VERA DREAM BED ASSEMBLY INSTRUCTION
Vendor Information
Vendor Name: LIVING SPACES
Vendor Code: LSMX1
Living Space Information:
Vendor Collection: VERA DREAM NON STORAGE
Main Components
| ITEM | DESCRIPTION | QUANTITY |
|---|---|---|
| 1 | VERA DREAM HEADBOARD | 1 |
| 2 | VERA DREAM RAILS/SLATS | 1 |
| 3 | VERA DREAM FOOTBOARD | 1 |
Hardware
Hardware bag included in side rails and slat box with red ribbon to locate.
Hardware Components:
- A (x8): 5/16-18X1" SCREW BUTTON HEAD CAP
- B (x8): WASHER 5/16 PLAIN
- C (x2): 3/16 SHORT ARM HEX KEY
- D (x2): 5/16-18X1 1/2" SCREW BUTTON HEAD CAP [REPLACEMENT]
Assembly Steps
STEP 1: Attach side rails to headboard
Attach side rails (2) to the headboard (1) using Wrench (C), 4 Screws (A) and Washers (B).
Diagram Description: Shows the headboard upright, with side rails being attached to its sides using screws and washers. The hardware bag is indicated.
STEP 2: Attach Footboard to side rails
Attach the footboard (3) to the side rails (2) using Wrench (C), 4 Screws (A) and Washer (B).
Diagram Description: Shows the partially assembled bed frame (headboard and side rails) with the footboard being attached to the open ends of the side rails using screws and washers.
STEP 3: Attach support legs to center slat
Attach the support legs with leveler to the center slat. Adjust the levers on bottom of support legs when necessary.
Diagram Description: Shows a long center slat with several support legs being attached to its underside. The legs have adjustable levelers.
STEP 4: Place center slat assembly
Place the center slat assembly from top to bottom into the U-shaped slot on the headboard and footboard.
Diagram Description: Illustrates the center slat with attached legs being inserted into the U-shaped grooves on the inside of the headboard and footboard. The text indicates quantities of support legs for different bed sizes: CENTER QUEEN BED - 1 QTY (5 Support legs), CENTER CK BED - 1 QTY (5 Support legs), CENTER EK BED - 2 QTY (10 Support legs).
STEP 5: Unroll slats
Unroll the slats onto the center slat, starting at the footboard and ending at the headboard.
Diagram Description: Shows the wooden slats being unrolled across the bed frame, resting on the center slat and the side rails.
STEP 6: Verify slat installation
Verify the slats are installed properly and the legs are perpendicular to the floor for full support.
Diagram Description: Shows a side view of the assembled bed frame with slats in place, indicating that the support legs should be perpendicular to the floor for stability.
[Estimated time: 30 minutes]
