CIMC Firmware Version 4.3(5.250030) M6
Update Patch for Secure Network Analytics v7.5.3
CIMC Firmware M6 Fa'afouga Patch mo Su'esu'ega Fa'amaumauga Saogalemu
This document provides a description of the CIMC 4.3(5.250030) Firmware M6 Common Update Patch for Secure Network Analytics along with instructions for installing the patch.
This firmware update can be performed using either the SWU file/procedure poʻo le ISO file/ fa'asologa o lo'o otooto atu i lalo:
- The SWU file, patch-common-SNA-FIRMWARE-20250403-v2-01.swu, faʻafouina le CIMC firmware i le version 4.3 (5.250030) mo UCS C-Series M6 meafaigaluega faʻaogaina Secure Network Analytics v7.5.3.
- Alternatively, you can also use the ISO file, patch-common-SNA-FIRMWARE20250403-M6-REL.iso, e faʻafou ai le CIMC firmware i le version 4.3(5.250030) mo UCS C-Series M6 hardware ma Secure Network Analytics v7.5.3.
I le avea ai o se vaega o le fa'afouga, ia mautinoa e fa'apipi'i le fa'apipi'iina o lo'o mana'omia i luga o au masini.
M6 Meafaigaluega
O lenei patch e faʻaoga i meafaigaluega a le UCS C-Series M6 mo le Secure Network Analytics appliances o loʻo faʻaalia i le laulau o loʻo i lalo.
M6 Meafaigaluega
| Pule 2300 | Su'esu'e tafe 1300 |
| Node Fa'amatalaga 6300 | Su'esu'e tafe 3300 |
| Aoina mai le tafe 4300 | Su'esu'e tafe 4300 |
Ia mautinoa e te fa'afouina mea faigaluega fa'aletino uma.
Fa'amatalaga Faaopoopo
For more details about CIMC version 4.3(5.250030), refer to Release Notes for Cisco UCS Rack Server Software.
Download ma Fa'apipi'i
E mafai ona e siiina ma faʻapipiʻi le CIMC 4.3(5.250030) Firmware M6 Common Update Patch e ala i se tasi o auala nei:
- La'uina ma fa'apipi'i ile SWU
- La'uina ma fa'apipi'i ile ISO
La'uina ma fa'apipi'i ile SWU
La'u mai
Ina ia sii maia le patch update masani file, fa'auma laasaga nei:
- Ulufale i Cisco Software Central, https://software.cisco.com.
- I le vaega o le Download and Upgrade, filifili Avanoa downloads.
- Fa'aigoa Secure Network Analytics i le Pusa Su'esu'e o Mea.
- Filifili le faʻataʻitaʻiga meafaigaluega mai le lisi pa'ū i lalo, ona oomi lea o le Enter.
- Under Select a Software Type, choose Secure Network Analytics Patches, then choose Firmware > Firmware in the All Release area to locate the patch.
- La'u mai ma teu le file, patch-common-SNA-FIRMWARE-20250403-v201.swu.
Fa'apipi'i
Ina ia faʻapipiʻi le faʻafouga masani o patch update file, fa'auma laasaga nei:
- Ulufale i le Pule.
- On the Network Analytics page, choose Configure > Global > Central Management.
- Kiliki Update Manager.
- On the Update Manager page, click Upload, and then open the saved file, patchcommon-SNA-FIRMWARE-20250403-v2-01.swu.
- Kiliki le lisi o Actions mo le masini, ona kiliki lea Fa'afou Fa'afou.
The patch stops the Vertica Database, then restarts the appliance. - Make sure you restart Vertica on any Data Node after the update patch file fa'apipi'i manuia i Nodes uma o Fa'amaumauga.
a. Log in to the Manager.
b. Go to Central Management > Data Store > Database Control.
c. Under the Database Control tab, click the (Ellipsis) icon in the Actions column for the database.
o. Filifili Amata.
u. Faʻamaonia le tulaga faʻamaumauga o loʻo faʻaalia e pei o Fesoʻotaʻi. O le faʻatulagaga faʻapipiʻi e mafai ona oʻo atu ile 90 minute; e otometi lava ona toe amata le masini.
La'uina ma fa'apipi'i ile ISO
La'u mai
Ina ia sii maia le patch update file, fa'auma laasaga nei:
- Ulufale i Cisco Software Central, https://software.cisco.com.
- I le vaega o le Download and Upgrade, filifili Avanoa downloads.
- Fa'aigoa Secure Network Analytics i le Pusa Su'esu'e o Mea.
- Filifili le faʻataʻitaʻiga meafaigaluega mai le lisi pa'ū i lalo, ona oomi lea o le Enter.
- From the left menu, choose All Release > 4.3 > 4.3(5.250030).
- La'u mai ma teu le file, patch-common-SNA-FIRMWARE-20250403-M6REL.iso.
- There are two ways of installing ISO:
o Installation Using vKVM-Mapped vDVD
o Installation Using CIMC-Mapped vDVD
Aʻo leʻi faʻapipiʻiina
Afai e iai sau faʻatonuga faʻamalama e mafai ona faʻatagaina Cisco Integrated Management Controller (CIMC), faʻamaonia le 169.254.254.2 i le lisi o tagata faʻatagaina e faʻamautinoa e manuia le faʻafouga. A leai e mafai ona e fa'ase'e le la'asaga lea ma alu i le Fa'apipi'i Fa'aaogā le vKVM-Mapped vDVD po'o le Fa'apipi'i Fa'aaogā le CIMC-Mapped vDVD, e fa'atatau i lau auala fa'apipi'i e te mana'o ai.
- Log in to the unit’s Cisco Integrated Management Controller (CIMC) interface using a web su'esu'e.
- Choose Networking > Network Security.
- In the IP Filtering (Allow Listing) menu, enter 169.254.254.2 IP value in the IP filter field.
- Kiliki Save Suiga.
Fa'apipi'i Fa'aaogā le vKVM-Mapped vDVD
O lenei metotia faʻapipiʻi faʻafouina le firmware e ala i le mauaina o le firmware update ISO file teuina i luga o le masini faʻaoga e faʻafesoʻotaʻi i le CIMC UI.
To install the firmware patch from an ISO image, use the vKVM console of an M6 machine.
- Log in to the unit’s Cisco Integrated Management Controller (CIMC) interface using a web su'esu'e.
- Select Launch KVM on the toolbar, if prompted, select HTML based KVM.
- The Virtual Console opens in a new browser tab.
- From the vKVM console, select Virtual Media to check for existing mappings. If any mappings exist (either vKVM-Mapped or CIMC-Mapped), eject them.
Va'ai le example i lalo mo se faafanua tuai e aveese.
O le ata e sosoo ai o loʻo faʻaalia ai le lau pe a leai ni faʻafanua e faʻatulagaina.
- From the vKVM console, select Virtual Media > vKVM-Mapped vDVD from the menu on the left side of the window to open the Map Virtual Media – CD/DVD dialog.
- In the Map Virtual Media – CD/DVD dialog box, browse to the locally stored SNA M6 appliance firmware ISO file, filifili, ma kiliki le Map Drive e fa'afanua le ISO fa'apitonu'u i le SNA M6 appliance virtual drive.
- From the vKVM console, click Virtual Media from the menu on the left side of the window to verify that the ISO is mapped.
- Select Macros > Static Macros > CTRL-ALT-DEL to initiate the reboot process.
- Press the F6 key on your keyboard when the Cisco logo and boot messages appear in the vKVM console.
- When the Please select boot device: dialog box appears, select Cisco vKVMMapped vDVD2.00.
The firmware update initiates. The CIMC may reboot during the update process, causing a temporary loss of connection. If this occurs, log in to the CIMC again and re-launch the vKVM Console to continue monitoring the update. Once the firmware update is complete, the ISO will be ejected or unmounted, and the SNA appliance will reboot. - Verify on the CIMC Chassis Summary page that the firmware has been updated.
Fa'apipi'i Fa'aaogā le vDVD fa'afanua CIMC
O lenei metotia faʻapipiʻi faʻafouina le firmware e ala i le mauaina o le firmware update ISO file teuina i luga o se HTTP / S server e mafai ona maua mai le CIMC.
To install the firmware patch from an ISO image, use the vKVM console on the M6 machine.
- Log in to the unit’s Cisco Integrated Management Controller (CIMC) interface using a web su'esu'e.
- Select Launch KVM on the toolbar, if prompted, select HTML based KVM.
O lo'o tatalaina se laupepa fou mo le fa'amafanafanaga KVM, fa'aalia se lisi o mea fa'aitu i le itu agavale o le fa'amalama.
- From the vKVM console, select Virtual Media to check for existing mappings. If any mappings exist (either vKVM-Mapped or CIMC-Mapped), eject them.
Va'ai le example i lalo mo se faafanua tuai e aveese.
O le ata e sosoo ai o loʻo faʻaalia ai le lau pe a leai ni faʻafanua e faʻatulagaina.
- From the vKVM console, select Virtual Media > CIMC-Mapped vDVD from the menu on the left side of the window to open the Map Virtual Media – CD/DVD dialog.
- In the Map Virtual Media – CD/DVD dialog box, complete the following steps:
a. In the Name field, enter a descriptive name (for example, Firmware_ 2025).
e. I le File Nofoaga fanua, ulufale i le ala i le ISO file.
c. If required, enter the Username and Password.
d. Click Map Drive. - From the vKVM console, click Virtual Media to verify that the mapping is in effect.
- From the vKVM console, select Macros > Static Macros > Ctrl-Alt-Del to initiate the reboot process.
- Press the F6 key on your keyboard when the Cisco logo and boot messages appear in the vKVM console.
- When the Please select boot device: dialog box appears, select Cisco CIMC-Mapped vDVD2.00.
The firmware update initiates. The CIMC may reboot during the update process, after which the firmware update will continue. A CIMC reboot will cause a temporary loss of connection. Log in to the CIMC again and relaunch the vKVM Console to monitor
the update progress.
After the firmware update is complete, the ISO will not be automatically unmapped. Be sure to manually unmap the ISO before performing another reboot. - In the vKVM console, after you see the message All files kopiina ma faʻamaonia, ua uma ona uta le ISO ma amata le faʻafouina o le firmware. I le taimi nei, e saogalemu le tu'u ese po'o le le fa'afanua o le firmware ISO ua uma ona fa'afanua.
- From the vKVM console, select Virtual Media and click the name of the previously configured mapping to eject or unmap it.
- Click Confirm to unmap the ISO file.
The firmware update continues, and the next reboot will start the SNA M6 appliance. - On the CIMC Chassis Summary page, verify that the firmware has been updated to the expected version.
Fa'afeso'ota'i le Lagolago
Afai e te manaʻomia se fesoasoani faʻapitoa, faʻamolemole fai se tasi o mea nei:
- Fa'afeso'ota'i lau Paaga Cisco i le lotoifale
- Fa'afeso'ota'i Cisco Lagolago
o To open a case by web: http://www.cisco.com/c/en/us/support/index.html
o For phone support: 1-800-553-2447 (US)
o For worldwide support numbers: www.cisco.com/en/US/partner/support/tsd_cisco_worldwide_contacts.html
Fa'amatalaga Puletaofia
Cisco ma le Cisco logo o fa'ailoga fa'ailoga po'o fa'ailoga fa'amaufa'ailoga a Cisco ma/po'o ona so'otaga i le US ma isi atunu'u. I view se lisi o faailoga tau Cisco, alu i lenei URL: https://www.cisco.com/go/trademarks. O fa'ailoga tau fefa'ataua'iga lona tolu o lo'o ta'ua o meatotino a latou lava tagata. O le faʻaaogaina o le upu paaga e le faʻaalia ai se mafutaga faʻapaʻaga i le va o Cisco ma soʻo se isi kamupani. (1721R)
© 2025 Cisco Systems, Inc. ma/po'o ana paaga.
Ua taofia aia tatau uma.
Pepa / Punaoa
 |
CISCO CIMC Firmware M6 Faʻafouina Patch mo Suʻesuʻega Faʻamatalaga Saogalemu [pdf] Taiala mo Tagata Fa'aoga CIMC Firmware M6 Faʻafouina Patch mo Suʻesuʻega Fesoʻotaiga Saogalemu, M6 Faʻafouina Patch mo Suʻesuʻega Fesoʻotaʻiga Saogalemu, Faʻafouina Patch mo Suʻesuʻega Faʻasaʻo Faʻasalalau, Patch mo Suʻesuʻega Faʻasaienisi, Suʻesuʻega Faʻamatalaga Saogalemu |