Danfoss AS-CX06 Selaoli se ka khonehang
Litlhaloso
- Mohlala: Taolo e hlophisitsoeng ea mofuta oa AS-CX06
- Litekanyo: 105mm x 44.5mm x 128mm (Ntle le pontšo ea LCD)
- Max. Nodes RS485: Ho fihlela ho 100
- Max. Baudrate RS485: 125 kbit/s
- Max. Nodes CAN FD: Ho fihlela ho 100
- Max. Baudrate CAN FD: 1 Mbit/s
- Bolelele ba Wire RS485: Ho fihla ho 1000m
- Bolelele ba Wire CAN FD: Ho fihla ho 1000m
Litaelo tsa Tšebeliso ea Sehlahisoa
Likamano tsa tsamaiso
Taolo ea AS-CX06 e ka hokahana le lits'ebetso le lisebelisoa tse fapaneng, ho kenyelletsa:
- RS485 ho ea ho BMS (BACnet, Modbus)
- USB-C bakeng sa likhokahano tsa Stepper Driver tse hahelletsoeng ka hare
- Khokahano ea PC ka Pen drive
- Khokahano ea Cloud Cloud
- Bese e eang ka hare ho li atoloso tsa I/O
- Likou tsa Ethernet bakeng sa liprothokholo tse fapaneng ho kenyeletsoa Web, BACnet, Modbus, MQTT, SNMP, joalo-joalo.
- Khokahano ho lilaoli tse ling tsa AS-CX kapa Alsmart HMI e hole
RS485 le CAN FD Puisano
Likou tsa RS485 le CAN FD li sebelisetsoa puisano le litsamaiso tsa fieldbus, BMS, le lisebelisoa tse ling. Lintlha tsa bohlokoa li kenyelletsa:
- Topology ea libese ea RS485 e lokela ho ba le ho felisoa ha mela le lihanyetsi tsa kantle tsa 120 Ohm mahlakoreng ka bobeli sebakeng se ferekaneng.
- Max. palo ea li-node tsa RS485: Ho fihla ho 100
- Puisano ea CAN FD e sebelisoa bakeng sa puisano ea sesebelisoa le sesebelisoa ka litlhoko tse tšoanang tsa topology joalo ka RS485.
- Max. palo ea li-node tsa CAN FD: Ho fihla ho 100
Maboto a Kenyeletso le Liphetho
AS-CX06 e na le liboto tse holimo le tse ka tlase bakeng sa lintho tse kenang le tse hlahisoang tse fapaneng ho kenyelletsa le matšoao a analog le a dijithale, likhokahano tsa Ethernet, li-module tsa ho boloka betri, le tse ling.
Boitsebiso
| AS-CX06 Lite | 080G6008 |
| AS-CX06 Mid | 080G6006 |
| AS-CX06 Bohareng+ | 080G6004 |
| AS-CX06 Pro | 080G6002 |
| AS-CX06 Pro+ | 080G6000 |
Litekanyo
Ntle le pontšo ea LCD
Ka pontšo ea LCD ea Snap-on: 080G6016
Lihokelo
Likhokahano tsa sistimi
Boto e holimo
Boto e tlase
ho kenya letsoho bakeng sa li-module tsa ho boloka betri ho boloka ho koaloa ha li-valve tsa elektroniki (mohlala, EKE 2U)
- E fumaneha feela ka: Bohareng+, Pro+
- E fumaneha feela ka: Bohareng, Bohareng+, Pro, Pro+
- SSR
e sebelisoa sebakeng sa SPST relay ho Mid +
Puisano ya data
Ethernet (feela bakeng sa mefuta ea Pro le Pro+)
Supa topology ea linaleli e nang le li-network hubs/switches. Sesebelisoa se seng le se seng sa AS-CX se kenyelletsa sesebelisoa se nang le theknoloji e sireletsehileng.
- Mofuta oa Ethernet: 10/100TX koloi ea MDI-X
- Mofuta oa thapo: Cable ea CAT5, 100 m max.
- Sehokelo sa mofuta oa thapoRj45
Lintlha tsa pele tsa ho kena
Sesebelisoa se fumana aterese ea eona ea IP ho tsoa marang-rang ka DHCP.
Ho sheba aterese ea IP ea hajoale, tobetsa ENTER 
ho fihlella li-setting tsa kamehla ebe u khetha Litlhophiso tsa Ethernet.
Kenya aterese ea IP ho seo u se ratang web seshebisi ho fihlella web qetellong ea bokapele. U tla lebisoa skrineng sa ho kena ka lintlha tse latelang tsa kamehla:
- Mosebelisi ea kamehla: Admin
- Lekunutu la kamehla: Motsamaisi
- Lekunutu la kamehla la Nomoro: 12345 (e tla sebelisoa skrineng sa LCD) U tla khothalletsoa ho fetola phasewete ea hau ka mor'a hore u kene ka katleho qalong.
Hlokomela: ha ho na mokhoa oa ho fumana password e lebetsoeng.
RS485: Modbus, BACnet
Likou tsa RS485 li qheletsoe ka thoko 'me li ka hlophisoa joalo ka moreki kapa seva. Li sebelisetsoa puisano ea litsamaiso tsa fieldbus le BMS.
Topology ea libese
Litlhahiso tsa mofuta oa thapo:
- Apara e sothehileng le mobu: litsela tse khutšoanyane (ke hore <10 m), ha ho na likhoele tsa matla tse haufi (min. 10 cm).
- Para e sothehileng + fatše le thebe: nako e telele (ke hore> 10 m), EMC- tikoloho e ferekaneng.
Max.. palo ea li-node: ho fihla ho 100
| Bolelele ba terata (m) | Max. sekhahla sa bolutu | Min. boholo ba terata |
| 1000 | 125 kbit/s | 0.33 mm2 - 22 AWG |
KA FD
Puisano ea CAN FD e sebelisoa bakeng sa puisano ea sesebelisoa le sesebelisoa. E boetse e sebelisoa ho hokahanya HMI e hole ea Alsmart ka boema-kepe ba pontšo.
Topology ea libese
Mofuta oa Cable:
- Apara e sothehileng le mobu: litsela tse khutšoanyane (ke hore <10 m), ha ho na likhoele tsa matla tse haufi (min. 10 cm).
- Para e sothehileng + fatše le thebe: nako e telele (ke hore> 10 m), EMC tikoloho e ferekaneng
Boholo.. palo ea li-node: ho fihlela ho 100
| Bolelele ba terata (m) 1000 | Max. baudrate KA | Min. boholo ba terata |
| 1000 | 50 kbit/s | 0.83 mm2 - 18 AWG |
| 500 | 125 kbit/s | 0.33 mm2 - 22 AWG |
| 250 | 250 kbit/s | 0.21 mm2 - 24 AWG |
| 80 | 500 kbit/s | 0.13 mm2 - 26 AWG |
| 30 | 1 Mbit/s | 0.13 mm2 - 26 AWG |
Ho kenya RS485 le CAN FD
- Li-fieldbus ka bobeli ke tsa mefuta e 'meli ea terata e fapaneng,' me ke ntho ea bohlokoa bakeng sa puisano e tšepahalang ho hokahanya likarolo tsohle tsa marang-rang le terata ea fatše.
Sebelisa lithapo tse sothehileng bakeng sa ho hokahanya matshwao a fapaneng mme o sebedise terata e nngwe (mohlalaample a second twisted pair) bakeng sa ho kopanya fatshe. Bakeng sa mohlalaampLe:
- Ho emisoa ha mohala ho tlameha ho ba teng lipheletsong tsa libese ka bobeli ho netefatsa puisano e nepahetseng.
Ho felisoa ha line ho ka kenngoa ka litsela tse peli tse fapaneng:- Etsa potoloho e khuts'oane ho li-terminals tsa CAN-FD H le R (bakeng sa CANbus feela);
- Hokela sehanyetsi sa 120 Ω lipakeng tsa CAN-FD H le L bakeng sa CANbus kapa A+ le B- bakeng sa RS485.
- Ho kenngoa ha thapo ea puisano ea data ho tlameha ho etsoa ka nepo le sebaka se lekaneng ho ea holimotage lik'hebole.
- Lisebelisoa li lokela ho hokahanngoa ho latela topology ea "BUS". Seo se bolela hore thapo ea puisano e hoketsoe ho tloha sesebelisoa se seng ho ea ho se seng ntle le li-stubs.
Haeba li-stubs li le teng marang-rang, li lokela ho bolokoa li le khutšoanyane ka hohle kamoo ho ka khonehang (<0.3 m ho 1 Mbit; <3 m ho 50 kbit). Hlokomela hore HMI e hole e hokahaneng le boema-kepe ba ponts'o e etsa stub.
- Ho tlameha ho ba le khokahano ea fatše e hloekileng (e sa sitisoeng) lipakeng tsa lisebelisoa tsohle tse hokahaneng marang-rang. Liyuniti li tlameha ho ba le mobu o phaphametseng (o sa hokahaneng le lefats'e), o tlamelletsoeng hammoho pakeng tsa likarolo tsohle ka terata ea fatše.
- Haeba ho na le lithapo tse tharo tsa li-conductor tse tharo hammoho le thebe, thebe e tlameha ho thehoa sebakeng se le seng feela.
Lintlha tse fetisang khatello
Example: DST P110 e nang le tlhahiso ea karolelano-metric
Lintlha tsa ETS Stepper Valve
Khokahano ea mohala oa valve
Boholo ba bolelele ba cable: 30 m
CCM / CCMT / CTR / ETS Colibri® / KVS Colibri® / ETS / KVS
| Mohala oa Danfoss M12 | Bosoeu | Ntsho | Khubedu | Botala |
| Lithakhisa tsa CCM/ETS/KVS | 3 | 4 | 1 | 2 |
| CCMT/CTR/ETS Colibri/KVS Colibri Pins | A1 | A2 | B1 | B2 |
| Li-terminals tsa AS-CX | A1 | A2 | B1 | B2 |
ETS 6
| 'Mala oa mohala | namunu | Bosehla | Khubedu | Ntsho | Hlooho |
| Li-terminals tsa AS-CX | A1 | A2 | B1 | B2 | Ha e kopane |
Lintlha tsa AKV (feela bakeng sa mofuta oa Mid+)
Lintlha tsa tekheniki
Litlhaloso tsa motlakase
| Lintlha tsa motlakase | Boleng |
| Phepelo voltage AC/DC [V] | 24V AC/DC, 50/60 Hz (1) (2) |
| Phepelo ea motlakase [W] | 22 W @ 24 V AC, min. 60 VA haeba transformer e sebelisoa kapa 30 W DC motlakase (3) |
| Tekanyo ea thapo ea motlakase [mm2] | 0.2 - 2.5 mm2 bakeng sa likhokahanyo tsa sekontiri sa 5 mm 0.14 - 1.5 mm2 bakeng sa likhokahanyo tsa molumo oa 3.5 mm |
- 477 5×20 Series ho tloha LittelFuse (0477 3.15 MXP).
- Molumo o phahameng oa DCtage ka sebelisoa haeba taolo e kentsoe ts'ebetsong moo moetsi a phatlalatsang tekanyetso ea litšupiso le voltagboemo ba li-circuits tsa SELV/PELV tse fihlellehang tse tla nkuoa li se kotsi ho latela maemo a ts'ebeliso. Moqolo ootage ka sebelisoa e le phepelo ea motlakase le hoja 60 V DC e sa tlameha ho fetisoa.
- US: Sehlopha sa 2 <100 VA (3)
- Boemong bo khuts'oane ba potoloho ea motlakase ea DC e tlameha ho fana ka 6 A bakeng sa 5 s kapa ka karolelano matla a tsoang <15 W.
Litlhaloso tsa Input/Output
- Boholo ba bolelele ba cable: 30m
- Kenyelletso ea analog: AI1, AI2, AI3, AI4, AI5, AI6, AI7, AI8, AI9, AI10
| Mofuta | Sebopeho | Lintlha |
| 0/4-20 mA | Ho nepahala | ± 0.5% FS |
| Qeto | 1 Ea | |
| 0/5 V Radiometric | E amanang le 5 V DC phepelo ea ka hare (10 - 90 %) | |
| Ho nepahala | ± 0.4% FS | |
| Qeto | 1 mV | |
| 0 - 1 V 0 - 5 V 0 - 10 V |
Ho nepahala | ± 0.5% FS (FS e reretsoeng ka ho khetheha mofuta o mong le o mong) |
| Qeto | 1 mV | |
| Ho hanyetsa ho kenya | > 100 kOhm | |
| PT1000 | Meea. mefuta-futa | -60 ho isa ho 180 ° C |
| Ho nepahala | ±0.7 K [-20…+60 °C ], ±1 K ho seng joalo | |
| Qeto | 0.1 K | |
| PTC1000 | Meea. mefuta-futa | -60…+80 °C |
| Ho nepahala | ±0.7 K [-20…+60 °C ], ±1 K ho seng joalo | |
| Qeto | 0.1 K | |
| NTC10k | Meea. mefuta-futa | -50 ho isa ho 200 ° C |
| Ho nepahala | ± 1 K [-30…+200 °C] | |
| Qeto | 0.1 K | |
| NTC5k | Meea. mefuta-futa | -50 ho isa ho 150 ° C |
| Ho nepahala | ± 1 K [-35…+150 °C] | |
| Qeto | 0.1 K | |
| Input ea dijithale | Khothatso | Moqtagho ikopanya le e-mahala |
| Ho hloekisa mabitso | 20 mA | |
| Sebopeho se seng | Mosebetsi oa ho bala pulse 150 ms nako ea ho nyatsa |
Kenyelletso ea dijithale: DI1, DI2
| Mofuta | Sebopeho | Lintlha |
| Moqtage lokolohile | Khothatso | Moqtagho ikopanya le e-mahala |
| Ho hloekisa mabitso | 20 mA | |
| Sebopeho se seng | Mosebetsi o moholo oa ho bala pulse. 2 kHz |
Sephetho sa Analog: AO1, AO2, AO3
| Mofuta | Sebopeho | Lintlha |
| Max. morwalo | 15 mA | |
| 0 - 10 V | Ho nepahala | Mohloli: 0.5% FS |
| Sink 0.5% FS bakeng sa Vout > 0.5 V 2% FS whole range (I<=1mA) | ||
| Qeto | 0.1% FS | |
| Async PWM | Moqtagtlhahiso | Vout_Lo Max = 0.5 V Vout_Hi Min = 9 V |
| Sebaka sa maqhubu | 15 Hz - 2 kHz | |
| Ho nepahala | 1% FS | |
| Qeto | 0.1% FS | |
| Khokahanya PWM/ PPM | Moqtagtlhahiso | Vout_Lo Max = 0.4 V Vout_Hi Min = 9 V |
| Khafetsa | Maqhubu a mantlha x 2 | |
| Qeto | 0.1% FS |
Tlhahiso ea dijithale
| Mofuta | Lintlha |
| DO1, DO2, DO3, DO4, DO5 | |
| Relay | SPST 3 A Nominal, 250 V AC 10k cycles bakeng sa meroalo e hanyetsang UL: FLA 2 A, LRA 12 A |
| DO5 bakeng sa Mid + | |
| Motsoako o tiileng oa Naha | SPST 230 V AC / 110 V AC /24 V AC max 0.5 A |
| DO6 | |
| Relay | SPDT 3 A Nominal, 250 V AC 10k cycles bakeng sa meroalo e hanyetsanang |
| Ho itšehla thajana pakeng tsa relay sehlopheng sa DO1-DO5 hoa sebetsa. Ho itšehla thajana pakeng tsa sehlopha sa DO1-DO5 le DO6 ho matlafalitsoe. | |
| Tlhahiso ea enjene ea Stepper (A1, A2, B1, B2) | |
| Bipolar/ Unipolar | Li-valve tsa Danfoss: • ETS / KVS / ETS C / KVS C / CCMT 2–CCMT 42 / CTR • ETS6 / CCMT 0 / CCMT 1 Li-valve tse ling: • Lebelo la 10 - 300 pps • Mokhoa oa ho khanna mohato o felletseng - 1/32 microstep • Max. tlhōrō ea boemo ba hona joale: 1 A • Matla a tsoang: 10 W tlhōrō, 5 W karolelano |
| Backup ea betri | V betri: 18 - 24 V DC(1), max. matla 11 W, min. matla a 0.1 Wh |
Motlakase oa Aux
| Mofuta | Sebopeho | Lintlha |
| + 5 V | +5 V DC | Phepelo ea kutlo: 5 V DC / 80 mA |
| + 15 V | +15 V DC | Phepelo ea kutlo: 15 V DC / 120 mA |
Lintlha tsa tšebetso
| Lintlha tsa tšebetso | Boleng |
| Pontšo | LCD 128 x 64 pixel (080G6016) |
| LED | Green, Orange, LED e khubelu e laoloang ke sesebelisoa sa software. |
| Khokahano ea ponts'o ea kantle | RJ12 |
| Khokahano ea data e hahelletsoeng | MODBUS, BACnet bakeng sa fieldbus le puisano le litsamaiso tsa BMS. SMNP bakeng sa puisano le litsamaiso tsa BMS. HTTP(S), MQTT(S) bakeng sa puisano ho web libatli le leru. |
| Ho nepahala ha tshupanako | +/- 15 ppm @ 25 °C, 60 ppm @ (-20 ho +85 °C) |
| Tšireletso ea matla a betri ea oache | Matsatsi a 3 @ 25 °C |
| USB-C | USB Version 1.1/2.0 lebelo le phahameng, DRP le tšehetso ea DRD. Max. ya jwale 150 mA Bakeng sa kgokelo ho pene drive le laptop (sheba User Guide). |
| Ho phahamisa | Seporo sa DIN, boemo bo otlolohileng |
| Ntlo ea polasetiki | Ho tima V0 le teko ea terata e benyang/e chesang ho 960 °C. Teko ea bolo: 125 °C Ho lutla hona joale: ≥ 250 V ho latela IEC 60112 |
| Mofuta oa taolo | E tla kopanngoa ho lisebelisoa tsa Sehlopha sa I le / kapa II |
| Mofuta wa ketso | 1C; 1Y bakeng sa mofuta o nang le SSR |
| Nako ea khatello ea motlakase ho pholletsa le insulating | Nako e telele |
| Tšilafalo | E loketse ho sebelisoa libakeng tse nang le tekanyo ea tšilafalo 2 |
| Immunity khahlano le voltagho phahama | Sehlopha sa II |
| Software sehlopha le sebopeho | sehlopha A |
Boemo ba tikoloho
| Boemo ba tikoloho | Boleng |
| Mocheso o fapaneng oa tikoloho, o sebetsa [°C] | -40 ho ea ho +70 °C bakeng sa mefuta ea Lite, Mid, Pro. -40 ho ea ho +70 °C bakeng sa liphetolelo tsa Mid +, Pro + ntle le katoloso ea I/O e kenyellelitsoeng. -40 ho +65 °C ho seng joalo. |
| Boemo ba mocheso oa tikoloho, lipalangoang [°C] | -40 ho ea ho +80 °C |
| Kakaretso ea boemo ba IP | IP20 IP40 ka pele ha poleiti kapa pontšo e kentsoe |
| Mongobo o amanang [%] | 5 - 90%, e sa fokotseng |
| Max. bophahamo ba ho kenya | 2000 m |
Lerata la motlakase
Lithapo tsa li-sensor, molumo o tlasetagLisebelisoa tsa DI le puisano ea data li tlameha ho bolokoa li arohane le likhoele tse ling tsa motlakase:
- Sebelisa literei tsa cable tse arohaneng
- Boloka sebaka se pakeng tsa likhoele bonyane 10 cm
- Boloka lithapo tsa I/O li le khutšoane kamoo ho ka khonehang
Mehopolo ea ho kenya
- Molaoli o lokela ho kenngoa feela, ho sebeletsoa le ho hlahlojoa ke basebetsi ba nang le tsebo le ho latela melao ea naha le ea lehae.
- Pele o sebeletsa lisebelisoa, molaoli o tlameha ho khaoloa ho tsoa ho lithapo tsa motlakase ka ho tsamaisa sesebelisoa se seholo sa sistimi ho OMA.
- Ho sebelisa matla a phepelotage ntle le e boletsoeng e ka senya sistimi haholo.
- Polokeho eohle e eketsehileng low lowtaglikhokahano tsa e (lisebelisoa tsa analogue le tsa dijithale, liphetho tsa analogue, likhokahano tsa serial libese, phepelo ea motlakase) li tlameha ho ba le litšupiso tse nepahetseng tse tsoang mecheng ea motlakase.
- Qoba ho ama kapa ho batla ho ama likarolo tsa elektronike tse kentsoeng libotong ho qoba ho tsoa ha electrostatic ho tloha ho opareitara ho ea ho likarolo, tse ka bakang tšenyo e kholo.
- U se ke ua hatella screwdriver holim'a li-connectors ka matla a feteletseng, ho qoba ho senya molaoli.
- E le ho etsa bonnete ba hore ho na le pholiso e lekaneng ea convection, re khothalletsa hore re se ke ra sitisa moea o bulehileng.
- Tšenyo ea tsietsi, ho se kenngoe hantle, kapa maemo a sebaka sa marang-rang a ka baka ho se sebetse hantle ha sistimi ea taolo, 'me qetellong a baka ho senyeha ha semela.
- Tšireletso e 'ngoe le e 'ngoe e ka khonehang e kenyelelitsoe lihlahisoa tsa rona ho thibela sena. Leha ho le joalo, kemiso e fosahetseng e ntse e ka hlahisa mathata. Litaolo tsa elektroniki ha li nke sebaka sa tloaelo e ntle ea boenjiniere.
- Nakong ea ho kenya, etsa bonnete ba hore ho etsoa mokhoa o nepahetseng oa ho thibela terata hore e theohe le ho baka kotsi e ka bang teng mabapi le ho makala kapa mollo.
- Danfoss e ke ke ea ikarabella bakeng sa thepa leha e le efe, kapa likarolo tsa semela, tse senyehileng ka lebaka la liphoso tse ka holimo. Ke boikarabello ba motho ea kenyang letsoho ho hlahloba ho kenya ka botlalo le ho lumellana le lisebelisoa tse hlokahalang tsa tšireletso.
- Moemeli oa sebakeng sa heno oa Danfoss o tla thabela ho u thusa ka likeletso tse ling.
Litifikeiti, liphatlalatso, le litumello (tse ntseng li tsoela pele)
| Tšoaea(4) | Naha |
| CE | EU |
| culus (bakeng sa AS-PS20 feela) | NAM (US le Canada) |
| cuRus | NAM (US le Canada) |
| Katoloso ea RCM | Australia / New Zealand |
| EAC | Armenia, Kyrgyzstan, Kazakhstan |
| UA | Ukraine |
Lenane le na le litumello tse ka sehloohong tse ka khonehang bakeng sa mofuta ona oa sehlahisoa. Nomoro ea khoutu ea motho ka mong e kanna ea ba le tse ling kapa litumello tsena kaofela, 'me litumello tse ling tsa lehae li kanna tsa se hlahe lenaneng.
Litumello tse ling li ntse li tsoela pele ha tse ling li ka fetoha ha nako e ntse e ea. U ka sheba boemo ba hajoale ho lihokelo tse bontšitsoeng ka tlase.
Phatlalatso ea EU ea ho lumellana e ka fumanoa ho khoutu ea QR.
Lintlha tse mabapi le tšebeliso ea lihatsetsi tse tukang le tse ling li ka fumanoa Phatlalatsong ea Moetsi ho khoutu ea QR.
Lintlha tse mabapi le tšebeliso ea lihatsetsi tse tukang le tse ling li ka fumanoa ho Manufacturer Declaration ka khoutu ea QR.
DanfossA/S
Tharollo ea Boemo ba Leholimo • danfoss.com • +45 7488 2222
Tlhahisoleseding efe kapa efe, ho kenyeletswa, empa e sa felle feela ho tlhahisoleseding e mabapi le kgetho ya sehlahiswa, tshebediso ya sona kapa tshebediso ya sona, moralo wa sehlahiswa, boima, boholo, bokgoni kapa datha efe kapa efe ya tekheniki e dipukung tsa sehlahiswa, ditlhaloso tsa manane a dikhatiso, dipapatso, jj le hore na di fumaneha ka mongolo. , ka molomo, ka mokhoa oa elektronike, mohaleng kapa ka ho khoasolla, e tla nkoa e le tsebo, 'me e tlama feela haeba, ho isa bohōleng boo, ho etsoa litšupiso tse hlakileng khotheishene kapa netefatso ea taelo. Danfoss e ke ke ea amohela boikarabello bofe kapa bofe bakeng sa liphoso tse ka bang teng libukeng, libukana, livideo le lintho tse ling. Danfoss e na le tokelo ea ho fetola lihlahisoa tsa eona ntle le tsebiso. Sena se sebetsa le ho lihlahisoa tse laetsoeng empa ha ho joalo
fetisoa ha feela liphetoho tse joalo li ka etsoa ntle le liphetoho sebopeho, sona kapa tšebetso ea sehlahisoa.
Matšoao 'ohle a thepa ena ke thepa ea lik'hamphani tsa Danfoss A/5 kapa tsa Danfoss. Danfoss le logo ea Danfoss ke matšoao a khoebo a Danfoss A/5. Litokelo tsohle li sirelelitsoe.
LBH
P: Nka fihlella joang web Qeto ea pele ea AS-CX06?
A: Kenya aterese ea IP ho seo u se ratang web sebatli. Litlhaloso tsa kamehla ke: Mosebelisi ea Ikemetseng: Mookameli, Phasewete ea kamehla: Mookameli, Phasewete ea kamehla ea Nomoro: 12345 (bakeng sa skrini sa LCD).
Q: ke eng boholo ba terata bolelele tshehetswang ke RS485 le CAN FD dikgokelo?
A: Mahokelo a RS485 le CAN FD a tšehetsa bolelele ba terata ho fihla ho 1000m.
P: Na molaoli oa AS-CX06 a ka hokeloa ho balaoli ba bangata ba AS-CX kapa lisebelisoa tsa kantle?
A: E, molaoli oa AS-CX06 o tšehetsa likhokahano ho balaoli ba bangata ba AS-CX, li-sensor tsa kantle, litsamaiso tsa fieldbus, le tse ling.
Litokomane / Lisebelisoa
 |
Danfoss AS-CX06 Selaoli se ka khonehang [pdf] Tlhophiso Tataiso AS-CX06 Lite, AS-CX06 Mid, AS-CX06 Mid, AS-CX06 Pro, AS-CX06 Pro, AS-CX06 Programmable Controller, AS-CX06, Programmable Controller, Controller |