ego onyonyo wepụta

Bit mba.	Bit 7	Bit 6	Bit 5	Bit 4	Bit 3	Bit 2	Bit 1	Bit 0
Byte 0	Ugboro CH#0, obere byte
Byte 1	Ugboro CH#0, nnukwu byte
Byte 2	Ọrụ CH #0, obere byte
Byte 3	Ọrụ CH #0, nnukwu byte
Byte 4	Ugboro CH#1, obere byte
Byte 5	Ugboro CH#1, nnukwu byte
Byte 6	Ọrụ CH #1, obere byte
Byte 7	Ọrụ CH #1, nnukwu byte
Byte 0	Ugboro CH#2, obere byte
Byte 1	Ugboro CH#2, nnukwu byte
Byte 2	Ọrụ CH #2, obere byte
Byte 3	Ọrụ CH #2, nnukwu byte
Byte 4	Ugboro CH#3, obere byte
Byte 5	Ugboro CH#3, nnukwu byte
Byte 6	Ọrụ CH #3, obere byte
Byte 7	Ọrụ CH #3, nnukwu byte

IHE
Range of each Duty is 0 (0.0 %) – 1000 (100.0%). Ex. If Duty value is 365, then duty rate is 36.5 %.

Data Parameter

Ogologo oke oke: 2 Bytes

Bit mba.	Bit 7	Bit 6	Bit 5	Bit 4	Bit 3	Bit 2	Bit 1	Bit 0
Byte 0	Echekwara
Byte 1	Echekwara

Ntọala ngwaike

kpachara anya
Na-agụ isiakwụkwọ a mgbe niile tupu ịwụnye modul!

Elu dị ọkụ! Elu ụlọ ahụ nwere ike ịdị ọkụ n'oge ọrụ. Ọ bụrụ na a na-eji ngwaọrụ ahụ na okpomọkụ dị elu, hapụ ka ngwaọrụ ahụ daa jụụ tupu ya emetụ ya aka.
Ịrụ ọrụ na ngwaọrụ ike nwere ike imebi akụrụngwa! Gbanyụọ ọkụ mgbe niile tupu ịrụ ọrụ na ngwaọrụ.

Achọrọ oghere
Eserese ndị a na-egosi oghere chọrọ mgbe ị na-etinye modul G-usoro. Oghere ahụ na-emepụta ohere maka ikuku ventilashị, ma na-egbochi nnyonye anya electromagnetic na-eme ka ọ ghara imetụta ọrụ ahụ. Ọkwa nwụnye bụ vetikal na kehoraizin dị irè. Eserese ndị a bụ ihe atụ ma nwee ike ghara oke.

kpachara anya
Ịgbasoghị oghere chọrọ nwere ike bute mmebi ngwaahịa.

Ugwu Module gaa na DIN Rail
Isiakwụkwọ ndị na-esonụ na-akọwa otu esi ebugo modul na okporo ígwè DIN.

kpachara anya
A ghaghị idozi modul ahụ na okporo ígwè DIN na ihe mkpuchi mkpọchi.

Ugwu GL-9XXX ma ọ bụ GT-XXXX Module

Ntuziaka ndị a metụtara ụdị modul ndị a:

GL-9XXX
GT-1XXX
GT-2XXX

GT-3XXX
GT-4XXX
GT-5XXX

GT-7XXX

IHE
Modul GN-9XXX nwere oghere mkpọchi atọ, otu na ala na abụọ n'akụkụ. Maka ntuziaka mgbago, hụ Modul Ugwu GN-9XXX nke dị n'okpuru.

Gaa n'ọdụ ụgbọ okporo ígwè DIN

Budata site na ụgbọ okporo ígwè DIN

Ugwu GN-9XXX Module
Iji bulie ma ọ bụ tụtuo ihe nkwụnye netwọkụ ma ọ bụ modul IO nwere ike ime ya nwere aha ngwaahịa GN-9XXX, maka ex.ampGN-9251 ma ọ bụ GN-9371, lee ntuziaka ndị a:

Gaa n'ọdụ ụgbọ okporo ígwè DIN

Ngwongwo ọdụ ụgbọ elu nke mbughari
Iji rịgoro ma ọ bụ tụtuo ngọngọ ọdụ mbughari (RTB), lee ntuziaka n'okpuru.

Wụnye ngọngọ ọnụ nke mbughari

Wetuo ngọngọ ọdụ nke mbughari

Jikọọ eriri na ngọngọ njedebe mbughari
Iji jikọọ ma ọ bụ wepụ eriri na / site na ngọngọ nkwụsị mbughari (RTB), lee ntuziaka n'okpuru.

Ịdọ aka ná ntị
Jiri ọkọnọ akwadoro mgbe niiletage na ugboro ugboro iji gbochie mmebi nke akụrụngwa ma hụ na arụmọrụ kacha mma.

Jikọọ eriri

Kwupu eriri USB
Nwebiisinka © 2023 Beijer Electronics AB. Ikike niile echekwabara.
Ozi dị na akwụkwọ a nwere ike ịgbanwe n'enweghị ọkwa ma nye ya dị ka ọ dị n'oge mbipụta. Beijer Electronics AB nwere ikike ịgbanwe ozi ọ bụla na-emeliteghị akwụkwọ a. Beijer Electronics AB anaghị ewere ọrụ maka mperi ọ bụla nwere ike ịpụta na akwụkwọ a. All examples na akwụkwọ a bụ naanị iji kwalite nghọta nke ọrụ na njikwa akụrụngwa. Beijer Electronics AB enweghị ike iburu ụgwọ ọ bụla ma ọ bụrụ na ndị a bụbuampA na-eji les eme ihe n'ezie ngwa. N'ime view nke ngwa dị iche iche maka ngwa ngwanrọ a, ndị ọrụ ga-enwerịrị ihe ọmụma zuru oke n'onwe ha iji hụ na ejiri ya nke ọma na ngwa ha akọwapụtara. Ndị na-ahụ maka ngwa na akụrụngwa ga-ahụrịrị na ngwa ọ bụla dabara na ihe niile achọrọ, ụkpụrụ na iwu gbasara nhazi na nchekwa. Beijer Electronics AB agaghị anabata ụgwọ ọ bụla maka mmebi ọ bụla mebiri n'oge nrụnye ma ọ bụ iji akụrụngwa a kpọtụrụ aha n'akwụkwọ a. Beijer Electronics AB amachibidoro mgbanwe, mgbanwe ma ọ bụ ntughari nke akụrụngwa niile.

Isi ụlọ ọrụ
Ụlọ ọrụ Beijer Electronics AB (publ)
Igbe 426
201 24 Malmö, Sweden
www.beijerelectronics.com / +46 40 358600

FAQ

Q: What should I do if I encounter a Warning icon in the ntuziaka?
A: The Warning icon indicates a potentially hazardous situation. Follow the instructions carefully to avoid any risks.
Ajụjụ: Kedu ka m ga-esi hụ na ntọala kwesịrị ekwesị n'oge echichi?
A: Make sure all packing is well grounded and avoid touching conductive components to prevent damage due to electrostatic discharge.

Akwụkwọ / akụrụngwa

	Beijer ELECTRONICS GT-5424 PWM mmepụta Module [pdf] Akwụkwọ ntuziaka onye ọrụ GT-5424 PWM Output Module, GT-5424, PWM Output Module, Output Module
	Beijer ELECTRONICS GT-5424 PWM mmepụta Module [pdf] Akwụkwọ ntuziaka onye ọrụ GT-5424, GT-5424 PWM mmepụta Module, PWM mmepụta Module, Module mmepụta, Modul