Danfoss AS-CX06 Polokalama Pule Fa'apipi'i Taiala

RS485 ma CAN FD Fesootaiga
O le RS485 ma le CAN FD ports e fa'aogaina mo feso'ota'iga ma faiga fa'aoga, BMS, ma isi masini. O fa'amatalaga autu e aofia ai:

RS485 pasi topology e tatau ona i ai laina fa'amuta ma fafo 120 Ohm tetee i pito uma e lua i se siosiomaga fa'alavelave.

Max. numera o nodes mo RS485: E oʻo atu i le 100
CAN FD feso'ota'iga e fa'aoga mo feso'ota'iga masini-i-masini fa'atasi ai ma mana'oga fa'ato'aga pei ole RS485.

Max. numera o nodes mo CAN FD: E oʻo atu i le 100

Komiti Fa'atino ma Galuega Fa'atino
O le AS-CX06 o loʻo faʻaalia ai laupapa pito i luga ma lalo mo faʻaoga eseese ma gaioiga e aofia ai faʻailoga analog ma numera, fesoʻotaʻiga Ethernet, mea faʻapipiʻi faʻapipiʻi i luga o le maa, ma isi mea.

Fa'ailoaga

AS-CX06 Lite	080G6008
AS-CX06 Mid	080G6006
AS-CX06 Mid+	080G6004
AS-CX06 Pro	080G6002
AS-CX06 Pro+	080G6000

Fua

E leai se fa'aaliga LCD

Faatasi ai ma le fa'aaliga LCD Snap-on: 080G6016

So'oga

Faiga fesoʻotaʻigaTop Komiti Faatino
Komiti Faatino Lalo
fa'aoga mo mea fa'apipi'i i tua maa e fa'amautu ai le tapuni o va'a fa'aeletoroni stepper (fa'ata'ita'iga EKE 2U)

E na'o: Mid+, Pro+
E na'o: Mid, Mid+, Pro, Pro+

SSR o lo'o fa'aoga ile nofoaga ole SPST relay ile Mid+

Fesootaiga fa'amaumauga

Ethernet (na'o le Pro ma le Pro+ versions)Fa'asino i le fetu fa'asinomaga fa'atasi ma feso'ota'iga hubs/sui. O masini AS-CX ta'itasi e tu'ufa'atasia se ki fa'atasi ai ma tekonolosi fa'aletonu.

Ituaiga Ethernet: 10/100TX ta'avale MDI-X
Ituaiga uaea: CAT5 uaea, 100 m maualuga.
Feso'ota'i ituaiga uaear: RJ45

Fa'amatalaga avanoa muamua
E otometi lava ona maua e le masini lona tuatusi IP mai le upega tafailagi e ala ile DHCP.

Ina ia siaki le tuatusi IP o loʻo iai nei, lolomi ENTER e fa'aoga i le lisi o fa'atonuga ma filifili Fa'atonu Ethernet.

Ulufale le tuatusi IP ile mea e te mana'o iai web browser e maua ai le web pito i luma. O le a fa'atonuina oe i se mata e saini ai ma fa'ailoga fa'aletonu nei:

Tagata fa'aoga masani: Pule
Upu faataga le aoga: Pule
Fa'ailoga Numera Fa'asinomaga: 12345 (e fa'aoga ile mata LCD) O le a fa'amalosia oe e sui lau fa'aupuga pe a uma lau saini manuia muamua.

Fa'aaliga: e leai se auala e toe maua mai ai se upu faataga galo.

RS485: Modbus, BACnet
RS485 ports e tu'ufua ma e mafai ona fa'atulagaina e avea ma tagata fa'atau po'o se 'au'aunaga. O lo'o fa'aaogaina mo le fieldbus ma feso'ota'iga BMS.

Topology pasiFautuaga ituaiga uaea:

Pa'iga milo ma le 'ele'ele: pupu'u ta'ita'i (ie <10 m), leai ni laina eletise e latalata (min. 10 cm).
Palua milo + eleele ma talita: ta'ita'i umi (ie >10 m), EMC- le siosiomaga fa'alavelave.

Max.. numera o nodes: e oo atu i le 100

Umi ole uaea (m)	Max. paud rate	Min. tele uaea
1000	125 kbit/s	0.33 mm2 – 22 AWG

MAFAI FD
CAN FD feso'ota'iga e fa'aoga mo feso'ota'iga masini-i-masini. E fa'aogaina fo'i e fa'afeso'ota'i le Alsmart mamao HMI e ala ile fa'aaliga uafu.

Topology pasiNumera o le Cable:

Pa'iga milo ma le 'ele'ele: pupu'u ta'ita'i (ie <10 m), leai ni laina eletise e latalata (min. 10 cm).

Palua milo + eleele ma talita: ta'ita'i umi (ie> 10 m), siosiomaga fa'alavelave EMC

Max.. numera o nodes: e oo atu i le 100

Umi uaea (m) 1000	Max. baudrate MAFAI	Min. tele uaea
1000	50 kbit/s	0.83 mm2 – 18 AWG
500	125 kbit/s	0.33 mm2 – 22 AWG
250	250 kbit/s	0.21 mm2 – 24 AWG
80	500 kbit/s	0.13 mm2 – 26 AWG
30	1 Mbit/s	0.13 mm2 – 26 AWG

Faʻapipiʻiina o le RS485 ma le CAN FD

O pasi uma e lua e lua ituaiga uaea eseese, ma e taua tele mo fesoʻotaʻiga faʻalagolago e faʻafesoʻotaʻi uma iunite i totonu o fesoʻotaʻiga ma se uaea eleele.
Fa'aaoga se uaea milo se tasi e fa'afeso'ota'i ai fa'ailoga eseese ma fa'aoga le isi uaea (mo fa'aample se lua mimilo pea) mo le faʻafesoʻotaʻi o le eleele. Mo exampLe:
E tatau ona iai le fa'amuta laina i pito uma o pasi e fa'amautinoa ai feso'ota'iga lelei.
E mafai ona faʻapipiʻi le faʻamutaina o laina i ni auala eseese se lua:
1. Fai se ta'amilosaga pupuu ile CAN-FD H ma le R (na'o le CANbus);
2. Fa'afeso'ota'i le 120 Ω tete'e i le va o CAN-FD H ma L fa'amau mo le CANbus po'o le A+ ma le B- mo RS485.
O le fa'apipi'iina o le uaea feso'ota'iga fa'amatalaga e tatau ona fa'atino sa'o ma lava le mamao i vol maualugatagu uaea.
E tatau ona fesoʻotaʻi masini e tusa ai ma le topology "BUS". O lona uiga o le uaea feso'ota'iga e feso'ota'i mai le tasi masini i le isi e aunoa ma ni fa'amau.
Afai o lo'o i ai ni fa'amau i le feso'otaiga, e tatau ona fa'apuupuu pe a mafai (<0.3 m i le 1 Mbit; <3 m i le 50 kbit). Manatua o le HMI mamao e feso'ota'i i le fa'aaliga uafu e fai ai se fa'amau.

E tatau ona i ai se eleele mama (e le faʻalavelave) fesoʻotaʻiga i le va o masini uma e fesoʻotaʻi i le fesoʻotaʻiga. O iunite e tatau ona i ai le eleele opeopea (e le fesootai i le eleele), lea e nonoa faatasi i le va o iunite uma ma le uaea eleele.
I le tulaga o le tolu-coductor cable ma le talipupuni, o le talipupuni e tatau ona faʻavae i le tasi nofoaga.

Fa'amatalaga fa'asalalauga fa'amalosi
Example: DST P110 fa'atasi ai ma fua fa'atatau-metricETS Stepper Valve faʻamatalagaSo'oga uaea alavai
Le umi ole uaea maualuga: 30m

CCM / CCMT / CTR / ETS Colibri® / KVS Colibri® / ETS / KVS

Danfoss M12 uaea	Lanu pa'epa'e	Lanu uliuli	Lanu mumu	Lanu meamata
CCM/ETS/KVS Pins	3	4	1	2
CCMT/CTR/ETS Colibri/KVS Colibri Pins	A1	A2	B1	B2
AS-CX fa'amau	A1	A2	B1	B2

ETS 6

Lanu uaea	Lanu moli	Lanu samasama	Lanu mumu	Lanu uliuli	Lanu efuefu
AS-CX fa'amau	A1	A2	B1	B2	Le feso'ota'i

AKV fa'amatalaga (na'o le Mid+ version)Fa'amatalaga fa'apitoa

Fa'amatalaga eletise

Fa'amatalaga eletise	Taua
Sapalai voltage AC/DC [V]	24V AC/DC, 50/60 Hz (1)(2)
Sapalai eletise [W]	22 W @ 24 V AC, min. 60 VA pe a fa'aogaina le transformer po'o le eletise DC 30 W (3)
Fuaina uaea eletise [mm2]	0.2 – 2.5 mm2 mo le 5 mm pitch connectors 0.14 – 1.5 mm2 mo 3.5mm pitch connectors

477 5×20 Faasologa mai LittelFuse (0477 3.15 MXP).
A maualuga DC voltage mafai ona faʻaaogaina pe a faʻapipiʻi le pule i totonu o se talosaga lea e faʻaalia ai e le gaosi oloa se tulaga faʻasino ma se voltagu tulaga mo ta'amilosaga SELV/PELV e mafai ona fa'aogaina e fa'apea e le fa'aleagaina e le tulaga fa'aoga. O lena voltagE mafai ona fa'aogaina le maualuga e fai ma fa'aoga eletise e ui e le tatau ona sili atu le 60 V DC.
US: Vasega 2 < 100 VA (3)

I tulaga pu'upu'u le eletise DC e tatau ona mafai ona tu'uina atu le 6 A mo le 5 s po'o le averesi o le malosiaga fa'aulu <15 W

Faʻamatalaga Faʻamatalaga / Faʻamatalaga

Umi ole uaea maualuga: 30m

mea fa'atusa fa'atusa: AI1, AI2, AI3, AI4, AI5, AI6, AI7, AI8, AI9, AI10

Ituaiga	Fa'aaliga	Fa'amaumauga
0/4-20 mA	Sa'o	± 0.5% FS
0/4-20 mA	I'ugafono	1 aA
0/5 V Radiometric		Fa'atatau ile 5 V DC sapalai totonu (10 – 90 %)
	Sa'o	±0.4% FS
	I'ugafono	1 mV
0 – 1 V 0 – 5 V 0 – 10 V	Sa'o	± 0.5% FS (FS fa'amoemoe fa'apitoa mo ituaiga ta'itasi)
	I'ugafono	1 mV
	Tete'e i totonu	>100 kOhm
PT1000	Meas. lautele	-60 i le 180 °C
	Sa'o	±0.7 K [-20…+60 °C ], ±1 K i se isi itu
	I'ugafono	0.1 K
PTC1000	Meas. lautele	-60…+80 °C
	Sa'o	±0.7 K [-20…+60 °C ], ±1 K i se isi itu
	I'ugafono	0.1 K
NTC10k	Meas. lautele	-50 i le 200 °C
	Sa'o	± 1 K [-30…+200 °C]
	I'ugafono	0.1 K
NTC5k	Meas. lautele	-50 i le 150 °C
	Sa'o	± 1 K [-35…+150 °C]
	I'ugafono	0.1 K
Ulufale faafuainumera	Fa'aosofia	Voltagfeso'ota'iga e-saoloto
	Fa'amama fa'afeso'ota'i	20 mA
	Isi vaega	Fa'agaioiga o le faitauina o fatu 150 ms fa'aleaga taimi

fa'aoga numera: DI1, DI2

Ituaiga	Fa'aaliga	Fa'amaumauga
Voltage saoloto	Fa'aosofia	Voltagfeso'ota'iga e-saoloto
	Fa'amama fa'afeso'ota'i	20 mA
	Isi vaega	Fa'agaioiga fa'atatau ole paso max. 2kHz

Galuega fa'atusa: AO1, AO2, AO3

Ituaiga	Fa'aaliga	Fa'amaumauga
	Max. uta	15 mA
0 – 10 V	Sa'o	Punavai: 0.5% FS
	Sa'o	goto 0.5% FS mo Vout > 0.5 V 2% FS vaega atoa (I<=1mA)
	I'ugafono	0.1% FS
Async PWM	Voltagu galuega faatino	Vout_Lo Max = 0.5 V Vout_Hi Min = 9 V
	Fa'asologa o taimi	15 Hz – 2 kHz
	Sa'o	1% FS
	I'ugafono	0.1% FS
Fa'atasi PWM/ PPM	Voltagu galuega faatino	Vout_Lo Max = 0.4 V Vout_Hi Min = 9 V
	Fa'atele	Fa'avevesi fa'avevela x 2
	I'ugafono	0.1% FS

Fa'amatalaga fa'akomepiuta

Ituaiga	Fa'amaumauga
DO1, DO2, DO3, DO4, DO5
Fa'ata'avale	SPST 3 A Nominal, 250 V AC 10k ta'amilosaga mo uta fa'alavelave UL: FLA 2 A, LRA 12 A
DO5 mo Mid+
Mautinoa moligafua Malo	SPST 230 V AC / 110 V AC / 24 V AC maualuga 0.5 A
FAI6
Fa'ata'avale	SPDT 3 A Nominal, 250 V AC 10k taamilosaga mo avega tetee
O le fa'aesea i le va o le ta'avale i le vaega DO1-DO5 o lo'o galue. O le fa'aesea i le va o le DO1-DO5 vaega ma le DO6 ua fa'amalosia.
Fa'aola afi afi (A1, A2, B1, B2)
Bipolar/ Unipolar	Danfoss valve: • ETS / KVS / ETS C / KVS C / CCMT 2–CCMT 42 / CTR • ETS6 / CCMT 0 / CCMT 1 Isi valve: • Saosaoa 10 – 300 pps • La'asaga atoa o le ta'avale - 1/32 microstep • Max. pito maualuga o le taimi nei: 1A • Malosiaga e maua mai ai: 10 W tumutumu, 5 W averesi
Fa'asao maa	V maa: 18 – 24 V DC(1), maualuga. mana 11 W, min. gafatia 0.1 Wh

Aux power output

Ituaiga	Fa'aaliga	Fa'amaumauga
+5 V	+ 5 V DC	Tuuina atu masini: 5 V DC / 80 mA
+15 V	+ 15 V DC	Tuuina atu masini: 15 V DC / 120 mA

Fa'amatalaga galuega

Fa'amatalaga galuega	Taua
Fa'aaliga	LCD 128 x 64 pika (080G6016)
LED	Green, Orange, Red LED e pulea e le polokalama polokalama.
So'oga fa'aaliga fafo	RJ12
Feso'ota'iga fa'amaumauga ua fausia i totonu	MODBUS, BACnet mo fieldbus ma fesoʻotaʻiga i faiga BMS. SMNP mo fesoʻotaʻiga i faiga BMS. HTTP(S), MQTT(S) mo fesootaiga i web su'esu'e ma ao.
Sa'o o le uati	+/- 15 ppm @ 25 °C, 60 ppm @ (-20 i le +85 °C)
Uati faaleoleo malosiaga faaleoleo maa	3 aso @ 25 °C
USB-C	USB Version 1.1 / 2.0 maualuga saoasaoa, DRP ma DRD lagolago. Max. 150 mA o iai nei Mo le feso'ota'iga i le penisini ma le komepiuta (silasila i le User Guide).
Fa'amauina	DIN rail, tulaga tūsa'o
Fale palasitika	V0 e tineia e le tagata lava ia ma su'ega uaea susulu/vevela ile 960 °C. Su'ega polo: 125 °C Lisi le taimi nei: ≥ 250 V e tusa ai ma le IEC 60112
Ituaiga pule	Ia tu'ufa'atasia i masini Vasega I ma/po'o II
Ituaiga o gaioiga	1C; 1Y mo faʻamatalaga ma SSR
Vaitaimi o fa'amamafa fa'aeletise i le fa'a'ese'esega	Umi
Filogia	E talafeagai mo le fa'aoga i si'osi'omaga e iai le maualuga o le fa'aleagaina 2
Puipuiga faasaga i voltage osooso	Vaega II
Vasega polokalame ma fausaga	vasega A

Tulaga o le siosiomaga

Tulaga o le siosiomaga	Taua
Va'aiga o le vevela, galue [°C]	-40 i le +70 °C mo Lite, Mid, Pro lomiga. -40 i le +70 °C mo Mid+, Pro+ fa'aliliuga e aunoa ma fa'aopoopoga I/O fa'apipi'i. -40 i le +65 °C a leai.
Va'aiga o le vevela, felauaiga [°C]	-40 i le +80 °C
Fa'ailoga IP	IP20 IP40 i luma pe a faʻapipiʻi ipu poʻo faʻaaliga
Va'aiga o le susū [%]	5 - 90%, e le faʻafefe
Max. maualuga fa'apipi'i	2000 m

Pisa eletise
Uaea mo masini, maualalo voltagu DI fa'aoga ma feso'ota'iga fa'amatalaga e tatau ona tu'u ese mai isi uaea eletise:

Fa'aaogā fata uaea eseese

Taofi se mamao i le va o uaea ia le itiiti ifo i le 10 cm
Taofi uaea I/O faapuupuu e mafai

Fa'atonuga fa'apipi'i

O le pule e tatau ona fa'apipi'i, tautua ma asiasia e tagata faigaluega agava'a ma ia usita'ia tulafono a le atunu'u ma le lotoifale.
A'o le'i tu'uina atu meafaigaluega, e tatau ona motusia le fa'atonu mai le eletise e ala i le fa'anofoina o le ki fa'aoga i le OFF.
Fa'aaogaina o se sapalai voltage ese mai le fa'amaoti e mafai ona matua fa'aleagaina ai le faiga.

O le saogalemu uma faaopoopo maualalo voltagu feso'ota'iga (mea fa'akomepiuta ma mea fa'akomepiuta, mea fa'atusa, feso'ota'iga pasi pasi, sapalai eletise) e tatau ona i ai le fa'a'ese'ese lelei mai le eletise.
Aloese mai le pa'i pe toetoe a pa'i i mea faaeletonika o lo'o fa'apipi'i i luga o laupapa ina ia 'alofia ai le alu'ese mai le fa'aeletonika i vaega, e ono fa'aleagaina tele.
Aua ne'i oomiina le sikulifili i luga o feso'ota'iga ma le malosi tele, e aloese ai mai le faaleagaina o le pule.

Ina ia mautinoa e lava le malulu o le convection matou te fautuaina e aua le faʻalavelaveina avanoa o le ea.
Fa'alavelave fa'afuase'i, leaga le fa'apipi'iina, po'o tulaga o le nofoaga e mafai ona fa'atupuina ai le fa'aletonu o le fa'atonuga, ma i'u ai ina malepe la'au.
O puipuiga uma e mafai ona tu'ufa'atasia i totonu oa tatou oloa e puipuia ai lenei mea. Ae ui i lea, o se faʻapipiʻi sese e mafai lava ona faʻafitauli. O fa'atonuga fa'aeletonika e le suitulaga i faiga masani fa'ainisinia lelei.

I le taimi o le faʻapipiʻiina, ia mautinoa ua faia se auala talafeagai e puipuia ai se uaea e matala ma faʻatupu ai se tulaga lamatia e tusa ai ma le teʻi poʻo le mu.
Danfoss o le a le nafa ma soʻo se oloa, poʻo vaega o laʻau, ua faʻaleagaina ona o faʻaletonu o loʻo i luga. O le matafaioi a le tagata fa'apipi'i le siakiina mae'ae'a o le fa'apipi'iina ma ia fetaui lelei ma masini mo le saogalemu.
O le a fiafia lou sui o le Danfoss e fesoasoani i nisi fautuaga.

Tusi faamaonia, tautinoga, ma faamaoniga (o loo faagasolo)

Mareko(4)	Atunuu
CE	EU
cULus (na'o le AS-PS20)	NAM (US ma Kanata)
cURus	NAM (US ma Kanata)
fa'aopoopoga RCM	Ausetalia/Niu Sila
EAC	Armenia, Kyrgyzstan, Kazakhstan
UA	Ukraine

O le lisi o lo'o i ai fa'amaoniga autu mo lenei ituaiga oloa. O numera fa'aletagata ta'ito'atasi e ono iai nisi po'o nei fa'atagaga uma, ma nisi fa'atagaga fa'alotoifale e ono le aliali mai ile lisi.

O nisi fa'atagaga atonu o lo'o fa'agasolo pea ma isi e ono suia i le aluga o taimi. E mafai ona e siaki le tulaga sili ona lata mai i sootaga o loʻo faʻaalia i lalo.

E mafai ona maua le tautinoga a le EU i le QR code.

O fa'amatalaga e uiga i le fa'aogaina ma fa'aaisa mu ma isi e mafai ona maua i le Tautinoga a le Faumea i le QR code.

O fa'amatalaga e uiga i le fa'aogaina o pusaaisa mu ma isi e mafai ona maua i le Tautinoga a le Manufacturer i le QR code.

DanfossA/S
Fofo o le Tau • danfoss.com • +45 7488 2222

Soʻo se faʻamatalaga, e aofia ai, ae le gata i faʻamatalaga i luga o le filifilia o oloa, lona faʻaogaina poʻo le faʻaogaina, mamanu o oloa, mamafa, fua, gafatia poʻo soʻo se isi faʻamatalaga faʻapitoa i tusi lesona oloa, faʻamatalaga faʻamatalaga, faʻasalalauga, ma isi ma pe faʻatagaina i se tusitusiga , tautala, fa'aeletoroni, i luga ole laina po'o ala i luga ole laiga, e tatau ona manatu fa'amatalaga, ma e na'o le noatia pe afai ma i le tulaga lautele, o fa'amatalaga manino o lo'o faia i se upusii po'o se fa'amaoniga o poloaiga. E le mafai e Danfoss ona talia so'o se matafaioi mo mea sese i fa'amaumauga, polosiua, vitio ma isi mea. Danfoss e iai le aia tatau e sui ai ana oloa e aunoa ma se faʻaaliga. E fa'aoga foi lea i oloa na oka ae leai
tu'uina atu pe a fa'apea e mafai ona faia ia suiga e aunoa ma ni suiga i le faiga, po'o le fa'atinoga o le oloa.

O fa'ailoga uma o lo'o i totonu o lenei mea o mea totino a le Danfoss A/5 po'o kamupani fa'apotopotoga Danfoss. Danfoss ma le logo Danfoss o fa'ailoga fa'atau a Danfoss A/5. Ua taofia aia tatau uma.

FAQ

Q: E mafai faapefea ona ou mauaina le web pito i luma o le AS-CX06?
A: Ulufale le tuatusi IP ile mea e te manaʻo ai web su'esu'e. O fa'ailoga fa'aletonu o le: Fa'aoga Fa'atonu: Pule, Fa'amatalaga Fa'atonu: Pule, Fa'amatalaga Numera Fa'asinoala: 12345 (mo le mata LCD).

Q: Ole a le maualuga ole umi ole uaea e lagolagoina e le RS485 ma le CAN FD feso'ota'iga?
A: Ole RS485 ma CAN FD feso'ota'iga lagolago umi uaea e o'o atu ile 1000m.

Q: E mafai ona feso'ota'i le fa'atonu AS-CX06 i le tele o fa'atonu AS-CX po'o masini fafo?
A: Ioe, o le AS-CX06 pule e lagolagoina feso'ota'iga i le tele o fa'atonu AS-CX, fa'alogo i fafo, faiga fa'ato'aga, ma isi mea.

Pepa / Punaoa

Danfoss AS-CX06 Polokalama Pule [pdf] Fa'atonu Taiala
AS-CX06 Lite, AS-CX06 Mid, AS-CX06 Mid, AS-CX06 Pro, AS-CX06 Pro, AS-CX06 Polokalama Pule, AS-CX06, Polokalama Pule, Pule

Fa'asinomaga

Tusi Taiala

Danfoss AS-CX06 Polokalama Pule

Fa'amatalaga

Fa'atonuga o le Fa'aaogaina o Mea