1. Product Overview
This manual provides instructions for the Leadfan Car Radio, designed specifically for Toyota Camry models from 2002 to 2006. This unit features an Android 11 operating system, a 4-core processor, and 2GB RAM with 32GB ROM, ensuring smooth operation and ample storage for applications. The 9-inch touchscreen offers a clear and interactive user experience.
Important Compatibility Note: This car radio is NOT suitable for vehicles equipped with JBL/BO-SE premium audio systems, original factory cameras, OEM cameras, or vehicles with a pre-existing large screen. Please verify your car's model, year, and center console configuration before installation.
2. Package Contents
Before beginning installation, ensure all components listed below are present in your package:
- Leadfan Car Radio Unit (9-inch screen)
- Wiring Harnesses (specific for Toyota Camry 2002-2006)
- Backup Camera (1080p, 170° wide-angle)
- GPS Antenna
- WiFi Antenna
- Bluetooth Antenna
- RCA Cable
- USB Cables (x2)
- Microphone (MIC)
- Power Cable
- User Manual

Image: Package contents and dimensions of the car radio unit.
3. Installation Guide
The Leadfan Car Radio is designed for plug-and-play installation, utilizing the provided wiring harnesses for a direct fit into your Toyota Camry (2002-2006).
3.1. General Installation Steps
- Preparation: Disconnect the vehicle's battery to prevent electrical shorts.
- Remove Old Unit: Carefully remove the existing factory radio from your dashboard. Refer to your vehicle's service manual for specific trim panel removal instructions.
- Connect Wiring: Connect the provided wiring harnesses from the new car radio to the vehicle's existing wiring. Ensure all connections are secure.
- Install Antennas: Connect the GPS, WiFi, and Bluetooth antennas. Position them in a location that allows for optimal signal reception, typically away from metal obstructions.
- Test Functionality: Before fully reassembling the dashboard, reconnect the battery and power on the unit to test basic functions (power, audio, touchscreen).
- Secure Unit: Mount the new car radio securely into the dashboard opening.
- Reassemble: Reinstall all removed trim panels and components.

Image: Visual comparison of the dashboard before and after installation.
3.2. Backup Camera Installation
The included backup camera provides a 1080p high-definition, 170° wide-angle view with night vision and waterproof capabilities.
- Mount Camera: Choose a suitable location on the rear of your vehicle, typically near the license plate, to mount the backup camera.
- Route Cable: Route the camera's video cable from the rear of the vehicle to the car radio unit in the dashboard.
- Connect Power: Connect the camera's power wire to the vehicle's reverse light circuit. This ensures the camera activates automatically when the vehicle is put into reverse gear.
- Connect Video: Connect the camera's video output cable to the designated 'Backup Camera' input on the car radio unit.

Image: Backup camera wiring diagram and features.
4. Operating Instructions
4.1. CarPlay & Android Auto & MirrorLink
The unit supports wireless CarPlay for iPhones and wireless Android Auto for Android phones. MirrorLink functionality is also available, supporting wireless connection for iOS devices and both wireless/wired connections for Android devices.
- CarPlay/Android Auto: Connect your smartphone wirelessly to access navigation, music, calls, and other compatible apps directly on the car radio screen.
- MirrorLink: Use MirrorLink to display your phone's screen content directly on the car radio. For Android, you can connect wirelessly or via USB.

Image: CarPlay, Android Auto, and MirrorLink features.
4.2. Bluetooth 5.1
Equipped with Bluetooth 5.1, the car radio allows for hands-free calling and wireless audio streaming.
- Pairing: Enable Bluetooth on your smartphone and search for the car radio. Select the device and confirm pairing.
- Hands-Free Calling: Make and receive calls directly through the car radio, with audio routed through your car's speakers and using the built-in microphone.
- Music Streaming: Play audio from your smartphone wirelessly through the car radio.

Image: Bluetooth 5.1 features for hands-free calls and music.
4.3. GPS Navigation & WiFi
The unit includes a GPS navigation system that supports both offline and online maps. Connect to WiFi to download maps, stream content, and access online services.
- Navigation: Use pre-installed navigation apps or download your preferred mapping applications via WiFi.
- WiFi Connection: Connect to a mobile hotspot or available WiFi network to enable internet access for apps and online features.

Image: GPS Navigation and WiFi connectivity.
4.4. FM Radio
Access local and regional radio stations with the built-in FM tuner. You can save your favorite stations for quick access.
- Scanning: Use the scan function to automatically find available stations.
- Saving Presets: Tune to a desired station and use the save option to store it as a preset.
5. Advanced Features
5.1. Steering Wheel Control (SWC)
The car radio supports your vehicle's original steering wheel controls, allowing for safer operation while driving.
- Learning Function: Access the SWC settings in the unit's menu. Follow the on-screen prompts to assign functions to your steering wheel buttons. This typically involves pressing a button on the steering wheel and then selecting the corresponding function on the screen.

Image: Steering Wheel Control setup interface.
5.2. HD Touchscreen & Split Screen
The 9-inch capacitive touchscreen offers a high-definition visual experience with a resolution of 1280x720. The split-screen function allows you to run two applications simultaneously.
- Split Screen: To activate, swipe from the side of the screen or use the dedicated split-screen icon (if available) to select a second application to run alongside the first.

Image: Touchscreen features and split-screen functionality.
5.3. EQ Settings
Customize your audio experience with the built-in Equalizer (EQ) settings, offering various sound effects and an 18-band adjustment.
- Adjusting EQ: Navigate to the audio settings menu to access the equalizer. You can select from preset sound modes or manually adjust individual frequency bands.

Image: 18-band Equalizer settings interface.
6. Specifications
| Brand | Leadfan |
| Model Name | Leadfan Car Radio |
| Model Number | US03-1-SW600A |
| Operating System | Android 11 |
| Memory Storage Capacity | 32 GB |
| Screen Size | 9 inches |
| Display Type | LED, Capacitive Touchscreen |
| Screen Resolution | 1280 x 720 |
| Connectivity Technology | Bluetooth 5.1, USB, Wi-Fi |
| Supported Navigation System | GPS |
| Included Components | Wiring harnesses, Backup Camera, GPS Antenna, USB Cables, Microphone |
7. Troubleshooting
If you encounter issues during installation or operation, please refer to the following common troubleshooting tips:
- No Power: Check all power connections and ensure the vehicle's battery is properly connected. Verify fuses are intact.
- No Sound: Check speaker wiring connections. Ensure the volume is not muted or set to zero. Verify EQ settings are not causing issues.
- Touchscreen Unresponsive: Try restarting the unit. Ensure the screen is clean and free of debris.
- GPS Signal Issues: Ensure the GPS antenna is properly installed and has a clear view of the sky, away from metal obstructions.
- Bluetooth Pairing Problems: Ensure Bluetooth is enabled on both the car radio and your smartphone. Try unpairing and re-pairing the devices.
- Backup Camera Not Displaying: Verify the camera's power and video connections. Ensure the camera is correctly wired to the reverse light trigger.
For more complex issues or if the problem persists, please contact technical support.
8. Warranty and Support
Leadfan is committed to providing high-quality products and customer service.
- 30-Day Free Return: You may return the product within 30 days of purchase for a full refund.
- 12-Month Replacement: The product is eligible for a free replacement within 12 months of purchase for quality-related issues.
- Lifetime Technical Support: We offer lifetime technical support to assist you with any questions or issues you may encounter.
How to Get Technical Support:
If you require technical assistance, please follow these steps:
- Locate the seller information on your purchase platform (e.g., Amazon).
- Click on the seller's name (e.g., "Nideo") and then select "Ask a question" to contact customer service.
- Provide a detailed description of your issue, including any photos or videos that may help diagnose the problem. Our support team will respond within 24 hours.

Image: Steps to contact technical support.







