Vera Dream Bed Assembly Instructions

Vendor Name: LSMX1

Vendor Code: V-005852

Vendor Collection: VERA DREAM NON STORAGE / VERA DREAM

Non-Storage Bed Assembly

Items:

1 x VERA DREAM HEADBOARD
1 x VERA DREAM RAILS/SLATS
1 x VERA DREAM FOOTBOARD

STEP 1: Attach side rails to headboard

Use Wrench (E), 4 Screws (A), and Washers (C).

Diagram shows side rails connecting to the headboard with screws and washers.

STEP 2: Attach Footboard to side rails

Use Wrench (E), 4 Screws (A), and Washers (C).

Diagram shows the footboard connecting to the side rails with screws and washers.

STEP 3: Attach support legs with leveler to the center slat

Adjust the levers on the bottom of the support legs as necessary. Turn right, only use the hand.

Support Leg Quantity:

CENTER QUEEN BED: 1 QTY (5 Support legs)
CENTER CK BED: 1 QTY (5 Support legs)
CENTER EK BED: 2 QTY (10 Support legs)

Diagram shows support legs being attached to a center slat.

STEP 4: Place the piece from top to bottom into the U-shaped slot.

Diagram illustrates placing a component into a U-shaped slot.

STEP 5: Unroll the slats onto the center slat

Start at the footboard and end at the headboard.

Diagram shows slats being unrolled onto the center support.

STEP 6: Verify the slats are installed properly

Ensure the legs are perpendicular to the floor for full support.

Diagram shows the completed bed frame with slats properly installed.

Vera Dream Bed with Wings Assembly

Items:

2 x VERA DREAM WINGS

Hardware Bag Contents:

A: SLOT BRACKET (x2)
B: CORNER BRACKET (x2)
C: 5/16-18X1-1/4" SCREW BUTTON HEAD CAP (x8)
D: WASHER 5/16 PLAIN (x8)
E: 3/16 SHORT ARM HEX KEY (x2)

STEP 7: Loosen the screw (C)

Use wrench (E) and turn counterclockwise.

Diagram shows a screw being loosened counterclockwise.

STEP 8: Turn a plate clockwise and one counterclockwise.

Diagram illustrates turning plates in opposite directions.

STEP 9: Tighten the screw (C)

Use wrench (E) and turn following the direction of the hands of a clock (clockwise).

Diagram shows a screw being tightened clockwise.

STEP 10: Attach brackets (A & B) to the wings

Attach in the holes on the back and under the wings using wrench (E), screws (C), and flat washers (D), following the direction of the clock.

Diagram shows brackets being attached to the wings with screws and washers.

STEP 11: Raise bed to put inside the side rail of wing bracket

Diagram shows the bed being raised to align with the wing bracket on the side rail.

Diagram illustrates aligning the bed with the wing bracket.

STEP 12: Attach bracket (A) to headboard

Use wrench (E), 4 screws (C), and flat washers (D), following the direction of the hands of a clock.

Diagram shows bracket A being attached to the headboard with screws and washers.

	Vera Dream Bed Assembly Instructions - Living Spaces Step-by-step assembly guide for the Vera Dream Bed by Living Spaces. Includes parts list, hardware details, and instructions for assembling the headboard, footboard, rails, slats, and support legs. Estimated assembly time: 30 minutes.
	Vera Dream Storage Bed and Wings Assembly Instructions Comprehensive assembly guide for the Living Spaces Vera Dream Storage Bed and Vera Dream Wings. Includes detailed steps, parts lists, and hardware information for a smooth setup.
	Vera Dream Bed Assembly Instructions \| Living Spaces Detailed assembly guide for the Vera Dream Bed and Vera Dream Wings from Living Spaces, including parts lists, hardware, and step-by-step instructions for a complete setup.
	Vera Dream Storage Bed and Wings Assembly Instructions \| Living Spaces Comprehensive assembly instructions for the Vera Dream Storage Bed and Vera Dream Wings by Living Spaces. Includes parts list, hardware details, and step-by-step guidance for a smooth setup.
	Vera Dream Bed and Wings Assembly Instructions \| Living Spaces Comprehensive assembly guide for the Living Spaces Vera Dream Bed and optional Vera Dream Wings. Includes detailed steps, parts lists, and hardware information for a smooth setup.
	Vera Dream Storage Bed Assembly Instructions Comprehensive assembly guide for the Living Spaces Vera Dream Storage Bed and optional Wings, detailing parts, hardware, and step-by-step instructions for a successful setup.
	Vera Dream Storage Bed Assembly Instructions Step-by-step assembly instructions for the Vera Dream Storage Bed, including parts list, hardware details, and assembly diagrams.
	Vera Dream Storage Bed Assembly Instructions Step-by-step assembly guide for the Vera Dream Storage Bed, including parts list, hardware, and detailed instructions for attaching headboard, footboard, rails, slats, and wings.