VERA DREAM STORAGE BED ASSEMBLY INSTRUCTION
Vendor: LSMX1 | Vendor Code: V-005852
Collection: VERA DREAM STORAGE
Parts List
| Item | Description | Quantity |
|---|---|---|
| 1 | VERA DREAM HEADBOARD | 1 Piece |
| 2 | VERA DREAM RAILS/SLATS | 1 Kit |
| 3 | VERA DREAM FOOTBOARD WITH DRAWERS | 1 Kit |
| A | FOOTBOARD | 1 |
| B | DRAWER | 2 |
| C | Screw for flat head Allen wrench 5/16" x 1 5/8" | 8 |
| D | 3/16 Short Arm Hex Key | 1 |
Hardware
Hardware bag included in side rails and slat box with red ribbon to locate.
- Screw: 5/16-18 x 1" Button Head Cap (x8)
- Washer: 5/16 Plain (x8)
- Hex Key: 3/16 Short Arm (x2)
- Screw: 5/16-18 x 1 1/2" Button Head Cap (x2)
Assembly Steps
Step 1: Attach Side Rails to Headboard
Attach the side rails (2) to the headboard (1) using four 5/16-18 x 1" Button Head Cap Screws (A) and four 5/16" Plain Washers (B). Use the 3/16 Short Arm Hex Key (C) for tightening.
[Diagram: Shows headboard, side rails, screws, washers, and hex key connecting them.]
Step 2: Attach Slats to Side Rails
Attach the 'L' shaped slats (2) to the side rails using two 5/16-18 x 1" Button Head Cap Screws (A) and two 5/16" Plain Washers (B). Estimated assembly time: 45 seconds.
[Diagram: Shows slats being attached to side rails with screws and washers.]
Step 3: Attach Support Legs to Center Slat
Attach the support legs with integrated levelers to the center slat. Adjust the levelers on the bottom of the legs as needed for stability. Turn the legs to the right for attachment.
[Diagram: Shows center slat with support legs being attached, with an indication to turn right.]
Step 4: Insert Center Support into Headboard
Insert the assembled center support structure (with legs attached) into the U-shaped slots located on the headboard.
[Diagram: Shows the center support piece being inserted into the headboard's U-shaped slots.]
Step 5: Secure Center Slat
Secure the 'L' shaped center slat to the side rail using one 5/16-18 x 1 1/2" Button Head Cap Screw (D) and one 5/16" Plain Washer (B). Use the 3/16 Short Arm Hex Key (C) for tightening.
[Diagram: Close-up view of securing the center slat to the side rail.]
Step 6: Insert Footboard Storage Assembly
Slide the footboard storage assembly, which contains the drawers, into the main bed frame as illustrated.
[Diagram: Shows the footboard with drawers being slid into the bed frame.]
Step 7: Unroll Slats
Unroll the remaining slats (3) starting from the footboard and extending them to the headboard, resting them on the center support slat.
[Diagram: Shows slats being unrolled across the bed frame.]
Step 8: Verify Installation
Ensure all slats are correctly positioned and perpendicular to the floor to provide full support for the mattress. The bed should be stable.
[Diagram: Shows the completed bed frame with slats and drawers, indicating proper alignment and stability.]
