ZEBRA TC2 Series Touch Mobile Computer Jagora Jagora

TC2 Series Touch Mobile Computer

TC22/TC27
Tada Komfuta

Jagoran Fara Mai Sauri

MN-004729-04EN Rev A

Haƙƙin mallaka

2024/07/16

ZEBRA da mai salo shugaban Zebra alamun kasuwanci ne na Zebra Technologies Corporation, masu rijista a yankuna da yawa a duniya. Duk sauran alamun kasuwanci mallakin masu su ne. ©2024 Zebra Technologies Corporation da/ko masu haɗin gwiwa. An kiyaye duk haƙƙoƙi.

Bayani a cikin wannan takarda yana iya canzawa ba tare da sanarwa ba. An samar da software ɗin da aka siffanta a cikin wannan takaddar ƙarƙashin yarjejeniyar lasisi ko yarjejeniyar rashin bayyanawa. Ana iya amfani da software ko kwafi kawai bisa ga sharuɗɗan yarjejeniyar.

Don ƙarin bayani game da bayanan doka da na mallaka, da fatan za a je:

SOFTWARE: zebra.com/informationpolicy.
Hakkin mallaka: zebra.com/copyright.
PATENTS: ip.zebra.com.
GARANTI: zebra.com/warranty.
KARSHEN YARJENIN LASIN MAI AMFANI: zebra.com/eula.

Sharuɗɗan Amfani

Bayanin Mallaka

Wannan littafin ya ƙunshi bayanan mallakar Zebra Technologies Corporation da rassansa ("Zebra Technologies"). An yi niyya ne kawai don bayanai da amfani da ƙungiyoyi masu aiki da kiyaye kayan aikin da aka bayyana a nan. Ba za a iya amfani da irin waɗannan bayanan mallakar mallaka ba, sake bugawa, ko bayyanawa ga kowace ƙungiya don kowane dalili ba tare da takamaiman, rubutacciyar izinin Zebra Technologies ba.

Ingantaccen Samfur

Ci gaba da haɓaka samfuran manufofin Zebra Technologies ne. Duk ƙayyadaddun bayanai da ƙira suna ƙarƙashin canzawa ba tare da sanarwa ba.

Laifin Laifi

Zebra Technologies yana ɗaukar matakai don tabbatar da cewa ƙayyadaddun ƙayyadaddun Injiniya da littattafan da aka buga daidai suke; duk da haka, kurakurai suna faruwa. Zebra Technologies tana da haƙƙin gyara kowane irin wannan kurakurai da ƙin yarda da abin da ya biyo baya.

Iyakance Alhaki

Babu wani yanayi da Zebra Technologies ko duk wani wanda ke da hannu a ƙirƙira, samarwa, ko isar da samfur ɗin (ciki har da kayan masarufi da software) ba za su zama abin dogaro ga kowace lahani ba (ciki har da, ba tare da iyakancewa ba, lahani mai lalacewa gami da asarar ribar kasuwanci, katsewar kasuwanci). , ko asarar bayanan kasuwanci) tasowa daga amfani da, sakamakon amfani, ko rashin iya amfani da irin wannan samfurin, ko da Zebra Technologies an shawarci yiwuwar irin wannan. lalacewa. Wasu hukunce-hukuncen ba sa ba da izinin keɓancewa ko iyakance ga lalacewa na faruwa ko kuma sakamakon haka, don haka iyakancewar da ke sama ko keɓe ƙila ba za ta shafi ku ba.

TC22/TC27

Ana kwashe kaya

Lokacin da kuka karɓi TC22/TC27 tabbatar cewa duk abubuwan suna cikin akwati na jigilar kaya.

1. A Hankali ka cire duk kayan kariya daga na'urar kuma adana akwatin jigilar kaya don adanawa da jigilar kaya daga baya.

2. Tabbatar cewa an karbi wadannan:

• Taɓa kwamfuta
• PowerPrecision Lithium-ion baturi
• Jagorar tsari.

3. Bincika kayan aiki don lalacewa. Idan duk wani kayan aiki ya ɓace ko ya lalace, tuntuɓi Cibiyar Tallafawa Abokin Ciniki ta Duniya nan take.

4. Kafin amfani da na'urar a karon farko, cire fim ɗin jigilar kaya mai kariya wanda ke rufe taga scan, nuni, da taga kamara.

Siffofin

Wannan sashe ya lissafa duk fasalulluka na TC22/TC27.

Hoto 1    Gaba View

Tebur 1    Gaba View Siffofin

Lamba	Abu	Aiki
1	Kamara ta gaba	Photosauki hotuna da bidiyo (ana samun su akan wasu samfura).
2	Cajin / Sanarwa LED	Yana nuna halin cajin baturi yayin caji da sanarwar da aka samar da aikace-aikace.
3	Kakakin/ Mai karɓa	Yi amfani don sake kunnawa mai jiwuwa a Handset da Yanayin magana.
4	Kama Data LED	Yana nuna matsayin kama bayanai.

TC22/TC27

Tebur 1    Gaba View Siffofin (Ci gaba)

Lamba	Abu	Aiki
5	Sensor Haske / Kusanci	Yana ƙayyade hasken yanayi don sarrafa ƙarfin nunin hasken baya da kusanci don kashe nuni lokacin da yake cikin yanayin wayar hannu.
6	Kariyar tabawa	Nuna duk bayanan da ake buƙata don aiki da na'urar.
7	Mai magana	Yana bayar da fitowar odiyo don bidiyo da sake kunna kiɗa. Yana bayar da sauti a yanayin lasifikan lasifika
8	Lambobin Cajin Jaririn	Yana ba da cajin na'urar ta hanyar shimfiɗar jariri da na'urorin haɗi.
9	Kebul na USB-C	Yana ba da masaukin USB, sadarwar abokin ciniki, da cajin na'ura ta igiyoyi da na'urorin haɗi.
10	Makirifo	Yi amfani dashi don sadarwa a cikin yanayin Saita hannu.
11	Maballin Dubawa	Yana farawa da kama bayanai (wanda aka tsara shi).
12	Maɓallin Shirye-shirye	Yawanci ana amfani da shi don sadarwar tura-zuwa-Talk. Inda hane-hane na tsari ya kasancea don turawa To-Talk VoIP sadarwar, wannan maɓallin ana iya daidaita shi don amfani da wasu aikace-aikace.

a Pakistan, Qatar

Hoto 2    Na baya View

Tebur 2    Na baya View Siffofin

Lamba	Abu	Aiki
13	NFC Antenna	Yana ba da sadarwa tare da wasu na'urori masu kunna NFC.
14	Baya gama gari I/O 8	Yana ba da hanyoyin sadarwa, sauti, cajin na'ura ta igiyoyi, da na'urorin haɗi.
15	Dutsen Hannun Hannun Dutsen	Yana ba da maɓallin hawa don Basic Hand Strap m.

TC22/TC27

Tebur 2    Na baya View Siffofin (Ci gaba)

Lamba	Abu	Aiki
16	Latsa Sakin Batir	Latsa don cire baturin.
17	Batirin Lithium-ion PowerPrecision	Yana ba da wuta ga na'urar.
18	Volume Up / Down Button	Ƙara da rage ƙarar mai jiwuwa (programmable).
19	Maballin Dubawa	Yana farawa da kama bayanai (wanda aka tsara shi).
20	Filashin kyamara	Yana ba da haske don kyamara kuma yana aiki azaman walƙiya.
21	Kamara ta baya	Photosaukar hotuna da bidiyo.
22	Mai Rikon Kati	Riƙe katin SIM da katin SD.
23	Maɓallin Wuta	Yana kunna nuni da kashewa. Latsa ka riƙe don sake saita na'urar ko kashe ta.
24	Tagar Fitar Scanner	Yana bayar da kama bayanai ta amfani da hoton.
25	Makirifo	Yi amfani da shi don sadarwa a cikin yanayin phonearar lasifika.

Kafa Na'urar

Cika waɗannan abubuwan don fara amfani da TC22/TC27.

Don fara amfani da na'urar a karon farko.

1. Sanya katin amintaccen dijital (SD) katin (zaɓi)

2. Shigar da katin SIM nano (na zaɓi)

3. Shigar da baturin.

4. Cajin na'urar.

Girka microSD Card

Ramin katin microSD na TC22/TC27 yana ba da ajiya na biyu mara maras ƙarfi. Ramin yana ƙarƙashin fakitin baturi. Koma zuwa takaddun da aka bayar tare da katin don ƙarin bayani, kuma bi shawarwarin masana'anta don amfani.

HANKALI: Bi matakan da suka dace na fitarwa na lantarki (ESD) don guje wa lalata

katin microSD. Ingantattun matakan tsaro na ESD sun haɗa da, amma ba'a iyakance su ba, yin aiki akan tabarmar ESD da tabbatar da cewa mai aiki yana ƙasa yadda ya kamata.

TC22/TC27

1. Ciro mariƙin katin daga na'urar.

2. Sanya katin microSD, ƙarshen lamba da farko, tare da lambobin sadarwa suna fuskantar sama, cikin mariƙin katin.

3. Juya katin microSD ƙasa.

4. Danna katin ƙasa cikin mariƙin katin kuma tabbatar da cewa ya zauna daidai. 

5. Sake shigar da mariƙin katin.

Shigar da katin SIM

Ana buƙatar katin SIM don yin kira da canja wurin bayanai akan hanyar sadarwar salula tare da TC27. NOTE: Yi amfani da katin SIM nano kawai.

HANKALI: Don ingantattun matakan fitarwa na lantarki (ESD) don gujewa lalata katin SIM ɗin. Ingantattun matakan tsaro na ESD sun haɗa da, amma ba'a iyakance su ba, yin aiki akan tabarmar ESD da tabbatar da cewa mai amfani ya yi ƙasa sosai.

1. Ciro mariƙin katin daga na'urar.

2. Juya mariƙin katin.

3. Sanya ƙarshen katin SIM, tare da lambobi suna fuskantar sama, cikin mariƙin katin.

4. Juya katin SIM ɗin ƙasa.

5. Latsa katin SIM ɗin ƙasa cikin mariƙin katin kuma tabbatar da cewa ya zauna da kyau. 7

6. Juya mariƙin katin kuma sake shigar da mariƙin katin.

Shigar da Baturi

NOTE: Canjin mai amfani na na'urar, musamman a cikin rijiyar batir, kamar lakabi, kadara tags, zane-zane, da lambobi, na iya lalata aikin da aka yi niyya na na'urar ko na'urorin haɗi. Matakan ayyuka kamar rufewa (Kariyar Ingress (IP)), aikin tasiri (digo da tumble), ayyuka, da juriya na zafin jiki na iya shafar. KADA KA sanya kowane lakabi, kadara tags, zane-zane, ko lambobi a cikin baturi da kyau.

1. Saka batirin, ƙasa da farko, cikin sashin batirin a bayan na'urar.

2. Latsa baturin a cikin sashin batirin har sai batirin ya saki latches ya zama wuri. Kunna eSIM

TC27 na iya amfani da katin SIM, eSIM, ko duka biyun. Zaka iya zaɓar wane SIM don amfani da wane mataki, kamar saƙo ko kira. Kafin amfani da shi, dole ne ka kunna eSIM.

NOTE: Kafin ƙara eSIM, tuntuɓi mai ɗaukar hoto don samun sabis ɗin eSIM da lambar kunnawa ko lambar QR.

Don kunna eSIM:

1. A kan na'urar, kafa haɗin intanet ta hanyar Wi-Fi ko bayanan salula tare da shigar katin SIM.

2. Je zuwa Saituna.

3. Taɓa Network & internet > Hanyoyin Sadarwar Waya.

4. Taɓa + kusa da SIMs idan an riga an shigar da katin SIM ko taɓawa SIMs idan babu katin SIM da aka shigar. The Cibiyar sadarwa ta wayar hannu nunin allo.

5. Zaɓi SHIGA HANNU CODE don shigar da lambar kunnawa ko taɓawa SCAN don bincika lambar QR don zazzage eSIM profile.

The Tabbatarwa!!! nuni akwatin maganganu.

6. Taɓa OK.

7. Shigar da lambar kunnawa ko duba lambar QR.

8. Taɓa NA GABA.

The Zazzage profile nunin saƙon ya biyo baya Yi Amfani da Sunan hanyar sadarwa? sako. 9. Taɓa KUNNA.

10. Taɓa Anyi.

eSIM yanzu yana aiki.

Ana kashe eSIM

Ana iya kashe eSIM akan TC27 na ɗan lokaci kuma a sake kunna shi daga baya.

Don kashe eSIM:

1. A kan na'urar, kafa haɗin intanet ta hanyar Wi-Fi ko bayanan salula tare da shigar katin SIM. 

2. Taɓa Network & internet > SIMs.

3. A cikin Zazzage SIM sashe, taɓa eSIM don kashewa.

4. Taɓa Yi amfani da SIM canza don kashe eSIM.

5. Taɓa Ee.

An kashe eSIM.

Goge eSIM Profile

Goge eSIM profile yana cire shi gaba daya daga na'urar TC27.

NOTE: Bayan goge eSIM daga na'urar, ba za ku iya sake amfani da shi ba.

Don share eSIM:

1. A kan na'urar, kafa haɗin intanet ta hanyar Wi-Fi ko bayanan salula tare da shigar katin SIM. 2. Taɓa Network & internet > SIMs.

3. A cikin Zazzage SIM sashe, taɓa eSim don gogewa.

4. Taɓa Goge.

The Goge wannan zazzagewar SIM? nunin saƙo.

5. Taɓa Goge.

eSIM profile an goge daga na'urar.

Cajin Na'urar

HANKALI: Tabbatar cewa kun bi ƙa'idodin amincin baturi da aka kwatanta a cikin na'urar

Jagoran Maganar Samfur.

Yi amfani da ɗayan kayan haɗi masu zuwa don cajin na'urar da / ko rarar batir.

NOTE: Canjin baturin yana caji duka daidaitattun batura da tsayin daka.

Tebur 3    Caji da Sadarwa

Bayani	Lambar Sashe	Cajin		Sadarwa
		Baturi (A cikin Na'ura)	Ajiye Baturi	USB	Ethernet
1-Caji kawai Yar jariri	CRD-TC2L-BS1CO-01	Ee	A'a	A'a	A'a
1-Slot USB Crad	CRD-TC2L-SE1ET-01	Ee	A'a	Ee	A'a
1-Slot Cajin Kawai tare da Safa na Baturi Cradle	Saukewa: CRD-TC2L-BS11B-01	Ee	Ee	A'a	A'a
4-Cajin Batirin Caja	Saukewa: SAC-TC2L-4SCHG-01	A'a	Ee	A'a	A'a
5-Caji kawai Yar jariri	CRD-TC2L-BS5CO-01	Ee	A'a	A'a	A'a
5-Slot Ethernet shimfiɗar jariri	CRD-TC2L-SE5ET-01	Ee	A'a	A'a	Ee

Babban Cajin Baturi

Kafin amfani da na'urar a karon farko, yi cajin babban baturi har sai koren Caji/Sanarwa mai haske (LED) ya kasance yana kunnawa. Yi amfani da kebul ko shimfiɗar jariri mai dacewa da wutar lantarki don cajin na'urar.

Akwai batura guda uku akwai:

• Madaidaicin 3,800 mAh PowerPrecision LI-ON Baturi - lambar sashi: BTRY-TC2L-2XMAXX-01

• Madaidaicin 3,800 mAh PowerPrecision LI-ON Baturi tare da BLE Beacon - lambar ɓangaren: BTRY TC2L-2XMAXB-01

• Ƙarfafa 5,200 mAh PowerPrecision LI-ON Baturi - lambar ɓangaren BTRY-TC2L-3XMAXX-01

LED Charging/Sanarwa na na'urar yana nuna halin cajin baturi a cikin na'urar. Madaidaicin cajin baturi daga cikakken ƙarewa zuwa 80% a cikin ƙasa da awa 1 da mintuna 20. Tsawaita cajin baturi daga cikakke ya ƙare zuwa 80% a cikin ƙasa da awa 1 da mintuna 50.

NOTE: Yi cajin baturi a zafin daki tare da na'urar a Yanayin Barci.

Tebur 4    Caji/Sanarwa Manunonin Cajin LED

Jiha	Nuni
Kashe	Na'urar ba ta caji. An shigar da na'urar kuskure a cikin shimfiɗar jariri ko an haɗa ta zuwa tushen wuta. Ba a kunna caja/ shimfiɗar jariri ba.

Tebur 4    Caji/Sanarwa Manunonin Cajin LED (Ciga gaba)

Jiha	Nuni
Slow Blinking Amber (1 yana haske kowace dakika 4)	Na'urar tana caji.
Jan Blowing Ja (1 kiftawa da sakan kowane 4)	Na'urar tana caji, amma baturin yana ƙarshen rayuwarsa mai amfani.
Kore mai ƙarfi	Cajin ya cika.
Ja mai ƙarfi	Cajin ya cika, amma baturin yana ƙarshen rayuwarsa mai amfani.
Saurin Haskewar Amber (2 blinks / second)	Kuskuren caji, ga tsohonampda: • Zazzabi yayi ƙasa da ƙasa ko kuma yayi girma. Cajin ya yi tsayi da yawa ba tare da ƙarewa ba (yawanci awa takwas).
Saurin Rage Haske (2 blinks / second)	Kuskuren caji amma baturin yana ƙarshen rayuwarsa mai amfani, misaliampda: • Zazzabi yayi ƙasa da ƙasa ko kuma yayi girma. Cajin ya yi tsayi da yawa ba tare da ƙarewa ba (yawanci awa takwas).

Cajin Baturi

Ledojin cajin baturi na Spare akan Cajin baturi mai ramuka 4 suna nuna matsayin cajin baturin.

Ma'auni da tsawaita cajin baturi daga cikakken ƙarewa zuwa 90% cikin ƙasa da sa'o'i 4.

LED	Nuni
Amber mai ƙarfi	Ajiyayyen baturin yana caji.
Kore mai ƙarfi	Cajin baturi ya cika.
Ja mai ƙarfi	Batirin kayan aikin yana caji, kuma baturin yana ƙarshen rayuwarsa mai amfani. Cajin ya cika, kuma baturin yana ƙarshen rayuwarsa mai amfani.
Saurin Rage Haske (2 blinks / second)	Kuskuren caji; duba wurin ajiye baturin, kuma baturin yana ƙarshen rayuwarsa mai amfani.
Kashe	Babu ajiyar baturi a cikin ramin. Ba a sanya ajiyar baturin a cikin ramin daidai ba. Ba a kunna shimfiɗar jariri ba.

Cajin Zazzabi

Yi cajin baturi a yanayin zafi daga 5°C zuwa 40°C (41°F zuwa 104°F). Na'urar ko shimfiɗar jariri koyaushe tana yin cajin baturi cikin aminci da hankali. A yanayin zafi mafi girma (misaliample, kamar +37°C (+98°F)), na'urar ko shimfiɗar jariri na iya, na ɗan lokaci kaɗan, a madadin haka da kashe cajin baturi don kiyaye baturin a yanayin zafi mai karɓa. Na'urar da shimfiɗar jariri suna nuna lokacin da aka kashe caji saboda rashin yanayin zafi ta LED ɗinta.

1-Slot Cajin kawai shimfiɗar jariri

Wannan shimfiɗar jariri yana ba da ƙarfi ga na'urar.

HANKALI: Tabbatar cewa kun bi jagororin don amincin baturi da aka kwatanta a cikin Jagorar Maganar Samfur.

Cajin 1-Ramuka Kadai:

• Yana ba da wutar lantarki 5 VDC don sarrafa na'urar.

• Cajin baturin na'urar.

Hoto 3    1-Slot Cajin kawai shimfiɗar jariri

1	Ramin cajin na'ura tare da shim.
2	Tashar wutar lantarki ta USB.

1-Slot USB Crad

Wannan shimfiɗar jariri yana ba da wutar lantarki da sadarwar USB.

HANKALI: Tabbatar cewa kun bi jagororin don amincin baturi da aka kwatanta a cikin Jagorar Maganar Samfur.

Kebul na Kebul na 1-Slot:

• Yana ba da wutar lantarki 5 VDC don sarrafa na'urar.

• Cajin baturin na'urar.

• Yana ba da sadarwar USB tare da kwamfuta mai ɗaukar hoto.

• Tare da na'ura mai ba da hanya tsakanin hanyoyin sadarwa da madaidaicin ke ba da USB tare da kwamfuta mai ɗaukar hoto da/ko sadarwar Ethernet tare da hanyar sadarwa.

Hoto 4    1-Slot kebul na USB

1	Ramin cajin na'ura tare da shim.
2	Wutar Lantarki

1-Slot Cajin Kawai tare da Safa na Baturi Cradle

Wannan shimfiɗar jariri yana ba da iko don yin cajin na'ura da baturi mai fa'ida.

HANKALI: Tabbatar cewa kun bi jagororin don amincin baturi da aka kwatanta a cikin Jagorar Maganar Samfur.

Cajin Ramin Ramin 1 kawai tare da shimfiɗar shimfiɗar baturi:

• Yana ba da wutar lantarki 5 VDC don sarrafa na'urar.

• Cajin baturin na'urar.

• Cajin keɓaɓɓen baturi.

Hoto 5    1-Slot Cradle with Spare Battery Slot

1	Ramin cajin baturi.
2	LED cajin baturi spare
3	USB-C tashar jiragen ruwa Tashar USB-C mai haɗin sabis ce kawai don haɓaka firmware kuma ba a yi niyya don cajin wuta ba.
4	Wutar Lantarki
5	Ramin cajin na'ura tare da shim

4-Cajin Batirin Caja

Wannan sashe yana bayyana yadda ake amfani da Cajin baturi mai ramuka 4 don yin cajin baturan na'ura har zuwa hudu.

HANKALI: Tabbatar cewa kun bi jagororin don amincin baturi da aka kwatanta a cikin Jagorar Maganar Samfur.

Hoto 6    4-Cajin Batirin Caja

1	Ramin baturi
2	LED Cajin baturi
3	Wutar Lantarki
4	USB-C tashar jiragen ruwa Tashar tashar USB-C mai haɗin sabis ce don haɓaka firmware kawai kuma ba a yi niyya don cajin wuta ba.

5-Slot Cajin kawai shimfiɗar jariri

Wannan sashe yana bayyana yadda ake amfani da Cajin baturi mai ramuka 5 don yin cajin baturan na'ura har guda biyar.

HANKALI: Tabbatar cewa kun bi jagororin don amincin baturi da aka kwatanta a cikin Jagorar Maganar Samfur.

Cajin 5-Ramuka Kadai:

• Yana ba da wutar lantarki 5 VDC don sarrafa na'urar.

• A lokaci guda yana cajin har zuwa na'urori biyar.

Hoto 7    5-Slot Cajin kawai shimfiɗar jariri

1	Ramin cajin na'ura tare da shim
2	Wutar Lantarki

5-Slot Ethernet shimfiɗar jariri

HANKALI: Tabbatar cewa kun bi jagororin don amincin baturi da aka kwatanta a cikin Jagorar Maganar Samfur.

5-Slot Ethernet Cradle:

• Yana ba da wutar lantarki 5 VDC don sarrafa na'urar.

• Haɗa na'urar (har zuwa biyar) zuwa cibiyar sadarwar Ethernet.

• A lokaci guda yana cajin har zuwa na'urori biyar.

Hoto 8    5-Slot Ethernet shimfiɗar jariri

1	Ramin cajin na'ura tare da shim
2	1000 LED
3	100/100 LED

Kebul na USB

Kebul na USB yana toshe cikin kasan na'urar. Lokacin da aka haɗe zuwa na'urar, kebul ɗin yana ba da damar yin caji, canja wurin bayanai zuwa kwamfuta mai masauki, da haɗa abubuwan kebul na USB.

Hoto 9    Kebul na USB

Ana dubawa tare da Injin Cikin gida

Don karanta lambar lamba, ana buƙatar aikace-aikacen da aka kunna scan. Na'urar tana dauke da aikace-aikacen DataWedge, wanda ke ba ka damar kunna mai hoto, yanke bayanan barcode, da kuma nuna abun ciki na barcode.

NOTE: SE55 yana nuna alamar dash-dot-dash amer. Mai hoto SE4710 yana nuna alamar ja dige.

1. Tabbatar cewa aikace-aikacen yana buɗe akan na'urar, kuma filin rubutu yana cikin mayar da hankali (maƙalar rubutu a filin rubutu). 

2. Nuna taga fitowar na'urar daukar hoto a lambar barcode.

3. Danna ka riƙe maɓallin dubawa.

Na'urar tana aiwatar da tsarin manufa.

NOTE: Lokacin da na'urar ke cikin Yanayin Zaɓin Zaɓi, na'urar ba ta yanke lambar barcode har sai tsakiyar ɗigon ta taɓa lambar barcode.

4. Tabbatar da lambar barcode tana cikin yankin da aka kafa ta tsarin manufa. Ana amfani da ɗigon maƙasudin don ƙara gani a yanayin haske mai haske.

SE4710	SE55

Yanayin Zaɓin SE4710	Yanayin Zaɓin SE55

Hasken LED Capture Data yana kunna, kuma na'urar ta yi ƙara, ta tsohuwa, don nuna cewa an ɓata lambar lambar cikin nasara.

5. Saki maballin scan.

NOTE: Ƙididdigar hoto yawanci yana faruwa nan take. Na'urar tana maimaita matakan da ake buƙata don ɗaukar hoto na dijital (hoton) mara kyau ko mai wahala muddin maɓallin duba ya ci gaba da dannawa.

Na'urar tana nuna bayanan barcode a cikin filin rubutu.

Abubuwan la'akari da ergonomic

Guji matsananciyar kusurwar wuyan hannu kamar waɗannan lokacin amfani da na'urar.

KA GUJI MAFARKI

KUNGIYAR KWANA

Bayanin Sabis

Ana samun sabis na gyare-gyare ta amfani da ɓangarorin da suka cancanta na Zebra na aƙalla shekaru uku bayan ƙarshen samarwa kuma ana iya nema a zebra.com/support.

www.zebra.com

Takardu / Albarkatu

ZEBRA TC2 Series Touch Mobile Computer [pdf] Jagorar mai amfani TC22, TC27, TC2 Series Touch Mobile Computer, TC2 Series Mobile Computer, Touch Mobile Computer, Mobile Computer, Computer

Magana

• Manual mai amfani