CIMC Firmware Version 4.3(5.250030) M6
Update Patch for Secure Network Analytics v7.5.3

I-CIMC yeFirmware ye-M6 iPatch yoHlaziyo ye-Security Network Analytics

This document provides a description of the CIMC 4.3(5.250030) Firmware M6 Common Update Patch for Secure Network Analytics along with instructions for installing the patch.
This firmware update can be performed using either the SWU file/inkqubo okanye i-ISO file/inkqubo echazwe ngezantsi:

• The SWU file, i-patch-common-SNA-FIRMWARE-20250403-v2-01.swu, ihlaziya i-firmware ye-CIMC kwinguqulo 4.3 (5.250030) ye-UCS C-Series M6 hardware eqhuba i-Secure Network Analytics v7.5.3.
• Alternatively, you can also use the ISO file, i-patch-common-SNA-FIRMWARE20250403-M6-REL.iso, ukuhlaziya i-firmware ye-CIMC kwinguqulo 4.3 (5.250030) ye-UCS C-Series M6 hardware kunye ne-Secure Network Analytics v7.5.3.

Njengenxalenye yenkqubo yohlaziyo, qiniseka ukuba ufaka iipetshi eziyimfuneko kwisixhobo sakho sombane.

M6 Hardware
Le patch isebenza kwi-UCS C-Series M6 hardware ye-Secure Network Analytics izixhobo eziboniswe kolu luhlu lulandelayo.

M6 Hardware

Umphathi 2300	Uluvo lokuHamba 1300
Idatha ye-6300	Uluvo lokuHamba 3300
Flow Collector 4300	Uluvo lokuHamba 4300

Qinisekisa ukuba uyazihlaziya zonke izixhobo zombane.

Iinkcukacha ezongezelelweyo
For more details about CIMC version 4.3(5.250030), refer to Release Notes for Cisco UCS Rack Server Software.

Ukukhuphela kunye noFakelo

Unako ukukhuphela kwaye ufake i-CIMC 4.3(5.250030) iFirmware M6 iPatch yoHlaziyo oluQhelekileyo ngayo nayiphi na kwezi ndlela zilandelayo:

• Ukukhuphela kunye nokuFaka nge-SWU
• Ukukhuphela kunye nokuFaka nge-ISO

Ukukhuphela kunye nokuFaka nge-SWU
Khuphela
Ukukhuphela iqhosha lohlaziyo oluqhelekileyo file, gqibezela la manyathelo alandelayo:

1. Ngena kwiCisco Software Central, https://software.cisco.com.
2. Kwindawo yokuKhuphela kunye noPhuculo, khetha Fikelela ukhuphelo.
3. Chwetheza uHlalutyi oluKhuselekileyo lweNethiwekhi kwi-Khetha ibhokisi yokukhangela iMveliso.
4. Khetha imodeli yesixhobo kuluhlu oluhlayo, emva koko ucinezele u-Enter.
5. Under Select a Software Type, choose Secure Network Analytics Patches, then choose Firmware > Firmware in the All Release area to locate the patch.
6. Khuphela kwaye ugcine i file, patch-common-SNA-FIRMWARE-20250403-v201.swu.

Ukuhlohla
Ukufakela uhlaziyo lwesiziba sohlaziyo oluqhelekileyo file, gqibezela la manyathelo alandelayo:

1. Ngena kuMphathi.
2. On the Network Analytics page, choose Configure > Global > Central Management.
3. Cofa uMphathi woHlaziyo.
4. On the Update Manager page, click Upload, and then open the saved file, patchcommon-SNA-FIRMWARE-20250403-v2-01.swu.
5. Cofa imenyu yeZenzo kwisixhobo, emva koko ucofe u-Fakela uHlaziyo.
   The patch stops the Vertica Database, then restarts the appliance.
6. Make sure you restart Vertica on any Data Node after the update patch file ihlohla ngempumelelo kuzo zonke iiNode zeDatha.

a. Log in to the Manager.
b. Go to Central Management > Data Store > Database Control.
c. Under the Database Control tab, click the (Ellipsis) icon in the Actions column for the database.
d. Khetha Qala.
e. Qinisekisa imo yedatabase iboniswe njengeQhagamshelwe. Inkqubo yokufakela inokuthatha ukuya kwimizuzu engama-90; isixhobo siqalisa kwakhona ngokuzenzekelayo.

Ukukhuphela kunye nokuFaka nge-ISO
Khuphela
Ukukhuphela isiqwenga sohlaziyo file, gqibezela la manyathelo alandelayo:

1. Ngena kwiCisco Software Central, https://software.cisco.com.
2. Kwindawo yokuKhuphela kunye noPhuculo, khetha Fikelela ukhuphelo.
3. Chwetheza uHlalutyi oluKhuselekileyo lweNethiwekhi kwi-Khetha ibhokisi yokukhangela iMveliso.
4. Khetha imodeli yesixhobo kuluhlu oluhlayo, emva koko ucinezele u-Enter.
5. From the left menu, choose All Release > 4.3 > 4.3(5.250030).
6. Khuphela kwaye ugcine i file, patch-common-SNA-FIRMWARE-20250403-M6REL.iso.
7. There are two ways of installing ISO:

o Installation Using vKVM-Mapped vDVD
o Installation Using CIMC-Mapped vDVD

Phambi koFakelo
Ukuba unemithetho ye-firewall enikwe amandla kwi-Cisco Integrated Management Controller (CIMC), khankanya i-169.254.254.2 kuluhlu lweenginginya ezivumelekileyo ukuqinisekisa ukuba uhlaziyo luphumelele. Kungenjalo ungatsiba eli nyathelo kwaye uye kuFakelo usebenzisa i-vKVM-Mapped vDVD okanye uFakelo usebenzisa iCIMC-Mapped vDVD, kuxhomekeke kwindlela yokufakela oyikhethayo.

1. Log in to the unit’s Cisco Integrated Management Controller (CIMC) interface using a web umkhangeli zincwadi.
2. Choose Networking > Network Security.
3. In the IP Filtering (Allow Listing) menu, enter 169.254.254.2 IP value in the IP filter field.
4. Cofa Gcina Iinguqu.

Ukufakela Ukusebenzisa i-vKVM-Mapped vDVD
Le ndlela yokuhlohla ihlaziya i-firmware ngokufikelela kwi-ISO yohlaziyo lwe-firmware file igcinwe kumatshini osetyenziselwa ukuqhagamshela kwi-CIMC UI.
To install the firmware patch from an ISO image, use the vKVM console of an M6 machine.

1. Log in to the unit’s Cisco Integrated Management Controller (CIMC) interface using a web umkhangeli zincwadi.
2. Select Launch KVM on the toolbar, if prompted, select HTML based KVM.
3. The Virtual Console opens in a new browser tab.
4. From the vKVM console, select Virtual Media to check for existing mappings. If any mappings exist (either vKVM-Mapped or CIMC-Mapped), eject them.
   Bona i-example ngezantsi ukwenzela imephu endala yokukhupha.Umfanekiso olandelayo ubonisa isikrini xa kungekho mappings iqwalaselweyo.
5. From the vKVM console, select Virtual Media > vKVM-Mapped vDVD from the menu on the left side of the window to open the Map Virtual Media – CD/DVD dialog.
6. In the Map Virtual Media – CD/DVD dialog box, browse to the locally stored SNA M6 appliance firmware ISO file, yikhethe, kwaye ucofe iMaphu Qhuba ukwenza imephu ye-ISO yasekuhlaleni kwisixhobo sombane se-SNA M6 drive.
7. From the vKVM console, click Virtual Media from the menu on the left side of the window to verify that the ISO is mapped.
8. Select Macros > Static Macros > CTRL-ALT-DEL to initiate the reboot process.
9. Press the F6 key on your keyboard when the Cisco logo and boot messages appear in the vKVM console.
10. When the Please select boot device: dialog box appears, select Cisco vKVMMapped vDVD2.00.The firmware update initiates. The CIMC may reboot during the update process, causing a temporary loss of connection. If this occurs, log in to the CIMC again and re-launch the vKVM Console to continue monitoring the update. Once the firmware update is complete, the ISO will be ejected or unmounted, and the SNA appliance will reboot.
11. Verify on the CIMC Chassis Summary page that the firmware has been updated.

Ukufakela Ukusebenzisa i-CIMC-Mapped vDVD
Le ndlela yokuhlohla ihlaziya i-firmware ngokufikelela kwi-ISO yohlaziyo lwe-firmware file igcinwe kumncedisi we-HTTP/S ofumanekayo kwi-CIMC.
To install the firmware patch from an ISO image, use the vKVM console on the M6 machine.

1. Log in to the unit’s Cisco Integrated Management Controller (CIMC) interface using a web umkhangeli zincwadi.
2. Select Launch KVM on the toolbar, if prompted, select HTML based KVM.Ithebhu entsha yesikhangeli ivula ikhonsoli ye-KVM enenyani, ibonisa uluhlu lwezinto zemenyu kwicala lasekhohlo lefestile.
3. From the vKVM console, select Virtual Media to check for existing mappings. If any mappings exist (either vKVM-Mapped or CIMC-Mapped), eject them.
   Bona i-example ngezantsi ukwenzela imephu endala yokukhupha.Umfanekiso olandelayo ubonisa isikrini xa kungekho mappings iqwalaselweyo.
4. From the vKVM console, select Virtual Media > CIMC-Mapped vDVD from the menu on the left side of the window to open the Map Virtual Media – CD/DVD dialog.
5. In the Map Virtual Media – CD/DVD dialog box, complete the following steps:
   a. In the Name field, enter a descriptive name (for example, Firmware_ 2025).
   b. Kwi File Indawo yendawo, ngenisa umendo we-ISO file.
   c. If required, enter the Username and Password.
   d. Click Map Drive.
6. From the vKVM console, click Virtual Media to verify that the mapping is in effect.
7. From the vKVM console, select Macros > Static Macros > Ctrl-Alt-Del to initiate the reboot process.
8. Press the F6 key on your keyboard when the Cisco logo and boot messages appear in the vKVM console.
9. When the Please select boot device: dialog box appears, select Cisco CIMC-Mapped vDVD2.00.The firmware update initiates. The CIMC may reboot during the update process, after which the firmware update will continue. A CIMC reboot will cause a temporary loss of connection. Log in to the CIMC again and relaunch the vKVM Console to monitor
   the update progress.
   After the firmware update is complete, the ISO will not be automatically unmapped. Be sure to manually unmap the ISO before performing another reboot.
10. In the vKVM console, after you see the message All files ikopishwe kwaye iqinisekisiwe, i-ISO ilayishiwe kwaye uhlaziyo lwe-firmware luqala. Kweli nqanaba, kukhuselekile ukukhupha okanye ukungamaphu i-ISO ye-firmware ebhalwe ngaphambili.
11. From the vKVM console, select Virtual Media and click the name of the previously configured mapping to eject or unmap it.
12. Click Confirm to unmap the ISO file.The firmware update continues, and the next reboot will start the SNA M6 appliance.
13. On the CIMC Chassis Summary page, verify that the firmware has been updated to the expected version.

Ukuqhagamshelana neNkxaso
Ukuba ufuna inkxaso yobugcisa, nceda wenze enye yezi zilandelayo:

• Qhagamshelana neCisco Partner yakho yasekhaya
• Qhagamshelana Cisco Inkxaso
  o To open a case by web: http://www.cisco.com/c/en/us/support/index.html
  o For phone support: 1-800-553-2447 (US)
  o For worldwide support numbers: www.cisco.com/en/US/partner/support/tsd_cisco_worldwide_contacts.html

Ulwazi lwelungelo lokushicilela

I-Cisco kunye ne-logo yeCisco ziimpawu zorhwebo okanye iimpawu zorhwebo ezibhalisiweyo zeCisco kunye/okanye namahlakani ayo e-US nakwamanye amazwe. Ukuya view uluhlu lweempawu zorhwebo zeCisco, yiya kule URL: https://www.cisco.com/go/trademarks. Iimpawu zokuthengisa zomntu wesithathu ezikhankanyiweyo ziyipropathi yabanini bazo. Ukusetyenziswa kwegama elithi iqabane akuthethi ukuba ubudlelwane phakathi kweCisco kunye nayo nayiphi na enye inkampani. (1721R)

© 2025 Cisco Systems, Inc. kunye/okanye namahlakani ayo.
Onke Amalungelo Agciniwe.

Amaxwebhu / Izibonelelo

I-CISCO CIMC Firmware ye-M6 iPatch yoHlaziyo lwe-Security Network Analytics [pdf] Isikhokelo somsebenzisi I-CIMC yeFirmware ye-M6 iPatch yoHlaziyo yoHlaziyo lweNethiwekhi eKhuselekileyo, iPatch yoHlaziyo ye-M6 yoHlaziyo oluKhuselekileyo lweNethiwekhi, iPatch yoHlaziyo yoHlaziyo oluKhuselekileyo lweNethiwekhi, iPatch yoHlaziyo oluKhuselekileyo lweNethiwekhi, uHlaziyo oluKhuselekileyo lweNethiwekhi.

Iimbekiselo

• Incwadi yokusebenzisa