PCI-DAS08
Kenyelletso ea Analog le Digital I/O
Bukana ea Mosebelisi
PCI-DAS08
Kenyelletso ea Analog le Digital I/O
Bukana ea Mosebelisi
Tokomane Revision 5A, June, 2006
© Copyright 2006, Measurement Computing Corporation
Letšoao la khoebo le Litaba tsa Tokelo
Measurement Computing Corporation, InstaCal, Universal Library, le Letshwao la Measurement Computing ke matshwao a kgwebo kapa matshwao a kgwebo a ngodisitsweng a Measurement Computing Corporation. Sheba karolo ea Copyrights & Trademarks ho mccdaq.com/legal bakeng sa tlhaiso-leseling e batsi mabapi le matšoao a khoebo a Measurement Computing. Mabitso a mang a lihlahisoa le a khamphani a boletsoeng mona ke matšoao a khoebo kapa mabitso a khoebo a lik'hamphani tse fapaneng.
© 2006 Measurement Computing Corporation. Litokelo tsohle li sirelelitsoe. Ha ho karolo ea sengoliloeng sena e ka hlahisoang bocha, ho bolokoa tsamaisong ea ho khutlisa, kapa ho fetisoa, ka mokhoa ofe kapa ofe ka mokhoa ofe kapa ofe, oa elektroniki, oa mochini, ka ho etsa likopi, ho rekota, kapa ka litsela tse ling ntle le tumello e ngotsoeng pele ea Measurement Computing Corporation.
| Hlokomela Measurement Computing Corporation ha e fane ka tumello ea sehlahisoa sefe kapa sefe sa Measurement Computing Corporation hore se sebelisoe litsamaisong tsa ts'ehetso ea bophelo le/kapa lisebelisoa ntle le tumello e ngotsoeng pele ho Measurement Computing Corporation. Lisebelisoa tsa ts'ehetso ea bophelo ke lisebelisoa kapa litsamaiso tseo, a) li reretsoeng ho kenngoa 'meleng ka ho buuoa, kapa b) ho tšehetsa kapa ho boloka bophelo le tseo ho hlōleha ha tsona ho ka lebelloang ho baka kotsi. Lihlahisoa tsa Measurement Computing Corporation ha lia etsoa ka likarolo tse hlokahalang, 'me ha li tlas'a tlhahlobo e hlokahalang ho netefatsa boemo ba botšepehi bo loketseng phekolo le tlhahlobo ea batho. |
HM PCI-DAS08.doc
Selelekela
Mabapi le Tataiso ea mosebelisi
Seo u tla ithuta sona ho tataiso ea mosebedisi
Tataiso ena ea mosebelisi e hlalosa boto ea ho fumana data ea Measurement Computing PCI-DAS08 mme e thathamisa lintlha tsa hardware.
Litumellano tataisong ea basebelisi
| Ho fumana lintlha tse ling Mongolo o hlahang lebokoseng o bolela boitsebiso bo eketsehileng bo amanang le taba eo ho buuoang ka eona. |
Tlhokomeliso! Lipolelo tsa tlhokomeliso tse nang le moriti li fana ka tlhaiso-leseling ho u thusa ho qoba ho intša kotsi le ho lematsa ba bang, ho senya lisebelisoa tsa hau, kapa ho lahleheloa ke data.
sebete mongolo Sebete mongolo o sebelisoa bakeng sa mabitso a lintho tse skrineng, joalo ka likonopo, mabokose a mongolo le mabokose a cheke.
mongolo o tšekaletseng mongolo Mongolo o tšekaletseng mongolo o sebelisoa bakeng sa mabitso a libuka le lihlooho tsa lihlooho tsa thuso, le ho hatisa lentsoe kapa poleloana.
Moo u ka fumanang lintlha tse ling
Lintlha tse ling mabapi le lisebelisoa tsa PCI-DAS08 lia fumaneha ho rona website at www.mccdaq.com. U ka ikopanya le Measurement Computing Corporation ka lipotso tse ikhethileng.
- Motheo oa tsebo: kb.mccdaq.com
- Foromo ea tšehetso ea theknoloji: www.mccdaq.com/support/support_form.aspx
- Lengolo-tsoibila: techsupport@mccdaq.com
- Mohala: 508-946-5100 'me u latele litaelo tsa ho fihlella Tech Support
Bakeng sa bareki ba machabeng, ikopanye le morekisi oa lehae oa hau. Sheba karolo ea International Distributors ho rona website at www.mccdaq.com/International.
Khaolo ea 1
Re hlahisa PCI-DAS08
Fetileview: Likarolo tsa PCI-DAS08
Bukana ena e hlalosa mokhoa oa ho lokisa, ho kenya, le ho sebelisa boto ea hau ea PCI-DAS08. PCI-DAS08 ke tekanyo ea mesebetsi e mengata le boto ea taolo e etselitsoeng ho sebetsa ka har'a likhomphutha tse nang le li-slots tsa lisebelisoa tsa libese tsa PCI.
Boto ea PCI-DAS08 e fana ka lintlha tse latelang:
- Lits'oants'o tse robeli tsa analoge ea 12-bit e felletseng
- Qeto ea 12-bit A/D
- Samplebelo la eona le fihla ho 40 kHz
- ± 5V sebaka sa ho kenya
- Lisebelisoa tse tharo tsa 16-bit
- Li-bits tse supileng tsa dijithale tsa I/O (kenyeletso e meraro, tlhahiso e mene)
- Sehokelo se tsamaellana le boto ea Measurement Computing's ISA-based CIO-DAS08
Boto ea PCI-DAS08 ke plug-and-play ka botlalo, ha e na li-jumpers kapa li-switches tse ka setang. Liaterese tsohle tsa boto li behiloe ke software ea boto ea plug-and-play.
Lisebelisoa tsa software
Ho fumana leseli mabapi le likarolo tsa InstaCal le software e 'ngoe e kenyellelitsoeng PCI-DAS08 ea hau, sheba Tataiso ea ho Qala ka Potlako e rometsoeng ka sesebelisoa sa hau. Tataiso ea ho Qala ka Potlako e fumaneha hape ka PDF ho www.mccdaq.com/PDFmanuals/DAQ-Software-Quick-Start.pdf.
Hlahloba www.mccdaq.com/download.htm bakeng sa mofuta oa morao-rao oa software kapa mefuta ea software e tšehelitsoeng tlas'a lits'ebetso tse sa sebelisoeng hangata.
Tataiso ea Mosebelisi ea PCI-DAS08 E Hlahisa PCI-DAS08
Setšoantšo sa PCI-DAS08 block
Mesebetsi ea PCI-DAS08 e bontšitsoe setšoantšong sa block se bontšitsoeng mona.
Setšoantšo sa 1-1. Setšoantšo sa PCI-DAS08 block
- Buffer
- 10 Volt Reference
- Analog Ho 8 CH SE
- Khetho ea Channel
- 82C54 16-bit Counters
- Kena oache0
- Heke0
- Oache ea tlhahiso0
- Kena oache1
- Heke1
- Oache ea tlhahiso1
- Heke2
- Oache ea tlhahiso2
- Kena oache2
- Dijithale I/O
- Kenyeletso (2:0)
- Sephetho (3:0)
- A/D Control
- Molaoli FPGA le Logic
- EXT_INT
Khaolo ea 2
Ho kenya PCI-DAS08
Thomello ea hau e tlisoa ke eng?
Lintho tse latelang li romelloa ka PCI-DAS08:
Lisebelisoa
- PCI-DAS08
Litokomane tse ling
Ntle le tataiso ena ea basebelisi ba Hardware, u lokela ho amohela Tataiso ea ho Qala ka Potlako (e fumanehang ho PDF ho www.mccdaq.com/PDFmanuals/DAQ-Software-Quick-Start.pdf). Bukana ena e fana ka tlhaloso e khuts'oane ea software eo u e fumaneng ka PCI-DAS08 ea hau le leseli mabapi le ho kenya software eo. Ka kopo bala bukana ena ka botlalo pele u kenya software kapa hardware.
Likarolo tsa boikhethelo
- Lithapo
C37FF-x C37FFS-x
- Ho felisoa ha matšoao le lisebelisoa tsa boemo
MCC e fana ka lihlahisoa tsa ho emisa matšoao hore li sebelisoe le PCI-DAS08. Sheba "Wiring ea tšimo, ho emisa lets'oao le boemo ba matšoao” bakeng sa lethathamo le felletseng la lisebelisoa tse lumellanang.
Ho bula PCI-DAS08
Joalo ka sesebelisoa leha e le sefe sa elektroniki, u lokela ho ba hlokolosi ha u ntse u sebetsana le eona ho qoba tšenyo ea motlakase o sa fetoheng. Pele o tlosa PCI-DAS08 ka har'a sephutheloana sa eona, itheole ka leqhama la letsoho kapa ka ho ama feela chassis ea komporo kapa ntho e 'ngoe e theohileng ho tlosa tefiso efe kapa efe e bolokiloeng e tsitsitseng.
Haeba likarolo tse ling li le sieo kapa li senyehile, tsebisa Measurement Computing Corporation hang-hang ka mohala, fekse kapa e-mail:
- Mohala: 508-946-5100 'me u latele litaelo tsa ho fihlella Tech Support.
- Fax: 508-946-9500 tlhokomelong ea Tech Support
- Lengolo-tsoibila: techsupport@mccdaq.com
Ho kenya software
Sheba Tataiso ea ho Qala ka Potlako bakeng sa litaelo tsa ho kenya software ho CD ea Measurement Computing Data Acquisition Software. Bukana ena e fumaneha ka PDF ho www.mccdaq.com/PDFmanuals/DAQ-Software-Quick-Start.pdf.
Ho kenya PCI-DAS08
Boto ea PCI-DAS08 ke plug-and-play ka botlalo. Ha ho li-switches kapa li-jumpers tse lokelang ho seta. Ho kenya boto ea hau, latela mehato e ka tlase.
| Kenya software ea MCC DAQ pele o kenya boto ea hau Mokhanni ea hlokahalang ho tsamaisa boto ea hau o kentsoe ka software ea MCC DAQ. Ka hona, o hloka ho kenya software ea MCC DAQ pele o kenya boto ea hau. Sheba Tataiso ea ho Qala ka Potlako bakeng sa litaelo tsa ho instola software. |
1. Koala komporo ea hau, tlosa sekoaelo, 'me u kenye boto ea hau sebakeng se fumanehang sa PCI.
2. Koala komporo ea hau 'me u e bulele.
Haeba u sebelisa sistimi e nang le ts'ehetso bakeng sa plug-and-play (joalo ka Windows 2000 kapa Windows XP), lebokose la puisano le hlaha ha sistimi e kenya e bonts'a hore hardware e ncha e fumanoe. Haeba litaba file hobane boto ena ha e so laeloe ho PC ea hau, o tla botsoa bakeng sa disk e nang le sena file. Software ea MCC DAQ e na le sena file. Haeba ho hlokahala, kenya Measurement Computing Data Acquisition Software CD ebe o tobetsa OK.
3. Ho leka kopo ea hau le ho hlophisa boto ea hau, tsamaisa sesebelisoa sa InstaCal se kentsoeng karolong e fetileng. Sheba Tataiso ea ho Qala ka Potlako e tlileng le boto ea hau bakeng sa tlhaiso-leseling mabapi le mokhoa oa ho qala le ho kenya InstaCal.
Haeba boto ea hau e felisitsoe ka nako e fetang metsotso e 10, lumella komporo ea hau hore e futhumale bonyane metsotso e 15 pele o fumana data. Nako ena ea ho futhumatsa e ea hlokahala hore boto e finyelle ho nepahala ha eona e lekantsoeng. Likarolo tsa lebelo le phahameng tse sebelisoang ka boto li hlahisa mocheso, 'me ho nka nako ena hore boto e fihle boemong bo tsitsitseng haeba e feletsoe ke nako e ngata.
Ho lokisa PCI-DAS08
Likhetho tsohle tsa tlhophiso ea Hardware ho PCI-DAS08 li laoloa ke software. Ha ho li-switches kapa li-jumpers tse lokelang ho seta.
Ho hokahanya boto bakeng sa ts'ebetso ea I/O
Lihokelo, likhoele – sehokelo se seholo sa I/O
Lethathamo la 2-1 le thathamisa lihokelo tsa boto, likhoele tse sebetsang le liboto tsa lisebelisoa tse lumellanang.
Lethathamo la 2-1. Lihokelo tsa Boto, lithapo, lisebelisoa tsa tlatsetso
| Mofuta oa sehokelo | Sehokedi sa "D" sa 37-pin |
| Lithapo tse lumellanang |
|
| Lihlahisoa tsa lisebelisoa tse lumellanang (ka thapo ya C37FF-x) |
CIO-MINI37 SCB-37 ISO-RACK08 |
| Lihlahisoa tsa lisebelisoa tse lumellanang (ka thapo ya C37FFS-x) |
CIO-MINI37 SCB-37 ISO-RACK08 CIO-EXP16 CIO-EXP32 CIO-EXP-GP CIO-EXP-BRIDGE16 CIO-EXP-RTD16 |
Setšoantšo sa 2-1. Pinout ea sehokelo se ka sehloohong
1 +12V
2 CTR1 CLK
3 CTR1 TSOA
4 CTR2 CLK
5 CTR2 TSOA
6 CTR3 TSOA
7 DOUT1
8 DOUT2
9 DOUT3
10 DOUT4
11 DGND
12 LLGND
13 LLGND
14 LLGND
15 LLGND
16 LLGND
17 LLGND
18 LLGND
19 10VREF
20 -12V
21 CTR1 MAKO
22 CTR2 MAKO
23 CTR3 MAKO
24 EXT INT
25 DIN1
26 DIN2
27 DIN3
28 DGND
29 +5V
30 CH7
31 CH6
32 CH5
33 CH4
34 CH3
35 CH2
36 CH1
37 CH0
Setšoantšo sa 2-2. C37FF-x cable
a) Mothalo o mofubelu o supa phini # 1
Setšoantšo sa 2-3. C37FFS-x cable
Tlhokomeliso! Haeba AC kapa DC voltage kholo ho feta 5 volts, u se ke ua hokahanya PCI-DAS08 mohloling ona oa matšoao. O ka nqane ho mefuta e ka sebelisoang ea boto, 'me u tla hloka ho lokisa sistimi ea hau ea motheo kapa ho eketsa boemo bo khethehileng ba lets'oao la ho itšehla thajana ho nka litekanyo tse sebetsang. A ground offset voltage fetang 7 volts e ka senya boto ea PCI-DAS08 mohlomong le komporo ea hau. Leqhubu la offsettage kholo ho feta 7 volts e tla senya lisebelisoa tsa hau tsa elektroniki, 'me e ka ba kotsi bophelong ba hau.
Wiring ea tšimo, ho emisa lets'oao le boemo ba matšoao
U ka sebelisa liboto tse latelang tsa MCC tsa "screw terminal" ho felisa matšoao le ho li tsamaisa ka har'a boto ea PCIDAS08 u sebelisa thapo ea C37FF-x kapa C37FFS-x:
- CIO-MINI37 - Boto ea li-screw tsa 37-pin. Lintlha ka sehlahisoa sena li fumaneha ho www.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=102&pf_id=255.
- SCB-37 - Li-conductor tse 37, khokahano ea lets'oao le sirelelitsoeng / lebokose la "screw terminal" le fanang ka likhokahano tse peli tse ikemetseng tsa 50pin. Lintlha ka sehlahisoa sena li fumaneha ho www.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=196&pf_id=1166.
MCC e fana ka lihlahisoa tse latelang tsa boemo ba analog hore li sebelisoe le boto ea hau ea PCI-DAS08:
- ISO-RACK08 - Isolated 8-channel, 5B module rack bakeng sa boemo ba matšoao a analog le katoloso. Lintlha tse mabapi le sehlahisoa sena li fumaneha ho rona web site at www.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=127&pf_id=449.
- CIO-EXP16 - Boto ea analog e mengata ea liteishene tse 16 e nang le sensor ea CJC e ka har'a board. Lintlha tse mabapi le sehlahisoa sena li fumaneha ho rona web site at www.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=126&pf_id=249.
- CIO-EXP32 - Boto ea analog e mengata ea liteishene tse 32 e nang le sensor ea CJC le 2 Gain amps. Lintlha tse mabapi le sehlahisoa sena li fumaneha ho rona web site at www.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=126&pf_id=250.
- CIO-EXP-GP - Boto ea katoloso ea likanale tse 8 e nang le boemo ba matšoao a ho hanyetsa. Lintlha tse mabapi le sehlahisoa sena li fumaneha ho rona web site at www.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=126&pf_id=244.
- CIO-EXP-BRIDGE16 - Boto ea katoloso ea likanale tse 16 e nang le boemo ba matšoao a borokho ba Wheatstone. Lintlha tse mabapi le sehlahisoa sena li fumaneha ho rona web site at www.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=126&pf_id=243.
- CIO-EXP-RTD16 - Boto ea katoloso ea liteishene tse 16 tse nang le boemo ba lets'oao la RTD. Lintlha tse mabapi le sehlahisoa sena li fumaneha ho rona web site at www.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=126&pf_id=248.
| Tlhahisoleseding mabapi le dikgokelo tsa matshwao Tlhahisoleseding e akaretsang mabapi le kgokelo ya matshwao le tlhophiso e fumaneha ho Bukana ya Dikgokelo tsa Matshwao. Tokomane ena e fumaneha ho http://www.measurementcomputing.com/signals/signals.pdf. |
Khaolo ea 3
Mananeo le ho Ntlafatsa Lisebelisoa
Ka mor'a ho latela litaelo tsa ho kenya Khaolong ea 2, boto ea hau joale e lokela ho kenngoa 'me e loketse ho sebelisoa. Leha boto e le karolo ea lelapa le leholoanyane la DAS, ha ho ngollano lipakeng tsa liboto tse fapaneng. Software e ngotsoeng boemong ba ngoliso bakeng sa mefuta e meng ea DAS e ke ke ea sebetsa ka nepo le boto ea PCIDAS08.
Lipuo tsa mananeo
Measurement Computing's Universal LibraryTM e fana ka phihlello ea mesebetsi ea boto ho tsoa lipuong tse fapaneng tsa mananeo a Windows. Haeba u rera ho ngola mananeo, kapa u ka rata ho tsamaisa example mananeo a Visual Basic kapa puo efe kapa efe, a bua ka Bukana ea Basebelisi ba Laeborari ea Universal (e fumanehang ho rona. web site at www.mccdaq.com/PDFmanuals/sm-ul-user-guide.pdf).
Mananeo a phuthetsoeng a kopo
Mananeo a mangata a phuthetsoeng a kopo, joalo ka SoftWIRE le HP-VEETM, joale a na le bakhanni ba boto ea hau. Haeba sephutheloana seo u nang le sona ha se na likhanni tsa boto, ka kopo fekse kapa u romelle lengolo-tsoibila lebitso la sephutheloana le nomoro ea ntlafatso ho tsoa ho li-disk tsa ho kenya. Re tla u batlela sephutheloana sena mme re u eletse mokhoa oa ho fumana bakhanni.
Li-driver tse ling li kenyellelitsoe le sephutheloana sa Universal Library, empa eseng ka sephutheloana sa kopo. Haeba u rekile sephutheloana sa lits'ebetso ka kotloloho ho tsoa ho morekisi oa software, ho ka 'na ha hlokahala hore u reke Universal Library ea rona le li-driver. Ka kopo ikopanye le rona ka mohala, fax kapa e-mail:
- Mohala: 508-946-5100 'me u latele litaelo tsa ho fihlella Tech Support.
- Fax: 508-946-9500 tlhokomelong ea Tech Support
- Lengolo-tsoibila: techsupport@mccdaq.com
Mananeo a boemo ba ngoliso
U lokela ho sebelisa Laeborari ea Bokahohle kapa e 'ngoe ea li-program tsa kopo tse pakiloeng tse boletsoeng ka holimo ho laola boto ea hau. Ke baetsi ba mananeo ba nang le boiphihlelo feela ba lokelang ho leka mananeo a boemo ba ngoliso.
Haeba o hloka ho etsa lenaneo boemong ba ho ngolisa kopo ea hau, o ka fumana lintlha tse ling ho Register Map bakeng sa PCI-DAS08 Series (e fumanehang ho www.mccdaq.com/registermaps/RegMapPCI-DAS08.pdf).
Khaolo ea 4
Litlhaloso
E tloaelehileng bakeng sa 25 ° C ntle le ha ho boletsoe ka tsela e 'ngoe.
Litlhaloso tse ngotsoeng ka mongolo o tšekaletseng li tiisitsoe ke moralo.
Kenyelletso ea Analog
Letlapa la 1. Litlhaloso tsa ho kenya analoji
| Paramethara | Tlhaloso |
| Mofuta oa converter ea A/D | AD1674J |
| Qeto | 12 likotoana |
| Mekhahlelo | ± 5 V |
| A/D pacing | Software e ile ea hlahlojoa |
| Mekhoa ea ho qala ea A/D | Digital: Software polling of digital input (DIN1) e latelwang ke pacer loading le tlhophiso. |
| Phetiso ea data | Software e ile ea hlahlojoa |
| Polarity | Bipolar |
| Palo ea likanale | 8 e felileng |
| Nako ea phetoho ea A/D | 10µs |
| Phello | 40 kHz e tloaelehileng, e itšetlehile ka PC |
| Ho nepahala ho amanang | ± 1 LSB |
| Phoso ea mola o fapaneng | Ha ho na likhoutu tse sieo tse tiisitsoeng |
| Phoso e felletseng ea linearity | ± 1 LSB |
| Fumana ho hoholeha (litlhaloso tsa A/D) | ±180 ppm/°C |
| Zero Drift (litlhaloso tsa A/D) | ±60 ppm/°C |
| Kenyo ea nako ea ho lutla | ± 60 nA ho feta mocheso |
| Kenyelletso ea ho kenya | 10 MegOhm mets |
| Absolute maximum input voltage | ± 35 V |
| Kabo ea lerata | (Sekhahla = 1-50 kHz, Karolelano ea % ± 2 bins, Karolelano ea % ± bin 1, Karolelano ea meqomo ea #) Bipolar (5 V): 100% / 100% / 3 meqomo |
Kenyelletso / tlhahiso ea dijithale
Lethathamo la 2. Litlhaloso tsa Digital I / O
| Paramethara | Tlhaloso |
| Mofuta oa dijithale (sehokelo sa mantlha): | Tlhahiso: 74ACT273 |
| Tlhaloso: 74LS244 | |
| Tlhophiso | 3 tlhahiso e tsitsitseng, 4 tlhahiso e tsitsitseng |
| Palo ea likanale | 7 |
| Sephetho se phahameng | 3.94 volts min @ -24 mA (Vcc = 4.5 V) |
| Khumo e tlase | 0.36 volts max @ 24 mA (Vcc = 4.5 V) |
| Kenyo e phahameng | 2.0 volts min, 7 volts absolute max |
| Kenyo e tlase | 0.8 volts max, -0.5 volts absolute min |
| Litšitiso | INTA # - e 'mapa ho IRQn ka PCI BIOS ka nako ea ho qala |
| Thibela lumella | E ka rarolloa ka molaoli oa PCI: 0 = e holofetse 1 = e lumelletsoe (ea kamehla) |
| Ho sitisa mehloli | Mohloli oa kantle (EXT INT) Polarity e ka hlophisoa ka molaoli oa PCI: 1 = hodimo e sebetsang 0 = e tlase e sebetsang (ea kamehla) |
Karolo ea li-counter
Lethathamo la 3. Litlhaloso tsa li-counter
| Paramethara | Tlhaloso |
| Mofuta oa counter | Sesebelisoa sa 82C54 |
| Tlhophiso | Li-counter tse 3 tse tlase, li-bits tse 16 ka 'ngoe |
| Khaontara 0 – Sebali sa mosebelisi 1 | Mohloli: E fumaneha ho sehokelo sa basebelisi (CTR1CLK) Heke: E fumaneha ho sehokelo sa mosebelisi (CTR1GATE) Sephetho: E fumaneha ho sehokelo sa mosebelisi (CTR1OUT) |
| Khaontara 1 – Sebali sa mosebelisi 2 | Mohloli: E fumaneha ho sehokelo sa basebelisi (CTR2CLK) Heke: E fumaneha ho sehokelo sa mosebelisi (CTR2GATE) Sephetho: E fumaneha ho sehokelo sa mosebelisi (CTR2OUT) |
| Counter 2 - counter counter 3 kapa Interrupt Pacer | Mohloli: Oache e buffered PCI (33 MHz) e arotsoe ka 8. Heke: E fumaneha ho sehokelo sa mosebelisi (CTR3GATE) Output: E fumaneha ho mosebedisi sehokelo (CTR3OUT) mme e ka ba software e hlophisitsoeng joalo ka Interrupt Pacer. |
| Nako ea ho kenya oache | 10 MHz boholo |
| Bophara ba lebelo le phahameng (ho kenya oache) | 30 ns mets |
| Bophahamo bo tlase ba lebelo (ho kenya oache) | 50 ns mets |
| Bophara ba heke holimo | 50 ns mets |
| Bophara ba heke bo tlase | 50 ns mets |
| Kenyelletso ea molumo o tlasetage | 0.8 V, max |
| Input phahameng voltage | 2.0 V mets |
| Sephetho se tlase voltage | 0.4 V, max |
| Palo e phahameng voltage | 3.0 V mets |
Tšebeliso ea matla
Letlapa la 4. Litlhaloso tsa tšebeliso ea matla
| Paramethara | Tlhaloso |
| +5 V e sebetsang (A/D e fetohela ho FIFO) | 251 mA e tloaelehileng, 436 mA max |
| + 12 V | 13 mA e tloaelehileng, 19 mA max |
| -12 V | 17 mA e tloaelehileng, 23 mA max |
Tikoloho
Tafole ea 5. Litlhaloso tsa tikoloho
| Paramethara | Tlhaloso |
| Boemo ba mocheso o sebetsang | 0 ho isa ho 50 °C |
| Sebaka sa mocheso oa polokelo | -20 ho isa ho 70 ° C |
| Mongobo | 0 ho isa ho 90% e sa tsitsang |
Sehokelo se ka sehloohong le ho penya
Letlapa la 6. Litlhaloso tse kholo tsa sehokelo
| Paramethara | Tlhaloso |
| Mofuta oa sehokelo | Sehokedi sa "D" sa 37-pin |
| Lithapo tse lumellanang |
|
| Lihlahisoa tse tsamaellanang le thapo ea C37FF-x | CIO-MINI37 SCB-37 ISO-RACK08 |
| Lihlahisoa tse tsamaellanang le thapo ea C37FFS-x | CIO-MINI37 SCB-37 ISO-RACK08 CIO-EXP16 CIO-EXP32 CIO-EXP-GP CIO-EXP-BRIDGE16 CIO-EXP-RTD16 |
Letlapa la 7. Pin ea sehokelo se seholo kantle
| Pin | Lebitso la Letshwao | Pin | Lebitso la Letshwao |
| 1 | +12V | 20 | -12V |
| 2 | CTR1 CLK | 21 | CTR1 KHOE |
| 3 | CTR1 TSOA | 22 | CTR2 KHOE |
| 4 | CTR2 CLK | 23 | CTR3 KHOE |
| 5 | CTR2 TSOA | 24 | EXT INT |
| 6 | CTR3 TSOA | 25 | DIN1 |
| 7 | Dout1 | 26 | DIN2 |
| 8 | Dout2 | 27 | DIN3 |
| 9 | Dout3 | 28 | DGND |
| 10 | Dout4 | 29 | +5V |
| 11 | DGND | 30 | CH7 |
| 12 | LLGND | 31 | CH6 |
| 13 | LLGND | 32 | CH5 |
| 14 | LLGND | 33 | CH4 |
| 15 | LLGND | 34 | CH3 |
| 16 | LLGND | 35 | CH2 |
| 17 | LLGND | 36 | CH1 |
| 18 | LLGND | 37 | CH0 |
| 19 | 10V REF |
Phatlalatso ea ho lumellana
Moetsi: Measurement Computing Corporation
Aterese: 10 Commerce Way
Suite 1008
Norton, MA 02766
usa
Sehlopha: Thepa ea motlakase bakeng sa ho metha, taolo le tšebeliso ea laboratori.
Measurement Computing Corporation e phatlalatsa tlas'a boikarabello bo le bong hore sehlahisoa
PCI-DAS08
eo phatlalatso ena e amanang le eona e lumellana le lipehelo tse amehang tsa litekanyetso tse latelang kapa litokomane tse ling:
EU EMC Directive 89/336/EEC: Tšebelisano ea Motlakase, EN55022 (1995), EN55024 (1998)
Mesi: Sehlopha sa 1, Sehlopha sa B
- EN55022 (1995): Mesi e hlahisoang ke mahlaseli le ho etsoa.
Tšireletso: EN55024
- EN61000-4-2 (1995): Tšireletso ea ho tsoa ha Electrostatic Discharge, Lintlha tsa A.
- EN61000-4-3 (1997): Mokhoa oa ho itšireletsa oa Tšimo ea Radiated Electromagnetic Field A.
- EN61000-4-4 (1995): Mokhoa oa ho itšireletsa oa Motlakase ka Potlako o Fetelang ka Nakoana A.
- EN61000-4-5 (1995): Mekhoa ea ho itšireletsa mafung ea surge A.
- EN61000-4-6 (1996): Mokhoa oa ho itšireletsa oa Radio Frequency Common Mode A.
- EN61000-4-8 (1994): Matla a Frequency Magnetic Field Immunity Criteria A.
- EN61000-4-11 (1994): Moqtage Dip and Interrupt immune immune Criteria A.
Declaration of Conformity e thehiloeng litekong tse entsoeng ke Chomerics Test Services, Woburn, MA 01801, USA ka September, 2001. Litlaleho tsa liteko li hlalositsoe ho Chomerics Test Report #EMI3053.01.
Ka hona re phatlalatsa hore thepa e boletsoeng e lumellana le Litaelo le Maemo a ka holimo.
Carl Haapaoja, Mookameli oa Tiisetso ea Boleng
Litokomane / Lisebelisoa
 |
Logicbus PCI-DAS08 Analog Input le Digital I/O [pdf] Bukana ea Mosebelisi PCI-DAS08 Analog Input le Digital IO, PCI-DAS08, Analog Input le Digital IO |
