UM1075
pukapuka kaiwhakamahi
ST-LINK/V2 i roto i-iahiko patuiro/kaihōtaka
mo STM8 me STM32
Kupu Whakataki
Ko te ST-LINK/V2 he kaiwhakairo / hötaka-a-roto mo te STM8 me te STM32 microcontrollers. Ko te kōwae atanga waea kotahi (SWIM) me te JTAGKo nga atanga waea patuiro (SWD) e whakahaere ana i te whakawhitiwhiti korero me tetahi STM8, STM32 microcontroller ranei e mahi ana i runga i te papa tono.
I tua atu i te whakarato i nga mahi rite tonu o te ST-LINK/V2, kei te ST-LINK/V2-ISOL te wehewehenga mamati i waenga i te PC me te papa tono whaainga. Ka mau ano te voltagtae atu ki te 1000 V RMS.
Ko te atanga tere-katoa USB ka taea te whakawhitiwhiti korero me te PC me:
- Nga taputapu STM8 ma te rorohiko ST Visual Develop (STVD), ST Visual Program (STVP) ranei (e waatea ana mai i STMicroelectronics)
- Ko nga taputapu STM32 ma te IAR™, Keil ®, STM32CubeIDE, STM32CubeProgrammer, me STM32CubeMonitor taiao whanaketanga whakauru.
Ngā āhuatanga
- 5 V te hiko i tukuna mai e te hononga USB
- USB 2.0 atanga hototahi-tere katoa
- USB paerewa-A ki Mini-B taura
- Ko nga ahuatanga kaukau-motuhake
– 1.65 ki te 5.5 V tono voltage tautokona ana i te atanga SWIM
– SWIM iti-tere me te tere-tere aratau tautoko
– Reeti tere hōtaka SWIM: 9.7 me te 12.8 Kbytes/s, ia, mo te tere iti me te tere teitei
– SWIM taura mo te hono ki te tono ma te ERNI paerewa poutū (whakaaro: 284697, 214017 ranei) whakapae ranei (whakaaro: 214012) tūhono
– SWIM taura mo te hono atu ki te tono ma te pane pane, te hono ranei 2.54 mm pitch - JTAG/SWD (Serial Wire Debug) nga ahuatanga motuhake
– 1.65 ki te 3.6 V tono voltage tautokohia ana i runga i te JTAGatanga /SWD me te 5 V whakaarata whakauru (a)
– JTAG taura mo te hono ki te paerewa JTAG 20-pin pitch 2.54 mm tūhonohono
– Tautoko JTAG whakawhitiwhiti, tae atu ki te 9 MHz (taunoa: 1.125 MHz)
– Ka tautokohia te patuiro waea rangatū (SWD) ki te 4 MHz (taunoa: 1.8 MHz), me te waea rangatū viewer (SWV) whakawhitinga korero, tae atu ki te 2 MHz - Kei te tautokohia te waahanga whakahou firmware tika (DFU)
- Te LED tūnga, kei te kimo i te wa e korero ana me te PC
- 1000 V RMS taratahi teitei voltage (ST-LINK/V2-ISOL anake)
- Te pāmahana whakahaere mai i te 0 ki te 50 nga nekehanga Celsius
Te ota korero
Hei tono i te ST-LINK/V2, tirohia te Ripa 1.
Ripanga 1. Rarangi o nga waehere ota
| Waehere tono | Whakaahuatanga ST-LINK |
| ST-LINK/V2 | Kaitautoko-a-hahiko/kaiwhakahotaka |
| ST-LINK/V2-ISOL | Kaitautoko-a-roto-kaiwhakahotaka me te wehe mamati |
a. Ka taea e te ST-LINK/V2 te whakawhitiwhiti korero me nga whaainga kei raro iho i te 3.3 V engari ka whakaputa tohu whakaputa i tenei voltage taumata. Ko nga whaainga STM32 he pai ki tenei waahanga nuitage. Mena he maamaa etahi atu waahanga o te papa whaainga, whakamahia te ST-LINK/V2-ISOL, STLINK-V3MINIE, STLINK-V3SET ranei me te urutau B-STLINK-VOLT hei karo i te paanga o te nui.tage werohia i runga i te papa.
Nga ihirangi hua
Ko nga taura i tukuna i roto i te hua ka whakaatuhia i te Whakaahua 2 me te Whakaahua 3. Kei roto (mai i te maui ki te taha matau):
- USB paerewa-A ki Mini-B taura (A)
- ST-LINK/V2 patuiro me te hotaka (B)
- Kauhoe te utu iti te hono (C)
- rīpene papatahi kauhoe me te tūhono ERNI paerewa i tetahi pito (D)
- JTAG rīpene papatahi SWD me SWV rānei me te tūhono 20-titi (E)
whirihoranga taputapu
I hoahoatia te ST-LINK/V2 huri noa i te taputapu STM32F103C8, e whakauru ana i te Arm ®(a) Cortex® tino mahi.
-M3 matua. Kei te waatea i roto i te kete TQFP48.
E whakaatu ana i te Whakaahua 4, ka whakaratohia e te ST-LINK/V2 nga hononga e rua:
- He hononga STM32 mo te JTAG/SWD me SWV atanga
- He hononga STM8 mo te atanga SWIM
Ko te ST-LINK/V2-ISOL e whakarato ana i tetahi hononga mo te STM8 SWIM, STM32 JTAG/SWD, me nga atanga SWV.
- A = STM32 JTAG me te tūhono ūnga SWD
- B = STM8 SWIM tūhono ūnga
- C = STM8 SWIM, STM32 JTAG, me te tūhono ūnga SWD
- D = Whakawhitiwhiti mahi LED
4.1 Hononga me STM8
Mo te whakawhanaketanga o nga tono e pa ana ki nga microcontrollers STM8, ka taea te hono atu te ST-LINK/V2 ki te papa whaainga ma nga taura rereke e rua, i runga i te hononga e waatea ana i te papa tono.
Ko enei taura:
- He rīpene papatahi kauhoe me te tūhono ERNI paerewa i tetahi pito
- He taura SWIM me nga 4-titi e rua, 2.54 mm nga hononga hono, SWIM ranei nga waea motuhake.
4.1.1 Paerewa hononga ERNI me te rīpene papatahi SWIM
Ko te ahua 5 e whakaatu ana me pehea te hono i te ST-LINK/V2 mena kei te noho he hononga ERNI 4-pin SWIM i runga i te papa tono.
- A = Papa tono whainga me te hononga ERNI
- B = Waea taura me te hononga ERNI i tetahi pito
- C = STM8 SWIM tūhono ūnga
- Tirohia te Whakaahua 11
Ko te ahua 6 e whakaatu ana kei te ngaro te titi 16 i runga i te hononga hononga ST-LINK/V2-ISOL. Ko tenei titi ngaro ka whakamahia hei taviri haumaru i runga i te hononga taura, hei whakapumau i te tika o te tuunga o te taura SWIM i runga i te hononga whainga tae noa nga titi e whakamahia ana mo te SWIM me te JTAG taura.
4.1.2 Hononga SWIM utu iti
Ko te Whakaaturanga 7 e whakaatu ana me pehea te hono i te ST-LINK/V2 mena he hononga 4-pin, 2.54 mm, iti te utu SWIM kei runga i te papa tono.
- A = Papa tono whainga me te 4-titi, 2.54 mm, te hono iti-utu
- B = Tauera waea me te hono 4-titi, te taura waea motuhake ranei
- C = STM8 SWIM tūhono ūnga
- Tirohia te Whakaahua 12
4.1.3 Nga tohu kauhoe me nga hononga
Ko te ripa 2 he whakarāpopoto i ngā ingoa tohu, ngā mahi, me ngā tohu hononga ūnga i te whakamahi i te taura waea me te hono 4-titi.
Ripanga 2. Kauhoe nga hononga riipene papatahi mo ST-LINK/V2
| Pin no. | Ingoa | Mahi | Hononga whainga |
| 1 | VDD | WCC ūnga(1) | MCU VCC |
| 2 | RARAUNGA | KAUKAU | MCU SWIM titi |
| 3 | GND | WHENUA | GND |
| 4 | WHAKATURU | WHAKATURU | MCU RESET pine |
1. Ko te mana hiko mai i te papa tono e hono ana ki te ST-LINK/V2 patuiro me te papa kaupapa hei whakarite i te hototahi tohu i waenga i nga papa e rua.
Ko te ripa 3 e whakarāpopoto ana i nga ingoa tohu, nga mahi, me nga tohu hononga e whaaia ana ma te whakamahi i te taura waea motuhake.
I te mea ko te taura waea motuhake SWIM he hononga motuhake mo nga titi katoa i tetahi taha, ka taea te hono i te ST-LINK / V2-ISOL ki te papa tono me te kore he hononga SWIM paerewa. I runga i tenei riipene papatahi, he tae motuhake me tetahi tapanga hei whakangawari i te hononga ki runga i nga tohutoro tohu tohu katoa.
Ripanga 3. Kauhoe nga hononga taura utu iti mo ST-LINK/V2-ISOL
| Tae | Ingoa titi taura | Mahi | Hononga whainga |
| Whero | CCTV | WCC ūnga(1) | MCU VCC |
| Kakariki | UART-RX | Kaore i whakamahia | Kua rahuitia (2) (kaore i honoa ki te papa whainga) |
| Kahurangi | UART-TX | ||
| Kōwhai | BOOTO | ||
| Karaka | KAUKAU | KAUKAU | MCU SWIM titi |
| Pango | GND | WHENUA | GND |
| Mā | kauhoe-Tuatahi | WHAKATURU | MCU RESET pine |
1. Ko te mana hiko mai i te papa tono e hono ana ki te ST-LINK/V2 patuiro me te papa kaupapa hei whakarite i te hototahi tohu i waenga i nga papa e rua.
2. BOOT0, UART-TX, me UART-RX kua rahuitia mo nga whanaketanga a meake nei.
Ko te TVCC, te SWIM, te GND, me te SWIM-RST ka taea te hono atu ki te hono iti 2.54 mm te utu, ki nga pane pine ranei kei runga i te papa i whakaritea.
4.2 Hononga me STM32
Mo te whakawhanaketanga o nga tono i runga i nga microcontrollers STM32, me hono te ST-LINK/V2 ki te tono ma te whakamahi i te paerewa 20-pin JTAG riipene papatahi kua whakaratohia.
Ko te ripa 4 e whakarāpopoto ana i ngā ingoa tohu, ngā mahi, me ngā tohu hononga ūnga o te 20-pin J paerewa.TAG rīpene papatahi ki ST-LINK/V2.
Ko te Ripanga 5 e whakarāpopoto ana i ngā ingoa tohu, ngā mahi, me ngā tohu hononga ūnga o te 20-titi J.TAG rīpene papatahi ki ST-LINK/V2-ISOL.
Ripanga 4. JTAGNga hononga taura SWD ki STLINK-V2
| Pin kahore. | ST-LINK/V2 tūhono (CN3) | ST-LINKN2 mahi | Hononga whainga (JTAG) | Hononga whainga (SWD) |
| 1 | VAPP | WCC whainga | MCU VDD(1) | MCU VDD(1) |
| 2 | ||||
| 3 | TRST | JTAG TRST | NJTRST | GND(2) |
| 4 | GND | GND | GNDK3) | GND(3) |
| 5 | TDI | JTAG TDO | JTDI | GND(2) |
| 6 | GND | GND | GND(3) | GND(3) |
| 7 | TMS SWIDIO | JTAG TMS, SW 10 | JTMS | SWIDIO |
| 8 | GND | GND | GND(3) | GND(3) |
| 9 | TCK SWCLK | JTAG TCK, SW CLK | JTCK | SWCLK |
| 10 | GND | GND | GND(3) | GND(3) |
| 11 | Kaore i hono | Kaore i hono | Kaore i hono | Kaore i hono |
| 12 | GND | GND | GND(3) | GND(3) |
| 13 | TDO SWO | JTAG TDI. SWO | JTDO | TRACESWOO) |
| 14 | GND | GND | GND(3) | GND(3) |
| 15 | NRST | NRST | NRST | NRST |
| 16 | GND | GND | GNDK3) | GND(3) |
| 17 | Kaore i hono | Kaore i hono | Kaore i hono | Kaore i hono |
| 18 | GND | GND | GND(3) | GND(3) |
| 19 | VDD | VDD (3.3 V) | Kaore i hono | Kaore i hono |
| 20 | GND | GND | GND(3) | GND(3) |
- Ko te hiko mai i te papa tono e hono ana ki te ST-LINK/V2 patuiro me te papahoa papaaho hei whakarite i te hototahi tohu i waenga i nga papa.
- Honoa ki te GND mo te whakaheke haruru i runga i te riipene.
- Me hono tetahi o enei titi ki te whenua mo te whanonga tika. E taunaki ana kia honoa katoa.
- Kōwhiringa: Mo te Waea Rangatū Viewer (SWV) tohu.
Ripanga 5. JTAGNga hononga taura SWD i runga i STLINK-V2-ISOL
| Pin no. | Tūhono ST-LINK/V2 (CN3) | Mahi ST-LINKN2 | Hononga whainga(JTAG) | Hononga ūnga (SWD) |
| 1 | VAPP | WCC whainga | MCU VDD(1) | MCU VDD(1) |
| 2 | ||||
| 3 | TRST | JTAG TRST | NJTRST | GND(2) |
| 4 | Kaore i hono | Kaore i hono | Kaore i hono | Kaore i hono |
| 5 | TDI | JTAG TDO | JTDI | GND(2) |
| 6 | Kaore i hono | Kaore i hono | Kaore i hono | Kaore i hono |
| 7 | TMS SWIDIO | JTAG TMS. SW 10 | JTMS | SWIDIO |
| 8 | Kaore i hono | Kaore i hono | Kaore i hono | Kaore i hono |
| 9 | TCK SWCLK | JTAG TCK, SW CLK | JTCK | SWCLK |
| 10 | Kāore i whakamahia(5) | Kāore i whakamahia(5) | Kāore i tūhono(5) | Kāore i tūhono(5) |
| 11 | Kaore i hono | Kaore i hono | Kaore i hono | Kaore i hono |
| 12 | GND | GND | GND(3) | GND(3) |
| 13 | TDO SWO | JTAG TDI, SWO | JTDO | TRACESW0(4) |
| 14 | Kāore i whakamahia(5) | Kāore i whakamahia(5) | Kāore i tūhono(5) | Kāore i tūhono(5) |
| 15 | NRST | NRST | NRST | NRST |
| 16 | Kaore i hono | Kaore i hono | Kaore i hono | Kaore i hono |
| 17 | Kaore i hono | Kaore i hono | Kaore i hono | Kaore i hono |
| 18 | GND | GND | GND(3) | GND(3) |
| 19 | Kaore i hono | Kaore i hono | Kaore i hono | Kaore i hono |
| 20 | GND | GND | GND(3) | GND(3) |
- Ko te hiko mai i te papa tono e hono ana ki te ST-LINK/V2 patuiro me te papahoa papaaho hei whakarite i te hototahi tohu i waenga i nga papa.
- Honoa ki te GND mo te whakaheke haruru i runga i te riipene.
- Me hono tetahi o enei titi ki te whenua mo te whanonga tika. E taunaki ana kia honoa katoa.
- Kōwhiringa: Mo te Waea Rangatū Viewer (SWV) tohu.
Ripanga 5. JTAGNga hononga taura SWD i runga i STLINK-V2-ISOL
| Pin no. | Tūhono ST-LINK/V2 (CN3) | Mahi ST-LINKN2 | Hononga whainga (JTAG) | Hononga ūnga (SWD) |
| 1 | VAPP | WCC whainga | MCU VDD(1) | MCU VDD(1) |
| 2 | ||||
| 3 | TRST | JTAG TRST | NJTRST | GND(2) |
| 4 | Kaore i hono | Kaore i hono | Kaore i hono | Kaore i hono |
| 5 | TDI | JTAG TDO | JTDI | GND(2) |
| 6 | Kaore i hono | Kaore i hono | Kaore i hono | Kaore i hono |
| 7 | TMS SWIDIO | JTAG TMS. SW 10 | JTMS | SWIDIO |
| 8 | Kaore i hono | Kaore i hono | Kaore i hono | Kaore i hono |
| 9 | TCK SWCLK | JTAG TCK. SW CLK | JTCK | SWCLK |
| 10 | Kāore i whakamahia(5) | Kāore i whakamahia(5) | Kāore i tūhono(5) | Kāore i tūhono(5) |
| 11 | Kaore i hono | Kaore i hono | Kaore i hono | Kaore i hono |
| 12 | GND | GND | GND(3) | GND(3) |
| 13 | TDO SWO | JTAG TDI. SWO | JTDO | TRACESW0(4) |
| 14 | Kāore i whakamahia(5) | Kāore i whakamahia(5) | Kāore i tūhono(5) | Kāore i tūhono(5) |
| 15 | NRST | NRST | NRST | NRST |
| 16 | Kaore i hono | Kaore i hono | Kaore i hono | Kaore i hono |
| 17 | Kaore i hono | Kaore i hono | Kaore i hono | Kaore i hono |
| 18 | GND | GND | GND(3) | GND(3) |
| 19 | Kaore i hono | Kaore i hono | Kaore i hono | Kaore i hono |
| 20 | GND | GND | GND(3) | GND(3) |
- Ko te hiko mai i te papa tono e hono ana ki te ST-LINK/V2 patuiro me te papahoa papaaho hei whakarite i te hototahi tohu i waenga i nga papa.
- Honoa ki te GND mo te whakaheke haruru i runga i te riipene.
- Me hono tetahi o enei titi ki te whenua mo te whanonga tika. E taunaki ana kia honoa katoa.
- Kōwhiringa: Mo te Waea Rangatū Viewer (SWV) tohu.
- I whakamahia e SWIM i runga i ST-LINK/V2-ISOL (tirohia te Ripanga 3).
Ko te Whakaaturanga 9 e whakaatu ana me pehea te hono i te ST-LINK/V2 ki tetahi whaainga ma te whakamahi i te JTAG taura.
- A = Papa tono whainga me JTAG tūhonohono
- B = JTAG/SWD 20-waea papatahi taura
- C = STM32 JTAG me te tūhono ūnga SWD
Ko te tohutoro mo te hononga hono e hiahiatia ana i runga i te papa tono whaainga ko: 2x10C pane takai 2x40C H3/9.5 (pitch 2.54) – HED20 SCOTT PHSD80.
Tuhipoka: Mo nga tono utu iti, ina he nui rawa te tapuwae hono 20-titi 2.54 mm-pitch paerewa, ka taea te whakamahi TAG-Tuhono otinga. Ko te TAG-Ko te urutau hono me te taura he huarahi ngawari me te pono mo te hono ST-LINK / V2, ST-LINK / V2ISOL ranei ki te PCB me te kore e hiahia ki te whakauru i te waahanga o te PCB tono.
Mo etahi atu korero mo tenei otinga me nga korero mo te tono-PCB-tapuwae, tirohia www.tag-hono.com.
Ko nga tohutoro o nga waahanga e hototahi ana ki te JTAG me nga atanga SWD ko:
a) TC2050-ARM2010 whāurutau (20-titi- ki te 10-titi-papa-atanga)
b) TC2050-IDC ranei TC2050-IDC-NL (Kaore he waewae) (10-titi taura)
c) TC2050-CLIP topenga pupuri mo te whakamahi me TC2050-IDC-NL (he kōwhiringa)
4.3 ST-LINK/V2 tūnga LED
Ko te LED kua tapaina ko COM kei runga ake o te ST-LINK/V2 e whakaatu ana i te mana ST-LINK/V2 (ahakoa te momo hononga). Taipitopito:
- Ka kimo te LED ki te whero: kei te whakahaerehia te tatauranga USB tuatahi me te PC
- He whero te LED: kua tau te whakawhitiwhiti korero i waenga i te PC me te ST-LINK/V2 (whakamutunga o te tatau)
- Ka kimo te LED i te matomato/whero: Ka whakawhitihia nga raraunga i waenga i te whaainga me te PC
- He matomato te LED: kua angitu te korero whakamutunga
- He karaka te LED: kua rahua te korero a ST-LINK/V2 me te whaainga.
Whirihoranga raupaparorohiko
5.1 ST-LINK/V2 whakamohoatanga mārō
Ko te ST-LINK/V2 he whakauru i tetahi tikanga whakamohoatanga mo te whakamohoatanga i roto i te waahi ma te tauranga USB. I te mea ka tipu te firmware i te wa e ora ana te hua ST-LINK/V2 (taumahinga hou, whakatika iro, tautoko mo nga whanau microcontroller hou), e taunaki ana kia toro atu ki nga wharangi kua whakatapua www.st.com kia mau tonu ki te putanga hou.
5.2 STM8 whanaketanga tono
Tirohia te huinga taputapu ST Pack24 me te papaki 1, he mea hou ake ranei, kei roto ko ST Visual Develop (STVD) me ST Visual Programmer (STVP).
5.3 STM32 te whakawhanaketanga tono me te kaupapa flash
Ko nga mekameka taputapu tuatoru (IAR ™ EWARM, Keil ® MDK-ARM ™ ) e tautoko ana i te ST-LINK/V2 e ai ki nga putanga i hoatu i te Ripa 6, i te putanga hou e waatea ana.
Ripanga 6. Me pehea te tautoko a nga mekameka taputapu tuatoru i a ST-LINK/V2
| Tuatoru | Te mekameka taputapu | Putanga |
| IAR™ | EWARM | 6.2 |
| Keil® | MDK-ARM™ | 4.2 |
Ko te ST-LINK/V2 e hiahia ana he taraiwa USB whakatapua. Ki te kore te tatūnga huinga taputapu e whakauru aunoa, ka kitea te taraiwa www.st.com i raro i te ingoa STSW-LINK009.
Mo etahi atu korero mo nga taputapu tuatoru, tirohia te whai ake webpae:
Ngā Mahere
Poutohu mo nga whakaahuatanga titi:
VDD = Putanga Putangatage tikanga
RARAUNGA = Kauhoe Raraunga Raraunga i waenga i te whaainga me te taputapu patuiro
GND = Whenua voltage
RESET = Te tautuhi i te punaha whaainga
Poutohu mo nga whakaahuatanga titi:
VDD = Putanga Putangatage tikanga
RARAUNGA = Kauhoe Raraunga Raraunga i waenga i te whaainga me te taputapu patuiro
GND = Whenua voltage
RESET = Te tautuhi i te punaha whaainga
Hītori arotakenga
Ripanga 7. Tuhinga o mua whakahounga
| Rā | Arotakenga | Huringa |
| 22-Aperira-11 | 1 | Tukunga tuatahi. |
| 3-Hune-11 | 2 | Ripanga 2: Kauhoe nga hononga rīpene papatahi mo ST-LINK/V2: tāpirihia te kīwae 1 ki te mahi "Target VCC". Ripanga 4: JTAG/ Hononga taura SWD: i tapirihia he kupuwaewae ki te mahi "Target VCC". Ripanga 5: Me pehea te tautoko a nga mekameka taputapu tuatoru ki a ST-LINK/V2: kua whakahoutia nga "Putanga" o IAR me Keil. |
| 19-Akuhata-11 | 3 | Kua taapirihia nga taipitopito taraiwa USB ki te Wāhanga 5.3. |
| 11-Mei-12 | 4 | Kua taapirihia te SWD me te SWV ki a JTAG āhuatanga hononga. Ripanga Whakakē 4: JTAG/ Hononga taura SWD. |
| 13-Hepetema-12 | 5 | Kua taapirihia te waehere tono ST-LINKN2-ISOL. Kua Whakahoutia te Wāhanga 4.1: Whakawhanake tono STM8 i te wharangi 15. Kua tapirihia te Tuhipoka 6 ki te Ripanga 4. He Panui taapiri "Mo nga tono utu iti..." i mua i te Wāhanga 3.3: STLINK/V2 tūnga LED i te wharangi 14. |
| 18-Oketopa-12 | 6 | Kua taapirihia te waahanga 5.1: ST-LINK/V2 whakamohoatanga firmware i te wharangi 15. |
| 25-Maehe-16 | 7 | Kua whakahoutia te uara VRMS i roto i te Kupu Whakataki me nga ahuatanga. |
| 18-Oketopa-18 | 8 | Ripanga 4 kua whakahoutia: JTAG/SWD nga hononga taura me ona tuhipoka. He iti nga whakarereketanga kuputuhi puta noa i te tuhinga katoa. |
| 9-Kohi-23 | 9 | Kua Whakahoutia te Whakataki, Nga ahuatanga, me te Wāhanga 5.3: Te whanaketanga tono STM32 me te kaupapa flash. Ripanga 5 kua whakahoutia: Me pehea te tautoko a nga mekameka taputapu tuatoru i a ST-LINK/V2. He iti nga whakarereketanga kuputuhi puta noa i te tuhinga katoa. |
| 3-Aperira-24 | 10 | Ripanga o mua 4 JTAG/SWD nga hononga taura i wehea i te Ripanga 4: JTAGNga hononga taura SWD ki STLINK-V2 me te Ripanga 5: JTAGNga hononga taura SWD i runga i STLINK-V2-ISOL. |
WHAKAMAHI WHAKAMAHI - KAUPAPA KAUPAPA
Ko te STMicroelectronics NV me ona apiti ("ST") te mana ki te whakarereke, whakatikatika, whakapainga, whakarereke me nga whakapainga ki nga hua ST me tenei tuhinga ranei i nga wa katoa kaore he panui. Me whiwhi nga kaihoko i nga korero hou e pa ana ki nga hua ST i mua i te tuku ota. Ka hokona nga hua ST i runga i nga tikanga me nga tikanga o te hokonga a ST i te wa o te ota whakaae. Ko nga Kaihoko anake te kawenga mo te kowhiringa, te kowhiringa me te whakamahi i nga hua ST me te ST karekau he kawenga mo te awhina tono me te hoahoa o nga hua a nga kaihoko.
Karekau he raihana, he mea whakaatu, he tohu ranei, ki tetahi mana taonga hinengaro ka tukuna e ST i konei.
Ko te hokonga ano o nga hua ST me nga tikanga rereke mai i nga korero kua whakatakotoria i konei ka whakakorehia he raihana kua tukuna e ST mo taua hua.
Ko te ST me te tohu ST he tohu tohu na ST. Mo etahi atu korero mo nga tohu hokohoko ST, tirohia www.st.com/marks. Ko etahi atu ingoa hua, ingoa ratonga ranei no ratou ake rangatira.
Ko nga korero kei roto i tenei tuhinga ka whakakapi me te whakakapi i nga korero i tukuna i mua i nga momo putanga o mua o tenei tuhinga.
© 2024 STMicroelectronics – Pūmau te mana
Tuhinga / Rauemi
 |
ST ST-LINK-V2 I roto i te Kaihanga Papatono Whakaoho [pdf] Pukapuka Kaiwhakamahi ST-LINK-V2, ST-LINK-V2-ISOL, ST-LINK-V2 I roto i te Kaihanga Kaihanga Kaihanga, ST-LINK-V2, I roto i te Kaihanga Kaihanga Kaihanga, i te Kaihanga Kaituku, i te Kaihanga Kaihanga. |