VERA DREAM BED ASSEMBLY INSTRUCTIONS

Vendor: Living Spaces

Vendor Name: LSMX1 | Vendor Code: V-005852 | Vendor Collection: VERA DREAM

Product Information

ITEM	DESCRIPTION	QUANTITY
1	VERA DREAM HEADBOARD	1
2	VERA DREAM RAILS/SLATS	1
3	VERA DREAM FOOTBOARD	1

Hardware Included

Identifier	Description	Quantity
A	5/16-18X1" SCREW BUTTON HEAD CAP	8
B	WASHER 5/16 PLAIN	8
C	3/16 SHORT ARM HEX KEY	2

Hardware bag included behind the headboard with red ribbon to locate.

Assembly Steps

STEP 1: Attach side rails to headboard

Attach the two VERA DREAM RAILS/SLATS (2) to the VERA DREAM HEADBOARD (1) using four Screws (A) and four Washers (B). Tighten using the Hex Key (C).

Visual Description: The diagram shows the headboard standing upright. The side rails are positioned to connect to the sides of the headboard. Screws and washers are shown being inserted, and the hex key is depicted for tightening. A "HARDWARE BAG" is indicated.

STEP 2: Attach footboard to side rails

Attach the VERA DREAM FOOTBOARD (3) to the ends of the VERA DREAM RAILS/SLATS (2) using four Screws (A) and four Washers (B). Tighten using the Hex Key (C).

Visual Description: The diagram shows the partially assembled bed frame (headboard and rails). The footboard is positioned to connect to the open ends of the side rails. Screws and washers are shown being inserted, and the hex key is depicted for tightening.

STEP 3: Attach support legs to center slat

Attach the support legs with levelers to the center slat. Adjust the levers on the bottom of the support legs as necessary. For adjustment, turn the leveler right. Use hand only.

Visual Description: The diagram illustrates attaching the support legs to the center slat. Arrows indicate the direction for adjusting the levelers ("TURN RIGHT").

STEP 4: Place center slat assembly into U-shaped slot

Place the center slat assembly (with attached support legs) from top to bottom into the U-shaped slot on the bed frame.

Visual Description: The diagram shows the assembled bed frame with a U-shaped slot. The center slat assembly is depicted being lowered into this slot.

STEP 5: Unroll slats onto center slat

Unroll the remaining slats onto the center slat, starting at the footboard end and ending at the headboard.

Visual Description: The diagram shows the bundle of slats being unrolled and laid across the bed frame, resting on the center slat and side rails.

STEP 6: Verify slat installation

Verify that the slats are installed properly and the support legs are perpendicular to the floor for full support.

Visual Description: A side view of the completed bed is shown, highlighting the slats and support legs. The diagram indicates that the legs should be vertical (perpendicular to the floor) to ensure proper support.

Estimated Assembly Time: 30 minutes ⏱️

Recommended: 1 Person ?

	Vera Dream Storage Bed and Wings Assembly Instructions \| Living Spaces Comprehensive assembly instructions for the Vera Dream Storage Bed and Vera Dream Wings by Living Spaces. Includes parts list, hardware details, and step-by-step guidance for a smooth setup.
	Vera Dream Bed Assembly Instructions \| Living Spaces Detailed assembly guide for the Vera Dream Bed and Vera Dream Wings from Living Spaces, including parts lists, hardware, and step-by-step instructions for a complete setup.
	Vera Dream Bed Assembly Guide \| Living Spaces Assemble your Vera Dream Bed with this comprehensive guide from Living Spaces. Find parts, hardware, and clear, step-by-step instructions for easy furniture assembly.
	Vera Dream Bed Assembly Instructions \| Living Spaces Step-by-step guide to assembling the Vera Dream Bed from Living Spaces. Includes parts list, hardware details, and textual descriptions of diagrams for easy setup.
	Vera Dream Storage Bed Assembly Instructions Comprehensive assembly guide for the Living Spaces Vera Dream Storage Bed and optional Wings, detailing parts, hardware, and step-by-step instructions for a successful setup.
	VERA DREAM BED Assembly Instructions Detailed assembly instructions for the VERA DREAM BED by Living Spaces, including parts list, hardware, and step-by-step guidance for a smooth setup.
	Vera Dream Bed and Wings Assembly Instructions \| Living Spaces Comprehensive assembly guide for the Living Spaces Vera Dream Bed and optional Vera Dream Wings. Includes detailed steps, parts lists, and hardware information for a smooth setup.
	Vera Dream Bed Assembly Instructions - Living Spaces Step-by-step assembly guide for the Vera Dream Bed by Living Spaces. Includes parts list, hardware details, and instructions for assembling the headboard, footboard, rails, slats, and support legs. Estimated assembly time: 30 minutes.