Viewsonic TD2220-2 LCD Ratidza

ZVINOKOSHA: Ndokumbirawo kuti muverenge bhuku reMushandisi kuti uwane ruzivo rwakakosha pakuisa nekushandisa chigadzirwa chako nenzira yakachengeteka, pamwe nekunyoresa chigadzirwa chako kuitira sevhisi yeramangwana. Ruzivo rwewaranti irimo mune ino Yekushandisa Gwaro rinotsanangura yako yakaganhurirwa kufukidza kubva ViewSonic Corporation, iyo inowanikwawo pane yedu web saiti pa http://www.viewsonic.com muChirungu, kana mumitauro chaiyo uchishandisa Regional Sarudzo bhokisi mukona yepamusoro yekurudyi yedu websaiti. "Antes de operar su equipo lea cu idadosamente las instrucciones en este manual"

• Muenzaniso Nha. VS14833
• P/N: TD2220-2

Ruzivo rwekuteerera

CHERECHEDZA: Ichi chikamu chinogadzirisa zvese zvakabatana zvinodiwa uye zvirevo maererano nemitemo. Yakasimbiswa inowirirana kunyorera ichareva kune nameplate mavara uye akakodzera mamaki pane unit.

FCC Kutevedzera Chirevo

Ichi chishandiso chinoenderana nechikamu 15 cheFCC Mitemo. Kushanda kunoenderana nemamiriro maviri anotevera: (1) mudziyo uyu haugone kukonzera kukanganisa kunokuvadza, uye (2) mudziyo uyu unofanirwa kugamuchira chero kukanganisa kunowanikwa, kusanganisira kukanganisa kunogona kukonzera kushanda kusingade.

Midziyo iyi yakaedzwa uye yakawanikwa inoenderana nemiganhu yeKirasi B yedhijitari mudziyo, zvichienderana nechikamu 15 cheFCC Mitemo. Iyi miganho yakagadzirirwa kupa dziviriro inonzwisisika kubva mukukanganisa kunokuvadza mukuiswa kwekugara. Midziyo iyi inogadzira, inoshandisa, uye inogona kuvheneka redhiyo frequency simba, uye ikasaiswa uye ikashandiswa zvinoenderana nemirairo, inogona kukonzeresa kukanganisa kufambiswa kweredhiyo. Nekudaro, hapana vimbiso yekuti kukanganisa hakuzoitika mune imwe yekumisikidza. Kana chishandiso ichi chikakonzera kukanganisa kunokanganisa redhiyo kana terevhizheni, iyo inogona kutariswa nekudzima mudziyo nekubatidza, mushandisi anokurudzirwa kuyedza kugadzirisa kukanganiswa neimwe kana anopfuura eanotevera matanho:

• Reorrent kana kutamisa antenna inogamuchira.
• Wedzera kupatsanurwa pakati pemidziyo nemugamuchiri.
• Batanidza midziyo mune yekubuda padunhu rakasiyana neiyo iyo inotambirwa yakabatana.
• Bvunza mutengesi kana nyanzvi yeredhiyo/TV ine ruzivo kuti ubatsirwe.

Yambiro: Unonyeverwa kuti shanduko kana gadziridzo dzisina kubvumidzwa nebato rine chekuita nekutevedzwa dzinogona kukanganisa simba rako rekushandisa michina.

Industry Canada Chirevo

ANOGONA ICES-3 (B)/NMB-3(B)

CE Conformity kune Nyika dzeEurope

Chishandiso ichi chinoenderana neEMC Directive 2014/30/EU uye Low Voltage Directive 2014/35/EU.

Kutevera ruzivo ndekweEU-nhengo dzenyika:

Chiratidzo chakaratidzwa kurudyi chiri kutevedzera Waste Electrical and Electronic Equipment Directive 2012/19 / EU (WEEE) .Chiratidzo ichi chinoratidza chinodiwa KUSA kurasa midziyo semarara emumaguta asina kurongwa, asi shandisa nzira dzekudzorera nekuunganidza maererano mutemo wemuno.

Kuzivisa kweRoHS2 Kutevedza

Ichi chigadzirwa chakagadzirwa uye chakagadzirwa zvinoenderana neDirective 2011/65/EU yeEuropean Paramende uye Kanzuru inorambidza kushandiswa kwezvimwe zvinhu zvine njodzi mumagetsi nemagetsi midziyo (RoHS2 Directive) uye inofungidzirwa kuti inoenderana nekunyanya kusungwa. tsika dzakapihwa neEuropean technical Adaptation Committee (TAC) sezvakaratidzwa pazasi:

Substance	Proposed Maximum Concentration	Chaiyo Concentration
Tungamira (Pb)	0.1%	<0.1%
Mercury (Hg)	0.1%	<0.1%
Cadmium (Cd)	0.01%	<0.01%
Hexavalent Chromium (Cr6+)	0.1%	<0.1%
Polybrominated biphenyls (PBB)	0.1%	<0.1%
Polybrominated diphenyl ethers (PBDE)	0.1%	<0.1%

Zvimwe zvikamu zvezvigadzirwa sezvataurwa pamusoro zvinoregererwa pasi peAnnex III yeRoHS2 Madhiraivha sezvakanyorwa pazasi:

Exampzvishoma zvezvakaregererwa zvikamu ndezvi:

1. Mercury mune inotonhora cathode fluorescent lamps uye ekunze electrode fluorescent lamps (CCFL neEEFL) yezvinangwa zvakakosha zvisingapfuure (pa lamp):
   1. Urefu hupfupi (≦500 mm): yakawanda 3.5 mg palamp.
   2. Hurefu hwepakati (＞500 mm uye ≦1,500 mm): yakawanda 5 mg paritaamp.
   3. Hurefu hurefu (＞1,500 mm): huwandu hwe13 mg palamp.
2. Tungamira mugirazi ye cathode ray chubhu.
3. Tungamira mugirazi refluorescent chubhu isingadariki 0.2% nehuremu.
4. Tungamira sechinhu chinosanganisa mualuminium ine inosvika 0.4% lead nehuremu.
5. Copper alloy ine inosvika 4% lead nehuremu.
6. Mutobvu mumhando yematembiricha yakanyungudika yakakwira (kureva maaloyi emutobvu ane 85% nehuremu kana mutobvu unopfuura).
7. Magetsi nemagetsi ane mutobvu mugirazi kana cheramic kunze kwedielectric ceramic in capacitor, eg piezoelectronic devices, kana mugirazi kana Ceramic matrix compound.

Yambiro uye Nyevero

1. Verenga mirayiridzo iyi zvakakwana usati washandisa midziyo.
2. Chengeta mirairo iyi munzvimbo yakachengetedzeka.
3. Teerera yese yambiro uye tevera mirairo yese.
4. Gara zvirinani 18 "/ 45cm kubva kuLCD kuratidza.
5. Nguva dzose bata LCD kuratidza nekungwarira kana uchiifambisa.
6. Usambofa wakabvisa chivharo chekumashure. Iyi LCD inoratidza ine high-voltage zvikamu. Unogona kukuvara zvakanyanya kana ukaabata.
7. Usashandise midziyo iyi pedyo nemvura. Yambiro: Kuti uderedze njodzi yemoto kana yemagetsi, usaisa mudziyo uyu kunaya kana hunyoro.
8. Dzivisa kufumura iyo LCD kuratidza kune yakananga zuva kana imwe kupisa sosi. Kumabvazuva iyo LCD inoratidzira kure nezuva chairo kudzikisa kupenya.
9. Geza nemucheka wakapfava, wakaoma. Kana kumwe kucheneswa kuchidikanwa, ona "Kuchenesa Chiratidziro" mugwaro rino kuti uwane mamwe mirairo.
10. Dzivisa kubata skrini. Mafuta eganda akaoma kubvisa.
11. Usazora kana kuisa kumanikidza kune iyo LCD pani, sezvo inogona kukuvadza zvachose iyo skrini.
12. Usavhare chero mazaru emhepo. Isa midziyo maererano nemirairo yemugadziri.
13. Usaise padhuze nechero zvitubu zvekupisa zvakaita semaradiyeta, marejita ekupisa, zvitofu, kana zvimwe zvishandiso (kusanganisira amplifiers) zvinoburitsa kupisa.
14. Isa iyo LCD inoratidzira munzvimbo ine mhepo yakanaka. Usaise chero chinhu pane iyo LCD inoratidzira iyo inodzivirira kupisa kupera.
15. Usaise zvinhu zvinorema pane iyo LCD inoratidzira, vhidhiyo tambo, kana tambo yemagetsi.
16. Kana hutsi, ruzha rwusina kujairika, kana hwema husingazivikanwe uripo, chiriporiporipo bvisa iyo LCD iratidze uye fonera mutengesi wako kana ViewSonic. Zvine ngozi kuramba uchishandisa LCD kuratidza.
17. Usayedze kutenderedza zviga zvekuchengetedza zvepolarized kana grounding-type plug. Polarized plug ine mablades maviri ane yakakura kupfuura imwe. Ipuragi yemhando yepasi ine mablades maviri uye yechitatu yekugadzika prong. Iyo yakafara blade uye yechitatu prong inopihwa kuchengetedza kwako. Kana plug isingakwane mudura rako, bvunza nyanzvi yemagetsi kuti utsive panobuda.
18. Chengetedza tambo yemagetsi kubva pakutsikwa kana kutsinwa, kunyanya papuragi, nenzvimbo apo kana ichibuda mumudziyo. Iva nechokwadi chekuti magetsi anowanikwa pedyo nemidziyo kuitira kuti isvike nyore nyore.
19. Shandisa zvinonamirwa/zvishandiso zvinotsanangurwa nemugadziri chete.
20. Shandisa chete nengoro, kumira, katatu, bracket, kana tafura inotsanangurwa nemugadziri, kana kutengeswa nemidziyo. Kana ngoro yashandiswa, chenjera paunenge uchifambisa ngoro / michina musanganiswa kuti udzivise kukuvara kubva pakumbundikira.
21. Bvisa mudziyo uyu kana uchinge usingashandiswe kwenguva yakareba.
22. Tumira masevhisi ese kuvashandi vanokwanisa. Sevhisi inodiwa kana iyo unit yakuvadzwa neimwe nzira, senge: kana tambo yekupa simba kana plug yakakuvadzwa, kana mvura ikadirwa pairi kana zvinhu zvichiwira muyuniti, kana iyo unit ikasangana nemvura kana hunyoro, kana. kana iyo unit isingashande zvakajairika kana kuti yakadonhedzwa.
23. Hunyoro hunogona kuoneka pachiratidziro nekuda kwekuchinja kwezvakatipoteredza. Nekudaro, ichanyangarika mushure memaminitsi mashoma.

Copyright Information

• Copyright © ViewSonic® Corporation, 2019. Kodzero dzose dzakachengetedzwa.
• Macintosh uye Power Macintosh zviratidzo zvekutengeserana zvakanyoreswa zveApple Inc. Microsoft, Windows, uye logo yeWindows zviratidzo zveMicrosoft Corporation zvakanyoreswa muUnited States nedzimwe nyika.
• ViewSonic, iyo shiri nhatu logo, OnView, ViewMatch, uye ViewMamita maregisheni akanyoreswa e ViewIyo kambani Sonic Corporation.
• VESA chiratidzo chakanyoreswa cheVhidhiyo Electronics Standards Association. DPMS, DisplayPort, uye DDC zviratidzo zveVESA.
• ENERGY STAR® chiratidzo chakanyoreswa cheUS Environmental Protection Agency (EPA).
• Se ENERGY STAR® shamwari, ViewSonic Corporation yakaona kuti chigadzirwa ichi chinosangana ne ENERGY STAR® nhungamiro yekushandisa simba.
• Disclaimer: ViewSonic Corporation haizovi nemhosva yekukanganisa kana yekugadzirisa zvikanganiso kana kusiiwa kuri pano; kana kukuvara kunoitika kana kunotevera zvichikonzerwa nekupa zvinhu izvi, kana mashandiro kana kushandiswa kwechigadzirwa ichi.
• Muchido chekuenderera mberi nekuvandudzwa kwechigadzirwa, ViewSonic Corporation inochengetera kodzero yekuchinja zvigadzirwa zvigadzirwa pasina ziviso. Ruzivo mune ino gwaro runogona kuchinja pasina ziviso.
• Hapana chikamu chegwaro iri chinogona kukopwa, kutsikiswa, kana kufambiswa neimwe nzira, nechinangwa chipi zvacho pasina mvumo yakanyorwa kubva ViewIyo kambani Sonic Corporation.

Product Registration

• Kuti uzadzise zvingangodiwa zvechigadzirwa mune ramangwana, uye kuti ugamuchire rumwe ruzivo rwechigadzirwa pachiri kuwanikwa, ndapota shanyira chikamu chedunhu rako ViewSonic's websaiti yekunyoresa chigadzirwa chako online.
• Kunyoresa chigadzirwa chako kunokugadzirira zvakanyanya kune ramangwana rebasa revatengi zvinodiwa. Ndapota prinda iyi gwaro rekushandisa uye uzadze ruzivo muchikamu che "For Your Records". Yako inoratidza serial nhamba iri kuseri kwechiratidziro.
• Kuti uwane rumwe ruzivo, ndapota ona chikamu che "Customer Support" mugwaro rino. *Kunyoreswa kwechigadzirwa kunowanikwa munyika dzakasarudzwa chete

Kuraswa kwechigadzirwa pakupera kwehupenyu hwechigadzirwa

• ViewSonic inoremekedza nharaunda uye yakazvipira kushanda uye kurarama girini. Ndatenda nekuve chikamu cheSmartter, Greener Computing.

Ndapota shanyirai ViewSonic website kuti udzidze zvakawanda.

• USA neCanada: http://www.viewsonic.com/company/green/recycle-program/
• Europe: http://www.viewsoniceurope.com/eu/support/call-desk/
• Taiwan: http://recycle.epa.gov.tw/

Kutanga

• Makorokoto nekutenga kwako kwe ViewSonic® LCD kuratidza.
• Zvakakosha! Chengetedza bhokisi rekutanga uye zvese zvekurongedza zvinhu zvemangwana zvekutumira zvinodiwa. CHERECHEDZA: Izwi rekuti "Windows" mune ino mushandisi gwara rinoreva iyo Microsoft Windows inoshanda sisitimu.

Package Zviri mukati

Yako LCD kuratidza package inosanganisira:

• LCD kuratidza
• Simba tambo
• D-Sub tambo
• DVI tambo
• USB tambo
• Quick Start Guide

CHERECHEDZA: Iye INF file inovimbisa kuenderana neWindows anoshanda masisitimu, uye iyo ICM file (Image Ruvara Kufananidza) inovimbisa chaiyo pa-screen mavara. ViewSonic inokurudzira kuti iwe uise zvese INF neICM files.

Quick Installation

• Batanidza tambo yevhidhiyo
  • Ita shuwa kuti zvese LCD kuratidza uye komputa zvakadzimwa.
  • Bvisa zvivharo zvekumashure kana zvichidiwa.
  • Batanidza tambo yevhidhiyo kubva paLCD kuratidza pakombuta.
• Batanidza tambo yemagetsi (uye AC/DC adapta kana zvichidikanwa)
• Batidza LCD kuratidza uye komputa
  • Batidza LCD kuratidza, wobva wabatidza komputa. Kutevedzana uku (LCD kuratidza pamberi komputa) kwakakosha.
• Vashandisi veWindows: Seta iyo timing mode (exampLe: 1024 x 768)
  • Kuti uwane mirairo yekuchinja kugadzirisa uye chiyero chekuvandudza, ona giraidhi kadhi rekushandisa.
• Kuisa kwapera. Nakidzwa chitsva chako ViewSonic LCD kuratidza.

Hardware Installation

• Maitiro Ekubatanidza Ekutanga
• Maitiro Ekubvisa Base

Kudzora kweBata Basa

1. Usati washandisa basa rekubata, ita shuwa kuti tambo ye USB yakabatana uye iyo Windows inoshanda sisitimu yatangwa.
2. Kana iyo yekubata inoshanda, ita shuwa kuti hapana chinhu chekunze munzvimbo dzakatenderedzwa mumufananidzo uri pazasi.

Ita shuwa kuti hapana chinhu chekunze munzvimbo dzakakomberedzwa.

CHERECHEDZA:

• Iyo yekubata basa ingangoda masekonzi manomwe kuti itangezve kana tambo ye USB ikavharwa zvakare kana komputa ikatangazve kubva mukurara.
• Iyo touchscreen inogona kungoona kusvika kune zvigunwe zviviri panguva imwe chete.

Kukwirisa madziro (Sarudzo)

CHERECHEDZA: Yekushandisa chete neUL Yakanyorwa Wall Mount Bracket.

Kuti uwane kit-yekukwirisa kit kana kureba gadziriso hwaro, bata ViewSonic® kana mutengesi wako wemuno. Tarisa kune mirairo inouya ne base mounting kit. Kuti uchinje LCD kuratidza yako kubva padhesiki-yakamisikidzwa kuenda kumadziro-yakaiswa kuratidza, ita zvinotevera:

1. Tsvaga VESA inoenderana nemadziro-inokwira kit inosangana neiyo quaternions muchikamu "Specification".
2. Tarisa kuti bhatani remagetsi rakadzimwa, wobva wadambura tambo yemagetsi.
3. Isa chiratidziro kumeso pasi pajira kana gumbeze.
4. Bvisa chigadziko. (Screws kubvisa kunogona kudikanwa.)
5. Batanidza bhuraketi rekusungirira kubva pamadziro ekuisa kit uchishandisa screws dzehurefu hwakakodzera.
6. Batanidza chiratidziro kumadziro, uchitevera mirairo iri mumadziro-inokwira kit.

Kushandisa LCD Display

Kuisa iyo Nguva Mode

• Kuisa iyo yenguva modhi kwakakosha pakuwedzera kunaka kwechidzitiro chifananidzo uye kuderedza kushushikana kwemaziso. Iyo nguva modhi ine gadziriso (example 1024 x 768) uye mwero wekuzorodza (kana vertical frequency; exampuye 60Hz). Mushure mekuseta iyo nguva modhi, shandisa iyo OSD (On-screen Display) zvinodzora kugadzirisa iyo skrini.
• Kuti uwane mhando yemufananidzo, ndapota shandisa yakakurudzirwa nguva modhi yakanangana neLCD yako yakanyorwa pane "Specification" peji.

Kuseta Iyo Nguva Mode:

• Kugadzirisa chisarudzo: Tsvaga "Chitarisiko uye Kugadziridza" kubva kuDanho rePaneru kuburikidza neKutanga Menyu, uye gadzirisa resolution.
• Kuisa mwero wekuzorodza: ​​Ona yako graphic kadhi mushandisi gwara remirayiridzo.

ZVINOKOSHA: Ndokumbirawo uve nechokwadi chekuti kadhi rako remifananidzo rakaiswa ku60Hz vertical refresh rate seyakakurudzirwa kuseta kune akawanda maLCD kuratidza. Kusarudza isina-inotsigirwa yekumisikidza nguva kunogona kuita kuti pasave nemufananidzo uri kuratidzwa, uye meseji inoratidza "Kunze kweRange" ichaonekwa pachiratidziri.

OSD uye Power Lock Settings

• OSD Kiya: Dzvanya uye bata [1] uye museve wekumusoro ▲ kwemasekonzi gumi. Kana chero mabhatani akadzvanywa meseji OSD Yakakiyiwa icharatidza kwemasekonzi matatu.
• OSD Kiinura: Dzvanya uye bata [1] uye museve wekumusoro ▲ zvakare kwemasekonzi gumi.
• Simba Bhatani Kiya: Dzvanya uye bata [1] uye museve wepasi ▼ kwemasekonzi gumi. Kana bhatani remagetsi rikadzvanywa meseji Bhatani reSimba Yakakiyiwa richaratidza kwemasekonzi matatu. Nekuseta iyi kana isina, mushure mekutadza kwemagetsi, magetsi eLCD yako anozobatidza otomatiki kana simba radzoserwa.
• Power Bhatani Vhura: Dzvanya uye bata [1] uye museve wepasi ▼ zvakare kwemasekonzi gumi.

Kugadzirisa iyo Screen Image

Shandisa mabhatani ari kumberi control panel kuratidza uye kugadzirisa OSD zvidhiraivho zvinoratidzwa pachiratidziri.

Ita zvinotevera kugadzirisa masisitimu ekuratidzira:

1. Kuti uratidze Main Menu, tinya bhatani [1].
   • CHERECHEDZA: Ese mamenu eOSD uye zvigadziriso zvekugadzirisa zvinonyangarika otomatiki mushure memasekondi gumi nemashanu. Izvi zvinogadziriswa kuburikidza neiyo OSD yekumisa nguva yekumisikidza mune yekuseta menyu.
2. Kuti usarudze chekudzora kugadzirisa, dzvanya ▲ kana ▼ kukwenya kumusoro kana pasi muMenu Menyu.
3. Mushure mekutonga kwaunoda kwasarudzwa, tinya bhatani [2].
4. Kuti uchengetedze zvigadziriso uye kubuda mumenyu, tinya bhatani [1] kusvika OSD yanyangarika.

Mazano anotevera anogona kukubatsira kukwenenzvera chiratidziro chako:

• Gadzirisa kadhi repikicha rekombuta kuti ritsigire inokurudzirwa nguva yekumisikidza (tarisa ku "Specifications" peji rekumisikidza yakakurudzirwa yakanangana neLCD kuratidza yako). Kuti uwane mirairo ye "kuchinja chiyero chekuvandudza", ndapota tarisa kune iyo giraidhi kadhi mushandisi gwara.
• Kana zvichidiwa, ita zvigadziriso zviduku uchishandisa H. POSITION uye V. POSITION kusvikira mufananidzo wekrini wanyatsooneka. (Muganho mutema wakatenderedza kumucheto kwechidzitiro haufanire kubata iyo yakavhenekerwa "inoshanda nzvimbo" yeLCD kuratidza.)

Main Menu Controls

Gadzirisa zvinhu zvemenu uchishandisa kumusoro ▲ uye pasi ▼ mabhatani.

CHERECHEDZA: Tarisa iyo Main Menu zvinhu paLCD OSD yako uye tarisa Main Menu Tsananguro pazasi.

Main Menu Tsananguro

CHERECHEDZA: Zvinhu zveMain Menu zvakanyorwa muchikamu chino zvinoratidza zvinhu zvese zveMain Menu zvemhando dzese. Iwo chaiwo Main Menu mamenu anoenderana nechigadzirwa chako ndapota tarisa kune yako LCD OSD Main Menu zvinhu.

• A Audio Kugadzirisa
  • inogadzirisa vhoriyamu, inonzwika ruzha, kana toggles pakati pezvishandiso kana iwe uine inopfuura imwechete sosi.
  • Auto Image Gadzirisa
    otomatiki saizi, nzvimbo, uye zvakanaka tunes chiratidzo chevhidhiyo kubvisa kupenya uye kukanganisa. Dzvanya [2] bhatani kuti uwane mufananidzo unopinza. CHERECHEDZA: Auto Image Gadzirisa inoshanda neakajairika makadhi evhidhiyo. Kana basa iri rikasashanda pane yako LCD kuratidza, wobva wadzikisa chiyero chekuvandudza vhidhiyo kusvika ku60 Hz uye isa gadziriso kune yayo pre-set kukosha.
• B Kupenya
  • inogadzirisa kumashure dema nhanho yemufananidzo wechidzitiro.
• C Ruvara Chinja
  • inopa akati wandei magadzirirwo emavara modhi, anosanganisira preset ruvara tembiricha uye Mushandisi Ruvara modhi iyo inobvumira yakazvimirira kugadzirisa tsvuku (R), girinhi (G), uye bhuruu (B). Nzvimbo yefekitari yechigadzirwa ichi ndeyako.
  • Kusiyanisa
    inogadzirisa mutsauko uripo pakati peiyo mufananidzo kumashure (dema nhanho) uye kumberi (chena nhanho).
• Ini Ruzivo
  • inoratidza nguva yenguva (yekuisa chiratidzo chevhidhiyo) ichibva pakadhi remifananidzo mukombuta, nhamba yeLCD modhi, nhamba yeserial, uye ViewSonic® website URL. Ona rako giraidhi kadhi mushandisi gwara remirayiridzo pakushandura resolution uye zororo reti (yakatarwa frequency).
    CHERECHEDZA: VESA 1024 x 768 @ 60Hz (example) zvinoreva kuti gadziriso i1024 x 768 uye mwero wekuzorodza i60 Hertz.
  • Input Sarudza
    inochinja pakati pezvinopinza kana uine anopfuura komputa imwe yakabatana neLCD kuratidza.
• M Chinyorwa Mufananidzo Gadziridza
  • inoratidza iyo Manual Image Chinja menyu. Iwe unogona manyore kumisikidza akasiyana emhando yemhando yekugadzirisa.
  • Memory Recall
    inodzosera zvigadziriso kumashure kune zvigadziriso zvefekitori kana chiratidziro chiri kushanda mufekitori Preset Nguva yeModhi yakanyorwa muMakakatanwa ebhuku rino.
  • Kunze: Kudzora uku hakukanganise shanduko dzakaitwa neMutauro Sarudza kana Power Lock kuseta.
  • Memory Recall ndiyo yakasarudzika se-yakatumirwa dhizaini gadziriso uye marongero. Memory Recall ndiyo mamiriro ayo chigadzirwa chinokodzera ENERGY STAR®. Chero shanduko yekusarudzika se-yakatumirwa dhizaini gadziriso uye zvigadziriso zvingashandura mashandisiro esimba, uye zvinogona kuwedzera mashandisiro esimba kupfuura miganhu inodiwa ENERGY STAR® qualification, sezviri kushanda.
  • ENERGY STAR® seti yemitemo yekuchengetedza simba yakapihwa neUS Environmental Protection Agency (EPA). ENERGY STAR® chirongwa chakabatana cheUS Environmental Protection Agency uye US Department of Energy inotibatsira tese kuchengetedza mari nekudzivirira
    zvakatipoteredza kuburikidza nemagetsi ekugadzira zvigadzirwa uye
    maitiro.
• S Setup Menyu
  • inogadzirisa On-screen Display (OSD) marongero.

Power Management

Ichi chigadzirwa chinopinda muKurara / Kudzima modhi ine dema skrini uye yakaderedzwa mashandisiro emagetsi mukati me3 maminetsi asina chiratidzo chekuisa.

Mamwe Mashoko

Zvinotsanangurwa

LCD	Type	TFT (Thin Film Transistor), Active Matrix 1920 x 1080 LCD,
		0.24825 mm pixel pitch pitch
	Kukura Kwekuratidza	Metric: 55cm
		Humambo: 22" (21.5" viewkugona)
	Ruvara Sefa	RGB yakatwasuka mutsetse
	Glass Surface	Anti-Glare
Input Signal	Vhidhiyo Sync	RGB analogi (0.7/1.0 Vp-p, 75 ohms) / TMDS Digital (100ohms)
		Separate Sync
		fh:24-83 kHz, fv:50-76 Hz
Kugarisana	PC	Kusvika 1920 x 1080 Isina-yakapindirana
	Macintosh	Simba Macintosh kusvika 1920 x 1080
Resolution1	Recommended	1920x1080 @ 60Hz
	Inotsigirwa	1680x1050 @ 60Hz
		1600x1200 @ 60Hz
		1440 x 900 @ 60, 75 Hz
		1280 x 1024 @ 60, 75 Hz
		1024 x 768 @ 60, 70, 72, 75 Hz
		800 x 600 @ 56, 60, 72, 75 Hz
		640 x 480 @ 60, 75 Hz
		720x400 @ 70Hz
Simba	Voltage	100-240 VAC, 50/60 Hz (auto switch)
Ratidza nzvimbo	Full Scan	476.6 mamirimita (H) x 268.11 mm (V)
		18.77" (H) x 10.56" (V)
Kushanda	Tembiricha	+32° F kusvika +104° F (0° C kusvika +40° C)
mamiriro	Humidity	20% kusvika 90% (isina-condensing)
	Altitude	Kusvika 10,000 tsoka
Storage	Tembiricha	-4 ° F kusvika + 140 ° F (-20 ° C kusvika + 60 ° C)
mamiriro	Humidity	5% kusvika 90% (isina-condensing)
	Altitude	Kusvika 40,000 tsoka
Dimensions	Zvenyama	511 mm (W) x 365 mm (H) x 240 mm (D)
		20.11" (W) x 14.37" (H) x 9.45" (D)
Gomo reMasvingo	Max Loading	Hole pattern (W x H; mm)	Interface Pad (W x H x D)	Pad Hole	Kurukura Q'ty & Tsanangudzo
	14kg	100mm x 100mm	115 mm x 115 mm x 2.6 mm	Ø 5mm	4 chidimbu M4 x 10mm

1 Usaise kadhi remifananidzo mukombuta yako kuti ripfuure aya maitiro enguva; kuita izvi kunogona kukonzera kukanganisa zvachose kune LCD kuratidza.

Kuchenesa LCD Display

• ONA shuwa kuti LCD DISPLAY YADZIMWA.
• Usafe wakapfapfaidza KANA KUDIRIRA CHETE CHINONYENGETERA PAMUSORO KANA KUTI MAKASI.

Kuchenesa skrini:

• Pukuta skrini nejira rakachena, rakapfava, risina jira. Izvi zvinobvisa huruva nezvimwe zvimedu.
• Kana iyo skrini ichiri isina kuchena, isa shoma shoma isiri-ammonia, isina-doro yakavakirwa girazi rinoshenesa pamucheka wakachena, wakapfava, usina chinhu, uye bvisa chidzitiro.

Kuchenesa kesi:

• Shandisa jira rakapfava, rakaoma.
• Kana iyo kesi ichiri isina kuchena, shandisa diki diki isiri-ammonia, isiri-doro yakavakirwa, ine nyoro isina-abrasive detergent pamucheka wakachena, wakapfava, usina lint, wozopukuta pamusoro.

Disclaimer

• ViewSonic® haikurudzire kushandiswa kwechero ammonia kana doro-based cleaners paLCD kuratidza skrini kana kesi. Mamwe makemikari ekuchenesa anonzi anokanganisa skrini uye / kana kesi yeLCD kuratidza.
• ViewSonic haizovi nemhosva yekukuvara kunokonzerwa nekushandiswa kwechero amoniya kana yekuchenesa doro.

Kugadzirisa matambudziko

Hapana simba

• Ita shuwa bhatani remagetsi (kana switch) iri ON.
• Ita shuwa kuti A/C tambo yemagetsi yakabatana zvakachengeteka kune LCD kuratidza.
• Batai imwe mudziyo wemagetsi (seredhiyo) mudura remagetsi kuti muone kuti chinobuda chiri kupa vhoriyamu yakakodzera.tage.

Simba riri ON asi hapana skrini skrini

• Ita shuwa kuti tambo yevhidhiyo yakapihwa neLCD kuratidza yakachengetedzwa zvakasimba kune vhidhiyo inobuda port iri kuseri kwekombuta. Kana imwe magumo etambo yevhidhiyo isina kusungirirwa zvachose kune LCD kuratidza, nyatso chengetedza kune iyo LCD kuratidza.
• Gadzirisa kupenya uye kusiyana.

Mavara asina kunaka kana asina kujairika

• Kana paine chero mavara (tsvuku, girini, kana bhuruu) asipo, tarisa vhidhiyo tambo kuti uone kuti yakanyatsochengetedzwa. Pini dzakasununguka kana dzakaputswa mukombi yekubatanidza dzinogona kukonzera kubatana kwakashata.
• Batanidza LCD kuratidza kune imwe komputa.
• Kana uine kadhi remifananidzo rekare, bata ViewSonic® yeiyo isiri-DDC adapta.

Kudzora mabhatani haashande

• Dzvanya bhatani rimwe chete panguva.

Mutengi Support

Kuti uwane rutsigiro rwehunyanzvi kana sevhisi yechigadzirwa, ona tafura iri pazasi kana kubata mutengesi wako.

CHERECHEDZA: Iwe uchazoda iyo serial nhamba nhamba.

Nyika/Nzvimbo	Website	Nyika/Nzvimbo	Website
Asia Pacific uye Africa
Ositireriya	www.viewsonic.com/au/	Bhangiradheshi	www.viewsonic.com/bd/
中国 (China)	www.viewsonic.com.cn	(繁體 中文)	www.viewsonic.com/hk/
Hong Kong (Chirungu)	www.viewsonic.com/hk- sn/	India	www.viewsonic.com/in/
Indonezhiya	www.viewsonic.com/id/	Izirayeri	www.viewsonic.com/il/
日本 (Japan)	www.viewsonic.com/jp/	Korea	www.viewsonic.com/kr/
Marazhiya	www.viewsonic.com/my/	Middle East	www.viewsonic.com/me/
Mayanima	www.viewsonic.com/mm/	Neparo	www.viewsonic.com/np/
Nyuzirendi	www.viewsonic.com/nz/	Pakisitani	www.viewsonic.com/pk/
Firipaini	www.viewsonic.com/ph/	Singapowo	www.viewsonic.com/sg/
臺灣 (Taiwan)	www.viewsonic.com/tw/	ประเทศไทย	www.viewsonic.com/th/
Vhetinamu	www.viewsonic.com/vn/	South Africa & Mauritius	www.viewsonic.com/za/
Americas
Nyika dzakabatana	www.viewsonic.com/us	Kanadha	www.viewsonic.com/us
Latin America	www.viewsonic.com/la
Europe
Europe	www.viewsonic.com/eu/	Furanzi	www.viewsonic.com/fr/
Deutschland	www.viewsonic.com/de/	Khazakisitani	www.viewsonic.com/kz/
Россия	www.viewsonic.com/ru/	España	www.viewsonic.com/es/
Türkiye	www.viewsonic.com/tr/	Україна	www.viewsonic.com/ua/
Nyika dzakabatana	www.viewsonic.com/uk/

Yakakwana Warranty

ViewSonic® LCD Display

Izvo waranti inovhara:

ViewSonic inobvumira zvigadzirwa zvayo kuti zvisave nekuremara mune zvinhu uye kugadzirwa, pasi pekushandiswa kwakajairwa, panguva yewaranti. Kana chigadzirwa chikaratidza kuve chakaremara muzvinhu kana kugadzirwa panguva yewaranti, ViewSonic ichaita, pane yayo yega sarudzo, kugadzirisa kana kutsiva chigadzirwa nechigadzirwa chakafanana. Chigadzirwa chinotsiviwa kana zvikamu zvinogona kusanganisira zvakagadziridzwa kana kugadziridzwa zvikamu kana zvikamu.

Inguva yakareba sei waranti inoshanda:

ViewSonic LCD inoratidzira inotenderwa pakati pemakore 1 kusvika matatu, zvichienderana nenyika yako yaunotenga, yezvikamu zvese zvinosanganisira mwenje sosi uye yevashandi vese kubva pazuva rekutanga kutenga mutengi.

Ndiani waranti inodzivirira:

Iyi waranti inoshanda kune wekutanga mutengi mutengi.

Izvo waranti isingabatanidzi:

1. Chero chigadzirwa chine serial nhamba yakasvibiswa, yakagadziridzwa kana kubviswa.
2. Kukuvadzwa, kuora kana kusashanda kunokonzerwa ne:
   1. Tsaona, kushandisa zvisizvo, kuregeredza, moto, mvura, mheni, kana zvimwe zviitiko zvechisikigo, kugadziridzwa kwechigadzirwa zvisina mvumo, kana kutadza kutevedzera mirairo inopihwa nechigadzirwa.
   2. Chero kukanganisa kwechigadzirwa nekuda kwekutumira.
   3. Kubviswa kana kuiswa kwechigadzirwa.
   4. Zvinokonzera kunze kune chigadzirwa, semagetsi emagetsi kuchinja kana kukundikana.
   5. Kushandiswa kwezvinhu kana zvikamu zvisiri kusangana ViewSonic's specifications.
   6. Normal kupfeka uye kubvarura.
   7. Chero chimwe chikonzero chisingaenderane nekuremara kwechigadzirwa.
3. Chero chigadzirwa chinoratidza mamiriro anowanzozivikanwa se "mufananidzo kutsva-mukati" izvo zvinoguma kana mufananidzo wakamira uchiratidzwa pachigadzirwa kwenguva yakareba.
4. Kubvisa, kuisirwa, imwe nzira yekufambisa, inishuwarenzi, uye kuseta-up sevhisi machaji.

Nzira yekuwana sevhisi:

1. Kuti uwane ruzivo rwekugamuchira sevhisi pasi pewaranti, bata ViewSonic Mutengi Tsigiro (Ndokumbira utarise kune Mutengi Tsigiro peji). Iwe unozofanirwa kupa chigadzirwa chako nhamba yeserial.
2. Kuti uwane sevhisi yewaranti, iwe unozofanirwa kupa (a) iyo yekutanga date yekutengesa slip, (b) zita rako, (c) kero yako, (d) tsananguro yedambudziko, uye (e) serial nhamba ye chigadzirwa.
3. Tora kana kutumira chigadzirwa chekutakura chakabhadharwa kare mugaba rekutanga kune ane mvumo ViewSonic service centre kana ViewSonic.
4. Kuti uwane rumwe ruzivo kana zita reari pedyo ViewSonic service centre, kuonana ViewSonic.

Kuganhurirwa kwezvibvumirano zvinorehwa:

Iko hakuna waranti, yekutaura kana yekurevesa, inodarika tsananguro iri pano kusanganisira iyo inorehwa waranti yekutengesa uye kusimba kune chimwe chinangwa.

Kusabatanidzwa kwekukuvadza:

ViewMhosva yeSonic inongogumira pamutengo wekugadzirisa kana kutsiva chigadzirwa. ViewSonic haazove nemhosva ye:

1. Kukuvadzwa kune chimwe chivakwa chinokonzerwa nechero hurema muchigadzirwa, kukuvadzwa kunoenderana nekusagadzikana, kurasikirwa kwekushandisa chigadzirwa, kurasikirwa nenguva, kurasikirwa kwepurofiti, kurasikirwa nemukana webhizinesi, kurasikirwa kwekufarira, kukanganisa hukama hwebhizinesi, kana kumwe kurasikirwa kwekutengesa. , kunyangwe vakarairwa nezve mukana wekukuvadza kwakadaro.
2. Chero kumwe kukuvadza, kungave kwakaitika, kwakakosha kana neimwe nzira.
3. Chero chirevo chinopesana nemutengi nemumwe bato.
4. Kugadzirisa kana kuyedza kugadzirisa nemunhu asina kupihwa mvumo na ViewSonic.

Mhedzisiro yemutemo wenyika:

• Waranti iyi inokupa kodzero dzepamutemo, uye unogonawo kuva nedzimwe kodzero dzinosiyana kubva kunyika nenyika. Dzimwe nyika hadzitenderi zvipimo pawaranti inorehwa uye/kana kuti haibvumire kusabatanidzwa kwezvinoitika kana zvinokonzeresa kukuvadzwa, saka zvipimo zviri pamusoro uye kusabatanidzwa zvinogona kusashanda kwauri.

Kutengeswa kunze kweUSA neCanada:

• Kuti uwane ruzivo rwewaranti uye sevhisi pa ViewZvigadzirwa zveSonic zvinotengeswa kunze kweUSA neCanada, bata ViewSonic kana yenzvimbo yako ViewSonic mutengesi.
• Nguva yewarandi yechigadzirwa ichi mu mainland China (Hong Kong, Macao neTaiwan Dzasiyiwa) inoenderana nemitemo nemamiriro eKuchengetwa Kadhi Yevimbiso.
• Kune vashandisi muEurope neRussia, zvizere nezve garandi yakapihwa inogona kuwanikwa mu www. viewsoniceurope.com pasi peRutsigiro/Warranty Ruzivo.
• LCD Warranty Term Template MuUG VSC_TEMP_2007

Mexico Limited Waranti

ViewSonic® LCD Display

Izvo waranti inovhara:

ViewSonic inobvumira zvigadzirwa zvayo kuti zvisave nekuremara mune zvinhu uye kugadzirwa, pasi pekushandiswa kwakajairwa, panguva yewaranti. Kana chigadzirwa chikaratidza kuve chakaremara muzvinhu kana kugadzirwa panguva yewaranti, ViewSonic ichaita, pane yayo yega sarudzo, kugadzirisa kana kutsiva chigadzirwa nechigadzirwa chakafanana. Chigadzirwa chekutsiva kana zvikamu zvinogona kusanganisira zvakagadziridzwa kana kugadziridzwa zvikamu kana zvikamu & accessories.

Inguva yakareba sei waranti inoshanda:

ViewSonic LCD inoratidzira inotenderwa pakati pemakore 1 kusvika matatu, zvichienderana nenyika yako yaunotenga, yezvikamu zvese zvinosanganisira mwenje sosi uye yevashandi vese kubva pazuva rekutanga kutenga mutengi.

Ndiani waranti inodzivirira:

Iyi waranti inoshanda kune wekutanga mutengi mutengi.

Izvo waranti isingabatanidzi:

1. Chero chigadzirwa chine serial nhamba yakasvibiswa, yakagadziridzwa kana kubviswa.
2. Kukuvadzwa, kuora kana kusashanda kunokonzerwa ne:
   1. Tsaona, kushandisa zvisizvo, kuregeredza, moto, mvura, mheni, kana zvimwe zviitiko zvechisikigo, kugadziridzwa kwechigadzirwa kusingatenderwe, kuedza kugadzirisa zvisiri pamutemo, kana kutadza kutevedzera mirairo inopihwa nechigadzirwa.
   2. Chero kukanganisa kwechigadzirwa nekuda kwekutumira.
   3. Zvinokonzera kunze kune chigadzirwa, semagetsi emagetsi kuchinja kana kukundikana.
   4. Kushandiswa kwezvinhu kana zvikamu zvisiri kusangana ViewSonic's specifications.
   5. Normal kupfeka uye kubvarura.
   6. Chero chimwe chikonzero chisingaenderane nekuremara kwechigadzirwa.
3. Chero chigadzirwa chinoratidza mamiriro anowanzozivikanwa se "mufananidzo kutsva-mukati" izvo zvinoguma kana mufananidzo wakamira uchiratidzwa pachigadzirwa kwenguva yakareba.
4. Kubvisa, kuisa, inishuwarenzi, uye kuseta-sevhisi machaji.

Nzira yekuwana sevhisi:

Kuti uwane ruzivo rwekugamuchira sevhisi pasi pewaranti, bata ViewSonic Mutengi Tsigiro (Ndokumbira utarise kune yakanamatira Mutengi Tsigiro peji). Iwe unozofanirwa kupa chigadzirwa chako nhamba yechigadzirwa, saka ndapota rekodha ruzivo rwechigadzirwa munzvimbo yakapihwa pazasi pakutenga kwako kuti ushandise mune ramangwana. Ndapota chengetedza risiti yako yehumbowo hwekutenga kuti utsigire chikumbiro chako chewaranti.

1. ZveMarekodhi Ako
   • Product Name: ___________________________________
   • Muenzaniso Nhamba: _________________________________
   • Gwaro Nhamba: ___________________________________
   • Siriyero nhamba: _________________________________
   • Zuva Rokutengwa: __________________________________________
   • Waranti Yakawedzerwa Kutenga? ____________________ (Y/N)
   • Kana zvakadaro, waranti inopera zuva ripi? _______________
2. Kuti uwane sevhisi yewaranti, iwe unozofanirwa kupa (a) iyo yekutanga date yekutengesa slip, (b) zita rako, (c) kero yako, (d) tsananguro yedambudziko, uye (e) serial nhamba ye chigadzirwa.
3. Tora kana kutumira chigadzirwa mumudziyo wekutanga wekurongedza kune ane mvumo ViewSonic service nzvimbo.
4. Mari yekufambisa yekufamba-famba yezvigadzirwa zvewaranti ichabhadharwa ne ViewSonic.

Kuganhurirwa kwezvibvumirano zvinorehwa:

Iko hakuna waranti, yekutaura kana yekurevesa, inodarika tsananguro iri pano kusanganisira iyo inorehwa waranti yekutengesa uye kusimba kune chimwe chinangwa.

Kusabatanidzwa kwekukuvadza:

ViewMhosva yeSonic inongogumira pamutengo wekugadzirisa kana kutsiva chigadzirwa. ViewSonic haazove nemhosva ye:

1. Kukuvadzwa kune chimwe chivakwa chinokonzerwa nechero hurema muchigadzirwa, kukuvadzwa kunoenderana nekusagadzikana, kurasikirwa kwekushandisa chigadzirwa, kurasikirwa nenguva, kurasikirwa kwepurofiti, kurasikirwa nemukana webhizinesi, kurasikirwa kwekufarira, kukanganisa hukama hwebhizinesi, kana kumwe kurasikirwa kwekutengesa. , kunyangwe vakarairwa nezve mukana wekukuvadza kwakadaro.
2. Chero kumwe kukuvadza, kungave kwakaitika, kwakakosha kana neimwe nzira.
3. Chero chirevo chinopesana nemutengi nemumwe bato.
4. Kugadzirisa kana kuyedza kugadzirisa nemunhu asina kupihwa mvumo na ViewSonic.

Ruzivo rwekudhumhana rweKutengesa & Akatenderwa Sevhisi (Centro Autorizado de Servicio) mukati meMexico:
Zita, kero, yemugadziri nevatengesi: México, Av. de la Palma # 8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Tel: (55) 3605-1099   http://www.viewsonic.com/la/soporte/index.htm
NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004
Hermosillo:	Villahermosa:
Distribuciones uye Servicios Computacionales SA de CV.	Compumantenimietnos Garantizados, SA de CV
Calle Juarez 284 yemunharaunda 2	AV. GREGORIO MENDEZ #1504
Col. Bugambilias CP: 83140	COL, FLORIDA CP 86040
Tel: 01-66-22-14-9005	Runhare: 01 (993) 3 52 00 47 / 3522074 / 3 52 20 09
E-Mail disc2@hmo.megared.net.mx	E-Mail compumantenimientos@prodigy.net.mx
Puebla, Pue. (Matriz):	Veracruz, Vera.:
RENTA Y DATOS, SA DE CV Domicilio:	CONEXION Y DESARROLLO, SA DE CV Av. America #419
29 SUR 721 KOL. LA PAZ	ENTRE PINZÓN Y ALVARADO
72160 PUEBLA, PUE.	Fracc. Reforma CP 91919
Tel: 01(52).222.891.55.77 CON 10 LINEAS	Tel: 01-22-91-00-31-67
E-Mail datos@puebla.megared.net.mx	E-Mail gacosta@qplus.com.mx
Chihuahua	Cuernavaca
Soluciones Globales en Komputa	Nhoroondo yeCuernavaca SA yeCV
C. Magisterio # 3321 Col. Magisterial	Francisco Leyva # 178 Col. Miguel Hidalgo
Chihuahua, Chih.	CP 62040, Cuernavaca Morelos
Nhare: 4136954	Nhare: 01 777 3180579 / 01 777 3124014
E-Mail Cefeo@soluglobales.com	E-Mail aquevedo@compusupportcva.com
Federal District:	Guadalajara, Jal.:
QPLUS, SA yeCV	SERVICRECE, SA de CV
Av. Coyoacán 931	Av. Niños Héroes # 2281
Col. Del Valle 03100, México, DF	Col. Arcos Sur, Sector Juárez
Tel: 01(52)55-50-00-27-35	44170, Guadalajara, Jalisco
E-Mail : gacosta@qplus.com.mx	Tel: 01(52)33-36-15-15-43
	E-Mail mmiranda@servicrece.com
Guerrero Acapulco	Monterrey:
GS Computación (Grupo Sesicomp)	Global Chigadzirwa Services
Progreso #6-A, Colo Centro	Mar Caribe # 1987, Esquina con Golfo Pérsico
39300 Acapulco, Guerrero	Fracc. Bernardo Reyes, CP 64280
Tel: 744-48-32627	Monterrey NL México
	Nhare: 8129-5103
	E-Mail aydeem@gps1.com.mx
MERIDA:	Oaxaca, Oax.:
ELECTROSER	CENTRO DE DISTRIBUCION Y
Av Reforma Nha. 403Gx39 y 41	SERVICIO, SA de CV
Mérida, Yucatán, México CP97000	Murguía # 708 PA, Col. Centro, 68000, Oaxaca
Tel: (52) 999-925-1916	Tel: 01(52)95-15-15-22-22
E-Mail rrrb@sureste.com	Fax: 01(52)95-15-13-67-00
	E-mail. gpotai2001@hotmail.com
Tijuana:	KUTI USATSIGIRO:
STD	ViewIyo kambani Sonic Corporation
Av Ferrocarril Sonora #3780 LC	381 Brea Canyon Road, Walnut, CA. 91789 USA
Col 20 de Novembre	Tel: 800-688-6688 (Chirungu); 866-323-8056 (ChiSpanish);
Tijuana, Mexico	Fax: 1-800-685-7276
	E-Mail http://www.viewsonic.com

Mibvunzo Inowanzo bvunzwa

Chii chinonzi Viewsonic TD2220-2 LCD Display?

The Viewsonic TD2220-2 ndeye 22-inch LCD touchscreen inoratidzira yakagadzirirwa kushandiswa kwakasiyana, kusanganisira bhizinesi, dzidzo, uye kushandiswa kwemba.

Ndezvipi zvakakosha zve Viewsonic TD2220-2?

Zvinhu zvakakosha zve Viewsonic TD2220-2 inosanganisira 1920x1080 Yakazara HD resolution, gumi-point touchscreen mashandiro, DVI uye VGA mapipu, uye ergonomic dhizaini.

Ndiyo Viewsonic TD2220-2 inoenderana neWindows uye Mac?

Hongu Viewsonic TD2220-2 inoenderana neWindows uye Mac masisitimu anoshanda.

Ndinogona kushandisa iyo Viewsonic TD2220-2 sechipiri chekutarisa kune yangu laptop?

Hongu, unogona kushandisa Viewsonic TD2220-2 seyechipiri yekutarisisa yelaptop yako nekuibatanidza kuburikidza neanowanikwa mavhidhiyo ekuisa.

Anodaro Viewsonic TD2220-2 inouya nevatauri vakavakirwa-mukati?

Kwete, ivo Viewsonic TD2220-2 haina vatauri vakavakirwa-mukati. Ungangoda kubatanidza vatauri vekunze kune odhiyo.

Ndeipi nguva yekupindura ye Viewsonic TD2220-2?

The Viewsonic TD2220-2 ine inokurumidza 5ms mhinduro nguva, ichiita kuti ive yakakodzera kumitambo uye multimedia application.

Ndinogona kukwira Viewsonic TD2220-2 pamadziro?

Hongu Viewsonic TD2220-2 ndeye VESA gomo inoenderana, ichikutendera iwe kuti uiise pamadziro kana ruoko runogadziriswa.

Anodaro Viewsonic TD2220-2 inotsigira akawanda-ekubata gestures?

Hongu Viewsonic TD2220-2 inotsigira akawanda-ekubata gestures, kusanganisira pinch-to-zoom uye swipe, nekuda kweiyo gumi-point touchscreen tekinoroji.

Ndeipi nguva yewaranti ye Viewsonic TD2220-2?

Nguva yewaranti ye Viewsonic TD2220-2 inogona kusiyana, asi inowanzouya ne3-year limited waranti.

Ndinogona kushandisa peni kana peni neiyo Viewsonic TD2220-2?

Ehe, iwe unogona kushandisa chinyoreso chinowirirana kana peni neiyo Viewsonic TD2220-2 kune mamwe chaiwo ekubata sikirini kusangana.

Ndiyo Viewsonic TD2220-2 simba-rinoshanda?

Hongu Viewsonic TD2220-2 yakagadzirirwa kuve-inoshanda nesimba uye inoenderana nemirairo yekuchengetedza simba.

Anodaro Viewsonic TD2220-2 ine ruvara calibration chimiro?

Hongu Viewsonic TD2220-2 inobvumira kurongeka kwemavara, kuve nechokwadi chemavara akajeka uye ane simba.

Reference Viewsonic TD2220-2 LCD Ratidza User Guide-device.report

References

• User Manual