Danfoss AS-CX06 Programmable Controller
Iinkcukacha
- Umzekelo: Isilawuli esicwangcisiweyo Uhlobo lwe-AS-CX06
- Imilinganiselo: 105mm x 44.5mm x 128mm (Ngaphandle komboniso weLCD)
- Max. IiNodes RS485: Ukuya kuthi ga kwi-100
- Max. I-Baudrate RS485: 125 kbit/s
- Max. IiNodi CAN FD: Ukuya kuthi ga kwi-100
- Max. I-Baudrate CAN FD: 1 Mbit/s
- Ubude bocingo RS485: Ukuya kuthi ga kwi-1000m
- Ubude bocingo CAN FD: Ukuya kuthi ga kwi-1000m
Imiyalelo yokusetyenziswa kwemveliso
UQhagamshelwano lweNkqubo
Umlawuli we-AS-CX06 unokudityaniswa kwiinkqubo ezahlukeneyo kunye nezixhobo, kubandakanya:
- RS485 ukuya BMS (BACnet, Modbus)
- I-USB-C yoqhagamshelwano lwe-Stepper Driver eyakhelwe-ngaphakathi
- Uqhagamshelo lwePC ngePen drive
- Uqhagamshelo Cloud ngokuthe ngqo
- Ibhasi yangaphakathi ukuya kulwandiso lwe-I/O
- izibuko Ethernet for protocols ezahlukeneyo kuquka Web, BACnet, Modbus, MQTT, SNMP, njl.
- Uqhagamshelo kubalawuli abongezelelweyo be-AS-CX okanye i-Alsmart ekude ye-HMI
I-RS485 kunye noNxibelelwano lwe-CAN FD
I-RS485 kunye ne-CAN FD izibuko zisetyenziselwa unxibelelwano kunye neenkqubo ze-fieldbus, i-BMS, kunye nezinye izixhobo. Iinkcukacha ezingundoqo ziquka:
- I-RS485 i-topology yebhasi kufuneka ibe nokupheliswa komgca kunye ne-resistors yangaphandle ye-120 Ohm kuzo zombini iziphelo kwindawo ephazamisayo.
- Max. inani leendawo ze-RS485: Ukuya kuthi ga kwi-100
- Unxibelelwano lwe-CAN FD lusetyenziselwa unxibelelwano lwesixhobo kunye nesixhobo esineemfuno ezifanayo ze-topology njenge-RS485.
- Max. inani leendawo ze-CAN FD: Ukuya kutsho kwi-100
Iibhodi zeeNgeniso neZiphumo
I-AS-CX06 ifaka iibhodi eziphezulu kunye nezantsi kwiimpembelelo ezahlukeneyo kunye neziphumo ezibandakanya iimpawu ze-analog kunye nedijithali, uxhulumaniso lwe-Ethernet, igalelo lemodyuli yokubuyisela ibhetri, kunye nokunye.
Ukuchongwa
| AS-CX06 Lite | 080G6008 |
| AS-CX06 Mid | 080G6006 |
| AS-CX06 Mid+ | 080G6004 |
| AS-CX06 Pro | 080G6002 |
| AS-CX06 Pro+ | 080G6000 |
Imilinganiselo
Ngaphandle komboniso we-LCD
Ngomboniso we-Snap-on LCD: 080G6016
Uqhagamshelwano
Uqhagamshelwano lwenkqubo
Ibhodi ephezulu
Ibhodi engezantsi
igalelo kwiimodyuli zogcino lwebhetri ukuvalwa ngokukhuselekileyo kweevalvu ze-electronic stepper (umz. EKE 2U)
- Ifumaneka kuphela kwi: Mid+, Pro+
- Ifumaneka kuphela kwi: Mid, Mid+, Pro, Pro+
- SSR
isetyenziswa kwindawo ye-SPST yogqithiso ku-Mid+
Unxibelelwano lwedatha
I-Ethernet (kuphela yeenguqulelo zePro kunye nePro+)
Yalatha kwindawo yeenkwenkwezi yetopology kunye ne-network hubs / switch. Isixhobo ngasinye se-AS-CX sibandakanya ukutshintsha kunye nobuchwepheshe obungaphumeleliyo.
- Uhlobo lwe-Ethernet: 10/100TX auto MDI-X
- Uhlobo lwentambo: CAT5 intambo, 100 m max.
- Uhlobo lwentambo yokudibanisaRJ45
Ulwazi lofikelelo lokuqala
Isixhobo sifumana idilesi ye-IP ngokuzenzekelayo kwinethiwekhi nge-DHCP.
Ukujonga idilesi ye-IP yangoku, cofa ENTER 
ukufikelela kwisethingi yemenyu kwaye ukhethe Useto lwe-Ethernet.
Ngenisa idilesi ye-IP kwindawo oyithandayo web umkhangeli zincwadi ukufikelela kwi web ukuphela komphambili. Uza kubhekiswa kwikhusi lokungena ngeziqinisekiso zilandelayo:
- uMsebenzisi oMiselweyo: Admin
- Igama Lokugqithisa elimiselweyo: Umlawuli
- Igama Lokugqithisa Elihlala likhona: 12345 (iya kusetyenziswa kwiscreen seLCD) Uya kucelwa ukuba utshintshe igama eligqithisiweyo emva kokungena kwakho ngempumelelo.
Phawula: akukho ndlela yokufumana igama eligqithisiweyo elilityelweyo.
RS485: Modbus, BACnet
Izibuko ze-RS485 zodwa kwaye zinokuqwalaselwa njengomthengi okanye umncedisi. Zisetyenziselwa unxibelelwano lwe-fieldbus kunye ne-BMS.
Itopology yebhasi
Iingcebiso zodidi lwentambo:
- Iperi ejijekileyo nomhlaba: iindlela ezimfutshane (okt <10 m), akukho migca yamandla ekufutshane (min. 10 cm).
- Izibini ezijijekileyo + umhlaba kunye nekhaka: imikhondo emide (okt > 10 m), i-EMC- imeko ephazamisekileyo.
Ubuninzi.. inani leendawo: ukuya kuthi ga kwi-100
| Ubude bocingo (m) | Max. izinga lobubi | Min. ubungakanani bocingo |
| 1000 | 125 kbit/s | 0.33 mm2 – 22 AWG |
INGABA FD
Unxibelelwano lwe-CAN FD lusetyenziselwa unxibelelwano lwesixhobo ukuya kwisixhobo. Ikwasetyenziswa ukudibanisa i-Alsmart ekude ye-HMI ngezibuko lokubonisa.
Itopology yebhasi
Uhlobo lwekhefu:
- Iperi ejijekileyo nomhlaba: iindlela ezimfutshane (okt <10 m), akukho migca yamandla ekufutshane (min. 10 cm).
- Izibini ezijijekileyo + umhlaba kunye nekhaka: imikhondo emide (okt > 10 m), i-EMC ephazamisekileyo bume
Ubuninzi.. inani leendawo: ukuya kuthi ga kwi-100
| Ubude bocingo (m) 1000 | Max. baudrate CAN | Min. ubungakanani bocingo |
| 1000 | 50 kbit/s | 0.83 mm2 – 18 AWG |
| 500 | 125 kbit/s | 0.33 mm2 – 22 AWG |
| 250 | 250 kbit/s | 0.21 mm2 – 24 AWG |
| 80 | 500 kbit/s | 0.13 mm2 – 26 AWG |
| 30 | 1 Mbit/s | 0.13 mm2 – 26 AWG |
Ukufakwa kwe-RS485 kunye ne-CAN FD
- Zombini iibhasi ze-fieldbuses zodidi oluhlukeneyo lweengcingo, kwaye lubalulekile kunxibelelwano oluthembekileyo ukudibanisa zonke iiyunithi kuthungelwano kunye nocingo oluphantsi.
Sebenzisa iperi enye ejijekileyo yeengcingo zokudibanisa iimpawu zokwahlula kwaye usebenzise olunye ucingo (umxample isibini esijijekileyo) sokudibanisa umhlaba. Umzekeloample:
- Ukupheliswa komgca kufuneka kubekho kuzo zombini iziphelo zebhasi ukuqinisekisa unxibelelwano olululo.
Ukupheliswa komgca kunokufakwa ngeendlela ezimbini ezahlukeneyo:- Yenza isekethe emfutshane kwiitheminali ze-CAN-FD H kunye ne-R (kuphela kwi-CANbus);
- Qhagamshela i-120 Ω isixhasi phakathi kwe-CAN-FD H kunye neetheminali ze-L ze-CANbus okanye i-A+ kunye ne-B-ye-RS485.
- Ukufakwa kwekhebula lonxibelelwano lwedatha kufuneka lwenziwe ngokuchanekileyo kunye nomgama owaneleyo ukuya kwi-voltage ephezulutagiintambo.
- Izixhobo kufuneka zixhunywe ngokwe-"BUS" topology. Oko kuthetha ukuba intambo yonxibelelwano itsalwa kwisixhobo esinye ukuya kwesinye ngaphandle kwe-stubs.
Ukuba ii-stubs zikhona kuthungelwano, kufuneka zigcinwe zimfutshane kangangoko (<0.3 m kwi-1 Mbit; <3 m nge-50 kbit). Qaphela ukuba i-HMI ekude iqhagamshelwe kwizibuko lokubonisa yenza i-stub.
- Kufuneka kubekho uxhulumaniso lomhlaba ococekileyo (olungaphazamisiyo) phakathi kwazo zonke izixhobo eziqhagamshelwe kwinethiwekhi. Iiyunithi kufuneka zibe nomhlaba odadayo (ongaqhagamshelwanga emhlabeni), odityaniswe kunye phakathi kwazo zonke iiyunithi ngocingo oluphantsi.
- Kwimeko yeentambo ezintathu ze-conductor ezintathu kunye nekhaka, ikhaka kufuneka lisekelwe kwindawo enye kuphela.
Ulwazi lomthumeli woxinzelelo
Example: DST P110 kunye nemveliso yomlinganiselo-metric
Ulwazi lwe-ETS Stepper Valve
Uqhagamshelo lwentambo yevalve
Ubuninzi bentambo yobude: 30 m
CCM / CCMT / CTR / ETS Colibri® / KVS Colibri® / ETS / KVS
| Intambo yeDanfoss M12 | Mhlophe | Mnyama | Bomvu | Luhlaza |
| Izikhonkwane ze-CCM/ETS/KVS | 3 | 4 | 1 | 2 |
| CCMT/CTR/ETS Colibri/KVS Izikhonkwane zeColibri | A1 | A2 | B1 | B2 |
| Iitheminali ze-AS-CX | A1 | A2 | B1 | B2 |
ETS 6
| Umbala wocingo | Orenji | Lubhelu | Bomvu | Mnyama | Ngwevu |
| Iitheminali ze-AS-CX | A1 | A2 | B1 | B2 | Ayidityaniswanga |
Ulwazi lwe-AKV (kuphela kuguqulelo lweMid+)
Idatha yobugcisa
Iinkcukacha zombane
| Idatha yombane | Ixabiso |
| Ukubonelela ngevoltage AC/DC [V] | 24V AC/DC, 50/60 Hz (1) (2) |
| Ubonelelo lwamandla [W] | 22 W @ 24 V AC, min. 60 VA ukuba i-transformer isetyenzisiwe okanye i-30 W DC unikezelo lwamandla (3) |
| Ubungakanani bentambo yombane [mm2] | 0.2 – 2.5 mm2 kwi-5 mm pitch connectors 0.14 – 1.5 mm2 ye-3.5 mm pitch connectors |
- 477 5×20 Series ukusuka LittelFuse (0477 3.15 MXP).
- Umthamo ophezulu weDCtage inokusetyenziswa ukuba ulawulo lufakwe kwisicelo apho umenzi echaza umgangatho wereferensi kunye nomthamotaginqanaba leesekethe ze-SELV/PELV ezifikelelekayo eziza kuthathwa njengezingeyongozi ngokwemigangatho yesicelo. Loo mqulutagInqanaba le-e lingasetyenziswa njengegalelo lobonelelo lwamandla nangona i-60 V DC kufuneka ingagqithiswa.
- US: Udidi 2 < 100 VA (3)
- Kwimeko yesekethe emfutshane unikezelo lombane lwe-DC kufuneka lukwazi ukubonelela nge-6 A kwii-5 s okanye i-avareji yamandla aphumayo <15 W.
Igalelo/Imveliso yenkcazo
- Ubuninzi bentambo yobude: 30m
- Ungeniso lwe-analog: I-AI1, AI2, AI3, AI4, AI5, AI6, AI7, AI8, AI9, AI10
| Uhlobo | Uphawu | Idatha |
| 0/4-20 mA | Ukuchaneka | ± 0.5% FS |
| Isigqibo | 1 ezine | |
| 0/5 V Radiometric | Ngokumalunga ne-5 V DC ubonelelo lwangaphakathi (10 – 90%) | |
| Ukuchaneka | ±0.4% FS | |
| Isigqibo | I-1 mV | |
| 0 - 1 V 0 - 5 V 0 - 10 V |
Ukuchaneka | ±0.5% FS (FS yenzelwe ngokukodwa uhlobo ngalunye) |
| Isigqibo | I-1 mV | |
| Ukuchasa igalelo | >100 kOhm | |
| PT1000 | Meas. uluhlu | -60 ukuya kuma-180 °C |
| Ukuchaneka | ±0.7 K [-20…+60 °C ], ±1 K ngenye indlela | |
| Isigqibo | 0.1 K | |
| PTC1000 | Meas. uluhlu | -60…+80 °C |
| Ukuchaneka | ±0.7 K [-20…+60 °C ], ±1 K ngenye indlela | |
| Isigqibo | 0.1 K | |
| NTC10k | Meas. uluhlu | -50 ukuya kuma-200 °C |
| Ukuchaneka | ± 1 K [-30…+200 °C] | |
| Isigqibo | 0.1 K | |
| NTC5k | Meas. uluhlu | -50 ukuya kuma-150 °C |
| Ukuchaneka | ± 1 K [-35…+150 °C] | |
| Isigqibo | 0.1 K | |
| Igalelo ledijithali | Ukuvuselela | Umqulutagunxibelelwano lwe-e-free |
| Ukucoca uqhagamshelwano | 20 mA | |
| Olunye uphawu | Umsebenzi wokubala i-Pulse 150 ms ixesha lokugxeka |
Igalelo ledijithali: DI1, DI2
| Uhlobo | Uphawu | Idatha |
| Umqulutage free | Ukuvuselela | Umqulutagunxibelelwano lwe-e-free |
| Ukucoca uqhagamshelwano | 20 mA | |
| Olunye uphawu | Ubuninzi bomsebenzi wokubala i-Pulse. 2 kHz |
Imveliso ye-analog: AO1, AO2, AO3
| Uhlobo | Uphawu | Idatha |
| Max. umthwalo | 15 mA | |
| 0 - 10 V | Ukuchaneka | Umthombo: 0.5% FS |
| I-Sink 0.5% FS ye-Vout> 0.5 V 2% FS yonke uluhlu (I<=1mA) | ||
| Isigqibo | 0.1% FS | |
| Async PWM | Umqulutagimveliso | I-Vout_Lo Max = 0.5 V Vout_Hi Min = 9 V |
| Uluhlu lokuphindaphinda | 15 Hz – 2 kHz | |
| Ukuchaneka | 1% FS | |
| Isigqibo | 0.1% FS | |
| Sync PWM/PPM | Umqulutagimveliso | I-Vout_Lo Max = 0.4 V Vout_Hi Min = 9 V |
| Ukuphindaphinda | Iifrikhwensi ezingundoqo x 2 | |
| Isigqibo | 0.1% FS |
Imveliso yedijithali
| Uhlobo | Idatha |
| DO1, DO2, DO3, DO4, DO5 | |
| Udluliselo | SPST 3 A Nominal, 250 V AC 10k imijikelo yomthwalo ochasayo UL: FLA 2 A, LRA 12 A |
| DO5 for Mid+ | |
| Ukuhanjiswa kweSolid State | SPST 230 V AC / 110 V AC / 24 V AC max 0.5 A |
| I-Do6 | |
| Udluliselo | SPDT 3 A Nominal, 250 V AC 10k imijikelo imithwalo resistive |
| Ukwahlula phakathi kwe-relay kwiqela le-DO1-DO5 liyasebenza. Ukwahlula phakathi kweqela le-DO1-DO5 kunye ne-DO6 kuqiniswa. | |
| Imveliso yeStepper motor (A1, A2, B1, B2) | |
| Bipolar / Unipolar | Iivalve zeDanfoss: • ETS / KVS / ETS C / KVS C / CCMT 2–CCMT 42 / CTR • ETS6 / CCMT 0 / CCMT 1 Ezinye iivalvu: • Isantya 10 - 300 pps • Imodi yokuqhuba inyathelo elipheleleyo - 1/32 microstep • Ubuninzi. Inqanaba eliphezulu langoku: 1 A • Amandla emveliso: 10 W peak, 5 W avareji |
| Ugcino lwebhetri | Ibhetri ye-V: 18 - 24 V DC (1), max. amandla 11 W, min. umthamo 0.1 Wh |
Imveliso yamandla e-Aux
| Uhlobo | Uphawu | Idatha |
| + 5 iV | +5 V DC | Ubonelelo lwenzwa: 5 V DC / 80 mA |
| + 15 iV | +15 V DC | Ubonelelo lwenzwa: 15 V DC / 120 mA |
Idatha yomsebenzi
| Idatha yomsebenzi | Ixabiso |
| Bonisa | I-LCD 128 x 64 pixel (080G6016) |
| I-LED | Uhlaza, iOrenji, i-LED eBomvu elawulwa sisicelo sesoftware. |
| Umdibaniso womboniso wangaphandle | RJ12 |
| Unxibelelwano lwedatha eyakhelwe-ngaphakathi | MODBUS, BACnet ye-fieldbus kunye nonxibelelwano kwiinkqubo ze-BMS. I-SMNP yonxibelelwano kwiinkqubo ze-BMS. HTTP(S), MQTT(S) yonxibelelwano ukuya web iibhrawuza kunye nelifu. |
| Ukuchaneka kwewotshi | +/- 15 ppm @ 25 °C, 60 ppm @ (-20 ukuya +85 °C) |
| Ugcino lwamandla ebhetri yekloko | Iintsuku ezi-3 @ 25 °C |
| USB-C | I-USB Version 1.1/2.0 isantya esiphezulu, inkxaso ye-DRP kunye ne-DRD. Max. yangoku 150 mA Ukudibanisa kwipen drive kunye nelaptop (jonga kwiSikhokelo soMsebenzisi). |
| Ukunyuka | I-DIN kaloliwe, indawo ethe nkqo |
| Izindlu zeplastiki | Ukuzicima ngokwakho i-V0 kunye novavanyo locingo olukhanyayo/olushushu kwi-960 °C. Uvavanyo lwebhola: 125 °C Ukuvuza okwangoku: ≥ 250 V ngokwe-IEC 60112 |
| Uhlobo lolawulo | Idityaniswe kwiKlasi I kunye / okanye izixhobo zombane ze-II |
| Uhlobo lwesenzo | 1C; 1Y yoguqulelo ngeSSR |
| Ixesha loxinzelelo lombane kwi-insulating | Inde |
| Ungcoliseko | Ilungele ukusetyenziswa kwindawo eneqondo longcoliseko 2 |
| Ukungakhuseleki ngokuchasene nomthamotagenyuka | Udidi II |
| Iklasi yeSoftware kunye nesakhiwo | iklasi A |
Imeko yokusingqongileyo
| Imeko yokusingqongileyo | Ixabiso |
| Uluhlu lweqondo lobushushu kwi-ambient, lusebenza [°C] | -40 ukuya +70 °C kwiLite, Mid, Pro versions. -40 ukuya +70 °C yeMid +, iinguqulelo zePro + ngaphandle kokwandiswa kwe-I/O eqhotyoshelweyo. -40 ukuya +65 °C ngenye indlela. |
| Uluhlu lweqondo lobushushu kwi-ambient, ezothutho [°C] | -40 ukuya +80 °C |
| Ireyithingi yendawo evalekileyo ye-IP | IP20 IP40 ngaphambili xa ipleyiti okanye isibonisi sinyuswa |
| Uluhlu lokufuma oluhambelanayo [%] | 5 – 90%, hayi ukujiya |
| Max. ukuphakama kofakelo | 2000 m |
Ingxolo yombane
Iikheyibhile zabenzi boluvo, umthamo ophantsitage Igalelo le-DI kunye nonxibelelwano lwedatha kufuneka lugcinwe lwahlukileyo kwezinye iintambo zombane:
- Sebenzisa iitreyi zentambo ezahlukeneyo
- Gcina umgama phakathi kweentambo ubuncinci be-10 cm
- Gcina iintambo ze-I/O zimfutshane kangangoko
Iingqwalasela zofakelo
- Umlawuli kufuneka afakwe kuphela, anikwe inkonzo kwaye ahlolwe ngabasebenzi abaqeqeshiweyo kunye nokuthobela imimiselo kazwelonke neyengingqi.
- Phambi kokusetyenzwa kwesixhobo, umlawuli kufuneka anqunyulwe kumandla ombane ngokuhambisa iswitshi engundoqo kwi-OFF.
- Ukusebenzisa umthamo wonikezelotage ngaphandle kokuchazwa kungonakalisa kakhulu inkqubo.
- Lonke ukhuseleko umthamo ophantsi kakhulutagUqhagamshelo lwe-e (amagalelo e-analogu kunye nedijithali, iziphumo ze-analogue, uqhagamshelo lweebhasi ezilandelelanayo, izixhobo zombane) kufuneka zibe nokugqunyelelwa okufanelekileyo kumbane oyintloko.
- Gwema ukubamba okanye uphantse ubambe izinto ze-elektroniki ezifakwe kwiibhodi ukuphepha ukukhutshwa kwe-electrostatic ukusuka kumqhubi ukuya kumacandelo, okunokubangela umonakalo omkhulu.
- Musa ukucinezela i-screwdriver kwizihlanganisi ngamandla amaninzi, ukuphepha ukulimaza umlawuli.
- Ukuqinisekisa ukupholisa kwe-convection okwaneleyo sincoma ukuba ungathinteli ukuvuleka komoya.
- Umonakalo owenziwe ngengozi, ufakelo olulambathayo, okanye iimeko zesiza zinokubangela ukungasebenzi kakuhle kwenkqubo yolawulo, kwaye ekugqibeleni kukhokelele ekonakaleni kwesityalo.
- Lonke ukhuseleko olunokwenzeka lufakwe kwiimveliso zethu ukunqanda oku. Nangona kunjalo, ukufakela okungalunganga kusenokubangela iingxaki. Ulawulo lwe-elektroniki alunakuthatha indawo yesiqhelo, ubunjineli obulungileyo.
- Ngexesha lofakelo, qinisekisa ukuba indlela efanelekileyo iyenziwa ukunqanda ucingo ukuba lukhululeke kwaye ludale umngcipheko onokwenzeka malunga nokothuka okanye umlilo.
- I-Danfoss ayiyi kuba noxanduva lwazo naziphi na iimpahla, okanye amacandelo ezityalo, ezonakalisiweyo ngenxa yeziphene ezingentla. Luxanduva lomfakeli ukujonga ukufakela ngokucokisekileyo kwaye alungele izixhobo eziyimfuneko zokhuseleko.
- I-arhente ye-Danfoss yendawo yakho iya kuvuya ukukunceda ngeengcebiso ezingaphezulu.
Izatifikethi, izibhengezo, kunye nemvume (iyaqhubeka)
| Phawula(4) | Ilizwe |
| CE | EU |
| culus (kuphela AS-PS20) | I-NAM (eUS naseKhanada) |
| I-CuRus | I-NAM (eUS naseKhanada) |
| RCM ulwandiso | Australia / New Zealand |
| I-EAC | EArmenia, eKyrgyzstan, eKazakhstan |
| UA | Yukreyini |
Uluhlu luqulethe ukuvunywa okuphambili okunokwenzeka kolu hlobo lwemveliso. Inombolo yekhowudi yomntu inokuba nezinye okanye zonke ezi mvume, kwaye iimvume ezithile zasekuhlaleni zisenokungaveli kuluhlu.
Olunye ulwamkelo lusenokuba lusaqhubeka kwaye olunye lungatshintsha ekuhambeni kwexesha. Ungajonga eyona meko yangoku kumakhonkco aboniswe ngezantsi.
Isibhengezo se-EU sokuthobela sinokufumaneka kwikhowudi ye-QR.
Ulwazi malunga nokusetyenziswa kunye neefriji ezinokutsha kunye nezinye zinokufumaneka kwiSibhengezo soMvelisi kwikhowudi ye-QR.
Ulwazi malunga nokusetyenziswa kunye neefriji ezinokutsha kunye nezinye zinokufumaneka kwiSibhengezo soMvelisi kwikhowudi ye-QR.
DanfossA/S
Izisombululo zeMozulu • danfoss.com • +45 7488 2222
Naluphi na ulwazi, kubandakanywa, kodwa aluphelelanga kulwazi malunga nokukhethwa kwemveliso, ukusetyenziswa kwayo okanye ukusetyenziswa, ukuyila kwemveliso, ubunzima, imilinganiselo, umthamo okanye nayiphi na enye idatha yobugcisa kwiincwadi zemveliso, iinkcazo zeekhathalogu, iintengiso, njl. , ngomlomo, ngekhompyutha, kwi-intanethi okanye ngokukhuphela, kuya kuthathwa njengokufundisa, kwaye kuyabophelela kuphela ukuba kwaye ukuya kuthi ga kwinqanaba, ireferensi ecacileyo yenziwe kwikoteyishini okanye kwisiqinisekiso somyalelo. UDanfoss akanakwamkela naluphi na uxanduva lweempazamo ezinokwenzeka kwiikhathalogu, iincwadana, iividiyo kunye nezinye izinto. I-Danfoss inelungelo lokutshintsha iimveliso zayo ngaphandle kwesaziso. Oku kusebenza nakwiimveliso ezi-odolwe kodwa hayi
zinikezelwe ngaphandle kokuba olo tshintsho lunokwenziwa ngaphandle kotshintsho kwimo, yona okanye umsebenzi wemveliso.
Zonke iimpawu zokuthengisa kule nto ziyipropati yeDanfoss A/5 okanye iinkampani zeqela leDanfoss. UDanfoss kunye nelogo yeDanfoss ziimpawu zorhwebo zikaDanfoss A/5. Onke Amalungelo Agciniwe.
FAQ
Umbuzo: Ndingafikelela njani kwi- web phambi kwesiphelo se-AS-CX06?
A: Ngenisa idilesi ye-IP kwindawo oyithandayo web umkhangeli zincwadi. Iziqinisekiso ezihlala zihleli zezi: Umsebenzisi oMiselweyo: Umlawuli, Igama Lokugqithisa eliMiselweyo: UMlawuli, Igama Lokugqitha leNani eliMiselweyo: 12345 (yesikrini seLCD).
Q: Yintoni ubude bocingo oluphezulu oluxhaswa yi-RS485 kunye noqhagamshelwano lwe-CAN FD?
A: Uqhagamshelo lwe-RS485 kunye ne-CAN FD luxhasa ubude bocingo ukuya kuthi ga kwi-1000m.
Umbuzo: Ngaba umlawuli we-AS-CX06 unokudityaniswa nabalawuli abaninzi be-AS-CX okanye izixhobo zangaphandle?
A: Ewe, umlawuli we-AS-CX06 uxhasa uxhulumaniso kubalawuli abaninzi be-AS-CX, izinzwa zangaphandle, iinkqubo ze-fieldbus, kunye nokunye.
Amaxwebhu / Izibonelelo
 |
Danfoss AS-CX06 Programmable Controller [pdf] Isikhokelo soFakelo AS-CX06 Lite, AS-CX06 Mid, AS-CX06 Mid, AS-CX06 Pro, AS-CX06 Pro, AS-CX06 Programmable Controller, AS-CX06, Programmable Controller, Controller |