TRIPP-LITE S3MT-100KWR480V S3MT-Series 3-Input Input and Output Transformers
GARANTIN GASKIYA
Yi rijista samfurin ku a yau kuma za a shigar da shi ta atomatik don cin nasara mai karewa na ISOBAR® a cikin zanenmu na wata-wata!
tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 Amurka • tripplite.com/support Haƙƙin mallaka © 2021 Tripp Lite. An kiyaye duk haƙƙoƙin
Gabatarwa
Tripp Lite's S3MT-100KWR480V shine mai 480V Wrap-Around Transformer wanda ya haɗa da masu canzawa guda biyu a cikin yadi ɗaya: 480V (Delta) zuwa 208V (Wye) shigar da keɓancewar matakin ƙasa da na'urar wuta ta 208V (Wye) zuwa 480V (Wye) fitarwa ta atomatik. - mai canzawa.
Mai haɗawa da keɓantawar shigar da wutar lantarki yana rage hawan layin mai amfani da tudu, yayin da yake kare UPS. An ƙera na'urar wutar lantarki ta atomatik don tallafawa nauyin 480V (Wye) IT. Wannan samfurin yana da ginanniyar na'urorin kewayawa don hana wuce gona da iri mai haɗari. Magoya bayan ƙwallon ƙafa takwas suna kula da aikin shiru kuma suna taimakawa wajen watsar da zafin wuta. Relay mai saurin jin zafi da sauyawa, haɗe tare da hasken LED a gaban panel, yana ba da faɗakar da zafin jiki da kariya mai zafi. Ƙaramin sawun tsarin UPS da ƙwaƙƙwaran sauti mai shirufile ba da damar shigarwa tare da ƙaramin sarari da tasirin amo. Taswirar tana da ƙaƙƙarfan gidaje na ƙarfe duka tare da allon gaba mai kama da layin S3M-Series 208V 3-Phase UPS.
| Samfurin UPS | Lambar Jerin | Iyawa | Bayani |
| Saukewa: S3MT-100KWR480V | DA-0513 | 100kW | Mai Canjin Shigarwa: 480V zuwa 208V Keɓewar Matakan Saukowa
Transformer na fitarwa: 208V zuwa 480V Mai Canja wurin Matakan Matakan Kai |
Aikace-aikace na yau da kullun
4-Wire (3Ph + N + PE) kayan aikin IT a cikin gwamnati, masana'antu, asibitoci, saitunan masana'antu da saitunan kamfanoni waɗanda ke da 480V lantarki mains da 480V IT lodi.
Mabuɗin Siffofin
- Shigar da taswirar matakin ƙasa tana ba da kariya ta keɓewar 480V (Delta) zuwa 208V/120V (Wye) zuwa shigar da UPS
- Canjin atomatik na fitarwa yana ba da 208V (Wye) zuwa 480V (Wye) haɓaka don tallafawa nauyin 480V IT
- Masu saɓowar kewayawa a wurin fitar da na'urar watsa bayanai da shigar da na'urar wutar lantarki
- Gargadi mai zafi da karewa
- 96.7% zuwa 97.8% inganci
- Copper windings
- Babban fa'ida voltage da kewayon aiki na mitar: Voltage: -20% zuwa +25% @ 100% kaya da 40-70 Hz
- Ajin rufi: 180 abu
- An gwada dogaro da aminci bisa ga ISTA-3B don girgizawa, girgiza, sauke (gwajin gwaji)
- UL da CSA TUV takaddun shaida
- Matsugunin duk-karfe da aka yi jigilar kaya a shirye don shigarwa
- Garanti na shekaru 2
Na Musamman Kanfigareshan
Mai jujjuyawar 480V Wrap-Around (WR) ya haɗa da abubuwan shigarwa (T-in) da fitarwa (T-out) a cikin yadi ɗaya.
Ana iya siyan wannan 480V Wrap-Around Transformer daban ko azaman wani ɓangare na ƙirar kit tare da Trip Lite S3M80K ko S3M100K 3-Phase UPS:
| Samfuran Canja-canje | Matsakaicin Maɗaukakiyar Load | Mai jituwa da 208V 3 PH UPS | Models na Kit: UPS + Transformer | ||
| Samfuran Kit | Samfuran Kit ɗin sun haɗa | ||||
|
480V |
Saukewa: S3MT-100KWR480V |
100kW |
UPS 80-100kW |
Saukewa: S3M80K-100KWR4T | S3M80K UPS + S3MT-100KWR480V |
| Saukewa: S3M100K-100KWR4T | S3M100K UPS + S3MT-100KWR480V | ||||
Muhimman Gargaɗi na Tsaro
Ajiye waɗannan umarni
Wannan jagorar ya ƙunshi mahimman umarni don ƙirar S3MT-100KWR480V waɗanda yakamata a bi su yayin shigarwa da kulawa da taswira da UPS.
HANKALI! Hadarin girgiza wutar lantarki! Abubuwan raye-raye masu haɗari a cikin wannan naúrar ana ƙarfafa su daga taransfoma ko da an kashe na'urar.
GARGADI! Naúrar da aka yi niyya don shigarwa a cikin yanayi mai sarrafawa.
HANKALI! Na'urar taswira na iya gabatar da haɗarin girgiza wutar lantarki da gajeriyar kewayawa. Ya kamata a kiyaye matakan tsaro masu zuwa yayin aiki akan na'urar transfoma:
- Cire agogo, zobe ko wasu abubuwa na ƙarfe.
- Yi amfani da kayan aikin da keɓaɓɓun hannaye.
Don rage haɗarin bugun wutar lantarki, cire haɗin mai jujjuyawar da UPS daga wadatattun mains kafin yin gyara ko sabis.
Ba da sabis na taswira-3-lokaci da UPS yakamata ma'aikatan bokan Tripp Lite su yi tare da ilimin taswirar lokaci 3 da UPS da duk matakan da ake buƙata.
Transformer yana da nauyi sosai. Ya kamata a yi taka tsantsan wajen motsi da sanya kayan aiki. Umurnin da ke ƙunshe cikin wannan littafin yana da mahimmanci kuma yakamata a bi a koyaushe a duk lokacin shigarwa da bin diddigin mai jujjuyawar 3 da UPS.
HANKALI!
Gidan wuta yana da matakin zafi mai haɗari. Idan mai jujjuya gaban gaban panel ja alamar LED yana kunne, kantunan naúrar na iya samun matakin zafi mai haɗari.
Duk sabis akan wannan kayan aikin dole ne a aiwatar da ƙwararrun ma'aikatan Tripp Lite.
Kafin gudanar da wani gyara, gyara ko jigilar kaya, da farko tabbatar da kashe komai gaba ɗaya kuma an cire haɗin.
Shigarwa
Bayanan Injini
Bukatun Jiki
Bar sarari kusa da kabad don aiki da samun iska (Hoto 3-1):
- Bar akalla 23.6 inci (600 mm) sarari a gaba don samun iska
- Bar aƙalla inci 20 (500 mm) sarari a dama da hagu don aiki
- Bar aƙalla 20 inci (500 mm) sarari a baya don samun iska
Duban Kunshin
- Kada a jingina majalisar taransifomar lokacin cire ta daga kunshin.
- Bincika bayyanar don ganin ko majalisar ministocin ta lalace yayin jigilar kaya. Kar a ba da iko a kan gidan wuta idan an sami wata lalacewa. Tuntuɓi dillalin nan da nan.
- Duba na'urorin haɗi akan lissafin shiryawa kuma tuntuɓi dila idan akwai ɓatattun sassan.
Ana buɗe UPS
Rike farantin mai zamiya a tsaye. Yanke kuma cire madaurin ɗaure (Hoto 3-2).
Cire jakar filastik da kwalin waje (Hoto 3-3). 
Cire kayan tattara kumfa da pallet ɗin da aka lakafta (Hoto 3-4).
Cire sukulan da ke tabbatar da majalisar zuwa pallet (Hoto na 3-5).
Ɗaga majalisar tare da cokali mai yatsa kuma cire palette ɗin tattarawa (Hoto 3-6).
Abubuwan Kunshin
| Abubuwan da ke ciki | TL P/N | Saukewa: S3MT-100KWR480V |
| Canja wurin shigarwa da fitarwa a cikin Majalisar Ministoci Daya | 1 | |
| Littafin Mai shi | 933D06 | 1 |
| Tufafin Ƙasa | 1038F8A | 2 |
| Tufafin Ƙasa | 103924 A | 2 |
| Sukurori don Skirts | 3011C3 | 24 |
Majalisar Ministaview
- Fitar Mai Canjawa Sama da Zazzabi Ƙararrawa LED
- Ƙararrawar Ƙararrawar Canjin Canjin Shigar da Canjin Canjin Zazzabi LED
- Fitar Mai Canjawa Cooling Fans
- Magoya bayan Canja-canje masu sanyawa
- Shigar da Mai Saurin Shigarwa tare da Tafiya
- Fitar Mai Taswira tare da Tafiya
- Input Transformer Cabling Terminal
- Tashar Tashar Canjin Canji ta Fitarwa
- Knockouts na Shiga ƙasa (don Shigar Cable Power da Fita
Gaba View (Terminal Block ba tare da Murfin) na S3MT-100WR480V
Wutar Lantarki
Tsarin kebul zai dace da ƙarartages da raƙuman ruwa da aka bayar a wannan ɓangaren, kuma daidai da lambobin lantarki na gida.
GARGADI!
BAYAN FARA, TABBATAR KANA SANI WURI DA AIYUKA NA WAJEN IZALA DA AKE HADA DA UPS INPUT/BYPASS NA PANEL RABON AMFANI.
TABBATAR DA WADANNAN KAYAN KAYAN SUN KEBACI WUTAR LANTARKI KUMA KA BUGA ALAMOMIN GARGADI DOMIN HANA AIKI BA TARE.
Girman Cable
|
Samfurin UPS |
Girman Cable (Wayar THHW a 75 ° C) | ||||||||
| Shigar AC | Fitar AC | tsaka tsaki | Kasa | Lug | |||||
| Ma'auni | Torque | Ma'auni | Torque | Ma'auni | Torque | Ma'auni | Torque | ||
|
S3MT- 100KWR480V |
Shigar da wutar lantarki | ||||||||
| 70mm2 Max. 120mm2 |
50N•m |
70mm2x2 Max.
120mm2x2 |
50N•m |
120mm2x2 Max.
120mm2x2 |
50N•m |
95mm2 Max.
120mm2x2 |
50N•m |
M10 |
|
| Fitar da wutar lantarki | |||||||||
| 70mm2 Max.
120mm2x2 |
50N•m |
70mm2x2 Max.
120mm2x2 |
50N•m |
120mm2x2 Max.
120mm2x2 |
50N•m |
95mm2 Max.
120mm2x2 |
50N•m |
M10 |
|
Shigarwa da Fitarwa Tsarin Layin Haɗin Canza-zuwa-UPS
Ana nuna haɗin kai a ƙasa don majalisar ministocin tare da ginanniyar shigarwar mai keɓantawa, mai fitarwa ta atomatik da masu fasa wuta tare da balaguro da LED kuskure.
Input da Fitar Haɗin Canzawa
GARGADI: Mai shigar da wutar lantarki (T-in) tsaka tsaki na fitarwa bai haɗa shi da ƙasan chassis ba. Da fatan za a samar da hanyar haɗa ƙasan chassis na transformer zuwa tsaka tsakin fitarwar tafsiri. Lura: Dole ne a haɗa ƙasan chassis na transformer zuwa ƙasan ƙasa.
MUHIMMI: Kuna iya view da/ko zazzage wannan littafin daga tripplite.com website ku view haɗin kebul a cikin launuka. 
Transformer Cabinet
Lura: Shigar da Transformer shine Delta 3-Wire (3Ph + Ground) kuma mai fitarwa shine Wye 4-Wire (3Ph + N + Ground).
Aiki
GARGADI:
Ba a ba da shawarar haɗa UPS guda biyu a layi ɗaya lokacin amfani da masu canza wutar lantarki ga kowane UPS.
Kariya fiye da zafin jiki
Gargadi na Ƙarar Zazzabi LED (Ja)
Na'urar ta atomatik ta haɗa da fitilun LED masu faɗakarwa guda biyu a saman ɓangaren gaban panel: haske ɗaya don na'urar shigar da bayanai da kuma haske ɗaya don na'urar fitarwa. Hasken faɗakarwa daidai gwargwado na iya kunnawa lokacin da gefen na biyu na shigarwar (T-in) ko kuma lokacin da ɓangaren farko na kayan fitarwa (T-out) transfomer ya kai zazzabi na 160°C ± 5°C, watau kewayon 155° C zuwa 165°C (311°F zuwa 329°F). Hasken faɗakarwa yana kashewa lokacin da taswirar ta yi sanyi zuwa zafin jiki na 125°C ± 5°C, watau kewayon 120°C zuwa 130°C (248°F zuwa 266°F).
Relay na Kariyar Zazzabi da Canjin Zazzabi
Gidan wuta ya haɗa da fitilun LED masu faɗakarwa guda biyu a saman ɓangaren gaban panel. Haske ɗaya don na'urar watsa bayanai da kuma haske ɗaya don na'urar fitarwa. Hasken faɗakarwa daidai gwargwado zai kunna lokacin da gefen na biyu na shigarwar (T-in) ko lokacin da ɓangaren farko na kayan fitarwa (T-out) transfomer ya kai zazzabi na 160°C ± 5°C, watau kewayon 155° C zuwa 165°C (311°F zuwa 329°F). Hasken faɗakarwa yana kashewa lokacin da taswirar ta yi sanyi zuwa zafin jiki na 125°C ± 5°C, watau kewayon 120°C zuwa 130°C (248°F zuwa 266°F).
- Transformer (T-in): Idan bangaren na biyu na na'urar ta (T-in) ya kai yanayin zafi na 160°C ± 5°C, watau kewayon 155°C zuwa 165°C (311°F zuwa 329° F), na'ura mai ba da hanya tsakanin zafin jiki da zafin rana zai kunna kuma zai buɗe mai karyawa a gefen na biyu na taransfoma. Da zarar zafin jiki na wutar lantarki ya huce zuwa 125°C ± 5°C, watau kewayon 120°C zuwa 130°C (248°F zuwa 266°F) hasken wutar lantarki zai kashe, kuma zaku iya sakewa da hannu. kunna (kusa) na'urar fitarwa a kan taswira don sake fara aiki na yau da kullun.
- Transformer (T-out): Idan ɓangaren farko na (T-out) na wutar lantarki ya kai yanayin zafi 160°C ± 5°C, watau kewayon 155°C zuwa 165°C (311°F zuwa 329°C) F), na'ura mai ba da hanya tsakanin hanyoyin sadarwa da yanayin zafi zai kunna kuma zai buɗe mai karyawa a gefen farko na na'urar. Da zarar zafin jiki na wutan lantarki ya huce zuwa 125°C ± 5°C, watau kewayon 120°C zuwa 130°C (248°F zuwa 266°F), hasken wutar lantarkin zai kashe, kuma zaku iya sakewa da hannu. -kunna (kusa) na'urar shigar da bayanai akan taswira don sake fara aiki na yau da kullun.
Ƙayyadaddun bayanai
| Samfura | Saukewa: S3MT-100KWR480V | |
|
Bayani |
Masu Canji na 100kW guda biyu a cikin Majalisar Ministoci ɗaya: Mai Canja Wuta na Input (T-In) 480V Input (Delta) zuwa 208V Output (Wye) Transformer, da Fitarwa AutoTransformer
(T-Out) 208V (Wye) Shigarwa zuwa 480V(Wye) fitarwa |
|
| Ƙimar KVA/kW don Input (T-in) da Fitar (T-out) Masu Canzawa | 100kVA/100kW | |
| Nau'in Mai Canzawa | Dry-Nau'in | |
| SPECS | ||
| Transformer (T-In) | T-in Input Voltage | 480V AC |
| T-in Input Voltage Range | (-45%+25%) na 40% kaya (-20%+25%) don kaya 100 % | |
| Shigar T-in Amp(s) | 168 AMPS | |
| T-in Input No. Na matakai | 3 PH | |
| T-in Input Connections | 3-Waya (L1, L2, L3 + PE) | |
| T-in AC Kanfigareshan Shigarwa | DELTA | |
| T-in Iput Connection Type | Bar Bar | |
| T-in AC Mitar shigarwa | 50/60 Hz | |
| Matsakaicin T-in | 40-70 Hz | |
| T-in Voltage Zabi | N/A | |
| Voltage Drop Ratio: Fitarwa ba tare da kaya don fitarwa tare da Cikakken Load | £ 3% | |
| Warewar T-Input | Ee | |
| Shigarwar T-a na Yanzu | 1450/3330 (10 mS) | |
| Fitar Transfomer (T- fita) | T-out Input Voltage Range | -45%+25%) na 40% kaya (-20%+25%) don kaya 100 % |
| T-out Input Voltage | 208V | |
| Shigar T-fita Amp(s) | 287 A | |
| T-fita No. Na matakai | 3PH | |
| T-fita Haɗin Input | 4-Way (L1, L2, L3 + N + PE) | |
| T-out AC Kanfigareshan Shigarwa | WYE | |
| Nau'in haɗin shigarwa T-out | Bar Bar | |
| T-out AC Mitar Shigarwa | 50/60 Hz | |
| T-out Mitar Range | 40-70 Hz | |
| T-out Voltage Zabi | N/A | |
| Warewar shigar da T-fita | A'a | |
| T-out Input Inrush Yanzu | 3330 (10 ms) | |
| Samfura | Saukewa: S3MT-100KWR480V | |
| Fitarwa tabarau | ||
| Transformer (T-In) | T-in AC fitarwa Voltage (V) | 208V |
| T-in AC fitarwa Amps | 374 A | |
| T-in Fitowar Lamba. Na matakai | 3PH | |
| Haɗin Fitar T-in | 4-Way (L1, L2, L3 + N + PE) | |
| T-in AC Kanfigareshan Fitarwa | Wye | |
| Nau'in Haɗin T-in | Bar Bar | |
| Ƙididdiga Mai Kashe Fitar T-in | 400 A | |
| Fitar da Transformer (T- fita) | T-out AC fitarwa Amps | 120 A |
| T-fitarwa No. Na matakai | 3PH | |
| Haɗin Fitar T-in | 4-Way (L1, L2, L3 + N + PE) | |
| T-out AC Kanfigareshan Fitar | Wye | |
| Nau'in Haɗin T-out | Bar Bar | |
| Ƙididdiga Mai Kashe Fitar T-in | 400 A | |
| Aiki | ||
| LED Gargaɗi Sama da Zazzabi (Ja) | Yana kunna a 160°C ±5°C (155°C/311°F zuwa 165°C/329°F) kuma yana kashewa a 125°C ±5°C (120°C/248°F zuwa 130°C /266°F) | |
|
Na'urar Sake Sake Kariyar Zazzabi |
T-in: Canja wurin shigarwa
l Kashe fitarwar mai canzawa (Breaker yana buɗewa) a zazzabi na 160°C ± 5°C, watau kewayon 155°C zuwa 165°C (311°F zuwa 329°F). l Kuna iya kunna (kusa) mai fasa fitarwa da hannu lokacin da hasken LED ya kashe T-out: Transfomer fitarwa l Shigarwar taswira/na farko za ta kasance KASHE (Breaker yana buɗewa) a yanayin zafi na 160°C ±5°C (155°C/311°F zuwa 165°C/329°F) l Kuna iya kunna (kusa) mai karyawar shigarwa da hannu lokacin da hasken LED ya kashe l Hasken faɗakarwa zai kashe a 125°C ±5°C (120°C/248°F zuwa 130°C/266°F), wanda a lokacin zaku iya rufe mai karyawa da hannu don sake kunnawa. |
|
| Insulation Class | 180°C | |
| Hawan zafin jiki | 125°C | |
| T-in Efficiency @ Cikakken Load | 96.70% | |
| T-in Efficiency @ Rabin Load | 97.80% | |
| T-out Efficiency @ Cikakken Load | 96.70% | |
| T-out Efficiency @ Rabin Load | 97.80% | |
| Samfura | Saukewa: S3MT-100KWR480V | |
| Bayanin Jiki | ||
| Tsayin Naúrar (Inci/cm) | 77.6 / 197.1 | |
| Nisa Naúrar (Inci/cm) | 23.6 / 60 | |
| Zurfin Naúrar (Inci/cm) | 33.5 / 85.1 | |
| Nauyin Naúrar Lbs. | 1960 / 889 | |
| Ƙoron Ƙasa | 1322 (kg/m²) | |
| Unit Carton Height Inci | 85.4/216.9 | |
| Nisa Inci Na Unit Carton | 27.6/70.1 | |
| Zurfin Inci na Carton | 37.8/96 | |
| Nauyin Kwalin Kwali | 2072/939.8 | |
| Tip-n-Tell Label da ake buƙata (Y/N) | Ee | |
| Audible Noise (ENG) | 65dB max | |
| Danshi | 95% | |
| Rushewar thermal Kan layi a Cikakken Load, (Btu/Hr) | 22526 | |
| Ma'ajiya Zazzabi (ENG) | -15°C ~ 60°C | |
| Yanayin Aiki (ENG) | 0°C ~ 40°C | |
| Hawan Aiki | <METTER 1000 GA WUTA MAI KYAU
(SAMA 1000M KARSHEN WUTA SHINE 1% A CIKIN 100M |
|
| Makanikai | ||
| Transformer Winding | Aluminum Waya | |
| Kayan Majalisar | Cold birgima galvanized Karfe (SGCC) | |
| Launin Majalisar | Farashin 9011 | |
| Fan (Nau'i / Yawan) | 8 x KWALLIYA, 172 × 152 mm (1928 TOTAL CFM) | |
| Dogara | ||
| Jijjiga | ISTA-3B | |
| Girgiza kai | ISTA-3B | |
| Sauke | ISTA-3B (Gwajin Tip) | |
| Amincewa da Hukumar | ||
| Hukumar Amincewa | cTUVs | |
| An gwada Standard na Hukumar | UL 1778 Bugu na 5 | |
| Yarjejeniyar Kanada | CSA 22.2-107.3-14 | |
| Takaddun CE | N/A | |
| Amincewar EMI | N/A | |
| RoHS/ISU | Ee | |
Adana
Ajiye transformer a cikin akwati na jigilar kayayyaki na asali, idan ya yiwu.
GARGADI: Gidan wuta (s) yana/yana da nauyi sosai. Kafin adanar na’urar taransifoma, tabbatar da la'akari da abubuwan da ake buƙata na shimfida ƙasa (kg/m²) da aka jera a sashe na 5. Bayanai a ƙarƙashin “Bayanin Jiki” don adana lafiya.
Garanti da Yarda da Dokoki
Garanti mai iyaka
Mai siyarwa yana ba da garantin wannan samfur, idan aka yi amfani da shi daidai da duk umarnin da ya dace, don samun 'yanci daga lahani na asali na kayan aiki da aiki na tsawon shekaru 2 daga ranar siyan farko. Idan samfurin yakamata ya zama mai rauni a cikin kayan aiki ko ƙwarewa a cikin wannan lokacin, Mai siyarwa zai gyara ko maye gurbin samfurin, cikin ikonsa kawai. Sabis a ƙarƙashin wannan Garanti ya ƙunshi ɓangarori kawai. Abokan ciniki na duniya yakamata su tuntuɓi tallafin Tripp Lite a
intlservice@tripplite.com. Abokan ciniki na Amurka ya kamata su tuntuɓi Sabis na Abokin Ciniki na Tripp Lite a 773-869-1234 ko ziyarta intlservice@tripplite.comtripplite.com/support/help
Wannan garantin baya amfani da sawa na al'ada ko don lalacewa sakamakon hatsari, rashin amfani, cin zarafi ko sakaci. MAI SALLA BA YA YI GARANTIN KIYAYEWA SAI GARANTIN DA AKA SHIGA GASKIYA ANAN. SAI DAI DAI DAI DOKAR DOKA MAI DOKA TA HARAMTA, DUK GARANTIN DA AKE NUFI, HADA DUK GARANTIN CIN KYAUTA KO KWANCIYARWA, ANA IYA IYAKA A LOKACIN WANDA AKA SANYA GORANTI A Sama; KUMA WANNAN GARANTIN YA KIYAYE DUK ILLOLIN MAFARA DA SAMARI. (Wasu jihohi ba sa ba da izinin iyakance tsawon lokacin da garanti mai fayyace ya kasance, kuma wasu jihohin ba sa ba da izinin keɓance ko iyakancewar lalacewa ko lahani, don haka iyakoki ko keɓantawa na sama bazai shafi ku ba. Wannan Garanti yana ba ku takamaiman haƙƙin doka. , kuma kuna iya samun wasu haƙƙoƙi, waɗanda suka bambanta daga hukunce-hukunce zuwa hukunce-hukunce.)
Tripp Lite; 1111 W. 35th Street; Chicago IL 60609; Amurka
GARGAƊI: Ya kamata mai amfani ɗaya ya kula don tantance kafin amfani da ko wannan na'urar ta dace, isasshe ko lafiya don amfanin da aka yi niyya. Tun da ɗayan aikace-aikacen ke ƙarƙashin babban bambanci, masana'anta ba su da wakilci ko garanti dangane da dacewa ko dacewa da waɗannan na'urori.
ga kowane takamaiman aikace-aikacen.
Rijistar Samfura
Ziyarci tripplite.com/warranty yau don yin rijistar sabon samfurin ku na Tripp Lite. Za a shigar da ku ta atomatik cikin zane don samun damar cin nasarar samfurin Trip Lite KYAUTA!*
* Babu siyayya dole. Wuta inda aka haramta. Wasu ƙuntatawa suna aiki. Duba webshafin don cikakkun bayanai.
WEEE Bayanin Yarda da Abokan Ciniki da Maimaitawa na Tarayyar Turai (Tarayyar Turai)
Arkashin Waste Electrical and Electronic Equipment (WEEE) Directive da aiwatar da ƙa'idodi, lokacin da abokan ciniki suka sayi sabbin kayan lantarki da lantarki daga Tripp Lite suna da haƙƙin:
- Aika tsofaffin kayan aiki don sake amfani da su akan ɗaya-da-daya, kama-da-iri (wannan ya bambanta dangane da ƙasar)
- Aika sabon kayan aiki don sake amfani da su lokacin da wannan ya zama sharar gida
Amfani da wannan kayan aiki a aikace-aikacen tallafi na rayuwa inda ake tsammanin gazawar wannan kayan aikin zai iya haifar da gazawar kayan tallafin rayuwa ko kuma yin tasiri sosai akan amincinsa ko ingancinsa ba a ba da shawarar ba.
Tripp Lite yana da manufofin ci gaba da haɓakawa. Ana iya canza ƙayyadaddun bayanai ba tare da sanarwa ba. Hotuna da zane-zane na iya bambanta dan kadan daga ainihin samfuran.
1111 W. 35th Street, Chicago, IL 60609 Amurka • tripplite.com/support
Takardu / Albarkatu
 |
TRIPP-LITE S3MT-100KWR480V S3MT-Series 3-Input Input and Output Transformers [pdf] Littafin Mai shi S3MT-100KWR480V S3MT-Series 3-Input and Output Transformers, S3MT-100KWR480V, S3MT-Series 3-Phase Input and Output Transformers |
