I-DATEQ SPL-D3mk2 Isiboniso seMibala emininzi kunye neNqanaba leLogger yeSandi

IiNkcazo zeMveliso

• Umzekelo: I-SPL-D3mk2
• Uhlobo: Isiboniso seMibala emininzi kunye nenqanaba lesandi selogger
• Inguqulelo Yemanyuwali: SPL-D3_200101_V1.0EN

Imiyalelo yokusetyenziswa kwemveliso

Imiyalelo yoKhuseleko

1. Yonke imiyalelo yokhuseleko, izilumkiso, kunye nemiyalelo yokusebenza kufuneka ifundwe kuqala.
2.  Zonke izilumkiso kwisixhobo kufuneka zithathelwe ingqalelo.
3. Imiyalelo yokusebenza kufuneka ilandelwe.
4. Gcina imiyalelo yokusebenza ukuze uyisebenzise kwixesha elizayo.
5. Isixhobo masingaze sisetyenziswe kwindawo ekufutshane ye
   amanzi; qinisekisa ukuba amanzi kunye damp ayikwazi ukungena kwisixhobo.
6. Isixhobo sinokufakwa kuphela okanye sifakwe ngokuhambelana neengcebiso zomenzi.
7. Izixhobo kufuneka zifakelwe okanye zifakwe ngendlela yokuba ukungena komoya okulungileyo kungathintelwa nangayiphi na indlela.
8. Isixhobo asinakuze sifakwe kwindawo ekufutshane yemithombo yobushushu, njengeeyunithi zokufudumeza, iibhoyila, kunye nezinye izixhobo ezenza ubushushu (kubandakanywa ampabaphilayo).
9. Qhagamshela izixhobo kunikezelo lwamandla lwevolthi echanekileyotage, usebenzisa kuphela iintambo ukuba utshintsho ekusebenzeni kwesixhobo luqatshelwe. Abasebenzi bobugcisa abafanelekileyo kufuneka bayitshekishe.
10. Umsebenzisi akanakwenza nawuphi na umsebenzi kwisixhobo ngaphandle kwalowo uchazwe kwimiyalelo yokusebenza.

Ukuhlohla

• Uqhagamshelwano
  • Qinisekisa uqhagamshelo olululo lwazo zonke iintambo ngokweengcebiso zomenzi.
• Ungeniso lweMibhobho
  • Qhagamshela i-microphone kwi-port ekhethiweyo yokufaka kwisixhobo ngokukhuselekileyo.
• Ukusebenza
  • Amandla kwisixhobo ngokulandela imiyalelo echaziweyo kwimanuwali.

IiNgcaciso zobuGcisa

• Izimvo: Ungeniso lwemicrophone
• Iqhelekile: Ikhonkco
• Intshayelelo Uqwalaselo
  • Landela amanyathelo olungelelwaniso lwentshayelelo njengoko kuchaziwe kwincwadana ukuze usebenze ngeyona ndlela iphezulu.

Imibuzo Ebuzwa Rhoqo (FAQ)

• Ngaba abathengi bangayisebenzisa le mveliso?
  Hayi, le mveliso yenzelwe ukusetyenziswa kunye nokufakwa kuphela ngabafaki abaqeqeshiweyo nabaqinisekisiweyo. Usetyenziso lwabathengi aluxhaswanga ngumenzi.

Ngenxa yobume bale mveliso kunye nemisebenzi eyiliweyo ithathwa njengesetyenziswayo kwaye ihlohlwe kuphela ngabafaki abaqeqeshiweyo nabaqinisekisiweyo kwaye ayenzelwanga ukusetyenziswa kwabathengi okanye ukuthengiswa kwakhona. Usetyenziso lwabathengi aluxhaswanga ngumenzi.

Imiyalelo yokhuseleko

1. Yonke imiyalelo yokhuseleko, izilumkiso kunye nemiyalelo yokusebenza kufuneka ifundwe kuqala.
2. Zonke izilumkiso kwisixhobo kufuneka zithathelwe ingqalelo.
3. Imiyalelo yokusebenza kufuneka ilandelwe.
4. Gcina imiyalelo yokusebenza ukuze uyisebenzise kwixesha elizayo.
5. Isixhobo masingaze sisetyenziswe kwindawo ekufutshane namanzi; qinisekisa ukuba amanzi kunye damp ayikwazi ukungena kwisixhobo.
6. Isixhobo sinokufakwa kuphela okanye sifakwe ngokuhambelana neengcebiso zabavelisi.
7. Izixhobo kufuneka zifakelwe okanye zifakwe ngendlela yokuba ukungena komoya okulungileyo kungathintelwa nangayiphi na indlela.
8. Isixhobo asinakuze sifakwe kwindawo ekufutshane yemithombo yobushushu, njengeeyunithi zokufudumeza, iibhoyila, kunye nezinye izixhobo ezenza ubushushu (kubandakanywa ampabaphilayo).
9. Qhagamshela izixhobo kunikezelo lwamandla lwevolthi echanekileyotage, usebenzisa kuphela iintambo ezicetyiswa ngumenzi, njengoko kuchaziwe kwimiyalelo yokusebenza kunye/okanye kuboniswe kwicala loqhagamshelo lwesixhobo.
10. Isixhobo sinokuqhagamshelwa kuphela kunikezelo lwamandla ombane owenziwe ngokusemthethweni.
11. Intambo yamandla okanye intambo yombane kufuneka ibekwe ngendlela yokuba ingakwazi ukuhamba ngendlela eqhelekileyo, kwaye izinto ezinokonakalisa intambo okanye intambo ayinakubekwa kuyo okanye ngokuchasene nayo. Ingqwalasela ekhethekileyo kufuneka ihlawulwe kwindawo apho ikhebula ifakwe kwisixhobo kunye nalapho intambo idibaniswe nombane.
12. Qinisekisa ukuba izinto zangaphandle kunye nolwelo alukwazi ukungena kwisixhobo.
13. Isixhobo kufuneka sicocwe kusetyenziswa indlela ecetyisiweyo ngumenzi.
14. Ukuba isixhobo asisetyenziswanga ixesha elide, intambo yombane okanye intambo yombane kufuneka iqhawulwe kunikezelo lwamandla.
15. Kuzo zonke iimeko apho kukho umngcipheko, emva kwesiganeko, ukuba isixhobo sinokungakhuselekanga, njengale:
    • ukuba intambo yamandla okanye intambo yombane yonakele
    • ukuba izinto zangaphandle okanye ulwelo (kubandakanywa namanzi) zingenile kwisixhobo
    • ukuba isixhobo siye sawa okanye i-casing yonakalisiwe ukuba utshintsho ekusebenzeni kwesixhobo luyabonwa
      Abasebenzi bobugcisa abafanelekileyo kufuneka bayitshekishe.
16. Umsebenzisi akanakwenza nawuphi na umsebenzi kwisixhobo ngaphandle kwalowo uchazwe kwimiyalelo yokusebenza.

Intshayelelo

• I-SPL-D3mk2 yinqanaba eliphezulu lokubonisa inqanaba lomsindo eligcina umgangatho wesandi sampubuncinane iintsuku ezingama-60. Inqanaba lesandi sampinokuba njalo viewed usebenzisa isoftware yoqwalaselo okanye igcinwe ngaphandle kwi-USB FAT32 drive. Enye idata ebalulekileyo nayo igcinwe njengokunika amandla phezulu, izohlwayo okanye kunokwenzeka tampering.
• Ukusebenzisa isoftware yoqwalaselo i-SPL-D3mk2 inokufundwa kwaye ihlengahlengiswe.
• Ekukhululweni kweWindows 7 amaqonga kwaye kamva ayaxhaswa. Bonke abasebenzisi banakho kuphela view izicwangciso kunye nokugawulwa. Ukunyenyisa useto lolungelelwaniso igama eliyimfihlo elongezelelweyo kunye nelayisenisi file Iyafuneka. I-SPL-
• I-D3mk2 inokudityaniswa ngenethiwekhi okanye nge-USB kwikhompyuter yeWindows.
• I-SPL-D3mk2 isebenzisa imakrofoni yokulinganisa ukumisela inqanaba lesandi langempela. Xa umlinganiselo ubonisa ukuba amanqanaba esandi sele eza kudlula, idispleyi iya kutshintsha ukusuka eluhlaza ukuya kuorenji nabomvu xa amanqanaba egqithisiwe.
• Imisebenzi yekhalenda ekhethekileyo ivumela amanqanaba ahlukeneyo esandi ngexesha lemini nangonyaka.
• Nge-SRL-1 i-breaker yesiphaluka esikhethekileyo isikhanyiso sesilumkiso sangaphandle sinokudityaniswa kunye nonikezelo lwamandla oluphambili lwe-exampyi DJ booth monitor. Ngale ndlela inqanaba eliphezulu lesandi lihlala li-inshurensi ngaphandle kokuchukumisa umgangatho wesandi.

Ukuhlohla

• I-SPL-D3mk2 ifakwe ngaphandle komthombo womsindo (idesika yokuxuba ye-example) kunye nezithethi kunye ampisihlanguli.

• Emva kokufakela kunye nokulinganisa i-SPL-D3mk2, i-SPL-D3mk2 iya kubonisa onke amaxabiso alinganisiweyo kuluhlaza, orenji okanye obomvu ngaphakathi +/-1,5dB.

Uqhagamshelwano

igalelo lemakrofoni; XLR 3-pin female

Iphini	Umsebenzi	Inkcazo
1	Umhlaba	Umhlaba womsindo
2	Umsindo +	Unikezelo kunye neaudio
3	Umsindo-	Unikezelo kunye neaudio

Itheyibhile 1: uxhulumaniso lwe-microphone
Izibuko le-USB; USB-B female

Iphini	Umsebenzi	Inkcazo
1	VCC +	Ubonelelo
2	Idatha-	Idatha
3	Idatha +	Idatha
4	GND	Umhlaba

Itheyibhile 2: Uqhagamshelwano nge-USB
Izibuko lomnatha; RJ45 ibhinqa

Iphini	Umsebenzi	Inkcazo
1	TX-D +	Idatha
2	TX-D -	Idatha
3	RX-D +	Idatha
4		Ayisetyenziswa
5		Ayisetyenziswa
6	RX-D –	Idatha
7		Ayisetyenziswa
8		Ayisetyenziswa

Uluhlu 3: Uqhagamshelwano lwenethiwekhi
Izibuko le-USB; USB-A female

Iphini	Umsebenzi	Inkcazo
1	VCC +	Ubonelelo
2	Idatha-	Idatha
3	Idatha +	Idatha
4	GND	Umhlaba

Itheyibhile 4: Uqhagamshelwano nge-USB
ikhonkco;
Jack 3-iipeni female

Iphini	Umsebenzi	Inkcazo
SL	Umhlaba	Umhlaba wedatha
Ingcebiso	Idatha TX	Thumela idatha
Ring	Idatha yeRX	Ukufumana idatha

Ungeniso lwemicrophone

Qhagamshela i-microphone yomlinganiselo enikiweyo apha. I-wiring ye-microphone inokwandiswa ngentambo ye-microphone eqhelekileyo. Nika ingqalelo kwi-polarity ye-wiring. Ukuba imakrofoni iqhagamshelwe ngokungalunganga ayizukusebenza. Umlinganiselo uya kunika umyalezo wemposiso, kwaye ivolyum iya kuncitshiswa kakhulu.
I-microphone kufuneka ifakwe ukuze 'ive' zombini isandi esivela kwizithethi kunye nesandi esivela kwisihlwele esisegumbini.
Ikhonkco
Olu ludibaniso lwedatha kunye ne-SPL-5MK2 ekhethwayo, SPL6 okanye i-SRL1 stage relay. Kule ntambo ye-6.3mm yejack yestereo iyafuneka.

Ukusebenza

1. Umboniso 1:
   Ibonisa elona xabiso lilinganiselweyo le-dB eluhlaza, orenji okanye obomvu.
2. Ubunzima besihluzi:
   Ibonisa ubunzima besihluzi esisetyenzisiweyo kwi-dBA, dBC okanye dB (akukho kucoca).
3. Ibha yeVU:
   Ibonisa elona nqanaba likhawulezayo lePPM kwi-dB.
   Idityaniswe kwi-SPL-5MK2 okanye i-SPL6 iVU imitha nayo ingasetyenziselwa ukubonisa iLeq ekhethiweyo.
4. Umboniso wesi-2 no-3:
   Ibonisa elona xabiso lilinganiselweyo le-dB eluhlaza, orenji okanye obomvu.
   Yomibini imiboniso inokukhethwa ngexabiso elizimeleyo/ lokucoca.
5. Leq/min:
   Ibonisa ixesha elisetyenzisiweyo le-Leq. Kule example 10 imizuzu yokubonisa 2 kunye nemizuzu engama-60 yokubonisa 3.
6. I-USB-A uxhumano:
   Ivumela i-FAT32 drive yangaphandle ukuthumela idatha yomlinganiso ngaphandle kweentsuku ezingama-30 ezidlulileyo.
7. Cofa iqhosha:
   Ivumela ukuthumela idatha yokulinganisa kwi-FAT32 drive yangaphandle.
8. Itywina:
   Ivumela ukutywina i-cable cover usebenzisa izikrufu ezimbini ze-M4 kunye nesitywina sentambo.
9. Umboko:
   3 pin XLR uqhagamshelwano lwe-DCM-5 imakrofoni.
10. Ikhonkco:
    Uqhagamshelo lwekhonkco lwedatha kunye ne-SRL-1 stage relay, SPL-5MK2 okanye SPL6.
11. I-USB:
    Uqhagamshelo lwe-USB-B yoqwalaselo ngekhompyutha yeefestile.
12. I-Ethernet:
    Uqhagamshelo lwe-Ethernet kunye ne-PoE+ yamandla. Ukusetyenziswa 12 Watt.
13. Amandla:
    Uqhagamshelo lwamandla, 24 volt, ucetyiswe 1 amp (24 Watt) Ukusebenza okuqhelekileyo 0.5 amp (12 Watt).
14.  I-USB:
    I-USB-Uqhagamshelwano lokulahla idatha kwi-FAT32 drive yangaphandle.
15. Iqhosha lokulawula:
    Iqhosha lokulawula lokulahla idatha yomlinganiselo weentsuku ezingama-30 kwi-FAT32 drive yangaphandle.
16. Itywina:
    I-2x M4 DIN 404 izikrufu zokutywina zokutywina isigqubuthelo sentambo.
17. IVESA 50:
    I-VESA eqhelekileyo ye-50 yokunyuka kodonga, i-M4, ubude obude be-12mm.
18. Umgangatho:
    Isibiyeli sokunyuka esisemgangathweni esibonelelwe nge-SPL-D3mk2, i-M4, ubude obukhulu be-12mm isibiyeli sokuxhoma esiMiselweyo se-M10 G-hook mounting. M4, ubude ubude 12mm
19. Indawo yokhuseleko:
    I-M5 DIN screw yokufakela intambo yokhuseleko eyongezelelweyo. Ubude bobude besijirufu: 12mm

Iinkcukacha zobugcisa

• Igalelo
  • I-Mic (i-microphone yokulinganisa)XLR-3 female. Sebenzisa kuphela umboko we-DCM-5 woqobo.
• Eqhelekileyo
  • Umsindo
  • Impendulo yefrikhwensi30Hz…16kHz @ -1,5dB
• Uqhagamshelo lwenethiwekhi
  • Inkumbulo yangaphakathi iintsuku ezingama-60 * ulwazi loxinzelelo lwesandi (isisombululo sesekondi esi-1)
• Inkumbulo yangaphandle
  • Isiqhelo
  • Ukuya kuthi ga kwi-32Gb FAT32 USB drive60 iintsuku * ulwazi loxinzelelo lwesandi (isisombululo se-1 sesibini sokuthumela ngaphandle kwifomathi ye-CSV.EU: Ikhonkco lokulinganisa elenzelwe ukuthobela imigangatho ye-IEC-61672-1 iklasi
  • 2France: Ikhonkco lokulinganisa lenzelwe ukuthobela imimiselo
  • I-NFS 31-122-1-2017 kunye ne-decrét 2017-1244BE: Ikhonkco lokulinganisa elenzelwe ukuthobela imigaqoVLAREM-II Cat.1, Cat.2 kunye neCat.3DE: Ikhonkco lokulinganisa elenzelwe ukuhambelana neenkcukacha
  • I-DIN-61672, i-DIN-60651 kunye ne-DIN15905-5
• Ukunikezwa Amandla
  • Ukubonelela ngevoltage24 yevolt
  • Ukusetyenziswa kwamandla (max)24 Watt
  • Ukusetyenziswa kwamandla (ukusebenza okuqhelekileyo)12 Watt
• Imilinganiselo kunye nobunzima
  • Ngaphambili 282mm x 192mmUbunzulu 55mmUbunzima 2.8kg
  • Idatha yenqanaba lesandi kunye nokuloga kwesiganeko kugcinwa kangangeentsuku ezingama-365 okanye ngaphantsi xa imemori igcwele. Inkqubo yememori iya kucima kwaye ikhuphe idatha endala kuqala.

Uqwalaselo

Ubumbeko lwentshayelelo

• I-SPL-D3mk2 yinqanaba eliphezulu lokubonisa inqanaba lomsindo eligcina umgangatho wesandi sampkancinci kangangeenyanga ezilishumi elinambini. Inqanaba lesandi sampinokuba njalo viewed usebenzisa isoftware yoqwalaselo okanye igcinwe ngaphandle kwi-USB FAT32 drive. Enye idata ebalulekileyo nayo igcinwe njengokunika amandla phezulu, izohlwayo okanye kunokwenzeka tampering.
• Ukusebenzisa isoftware yoqwalaselo i-SPL-D3mk2 inokufundwa kwaye ihlengahlengiswe.
• Ekukhululweni kweWindows 7 amaqonga kwaye kamva ayaxhaswa. Bonke abasebenzisi banakho kuphela view izicwangciso kunye nokugawulwa. Ukunyenyisa useto lolungelelwaniso igama eliyimfihlo elongezelelweyo kunye nelayisenisi file Iyafuneka. Ukuqhagamshela kwi-SPL-D3mk2 ikhompyutha yefestile enenkxaso ye-USB iyafuneka.
• I-SPL-D3mk2 isebenzisa imakrofoni yokulinganisa ukumisela inqanaba lesandi langempela. Xa umlinganiselo ubonisa ukuba amanqanaba esandi sele eza kudlula, idispleyi iya kutshintsha ukusuka eluhlaza ukuya kuorenji nabomvu xa amanqanaba egqithisiwe.
• Imisebenzi yekhalenda ekhethekileyo ivumela amanqanaba ahlukeneyo esandi ngexesha lemini nangonyaka.
• Nge-SRL-1 i-breaker yesiphaluka esikhethekileyo isikhanyiso sesilumkiso sangaphandle sinokudityaniswa kunye nonikezelo lwamandla oluphambili lwe-exampyi DJ booth monitor. Ngale ndlela inqanaba eliphezulu lesandi lihlala li-inshurensi ngaphandle kokuchukumisa umgangatho wesandi.

Ukuhlohla

• I-software yoqwalaselo ye-SPL-D3mk2 isikhalazo ngezisistim zokusebenza zilandelayo:
  • Windows XP
  • Windows 7
  • Windows 8
  • Windows 10
  • Windows 11
• Apple OSX, Linux kunye nezinye iinkqubo zokusebenza azixhaswa. Ubuncinci besisombululo somboniso 1400 * 1050 pixels.
• Web uqwalaselo olusekwe, i-SPL-D3mk2 inonxibelelwano lwenethiwekhi kunye ne-DHCP ebhodini. Iyunithi inokunikwa amandla yi-adapter ye-PoE okanye i-24V (ibandakanyiwe).
• Soloko usebenzisa isoftwe yamva nje kunye nokukhululwa kwe-firmware enokufumaneka www.dateq.nl.
• Uqwalaselo
• Kwesi sahluko uqwalaselo kunye nezicwangciso zenkqubo ye-SPL-D3mk2 zichazwe. Olu seto luqhele ukwenziwa kanye xa kuhlohla. Zonke iisetingi ezenziweyo zinokugcinwa kwi-backup file ukusetyenziswa kamva okanye ukubuyisela useto lwentsusa emva kokutshintsha.
• Ukuqhagamshela ikhompyutha
• Ikhompyutha iqhagamshelwe kwisiboniso kusetyenziswa intambo eqhelekileyo ye-USB-A ukuya kwi-USB-B. Emva kokudibanisa i-SPL-D3mk2 kwikhompyuter yakho abaqhubi befestile abasemgangathweni baya kulayishwa. Akukho baqhubi bongezelelweyo bafunekayo, babandakanyiwe kwiifestile zakho zokusebenza.
• Kuqhagamshelo lokuqala lofakelo lweefestile ezisemgangathweni abaqhubi banokuthatha imizuzu emininzi ngokuxhomekeke kwinkqubo yakho yokusebenza.

Ilayisensi yoqwalaselo

• Isoftware yoqwalaselo iqhele ukusetyenziselwa kuphela view useto kunye nokufunda isandi sampkunye nokugawula. Kuba viewukungenisa okanye ukuthumela ngaphandle akukho layisenisi okanye igama lokugqitha elifunekayo. Ukutshintsha isethingi, kubandakanywa ukufakela kokuqala ilayisenisi yokufakela kunye negama lokugqitha kuyafuneka.
• Ilayisensi yokufakela inikwa kuphela abafakeli beaudio abaqinisekisiweyo abaqinisekisiweyo. Xa ungumnikazi we-SPL limiter kunye nezicwangciso kufuneka zitshintshwe, kufuneka uqhagamshelane nomfakeli wakho wendawo.
• Ilayisenisi yokufakela idityanisiwe kwaye ibhaliswe kwinkampani ehlohlayo kwaye ayinakugqithiselwa kwiqela lesithathu. Ilayisensi yokufaka iqulethe yonke inkampani kunye neenkcukacha zoqhagamshelwano, eziya kugcinwa kumda we-SPL ngexesha lokucwangciswa.
• Ukuvula isithinteli
• Phambi kokuba kwenziwe utshintsho igama lokugqitha lelayisenisi kufuneka lifakwe. Eli gama lokugqithisa lidityanisiwe kwaye ligcinwe ngaphakathi kwelayisensi file
  SPLD3.DSR.
• Ilayisensi file I-SPLD3.DSR kufuneka ikhutshelwe kwifolda equlethe isoftware.
• Ukuba akukho phepha-mvume lisebenzayo elichongiweyo isoftware iyakubonisa oku. Nceda qaphela; ilayisenisi esebenzayo file kufuneka ifakwe phambi kokuqala isoftware.
• Phila
  Eziphilayo view yesoftware ivumela ukubeka esweni imilinganiselo yangoku ye-SPL-D3mk2. Le miboniso ilandela umbala wowona mboniso uluhlaza orenji nabomvu.
• Bonisa ubumbeko
  Ubumbeko lwencwadana yemilinganiselo yesandi.
• Imiboniso
  Zontathu iziboniso zinokusetwa kwiimpendulo ezahlukeneyo, amaxesha kunye nemibala.

Izihluzi rhoqo:

• Isihluzi sobunzima be-A
• C isihluzo sobunzima
• Isihluzi esingenasisindo seFlethi (Z)

Amaxesha okuphendula:

• Ukukhawuleza (125mS)
• Icotha(1000mS)
• Leq(1000mS ~ 60 imizuzu)

Imibala:

• Green30 – 110dB
• IOrenji70 – 130dB
• I-Red70 – 130dB
• Qaphela ezona sethingi zincinci neziphezulu zokutshintsha kombala zilandela kuluhlaza/orenji kunye noorenji/obomvu umda.
• imitha yeVU
• Umitha we-VU ubonisa elona xabiso le-dB langempela, elingenasisindo (Z) ngexesha lokuphendula ngokukhawuleza (125mS). Iindawo eziluhlaza eziorenji kunye nezibomvu zingasetwa ku:
• Green30 – 110dB
• IOrenji70 – 130dB
• I-Red70 – 130dB
• Imakrofoni
• Ukulungiswa kweMicrophone kungasetyenziselwa ukulungelelanisa ukubeka imakrofoni kunye neyona ndawo yokulinganisa esemthethweni.
• Ukulungiswa kwemakrofoni -12dB kude +12dB
• Ukukhanyisa
• Ukukhanya kwesiboniso kunokulungiswa phakathi kwe-10% kunye ne-100% okanye kusetelwe ukulungiswa kokukhanya okuzenzekelayo. Ukukhanya kusetelwe kwi-50%.
• Ixesha lokubeka ixesha
• Izithuba zexesha zivumela amaxabiso ahlukeneyo e-dB phakathi evekini. Ii-slot ezintathu ngosuku ziyafumaneka, kumboniso ngamnye. Indawo yokubeka inciphisa ixabiso eliphezulu elivumelekileyo ngenani elikhethiweyo le-dB.
  Utshintsho lugcinwa ngokuzenzekelayo.
• Ixesha kunye nomhla zisetwa ngesandla ngokulungelelanisa ixesha lokubonisa kwixesha elidityanisiweyo lekhompyutha.

Umephuli wojikelezo

• I-SRL1 i-circuit breaker inokudibaniswa ne-SPL-D3mk2 ukuba isebenze njengesilumkiso okanye ukusika amandla ekugqithiseni ubuninzi bezinga le-dB. Umthombo wexabiso le-dB unokukhethwa kwenye yeziboniso ezintathu.
• Inqanaba lesohlwayo libonisa umgangatho ophezulu, ohambelana ne-orenji / i-red threshold setting. Oku kunokuba yi-dB ngokukhawuleza, ukucotha okanye iLeq, kuxhomekeke kulungiselelo lwesiboniso.
• Isibali-xesha sokulibaziseka kwesohlwayo siqalisa ukusebenza ekudubuleni elona xabiso likhulu leseti ye-dB. Ngexesha lokulibaziseka kwesohlwayo i-SRL-1 iqala ukuqhwanyaza isibane sesilumkiso. Xa isibali-xesha siphela ixesha lesohlwayo liqala kwaye i-SRL-1 itshintsha eyona nto iphambili yokudluliselwa kwamandla. Emva kwesohlwayo isilayidi esiphambili samandla siya kulayitwa kwakhona ukubuyisela amandla.
•  Ulungelelwaniso
  • Ulungelelwaniso luvumela ukuvavanya zonke ii-LED zokubonisa kunye nokulinganisa imakrofoni esetyenzisiweyo.
• Uvavanyo lwe-LED:
  • Ivavanya zonke ii-LED eziluhlaza, eziOrenji kunye neziBomvu.
• Umboko:
  • Sebenzisa i-calibrator evunyiweyo esemgangathweni kwi-94dBA kwaye ucofe kwi-Microphone. Imakrofoni ngoku iya kulinganiswa kumthombo wesalathiso osetyenzisiweyo kwaye iphinde ibalwe ngaphakathi kwi-mV/pA.
• Inkqubo
  • Iphepha lenkqubo livumela ukuhlaziya i-firmware, i-backup kunye nokubuyisela izicwangciso kwaye ufunde inombolo ye-serial yeyunithi kunye nemakrofoni.
  • Ukukhetha ulwimi kunye nezicwangciso ze-IP.
• Uhlaziyo lweFirmware:
  • Khetha i-firmware yamva nje kwaye ucofe kuhlaziyo.
  • Xa i-firmware esebenzayo ifunyenwe umboniso uya kubonisa i-E3 (imodi ye-bootloader) kwisiboniso esikhulu kunye nokuhlaziya i-firmware.
• Phawula;
  • Ezinye iifestile ezakhayo aziyixhasi ngokupheleleyo indlela yokuqalisa inkqubo. Xa ibha yenkqubela phambili ingaqali kwaye umboniso ukwi-E3; qhawula intambo ye-USB kwaye uyiqhagamshele kwakhona. Uhlaziyo luqala ukusebenza emva kokudibanisa kwakhona.
• Iisetingi:
  • Gcina useto luvumela ugcino lwesetingi zangoku zesixhobo.
  • Useto lokulayisha luvumela ukubuyisela useto olugciniweyo lwangaphambili.
  • Ukubuyisela kwisimo sasefektri kuvumela ukubuyisela zonke iisetingi kwi-default default. Zonke iisetingi zangaphambili ziya kulahleka.
  • 
• Isixhobo:
  Ibonisa inombolo yothotho yesixhobo, kunye nedilesi yehardware yendawo (idilesi ye-MAC) yoqhagamshelwano lwe-ethernet. Ezi ziihardware ezicwangcisiweyo kwaye azinakutshintshwa.
• Ulwimi:
  Ibonisa ulwimi lwangoku lwesoftware. Khetha ukutshintsha ulwimi lwesoftwe.
• Imbali
  I-SPL-D3mk2 ifaka onke amaxabiso alinganisiweyo kwaye igcina ezi zifihliweyo kwimemori yayo yangaphakathi. Iinzame zokuguqula isandi esilinganisiweyo sample data ngaphakathi kwe-SPL-D3mk2 ithintelwe kwaye iya kubangela iyunithi enesiphene enokubuyiselwa kuphela kwidesika yenkonzo yeDateq.
• Khetha umhla:
  Khetha umhla ekufuneka uhlolwe.
• Bonisa iGrafu:
  Khetha ibhokisi yokukhangela yexabiso lomlinganiselo ekufuneka iboniswe.
• Andisa:
  Sebenzisa ivili lokuskrola lemouse yakho ukusondeza ngaphakathi nangaphandle kweendawo ezikhethiweyo zomlinganiselo.
• Shicilela:
  Shicilela umzobo wangoku view (kuquka ukusondeza) kumshicileli wakho.
• Thumela ngaphandle:
  Thumela yonke idatha yomlinganiselo ukusuka kusuku olukhethiweyo ukuya kwixabiso elahlulwe ngekoma (CSV).

Inkxaso yemveliso
Ngemibuzo malunga nezithinteli zothotho lwe-SPL, izincedisi okanye ezinye iimveliso qhagamshelana noDateq apha:

• IDateq Audio Technologies BV De Paal 37
  1351 JG Almere
  Inetherlands
• Ifowuni:
  • (036) 54 72 222
• I-imeyile:
  • ulwazi@dateq.nl
• I-Intanethi:
  • www.dateq.nl

Amaxwebhu / Izibonelelo

I-DATEQ SPL-D3mk2 Isiboniso seMibala emininzi kunye neNqanaba leLogger yeSandi [pdf] Incwadi Yomyalelo I-SPL-D3mk2 Umboniso oMninzi weMibala kunye neNqanaba lokuLonwa kweSandi, i-SPL-D3mk2, uMboniso weMibala emininzi kunye neNqanaba leNqanaba lokuLondoloza, ukuBonisa kunye neNqanaba lokuLondoloza, iNqanaba leNqanaba leSandi, iLogger yeNqanaba

Iimbekiselo

• Incwadi yokusebenzisa