Leadfan Car LCD Display User Manual

Leadfan-logo

Leadfan Car LCD Display

Leadfan-Car-LCD-Display-product

BASIC PARAMETERS

Operating Voltage DC12V
Maximum Current 15A
Operating Temperature 14 ~ +140°F / -10 ~ +60°C
Screen Size 7 Inch
Screen Resolution 1024*600
Output Power 60Wx4
Bluetooth Function Version:4.0 Password:0000
Support Video Format RM/RMVB/AVI/MP4/MKV/3GP
Support Audio Format MP3/WMA/WAV/APE/FLAC
Support Picture Format JPG
Button Light Colorful light automatic / Monochrome light optional
Radio Frequency FM 87.5~108MHz
Support media devices USB 2.0/TF card
AUX Input Front panel 3.5mm interface
Reverse Function Support (camera option)
Remote Control Infrared remote control
 Language Selection English/Chinese/Indonesian/German/Russian/Spanish/French/Italian/Thai Arab/Ukraine/Portugal/Czech Republic
Steering Wheel Controls Support

This car LCD display is compatible with most mainstreamvehiclemodels, used for information display and operation of the central control system. It features high-definition display, sensitive touch control, temperature resistance, shock resistance and low power consumption, which can stably present navigation, audio-visual, Bluetooth, vehiclestatus and other information, improving the in-car entertainment andcontrol experience. Installation: Turn off the vehicle and disconnect the power, removethe original central control panel, connect the corresponding wiringharness and fix the display, reset the panel and power on for testingtoensure normal display and touch control. Recommended installationenvironment: -20℃~70℃, avoiding humidity, dust and strongelectromagnetic interference.

BEFORE INSTALLATION

Thank you very much for purchasing and using our products, when you receive the product, please do not take the product directly to the car for installation, because the product is in the after a long journey it may affect the product. Please try the machine before installing.

Test method: Take the machine to the battery of the car and test it. This car stereo applies to a power supply voltage at 12V DC, connect the red and yellow wire of the power cord together and connect it to the positive pole of the battery. The black wire of the power cord is connected to the negative pole of the battery. Wait for 10 seconds after connecting, press each button of the machine to see if the machine can boot normally. If it can be turned on, it means there is no problem, you can install it. If the test machine can not start normally, confirm that you follow the steps of our test method in strict accordance with the operation. If the problem is still not solved, please contact us.

Attentions:

  • Do not drop the metal objects into the radio.
  • If there is smoke or smell on the radio, turn off the power at once.
  • Do not make the radio fall or have a strong collision.
  • Do not install the radio in place of strong sunlight, high temperature, high humidity or dusty.
  • Replace the fuse with the same specification. If you are using a different one, it may cause failure of the radio.
  • In order to prevent short circuit, please pull out the power wire when you replace the fuse.
  • Do not get the radio wet when washing your car. This may cause a short circuit, fire or other failure.

INSTALLTION

Leadfan-Car-LCD-Display- (1)

Note: Please connect the wires as instruction show, otherwise the machine can’t be turned on or occur some other problems. If the yellow line is connected to the wrong place, the radio will still be turned on, but the memory will be erased every time you turn it off.

Leadfan-Car-LCD-Display- (2)

Leadfan-Car-LCD-Display- (3)

MAIN INTERFACE

  1. HOME: Display the top menu screen.
  2. Volume: Adjust the volume, from 0 to 40.
  3. Light: Turn on, dim the light and turn off.
  4. Return: Return to the previous screen.
  5. Time Display: You can click here to set the time
  6. Currently Used Mode:Can switch/pause
  7. Radio: Enter the radio mode to listen to the radio station.
  8. BT: Enter the Bluetooth call interface.
  9. Setup: Enter the system setting interface.
  10. USB: Plug your USB driver to the port, then touch the USB icon to enter the USB playback mode.
  11. SD: Insert Micro SD to the port, it can play Music/Video/ Pictures from the card
  12. Phonelink: CarPlay/Android Auto and mirrorlink function. Inserting the data cable uses the mirrorlink function by default. Click ‘Phonelink’ to switch to CarPlay/Android Auto function supports voice control.
  13. AV in: Enter the AV IN external audio mode interface.
  14. Wallpaper Settings

Leadfan-Car-LCD-Display- (1)

RADIO

1 The area of the stored station. Can store stations. When you need to listen to a certain fixed station, just click it.
2/3 Press to search for radio stations, short press will step 0.05MHz, long press will change automatically.
4 Switch band FM1-FM2-FM3.
5 Automatically search for radio stations in the full frequency band and store them.
6 Long-range/short-range broadcast.
7 Mono / Stereo switch.
8 Automatically browse each station for 5 seconds.

Leadfan-Car-LCD-Display- (2)

MUSIC Leadfan-Car-LCD-Display- (3)

PHOTO Leadfan-Car-LCD-Display- (3)

BLUETOOTH

1 Make a call
2 Contact Book
3 Call record
4 Bluetooth music
5 Bluetooth pairing
6 Previous song
7 Play/Pause
8 Next song

Leadfan-Car-LCD-Display- (5)

Device name : ‘CAR KIT’ PIN: ‘0000’

Connecting Method:

  1. Turn on the car stereo and make it discoverable
  2. On your phone, tap settings-Bluetooth, choose the device name to pair it

SETTING

1 Setting
2 Sound effect setting
3 Brightness adjustment
4 Time setting
5 Wallpaper
6 Steering wheel control

Leadfan-Car-LCD-Display- (6)

  • Language: English/Chinese/Spanish/Portuguese/Russian/Italian /German/French/ Turkish/ Czech/ Thai/ Polish
  • Beep: On/Off
  • Key Light: You can change the LED Light to seven colors, White/Purple/Cyan/Yellow/Red/Blue/Green or auto.
  • Reversing Mtue: On/Off

Phonelink
Leadfan-Car-LCD-Display- (7) Please use the original data cable for avoiding disconnecting, and also can charge your phone in the same time.

1 Phone link for Android
2 Android Auto
3 Phone link for iPhone
4 Apple CarPlay

Leadfan-Car-LCD-Display- (8)NOTE:

  • Phone link for iPhone: When the phone pops up a dialog box: Trust This Computer? Select Trust to enter the interconnect mode.
  • Phone link for Android: Find “Developer options”, and click Go to find “USB debugging” and turn this feature on.
  • CarPlay/Android Auto and mirrorlink function. Inserting the data cable uses the mirrorlink function by default. Click ‘Phonelink’ to switch to CarPlay/Android Auto function supports voice control.

Apple CarPlay

  1. Connect the iPhone and the machine with a USB original data cable.
  2. Then the machine will automatically enter the CarPlay interface.
  3. After exiting,can press Phonelink on the homepage to enter the CarPlayLeadfan-Car-LCD-Display- (9)

Android Auto

  1. Download and install ‘Android auto’ software in ‘Google Play’.
  2. A mobile phone with Android 5.0 or higher. Must use a valid data cable connection.
  3. Open the Android auto software on the phone.
  4. After the connection is successful, you can use the functions provided by Android auto.

Leadfan-Car-LCD-Display- (10)

Remote Controller

  1. Power onloff
  2. Modo
  3. Switch for USB/SD
  4. Automatic Channel Search/Band Switch
  5. Menu
  6. Next Track
  7. Volume +
  8. Answer Call
  9. End Call
  10. Previous Track
  11. Volume –
  12. Enter:Play!Pause
  13. Sound Effect Mode Selection

Leadfan-Car-LCD-Display- (11)

NOTE: Battery is not included, please insert one before use.

Reversing Camera
This car stereo with backup camera included a HD, 170° ultra-wide viewing angle, and IP67 waterproof backup camera with night vision, will automatically switch to reverse image when in reversing, which makes your daily reversing safer and easier.Leadfan-Car-LCD-Display- (12)

UNIT INSTALLATION SIZE

Leadfan-Car-LCD-Display- (13)

Operation

It lights up automatically when the vehicle starts, supports touch/original vehicle key control, and can switch functions suchas navigation and audio-visual. The brightness can automatically adapt toambient light or be adjusted manually. In case of black screen or distortedscreen, restart the vehicle to troubleshoot; if the fault persists, contact after-sales service.

Maintenance & Precautions

Clean the screen with a lint-freesoft cloth dipped in clean water; do not use chemical solvents. Avoid scratching with sharp objects and impact with hard objects. Professional installation is required; non-professionals are not allowed to disassemble. Do not focus on operation while driving to ensure safety .

Documents / Resources

PDF thumbnailCar LCD Display
User Manual · Car LCD Display, LCD Display, Car Display

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.