ʻO Danfoss AS-CX06 mea hoʻoponopono polokalamu
Nā kikoʻī
- Hoʻohālike: Mea hooponopono polokalamu ke ano AS-CX06
- Anana: 105mm x 44.5mm x 128mm (Me ka ʻole o ka hōʻike LCD)
- Max. Nā helu RS485: A hiki i 100
- Max. Baudrate RS485: 125 kbit/s
- Max. Hiki iā Nodes ke FD: A hiki i 100
- Max. Hiki iā Baudrate ke FD: 1 Mbit/s
- Uea Length RS485: A hiki i 1000m
- Uea Length CAN FD: A hiki i 1000m
Nā ʻōlelo hoʻohana huahana
Hui Pūnaehana
Hiki ke hoʻopili ʻia ka mea hoʻokele AS-CX06 i nā ʻōnaehana like ʻole a me nā mea hana, me:
- RS485 i BMS (BACnet, Modbus)
- ʻO USB-C no nā pilina Keaukaha Stepper i kūkulu ʻia
- Hoʻohui PC ma o ka Pen drive
- Hoʻopili ʻo Cloud Direct
- Hoʻonui kaʻa i loko o I/O
- ʻO nā awa Ethernet no nā protocol like ʻole Web, BACnet, Modbus, MQTT, SNMP, etc.
- Hoʻohui i nā mea hoʻokele AS-CX hou a i ʻole HMI mamao Alsmart
RS485 a me CAN FD kamaʻilio
Hoʻohana ʻia nā awa RS485 a me CAN FD no ke kamaʻilio ʻana me nā ʻōnaehana fieldbus, BMS, a me nā mea hana ʻē aʻe. Loaʻa nā kikoʻī koʻikoʻi:
- Pono ka topology kaʻa kaʻa RS485 e hoʻopau i ka laina me nā pale pale 120 Ohm waho ma nā ʻaoʻao ʻelua i kahi pōʻino.
- Max. helu o nā nodes no RS485: A hiki i 100
- Hoʻohana ʻia ke kamaʻilio CAN FD no ka kamaʻilio ʻana me nā mea hoʻohana me nā koi topology like me RS485.
- Max. helu o nā nodes no CAN FD: A hiki i 100
Nā Papa Hoʻokomo a me nā Papa Hoʻopuka
Hōʻike ka AS-CX06 i nā papa luna a lalo no nā mea hoʻokomo a me nā hoʻopuka like ʻole me nā hōʻailona analog a me nā kikohoʻe, nā pilina Ethernet, nā hoʻokomo module back-up, a me nā mea hou aku.
ʻIkepili
| AS-CX06 Lite | 080G6008 |
| AS-CX06 Mid | 080G6006 |
| AS-CX06 Mid+ | 080G6004 |
| AS-CX06 Pro | 080G6002 |
| AS-CX06 Pro+ | 080G6000 |
Anana
Me ka ʻole o ka hōʻike LCD
Me ka Snap-on LCD hōʻike: 080G6016
Hoʻohui
Pili pili ʻōnaehana
Papa kiʻekiʻe
Papa lalo
hoʻokomo no nā modula hoʻihoʻi pākaukau no ka hoʻopaʻa ʻana i ka pani ʻana o nā kiwi stepper uila (e.g. EKE 2U)
- Loaʻa wale ma: Mid+, Pro+
- Loaʻa wale ma: Mid, Mid+, Pro, Pro+
- SSR
hoʻohana ʻia ma kahi o ka SPST relay ma Mid+
Kūkākūkā ʻikepili
Ethernet (no nā mana Pro a me Pro+ wale nō)
E kuhikuhi i ka hoku topology me nā hubs/nā hoʻololi. Hoʻokomo ʻia kēlā me kēia hāmeʻa AS-CX i kahi hoʻololi me ka ʻenehana palekana palekana.
- ʻAno Ethernet: 10/100TX auto MDI-X
- ʻAno uwea: Uea CAT5, 100 m ka nui.
- Hoʻohui ʻano uwear: RJ45
ʻIke mua loaʻa
Loaʻa koke i ka hāmeʻa i kāna helu IP mai ka pūnaewele ma o DHCP.
No ka nānā ʻana i ka helu IP o kēia manawa, e kaomi iā ENTER 
e kiʻi i ka papa kuhikuhi hoʻonohonoho paʻamau a koho iā Ethernet Settings.
E hoʻokomo i ka helu IP ma kāu makemake web polokalamu kele pūnaewele e komo i ka web mua-hope. E kuhikuhi ʻia ʻoe i kahi pale kau inoa me nā hōʻoia paʻamau:
- Mea hoʻohana paʻamau: Admin
- 'Ōlelo huna paʻamau: Lunahooponopono
- Hua'ōlelo helu paʻamau: 12345 (e hoʻohana ʻia ma ka ʻaoʻao LCD) E hoʻoneʻe ʻia ʻoe e hoʻololi i kāu ʻōlelo huna ma hope o kou komo mua ʻana.
Nānā: ʻaʻohe ala e kiʻi i kahi ʻōlelo huna poina.
RS485: Modbus, BACnet
Hoʻokaʻawale ʻia nā awa RS485 a hiki ke hoʻonohonoho ʻia ma ke ʻano he mea kūʻai aku a kikowaena paha. Hoʻohana ʻia lākou no ka fieldbus a me nā ʻōnaehana BMS.
Topology kaʻa
Nā ʻōlelo paipai ʻano uwea:
- wili ʻia me ka lepo: nā alakaʻi pōkole (ie <10 m), ʻaʻohe laina mana ma kahi kokoke (min. 10 cm).
- ʻO hui wili + lepo a me ka pale: nā alakaʻi lōʻihi (ʻo ia hoʻi > 10 m), EMC- hoʻopilikia ʻia ka honua.
Max.. helu o nā node: a hiki i 100
| Ka lōʻihi o ka uea (m) | Max. baud rate | Min. nui uwea |
| 1000 | 125 kbit/s | 0.33 mm2 – 22 AWG |
Hiki iā FD
Hoʻohana ʻia ke kamaʻilio CAN FD no ke kamaʻilio ʻana me nā mea hana. Hoʻohana ʻia ia e hoʻopili iā Alsmart mamao HMI ma o ke awa hōʻike.
Topology kaʻa
ʻAno kelepona:
- wili ʻia me ka lepo: nā alakaʻi pōkole (ie <10 m), ʻaʻohe laina mana ma kahi kokoke (min. 10 cm).
- ʻO hui wili + lepo a me ka pale: nā alakaʻi lōʻihi (ʻo ia hoʻi > 10 m), ka honua hoʻopilikia EMC
Max.. helu o nā node: a hiki i ka 100
| Uea lōʻihi (m) 1000 | Max. baudrate CAN | Min. nui uwea |
| 1000 | 50 kbit/s | 0.83 mm2 – 18 AWG |
| 500 | 125 kbit/s | 0.33 mm2 – 22 AWG |
| 250 | 250 kbit/s | 0.21 mm2 – 24 AWG |
| 80 | 500 kbit/s | 0.13 mm2 – 26 AWG |
| 30 | 1 Mbit/s | 0.13 mm2 – 26 AWG |
Hoʻokomo ʻia o RS485 a me CAN FD
- ʻElua mau ʻano ʻokoʻa uea ʻelua, a he mea nui ia no ke kamaʻilio hilinaʻi e hoʻopili i nā ʻāpana āpau i kahi pūnaewele pū kekahi me kahi uea honua.
E hoʻohana i hoʻokahi wili wili no ka hoʻohui ʻana i nā hōʻailona ʻokoʻa a hoʻohana i kahi uea ʻē aʻe (no ka exampka lua wili lua) no ka hookui ana i ka lepo. No example:
- Pono ka hoʻopau laina ma nā ʻaoʻao kaʻa ʻelua e hōʻoia i ke kamaʻilio kūpono.
Hiki ke hoʻokomo ʻia ka hoʻopau laina ma nā ʻano ʻelua:- E hana i kahi kaapuni pōkole ma nā pahu CAN-FD H a me R (no CANbus wale nō);
- Hoʻohui i kahi pale 120 Ω ma waena o CAN-FD H a me L no ka CANbus a i ʻole A+ a me B- no RS485.
- Pono e hoʻokō pono ʻia ka hoʻokomo ʻana o ke kaula kamaʻilio ʻikepili me kahi mamao kūpono i ka vol kiʻekiʻetage uwea.
- Pono e hoʻopili ʻia nā mea hana e like me ka topology "BUS". ʻO ia hoʻi, ua uea ʻia ke kaula kamaʻilio mai kekahi mea a i kekahi me ka ʻole o nā stubs.
Inā loaʻa nā stubs i loko o ka pūnaewele, pono e mālama ʻia i ka pōkole e like me ka hiki (<0.3 m ma 1 Mbit; <3 m ma 50 kbit). E hoʻomanaʻo i ka HMI mamao i hoʻopili ʻia i ke awa hōʻike e hana i kahi stub.
- Pono e loaʻa kahi pilina maʻemaʻe (ʻaʻole i hoʻopilikia ʻia) ma waena o nā mea āpau i pili i ka pūnaewele. Pono nā ʻāpana he ʻāina lana (ʻaʻole pili i ka honua), i hoʻopaʻa ʻia ma waena o nā ʻāpana āpau me ka uwea lepo.
- I ka hihia o ekolu-conductor cable a me ka pale, pono e hookumu ia ka pale ma kahi hookahi wale no.
ʻIke mea hoʻouna kaomi
Example: DST P110 me ka ratio-metric pukana
ʻIkepili ETS Stepper Valve
Hoʻohui uwea valve
ʻO ka lōʻihi uwea kiʻekiʻe: 30 m
CCM / CCMT / CTR / ETS Colibri® / KVS Colibri® / ETS / KVS
| Danfoss M12 uwea | Keʻokeʻo | ʻeleʻele | ʻulaʻula | ʻōmaʻomaʻo |
| Nā Pin CCM/ETS/KVS | 3 | 4 | 1 | 2 |
| Nā Pins CCMT/CTR/ETS Colibri/KVS Colibri | A1 | A2 | B1 | B2 |
| ʻO nā ʻāpana AS-CX | A1 | A2 | B1 | B2 |
ETS 6
| kala uea | Alani | Melemele | ʻulaʻula | ʻeleʻele | Hinahina |
| ʻO nā ʻāpana AS-CX | A1 | A2 | B1 | B2 | ʻAʻole pili |
ʻIke AKV (no ka mana Mid+ wale nō)
ʻikepili ʻenehana
Nā kikoʻī uila
| ʻIke uila | Waiwai |
| Lako Voltage AC/DC [V] | 24V AC/DC, 50/60 Hz (1)(2) |
| Hāʻawi mana [W] | 22 W @ 24 V AC, min. 60 V A inā hoʻohana ʻia ka mea hoʻololi a i ʻole 30 W DC lako mana (3) |
| Ka ana ʻana o ke kaula uila [mm2] | 0.2 – 2.5 mm2 no nā mea hoʻohui pitch 5 mm 0.14 – 1.5 mm2 no nā mea hoʻohui pitch 3.5 mm. |
- 477 5×20 Series mai LittelFuse (0477 3.15 MXP).
- He kiʻekiʻe DC voltagHiki ke hoʻohana ʻia inā hoʻokomo ʻia ka mana i kahi noi kahi e haʻi ai ka mea hana i kahi maʻamau kuhikuhi a me kahi voltage pae no nā kaapuni SELV/PELV hiki ke ʻike ʻia he mea pōʻino ʻole e ka maʻamau noi. ʻO kēlā voltagHiki ke hoʻohana ʻia ka pae e like me ka hoʻokomo mana ʻoiai ʻaʻole pono e hoʻonui ʻia ka 60 V DC.
- US: Papa 2 < 100 VA (3)
- Ma ke kaapuni pōkole, pono e hiki i ka mana DC ke hāʻawi i ka 6 A no 5 s a i ʻole ka mana puka maʻamau <15 W.
Nā kikoʻī hoʻokomo/puka
- ʻO ka lōʻihi uwea kiʻekiʻe: 30m
- Hoʻokomo hoʻokomo: AI1, AI2, AI3, AI4, AI5, AI6, AI7, AI8, AI9, AI10
| ʻAno | Hiʻona | ʻIkepili |
| 0/4-20 mA | Ka pololei | ± 0.5% FS |
| Olelo Hooholo | 1uA | |
| 0/5 V Radiometric | E pili ana i ka lako o loko 5 V DC (10 – 90 %) | |
| Ka pololei | ±0.4% FS | |
| Olelo Hooholo | 1 mV | |
| 0 – 1 V 0 – 5 V 0 – 10 V |
Ka pololei | ± 0.5% FS (FS i manaʻo ʻia no kēlā me kēia ʻano) |
| Olelo Hooholo | 1 mV | |
| Kūleʻa hoʻokomo | > 100 kOhm | |
| PT1000 | Meas. laula | -60 a i 180 °C |
| Ka pololei | ±0.7 K [-20…+60 °C ], ±1 K i ʻole | |
| Olelo Hooholo | 0.1 K | |
| PTC1000 | Meas. laula | -60…+80 °C |
| Ka pololei | ±0.7 K [-20…+60 °C ], ±1 K i ʻole | |
| Olelo Hooholo | 0.1 K | |
| NTC10k | Meas. laula | -50 a i 200 °C |
| Ka pololei | ± 1 K [-30…+200 °C] | |
| Olelo Hooholo | 0.1 K | |
| NTC5k | Meas. laula | -50 a i 150 °C |
| Ka pololei | ± 1 K [-35…+150 °C] | |
| Olelo Hooholo | 0.1 K | |
| Hoʻokomo hoʻokomo uila | Hoʻoulu ʻana | Voltagpili e-noa |
| Hoʻopili hoʻomaʻemaʻe | 20 mA | |
| ʻO kekahi hiʻohiʻona | Hana helu Pulse 150 ms hōʻole i ka manawa |
Hoʻokomo o Digital: DI1, DI2
| ʻAno | Hiʻona | ʻIkepili |
| Voltage manuahi | Hoʻoulu ʻana | Voltagpili e-noa |
| Hoʻopili hoʻomaʻemaʻe | 20 mA | |
| ʻO kekahi hiʻohiʻona | Hana helu Pulse max. 2 kHz |
Hua'ōlelo analog: AO1, AO2, AO3
| ʻAno | Hiʻona | ʻIkepili |
| Max. ukana | 15 mA | |
| 0 – 10 V | Ka pololei | Puna: 0.5% FS |
| Holoi i ka 0.5% FS no Vout > 0.5 V 2% FS āpau holoʻokoʻa (I<=1mA) | ||
| Olelo Hooholo | 0.1% FS | |
| Async PWM | Voltage hoʻopuka | Vout_Lo Max = 0.5 V Vout_Hi Min = 9 V |
| Laulā pinepine | 15 Hz – 2 kHz | |
| Ka pololei | 1% FS | |
| Olelo Hooholo | 0.1% FS | |
| Hoʻopili PWM/ PPM | Voltage hoʻopuka | Vout_Lo Max = 0.4 V Vout_Hi Min = 9 V |
| Ka pinepine | ʻO ke alapine nui x 2 | |
| Olelo Hooholo | 0.1% FS |
Hua kikohoʻe
| ʻAno | ʻIkepili |
| DO1, DO2, DO3, DO4, DO5 | |
| Relay | SPST 3 A Nominal, 250 V AC 10k mau pōʻai no nā haʻawe pale UL: FLA 2 A, LRA 12 A |
| DO5 no Mid+ | |
| Relay Moku'āina paʻa | SPST 230 V AC / 110 V AC / 24 V AC max 0.5 A |
| C6 | |
| Relay | SPDT 3 A Nominal, 250 V AC 10k pōʻai no nā haʻawe kū'ē |
| Hoʻohana ka hoʻokaʻawale ʻana ma waena o ka relay i ka hui DO1-DO5. Hoʻoikaika ʻia ka hoʻokaʻawale ʻana ma waena o ka hui DO1-DO5 a me DO6. | |
| Huakaʻi kaʻa stepper (A1, A2, B1, B2) | |
| Bipolar/ Unipolar | ʻO nā kiwikā Danfoss: • ETS / KVS / ETS C / KVS C / CCMT 2–CCMT 42 / CTR • ETS6 / CCMT 0 / CCMT 1 Nā pahu hopu ʻē aʻe: • Ka wikiwiki 10 – 300 pps • Ke ʻano hoʻokele kaʻaahi piha – 1/32 microstep • Max. ʻO ka pae kiʻekiʻe o kēia manawa: 1 A • Mana hoopuka: 10 W ka piko, 5 W ka awelika |
| Kākoʻo pākaukau | V pākaukau: 18 – 24 V DC(1), ka nui. mana 11 W, min. kaha 0.1 Wh |
Aux mana puka
| ʻAno | Hiʻona | ʻIkepili |
| +5 V | +5 V DC | Hāʻawi ʻia ka sensor: 5 V DC / 80 mA |
| +15 V | +15 V DC | Hāʻawi ʻia ka sensor: 15 V DC / 120 mA |
ʻIkepili hana
| ʻIkepili hana | Waiwai |
| Hōʻike | LCD 128 x 64 pika (080G6016) |
| LED | ʻOmaomao, ʻAlani, ʻulaʻula LED i hoʻomalu ʻia e ka polokalamu polokalamu. |
| Hoʻohui hōʻike waho | RJ12 |
| ʻIkepili kamaʻilio i kūkulu ʻia | MODBUS, BACnet no ka fieldbus a me ke kamaʻilio ʻana i nā ʻōnaehana BMS. SMNP no ke kamaʻilio ʻana i nā ʻōnaehana BMS. HTTP(S), MQTT(S) no ke kamaʻilio ʻana i web nā polokalamu kele pūnaewele a me ke ao. |
| Ka pololei o ka uaki | +/- 15 ppm @ 25 °C, 60 ppm @ (-20 a +85 °C) |
| Hoʻopaʻa mana hoʻihoʻi ʻana i ka pākaukau | 3 lā @ 25 °C |
| USB-C | USB Version 1.1/2.0 kiʻekiʻe wikiwiki, DRP a me DRD kākoʻo. Max. 150 mA i kēia manawa No ka hoʻopili ʻana i ka penikala peni a me ka pona (e nānā i ke alakaʻi hoʻohana). |
| Ke kau ʻana | DIN rail, kūlana kū pololei |
| Hale palaki | ʻO ka hoʻāʻo ʻana o ka uea ʻālohilohi/wela iā ia iho ma 0 °C. Ho'āʻo pōlele: 960 °C Leakage o kēia manawa: ≥ 125 V e like me IEC 250 |
| ʻAno hoʻomalu | E hoʻohui ʻia i nā mea hana papa I a / a i ʻole II |
| ʻAno hana | 1C; 1Y no ka mana me SSR |
| Ka wā o ke koʻikoʻi uila ma waena o ka insulating | lōʻihi |
| haumia | He kūpono no ka hoʻohana ʻana i nā kaiapuni me ke kiʻekiʻe o ka pollution 2 |
| Ka palekana e kū'ē i ka voltage piʻi ana | Māhele II |
| Papa lako polokalamu a me ka hale | papa A |
Kūlana kaiapuni
| Kūlana kaiapuni | Waiwai |
| ʻO ke ʻano wela o ka honua, e hana ana [°C] | -40 a +70 °C no nā mana Lite, Mid, Pro. -40 a +70 °C no Mid+, Pro+ me ka ʻole o nā hoʻonui I/O i hoʻopili ʻia. -40 a +65 °C inā ʻaʻole. |
| Ka lōʻihi o ka wela, ka lawe ʻana [°C] | -40 a i +80 °C |
| Ka helu IP | IP20 IP40 ma ke alo ke kau ʻia ka pā a hōʻike |
| Launa haʻahaʻa pili [%] | 5 - 90%, non-condensing |
| Max. kiʻekiʻe hoʻonoho | 2000 m |
Ka leo uila
Nā uwea no nā mea ʻike, vol haʻahaʻatagPono e hoʻokaʻawale ʻia nā mea hoʻokomo e DI a me ka kamaʻilio ʻikepili mai nā kaula uila ʻē aʻe:
- E hoʻohana i nā pā uwea ʻokoʻa
- E mālama i kahi mamao ma waena o nā kaula ma kahi o 10 knm
- E mālama i nā kaula I/O i ka pōkole
Nā manaʻo hoʻokomo
- Pono e hoʻokomo wale ʻia ka mea hoʻoponopono, lawelawe ʻia a nānā ʻia e nā limahana kūpono a me ka hoʻokō ʻana i nā lula aupuni a kūloko.
- Ma mua o ka lawelawe ʻana i nā mea hana, pono e hoʻokaʻawale ʻia ka mea hoʻoponopono mai nā mana mana ma ka neʻe ʻana i ka hoʻololi nui o ka ʻōnaehana i OFF.
- Ke hoʻohana nei i kahi voltaghiki i nā mea ʻē aʻe i ʻōlelo ʻia ke hōʻino nui i ka ʻōnaehana.
- ʻO ka palekana a pau loa voltage pili ana (analogue a me kikohoʻe hoʻokomo, analogue outputs, serial bus connections, mana lako) pono e loaʻa i ka pono insulation mai ka mana mains.
- Hōʻalo i ka hoʻopā ʻana a kokoke paha i ka hoʻopā ʻana i nā mea uila i kau ʻia ma nā papa e pale aku i ka hoʻokuʻu ʻana o ka electrostatic mai ka mea hoʻohana i nā ʻāpana, hiki ke hōʻeha nui.
- Mai kaomi i ka screwdriver ma nā mea hoʻohui me ka ikaika nui, i pale aku i ka hōʻino ʻana i ka mea hoʻoponopono.
- I mea e hōʻoia ai i ka lawa o ka hoʻoluʻu convection, paipai mākou ʻaʻole e keʻakeʻa i nā puka makani.
- ʻO ka pōʻino, ka hoʻokomo maikaʻi ʻole ʻana, a i ʻole nā kūlana o ka pūnaewele hiki ke alakaʻi i nā hana ʻino o ka ʻōnaehana hoʻomalu, a hopena i ka haki ʻana o nā mea kanu.
- Hoʻokomo ʻia kēlā me kēia palekana i kā mākou huahana e pale aku i kēia. Eia nō naʻe, hiki i ka hoʻokomo hewa ke loaʻa nā pilikia. ʻAʻole pani nā mana uila no ka hana maʻamau a maikaʻi.
- I ka wā o ka hoʻouka ʻana, e hōʻoia i ka hana ʻana i ke ala kūpono e pale ai i ka uwea e wehe a hana i kahi pilikia e pili ana i ka haʻalulu a i ʻole ke ahi.
- ʻAʻole kuleana ʻo Danfoss no nā waiwai, a i ʻole nā mea kanu i hōʻino ʻia ma muli o nā hemahema ma luna. ʻO ke kuleana o ka mea hoʻonoho ke nānā pono i ka hoʻokomo ʻana a kūpono i nā mea palekana e pono ai.
- E hauʻoli kāu ʻelele Danfoss kūloko e kōkua me nā ʻōlelo aʻo hou.
Nā palapala hōʻoia, nā ʻōlelo hoʻolaha, a me nā ʻae ʻia (ke holomua nei)
| Maka(4) | ʻāina |
| CE | EU |
| cULus (no AS-PS20 wale nō) | NAM (US a me Kanada) |
| cURus | NAM (US a me Kanada) |
| RCM | Australia/Nuilani |
| EAC | ʻAmenia, Kyrgyzstan, Kazakhstan |
| UA | ʻUkelena |
Aia i loko o ka papa inoa nā ʻae kūpono no kēia ʻano huahana. Loaʻa paha i ka helu helu pākahi kekahi o kēia mau ʻae a pau, a ʻaʻole ʻike ʻia kekahi mau ʻae kūloko ma ka papa inoa.
Ke hoʻomau nei paha kekahi mau ʻae ʻia a hoʻololi paha kekahi i ka wā. Hiki iā ʻoe ke nānā i ke kūlana o kēia manawa ma nā loulou i hōʻike ʻia ma lalo nei.
Hiki ke loaʻa ka ʻōlelo hoʻohālikelike o EU ma ka QR code.
Hiki ke ʻike ʻia ka ʻike e pili ana i ka hoʻohana ʻana me nā mea hoʻoheheʻe ahi a me nā mea ʻē aʻe ma ka ʻŌlelo Mea Hana ma ka QR code.
Hiki ke ʻike ʻia ka ʻike e pili ana i ka hoʻohana ʻana me nā mea hoʻoheheʻe ahi a me nā mea ʻē aʻe ma ka Mea Hana Hoʻolaha ma ka QR code.
ʻO DanfossA/S
Nā Hoʻoponopono Klima • danfoss.com • +45 7488 2222
ʻO kēlā me kēia ʻike, me, akā ʻaʻole i kaupalena ʻia i ka ʻike e pili ana i ke koho ʻana o ka huahana, kāna noi a hoʻohana ʻana paha, hoʻolālā huahana, paona, ana, hiki a i ʻole nā ʻikepili ʻenehana ʻē aʻe i loko o nā manual huahana, wehewehe wehewehe, hoʻolaha, etc. , ma ka waha, ma ka uila, ma ka laina a ma o ka hoʻoiho ʻana, e manaʻo ʻia he ʻike, a paʻa wale nō inā a i ka laulā, hana ʻia ka ʻōlelo kikoʻī ma kahi ʻōlelo a i ʻole ka hōʻoia kauoha. ʻAʻole hiki iā Danfoss ke ʻae i kekahi kuleana no nā hewa i hiki ke loaʻa i nā papa inoa, nā puke, nā wikiō a me nā mea ʻē aʻe. Loaʻa iā Danfoss ke kuleana e hoʻololi i kāna mau huahana me ka ʻole o ka ʻike. Pili kēia i nā huahana i kauoha ʻia akā ʻaʻole
hāʻawi ʻia inā hiki ke hana ʻia ia mau hoʻololi me ka ʻole o ka hoʻololi ʻana i ke ʻano, ʻo ia a i ʻole ka hana o ka huahana.
ʻO nā hōʻailona kālepa a pau i loko o kēia mea waiwai nā Danfoss A/5 a i ʻole nā hui pūʻulu Danfoss. ʻO Danfoss a me ka logo Danfoss nā hōʻailona o Danfoss A/5. Ua mālama ʻia nā kuleana āpau.
FAQ
N: Pehea e hiki ai iaʻu ke komo i ka web mua-hope o ka AS-CX06?
A: E hoʻokomo i ka helu IP i kāu makemake web polokalamu kele pūnaewele. ʻO nā hōʻoia paʻamau: Mea hoʻohana Default: Admin, Password Default: Administrator, Default Numeric Password: 12345 (no ka pale LCD).
Nīnau: He aha ka lōʻihi o ke kelepona i kākoʻo ʻia e ka RS485 a me CAN FD pili?
A: ʻO ka RS485 a me CAN FD pili e kākoʻo i ka lōʻihi uea a hiki i 1000m.
Nīnau: Hiki ke hoʻopili ʻia ka mea hoʻokele AS-CX06 i nā mea hoʻokele AS-CX he nui a i ʻole nā mea hana waho?
A: ʻAe, kākoʻo ka mea hoʻokele AS-CX06 i nā pilina me nā mea hoʻokele AS-CX he nui, nā ʻike waho, nā ʻōnaehana fieldbus, a me nā mea hou aku.
Palapala / Punawai
 |
ʻO Danfoss AS-CX06 mea hoʻoponopono polokalamu [pdf] Alakaʻi hoʻokomo AS-CX06 Lite, AS-CX06 Mid, AS-CX06 Mid, AS-CX06 Pro, AS-CX06 Pro, AS-CX06 Mea Hoʻopololei, AS-CX06, Mea Hoʻoponopono Polokalamu, Mea Hoʻoponopono |