CIMC Firmware Version 4.3(5.250030) M6
Update Patch for Secure Network Analytics v7.5.3

CIMC Firmware M6 Update Patch bakeng sa Sireletsehile Network Analytics

This document provides a description of the CIMC 4.3(5.250030) Firmware M6 Common Update Patch for Secure Network Analytics along with instructions for installing the patch.
This firmware update can be performed using either the SWU file/mokhoa kapa ISO file/ mokhoa o hlalositsoeng ka tlase:

• The SWU file, patch-common-SNA-FIRMWARE-20250403-v2-01.swu, e ntlafatsa firmware ea CIMC ho version 4.3 (5.250030) bakeng sa lisebelisoa tsa UCS C-Series M6 tse sebelisang Secure Network Analytics v7.5.3.
• Alternatively, you can also use the ISO file, patch-common-SNA-FIRMWARE20250403-M6-REL.iso, ho ntlafatsa firmware ea CIMC ho version 4.3 (5.250030) bakeng sa lisebelisoa tsa UCS C-Series M6 tse nang le Secure Network Analytics v7.5.3.

E le karolo ea ts'ebetso ea ntlafatso, etsa bonnete ba hore u kenya lipache tse hlokahalang tsa rollup lisebelisoa tsa hau.

M6 Hardware
Patch ena e sebetsa ho hardware ea UCS C-Series M6 bakeng sa lisebelisoa tsa Secure Network Analytics tse bontšitsoeng tafoleng e latelang.

M6 Hardware

Motsamaisi 2300	Sensor ea Phallo 1300
Node ea data 6300	Sensor ea Phallo 3300
Phallo Collector 4300	Sensor ea Phallo 4300

Etsa bonnete ba hore u nchafatsa lisebelisoa tsohle tsa 'mele.

Tlhahisoleseling e 'Ngoe
For more details about CIMC version 4.3(5.250030), refer to Release Notes for Cisco UCS Rack Server Software.

Khoasolla le ho Kenya

U ka khoasolla le ho kenya CIMC 4.3(5.250030) Firmware M6 Common Update Patch ka e 'ngoe ea litsela tse latelang:

• Ho jarolla le ho kenya ka SWU
• Khoasolla le ho e kenya ka ISO

Ho jarolla le ho kenya ka SWU
Khoasolla
Ho jarolla patch e tloaelehileng ea ntlafatso file, tlatsa mehato e latelang:

1. Kena ho Cisco Software Central, https://software.cisco.com.
2. Sebakeng sa Khoasolla le ho Ntlafatsa, khetha Fumana tse jarollotsoeng.
3. Tlanya Secure Network Analytics lebokoseng la ho batla la Sehlahisoa.
4. Khetha mofuta oa sesebelisoa lethathamong le theoha, ebe o tobetsa Enter.
5. Under Select a Software Type, choose Secure Network Analytics Patches, then choose Firmware > Firmware in the All Release area to locate the patch.
6. Kopitsa le ho boloka faele ea file, patch-common-SNA-FIRMWARE-20250403-v201.swu.

Ho kenya
Ho kenya ntlafatso e tloaelehileng ea patch file, tlatsa mehato e latelang:

1. Kena ho Motsamaisi.
2. On the Network Analytics page, choose Configure > Global > Central Management.
3. Tobetsa Update Manager.
4. On the Update Manager page, click Upload, and then open the saved file, patchcommon-SNA-FIRMWARE-20250403-v2-01.swu.
5. Tobetsa menu ea Actions bakeng sa sesebelisoa, ebe o tobetsa Install Update.
   The patch stops the Vertica Database, then restarts the appliance.
6. Make sure you restart Vertica on any Data Node after the update patch file e kenya ka katleho ho Li-Node tsohle tsa Data.

a. Log in to the Manager.
b. Go to Central Management > Data Store > Database Control.
c. Under the Database Control tab, click the (Ellipsis) icon in the Actions column for the database.
d. Khetha Qala.
e. Netefatsa boemo ba polokelongtshedimosetso bo bontshwa e le Hoketswe. Ts'ebetso ea ho kenya e ka nka metsotso e 90; sesebelisoa se qala hape ka bohona.

Khoasolla le ho e kenya ka ISO
Khoasolla
Ho jarolla patch ea ntlafatso file, tlatsa mehato e latelang:

1. Kena ho Cisco Software Central, https://software.cisco.com.
2. Sebakeng sa Khoasolla le ho Ntlafatsa, khetha Fumana tse jarollotsoeng.
3. Tlanya Secure Network Analytics lebokoseng la ho batla la Sehlahisoa.
4. Khetha mofuta oa sesebelisoa lethathamong le theoha, ebe o tobetsa Enter.
5. From the left menu, choose All Release > 4.3 > 4.3(5.250030).
6. Kopitsa le ho boloka faele ea file, patch-common-SNA-FIRMWARE-20250403-M6REL.iso.
7. There are two ways of installing ISO:

o Installation Using vKVM-Mapped vDVD
o Installation Using CIMC-Mapped vDVD

Pele ho Tlhophiso
Haeba u na le melao ea firewall e nolofalitsoeng bakeng sa Cisco Integrated Management Controller (CIMC), bolela 169.254.254.2 lethathamong la mabotho a lumelletsoeng ho netefatsa hore ntlafatso e atlehile. Ho seng joalo u ka tlola mohato ona 'me u ee ho Instolation U sebelisa vKVM-Mapped vDVD kapa Installation U sebelisa CIMC-Mapped vDVD, ho latela mokhoa oo u o ratang oa ho instola.

1. Log in to the unit’s Cisco Integrated Management Controller (CIMC) interface using a web sebatli.
2. Choose Networking > Network Security.
3. In the IP Filtering (Allow Listing) menu, enter 169.254.254.2 IP value in the IP filter field.
4. Tobetsa Boloka Liphetoho.

Ho kenya Ho sebelisa vKVM-Mapped vDVD
Mokhoa ona oa ho kenya o nchafatsa firmware ka ho fihlella ntlafatso ea firmware ea ISO file bolokoa mochining o sebelisoang ho hokela CIMC UI.
To install the firmware patch from an ISO image, use the vKVM console of an M6 machine.

1. Log in to the unit’s Cisco Integrated Management Controller (CIMC) interface using a web sebatli.
2. Select Launch KVM on the toolbar, if prompted, select HTML based KVM.
3. The Virtual Console opens in a new browser tab.
4. From the vKVM console, select Virtual Media to check for existing mappings. If any mappings exist (either vKVM-Mapped or CIMC-Mapped), eject them.
   Bona example ka tlase bakeng sa 'mapa oa khale o ka ntšoang.Setšoantšo se latelang se bontša skrine ha ho se na limmapa tse lokiselitsoeng.
5. From the vKVM console, select Virtual Media > vKVM-Mapped vDVD from the menu on the left side of the window to open the Map Virtual Media – CD/DVD dialog.
6. In the Map Virtual Media – CD/DVD dialog box, browse to the locally stored SNA M6 appliance firmware ISO file, e khethe, 'me u tobetse 'Mapa Drive ho etsa 'mapa oa ISO oa lehae ho drive ea sebele ea sesebelisoa sa SNA M6.
7. From the vKVM console, click Virtual Media from the menu on the left side of the window to verify that the ISO is mapped.
8. Select Macros > Static Macros > CTRL-ALT-DEL to initiate the reboot process.
9. Press the F6 key on your keyboard when the Cisco logo and boot messages appear in the vKVM console.
10. When the Please select boot device: dialog box appears, select Cisco vKVMMapped vDVD2.00.The firmware update initiates. The CIMC may reboot during the update process, causing a temporary loss of connection. If this occurs, log in to the CIMC again and re-launch the vKVM Console to continue monitoring the update. Once the firmware update is complete, the ISO will be ejected or unmounted, and the SNA appliance will reboot.
11. Verify on the CIMC Chassis Summary page that the firmware has been updated.

Ho kenya ho Sebelisa CIMC-Mapped vDVD
Mokhoa ona oa ho kenya o nchafatsa firmware ka ho fihlella ntlafatso ea firmware ea ISO file e bolokiloe ho seva sa HTTP/S se fumanehang ho tsoa ho CIMC.
To install the firmware patch from an ISO image, use the vKVM console on the M6 machine.

1. Log in to the unit’s Cisco Integrated Management Controller (CIMC) interface using a web sebatli.
2. Select Launch KVM on the toolbar, if prompted, select HTML based KVM.Taba e ncha ea sebatli e buloa bakeng sa khomphutha ea KVM, e bonts'ang lethathamo la lintho tsa menyu ka lehlakoreng le letšehali la fensetere.
3. From the vKVM console, select Virtual Media to check for existing mappings. If any mappings exist (either vKVM-Mapped or CIMC-Mapped), eject them.
   Bona example ka tlase bakeng sa 'mapa oa khale o ka ntšoang.Setšoantšo se latelang se bontša skrine ha ho se na limmapa tse lokiselitsoeng.
4. From the vKVM console, select Virtual Media > CIMC-Mapped vDVD from the menu on the left side of the window to open the Map Virtual Media – CD/DVD dialog.
5. In the Map Virtual Media – CD/DVD dialog box, complete the following steps:
   a. In the Name field, enter a descriptive name (for example, Firmware_ 2025).
   b. Lenaneong la File Sebaka sa sebaka, kenya tsela e eang ho ISO file.
   c. If required, enter the Username and Password.
   d. Click Map Drive.
6. From the vKVM console, click Virtual Media to verify that the mapping is in effect.
7. From the vKVM console, select Macros > Static Macros > Ctrl-Alt-Del to initiate the reboot process.
8. Press the F6 key on your keyboard when the Cisco logo and boot messages appear in the vKVM console.
9. When the Please select boot device: dialog box appears, select Cisco CIMC-Mapped vDVD2.00.The firmware update initiates. The CIMC may reboot during the update process, after which the firmware update will continue. A CIMC reboot will cause a temporary loss of connection. Log in to the CIMC again and relaunch the vKVM Console to monitor
   the update progress.
   After the firmware update is complete, the ISO will not be automatically unmapped. Be sure to manually unmap the ISO before performing another reboot.
10. In the vKVM console, after you see the message All files kopitsoe le ho netefatsoa, ​​​​ISO e kentsoe 'me ntlafatso ea firmware ea qala. Mothating ona, ho bolokehile ho ntša kapa ho theola 'mapa oa firmware ea pele ea ISO.
11. From the vKVM console, select Virtual Media and click the name of the previously configured mapping to eject or unmap it.
12. Click Confirm to unmap the ISO file.The firmware update continues, and the next reboot will start the SNA M6 appliance.
13. On the CIMC Chassis Summary page, verify that the firmware has been updated to the expected version.

Ho ikopanya le Tšehetso
Haeba o hloka tšehetso ea tekheniki, ka kopo etsa e 'ngoe ea tse latelang:

• Ikopanye le Cisco Partner ea hau ea lehae
• Ikopanye le Cisco Support
  o To open a case by web: http://www.cisco.com/c/en/us/support/index.html
  o For phone support: 1-800-553-2447 (US)
  o For worldwide support numbers: www.cisco.com/en/US/partner/support/tsd_cisco_worldwide_contacts.html

Litaba tsa Copyright

Cisco le logo ea Cisco ke matšoao a khoebo kapa matšoao a ngolisitsoeng a Cisco le/kapa mafapha a eona a US le linaheng tse ling. Ho view lethathamo la matšoao a khoebo a Cisco, e ea ho sena URL: https://www.cisco.com/go/trademarks. Matshwao a kgwebo a motho wa boraro a boletsweng ke thepa ya beng ba ona. Tšebeliso ea lentsoe molekane ha e bolele kamano ea tšebelisano pakeng tsa Cisco le k'hamphani efe kapa efe. (1721R)

© 2025 Cisco Systems, Inc. le/kapa mekhatlo e amanang le eona.
Litokelo tsohle li sirelelitsoe.

Litokomane / Lisebelisoa

CISCO CIMC Firmware M6 Update Patch bakeng sa Sireletsehile Network Analytics [pdf] Bukana ea Mosebelisi CIMC Firmware M6 Update Patch bakeng sa Sireletsehile Network Analytics, M6 Update Patch bakeng sa Sireletsehile Network Analytics, Update Patch bakeng sa Sireletsehile Network Analytics, Patch bakeng sa Secure Network Analytics, Sireletsehile Network Analytics

Litšupiso

• Bukana ea Mosebelisi