Buka ea Ts'ebetso
crm + Ultrasonic Sensors e nang le liphetho tse peli tse fetohang
crm+25/DD/TC/E
crm+35/DD/TC/E
crm+130/DD/TC/E
crm+340/DD/TC/E
crm+600/DD/TC/E
Tlhaloso ea Sehlahisoa
- Sensor ea crm+ e nang le liphetho tse peli tsa switching e lekanya sebaka sa ntho e ka har'a sebaka sa ho lemoha ntle le ho kopana. Ho ipapisitse le sebaka sa ho lemoha se fetotsoeng, tlhahiso ea switching e setiloe.
- The ultrasonic transducer surface ea crm + sensors e laminated ka filimi ea PEEK. Transducer ka boeona e tiisitsoe khahlanong le ntlo ka lesale la kopanelo la PTFE. Sebopeho sena se tiisa khanyetso e phahameng khahlanong le lintho tse ngata tse mabifi.
- Litlhophiso tsohle li etsoa ka li-pushbutton tse peli le pontšo ea LED ea linomoro tse tharo (TouchControl).
- Li-LED tsa mebala e meraro li bontša boemo ba ho fetoha.
- Mesebetsi ea tlhahiso ea fetoha ho tloha ho NOC ho ea ho NCC.
- Li-sensor li ka fetoloa ka letsoho ka TouchControl kapa ka mokhoa oa ho ruta.
- Mesebetsi e meng e molemo e setilwe ho Add-on-menu.
- Ho sebelisa adaptara ea LinkControl (sesebedisoa sa boikhethelo) tsohle tsa TouchControl le litlhophiso tse ling tsa li-parameter tsa sensor li ka fetoloa ke Windows® Software.
Li-sensor tsa crm + li na le sebaka se foufetseng seo tekanyo ea sebaka se ke keng sa khoneha. Sebaka sa ts'ebetso se bonts'a sebaka sa sensor se ka sebelisoang ka mokhoa o tloaelehileng
diapoleisi tse nang le pokello e lekaneng ya tshebetso. Ha u sebelisa li-reflectors tse ntle, tse kang metsi a khutsitseng, sensor e ka boela ea sebelisoa ho fihlela boholo ba eona. Lintho tse monyang ka matla (mohlala, foam ea polasetiki) kapa li bonahatsa molumo o fapaneng (mohlala, majoe a majoe) le tsona li ka fokotsa mefuta e hlalositsoeng ea ts'ebetso.
Lintlha tsa Polokeho
- Bala litaelo tsa ts'ebetso pele o qala.
- Mesebetsi ea ho hokahanya, ho kenya le ho lokisa e ka etsoa feela ke basebetsi ba litsebi.
- Ha ho karolo ea polokeho ho latela EU Machine Directive, tšebeliso sebakeng sa ts'ireletso ea motho le mochini e sa lumelloeng.
Tšebeliso e Nepahetseng
crm+ ultrasonic sensors li sebelisoa bakeng sa ho bona lintho tse sa amaneng le batho.
Kamahanyo
Haeba maeto a kopano a bonts'itsoeng setšoantšong sa 1 bakeng sa li-sensor tse peli kapa ho feta li fetisitsoe ho lumellana ho kopantseng ho lokela ho sebelisoa. Hokela Sync/Comchannels (pin 5 ho liyuniti
e amohelehang) ea li-sensor tsohle (10 boholo).
 |
 |
|
| crm+25... crm+35... crm+130... crm+340... crm+600... |
≥0.35 m ≥0.40 m ≥1.10 m ≥2.00 m ≥4.00 m |
≥2.50 m ≥2.50 m ≥8.00 m ≥18.00 m ≥30.00 m |
Setšoantšo sa 1: Bohole ba kopano, e bontšang synchronization / multiplex
Multiplex mode
The Add-on-menu e lumella ho abela aterese ea motho ka mong »01« ho »10« ho sensor e 'ngoe le e' ngoe e hokahantsoeng ka Sync/ Com-channel (Pin5). Li-sensor li etsa tekanyo ea ultrasonic ka tatellano ho tloha tlase ho ea ho aterese e phahameng. Ka hona tšusumetso leha e le efe pakeng tsa li-sensor e haneloa. Aterese »00« e boloketsoe mokhoa oa ho hokahanya 'me e etsa hore ho be le mokhoa oa multiplex. Ho sebelisa mokhoa o hokahaneng, li-sensor tsohle li tlameha ho hlophisoa ho aterese »00«.
Ho kenya
Bokella sensor sebakeng sa ho kenya.
Hokela thapo ya sehokedi ho sehokedi sa M12, bona Setšoantšo sa 2.
 |
 |
mmala |
| 1 | +UB | sootho |
| 3 | –UB | putsoa |
| 4 | D2 | ntsho |
| 2 | D1 | tšoeu |
| 5 | Sync/Com | bohlooho |
Setšoantšo sa 2: Pina kabelo le view ho plug ea sensor le coding ea mebala ea thapo ea khokahano ea microsonic
E qalang
Hokela phepelo ea motlakase.
Beha li-parameter tsa sensor ka letsoho ka TouchControl (bona setšoantšo sa 3 le Setšoantšo sa 1)
kapa sebelisa mokhoa oa ho Ruta ho lokisa lintlha tsa ho lemoha (sheba setšoantšo sa 2).
Boemo ba feme
li-sensor tsa crm + li hlahisoa fektheri e entsoeng ka litlhophiso tse latelang:
- E fetola liphetho ho NOC
- Ho lemoha sebaka sa sebaka sa ts'ebetso le halofo ea sebaka sa ts'ebetso
- Methati ea litekanyo e behiloe ho bongata bo boholo
Tlhokomelo
Li-sensor tsa crm + li sebetsa mahala mahala.
Litšila tse nyane ka holim'a metsi ha li ame mosebetsi. Likarolo tse teteaneng tsa litšila le litšila tse kentsoeng li ama tšebetso ea sensor, ka hona li tlameha ho tlosoa.
Lintlha
- Ka lebaka la moralo ho bokana ha filimi ea PEEK le lesale la kopanelo la PTFE ha se bopaki ba khase.
- Ho hanyetsa lik'hemik'hale ho tlameha ho lekoa ka liteko haeba ho hlokahala.
- li-sensor tsa crm + li na le matšeliso a ka hare a mocheso. Hobane li-sensor li futhumatsa ka botsona, matšeliso a mocheso a fihla moo a sebetsang teng ka mor'a hoo e ka bang. Metsotso e 30 ea ts'ebetso.
- Nakong ea mokhoa o tloaelehileng oa ho sebetsa, lebone le mosehla la LED D2 le bontša hore tlhahiso ea ho fetola e hokahane.
- Nakong ea mokhoa o tloaelehileng oa ts'ebetso, tekanyo ea sebaka se lekantsoeng e bontšoa ho LED-indicator ka mm (ho fihlela ho 999 mm) kapa cm (ho tloha ho 100 cm). Sekala se fetoha ka bohona mme se bontshwa ke ntlha e hodima dinomoro.
- Nakong ea Tech-in mode, li-loops tsa hysteresis li khutlisetsoa ho litlhophiso tsa feme.
- Haeba ho se na lintho tse behiloeng sebakeng sa ponelopele, sesupo sa LED se bonts'a »– ––«.
- Haeba ha ho li-push-buttons tse hatelloang ka metsotsoana ea 20 nakong ea mokhoa oa ho beha parameter liphetoho tse entsoeng li bolokiloe 'me sensor e khutlela ho mokhoa o tloaelehileng oa ho sebetsa.
- Sensor e ka khutlisoa sebakeng sa eona sa fektheri, bona "Notlolo ea senotlolo le tlhophiso ea fektheri", Setšoantšo sa 3.
Hlahisa liparamente
Ka mokhoa o tloaelehileng oa ts'ebetso, sutumelletsa T1 haufinyane. Pontšo ea LED e bonts'a "PAR".
Nako le nako ha u tobetsa konopo ea T1, ho bontšoa litlhophiso tsa 'nete tsa tlhahiso ea analogue.
Lintlha tsa tekheniki
 |
 |
 |
 |
 |
 |
| sebaka se foufetseng | 0 ho isa ho 30 limilimithara | 0 bis 85 limilimithara | 0 ho isa ho 200 limilimithara | 0 ho isa ho 350 limilimithara | 0 ho isa ho 600 limilimithara |
| sebaka sa ts'ebetso | 250 limilimithara | 350 limilimithara | 1,300 limilimithara | 3,400 limilimithara | 6,000 limilimithara |
| boholo bo fapaneng | 350 limilimithara | 600 limilimithara | 2,000 limilimithara | 5,000 limilimithara | 8,000 limilimithara |
| angle ea ho hasana ha leballo | bona sebaka sa ho lemoha | bona sebaka sa ho lemoha | bona sebaka sa ho lemoha | bona sebaka sa ho lemoha | bona sebaka sa ho lemoha |
| maqhubu a transducer | 320 kHz | 360 kHz | 200 kHz | 120 kHz | 80 kHz |
| qeto | 0.025 limilimithara | 0.025 limilimithara | 0.18 limilimithara | 0.18 limilimithara | 0.18 limilimithara |
| libaka tsa ho lemoha bakeng sa lintho tse fapaneng: Libaka tse bohlooho bo lefifi li emela sebaka moo ho leng bonolo ho lemoha sebonela-hōle se tloaelehileng (bar e chitja). Sena se bontša mofuta o tloaelehileng oa ts'ebetso ea li-sensor. Libaka tse bohlooho bo bobebe li emela sebaka moo lebone le leholo haholo - mohlala poleiti - le ntse le ka bonoa. Tlhokahalo Mona ke bakeng sa ho tsamaisana hantle le sensor. Ho joalo ha ho khonehe ho hlahloba ultrasonic menahano e kantle sebaka sena. |
 |
 |
 |
 |
 |
| ho ikatisa | ±0.15% | ±0.15% | ±0.15% | ±0.15% | ±0.15% |
| nepahalo | ± 1% (Mocheso oa ho hoholeha ka hare o lefelloa, mohlomong ho tima 3),0.17%/K ntle le matšeliso) |
± 1% (Mocheso oa ho hoholeha ka hare o lefelloa, mohlomong ho tima 3),0.17%/K ntle le matšeliso) |
± 1% (Mocheso oa ho hoholeha ka hare o lefelloa, mohlomong ho tima 3), 0.17%/K ntle le matšeliso) |
± 1% (Mocheso oa ho hoholeha ka hare o lefelloa, mohlomong ho tima 3), 0.17%/K ntle le matšeliso) |
± 1% (Mocheso oa ho hoholeha ka hare o lefelloa, mohlomong ho tima 3), 0.17%/K ntle le matšeliso) |
| ts'ebetso voltage UB | 9 ho isa ho 30 V DC, nako e khutšoanyane ea potoloho, Sehlopha sa 2 | 9 ho isa ho 30 V DC, nako e khutšoanyane ea potoloho, Sehlopha sa 2 | 9 ho isa ho 30 V DC, nako e khutšoanyane ea potoloho, Sehlopha sa 2 | 9 ho isa ho 30 V DC, nako e khutšoanyane ea potoloho, Sehlopha sa 2 | 9 ho isa ho 30 V DC, nako e khutšoanyane ea potoloho, Sehlopha sa 2 |
| voltage ripple | ±10% | ±10% | ±10% | ±10% | ±10% |
| ha ho na mojaro phepelo hajoale | ≤ 80 mA | ≤ 80 mA | ≤ 80 mA | ≤ 80 mA | ≤ 80 mA |
| matlo | Tšepe e sa hloekang 1.4571, likarolo tsa polasetiki: PBT, TPU; Ultrasonic transducer: filimi ea PEEK, PTFE epoxy resin e nang le likhalase tsa khalase |
Tšepe e sa hloekang 1.4571, likarolo tsa polasetiki: PBT, TPU; Ultrasonic transducer: filimi ea PEEK, PTFE epoxy resin e nang le likhalase tsa khalase |
Tšepe e sa hloekang 1.4571, likarolo tsa polasetiki: PBT, TPU; Transducer ea Ultrasonic: filimi ea PEEK, PTFE epoxy resin e nang le likhalase | Tšepe e sa hloekang 1.4571, likarolo tsa polasetiki: PBT, TPU; Transducer ea Ultrasonic: filimi ea PEEK, PTFE epoxy resin e nang le likhalase | Tšepe e sa hloekang 1.4571, likarolo tsa polasetiki: PBT, TPU; Ultrasonic transducer: filimi ea PEEK, PTFE epoxy resin e nang le likhalase tsa khalase |
| Sehlopha sa tšireletso ho EN 60529 | IP67 | IP67 | IP67 | IP67 | IP67 |
| ho lumellana ho tloaelehileng | EN 60947-5-2 | EN 60947-5-2 | EN 60947-5-2 | EN 60947-5-2 | EN 60947-5-2 |
| mofuta oa khokahano | 5-pin initiator polaka, PBT | 5-pin initiator polaka, PBT | 5-pin initiator polaka, PBT | 5-pin initiator polaka, PBT | 5-pin initiator polaka, PBT |
| ditaolo | Li-push-button tse 2 (TouchControl) | Li-push-button tse 2 (TouchControl) | Li-push-button tse 2 (TouchControl) | Li-push-button tse 2 (TouchControl) | Li-push-button tse 2 (TouchControl) |
| litsupa | Pontšo ea LED ea linomoro tse 3, li-LED tse 2 tsa mebala e meraro | Pontšo ea LED ea linomoro tse 3, li-LED tse 2 tsa mebala e meraro | Pontšo ea LED ea linomoro tse 3, li-LED tse 2 tsa mebala e meraro | Pontšo ea LED ea linomoro tse 3, li-LED tse 2 tsa mebala e meraro | Pontšo ea LED ea linomoro tse 3, li-LED tse 2 tsa mebala e meraro |
| ka lenaneo | ka TouchControl le LinkControl | ka TouchControl le LinkControl | ka TouchControl le LinkControl | ka TouchControl le LinkControl | ka TouchControl le LinkControl |
| mocheso o sebetsang | –25 ho isa ho +70 ° C | –25 ho isa ho +70 ° C | –25 ho isa ho +70 ° C | –25 ho isa ho +70 ° C | –25 ho isa ho +70 ° C |
| mocheso oa polokelo | –40 ho isa ho +85 ° C | –40 ho isa ho +85 ° C | –40 ho isa ho +85 ° C | –40 ho isa ho +85 ° C | –40 ho isa ho +85 ° C |
| boima | 150 g | 150 g | 150 g | 210 g | 270 g |
| ho fetola hysteresis 1) | 3 limilimithara | 5 limilimithara | 20 limilimithara | 50 limilimithara | 100 limilimithara |
| switching frequency 2) | 25 Hz | 12 Hz | 8 Hz | 4 Hz | 3 Hz |
| nako ea karabo 2) | 32 ms | 64 ms | 92 ms | 172 ms | 240 ms |
| tieho ea nako pele e fumaneha | <300 ms | <300 ms | <300 ms | <380 ms | <450 ms |
| taelo No. | crm+25/DD/TC/E | crm+35/DD/TC/E | crm+130/DD/TC/E | crm+340/DD/TC/E | crm+600/DD/TC/E |
| phetoho ya tlhahiso | 2 x pnp, UB – 2 V, Imax = 2 x 200 mA switchable NOC/NCC, short-circuit-proof |
2 x pnp, UB – 2 V, Imax = 2 x 200 mA switchable NOC/NCC, short-circuit-proof |
2 x pnp, UB – 2 V, Imax = 2 x 200 mA switchable NOC/NCC, short-circuit-proof |
2 x pnp, UB – 2 V, Imax = 2 x 200 mA switchable NOC/NCC, short-circuit-proof |
2 x pnp, UB – 2 V, Imax = 2 x 200 mA switchable NOC/NCC, short-circuit-proof |
microsonic GmbH / Phoenixseestraße 7 / 44263 Dortmund / Jeremane /
T +49 231 975151-0 / F +49 231 975151-51 /
E info@microsonic.de /
W microsonic.de
Likahare tsa tokomane ena li itšetlehile ka liphetoho tsa tekheniki.
Lintlha tse tokomaneng ena li hlahisoa ka mokhoa o hlalosang feela.
Ha li fane ka tumello ea likarolo tsa sehlahisoa.
Mofuta oa 1 oa Khokahano
E sebelisoa feela indastering
mechine NFPA 79 dikopo.
Li-switches tse haufi li tla sebelisoa le a
E thathamisitsoeng (CYJV/7) kopano ea cable/sehokelo e lekantsoeng
bonyane 32 Vdc, bonyane 290 mA, ts'ebetsong ea ho qetela.
Litokomane / Lisebelisoa
 |
Microsonic crm+ Ultrasonic Sensors e nang le Liphetho tse peli tsa Switching [pdf] Buka ea Taelo crm 25-DD-TC-E, crm 35-DD-TC-E, crm 130-DD-TC-E, crm 340-DD-TC-E, crm 600-DD-TC-E, crm Ultrasonic Sensors with Two Liphetho tse Fetohang, Li-sensors tsa Ultrasonic tse nang le Liphetho tse peli tse fetohang, li-sensor tse nang le liphetho tse peli tse fetohang, liphetho tse peli tse fetohang. |
