Allen-Bradley 1734-IV2 POINT IO Modulolin shigarwar Tushen
Bayanin samfur
Modulolin shigar da tushen POINT I/O jerin kayayyaki ne da aka tsara don siyan siginar shigarwa a cikin tsarin sarrafa kansa na masana'antu. Ana samun su a cikin lambobi daban-daban na kasida, gami da 1734-IV2, 1734-IV4, 1734-IV8, da 1734-IV8K (siffar da aka lulluɓe). A halin yanzu silsilar tana cikin sigar ta ta C.
Takaitacciyar Canje-canje:
- An sabunta IEC Amintaccen Wuri Mai Haɗari
- Amincewa da Wuri Mai Haɗari na Burtaniya da Turai
- Sabunta Yanayi na Musamman don Amintaccen Amfani
- Abubuwan da aka sabunta gabaɗaya
- Sabunta Bayanan Muhalli
- Sabunta Takaddun shaida
Wannan ɗaba'ar ta ƙunshi sabbin ko sabunta bayanai masu zuwa. Wannan jeri ya ƙunshi ingantaccen sabuntawa kawai kuma ba a yi niyya don nuna duk canje-canje ba.
| Taken | Shafi |
| An sabunta IEC Amintaccen Wuri Mai Haɗari | 3 |
| Amincewa da Wuri Mai Haɗari na Burtaniya da Turai | 4 |
| Sabunta Yanayi na Musamman don Amintaccen Amfani | 4 |
| Abubuwan da aka sabunta gabaɗaya | 12 |
| Sabunta Bayanan Muhalli | 12 |
| Sabunta Takaddun shaida | 13 |
Muhalli da Kawaye
Kayan aikin yana da Yarda da Wuri Mai Haɗari na Arewacin Amurka da Amincewar Wuri Mai Haɗari IEC. Lokacin aiki a wuri mai haɗari, dole ne a ɗora kayan aikin a cikin wani wuri mai dacewa tare da ingantattun hanyoyin wayoyi waɗanda suka dace da ka'idojin lantarki. Kayan aikin kuma yana da Yarjejeniyar Wuri Mai Haɗari na Burtaniya da Turai. An samar da yanayi na musamman don amintaccen amfani da kariya daga fitarwar lantarki.
HANKALI: An yi nufin wannan kayan aikin don amfani da shi a cikin muhallin masana'antu na Digiri na 2 na gurɓataccen gurɓata, a cikin juzu'itage Aikace-aikacen Category II (kamar yadda aka bayyana a cikin EN/IEC 60664-1), a tsayi har zuwa 2000 m (6562 ft) ba tare da lalata ba.
Wannan kayan aikin ba a yi niyya don amfani da shi a wuraren zama ba kuma maiyuwa ba zai ba da cikakkiyar kariya ga ayyukan sadarwar rediyo a cikin irin waɗannan wuraren ba. Ana ba da wannan kayan aikin azaman buɗaɗɗen kayan aiki don amfanin cikin gida. Dole ne a ɗora shi a cikin wani shingen da aka ƙera da kyau don waɗancan ƙayyadaddun yanayin muhalli waɗanda za su kasance kuma an tsara su yadda ya kamata don hana rauni na mutum wanda ke haifar da damar zuwa sassan rayuwa. Yakin dole ne ya kasance yana da kaddarorin da suka dace don hana ko rage yaɗuwar harshen wuta, tare da biyan ƙimar yaɗuwar harshen wuta na 5VA ko a yarda da aikace-aikacen idan ba ƙarfe ba. Dole ne a sami damar shiga ciki ta hanyar amfani da kayan aiki kawai. Sashe na gaba na wannan ɗaba'ar na iya ƙunsar ƙarin bayani game da takamaiman ƙididdiga nau'in shinge waɗanda ake buƙata don biyan wasu takaddun amincin samfur. Baya ga wannan ɗaba'ar, duba waɗannan abubuwa:
- Ka'idodin Waya Automation Automation na Masana'antu, bugu 1770-4.1, don ƙarin buƙatun shigarwa.
- NEMA Standard 250 da EN/IEC 60529, kamar yadda ya dace, don bayani game da matakan kariya da aka bayar ta hanyar shinge.
HANKALI: Karanta wannan daftarin aiki da takaddun da aka jera a sashin Ƙarin Albarkatun game da shigarwa, daidaitawa, da aiki na wannan kayan aiki kafin shigar, daidaitawa, sarrafa, ko kula da wannan samfur. Ana buƙatar masu amfani su san kansu da umarnin shigarwa da wayoyi ban da buƙatun duk lambobi, dokoki, da ƙa'idodi.
Ana buƙatar shigarwa, gyare-gyare, shigar da sabis, amfani, haɗawa, rarrabuwa, da kiyayewa da ƙwararrun ma'aikatan da suka dace su yi daidai da ƙa'idar aiki. Idan akwai matsala ko lalacewa, bai kamata a yi ƙoƙarin gyarawa ba. Ya kamata a mayar da tsarin zuwa ga masana'anta don gyarawa. Kar a wargaza tsarin.
Amincewa da Wuri Mai Haɗari na Arewacin Amurka
Bayanin da ke gaba yana aiki Lokacin Aiki da Wannan Kayan Aiki A Wurare masu haɗari. Kayayyakin da aka yiwa alama "CL I, DIV 2, GP A, B, C, D" sun dace don amfani a cikin Rukunin Class I Division 2 A, B, C, D, Wurare masu haɗari da wurare marasa haɗari kawai. Ana ba da kowane samfur tare da alamomi akan farantin suna mai nuni da lambar yanayin zafin wuri mai haɗari. Lokacin haɗa samfura a cikin tsarin, ƙila a yi amfani da lambar mafi ƙarancin zafin jiki (lambar “T” mafi ƙasƙanci) don taimakawa ƙayyadaddun lambar yanayin yanayin gabaɗayan tsarin. Haɗin kayan aiki a cikin tsarin ku ana ƙarƙashin bincike daga Hukumar da ke da iko a lokacin shigarwa.
GARGADI:
Hadarin fashewa
- Kar a cire haɗin kayan aiki sai dai idan an cire wuta ko kuma an san yankin ba shi da haɗari.
- Kar a cire haɗin haɗi zuwa wannan kayan aikin sai dai idan an cire wuta ko kuma an san yankin ba shi da haɗari. Kiyaye duk wani haɗin waje na waje wanda ya haɗu da wannan kayan aiki ta amfani da sukurori, latches na zamewa, masu haɗin zaren, ko wasu hanyoyin samar da wannan samfur.
- Sauya abubuwan da aka gyara na iya lalata dacewa ga Class I, Division 2.
GARGADI: Lokacin da aka yi amfani da shi a cikin Class I, Division 2, wuri mai haɗari, dole ne a ɗora wannan kayan aiki a cikin wani shinge mai dacewa tare da ingantacciyar hanyar wayoyi wanda ya dace da ka'idojin lantarki.
Amincewar Wuri Mai Haɗari IEC
Abubuwan da ke biyowa sun shafi samfuran da aka yiwa alama da takaddun IECEx:
- An yi nufin amfani da su a wuraren da iskar gas, tururi, hazo, ko iska ba zai iya faruwa ba, ko kuma zai iya faruwa ba safai ba kuma na ɗan gajeren lokaci. Irin waɗannan wuraren sun dace da rarrabuwar Yanki 2 zuwa IEC 60079-0.
- Nau'in kariyar shine Ex eC IIC T4 Gc bisa ga IEC 60079-0 da IEC 60079-7.
- Bincika ka'idoji IEC 60079-0 Abubuwan fashewa - Kashi na 0: Kayan aiki - Abubuwan buƙatu gabaɗaya, Edition 7, Ranar Bita 2017 da IEC 60079-7 ", lambar takardar shaidar IECEx IECEx UL 5.1X.
- Ana iya samun lambobi na kasida da “K” ke biye da su don nuna zaɓin suturar da ta dace.
Yarda da Wuri Mai Haɗari na Burtaniya da Turai
Mai zuwa ya shafi samfuran da aka yiwa alama II 3G:
- An yi nufin amfani da su a cikin yanayi mai yuwuwar fashewa kamar yadda tsarin UKEX 2016 No. 1107 da Dokar Tarayyar Turai 2014/34/EU suka ayyana kuma an gano su bi Mahimman Bukatun Lafiya da Tsaro waɗanda suka shafi ƙira da gina kayan aikin Category 3 da aka nufa. don amfani a cikin Yanki 2 mai yuwuwar fashewar yanayi, da aka bayar a cikin Jadawalin 1 na UKEX da Annex II na wannan Umurnin.
- An tabbatar da bin Mahimman Bukatun Kiwon lafiya da Tsaro ta hanyar bin EN IEC 60079-7, da EN IEC 60079-0.
- Rukunin Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayanka na 3, kuma suna bin Mahimman Bukatun Lafiya da Tsaro da suka shafi ƙira da gina irin waɗannan kayan aikin da aka bayar a cikin Jadawalin 1 na UKEX da Annex II na EU Directive 2014/34/EU. Duba UKEx da EU Declaration of Conformity a rok.auto/certifications don cikakkun bayanai.
- Nau'in kariyar ita ce Ex ec IIC T4 Gc bisa ga EN IEC 60079-0: 2018, ATMOSPHERES FASAHA - KASHI NA 0: KAYAN AIKI - BUKATAR JAMA'A, Ranar fitowa 07/2018, da CENELEC EN IEC 60079-7: 2015A , Fashewar yanayi. Kariyar kayan aiki ta ƙarin aminci "e".
- Daidaita daidaitattun TS EN 60079-0: 2018, ATMOSPHERES masu fashewa - Sashe na 0: Kayayyakin - Bukatun Gabaɗaya, Ranar fitowa 07/2018, da CENELEC EN IEC 60079-
7:2015+A1:2018 Fashewar yanayi. Kariyar kayan aiki ta ƙara aminci "e", lambar takardar shedar DEMKO 04 ATEX 0330347X da UL22UKEX2478X. - An yi nufin amfani da su a wuraren da iskar gas, tururi, hazo, ko iska ba zai iya faruwa ba, ko kuma zai iya faruwa ba safai ba kuma na ɗan gajeren lokaci. Irin waɗannan wuraren sun dace da rarrabuwar yankin 2 bisa ga ka'idar UKEX 2016 No. 1107 da ATEX umarnin 2014/34/EU.
- Ana iya samun lambobi na kasida da “K” ke biye da su don nuna zaɓin suturar da ta dace.
GARGADI:
- Wannan kayan aikin baya juriya ga hasken rana ko wasu tushen hasken UV.
- Wannan kayan aikin za a ɗora shi a cikin ƙayyadaddun shinge na UKEX / ATEX / IECEx 2 tare da ƙaramin ƙimar kariya ta ingress na aƙalla IP54 (daidai da EN/IEC 60079-0) kuma a yi amfani da shi a cikin yanayin da bai wuce Digiri na 2 ba kamar yadda aka ayyana a cikin EN/IEC 60664-1) lokacin da aka yi amfani da shi a cikin mahalli na Zone 2. Dole ne a sami damar shiga wurin ta amfani da kayan aiki kawai.
- Wannan kayan aikin za a yi amfani da shi a cikin ƙayyadaddun ƙimar da Rockwell Automation ya ayyana.
- Za a yi tanadi don hana ƙididdigan voltage daga wuce gona da iri ta rikice-rikice na wucin gadi na fiye da 140% na kololuwar kimar voltage lokacin da aka yi amfani da shi a cikin yankunan Zone 2.
- Za a kiyaye umarnin a cikin littafin mai amfani.
- Dole ne a yi amfani da wannan kayan aikin tare da UKEX/ATEX/IECEx bokan Rockwell Automation backplanes.
- Ana samun ƙasa ta hanyar hawan kayayyaki akan dogo.
- Za a yi amfani da na'urori a cikin muhallin da bai wuce Digiri na 2 na gurɓatawa ba.
Sharuɗɗa na Musamman don Amintaccen Amfani
HANKALI:
- An kafa wannan samfurin ta hanyar dogo na DIN zuwa ƙasan chassis. Yi amfani da tutiya plated chromate-passivated karfe DIN dogo don tabbatar da ƙasa mai kyau. Amfani da sauran kayan dogo na DIN (misaliample, aluminum ko robobi) wanda zai iya lalata, oxidize, ko kuma masu jagoranci mara kyau, na iya haifar da ƙasa mara kyau ko tsaka-tsaki. Amintaccen dogo na DIN zuwa saman hawa kusan kowane 200 mm (7.8 in.) kuma amfani da anka na ƙarshe daidai. Tabbatar da saukar da layin dogo DIN yadda ya kamata. Dubi Ka'idodin Waya Automation Automation na Masana'antu, bugu 1770-4.1, don ƙarin bayani.
- Dole ne a samar da kariya ta wucin gadi wacce aka saita a matakin da bai wuce 140% na mafi girman ƙimar vol.tage a tashoshin samar da kayan aiki.
- Kar a cire ko musanya adaftan yayin da ake amfani da wuta. Katsewar jirgin baya na iya haifar da aiki marar niyya ko motsi na inji.
- Kar a jefar da hular karshen. Yi amfani da wannan murfin ƙarshen don rufe haɗe-haɗe da aka fallasa akan tushen hawa na ƙarshe akan dogo na DIN. Rashin yin hakan na iya haifar da lalacewar kayan aiki ko rauni daga girgiza wutar lantarki.
- Idan ana amfani da wannan kayan aikin ta hanyar da masana'antun basu bayyana ba, kariyar da kayan aikin ke bayarwa na iya nakasa.
Hana Fitar Electrostatic
- HANKALI: Wannan kayan aikin yana kula da fitarwar lantarki, wanda zai iya haifar da lalacewa na ciki kuma yana shafar aiki na yau da kullun. Bi waɗannan jagororin lokacin da kuke sarrafa wannan kayan aiki:
- Taɓa ƙasan abu don fitar da yuwuwar a tsaye.
- Saka madaidaicin madaurin wuyan hannu.
- Kar a taɓa masu haɗawa ko fil akan allunan abubuwan da suka shafi abubuwa.
- Kar a taɓa abubuwan da'ira a cikin kayan aiki.
- Yi amfani da madaidaicin wurin aiki, idan akwai.
- Ajiye kayan aiki a cikin marufi mai aminci a tsaye lokacin da ba a amfani da shi.
La'akarin Tsaron Wutar Lantarki
HANKALI:
- An ba da izinin wannan kayan aikin don amfani kawai a cikin kewayon yanayin zafin iska na -20…+55 °C (-4…+131 °F). Kada a yi amfani da kayan aiki a wajen wannan kewayon.
- Yi amfani da busasshiyar kyalle mai tsauri kawai don goge kayan aiki. Kada ku yi amfani da kowane kayan tsaftacewa.
Kafin Ka Fara
Za ka iya amfani da waɗannan na'urorin shigar da C POINT I/O™ tare da na'ura Net® da adaftar PROFIBUS. Idan kana amfani da sigar aikace-aikacen Studio 5000 Logix Designer® 20 ko mafi girma, Hakanan zaka iya amfani da kayayyaki tare da adaftan ControlNet® da EtherNet/IP™. Dubi Hoto 1 don gano abubuwan waje na tsarin.
Module na shigar da POINT I/O tare da 1734-TB ko 1734-TBS Tushen
Haɗin tushe na wiring ya haɗa da tushe mai tushe, 1734-TB, ko 1734-TBS, wanda ya ƙunshi tushe mai hawa, 1734-MB, da shinge mai cirewa, 1734-RTB, ko 1734-RTBS.
| Bayani | Bayani | ||
| 1 | Tsarin kulle tsarin | 6 | 1734-TB ko 1734-TBS hawa tushe |
| 2 | Alamar rubutu mai zamewa | 7 | Yankan gefe masu tsaka |
| 3 | I/O module mai sakawa | 8 | Maɓallin injina (orange) |
| 4 | Hannun tasha mai cirewa (RTB). | 9 | DIN dogo kulle dunƙule (orange) |
| 5 | Tushe mai cirewa tare da dunƙule (1734-RTB) ko bazara clamp (1734-RTBS) | 10 | Zane-zane na wayoyi |
Tsarin shigarwa ya ƙunshi matakai da yawa:
- Shigar da Dutsen Ginin
- Shigar da Module
- Shigar da Tashar Tashar Mai Cire
- Cire Tushen Dutsen
- Waya Module
- Sadarwa tare da Module
- Ma'anar Fassara Matsayi
Ƙayyadaddun bayanai
Ƙayyadaddun samfurin sun haɗa da cikakkun bayanai game da fasalulluka na kayan aiki, iyawarsu, da aikinsu. Koma zuwa littafin mai amfani don ƙarin bayani.
Modules Input Tushen I/O - 1734-IV2, 1734-IV4, 1734-IV8, 1734-IV8K
| Siffa | 1734-IV2 | 1734-IV4 | 1734-IV8, 1734-IV8K |
| Adadin abubuwan shigarwa, samo asali | 2 (1 rukuni na 2) | 4 (1 rukuni na 4) | 8 (1 rukuni na 8) |
| Voltage, kan-jihar Min Noma Max |
10V DC 24V DC 28.8V DC |
||
| Yanzu, kan-jihar Min Noma Max |
2 mA 4mA @ 24V DC 5 mA |
||
| Voltage, kashe-jihar, max | 5V DC | ||
| Yanzu, waje, min | 1.5 mA | ||
| Impedance, shigarwa, Nom Max |
3.6 kΩ 4.7 kΩ |
||
| Lokacin tacewa(1) Kashe Zuwa Kunnawa Kunna zuwa Kashe |
0.5 hardware da 0…63 ms (zaɓi mai amfani) 0.5 hardware da 0…63 ms (zaɓi mai amfani) |
||
| Ƙarshen wayoyi na filin | 0 - Shigarwa 0 1- Gabatarwa 1 2 - Babu haɗin kai 3 - Babu haɗin kai 4 – Na kowa 5 – Na kowa 6 - Samar da mai amfani 7 - Samar da mai amfani |
0 - Shigarwa 0 1- Gabatarwa 1 2 - Shigarwa 2 3 - Shigarwa 3 4 – Na kowa 5 – Na kowa 6 - Samar da mai amfani 7 - Samar da mai amfani |
0 - Shigarwa 0 1- Gabatarwa 1 2 - Shigarwa 2 3 - Shigarwa 3 4 - Shigarwa 4 5 - Shigarwa 5 6 - Shigarwa 6 7 - Shigarwa 7 |
- Lokacin Kashe-zuwa-Anawa shigarwa shine lokacin daga ingantacciyar siginar shigarwa zuwa fitarwa ta tsarin. Lokacin Kunnawa-zuwa-Kashewa shine lokacin daga ingantacciyar siginar shigarwa zuwa fitarwa ta tsarin.
Gabaɗaya Bayani
| Siffa | 1734-IV2 | 1734-IV4 | 1734-IV8, 1734-IV8K |
| Matsakaicin karfin juzu'i na tushe | 0.8 N•m (7 lb•in) | ||
| Manuniya | 1 kore/ja – alamar matsayi na module, gefen dabaru 1 kore/ja – mai nuna matsayin cibiyar sadarwa, gefen dabaru | ||
| 2 rawaya – alamomin halin shigarwa, gefen dabaru | 4 rawaya – alamomin halin shigarwa, gefen dabaru | 8 rawaya – alamomin halin shigarwa, gefen dabaru | |
| Module wurin | 1734-TB ko 1734-TBS wayoyi tushe taro | ||
| POINT Bus™ na yanzu, max | 75mA @ 5V DC | ||
| Rashin wutar lantarki, max | 0.7W @ 28.8V DC | 1.0W @ 28.8V DC | 1.6W @ 28.8V DC |
| Rushewar thermal, max | 2.4 BTU/h @ 28.8V DC | 3.4 BTU/h @ 28.8V DC | 5.5 BTU/h @ 28.8V DC |
| Kadaici voltage | 50V ci gaba An gwada don jure wa 2500V DC na 60 s |
||
| Samar da wutar lantarkin filin voltage, ba Voltage kewayon | 24V DC 10V DC wuta |
||
| Girma, kimanin (H x W x D) | 56 x 12 x 75.5 mm (2.21 x 0.47 x 2.97 in.) |
||
| Kashi na wayoyi(1) | 2- akan tashoshin sigina | ||
| Girman waya | 0.25 mm2 (22…14 AWG) ƙwanƙwasa ko madaidaicin garkuwar waya ta jan ƙarfe wanda aka ƙididdige shi a 75 °C (167 °F) ko mafi girma 1.2 mm (3/64 in.) max | ||
| Nauyi, kimanin. | 31.2 g (1.10 oz) | 31.8 g (1.12 oz) | 32.3 g (1.14 oz) |
| Ƙididdiga nau'in shinge | Babu (buɗaɗɗen salo) | ||
| Lambar yanayi ta Arewacin Amurka | T4A | ||
| IECEx temp code | T4 | – | |
| UKEX/ATEX lambar temp | T4 | – | |
| Matsayin canza maɓalli | 1 | ||
- Yi amfani da wannan bayanin Rukunin Gudanarwa don tsara tsarin tafiyar jagora kamar yadda aka bayyana a cikin Jagorar shigar da matakin da ya dace. Hakanan duba Jagorar Waya Automation na Masana'antu da Grounding, bugu 1770-4.1, don ƙarin bayani.
Ƙayyadaddun Muhalli
| Siffa | Daraja |
| Zazzabi, aiki | IEC 60068-2-1 (Ad Gwajin, sanyi mai aiki), IEC 60068-2-2 (Gwajin Bd, aiki bushe zafi), IEC 60068-2-14 (Gwajin Nb, girgiza zafin zafi): -20°C ≤ Ta ≤ +55°C (-4°F ≤ Ta ≤ + 131°F) |
| Zazzabi, ajiya | IEC 60068-2-1 (Gwajin Ab, sanyi mara fakitin mara aiki), IEC 60068-2-2 (Gwajin Bb, busassun zafi mara fakiti) IEC 60068-2-14 (Gwajin Na, ba tare da fakitin zafin zafi ba): -40…+85°C (-40…+185°F) |
| Zazzabi, kewaye da iska, max | 55°C (131°F) |
| Dangi zafi | IEC 60068-2-30 (Gwajin Db, wanda ba a kunshe da damp zafi): 5…95% rashin kwanciyar hankali |
| Jijjiga | IEC60068-2-6 (Gwajin Fc, aiki): 5g @ 10…500 Hz |
| Shock, aiki | IEC 60068-2-27 (Gwajin Ea, girgiza da ba a kunshe): 30g |
| Shock, rashin aiki | 50g ku |
| Fitarwa | Saukewa: IEC61000-6-4 |
| ESD rigakafi | IEC6100-4-2: 6kV lamba fitarwa 8 kV iska fitarwa |
| Radiated RF rigakafi | IEC 61000-4-3: 10V/m tare da 1 kHz sine-wave 80% AM daga 80… 6000 MHz |
| EFT/B rigakafi | IEC 61000-4-4: ± 2 kV a 5 kHz akan tashoshin wutar lantarki ± 2 kV a 5 kHz akan tashoshin sigina |
| Rashin rigakafi na wucin gadi | IEC 61000-4-5: ± 1 kV layin layi (DM) da ± 2 kV layin-duniya (CM) akan tashoshin sigina |
| An gudanar da rigakafin RF | IEC61000-4-6: 10V rms tare da 1 kHz sine-wave 80% AM daga 150 kHz… 80 MHz |
Umarnin Shigarwa:
Kafin shigarwa, daidaitawa, ko aiwatar da gyare-gyare akan samfurin, karanta littafin mai amfani da sauran takaddun da aka jera dangane da shigarwa, daidaitawa, da aiki. Dole ne kuma masu amfani su bi ƙa'idodi, lambobi, da ƙa'idodi. Tabbatar cewa ana amfani da kayan aiki kamar yadda mai ƙira ya ƙayyade don tabbatar da aiki mai kyau da kariya. Don takamaiman umarnin shigarwa, koma zuwa Hoto 1 a cikin littafin jagorar mai amfani. Haɗin tushe na wiring ya ƙunshi tushe mai tushe (1734-TB ko 1734-TBS), tushe mai hawa (1734-MB), da shinge mai cirewa (1734-RTB ko 1734-RTBS). Koma zuwa littafin mai amfani don cikakkun bayanai na abubuwan da aka haɗa da ayyukansu.
POINT I/O Modulolin Shigarwar Tushen
Catalog Numbers 1734-IV2, 1734-IV4, 1734-IV8, 1734-IV8K, Series C Lambobin katalogin tare da kari 'K' suna da rufaffiyar tsari kuma ƙayyadaddun su iri ɗaya ne da kasidar masu rufaffiyar tsari.
| Taken | Shafi |
| Takaitacciyar Canje-canje | 1 |
| Kafin Ka Fara | 5 |
| Shigar da Dutsen Ginin | 5 |
| Shigar da Module | 5 |
| Shigar da Tashar Tashar Mai Cire | 6 |
| Cire Tushen Dutsen | 7 |
| Waya Module | 7 |
| Sadarwa tare da Module | 10 |
| Ma'anar Fassara Matsayi | 10 |
| Ƙayyadaddun bayanai | 11 |
HANKALI: Karanta wannan daftarin aiki da takaddun da aka jera a sashin Ƙarin Albarkatun game da shigarwa, daidaitawa da aiki na wannan kayan aiki kafin shigar, daidaitawa, sarrafa ko kula da wannan samfur. Ana buƙatar masu amfani su san kansu da umarnin shigarwa da wayoyi ban da buƙatun duk lambobi, dokoki, da ƙa'idodi.
Ayyukan da suka haɗa da shigarwa, gyare-gyare, sakawa cikin sabis, amfani, taro, rarrabuwa, da kiyayewa ana buƙatar ma'aikatan da suka dace da horarwa su aiwatar da su daidai da ƙa'idar aiki. Idan an yi amfani da wannan kayan aikin ta hanyar da masana'anta ba su kayyade ba, kariya ta kayan aikin na iya lalacewa.
Shigar da Dutsen Ginin
Don shigar da tushe mai hawa akan dogo na DIN, ci gaba kamar haka:
- Sanya tushe mai hawa a tsaye sama da raka'o'in da aka shigar (adaftar, wutar lantarki, ko tsarin da ke akwai).
- Zamar da gindin hawa zuwa ƙasa yana ƙyale ɓangarorin ɓangarorin da suka haɗa juna don haɗa madaidaicin module ko adaftar.
- Latsa da ƙarfi don zaunar da gindin hawa akan dogo na DIN. Tushen hawa yana shiga cikin wuri. Tabbatar cewa dunƙule DIN dogo na orange yana cikin matsayi a kwance kuma ya tsunduma cikin layin dogo na DIN.
Shigar da Module
Za a iya shigar da tsarin kafin ko bayan shigarwa na tushe. Tabbatar cewa an sanya maɓalli daidai kafin shigar da tsarin a cikin gindin hawa. Bugu da kari, tabbatar da cewa dunƙule tushe mai hawa yana matsayi a kwance ana nuni da tushe.
HANKALI: Lokacin da kuka saka ko cire samfurin yayin da wutar jirgin baya ke kunne, baka na lantarki na iya faruwa. Wannan zai iya haifar da fashewa a cikin ma'auni na wurare masu haɗari.
Tabbatar cewa an cire wutar lantarki ko kuma wurin ba shi da haɗari kafin a ci gaba. Maimaita harbin wutar lantarki yana haifar da wuce gona da iri ga lambobi a kan ma'auni da mahaɗin sa. Lambobin da suka sata na iya haifar da juriya na lantarki wanda zai iya shafar aikin ƙirar.
- Yin amfani da screwdriver mai wutsiya, juya maɓallin maɓalli a kan gindin mai hawa agogon hannu har sai adadin da ake buƙata don nau'in ƙirar da ake shigar ya yi daidai da ƙima a gindin.
- Tabbatar cewa DIN dogo kulle dunƙule yana cikin matsayi a kwance. Ba za ku iya saka tsarin ba idan an buɗe tsarin kullewa.
- Saka samfurin kai tsaye zuwa cikin gindin hawa.
- Latsa don tsaro. Module ɗin yana kulle cikin wuri.
HANKALI: Kar a jefar da hular karshen. Yi amfani da wannan murfin ƙarshen don rufe haɗe-haɗe da aka fallasa akan tushen hawa na ƙarshe akan dogo na DIN. Rashin yin hakan na iya haifar da lalacewar kayan aiki ko rauni daga girgiza wutar lantarki.
Shigar da Tashar Tashar Mai Cire
Ana ba da Toshewar Tasha Mai Cire (RTB) tare da taron tushe na wayoyi. Don cirewa, ɗaga hannun RTB. Wannan yana ba da damar cire tushe mai hawa kuma a maye gurbinsu kamar yadda ya cancanta ba tare da cire kowane daga cikin wayoyi ba. Don sake shigar da Tushen Tasha Mai Cirewa, ci gaba kamar haka.
GARGADI: Lokacin da kuka haɗa ko cire haɗin Tashar Tashar Mai Cirewa (RTB) tare da amfani da ikon gefen filin, baka na lantarki na iya faruwa. Wannan na iya haifar da fashewa a cikin ma'auni na wurare masu haɗari.
Tabbatar cewa an cire wuta ko kuma yankin ba shi da haɗari kafin a ci gaba.
- Saka ƙarshen kishiyar hannun a cikin rukunin tushe. Wannan ƙarshen yana da sashe mai lanƙwasa wanda ke hulɗa tare da tushen wayoyi.
- Juya katangar tasha zuwa ginshiƙin wayoyi har sai ta kulle kanta a wuri.
- Idan an shigar da tsarin I/O, ƙwace riƙon RTB cikin wuri akan tsarin.
GARGADI: Don 1734-RTBS da 1734-RTB3S, don ɗaki da buɗe waya, saka screwdriver (lambar katalogi 1492-N90 - 3 mm diamita ruwa) a cikin buɗewa a kusan 73 ° (bangaren ruwa yana layi ɗaya da saman saman buɗewa). ) da turawa sama a hankali.
GARGADI: Don 1734-TOPS da 1734-TOP3S, don kwancewa da kwance waya, saka screwdriver mai laushi (lambar kasida 1492-N90 - diamita 3 mm) a cikin buɗewa a kusan 97 ° (bangaren ruwa yana layi ɗaya da saman saman buɗewa) kuma danna ciki (kada a tura sama ko ƙasa).
Cire Tushen Dutsen
Don cire tushe mai hawa, dole ne ka cire duk wani tsarin da aka shigar da tsarin da aka shigar a cikin tushe zuwa dama. Cire toshe mai cirewa, idan an haɗa shi.
- Cire hannun RTB akan tsarin I/O.
- Ja hannun RTB don cire katangar tasha mai ciruwa.
- Latsa makullin module a saman tsarin.
- Ja kan tsarin I/O don cirewa daga tushe.
- Maimaita matakai na 1, 2, 3 da 4 don ƙirar dama.
- Yi amfani da ƙaramin screwdriver mai wutsiya don jujjuya dunƙule tushen lemu zuwa matsayi na tsaye. Wannan yana sakin tsarin kullewa.
- Ɗaga kai tsaye don cirewa.
Waya Module
Don waya da tsarin, duba zane-zane da teburi.
Input = 0 da 1
NC = Babu haɗin kai (2 da 3)
C = Na kowa (4 da 5)
V = Kayayyaki (6 da 7)
Shigar da 0, 1, 2, da 3
C = Na kowa (4 da 5)
V = Kayayyaki (6 da 7)
Shigar da 0, 1, 2, 3, 4, 5, 6, da 7
Lura: V da C an ɗaure daisy daga ko dai adaftan, 1734-FPD, 1734-EP24DC, ko kuma daga toshe tasha mai amfani da aka kawo.
GARGADI: Idan kun haɗa ko cire haɗin wayoyi yayin da wutar gefen filin ke kunne, baka na lantarki na iya faruwa. Wannan zai iya haifar da fashewa a cikin ma'auni na wurare masu haɗari. Tabbatar cewa an cire wuta ko kuma yankin ba shi da haɗari kafin a ci gaba.
POINT I/O Tushen Input Module Wiring - 1734-IV2
C = gama gari
V = 12/24V DC wadata
Lura: Ba a kiyaye shi ba, 0.3A max
| Tashoshi | Shigarwa Tasha | Na kowa Tasha | Ƙarfi |
| 0 | 0 | 4 | 6 |
| 1 | 1 | 5 | 7 |
Haɗa wuta akan maɓallan kusancin waya 3.
Ana samar da 12/24V DC ta bas ɗin wutar lantarki na ciki.
POINT I/O Tushen Input Module Wiring - 1734-IV4
C = gama gari
V = 12/24V DC wadata
Lura: Ba a kiyaye shi ba, 0.3A max
| Tashoshi | Shigarwa Tasha | Na kowa Tasha | Ƙarfi |
| 0 | 0 | 4 | 6 |
| 1 | 1 | 5 | 7 |
| 2 | 2 | 4 | 6 |
| 3 | 3 | 5 | 7 |
Haɗa wuta akan maɓallan kusancin waya 3.
Ana samar da 12/24V DC ta bas ɗin wutar lantarki na ciki.
POINT I/O Tushen Input Module Wiring - 1734-IV8, 1734-IV8K
C = gama gari
V = 12/24V DC wadata
| Tashoshi | Shigarwa Tasha | Tashoshi | Shigarwa Tasha |
| 0 | 0 | 4 | 4 |
| 1 | 1 | 5 | 5 |
| 2 | 2 | 6 | 6 |
| 3 | 3 | 7 | 7 |
Sarkar Daisy gama gari da haɗin wutar lantarki daga adaftar 1734, 1734-FPD, 1734-EP24DC, ko daga toshe tasha na taimakon waje mai amfani da aka kawo.
Wayoyi Example na 1734-IV8, 1734-IV8K Amfani da 2-Wire Proximity Switches
Katanga tasha tare da tsiri mai haɗa bas
Wayoyi Example na 1734-IV8, 1734-IV8K Amfani da 3-Wire Proximity Switches
Sadarwa tare da Module
POINT I/O modules aika (samar) da karɓar (cinye) bayanan I/O (saƙonni). Kuna taswirar wannan bayanan a cikin ƙwaƙwalwar ajiyar mai sarrafawa.
Abubuwan 1734-IV2, 1734-IB4, da 1734-IV8 suna samar da 1 byte na bayanan shigarwa (Scanner Rx). Modulolin ba sa cinye bayanan I/O (scanner Tx).
Girman saƙo: 1 Byte
| 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | |
| Yana samarwa (Rx) | I1 | I0 | ||||||
| Amfani (Tx) | Babu bayanan da aka cinye | |||||||
Ma'anar Fassara Matsayi
Dubi Hoto na 7 da Tebu 1 don bayani kan yadda ake fassara alamomin matsayi.
Alamun Matsayi don POINT I/O 2 Fitowar Yanzu da 2 Voltage Output Analog Modules
Matsayin Nuni don Moduloli
| Matsayi | Bayani | |
|
Matsayin tsarin |
Kashe | Babu wutar lantarki da aka yi amfani da na'urar. |
| Kore | Na'urar tana aiki kullum. | |
| Koren walƙiya | Na'urar tana buƙatar ƙaddamarwa saboda ɓacewa, rashin cikawa, ko daidaitaccen tsari. | |
| Ja mai walƙiya | Laifin mai warkewa. | |
| Ja | Laifin da ba a iya murmurewa - na iya buƙatar maye gurbin na'urar. | |
| Ja/kore mai walƙiya | Na'urar tana cikin yanayin gwajin kai. | |
| Matsayin hanyar sadarwa | Kashe | Na'urar ba ta kan layi ba:
|
| Koren walƙiya | Na'urar tana kan layi amma ba ta da haɗin kai a cikin kafaffen jihar. | |
| Kore | Na'urar tana kan layi kuma tana da haɗin gwiwa a cikin kafuwar jihar. | |
| Ja mai walƙiya | Haɗin I/O ɗaya ko fiye suna cikin ƙayyadaddun lokaci. | |
| Ja | Rashin gazawar hanyar haɗin kai - gazawar na'urar sadarwa. Na'urar ta gano kuskuren da ke hana shi sadarwa akan hanyar sadarwa. | |
| Ja/kore mai walƙiya | Na'urar sadarwa mara kyau - na'urar ta gano kuskuren samun damar hanyar sadarwa kuma tana cikin matsalar sadarwa. Na'urar ta karɓi kuma ta karɓi Buƙatun Lalacewar Sadarwar Identity - dogon saƙon yarjejeniya. | |
| Matsayin tashar | Kashe | Ana shigar da shi a cikin Jihar Kashe. |
| Yellow | Ana shigar da shi a cikin Kunnawa. |
Takaddun shaida
| Takaddun shaida (Lokacin da Samfura Is Alama)(1) | Daraja |
| c-UL-mu | UL Jerin Kayan Kayan Aikin Masana'antu, wanda aka ba da izini ga Amurka da Kanada. Duba UL File E65584. UL da aka jera don Class I, Rukuni na 2 A, B, C, D wurare masu haɗari, ƙwararrun Amurka da Kanada. Duba UL File E194810. |
| UK da CE | Kayayyakin Dokokin Burtaniya 2016 No. 1091 da Tarayyar Turai 2014/30/EU EMC Umarnin, mai yarda da: EN 61326-1; Aunawa / Sarrafa / Amfani da dakin gwaje-gwaje, Buƙatun masana'antu EN 61000-6-2; Kariyar masana'antu EN 61000-6-4; Fitar masana'antu TS EN 61131-2; Masu Gudanar da Shirye-shiryen (Sashe na 8, Yanki A & B) Kayayyakin Dokokin Burtaniya 2012 No. 3032 da Tarayyar Turai 2011/65/EU RoHS, mai yarda da: EN IEC 63000; Takardun fasaha |
| Ex | Domin 1734-IV2 kuma 1734-IV4 kawai Kayayyakin Dokokin Burtaniya 2016 No. 1107 da Jagoran Tarayyar Turai 2014/34/EU ATEX, mai dacewa da: EN IEC 60079-0; Gabaɗaya Bukatun EN IEC 60079-7; Halaye masu fashewa, Kariya "e" II 3 G Ex ec IIC T4 Gc DEMKO 04 ATEX 0330347X UL22UKEX2478X |
| IECEx | Domin 1734-IV2 kuma 1734-IV4 kawai Tsarin IECEx, mai dacewa da: IEC 60079-0; Gabaɗaya Bukatun IEC 60079-7; Halaye masu fashewa, Kariya "e" II 3 G Ex ec IIC T4 Gc IECEx UL 20.0072 |
| KC | Rijistar Koriya na Kayan Watsa Labarai da Kayan Sadarwa, wanda ya dace da: Mataki na 58-2 na Dokar Waves Radio, Sashe na 3 |
| RCAIM | Dokar Sadarwa ta Ostiraliya, mai yarda da: AS/NZS CISPR 11; Fitar masana'antu. |
| Maroko | Arrêté ministériel n° 6404-15 du 29 ramadan 1436 |
| CCC | Domin 1734-IV2 kuma 1734-IV4 kawai CNCA-C23-01 䔂ⵖ䚍❡ㅷ雩霆㹊倶錞ⴭ 旘歏孞 CNCA-C23-01 CCC Dokokin Aiwatar da Fashe-Tabbacin Samfuran Lantarki CCC: 2020122309111607 |
| KOWANE | Ƙungiyar Kwastam ta Rasha TR CU 020/2011 EMC Dokokin Fasaha |
- Duba hanyar haɗin Takaddar Samfur a rok.auto/certifications don Sanarwa na Daidaitawa, Takaddun shaida, da sauran bayanan takaddun shaida.
Tallafin Automation na Rockwell
Yi amfani da waɗannan albarkatun don samun damar bayanan tallafi.
| Na fasaha Taimako Cibiyar | Nemo taimako tare da yadda ake yin bidiyo, FAQs, taɗi, dandalin masu amfani, Ilimi, da sabunta sanarwar samfur. | rok.auto/support |
| Fasaha na cikin gida Taimako Waya Lambobi | Nemo lambar tarho don ƙasar ku. | rok.auto/phonesupport |
| Na fasaha Takaddun bayanai Cibiyar | Shiga cikin sauri da zazzage ƙayyadaddun fasaha, umarnin shigarwa, da littattafan mai amfani. | rok.auto/techdocs |
| Adabi Laburare | Nemo umarnin shigarwa, littattafai, ƙasidu, da wallafe-wallafen bayanan fasaha. | rok.auto/literature |
| Samfura Daidaituwa kuma Zazzagewa Cibiyar (PCDC) | Zazzage firmware, hade files (kamar AOP, EDS, da DTM), da samun damar bayanin bayanan sakin samfur. | rok.auto/pcdc |
Bayanin Takardu
Bayanin ku yana taimaka mana samar da buƙatun takaddun ku mafi kyau. Idan kuna da wasu shawarwari kan yadda ake inganta abubuwan mu, cika fom ɗin a rok.auto/docfeedback.
Waste Electric and Electronic Equipment (WEEE)
- A ƙarshen rayuwa, ya kamata a tattara wannan kayan aiki daban daga duk wani sharar gida da ba a ware ba.
Rockwell Automation yana kula da bayanan yarda da muhalli na yanzu akan sa websaiti a rok.auto/pec.
Allen-Bradley, faɗaɗa yuwuwar ɗan adam, FactoryTalk, POINT I/O, POINTBus, Rockwell Automation, Studio 5000 Logix Designer, da TechConnect alamun kasuwanci ne na Rockwell Automation, Inc. ControlNet, DeviceNet, da EtherNet/IP alamun kasuwanci ne na ODVA, Inc. Alamomin kasuwanci da ba na Rockwell Automation mallakin kamfanoninsu ne. Buga 1734-IN052H-EN-E - Satumba 2022 | Babban Bugawa 1734-IN052G-EN-E - Janairu 2021
Haƙƙin mallaka © 2022 Rockwell Automation, Inc. Duk haƙƙin mallaka.
Takardu / Albarkatu
 |
Allen-Bradley 1734-IV2 POINT IO Modulolin shigarwar Tushen [pdf] Jagoran Jagora 1734-IV2, 1734-IV4, 1734-IV8, 1734-IV8K, 1734-IV2 POINT IO Source Input Modules, 1734-IV2, POINT IO Source Input Modules, IO Source Input Modules, Modules Input Modules |
