LEADFAN manufacturers aftermarket car audio solutions, specializing in double-din stereo receivers and multimedia head units compatible with Apple CarPlay and Android Auto.
LEADFAN is a provider of automotive electronics, focusing primarily on upgrading in-vehicle entertainment and navigation systems. The brand offers a diverse range of car stereo head units designed to replace factory radios with modern, high-definition touchscreen displays. Their product lineup includes both universal double-din receivers and vehicle-specific models tailored for brands such as Honda, BMW, Volkswagen, and Toyota.
Key features of LEADFAN products include seamless smartphone integration via Apple CarPlay and Android Auto, allowing drivers to access navigation, music, and messaging safely while driving. Many utilizing units also support Bluetooth connectivity for hands-free calling and audio streaming, MirrorLink functionality, and inputs for backup cameras and dash cams. LEADFAN aims to provide accessible technology upgrades for older vehicles, ensuring drivers can enjoy modern convenience and safety features.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Before installing, connect the red and yellow wires to the positive pole of the car battery and the black wire to the negative pole. Wait 10 seconds and press the power button to ensure it boots normally.
This usually happens if the yellow (battery memory) and red (ignition) wires are swapped. Ensure the yellow wire is connected to a constant 12V power source to maintain memory.
The default pairing PIN code for Bluetooth connection is typically '0000'.
Connect the camera's power to the reverse light positive, the video cable to the CAM-IN port, and the trigger wire (often pink or brown) to the reverse detection line on the harness.
Check that speaker wires are not grounded or shorting out against each other. Ensure the wiring colors match the standard ISO diagram (White/Gray for front, Green/Purple for rear).