VERA DREAM BED ASSEMBLY INSTRUCTIONS
Vendor Information
Vendor Name: LSMX1
Vendor Code: V-005852
Living Space Information
Vendor Collection: VERA DREAM
Parts List
- ITEM 1: VERA DREAM HEADBOARD (Quantity: 1)
- ITEM 2: VERA DREAM RAILS/SLATS (Quantity: 1 set)
- ITEM 3: VERA DREAM FOOTBOARD (Quantity: 1)
Hardware
Hardware bag included behind the headboard with red ribbon.
- A: 5/16-18X1" SCREW BUTTON HEAD CAP (Quantity: 8)
- B: WASHER 5/16 PLAIN (Quantity: 8)
- C: 3/16 SHORT ARM HEX KEY (Quantity: 2)
Assembly Steps
STEP 1: Attach side rails to headboard
Attach the two side rails (ITEM 2) to the VERA DREAM HEADBOARD (ITEM 1) using four Screws (A) and four Washers (B). Tighten using the 3/16 SHORT ARM HEX KEY (C).
Visual Aid Description: The diagram shows the headboard upright, with side rails being connected to its sides. Screws and washers are depicted being inserted through the rails into the headboard. The hex key is shown for tightening.
STEP 2: Attach Footboard to side rails
Attach the VERA DREAM FOOTBOARD (ITEM 3) to the ends of the side rails (ITEM 2) using four Screws (A) and four Washers (B). Tighten using the 3/16 SHORT ARM HEX KEY (C).
Visual Aid Description: The diagram shows the footboard being connected to the other ends of the side rails. Screws and washers are depicted being inserted through the rails into the footboard. The hex key is shown for tightening.
STEP 3: Attach support legs to center slat
Attach the support legs, which include levelers, to the center slat (part of ITEM 2). Adjust the levers on the bottom of the support legs as necessary for leveling. Text on diagram indicates "TURN RIGHT ONLY USE THE HAND".
Visual Aid Description: The diagram illustrates attaching multiple support legs to a long center slat. The legs have adjustable feet (levelers). An instruction to turn right and use only the hand is noted.
STEP 4: Position assembled frame
Place the assembled bed frame (headboard, footboard, and side rails) onto the U-shaped slots of the headboard and footboard. Ensure the center slat assembly is correctly positioned.
Visual Aid Description: The diagram shows the main frame components being fitted together, likely connecting the side rails to the headboard and footboard via U-shaped slots. The center slat assembly is also shown being placed.
STEP 5: Unroll slats
Unroll the individual slats (part of ITEM 2) onto the center slat assembly. Start unrolling from the footboard end and proceed towards the headboard end.
Visual Aid Description: The diagram shows a bundle of slats being unrolled across the bed frame, resting on the center support structure.
STEP 6: Verify installation
Verify that all slats are installed correctly. Ensure the support legs are perpendicular to the floor to provide full support and stability.
Visual Aid Description: A side profile view of the assembled bed shows the legs standing straight and perpendicular to the floor, indicating proper installation for stability.
