Danfoss AS-CX06 Programmable Controller
Specifications
- Qauv: Programmable maub los Hom AS-CX06
- Qhov ntevLoj: 105mm x 44.5mm x 128mm (tsis muaj LCD zaub)
- Max. Cov Nodes RS485: Mus txog 100
- Max. Baudrate RS485: 125 kbit / s
- Max. Nodes tuaj yeem FD: Mus txog 100
- Max. Baudrate CAN FD: 1 Mbit / s
- Hlau Length RS485: Mus txog 1000 m
- Hlau Length tuaj yeem FD: Mus txog 1000 m
Cov lus qhia siv khoom
Kev sib txuas ntawm qhov system
AS-CX06 maub los tuaj yeem txuas nrog ntau lub tshuab thiab khoom siv, suav nrog:
- RS485 rau BMS (BACnet, Modbus)
- USB-C rau built-in Stepper Driver kev sib txuas
- Kev sib txuas ntawm PC ntawm Pen drive
- Direct Cloud kev twb kev txuas
- Tsheb npav sab hauv rau I/O expansions
- Ethernet ports rau ntau yam kev cai suav nrog Web, BACnet, Modbus, MQTT, SNMP, thiab lwm yam.
- Txuas ntxiv rau AS-CX controllers lossis Alsmart tej thaj chaw deb HMI
RS485 thiab CAN FD Kev Sib Txuas Lus
Lub RS485 thiab CAN FD cov chaw nres nkoj yog siv rau kev sib txuas lus nrog lub tshuab hluav taws xob, BMS, thiab lwm yam khoom siv. Cov ntsiab lus tseem ceeb suav nrog:
- RS485 tsheb npav topology yuav tsum muaj txoj kab txiav nrog sab nraud 120 Ohm resistors ntawm ob qhov kawg hauv qhov chaw cuam tshuam.
- Max. Tus naj npawb ntawm cov nodes rau RS485: Txog 100
- CAN FD kev sib txuas lus yog siv rau kev sib txuas lus nrog rau cov khoom siv sib txuas nrog cov kev xav tau zoo sib xws li RS485.
- Max. Tus naj npawb ntawm cov nodes rau CAN FD: Txog 100
Input thiab Output Boards
AS-CX06 nta sab saum toj thiab hauv qab boards rau ntau yam inputs thiab outputs nrog rau analog thiab digital signals, Ethernet kev sib txuas, roj teeb rov qab module inputs, thiab ntau dua.
Kev txheeb xyuas
| AS-CX06 Lite | 080g6008 ua |
| AS-CX06 Mid | 080g6006 ua |
| AS-CX06 Mid+ | 080g6004 ua |
| AS-CX06 Pro | 080g6002 ua |
| AS-CX06 Pro+ | 080g6000 ua |
Qhov ntev
Tsis muaj LCD zaub
Nrog Snap-on LCD zaub: 080g6016 ua
Kev sib txuas
Qhov system sib txuas
Sab saum toj Board
Hauv qab Board
input rau roj teeb rov qab modules kom ruaj ntseg kaw ntawm hluav taws xob stepper li qub (xws li EKE 2U)
- Muaj tsuas yog nyob rau: Mid+, Pro+
- Muaj tsuas yog nyob rau: Mid, Mid+, Pro, Pro+
- SSR
yog siv nyob rau hauv qhov chaw ntawm SPST relay ntawm Mid +
Cov ntaub ntawv sib txuas lus
Ethernet (tsuas yog rau Pro thiab Pro + versions)
Taw tes rau taw tes lub hnub qub topology nrog lub network hubs / hloov pauv. Txhua AS-CX ntaus ntawv suav nrog kev hloov pauv nrog kev siv tshuab tsis zoo.
- Hom Ethernet: 10/100 TX MDI-X
- Hom kab: CAT5 cable, 100 m max.
- Cable hom connector:j45 ua
Thawj cov ntaub ntawv nkag
Cov cuab yeej tau txais nws qhov chaw nyob IP los ntawm lub network ntawm DHCP.
Txhawm rau txheeb xyuas qhov chaw nyob IP tam sim no, nias ENTER 
nkag mus rau lub neej ntawd cov ntawv qhia zaub mov thiab xaiv Ethernet Chaw.
Sau tus IP chaw nyob hauv koj nyiam web browser nkag mus rau lub web pem hauv ntej kawg. Koj yuav raug coj mus rau qhov kev tshuaj ntsuam nkag nrog cov ntawv pov thawj hauv qab no:
- Default User: Admin
- Default Lo lus zais: Tus thawj tswj hwm
- Default Numeric Password: 12345 (yuav tsum tau siv rau ntawm lub vijtsam LCD) Koj yuav raug ceeb toom kom hloov koj tus password tom qab koj thawj zaug nkag tau zoo.
Nco tseg: tsis muaj ib txoj hauv kev kom rov qab tau tus password tsis nco qab.
RS485: Modbus, BACnet
RS485 cov chaw nres nkoj raug cais tawm thiab tuaj yeem tsim kho raws li tus neeg siv khoom lossis tus neeg rau zaub mov. Lawv yog siv rau fieldbus thiab BMS systems kev sib txuas lus.
Bus topology
Cov lus pom zoo ntawm Cable:
- Twisted khub nrog av: luv leads (piv txwv li <10 m), tsis muaj fais fab kab nyob ze (min. 10 cm).
- Twisted khub + av thiab ntaub thaiv npog: ntev coj (piv txwv li> 10 m), EMC- cuam tshuam ib puag ncig.
Max .. tus naj npawb ntawm cov nodes: mus txog 100
| Hlau ntev (m) | Max. baud nqi | Min. hlau loj |
| 1000 | 125 kbit / s | 0.33mm2-22 AWG |
YOG FD
CAN FD kev sib txuas lus yog siv rau kev sib txuas lus ntawm cov cuab yeej-rau-lub cuab yeej. Nws kuj tseem siv los txuas Alsmart tej thaj chaw deb HMI ntawm chaw nres nkoj zaub.
Bus topology
Cable hom:
- Twisted khub nrog av: luv leads (piv txwv li <10 m), tsis muaj fais fab kab nyob ze (min. 10 cm).
- Twisted khub + av thiab ntaub thaiv npog: ntev ua (piv txwv li> 10 m), EMC disturbed ib puag ncig
Max.. Number of nodes: mus 100
| Hlau ntev (m) 1000 | Max. baudrate CAN | Min. hlau loj |
| 1000 | 50 kbit / s | 0.83mm2-18 AWG |
| 500 | 125 kbit / s | 0.33mm2-22 AWG |
| 250 | 250 kbit / s | 0.21mm2-24 AWG |
| 80 | 500 kbit / s | 0.13mm2-26 AWG |
| 30 | 1 Mbit / s | 0.13mm2-26 AWG |
Kev teeb tsa ntawm RS485 thiab CAN FD
- Ob leeg fieldbuses yog ob hom hlau sib txawv, thiab nws yog ib qho tseem ceeb rau kev sib txuas lus txhim khu kev qha kom txuas tag nrho cov chav nyob hauv ib lub network nrog rau hauv av.
Siv ib tug twisted khub ntawm cov xov hlau los txuas cov kev sib txawv ntawm cov cim thiab siv lwm cov xov hlau (example ob twisted khub) rau kev sib txuas hauv av. Rau example:
- Txoj kab txiav tawm yuav tsum muaj nyob rau ntawm ob lub tsheb npav kawg txhawm rau kom muaj kev sib txuas lus zoo.
Txoj kab txiav tawm tuaj yeem ntsia tau rau hauv ob txoj kev sib txawv:- Ua kom luv luv ntawm CAN-FD H thiab R terminals (tsuas yog rau CANbus);
- Txuas 120 Ω resistor ntawm CAN-FD H thiab L terminals rau CANbus lossis A + thiab B- rau RS485.
- Lub installation ntawm cov ntaub ntawv kev sib txuas lus cable yuav tsum tau ua kom raug nrog txaus nyob deb ntawm high voltage kab.
- Cov khoom siv yuav tsum tau txuas nrog raws li "BUS" topology. Qhov ntawd txhais tau hais tias kev sib txuas lus cable yog txuas los ntawm ib lub cuab yeej mus rau lwm yam yam tsis muaj stubs.
Yog hais tias stubs muaj nyob rau hauv lub network, lawv yuav tsum tau khaws cia kom luv li sai tau (<0.3 m ntawm 1 Mbit; <3 m ntawm 50 kbit). Nco ntsoov tias tej thaj chaw deb HMI txuas nrog rau qhov chaw nres nkoj tso saib ua rau lub pob tw.
- Yuav tsum muaj qhov huv si (tsis cuam tshuam) hauv av txuas ntawm txhua yam khoom siv txuas nrog hauv lub network. Cov chav nyob yuav tsum muaj cov av ntab (tsis txuas nrog lub ntiaj teb), uas yog khi ua ke ntawm txhua chav nyob nrog cov xaim hauv av.
- Nyob rau hauv cov ntaub ntawv ntawm peb-tus neeg xyuas pib cable ntxiv rau daim ntaub thaiv npog, daim ntaub thaiv npog yuav tsum tau muab tso rau hauv ib qho chaw nkaus xwb.
Cov ntaub ntawv siab transmitter
Example: DST P110 nrog piv-metric tso zis
ETS Stepper Valve cov ntaub ntawv
Valve cable kev twb kev txuas
Qhov siab tshaj plaws cable ntev30m: ib
CCM / CCMT / CTR / ETS Colibri® / KVS Colibri® / ETS / KVS
| Danfoss M12 kab | Dawb | Dub | Liab | Ntsuab |
| CCM/ETS/KVS Pins | 3 | 4 | 1 | 2 |
| CCMT/CTR/ETS Colibri/KVS Colibri Pins | A1 | A2 | B1 | B2 |
| AS-CX terminals | A1 | A2 | B1 | B2 |
TSI 6
| Hlau xim | Txiv kab ntxwv | Daj | Liab | Dub | Grey |
| AS-CX terminals | A1 | A2 | B1 | B2 | Tsis txuas |
AKV cov ntaub ntawv (tsuas yog rau Mid + version)
Cov ntaub ntawv technical
Hluav taws xob specifications
| Cov ntaub ntawv hluav taws xob | Tus nqi |
| Muab voltage AC/DC [V] | 24V AC / DC, 50/60Hz (1) (2) |
| Fais fab mov [W] | 22W @ 24V AC, min. 60 VA yog transformer siv los yog 30 W DC fais fab mov (3) |
| Hluav taws xob cable dimension [mm2] | 0.2-2.5mm2 rau 5 hli suab connectors 0.14-1.5mm2 rau 3.5 hli suab connectors |
- 477 5 × 20 Series los ntawm LittelFuse (0477 3.15 MXP).
- Siab dua DC voltage tuaj yeem siv tau yog tias kev tswj hwm tau teeb tsa hauv daim ntawv thov uas cov chaw tsim khoom tshaj tawm cov qauv siv thiab cov voltage theem rau kev siv tau SELV/PELV circuits yuav raug suav hais tias tsis muaj kev phom sij los ntawm daim ntawv thov txheej txheem. Tias voltage theem tuaj yeem siv los ua cov khoom siv hluav taws xob txawm tias 60 V DC yuav tsum tsis pub tshaj.
- US: Chav Kawm 2 < 100 VA (3)
- Nyob rau hauv luv luv Circuit Court DC fais fab mov yuav tsum muaj peev xwm muab 6 A rau 5 s los yog nruab nrab tso zis hwj chim <15 W
Input/Output specifications
- Maximum cable ntev: 30m ua
- Analog tswv yim: AI1, AI2, AI3, AI4, AI5, AI6, AI7, AI8, AI9, AI10
| Hom | Feature | Cov ntaub ntawv |
| 0/4-20 mA | Qhov tseeb | ± 0.5% FS |
| Kev daws teeb meem | 1 ua | |
| 0/5 V Radiometric | Kev txheeb ze rau 5V DC cov khoom siv sab hauv (10 - 90%) | |
| Qhov tseeb | ± 0.4% FS | |
| Kev daws teeb meem | 1mv ua | |
| 0-1 V 0-5 V 0-10 V |
Qhov tseeb | ± 0.5% FS (FS npaj tshwj xeeb rau txhua hom) |
| Kev daws teeb meem | 1mv ua | |
| Input tsis kam | > 100 hli | |
| TIAB SA 1000 | Meas. ntau | -60 rau 180 ° C |
| Qhov tseeb | ± 0.7 K [-20… + 60 ° C], ± 1 K lwm yam | |
| Kev daws teeb meem | 0.1 K | |
| PTC1000 | Meas. ntau | -60 ... + 80 ° C |
| Qhov tseeb | ± 0.7 K [-20… + 60 ° C], ± 1 K lwm yam | |
| Kev daws teeb meem | 0.1 K | |
| NTC 10 k | Meas. ntau | -50 rau 200 ° C |
| Qhov tseeb | ± 1 K [-30… + 200 ° C] | |
| Kev daws teeb meem | 0.1 K | |
| NTC 5 k | Meas. ntau | -50 rau 150 ° C |
| Qhov tseeb | ± 1 K [-35… + 150 ° C] | |
| Kev daws teeb meem | 0.1 K | |
| Cov tswv yim digital | Kev txhawb siab | Voltage-dawb tiv tauj |
| Hu rau kev ntxuav | 20 mA | |
| Lwm yam feature | Pulse suav muaj nuj nqi 150 ms denounce lub sijhawm |
Digital input: IB 1, DI 2
| Hom | Feature | Cov ntaub ntawv |
| Voltage dawb | Kev txhawb siab | Voltage-dawb tiv tauj |
| Hu rau kev ntxuav | 20 mA | |
| Lwm yam feature | Pulse suav muaj nuj nqi max. 2 kHz |
Analog tso zis: AO 1, AO 2, AO 3
| Hom | Feature | Cov ntaub ntawv |
| Max. thauj khoom | 15 mA | |
| 0-10 V | Qhov tseeb | Source: 0.5% FS |
| Sink 0.5% FS rau Vout> 0.5 V 2% FS tag nrho ntau yam (I <= 1mA) | ||
| Kev daws teeb meem | 0.1% FS | |
| Async PWM | Voltage cov zis | Vout_Lo Max = 0.5 V Vout_Hi Min = 9 V |
| Ntau zaus | 15 Hz - 2 kHz | |
| Qhov tseeb | 1% FS | |
| Kev daws teeb meem | 0.1% FS | |
| Sync PWM/PPM | Voltage cov zis | Vout_Lo Max = 0.4 V Vout_Hi Min = 9 V |
| Ntau zaus | Mains zaus x 2 | |
| Kev daws teeb meem | 0.1% FS |
Digital tso zis
| Hom | Cov ntaub ntawv |
| DO1, DO2, DO3, DO4, DO5 | |
| Relay | SPST 3 A Nominal, 250 V AC 10k cycles rau resistive loads UL: FLA 2 A, LRA 12 A |
| DO5 rau Mid+ | |
| Kev Sib Sau Tawm Hauv Lub Xeev | SPST 230V AC / 110V AC / 24V AC max 0.5A |
| Ua 6 | |
| Relay | SPDT 3 A Nominal, 250 V AC 10k cycles rau cov khoom hnyav |
| Kev rho tawm ntawm cov relay hauv pawg DO1-DO5 yog ua haujlwm. Kev cais tawm ntawm pawg DO1-DO5 thiab DO6 tau txhawb nqa. | |
| Stepper lub cev muaj zog tso zis (A1, A2, B1, B2) | |
| Bipolar / Unipolar | Danfoss li qub: • ETS / KVS / ETS C / KVS C / CCMT 2–CCMT 42 / CTR • ETS6 / CCMT 0 / CCMT 1 Lwm yam li qub: • Ceev 10 – 300 pps • Tsav hom tag nrho cov kauj ruam – 1/32 microstep • Max. Peak theem tam sim no: 1 A • Tso zis hwj chim: 10 W ncov, 5 W nruab nrab |
| Roj teeb thaub qab | V roj teeb: 18-24V DC (1), max. hwj chim 11 W, min. hwj 0.1w |
Aux fais fab tso zis
| Hom | Feature | Cov ntaub ntawv |
| +5 V | DC + 5 V | Sensor mov: 5V DC / 80 mA |
| +15 V | DC + 15 V | Sensor mov: 15V DC / 120 mA |
Cov ntaub ntawv muaj nuj nqi
| Cov ntaub ntawv muaj nuj nqi | Tus nqi |
| Zaub | LCD zaub 128 x 64 pixels (080G6016) |
| LED | Ntsuab, Txiv kab ntxwv, Liab LED tswj los ntawm software daim ntawv thov. |
| Sab nraud kev sib txuas | RJ 12 |
| Cov ntaub ntawv sib txuas lus built-in | MODBUS, BACnet rau fieldbus thiab kev sib txuas lus rau BMS systems. SMNP rau kev sib txuas lus rau BMS systems. HTTP(S), MQTT(S) rau kev sib txuas lus rau web browsers thiab huab. |
| Lub moos raug | +/- 15 ppm @ 25 ° C, 60 ppm @ (-20 txog + 85 ° C) |
| Lub moos roj teeb thaub qab lub zog cia | 3 hnub @ 25 ° C |
| USB-C | USB Version 1.1/2.0 kev kub ceev, DRP thiab DRD txhawb nqa. Max. tam sim no 150 mA Rau kev sib txuas rau cwj mem tsav thiab lub laptop (saib Cov Lus Qhia Tus Neeg Siv). |
| Mounting | DIN rail, ntsug txoj hauj lwm |
| Yas tsev | Self extinguishing V0 thiab glowing / kub hlau kuaj ntawm 960 ° C. Kev ntsuas pob: 125 ° C Tawm tam sim no: ≥ 250 V raws li IEC 60112 |
| Hom kev tswj | Yuav tsum muab tso rau hauv Chav Kawm I thiab / lossis II cov khoom siv |
| Hom kev ua | 1C; 1Y rau version nrog SSR |
| Lub sij hawm ntawm hluav taws xob kev nyuaj siab hla insulating | Ntev |
| Kev qias neeg | Haum rau siv nyob rau hauv ib puag ncig nrog qib ntawm cov pa phem 2 |
| Kev tiv thaiv tiv thaiv voltage zog | Qeb II |
| Chav kawm software thiab qauv | chav kawm A |
Environmental mob
| Environmental mob | Tus nqi |
| ambient kub ntau, kev khiav hauj lwm [°C] | -40 txog +70 ° C rau Lite, Mid, Pro versions. -40 txog +70 ° C rau Mid +, Pro + versions yam tsis muaj I / O expansions txuas. -40 rau +65 ° C lwm yam. |
| Ambient kub ntau yam, thauj [°C] | -40 rau +80 ° C |
| Kev ntsuam xyuas IP | IP20 IP40 nyob rau pem hauv ntej thaum phaj los yog tso saib |
| Relative humidity ntau [%] | 5-90%, tsis-condensing |
| Max. installation qhov siab | 2000m ua |
Hluav taws xob nrov
Cables rau sensors, tsawg voltage DI inputs thiab cov ntaub ntawv kev sib txuas lus yuav tsum tau muab cais los ntawm lwm yam hluav taws xob cables:
- Siv cov tais nyias nyias
- Khaws ib qhov deb ntawm cov cables yam tsawg kawg 10 cm
- Khaws I/O cables kom luv li sai tau
Kev xav txog kev teeb tsa
- Tus maub los yuav tsum tsuas yog ntsia, muab kev pabcuam thiab tshuaj xyuas los ntawm cov neeg ua haujlwm tsim nyog thiab ua raws li cov cai hauv tebchaws thiab hauv cheeb tsam.
- Ua ntej pab cov cuab yeej siv, tus maub los yuav tsum tau txiav tawm ntawm lub hwj chim mains los ntawm kev txav lub kaw lus tseem ceeb mus rau OFF.
- Kev siv cov khoom siv voltage lwm yam uas tsis tau teev tseg tuaj yeem ua rau lub cev puas tsuaj loj.
- Tag nrho cov kev nyab xeeb ntxiv qis voltage kev sib txuas (analogue thiab digital inputs, analogue outputs, serial bus connections, power supply) yuav tsum muaj rwb thaiv tsev los ntawm lub hwj chim mains.
- Tsis txhob kov lossis ze li kov cov khoom siv hluav taws xob uas txuas rau ntawm cov laug cam kom tsis txhob muaj hluav taws xob tawm ntawm tus neeg teb xov tooj mus rau cov khoom, uas yuav ua rau muaj kev puas tsuaj loj heev.
- Tsis txhob nias lub hau ntswj rau ntawm cov khoom sib txuas nrog lub zog ntau dhau, kom tsis txhob ua rau lub tshuab ua kom puas.
- Txhawm rau kom ua kom txaus convection txias peb pom zoo kom tsis txhob cuam tshuam qhov cua qhib.
- Kev puas tsuaj, kev teeb tsa tsis zoo, lossis qhov chaw nyob tuaj yeem ua rau muaj kev ua haujlwm tsis zoo ntawm cov txheej txheem tswj, thiab thaum kawg ua rau cov nroj tsuag tawg.
- Txhua qhov kev tiv thaiv tau muab tso rau hauv peb cov khoom los tiv thaiv qhov no. Txawm li cas los xij, kev teeb tsa tsis raug tseem tuaj yeem muaj teeb meem. Kev tswj hluav taws xob tsis muaj qhov hloov pauv rau ib txwm muaj, kev coj ua haujlwm zoo.
- Thaum lub sij hawm kev teeb tsa, xyuas kom meej tias txoj kev tsim nyog yog tsim los tiv thaiv cov xaim kom xoob thiab tsim kom muaj kev pheej hmoo ntawm kev poob siab lossis hluav taws.
- Danfoss yuav tsis muaj lub luag haujlwm rau cov khoom lag luam, lossis cov khoom cog, puas vim yog cov teeb meem saum toj no. Nws yog tus installer lub luag hauj lwm los xyuas lub installation kom huv si thiab kom haum rau cov khoom siv kev nyab xeeb tsim nyog.
- Koj tus neeg sawv cev Danfoss hauv zos yuav txaus siab los pab nrog cov lus qhia ntxiv.
Daim ntawv pov thawj, tshaj tawm, thiab kev pom zoo (nyob rau hauv kev kawm)
| Mark(4) | Lub teb chaws |
| CE | EU |
| cULus (tsuas yog rau AS-PS20) | NAM (US thiab Canada) |
| cURus | NAM (US thiab Canada) |
| RCM | Australia/New Zealand |
| EAC | Armenia, Kyrgyzstan, Kazakhstan |
| UA | Ukraine |
Cov npe muaj cov kev pom zoo tseem ceeb rau hom khoom no. Tus lej lej ntawm tus kheej yuav muaj qee qhov lossis tag nrho cov kev pom zoo no, thiab qee qhov kev pom zoo hauv zos yuav tsis tshwm sim hauv daim ntawv.
Qee qhov kev pom zoo yuav tseem tab tom ua thiab lwm qhov tuaj yeem hloov pauv raws sijhawm. Koj tuaj yeem tshawb xyuas qhov xwm txheej tam sim no tshaj plaws ntawm cov kab txuas hauv qab no.
EU tshaj tawm ntawm kev ua raws cai tuaj yeem pom hauv QR code.
Cov ntaub ntawv hais txog kev siv cov tub yees flammable thiab lwm yam tuaj yeem nrhiav tau hauv Daim Ntawv Tshaj Tawm Chaw Tsim Khoom hauv QR code.
Cov ntaub ntawv hais txog kev siv cov tub yees flammable thiab lwm yam tuaj yeem nrhiav tau hauv Chaw Tsim Tshuaj Tshaj Tawm hauv QR code.
DanfossA/S
Kev nyab xeeb kev daws teeb meem • danfoss.com • +45 7488 2222
Txhua yam ntaub ntawv, suav nrog, tab sis tsis txwv rau cov ntaub ntawv ntawm kev xaiv cov khoom, nws daim ntawv thov lossis kev siv, cov khoom tsim, qhov hnyav, qhov ntev, muaj peev xwm lossis lwm yam ntaub ntawv hauv cov khoom siv hauv phau ntawv qhia, cov lus piav qhia, kev tshaj tawm, thiab lwm yam thiab seb puas muaj nyob rau hauv kev sau ntawv , hais lus, hauv tshuab hluav taws xob, hauv kab lossis los ntawm kev rub tawm, yuav tsum suav tias yog cov ntaub ntawv, thiab tsuas yog khi tau yog tias thiab rau qhov twg, cov ntaub ntawv qhia meej yog ua nyob rau hauv cov lus hais lossis kev txiav txim pom zoo. Danfoss tsis tuaj yeem lees txais ib lub luag haujlwm rau qhov ua yuam kev hauv phau ntawv teev npe, daim ntawv qhia, yeeb yaj kiab thiab lwm yam khoom siv. Danfoss tseg txoj cai los hloov nws cov khoom yam tsis muaj ntawv ceeb toom. Qhov no kuj siv tau rau cov khoom xaj tab sis tsis yog
xa tau hais tias xws li kev hloov pauv tuaj yeem ua yam tsis muaj kev hloov pauv rau daim ntawv, nws lossis kev ua haujlwm ntawm cov khoom.
Tag nrho cov cim lag luam hauv cov khoom no yog cov cuab yeej ntawm Danfoss A/5 lossis Danfoss pawg tuam txhab. Danfoss thiab Danfoss logo yog cov cim lag luam ntawm Danfoss A/5. Txhua txoj cai.
FAQ
Q: Kuv tuaj yeem nkag mus tau li cas web pem hauv ntej kawg ntawm AS-CX06?
A: Sau tus IP chaw nyob hauv koj nyiam web browser. Cov ntaub ntawv pov thawj lub neej ntawd yog: Tus Neeg Siv Khoom Siv: Tus Thawj Coj, Tus Password Default: Tus Thawj Coj, Tus Thawj Coj Tus lej Password: 12345 (rau LCD npo).
Q: Dab tsi yog qhov siab tshaj plaws xaim ntev txhawb nqa los ntawm RS485 thiab CAN FD kev sib txuas?
A: Lub RS485 thiab CAN FD kev sib txuas txhawb nqa xaim ntev txog li 1000m.
Q: Puas yog AS-CX06 maub los txuas nrog ntau lub AS-CX maub los lossis lwm yam khoom siv sab nraud?
A: Yog, AS-CX06 maub los txhawb kev sib txuas rau ntau yam AS-CX controllers, sab nraud sensors, fieldbus systems, thiab ntau dua.
Cov ntaub ntawv / Cov ntaub ntawv
 |
Danfoss AS-CX06 Programmable Controller [ua pdf] Daim ntawv qhia kev teeb tsa AS-CX06 Lite, AS-CX06 Mid, AS-CX06 Mid, AS-CX06 Pro, AS-CX06 Pro, AS-CX06 Programmable Controller, AS-CX06, Programmable Controller, Controller |