Vera Dream Storage Bed and Wings Assembly Instructions
Vendor: Living Spaces
Vendor Code: V-005852
Product Collection: Vera Dream Storage / Vera Dream
Parts List
| Item | Description | Quantity |
|---|---|---|
| 1 | VERA DREAM HEADBOARD | 1 PIECE |
| 2 | VERA DREAM RAILS/SLATS | 1 KIT |
| 3 | VERA DREAM FOOTBOARD | 1 PIECE |
| 4 | VERA DREAM DRAWERS | 1 KIT |
| 1 | VERA DREAM WINGS | 2 |
Hardware
For Bed Assembly:
| Item | Description | Quantity |
|---|---|---|
| A | 5/16-18X1" SCREW BUTTON HEAD CAP | X8 |
| B | WASHER 5/16 PLAIN | X8 |
| C | 3/16 SHORT ARM HEX KEY | X2 |
| D | 5/16-18X 1 1/2" SCREW BUTTON HEAD CAP | X2 |
For Footboard/Drawer Assembly (Page 4):
| Item | Description | Quantity |
|---|---|---|
| C | TORNILLO PARA LLAVE ALLEN CABEZA PLANA 5/16" X 1 5/8" (Screw for flat head Allen wrench) | 8 |
| D | 3/16 SHORT ARM HEX KEY | 1 |
For Wings Assembly:
| Item | Description | Quantity |
|---|---|---|
| A | SLOT BRACKET | X2 |
| B | CORNER BRACKET | X2 |
| C | 5/16-18X1-1/4" SCREW BUTTON HEAD CAP | X8 |
| D | WASHER 5/16 PLAIN | X8 |
| E | 3/16 SHORT ARM HEX KEY | X2 |
Storage Bed Assembly
Estimated assembly time: [45 minutes]
Step 1: Attach Side Rails to Headboard
Attach the two side rails (2) to the headboard (1) using four screws (A) and four washers (B). Tighten securely with the hex key (C).
Step 2: Attach Center Slat
Attach the "L" shaped slat (3) to the side rails (2) using two screws (A) and two washers (B). Tighten with the hex key (C).
Step 3: Install Support Legs
Attach the support legs with integrated levelers to the center slat. Adjust the levelers on the bottom of the support legs as needed for stability.
Step 4: Position Central Support
Place the central support structure into the U-shaped slot on the bed frame.
Step 5: Secure Center Slat
Secure the center slat to the "L" shaped slat using one screw (D) and one washer (B), tightened with the hex key (C).
Step 6: Install Footboard and Drawers
Insert the footboard storage assembly, containing the drawers, into the main bed frame.
Step 7: Unroll Slats
Unroll the remaining slats (2) across the bed frame, starting from the footboard end and extending to the headboard end.
Step 8: Final Verification
Verify that all slats are correctly positioned and that the support legs are perpendicular to the floor to ensure full and proper support.
Wings Assembly
Estimated assembly time: [30 minutes]
Steps 1-3: Prepare Wing Brackets
Loosen screw (C) using wrench (E) counterclockwise. Turn a plate clockwise and then counterclockwise. Tighten screw (C) with wrench (E) clockwise.
Step 4: Attach Brackets to Wings
Attach slot brackets (A) and corner brackets (B) to the back and underside of the wings. Use wrench (E), screws (C), and washers (D) for attachment.
Step 5: Mount Wings to Bed
Raise the assembled bed frame. Position the side rail of the wing bracket into the corresponding slot on the bed frame.
Step 6: Secure Wings to Headboard
Attach the bracket (A) to the headboard using wrench (E), four screws (C), and four flat washers (D).
