OVR JUMP Portable Jump Testing Device Manual

Set up the sender and receiver at least 4 feet apart. Turn both
units on. The receiver LEDs will light up green when the signal is
received. Stepping into the lasers will turn the LEDs red,
indicating the receiver is blocked.

fihetsika

Stand forward with one foot directly blocking the receiver for
accuracy. Avoid a wide centered stance to prevent missing the
tamin'ny laser.

fomba

Mode tsy tapaka: Use for testing vertical jump
haavony.
RSI Mode: For rebounding with a jump,
displaying jump height, ground contact time, and RSI.

GCT Mode: Measures ground contact time in the
laser area.

Fanontaniana matetika (FAQ)

Ahoana no hidirana amin'ny firafitry ny fitaovana?

To access the settings screen, long press both buttons and
release. Use the left button to scroll and the right button to
select. Settings are saved when turning off the device.

How do I change between operating modes?

In the settings, you can change between Regular, GCT, and RSI
modes by selecting the desired mode using the right button.

View Fullscreen

BOKY FAMPIASA

OVR Jump User Manual
Fizahan-takelaka
Loha Hevitra ato Anatiny………………………………………………………………………………………………………….. 1 Inona no ao anaty boaty?……………………………………………………………………………………………………………………. 1 Efa tapitra ny fitaovanaview……………………………………………………………………………………………………………………….2 Using OVR Jump……………………………………………………………………………………………………………………… 3
Setup………………………………………………………………………………………………………………………………………….. 3 Stance…………………………………………………………………………………………………………………………………………3 Modes………………………………………………………………………………………………………………………………………. 4 Button Functions………………………………………………………………………………………………………………………. 4 Settings……………………………………………………………………………………………………………………………………… 5 Screens Overview……………………………………………………………………………………………………………………. 5 Main Screen Details…………………………………………………………………………………………………………………. 7 Tether Mode………………………………………………………………………………………………………………………………7 Tethering OVR Jump’s Together………………………………………………………………………………………………..7 OVR Connect Setup………………………………………………………………………………………………………………….9 Specifications………………………………………………………………………………………………………………………… 10 Troubleshooting…………………………………………………………………………………………………………………….. 10 Frequently Asked Questions………………………………………………………………………………………………….. 11 Proper Use……………………………………………………………………………………………………………………………….11 Warranty…………………………………………………………………………………………………………………………………. 12 Support………………………………………………………………………………………………………………………………….. 12
Inona no ao anaty boaty?
1 – OVR Jump receiver 1 – OVR Jump sender 1 – Carry Bag 1 – Charging Cable
1

Efa tapitra ny fitaovanaview
Mpandray

OVR Jump User Manual

Slide Switch: Alefaso sy vonoy ny fitaovana

Seranan-tsambo USB-C:

Ampidiro ny fitaovana ary manavao ny firmware

Charging LED:

Green: fully charged Red: charging

Status LEDs: Buttons:

Green: Lasers received Red: Lasers blocked Scroll Jumps, change settings

Fampisehoana OLED: Fampisehoana angon-drakitra amin'ny fotoana tena izy

mpandefa

Slide Switch: Alefaso sy vonoy ny fitaovana

LED bateria:

Green: Battery Full Red: Battery Low

USB-C Port: Charge the device

Charging LED:

Green: fully charged Red: charging

OVR Jump User Manual
Mampiasa OVR Jump
Hametraka
Set up the sender and receiver as shown below. Ensure they are at least 4 feet apart.

OVR Jump dia mamoaka laser avy amin'ny mpandefa mankany amin'ny mpandray mba hamoronana sakana laser
With both units turned on and in position, the two LEDs on the receiver will light up green to indicate the signal is received. When stepping in the lasers, the LEDs will turn red, indicating the receiver is blocked.
fihetsika
It is recommended to stand forward and offset, so one foot is directly blocking the receiver. A wide centered stance has the potential to miss the lasers.

Most Accurate

Okay

Least Accurate

One foot directly blocking the lasers A wide stance may not block lasers

Most likely to be inaccurate

fomba
Fomba mahazatra

OVR Jump User Manual
Use regular mode for testing vertical jump height. The athlete must takeoff from the laser area and land in the laser area on landing. Upon landing the display will show the jump height in inches.

RSI Mode GCT Mode

Use RSI mode for dropping into the laser area and rebounding with a jump. The athlete must enter the laser area, and quickly jump, landing back in the landing area. This can be done with consecutive jumps.
Rehefa tonga ny fampiratiana dia hampiseho ny haavon'ny fitsambikinana, ny fotoana hifandraisana amin'ny tany ary ny mari-pamantarana mahery vaika (RSI).
Ampiasao ny fomba GCT handrefesana ny fotoana hifandraisana amin'ny tany amin'ny faritra laser. Apetraho eo amin'ny faritra mety ny laser, asaivo mifandray haingana amin'ny tany ny atleta rehefa manao fitsambikinana sy fanazaran-tena samihafa.
Rehefa miala amin'ny faritra laser, ny fampisehoana dia hampiseho ny fotoana fifandraisana amin'ny tany (GCT).

Button Functions

Bokotra havia Bokotra havanana Fanindry fohy Bokotra roa Tsindrio lava Bokotra roa (Settings) Bokotra havia (Settings) Bokotra havanana

Famerenana teo aloha Fiverenana manaraka Avereno ny angona Firafitry ny fitaovana Afindrao ny mpifidy

OVR Jump User Manual

Fikirana
To get to the device settings screen, long press both buttons and release. Use the left button to scroll, and the right button to select. All settings are saved when turning the device off.

Mode

Change between the three operating modes (Regular, GCT, RSI).

RSI View Tether Channel
Timer Units

Rehefa ao amin'ny fomba RSI dia ovay ny sanda izay eo amin'ny toerana voalohany. Safidio ny haavon'ny hitsambikina, RSI, na GCT.
Alefaso ny maody tether, ary tendreo ho fitaovana an-trano na fitaovana mifandray ilay vondrona.
Choose the channel for tether mode. Make sure the home and link are on the same channel. When using multiple sets of tethered Jumps, use different channels.
Enable or disable the rest timer on the top of the screen. This timer resets when a new jump is completed.
Choose whether jump height should be in inches or centimeters.

Screens Overview

Loading Screen
Device loading screen. Battery level in bottom right corner.

Efijery lehibe
Vonona handrefesana hitsambikina.
5

OVR Jump User Manual
Fomba mahazatra
Mampiasà fomba mahazatra amin'ny fitsapana mitsambikina mitsangana.
RSI Mode
Use RSI mode to measure jump height, GCT, and calculate the corresponding RSI.
Fomba GCT
Ampiasao ny maody GCT handrefesana ny fotoana hifandraisana amin'ny tany.
Fikirana
Ovay ny fandrindrana ny fitaovana. Jereo ny fizarana firafitry ny antsipiriany momba ny safidy tsirairay.
Fanamarihana: ny ID fitaovana dia eo amin'ny zoro havanana ambony (OVR Connect)
6

Tsipirian'ny efijery lehibe

MPISAVA

RSI

OVR Jump User Manual GCT

Jump Height RSI (Reactive Strength Index) GCT (Ground Contact Time) Current Jump

Total Jumps Rest Timer Tether Mode (if active) Tether Channel (if active)

Tether Mode
Tether mode is a great way to improve the abilities of your OVR Jump. When enabled, connect up to 5 OVR Jump’s side by side, extending the laser area to ensure the athlete doesn’t land outside the lasers.
Tethering OVR Jump's Together
Step 1: Turn on two OVR Jump receivers and navigate to the settings. Step 2 (Home): The first device will act as the “home” unit, the primary device.
1. Change the “Tether” setting to “Home”, and note the channel 2. Exit the settings (device will reset in home mode)

Tether Settings

Main view with tether icons 7

OVR Jump User Manual
Step 3 (Link): The second device will act as the “link” unit, the secondary device. 1. Change the “Tether” setting to “Link”, and use the same channel as the home unit 2. Exit the settings (device will reset in link mode)

Tether Settings

Rohy lehibe view with tether icons

Tether Link Screen Peripherals Bottom Left Corner Tether Channel (1-10) Bottom Right Corner Connection Status

Step 4: Connect the home and link units side by side with the hidden magnets and set up the sender to point lasers into both receivers. You can now use two receivers as one big receiver, doubling (or even tripling) the laser barrier width. Repeat Step 3 for additional units.

Tether Notes: To tether subsequent receivers, complete step 3 with additional receivers Only one sender should be used. Place the sender further away for tethered setups For multiple tethered setups in a gym, ensure the channels for each setup are unique Only the home unit can connect to the app, control all settings etc. The linked unit will show a checkmark or X in the bottom right corner to confirm if it is connected to a home device
8

OVR Jump User Manual

OVR Connect Setup

Step 1: Turn on your OVR Jump
Step 2: Open OVR Connect and tap the connect icon

Step 3: Wait for the OVR Jump to appear

Dingana 4: Tsindrio ny fitaovanao mba hifandraisana

Once connected, a link icon will appear on the display
Link icon indicating OVR Connect is linked
OVR Connect
View angona mivantana ho an'ny tamberina avy hatrany
Jereo ny angona ary manara-maso ny fivoaran'ny fotoana
Mizara data amin'ny media sosialy
9

OVR Jump User Manual

fepetra arahana

Receiver Dimensions: 18.1 x 1.8 x 1.3 (in) 461 x 46 x 32 (mm)

Lanja mpandray:

543g / 1.2lb

Fiainana bateria:

2000mAh (Rec: 12hr, Sender: 20hr)

Haben'ny mpandefa:
Sender Weight: Materials:

6.4 x 1.8 x 1.3 (in) 164 x 46 x 32 (mm) 197g / 0.43lb Aluminum, ABS

Fanamboarana

Tsy mi-charge ny fitaovana

– Check if charging LED is lighting up – Use provided charging cable. Do not use other
USB-C chargers like those made for laptops.

Lasers aren’t being picked up by receiver

– Ensure sender is on and has battery – Ensure sender is pointed towards the receiver,
at least 4 feet away – Ensure nothing is blocking the receiver

– Green Status LEDs (Receiver) – Lasers received
– Red Status LEDs (Receiver) – Lasers blocked / not found

Tsy voarakitra an-tsoratra ny jumps

– Ensure tether mode is not set to “Link” – Ensure the jump is at least 6″ or ground
contact time is less than 1 second

Tether mode not working

– Ensure the devices are set up exactly as shown in the tether mode instructions
– Ensure the home and link units are on the same channel
– Check if the status LEDs of home unit go from green to red when blocking the linked unit

Tsy mifandray amin'ny OVR Connect ny fitaovana

– Ensure tether mode is not set to “Link” – Ensure your mobile phone’s BT is turned on – Turn the OVR Jump off and on to reset – Is a linked icon showing up on the display?

Raha mila famahana olana hafa, mifandraisa aminay amin'ny alàlan'ny anay website.

OVR Jump User Manual

Fanontaniana matetika

Do you need the app to use the device? How accurate is OVR Jump?

No, OVR Jump is a stand alone unit that provides all your rep data right from the onboard display. While the app extends to benefits, it is not required for use. OVR Jump reads the lasers 1000 times per second to ensure accuracy and consistency.

Misy fetra mitsambikina ve?

Rehefa vita ny fitsambikinana 100 dia hamerina ny angon-drakitra ao anaty sambo ilay fitaovana ary hanohy ny firaketana hitsambikina manomboka amin'ny aotra.

What is the minimum jump height? How does OVR Jump work?
Ilaina ve ny OVR Connect mba hampifandray ireo mpandray

Ny haavon'ny hitsambikina ambany indrindra dia 6 santimetatra.
OVR Jump uses invisible lasers to detect when an athlete is on the ground or in the air. This provides the most consistent method of measuring jump height. No, OVR Jump has the ability to tether together without the app, ensuring the connection is fast and stable.

How many tethering channels Tether mode has 10 channels to allow for multiple sets

are there

of receivers to work in the same area.

Fampiasana mety
Mba hiantohana ny fampandehanana tsara indrindra sy ny faharetan'ny fitaovana OVR Jump anao dia zava-dehibe ny manaraka ireto torolàlana manaraka ireto mba hampiasana araka ny tokony ho izy. Ny fanitsakitsahana ireo fepetra ireo dia ho andraikitry ny mpanjifa, ary ny OVR Performance dia tsy tompon'andraikitra amin'ny fahasimbana rehetra vokatry ny fampiasana tsy mety, izay mety hanafoana ny fiantohana ihany koa.
Temperature sy ny fiposahan'ny masoandro: Fadio ny mametraka ny fitaovana amin'ny hafanana ambony na ny tara-masoandro mivantana maharitra. Ny hafanana tafahoatra sy ny taratra UV dia mety hanimba ny singa ao amin'ilay fitaovana ary hisy fiantraikany amin'ny asany.
Fitantanana ny bateria: Mba hanalava ny androm-piainan'ny batterie, ialao ny fandaniana tanteraka ny bateria. Asio tsy tapaka ny fitaovana mba tsy hidina ho aotra ny haavon'ny bateria mandritra ny fotoana maharitra.
Placement of the Devices: Position the devices in a location where it is not at risk of being hit by gym equipment. Do not land on the devices. Physical impacts can cause significant damage to the device.

OVR Jump User Manual
Garantie
Limited One-Year Warranty for OVR Jump OVR Performance LLC provides a Limited One-Year Warranty for the OVR Jump device. This warranty covers defects in materials and workmanship under proper use, for one year from the date of purchase by the original end-user. What is Covered:
Fanamboarana na fanoloana kojakoja hita fa simba noho ny fitaovana na ny asa.
What is Not Covered: Damage caused by misuse, accidents, or unauthorized repairs/modifications. Normal wear and tear or cosmetic damage. Use with non-OVR Performance products or in ways not intended by the manufacturer.
How to Obtain Service: For warranty service, the product must be returned to the specified location by OVR Performance, ideally in its original packaging or packaging of equal protection. Proof of purchase is required. Limitation of Damages: OVR Performance is not responsible for indirect, incidental, or consequential damages resulting from any breach of warranty or proper use.
MANAMPY
If you require assistance with your OVR Jump device or have any questions, our support team is here to help. For all support-related inquiries, please contact us through www.ovrperformance.com.
12

Documents / Loharano

OVR JUMP Portable Jump Testing Device [pdf] Boky Torolàlana
Portable Jump Testing Device, Jump Testing Device, Testing Device

References

User Manual

OVR JUMP Portable Jump Testing Device Manual

Fitaovan'ny fitiliana fitsambikina portable

fepetra arahana

Torolàlana momba ny fampiasana vokatra

Efa tapitra ny fitaovanaview

Mampiasa OVR Jump

Hametraka

fihetsika

fomba

Fanontaniana matetika (FAQ)

Ahoana no hidirana amin'ny firafitry ny fitaovana?

How do I change between operating modes?

Documents / Loharano

References

Mametraha hevitra

Foana ny valiny