KORG Multi Poly Analog Modeling Synthesizer

 

Litlhaloso

• Sehlahisoa: Multi / poly Analog Modeling Synthesizer
• Software Version: 1.0.2 kapa hamorao
• Sistimi ea Ts'ebetso:
  • MacOS: Mac OSX 10.12 ka macOS 15, Intel kapa Apple Silicon
  • Windows: Windows 10 le 11, liphetolelo tsa 64-bit feela. Ts'ebetso ea "touch panel" ha e sebetse.

Litaelo tsa Tšebeliso ea Sehlahisoa

Ho kenya

Ho kenya mofuta oa multi/poly software 1.0.2 kapa hamorao:

Sheba mofuta oa software oa multi/poly:

1. Tobetsa UTILITY ebe SHIFT + < (LEQEPHE -).

Sena se tla u isa leqepheng la About. Nomoro ea phetolelo e bontšoa ka holimo ho skrine. Haeba mofuta o ka tlase ho 1.0.2 o tla hloka ho nchafatsa multi/poly pele o tsoela pele. Software ea morao-rao e mengata e ka kenngoa ka Korg System Updater, e jarollotsoeng ho Korg websaete (http://www.korg.com/ ).

Ke eng e kentsoeng khomphuteng ea ka, hona hobane'ng?
Mohlophisi/Mohlokomeli oa libuka o buisana le batho ba bangata ba sebelisa marang-rang ka USB, ho fapana le MIDI. Ho tsebahatsa le ho hokahana le multi/poly holim'a marang-rang, Editor/Laebrari e sebelisa maemo a mDNS. Ho Windows, sena se hloka Bonjour ea Apple Inc., kahoo sena se kentsoe hammoho le sesebelisoa sa Editor/Laebrari.

USB Network e tlameha ho hlophisoa ho NCM
Ho sebelisa Sehlophisi/Molaeborari, paramethara ea Marang-rang ea USB ea multi/poly e tlameha ho hlophisoa ho NCM.

Ho etsa bonnete ba hore sena se hlophisitsoe hantle:

1. Tobetsa UTILITY habeli, ebe u tšoara SHIFT ebe o tobetsa > (LEQEPHE +).
   Sena se u isa leqepheng la MIDI & USB, joalo ka ha ho bonts'itsoe ka tlase.
2. Etsa bonnete ba hore USB Network e setetsoe ho NCM.
3. Haeba u ne u tlameha ho fetola sena ho tloha ho RNDIS ho ea ho NCM, tima 'me u qale sesebelisoa pele u tsoela pele.

USB Network
[RNDIS, NCM]

• RNDIS: Ena ke protocol ea lefa la RNDIS, e seng e sa tšehetsoe ke Mohlophisi/Mohlokomeli oa libuka.
• NCM: Ena ke protocol ea Network Control Model, e sebelisoang le MacOS le Windows 10 le hamorao.

Bohlokoa: Liphetoho ho paramethara ena li qala ho sebetsa feela kamora hore multi/poly e tingoe le ho qala bocha.

MacOS

Ho kenya software ho MacOS:

1. Ho multi/poly, etsa bonnete ba hore parameter ea USB Network e behiloe ho NCM.
   Ho fumana lintlha tse ling, sheba "USB Network e tlameha ho hlophisoa ho NCM" leqepheng la 4.
2. Hokela multi/poly ea hau khomphuteng ka USB.
3. Bula Multi/poly Editor/Laebrari [nomoro ea phetolelo] .dmg file ho Finder.
   Setšoantšo sa disk se tla buleha.
4. Ho setšoantšo sa disk, bula multi/poly Editor/Laebrari [nomoro ea phetolelo] .pkg file.
   Sesebelisoa se tla qala.
5. Latela litaelo tse skrineng ho phethela ho instola. Kenya phasewete ea hau ea molaoli ha u botsoa.

Ho kengoa ho tla sebetsa, 'me sesebelisoa sa Editor/Laebrari se tla kengoa ho Applications/KORG/multi/poly.

Windows

Ho kenya software ho Windows 10 kapa hamorao (liphetolelo tsa pejana ha li tšehetsoe):

1. Ho multi/poly, etsa bonnete ba hore parameter ea USB Network e behiloe ho NCM.
   Ho fumana lintlha tse ling, sheba "USB Network e tlameha ho hlophisoa ho NCM" leqepheng la 4.
2. Tobetsa habeli "Korg multi/poly Editor/Laebrari [nomoro ea mofuta] Installer.exe."
   Sesebelisoa se tla qala.
3. Latela litaelo tse skrineng ho phethela ho instola.
   Ho kengoa ho tla sebetsa, ho kenyeletsoa sesebelisoa sa Editor/Laebrari, Apple Inc.'s Bonjour, le tšehetso ea marang-rang ea NCM (ho sebelisa li-driver tse tloaelehileng tsa Windows).
4. Hokela multi/poly ea hau khomphuteng ka USB.
   Maemong a mang, li-multi/poly li ka 'na tsa se ke tsa tsejoa hang ka mor'a ho kenya. Haeba sena se etsahala, qala komporo ea hau hape.

Litlhoko tsa Ts'ebetso

Ho sebelisa Multi/poly Editor/Laebrari:

• Netefatsa hore multi/poly ea hau e sebelisa software version 1.0.2 kapa hamorao.
• U hloka thapo ea USB le komporo ea Mac kapa Windows e nang le USB e fihlelang litlhoko tse boletsoeng.

Hlokomela: Ts'ebetso e felletseng ha e hlile ha e tiisetsoe ka likhomphutha tsohle, leha li khotsofatsa litlhoko tsena tsa sistimi.

MacOS
Mac OSX 10.12 ka macOS 15, Intel kapa Apple Silicon.

Windows
Windows 10 le 11, liphetolelo tsa 64-bit feela. Ts'ebetso ea "touch panel" ha e sebetse.

Tlhophiso ea netweke ea USB

Ho theha parameter ea netweke ea USB ka nepo:

1. Tobetsa UTILITY habeli ebe u tšoara SHIFT ebe o tobetsa > ( LEQEPHE +)
   ho fihlella leqephe la MIDI & USB.
2. Beha USB Network ho NCM. Haeba e fetotsoe ho tloha ho RNDIS ho ea ho NCM, qala bocha
   seletsa.

Ho sebelisa Mohlophisi/Molaeborari

Ho qala Multi/poly Editor/Laebrari:

• Mohlophisi/Mohlokomeli oa Libuka o na le mekhoa e 'meli: Mohlophisi le Mohlokomeli oa Libuka, tse khethiloeng ka ho sebelisa likonopo tse ka holimo ho le letona la fensetere e kholo.
• Fetoha lipakeng tsa mekhoa ha ho hlokahala, u hlokomele hore litaelo tse ling tsa menu li ka fapana lipakeng tsa mekhoa.
• Kenya software 'me u hokelle mefuta e mengata ka USB, joalo ka ha ho hlalositsoe tlasa "Install" leqepheng la 4.
  Khokelo ea USB ea hlokahala.
• Qala multi/poly Editor/Laeborari.

U ka fumana sesebelisoa sa Multi/poly Editor/Laebrari libakeng tse latelang, ho latela sistimi e sebelisoang:
Ho MacOS, Multi/poly Editor/Laebrari e kentsoe ho Likopo/KORG/multi/poly.
Ho Windows, u ka fumana Multi/poly Editor/Laebrari tlas'a KORG/multi/poly ho Mananeo Tsohle, Start Menu, joalo-joalo.

Ho sebelisa Mohlophisi/Moqolotsi oa libuka o nang le li-multi/poly tse peli kapa ho feta
Bohlokoa: Pele o hokela li-multi/poly tse ngata, etsa bonnete ba hore u beha ID ea sistimi ea sesebelisoa ho nomoro e fapaneng.

Ho seta ID ea Multi/poly's System:

1. Tobetsa konopo ea UTILITY ho ea leqepheng la ho Seta Sistimi.
   Haeba leqephe le fapaneng le hlaha qalong, tobetsa UTILITY hape.
2. Beha parameter ea ID ea Sistimi, ka tlase ho leqephe, joalo ka ha u batla.
   Nomoro e khethehileng ha e bohlokoa; etsa bonnete ba hore li-multi / polys tse hokahantsoeng li na le li-ID tse fapaneng tsa Sistimi.
3. Ka har'a Multi/poly Editor/Laebrari, sebelisa menu ea Lisebelisoa ho khetha mefuta e mengata e lakatsehang.
   Hlokomela hore data e ke ke ea kopitsoa ka kotloloho ho tloha ho tse ngata ho ea ho tse ling; ho e-na le hoo, sebelisa Export ho boloka data ho tsoa ho mefuta-futa ea pele, 'me u kenye ho kenya data ho multi/poly ea bobeli.

Mekhoa e 'meli: Mohlophisi le Ralibuka
Likonopo tse ka holimo ka letsohong le letona la fensetere e kholo li khetha hore na u sebetsa le Mohlophisi kapa Ralibuka. Hangata, o ka fetola pakeng tsa tse peli ntle le ho nahana ka eona. Ho bohlokoa ho hlokomela, leha ho le joalo, hore litaelo tse ling tsa menyu li ka fumaneha ka mokhoa o le mong feela, 'me tokollo eo e sebetsoa ka thoko bakeng sa mofuta o mong le o mong.

Litaelo tsa menu
Ka kakaretso, menu e laela bakeng sa file ts'ebetso, joalo ka ho reka kantle ho naha, ho romela kantle ho naha, ho boloka litšupiso, le ho khutlisa, li fumaneha feela ha Mohlokomeli oa Libuka a ntse a sebetsa. Ka mokhoa o ts'oanang, litaelo tsa menu bakeng sa ho boloka Lits'ebetso li fumaneha feela ha Sehlophisi se sebetsa.

Etsolla/Etsa hape
Multi/poly Editor/Laebrari e ts'ehetsa maemo a mangata a ho etsolla le ho etsa bocha bakeng sa liketso tse ngata, ho kenyelletsa ho kenya data, ho hlakola, ho reha bocha, ho hlophisa manane a behiloeng, maemo a ho hlophisa, joalo-joalo. Ka mohlala, o ka kenya bongata file e nang le lintho tse sekete, ebe u reha mabitso ohle a Mananeo a hau, 'me u etsolle liketso tseo ka bobeli ka mokhoa o sireletsehileng. Hlokomela hore ho khutlisa ho tsoa ho "backup" ha ho khonehe. Etsolla/etsa hape li-buffers li bolokiloe ka thoko bakeng sa mekhoa ea Librarian le Editor. U tla bona sena ho litaelo tsa menu, tseo mabitso a tsona a fetohang ho latela mokhoa oa ho Librarian Undo/Redo kapa Editor Undo/Redo, ka ho latellana.

LBH

• P: Ke lokela ho etsa eng haeba mofuta oa ka oa multi/poly software o ka tlase 1.0.2?
  A: Nchafatsa software ka ho sebelisa Korg System Updater e fumanehang ho Korg websebaka.
• P: Ke tseba joang haeba komporo ea ka e fihlela litlhoko tsa sebelisa Mohlophisi/Mohlokomeli oa libuka?
  A: Netefatsa hore Mac ea hau e sebelisa Mac OSX 10.12 ho ea ho macOS 15 kapa Windows 10/11 bakeng sa Windows PC.

Selelekela

Mabapi le Multi/poly Editor/Laeborari
Multi/poly Editor/Laebrari e o dumella ho hlophisa le ho hlophisa datha ho multi/poly e hoketsweng komporong ya Mac kapa Windows ka USB, le ho fetisetsa data ya medumo pele le morao pakeng tsa multi/poly le komporo.

Ka mohlala, u ka:

• Fetola Manane a Sete, Litšebetso, Mananeo, Tatelano ea Motion, Litsela tsa Tatelano ea Motion, le Sekala
• Sheba tsoelo-pele ea tatellano le liphetho tsa modulation ka nako ea sebele
• Kenya Wavetables ka mekhoa e tloaelehileng ea wavetable
• Etsa bekapo 'me u tsosolose lintlha tsohle tsa multi/poly
• Sebelisa Import le Export ho fetisetsa melumo ho tsoa le ho tsoa komporong ea hau, kapa ho tloha ho mefuta e mengata ho ea ho e 'ngoe
• Hlophisa metadata bakeng sa melumo ea basebelisi (Seta manane, Lits'ebetso, Mananeo, Wavetables, Motion Sequences, Motion Sequence Lanes, le Scales), ho kenyeletsoa Lebitso, Likarolo le Lipokello (joalo ka ha ho bonts'itsoe ponts'ong ea mefuta e mengata), hammoho le metadata e eketsehileng e kenyelletsang Mongoli le lintlha tsa molumo.

Nahana ka Mohlophisi/Mohlokomeli oa libuka e le pontšo ea ka ntle bakeng sa batho ba bangata

Bohlokoa: Ho molemo ho nahana ka Mohlophisi/Mohlokomeli oa libuka e le pontšo ea ka ntle bakeng sa mefuta e mengata, ho e-na le lenaneo le arohaneng. Ntho e 'ngoe le e 'ngoe eo u e bonang fensetereng e ka sehloohong ea Mohlophisi/Molaeborari le Lethathamo la Setha e hlile e bolokiloe ho mefuta e mengata e hokahaneng.
Ha o etsa liphetoho kapa o kenya datha le Mohlophisi/Molaeborari, o hlophisa ka kotloloho data ho multi/poly e hokahantsoeng. Mohlophisi/Molaeborari a ka romella data ho komporo ea hau (bakeng sa ho boloka, kapa ho fetisetsa ho tse ling tse ngata), empa ha e na data ea eona. Sena se boetse se bolela hore Mohlophisi/Mohlokomeli a ke ke a sebelisoa "ntle le marang-rang;" e sebetsa feela ha e hokahane le multi/poly.

Litemoso
Se ke oa hakolla multi/poly ea hau ho USB, kapa ua tima motlakase oa eona, ha Mohlophisi/Mohlokomeli oa libuka a ntse a sebetsa. Se ke oa sebelisa bongata ba hau ha data e ntse e fetisoa.

Ho sebelisa Editor

Tšebeliso ea motheo

Hlokomela: Bukana ena e hlalosa mokhoa oa ho sebelisa sesebelisoa sa Editor. Bakeng sa lintlha tse mabapi le mokhoa oa ho sebelisa multi/poly, le hore na mesebetsi ea eona le liparamente li sebetsa joang, ka kopo bona Tataiso ea Ts'ebetso ea Multi/Poly.

Li-knobs le li-slider
Ho lokisa li-knob, hula ka holimo. Ho lokisa boleng ba seselaete, hula ka lehlakoreng la selaete. Li-knob le li-slider tse ngata le tsona li ka hlophisoa ka ho tsamaisa cursor holim'a taolo, ebe ka ho sebelisa lebili la mouse kapa ho hula trackpad. Mokhelo ke ha li-control li le lethathamong la ho tsamaisoa, joalo ka liphanele tse felletseng tsa ho hlophisa. Mathathamong ana, lebili la toeba le ho hula ha trackpad li sebelisoa bakeng sa ho tsamaisetsa, 'me ka hona li a koaloa bakeng sa ho hlophisa (ho qoba liphetoho tse sa lebelloang). Penya habeli likonopo le li-slider ho li beha bohareng.

Ho fetola litšoantšo
Lienfelopo, LFOs, Key Zones, Key & Velocity Zones, Motion Sequence Lane Loop Start/End, le Master EQ li ka hlophisoa ka kotloloho litšoantšong tsa tsona tse fapaneng. Ho etsa sena:

1. Tsamaisa khesa holim'a setšoantšo ho bontša motšoaro o mebala (e ka ba letheba kapa mola).
2. Hula sebapi ho hlophisa boleng.

Bakeng sa Lienfelopo, ho na le maqhama a Curve bohareng ba likarolo tsa A/D/R.
Bakeng sa Libaka tsa Key & Velocity, khetha-hula ho hlophisa sebaka sa fade.

Ho khetha melumo
multi/poly e boloka tlaleho ea melumo, le likarolo tse ling tsa molumo ka bomong, ka ho sebelisa database. Sena se kenyelletsa Ts'ebetso, Mananeo, Tatelano ea Motion, Motion Sequence Lanes, Effects le Kaoss Physics Presets, Scales, Set Lists, le Wavetables.

Ho Editor/Laebrari, tsena li hlaha e le Bakhethoa:

Bakhethi

Sena se bontša ntho e khethiloeng hajoale. Sebelisa metsu ea < le > ho feta har'a eona ka bonngoe, kapa tobetsa lebitsong ho hlahisa fensetere ea sebatli (sheba "Sound Browser" leqepheng la 8).

Bohlokoa: metsu e feta har'a lethathamo la lintho ho latela tatellano ea fensetere ea "Sound Browser", 'me e sefshoa ka Likarolo, Likhokello, le mongolo oa ho batla. Mokhethi e mong le e mong o hopola litlhophiso tsena ha feela multi/poly e ntse e butsoe ntle le haeba ho khethiloe molumo o mocha oa motsoali (bakeng sa ex.ample, Tshebetso ke modumo wa motswadi wa Lenaneo). Haeba lintho tse ling li patiloe ka lebaka la Lihlopha, Lipokello, le mongolo o khethiloeng, letšoao la Filtered List le hlaha pakeng tsa < le > metsu. Ho hlakola lihloela le ho bonts'a lintho tsohle tse lethathamong, tobetsa letšoao la Lethathamo le Hlophisitsoeng. Ntle le moo, bula Sound Browser 'me u fetole lihloela kamoo u batlang. Ho fumana lintlha tse ling, sheba "Sound Browser" leqepheng la 8.

Bakeng sa Ts'ebetso feela, haeba Ts'ebetso e hlophisitsoe ho tsoa mofuteng oa eona o bolokiloeng, sena se bontšoa ke naleli "*" ka letsohong le letona la lebitso. Tobetsa aekhone ea Boloka ho hlahisa lebokose la Boloka; sheba “Ho Boloka Melumo,” ka tlase. Hlokomela hore sena ha se hlahe bakeng sa lintho tse ke keng tsa hlophisoa ka har'a mefuta e mengata, ho kenyeletsoa Wavetables le Scales. Tobetsa ka ho le letona / tlanya-control (macOS) lebitsong ho hlahisa menyu ea maemo. Bakeng sa lintho tse ngata, sena se kenyelletsa likhetho tsa ho boloka le ho reha bocha. Bakeng sa Mananeo le Tatelano ea Motion, e boetse e kenyelletsa Copy le Paste.

Sound Browser

Fetileview
Sound Browser e sebelisoa ho khetha mofuta ofe kapa ofe oa data ea molumo, joalo ka Ts'ebetso, Mananeo, Tatelano ea Motion, Motion Sequence Lanes, Wavetables, jj.

Li-Filters Panel
Likhetho tse mona li u thusa ho fokotsa palo ea lintho tse lethathamong la Lintlha. Beha Lipatlisiso, Likarolo, le/kapa Lipokello kamoo u batlang. Panel ea Filters e ka fetoloa boholo ka ho hula moeli oa eona o ka ho le letona, ho bonts'a kholomo e le 'ngoe, tse peli, kapa tse tharo tsa Lihlopha le Likhokello.

Bohlokoa: Litlhophiso tsa Patlisiso, Likarolo, le Likhokello li tsoela pele ho ama khetho ea data, le ka mor'a hore Sebatli sa Modumo se koetsoe. Mokhethi e mong le e mong oa molumo o hopola litlhophiso tsena hafeela multi/poly e ntse e butsoe ntle le haeba ho khethiloe molumo o mocha oa motsoali (bakeng sa ex.ample, Tshebetso ke modumo wa motswadi wa Lenaneo). Ho fumana lintlha tse ling, sheba “Bakhethoa” leqepheng la 7.

Lethathamo la Lintlha
Sena se bonts'a lenane la data e ka khethoang ea molumo (Lits'ebetso ho example ka holimo), joalo ka ha e hloekisitsoe ke Litlhophiso tsa Patlo, Sehlopha, le Pokello ho Panel ea Lisefe. Tobetsa nthong e lethathamong ho e khetha bakeng sa tlhahlobo, kapa sebelisa metsu ea keyboard ea holimo/tlaase ho sheba lintho ka bonngoe. Tobetsa lethathamong ebe o thaepa litlhaku tse seng kae ho khetha melumo ka mabitso. Penya habeli (kapa tobetsa OK) ho khetha le ho koala sebatli.

Litšiea tsa metadata
Bakeng sa ntho ka 'ngoe, lenane le bontša Lebitso, Pokello, Sehlopha, Mongoli, le Lintlha, hammoho le hore na ntho eo e notletsoe data ea feme kapa che. U ka hula litlhōrō tsa litšiea ho li hlophisa bocha, kapa ho fetola boholo ba litšiea. Tobetsa kholomong ea sehlooho ho hlophisa; tobetsa hape ho fetola tatellano ea ho hlopha. Letshwao la kgutlotharo le bontsha hore na ke kholomo efe e kgethetsweng ho hlopha, mme tsela ya kgutlotharo (hodimo kapa tlase) e bontsha tatellano ya ho hlopha.

Phanele ea Boitsebiso
Phanele ena e u lumella view metadata bakeng sa lintho tse khethiloeng, ho kenyelletsa Lebitso, Pokello, Sehlopha sa 1 & 2, Mongoli, le Lintlha. Phanele ea Mohlahlobi e ka fetoloa boholo ka ho hula moeli oa eona o letšehali.

OK / Hlakola
Tobetsa OK ho netefatsa khetho ebe o koala fensetere, kapa Hlakola ho khutlela khethong e fetileng.

Search
Ngola sebakeng sena ho sefa lenane ka ho batla mongolo sebakeng sefe kapa sefe sa metadata. Tobetsa ho "X" ho hlakola lebala.

Lihlopha
Likarolo li u lumella ho sefa ho latela mofuta oa molumo, joalo ka libase, li-lead, litloloko, joalo-joalo. Molumo o mong le o mong o ka arolelanoa Mahlopheng a mabeli, 'me mofuta o mong le o mong oa data-Ts'ebetso, Mananeo, joalo-joalo-o na le lethathamo la ona la Lihlopha. Tobetsa lebitsong la Sehlopha ho sefa ka Sehlopha seo; tobetsa "X" ho tlosa likhetho tsohle. Ha ho batloa ka Sehlopha, molumo o tla bontšoa haeba e 'ngoe ea Lihlopha tsa eona e lumellana le mokhoa oa ho batla.

Lipokello
Lipokello li u lumella ho hlopha melumo ka lihlopha, joalo ka melumo ea feme, liphutheloana tsa katoloso, kapa merero ea hau. Molumo o mong le o mong o ka abeloa ho Pokello e le 'ngoe. Tobetsa lebitsong la Pokello ho sefa ka Pokello eo; tlanya ho "X" ho tlosa likhetho tsohle tsa pokello.

Ho boloka Melumo

The Performance, ka Mekhahlelo ea eona e mene, ke mokhoa o ka sehloohong oa ho khetha, ho hlophisa, le ho boloka melumo. Ha o ntse o ka boloka Mananeo, Tatelano ea Motion, Motion Sequence Lane Presets, le Kaoss Physics and Effects Presets, ha ua tlameha ho etsa joalo: data eohle e teng ho Performance. Ka mokhoa o ts'oanang, ha o kenya e 'ngoe ea mefuta ena ea data ho Ts'ebetso, kopi e ncha ea data e etsoa ho Ts'ebetso. Liphetoho life kapa life li ama kopi ea lehae feela ka har'a Ts'ebetso, eseng data ea mantlha. Sena se o lumella ho hlophisa ka bolokolohi ntle le ho tšoenyeha ka ho ama melumo e meng.

Ho boloka molumo kapa ho seta esale pele:

1. Eya ho Sekhethi bakeng sa molumo kapa setaele. Ho fumana lintlha tse ling, sheba “Bakhethoa” leqepheng la 7.
2. Tobetsa konopo ea Boloka, kapa tobetsa ka ho le letona/control-tobetsa (macOS) lebitsong ho bula menyu ea maemo ebe u khetha Save taelo.
   Lebokose la Save le tla hlaha:
   Boloka puisano
3. Beha Lebitso, Sengoli, Pokello, le Lihlopha kamoo u batlang.
   U ka boela ua hlophisa metadata ena kaofela hamorao, u sebelisa fensetere ea Molaeborari.
   Bohlokoa: ho fetola lebitso ha ho etse kopi e ncha ea molumo ka bo eona! Kamehla sebelisa Save As New ha u batla ho etsa kopi.
4. Boloka molumo, ka ho sebelisa Overwrite kapa Save As New.

Ho hlakola molumo o teng, sebelisa Overwrite. Ho etsa kopi e ncha le ho siea molumo o teng o sa fetoha, sebelisa Save As New. Melumo ea fektheri e kanna ea sireletsoa, ​​e leng moo ho fumanehang feela "Save As New".

Ho reha mabitso bocha
Joalokaha ho hlalositsoe ka holimo, Lits'ebetso li boloka boitsebiso bohle bakeng sa Mananeo a bona, Motion Sequences, Motion Sequence Lanes, le Kaoss Physics and Effects Presets. Sena se boetse se kenyelletsa mabitso a likarolo tseo. Ka lebaka la sena, o ka reha e 'ngoe ea likarolo tsena ntle le ho li boloka ka thoko, ha feela o boloka Ts'ebetso e kentsoeng.

Ho etsa joalo:

1. Tobetsa ka ho le letona/tobetsa ho laola (macOS) lebitsong ebe u khetha Rename… taelo ho menu ea maemo.
2. Kgetha Rena hape.
3. Kenya lebitso le letjha, ebe o tobetsa OK ho netefatsa.
   Mabitso a ka ba bolelele ba litlhaku tse 24.
4. Etsa bonnete ba hore o boloka Tshebetso hang ha o qetile.

Kopitsa/Beha

U ka sebelisa kopi / peista ka:

• Mekhahlelo
• Mananeo
• LFOs
• Lienfelopo
• Sefe & Amp Key Track
• Li-processor tsa Mod
• Liphello tsa motho ka mong (Pre FX, Mod FX, Delay, Reverb, le Master EQ)
• Litlhophiso tsa Filter
• Litlhophiso tsa Arpeggiator

Bakeng sa mohlalaample, o ka kopitsa ho tloha LFO e 'ngoe ho ea ho e' ngoe ka Lenaneo le ts'oanang, kapa u kopitse litlhophiso tsa Filter ho tloha Leareng le leng ho ea ho le leng.

Ho sebelisa kopo le ho peista le efe kapa efe ea tse ka holimo:

1. Tobetsa ka ho le letona (kapa u tobetse ho MacOS) sehloohong sa karolo eo u ka ratang ho e kopitsa, joalo ka Pitch LFO, Arpeggiator, kapa Mod processor 2.
   Ho tla hlaha lenane la maemo.
2. Khetha Kopitsa ho tsoa ho menu ea maemo.
3. Tobetsa ka ho le letona (kapa tlanya-taolo ho MacOS) sehloohong sa karolo eo u ka ratang ho Beha ho eona. Hlokomela hore sena se tlameha ho ba mofuta o tšoanang le mohloli oa kopi; mohlala, u ke ke ua kopitsa LFO ho Enfelopo.
4. Khetha Peista ho tsoa ho menu ea maemo.

Kopitsa/Beha mehato ea Tatelano ea Motion
Mehato ea Tatelano ea Motion e tšehetsa Kopitsa le ho Peista, hammoho le Seha, Kenya Pele, Kenya Ka morao, 'me u Hlakole. Tobetsa ho Shift ho khetha letoto la Mehato, kapa khetha lintho tse ngata tse sa tsoeleng pele ka ho tšoara konopo ea taelo ho MacOS, kapa konopo ea Ctrl ho Windows. Ha u se u khethile mehato eo u e batlang, tlanya ka ho le letona (kapa tlanya taolo ho MacOS) ho hlahisa menyu ea maemo ebe u khetha ts'ebetso eo u e batlang ea kopi / peista.

Haeba u sehile kapa u qopisitse mehato e mengata, ebe u khetha mefuta e mengata ea mehato e le sebaka sa Peista, tse latelang li tla etsahala:

• Haeba mohato o le mong o khethiloe, mehato e tla behoa ho qala mohatong oo, ebe o khutlisetsa mehato e mengata kamoo ho hlokahalang ho latela mohato oo.
• Haeba u khethile mehato e ts'oanang hantle le e hlahang ho clipboard, le haeba e sa tloaeleha, Peista e tla nka sebaka sa mehato e khethiloeng feela.
• Haeba u khethile mehato e fokolang ho feta e letlapeng la clipboard, le haeba e sa tloaeleha, Peista e tla nkela mehato e khethiloeng sebaka, ebe e khutlisetsa mehato e mengata kamoo ho hlokahalang ho latela mohato oa ho qetela o khethiloeng.
• Haeba u khethile mehato e mengata ho feta e letlapeng la clipboard, Peista e tla nkela mehato e khethiloeng sebaka ka loop ea clip-board, e eme mohatong oa ho qetela o khethiloeng.

Haeba u khetha letoto la mehato joalo ka Kenya Pele kapa Kenya Kamora moo u eang, ke mohato oa pele feela kapa oa ho qetela o bohlokoa. Kenya Pele e bolela mohato oa pele o khethiloeng, 'me Insert After e bolela mohato oa ho qetela o khethiloeng.

Motion Sequence editing

Mohlahlobi oa Tatelano ea Motion
Sebaka sena se bonts'a lintlha tsa Lane kapa Mohato o khethiloeng hajoale.
Ho hlophisa liparamente tsa Lane, tobetsa sehlooho sa Lane. Ho fetola mehato ea mehato, tobetsa Mohato.

Ho fetola palo ea mehato e bontšitsoeng
Sebelisa likonopo tsa mehato ea 16/32/64 ho lokisa boemo viewmefuta e fapaneng ea ponts'o, ho bonts'a mehato e 16, 32, kapa 64 ka ho latellana.

Ho hlophisa mehato ea ho Qala, Qetello, le Loop
Li-triangles tse ka holimo ho Mehato li bontša Loop Start (e tala) le Loop End (e khubelu). Ho edita, feela tobetsa le hula holim'a likhutlotharo.

Ho hlophisa litekanyetso ho Grafiken ea Mohato
Bakeng sa litselana tsa Pitch le Step Sequence, hammoho le Tsela ea Nako ha Tempo e tima, hula Mehato ho setšoantšo ho hlophisa Transpose, Boleng ba Mohato, kapa Nako, ka ho latellana. Bakeng sa Tsela ea Shape, hammoho le Tsela ea Nako ha Tempo e buletsoe, tobetsa 'me u hatelle ho hlahisa menu ea popup ho khetha boleng ba Shape kapa lintlha, ka ho latellana.

Mohato oa Solo
Mokhoa o le mong oa mohato o etsa hore Lane e tsamaee ka nakoana mohatong o khethiloeng, bakeng sa libopeho tsa tlhahlobo, ho rarolla mathata, joalo-joalo.

Ho kenya mokhoa oa Step Solo:

1. Tobetsa ka ho le letona kapa u tobetse ho laola (macOS) ho Mohato ho hlahisa menyu ea maemo.
2. Khetha taelo ea Solo Step.

Mohato o tla tšoauoa ka kemiso e mosehla. The Motion Sequence e tla bapala joalokaha eka Lane eo e ne e behiloe hore e kene ka Mohato o khethiloeng. Litsela tse ling li tla tsoelapele ho bapala ka mokhoa o tloaelehileng. Haeba u khetha Mehato e meng ho Lane ea hajoale, motho a le mong o tla latela Mohato o khethiloeng. Ho tsoa ka mokhoa oa Step Solo, hlahisa menyu ea maemo 'me u se ke oa khetha Mohato oa Solo.
Ke Lane e le 'ngoe feela ka nako e ka bang ka mokhoa oa Step Solo. Haeba u kenya mokhoa oa Step Solo bakeng sa Lane ea bobeli, mokhoa oa pele oa Lane's Step Solo o tingoa ka bohona. Ho fetohela ho Layer e fapaneng ho boetse ho tima mokhoa oa Step Solo.

Ho feto-fetoha ha molumo oa lentsoe

Mohlophisi o bonts'a boleng bo fetotsoeng ka nako ea 'nete joalo ka matheba a lamunu holim'a likotola le li-slider. Haeba parameter e bonts'oa feela e le mongolo kapa lebokose la linomoro, 'me le fetotsoe, mongolo o bonts'oa ka lamunu.

Mohlahlobi oa ho feto-fetoha ha molumo
Mohlahlobi oa ho feto-fetoha ka holimo ka letsohong le letona o bontša mekhoa ea ho feto-fetoha ha molumo, haeba e teng, bakeng sa parameter e khethiloeng (e tšoailoeng ka lebokose la lamunu). U ka boela ua kenya li-modulation tse ncha kapa ua hlakola tse seng li ntse li le teng.

Hula le ho theola mekhoa ea ho feto-fetoha ha molumo

Ho theha mokhoa oa ho feto-fetoha o sebelisa hula le ho theola:

1. Tobetsa lebitsong la tse ling tsa tse latelang: Mod kapa Pitch wheel, Mod Knobs, Kaoss Physics, Kaoss Physics, Envelopes, LFOs, Key Tracks, Seq A/B/C/D, kapa Mod processors.
   Bakeng sa Mod Knobs le mabili ka ho khetheha, etsa bonnete ba hore o tobetsa lebitsong, eseng taolo kapa pontšo ea boleng!
2. Hulela sebakeng sa modulo.

Ho fetola mohloli o mong oa mod le o mong
U ka boela oa hula-le-ho theola ho fetola mohloli o mong oa mod le o mong.

Ho theha mofuta ona oa litsela ka ho hula le ho theola:

1. Tobetsa lebitsong la mohloli oa mod, joalo ka holimo.
2. Hula 'me u tšoare ka holim'a tab bakeng sa moo u batlang ho feto-fetoha.
   Bakeng sa mohlalaample, ho fetola Pitch LFO, tšoara holim'a tabo ea LFOs.
   Ka mor'a nakoana, tab ya tla bula.
3. Hang ha tab e bula le ho hlahisa likahare tsa eona, hula ho ea moo u batlang ho ea teng.

Litsela tse tsitsitseng tsa modulation
Litsela tse tsitsitseng tsa modulation, joalo ka Amp LFO ho Amp Boemo, bo bontšoa ho Mod Inspector. Litsela tsena li tšoauoa ka letšoao la senotlolo, 'me li fapane le mekhoa ea ho feto-fetoha ha mosebedisi ka litsela tse' maloa: li ke ke tsa hlakoloa, mohloli oa mod o ke ke oa fetoloa, 'me ha ho na mohloli oa bobeli oa modulation.

Liphello

U sebelisa Editor, u ka fetola li-parameter tsa liphello tse ka hare 'me u boloke Li-Presets Presets. Tobetsa konopo ea EDIT haufi le lebitso la phello ho bonts'a lenane le felletseng la litlamorao.

Ho feto-fetoha ha maemo a ka hare ho lumelloa feela ho tsoa ho FX Edit 1/2/3 likonopo. Ho fetola litlamorao ho tsoa mehloling e meng, joalo ka Mod Wheel kapa Mod Knobs, abela paramethara e ka hare ho e 'ngoe ea likonopo tsa FX Edita, ebe o fetola konopo ea FX Edita mohloling o lakatsehang.

Ho Sebelisa Laeborari

Ho romela kantle ho naha
Ho kenya le ho romela kantle ho naha ho o lumella ho fetisa data lipakeng tsa multi/poly le komporo. Sena se o lumella ho kenya melumo e mecha, ho fetisa melumo ho tloha ho mefuta e mengata ho ea ho e 'ngoe, kapa ho boloka le ho khutlisetsa data e itseng. Bakeng sa ho tšehetsa litaba tsohle tsa multi/poly, sheba "bekapo le ho busetsa" leqepheng la 16.

Bohlokoa: etsa bonnete ba hore u bala "Nahana ka Mohlophisi/Mohlokomeli oa libuka e le pontšo ea kantle bakeng sa mefuta e mengata" leqepheng la 3.

Ho kenya data

Ho kenya data ho tsoa komporong ea hau ho ea ho multi/poly:

1. Ho File menu, khetha taelo ea Import….
   Tekanyetso file bula puisano e tla hlaha.
2. Khetha mefuta e mengata / e mengata file(s) ho reka kantle ho naha.
   O ka khetha le ho kenya tse ngata files hang-hang.
3. Tobetsa konopo ea Open.
   Lintlha tse fumanehang ho file(s) e tla kenngoa ka har'a mefuta e mengata. Ho tla hlaha molaetsa o netefatsang thomelo, ho kenyeletswa le tlhahisoleseding mabapi le hore na files li ekelitsoe.

Likhohlano tsa data
Haeba tse ling tsa data tse tsoang kantle li bonahala li fapane kapa li nchafalitsoe tsa data ea kahare, puisano e tla hlaha ka mongolo:
"Ntho e fapaneng kapa e fetotsoeng e se e ntse e le teng ka har'a database ea ”

Puisano e fana ka likhetho tse 'maloa:

• Hlakola: ntho e ke ke ea romelloa kantle ho naha.
• Ngola: ntho eo e tla romelloa kantle ho naha, e nkela mofuta oa mofuta oa multi/poly.
• Etsa e Ikhetha: ntho e tla rekoa, 'me UUID ea eona (bona "UUIDs" leqepheng la 14) e tla fetoloa e le hore e se ke ea loantšana le phetolelo e seng e ntse e le ka bongata / poly.
• Etsa kopo ho Bohle: khetho ea Hlakola, Ngola, 'me U Ikhetha e tla sebelisoa ho tsohle tse hanyetsanang. files ho Import.

Haeba Set List e romelloa kantle ho naha, 'me tse ling tsa Lits'ebetso tsa eona li entsoe tse ikhethang, joale Set List e tla hlophisoa ho supa Lits'ebetso tse ncha.

Li-UUIDs
Multi/poly e sebelisa polokelo ea litaba ho boloka melumo e hlophisehile. Ka hare, melumo ha e tsejoe ka mabitso a eona, empa ho e-na le hoo ka e ikhethang tag khomaretse ho file, e bitsoang UUID (“Universal Unique Identifier”). Sena se bolela hore leha lebitso la molumo le fetotsoe, sistimi e ntse e tseba hore ke molumo o tšoanang. Ha u ngola molumo ho tsoa ho phanele e ka pele ea mefuta e mengata, "Ngola" e boloka UUID e tšoana, 'me "Save As New" e theha UUID e ncha. Ha o kenya data kantle ho naha, li-UUID tse melumong e tlang ho romelloa li bapisoa le tse seng li ntse li le polokelong ea litaba. Haeba molumo o na le UUID e tšoanang, empa likahare tsa eona li fapane, u tla bona puisano e hlalositsoeng tlas'a "Likhohlano tsa data" leqepheng la 14.

Ho romela data
Ha u romela likotoana tse peli kapa ho feta tsa data, u ka li boloka e le tse arohaneng files kapa joalo ka Bundle e le 'ngoe file.

Ho romela kantle ho naha ka thoko files

Ho romella data ho tsoa ho mefuta e mengata ho ea komporong ea hau e le ka thoko files ho disk:

1. Ka Window e kholo, khetha data eo u ka ratang ho e romella. Ho fumana lintlha tse ling, sheba “Lenane le khetho” leqepheng la 22.
2. Ho File menu, khetha taelo ea Export….
   Tekanyetso file bula puisano e tla hlaha.
3. Tsamaea sebakeng sa ho boloka files.
4. Tobetsa Open ho khetha bukana ea hajoale ebe u e boloka files.

Ho romela kantle ho naha joalo ka bongata

Ho romella likotoana tse ngata tsa data ho tloha ho multi/poly ho ea komporong ea hau joalo ka bongata:

1. Ka Window e kholo, khetha data eo u ka ratang ho e romella.
2. Ho File menu, khetha Export Bundle… taelo.
3. Tsamaea sebakeng ho boloka bongata, 'me u kenye lebitso bakeng sa file.
4. Tobetsa Boloka ho boloka bongata file.

E romella data eohle ea mosebelisi

Ho romella lintlha tsohle tsa hau tsa moetlo joalo ka bongata bo le bong file, ntle le ho boloka melumo ea fektheri e sirelelitsoeng ka mongolo:

1. Ho menu, khetha "Export Bundle of All User Sounds…" taelo.
2. Tsamaea sebakeng ho boloka bongata, 'me u kenye lebitso bakeng sa file.
3. Tobetsa Boloka ho boloka bongata file.

Sena se romela bongata ba lintlha tsohle tse sa sireletsoang, bakeng sa ho boloka kapa ho fetisa melumo eohle ea hau ka nako e le 'ngoe.

Ho kenya le ho romela kantle ho Set Lists
Setha Manane a bua ka 64 Performances. Ha o romela Lethathamo la Set, ka bobeli Set List le Litšebetso tsa lona tse boletsoeng li bolokoa hammoho. Sena se etsa hore ho be bonolo ho fetisetsa lihlopha tsa melumo lipakeng tsa li-multi/poly tse peli kapa ho feta.

File Mefuta
Multi/poly Editor/Laebrari o sebelisa file mefuta e ka tlase.

Mofuta	Katoloso	Litaba
Tshebetso	mpperf	Ntho e le 'ngoe ea mofuta o boletsoeng.
Lenaneo	mpprog
Wavetable	korgwavetable
Kaoss Fiziks	mpkphysics
Sekala	korgscale
Tatelano ya Motion	mpmotionseq
Master Lane	mpmasterln
Lane ea Nako	mptimingln
Pitch Lane	mppitchln
Shape Lane	mpshapeln
Mohato oa Seq Lane	mpstepseqln
Phello	mpeffect
Beha Lethathamo	mpsetlist	Lethathamo le le leng la Set le Lits'ebetso tsohle tsa lona tse boletsoeng
Sephutheloana	mpbundle	Lintho tse ngata tsa mofuta ofe kapa ofe.
Boloka	mpbackup	Likahare kaofela tsa multi/poly.

Ho kenya Wavetables
Modwave le multi/poly ka bobeli li sebelisa “.korgwavetable” files, kahoo o ka arolelana li-wavetable habonolo lipakeng tsa lisebelisoa tse peli. U ka boela ua kenya Wavetables ka mekhoa e 'meli e tloaelehileng. Mefuta ka bobeli e lokiselitsoe ka ho khetheha .wav files, e nang le mefuta e fihlang ho 64 ea maqhubu a motho ka mong a behiloeng ho isa qetellong, hang ka mor'a e 'ngoe. E 'ngoe le e 'ngoe ea mefuta ea maqhubu e tlameha ho lekana hantle ka bolelele.

Liforomo tse peli tse tšehelitsoeng ke:

• Lintlha tsa lintlha tse 32-bit tse phaphametseng, tse nang le waveforms hantle 2048 sampnako e telele (e sebelisoang hangata ke li-software synthesizer, joalo ka Serum)
• 16-bit linear data, le waveforms hantle 256 samples long (hangata e sebelisoa ke modular synth hardware)

Phapang e kholo lipakeng tsa lifomate tse peli ke hore 2048-sample waveforms li lumella li-octave tse ling tse tharo tsa li-harmonics tse phahameng. Ha e le hantle, sena se bolela hore lintlha tsa bass li ka khanya haholoanyane ka timbre.

Bohlokoa: .wav files e tlameha ho ba ka har'a e 'ngoe ea lifomate tse peli tse ts'ehetsoeng tsa wavetable, joalo ka ha ho hlalositsoe ka holimo. Mantswe a tlwaelehileng files, joalo ka lirekoto tsa lisebelisoa, li ke ke tsa fetoloa ka bo eona hore e be li-wavetables.

Ho kenya Wavetables ka mefuta e fetang 64 ea maqhubu
Li-multi/poly, joalo ka li-synths tse ling tse ngata tsa wavetable, li fapanyetsana lipakeng tsa maqhubu ka nako ea nnete. Software e 'ngoe e tsebahalang ea wavetable e sebelisa mokhoa o fapaneng; sebakeng sa ho putlama, ba theha letoto la li-waveforms tse mahareng ebe ba fetoha lipakeng tsa tsona. Haeba liphapang lipakeng tsa maqhubu a mahareng li le nyane, li utloahala li le haufi ka ho lekana. Ho fetola lipakeng tsa maqhubu a mabeli, ba ka etsa Wavetable ka sebopeho sa pele sa maqhubu qalong, maqhubu a mahareng a 254, ebe qetellong ea bobeli qetellong.

Ho fetola sena hantle lipakeng tsa mefuta e fapaneng ea 64, ba ne ba tla hloka ho etsa litafole tse mahareng tse fetang likete tse leshome le metso e tšeletseng! Ka lehlakoreng le leng, mefuta e mengata / poly, e hloka feela li-waveforms tsa pele tse 64 ho etsa hore ho be le tsela e boreleli, e se nang mehato. Sena se hopoloa ha o reka li-wavetable. Haeba 32-bit/2048-sample wavetable e na le maqhubu a fetang 64, bongata / poly e tla nka hore ke motsoako o hlahisitsoeng ebe o theola tse ling tsa maqhubu a mahareng ho theha mofuta oa 64-waveform.

Ho theha le ho hlophisa Wavetables
Bakeng sa ho theha le ho hlophisa Wavetables ea hau, re khothaletsa ho sebelisa WaveEdit. WaveEdit ke mahala, 'me e fumaneha bakeng sa MacOS, Windows le Linux. Bona www.korg.com bakeng sa sehokelo sa mofuta oa WaveEdit e ntlafalitsoeng ka ho khetheha bakeng sa modwave le multi/poly, mme e ka theha Wavetables ho 32-bit/2048-s.ample sebopeho.
Mohlophisi/Molaeborari a ka romella li-Wavetables tse ngata / tse ngata, joalo ka Ts'ebetso, Mananeo, joalo-joalo. Leha ho le joalo, li-Wavetables tse romelloang kantle ha li khone ho hlophisoa.

Sebakeng seo, ho etsa liphetoho ho li-Wavetables tse neng li rekisitsoe kantle ho naha:

1. Bula mohloli file ho sesebelisoa sa hau sa ho hlophisa sa Wavetable.
2. Fetola Wavetable kamoo u batlang.
3. Boloka liphetho ho .wav e ncha file, ho sebelisa lebitso le tšoanang le la Wavetable polokelong ea litaba tse ngata/poly. Ho sebelisa lebitso le tšoanang ho bohlokoa; sheba “Likopi le file mabitso,” ka tlase.
4. Ho Multi/poly Editor/Laeborari, Reka .wav file joalo ka Wavetable.
5. Ha u khothalletsoa, ​​​​khetha ho khutlisa Wavetable e teng.
   Sena se tla nchafatsa melumo efe kapa efe e teng ho sebelisa mofuta o mocha.

Likopi le file mabitso
.wav-format Wavetables ha e na li-UUID tse ngata/poly ho fihlela ka mor'a hore li kenngoe ka har'a database (sheba “UUIDs” leqepheng la 14). Kahoo, ho sheba hore na ho na le likopi files, bongata/poly e sebelisa lebitso la .wav file ka disk. Haeba o kenya .wav-format Wavetable file, 'me e na le lebitso le tšoanang le la Wavetable e seng e ntse e le polokelong ea lintho tse ngata/poly, Editor/Labrarian e tla botsa hore na u batla ho hlakola Wavetable e teng, kapa u etse Wavetable e ncha, e ikhethang.

Boloka le ho khutlisetsa

E boloka data eohle

1. Ho File menu, khetha bekapo… taelo.
   Fesetere e kholo e tla fetoha ho bonts'a fensetere ea Backup.
2. Kenya lintlha tse hlalosang ka bokhutšoanyane.
3. Tobetsa Qala ho qala bekapo, kapa Hlakola ho khutlela Fesetereng e kholo.
   Sebaka sa tsoelo-pele se bontša boemo ba bekapo, 'me molaetsa o hlaha ha bekapo e felile.
4. Tobetsa konopo e Etsoeng ho khutlela Fensetereng e ka Sehloohong.

Ho khutlisetsa data

Bohlokoa: Ho khutlisa ho tsoa ho "backup" ho tla hlakola data eohle eo hajoale e leng ho multi/poly. Haeba karolo e nyane ea mefuta ea data e khethiloe nakong ea ho khutlisa, ke data feela ea mefuta e khethiloeng e tla hlakoloa.

1. Ho File menu, kgetha ya Khutlisa… taelo.
   Tekanyetso file bula puisano e tla hlaha.
2. Khetha bekapo e mengata/e mengata file ho sebedisoa bakeng sa ho tsosolosa.
   Window e kholo e tla fetoha ho bonts'a puisano ea ho tsosolosa. Sena se bonts'a mongolo oa mongolo o bolokiloeng le file, 'me e kenyelletsa letoto la li-check-box ho khetha mefuta ea data e tla khutlisoa. Ka kamehla, mefuta eohle ea data e khethoa ntle le ho Calibration Data.
   Bohlokoa: Khetha feela Calibration Data ha u khutlisetsa ho sesebelisoa se ts'oanang se entseng backup. Ho seng joalo, e tlohele e sa hlahlojoa.
3. Haeba o lakatsa, khetha mefuta ea data ho e khutlisa.
4. Tobetsa Qala ho qala ho tsosolosa, kapa Hlakola ho khutlela Fensetereng e kholo.
   Sebaka sa tsoelo-pele se bontša boemo ba ho tsosolosa, 'me molaetsa o tla hlaha ha tsosoloso e felile.

Keletso: Ho kopanya data
Haeba u batla ho kopanya boemo ba hau ba hajoale le boemo ba pele, sebelisa Export and Import. Haeba u na le backup file 'me u batla ho e kopanya le boemo ba hau ba hona joale, pele Romella data eohle, ebe u khutlisetsa ho tsoa ho bekapo, ebe u Kenya hape data.

Editing Set Lists

Ka Mohlophisi/Mohlokomeli oa libuka, u ka:

• Manane a Sete a Likopi
• Eketsa Lits'ebetso ho Seta Manane ka ho hula le ho theola
• Hlophisa hape, seha, kopitsa, 'me u hlakole Li-Slots ho Lethathamo le Behiloeng
• Kopitsa ho tloha Lethathamong le le leng ho ea ho le leng

Ho kopitsa Manane a Sete

Ho etsisa Set List:

1. Fesetereng e ka Sehloohong, khetha Lethathamo le le leng kapa ho feta.
   Ho ka 'na ha thusa ho khetha "Set Lists" tab pele, e le hore ho bonts'itsoe feela Set Lists. Ho fumana lintlha tse ling, sheba "Main Window" leqepheng la 21.
2. Ho menu ea Edit, khetha taelo ea Duplicate.

U ka boela ua tobetsa ka ho le letona ho Lethathamo la Set ho Fensetere e kholo 'me u sebelise menu ea maemo.
Lethathamo le khethiloeng la Set (ma) le tla kopitsoa, ​​'me nomoro e kenyellelitsoe mabitsong a bona.

Ho Eketsa Lits'ebetso ho Lethathamo la Set

Ho kenyelletsa Performances lethathamong le behiloeng:

1. Bula fensetere ea Set List.
   Ka li-setting tsa Likhetho tsa kamehla, u ka bula fensetere ka ho penya habeli Lethathamo la Set ho Fesetere e kholo. Ho fumana lintlha tse ling, sheba “Likhetho” leqepheng la 25.
2. Khetha e le 'ngoe kapa tse ngata ho Fensetere e kholo.
3. Tobetsa 'me u tšoare Performance e khethiloeng, 'me u e hule holim'a Slot fensetereng ea Set List.
   Tshebetso e tla fetisetsoa holim'a Slot. Haeba u hula Lits'ebetso tse ngata, li tla beoa holim'a Slot le Slots hang-hang, ha ho hlokahala.

Ho hlophisa bocha Slots lethathamong le behiloeng, kapa ho kopitsa ho tloha Lethathamong le le leng ho ea ho le leng

U ka boela ua hlophisa li-Slots ho Lethathamo la Sete, joalo ka ho sebelisa sehiloeng, kopitsa, ho peista le ho kenya, u sebelisa mekhoa e meraro e fapaneng:

• Litaelo ho menu ea Edita
• Litaelo ho li-menu tsa maemo a pop-up (tobetsa ka ho le letona, kapa tobetsa ho laola ho MacOS)
• Hula-o theohe

U ka bula lifensetere tse ngata tsa Set List hang-hang. Haeba e 'ngoe ea lifensetere e bonts'a Lethathamo la Setha le khethiloeng hajoale ho li-multi / poly, lengolo "(Active)" le hlaha ka mor'a lebitso la lona bareng ea sehlooho.

Ho sebelisa litaelo ho menu ea Edita kapa menyu ea maemo

Ho hlophisa bocha Slots u sebelisa menyu ea Edita:

1. Khetha Li-Slots tseo u ka ratang ho li kopitsa, ho li khaola, kapa ho li hlakola.
   U ka khetha li-Slots tse peli kapa ho feta tse sa tsoeleng pele u sebelisa ho tobetsa-taelo ho MacOS, kapa Ctrl-tobetsa ho Windows. Ntle le moo, khetha mefuta e tsoelang pele ea Slots ka ho tobetsa Shift.
2. Khetha ea Cut, Cut and Shift Slots, Copy, or Delete command, joalo ka ha u batla.
   U ka khetha litaelo ho tsoa ho menu ea Edita, kapa u hlahise menu ea maemo ka ho tobetsa ka ho le letona / ho laola ho e 'ngoe ea Li-Slots tse khethiloeng. Bakeng sa lintlha tse mabapi le hore na tsena li sebetsa joang, haholo-holo Cut and Shift Slots, sheba "Edit menu" leqepheng la 26.
   Haeba u hlakola Slot, likahare tsa eona li nkeloa sebaka ke Init Performance.
   Haeba u sebelisa Peista kapa Kenya Pele, tsoela pele:
3. Khetha Slot ea moo u eang teng.
   Bohlokoa: haeba ho khethiloe Li-Slots tse ngata, khetho ea linomoro tse tlase feela e ama ts'ebetso ea Peista kapa Kenya Pele; likhetho tse ling li hlokomolohuoa. Bakeng sa tlhahisoleseding e eketsehileng, sheba “Beha” leqepheng la 26 le “Kenya Pele” leqepheng la 27.
4. Kgetha taelo ya Peista kapa Kenya Pele, kamoo o batlang.

Ho sebedisa ho hula le ho theola

Ho hlophisa bocha Slots ka ho hula le ho theola:

1. Khetha Li-slots tseo u ka ratang ho li kopitsa kapa ho li khaola.
2. Tobetsa 'me u hule holim'a Sekoti ho Peista, kapa sebakeng se pakeng tsa Slots ho Kenya Pele.
   Phello ho Slots ea mantlha e ipapisitse le hore na u ts'oara konopo ea Option (MacOS) kapa Alt key (Windows), le hore na u hula ka har'a Lethathamo le le leng la Sete kapa ho tloha Lethathamong le le leng ho ea ho le leng, joalo ka ha ho bontšitsoe tafoleng e ka tlase.

Sebaka	Hula ketso	Fetola ketso	E ama ho Ea mantlha Slots
Same Set List	Ka holim'a Sekotjana	Beha	Fetotse ho Init Tshebetso
	Ka holim'a Slot, u tšoere Option/Alt	Beha	Lula u sa fetoha
	Pakeng tsa Slots	Kenya Pele	E tlositsoe, joalo ka Cut and Shift Slots
	Pakeng tsa Slots, ho tšoara Option/Alt	Kenya Pele	E sala, e theohile le libaka tse ling tsa Slots
Fapaneng Setha List	Ka holim'a Sekotjana	Beha	Libaka tsa pele li lula li sa fetohe
	Pakeng tsa Slots	Kenya Pele

Hlokomela hore ho hulela ho Set List e fapaneng kamehla ho siea Slots ea mantlha e tiile; khetho-hula ha e hlokehe.

Editing Scales

Ho fetola Sekala:

1. Eya ho fensetere ya Laeborari.
2. Beha LIHLOOHO (kaholimo ho phanele e ka letsohong le letšehali) ho Sekala.
   Karolo e kholo ea fensetere e tla fetoha ho bonts'a Sekala se kentsoeng.
3. Tobetsa habeli Sekala se sa notleloang, kapa tobetsa ka ho le letona Sekala se sa notleloang ebe u khetha Open Scale Editor ho tsoa ho menu ea maemo.
   Ke Likarolo tsa mosebelisi tse sa notleloang feela tse ka hlophisoang. Ho theha mofuta o lokisehang oa sekala se notletsoeng, sa feme, tobetsa ka ho le letona ho Sekala ebe u khetha Duplicate ho tsoa ho menu ea maemo.
4. Fetola sekala kamoo o lakatsang kateng; sheba "Scale setting," ka tlase.
5. Tobetsa Boloka ho boloka sekala se hlophisitsoeng, kapa Hlakola ho tsoa le ho lahla liphetoho.

Bohlokoa: Boloka kamehla e hlakola data e teng ea Scale, leha o ka fetola lebitso. Ho theha Sekala se secha, sebelisa taelo ea Duplicate pele, ebe u hlophisa sekala se secha.

Likala li bolokiloe ka "korgscale" extension, 'me li ka arolelanoa pakeng tsa wavestate, modwave, le multi / poly.

Fetola Sekala

Litlhophiso tsa sekala

Tekanyo Lebitso
[Mongolo]
Sena se o dumella ho hlophisa lebitso la Sekala.

Bohlokoa: Boloka e hlakola data e teng ea Scale, leha o ka fetola lebitso!

Mofuta
[Sekala sa Octave, Scale ea Octave, A=Master Tune, 128 Note Scale]

Ho na le mefuta e meraro ea sekala se tšehetsoeng:
Octave Scale ke sekala se tloaelehileng sa lintlha tse 12 se phetang octave e 'ngoe le e 'ngoe.
Sekala sa Octave, A=Master Tune e tšoana le e ka holimo, ntle le hore Sekala se lokisoa ka bohona e le hore molumo oa A o tsamaellane le maemo a Master Tune (mohlala, A=440Hz), ho sa natsoe Senotlolo sa Sekala.
128 Note Scale e lumella tokiso e arohaneng ea noto e 'ngoe le e 'ngoe ea MIDI, bakeng sa Likala tse sa pheteng meeli ea octave.

Lisente
[–100…+100]
Noto ka 'ngoe e ka fokotsoa ka lisente tse 100, e bataletse kapa e bohale.

Li-semitones
[–127…+127]
Paramethara ea Semitones e u lumella ho hlophisa lintlha ho fihla ho mefuta eohle ea MIDI. Joalo ka mohlala o bonoloample, ho etsa hore senotlolo sa C se bapale molumo oa D, beha Semitone ho +2. Sena se bohlokoa bakeng sa likala tse sa pheteng meeding ea octave, kapa bakeng sa lintlha tse pheta-phetoang ka har'a sekala sa octave.

Ho hlophisa Litlhophiso tsa Global UTILITY

Fetileview
Mohlophisi/Mohlokomeli a ka hlophisa boholo ba litlhophiso tse fumanehang tlasa konopo ea UTILITY. (Litlhophiso tsa USB Network ke mokhelo.)

Ho etsa joalo:

1. Khetha Global UTILITY Settings… taelo ho Edit menu.
   Fesetere ea Global UTILITY Settings e tla buleha, joalo ka ha ho bonts'itsoe ka tlase.
2. Fetola li-setting kamoo u batlang.
   Bakeng sa lintlha tse mabapi le litlhophiso, ka kopo bona Bukana ea Mong'a mefuta e mengata.
3. Ha o qetile, tobetsa konopo e koalang (“X”) hukung e kaholimo ho le letona.

Bohlokoa: Liphetoho lifensetereng tsena li etsahala hang-hang; ha ho na konopo ea Hlakola. Leha ho le joalo, u ka sebelisa Reset All To Defaults ha ho hlokahala.

Ho Khutlisa Li-Defaults

Khutlisa Tsohle ho Li-Defaults...
Konopo ena e hukung e ka tlase ho le letšehali ea fensetere. E o lumella ho khutlisetsa litlhophiso tsohle tlasa konopo ea UTILITY, joalo ka likabelo tsa MIDI CC, ho li-feme tsa bona tsa feme. Ho tobetsa konopo ho hlahisa puisano ea netefatso. Tobetsa OK ho khutlisetsa li-setting tsa kamehla, kapa Hlakola ho tsoa.

Global UTILITY Settings

Windows

Karolo ena e fana ka tlhaloso e khuts'oane ea li-skrini tsa Multi/poly Editor/Laebrari le mesebetsi ea tsona.

Fesetere e kholo
Ena ke fensetere e bohareng bakeng sa Multi/poly Editor/Laebrari. E na le linaha tse peli tsa mantlha, tse laoloang ke likonopo tse kaholimo ho le letona: Mohlophisi le Ralibuka.

Mohlokomeli oa libuka
Sena se bonts'a manane a data eohle ho multi/poly e hokahantsoeng.

Ts'ebetso ea hajoale
Sena se bonts'a Ts'ebetso e sebetsang hajoale ho multi/poly e hokahantsoeng. Sena se tla ntlafatsa haeba o fetola Ts'ebetso ho mefuta e mengata, kapa ha o khetha Ts'ebetso o sebelisa Mohlophisi/Molaeborari. Ho fumana lintlha tse ling, sheba "Khetho ea Ts'ebetso" leqepheng la 25.

LIBRARIAN le likonopo tsa EDITOR
Likonopo tse ka holimo ka letsohong le letona la fensetere e kholo li khetha hore na u sebetsa le Mohlophisi kapa Ralibuka.

Tšimo ea ho Batla
Sena se sefa lenane ka ho batla mongolo karolong efe kapa efe ea metadata.

Li-icon tsa notlela: data ea feme e sirelelitsoe ka mongolo
Lintlha tsohle tse rometsoeng ho tsoa fekthering li sirelelitsoe ka mokhoa o ngotseng, ho kenyeletsoa Ts'ebetso, Mananeo, li-presets tsa Effects, joalo-joalo. Sena se bontšoa ke li-aekhone tsa senotlolo lenaneng le ka holimo ho phanele ea Mohlahlobi. Melumo ea fektheri e ke ke ea hlakoloa, 'me liphetolelo tsa bona tsa mantlha li ke ke tsa fetoloa, ho kenyeletsoa metadata joalo ka lebitso, sengoli joalo-joalo. Leha ho le joalo, u ka li kopitsa ebe u li hlophisa kamoo u ka ratang kateng.

Menyu ea Mofuta oa data
Lethathamo le ka bonts'a li-Performances, Programs, Wavetables, Kaoss Physics presets, Motion Sequences, Motion Sequence Lane presets, Scales, Effects presets, le Set Lists ho multi/poly e hokahantsoeng. Lenane lena le khetha hore na ke mefuta efe ea data e bontšitsoeng lenaneng. All Data bontša mefuta eohle ea data hang-hang.

Litšiea tsa metadata
Bakeng sa ntho ka 'ngoe, lethathamo le bontša Mofuta, Lebitso, Pokello, Sehlopha, Mongoli, Lintlha, le matsatsi a bōpiloeng le a fetotsoeng, hammoho le hore na ntho eo e notletsoe data ea fektheri kapa che. O ka hula bokaholimo ba litšiea ho li hlophisa bocha, kapa ho fetola boholo ba litšiea. Tobetsa kholomong ea sehlooho ho hlophisa; tobetsa hape ho fetola tatellano ea ho hlopha. Letshwao la kgutlotharo le bontsha hore na ke kholomo efe e kgethetsweng ho hlopha, mme tsela ya kgutlotharo (hodimo kapa tlase) e bontsha tatellano ya ho hlopha.

Phanele ea Boitsebiso
Phanele ena e u lumella view le ho hlophisa metadata bakeng sa lintho tse khethiloeng, ho kenyeletsoa Lebitso, Pokello, Sehlopha sa 1 & 2, Mongoli, le Lintlha. Haeba ho khethiloe ntho e fetang e le 'ngoe,' me lintho li na le litlhophiso tse fapaneng bakeng sa lebala la metadata (joalo ka lebitso kapa sehlopha), lebala le bonts'a molaetsa " ” Haeba aekhone ya senotlolo e bontshwa, kgetho e kenyeletsa data ya feme, mme dikarolo ha di kgone ho hlophiswa. Leha ho le joalo, u ka kopitsa mongolo ho o beha libakeng tse ling. Phanele ea Info e ka fetoloa boholo ka ho hula lehlakore le letšehali.

Lihlopha
Likarolo li u lumella ho sefa ho latela mofuta oa molumo, joalo ka libase, li-lead, litloloko, joalo-joalo. Molumo o mong le o mong o ka arolelanoa Mahlopheng a mabeli, 'me mofuta o mong le o mong oa data-Ts'ebetso, Mananeo, joalo-joalo-o na le lethathamo la ona la Lihlopha. Tobetsa lebitsong la Sehlopha ho sefa ka Sehlopha seo; tlanya ho "X" ho tlosa khetho ea Lihlopha tsohle. Ha ho batloa ka Sehlopha, molumo o tla bontšoa haeba e 'ngoe ea Lihlopha tsa eona e lumellana le mokhoa oa ho batla.

Lipokello
Likarolo li u lumella ho hlopha melumo ka lihlopha, joalo ka melumo ea feme, liphutheloana tsa katoloso, kapa merero ea hau. Molumo o mong le o mong o ka abeloa ho Pokello e le 'ngoe. Tobetsa lebitsong la Pokello ho sefa ka Pokello eo; tobetsa "X" ho tlosa khetho ea Lipokello tsohle.

Lenane le khetho
Lethathamo lena le bonts'a likahare tsa multi/poly tse hokahantsoeng, joalo ka ha li sefshoa ke li-tab tsa mofuta oa data le sebaka sa ho batla. Tobetsa ntho e lethathamong ho e khetha. Ho khetha Lits'ebetso le Manane a Sete ho ka, ka boikhethelo, ho li khetha ho mefuta e mengata e hokahaneng. Bakeng sa tlhahisoleseding e eketsehileng, sheba "Likhetho" leqepheng la 25. Khetha lintho tse ngata tse sa tsoeleng pele ka ho tšoara konopo ea taelo ho MacOS, kapa konopo ea Ctrl ho Windows. U ka boela ua khetha mefuta e mengata ea lintho ka ho sebelisa Shift.

Mohlophisi
Sena se bonts'a liparamente tsa Ts'ebetso ea hajoale.

Ts'ebetso ea hajoale
Sena se bonts'a Ts'ebetso e sebetsang hajoale ho multi/poly e hokahantsoeng. Sena se tla ntlafatsa haeba o fetola Ts'ebetso ho mefuta e mengata, kapa ha o khetha Ts'ebetso o sebelisa Mohlophisi/Molaeborari. Ho fumana lintlha tse ling, sheba "Khetho ea Ts'ebetso" leqepheng la 25.

Mohlahlobi oa Modulation
Sena se bontša mekhoa ea ho feto-fetoha ha paramente e khethiloeng. O ka eketsa kapa wa phumula ditsamaiso lenaneng, mme wa eketsa Intensity Modulation ho tse teng tsa modulo.

LIBRARIAN le likonopo tsa EDITOR
Likonopo tse ka holimo ka letsohong le letona la fensetere e kholo li khetha hore na u sebetsa le Mohlophisi kapa Ralibuka.

Mekhahlelo AD
Li-tab tsena li khetha hore na ke Li-Layers life tse tla bontšoa, le hore na li ho (konopo e bonesitsoeng ka botala) kapa e tingoe.

Keyboard, Mehloli ea Mod, le li-tab tsa Effects
Tsena li u lumella ho hlophisa libaka tsa bohlokoa le tsa lebelo, Arpeggiator, Kaoss Physics, LFOs, Envelopes, Key Tracking, Mod processors, Motion Sequencer, le litlamorao. O ka hula ho tsoa mehloling ea mod mona ho hlophisa liparamente karolong e kholo ea skrineng, kapa esita le liparamente tse ling tsa modulation; sheba “Hula u be u lihele mekhoa ea ho feto-fetoha ha molumo oa lentsoe” leqepheng la 13.

Motion Sequence Editor
Sebaka sena se u lumella ho khetha le ho hlophisa Mehato ea Tatelano ea Motion, le view Tatelano ya Motion ka nako ya nnete. E hlaha ha tab ya Motion Sequencer e kgethwa.

Mohlahlobi oa Tatelano ea Motion
Sebaka sena se bonts'a li-parameter tsa Motion Sequence Lane e khethiloeng kapa Mohato oa Tatelano ea Motion.

Seta Lenane fensetere

Fesetere ena e bonts'a libaka tsohle tse 64 tsa Lethathamo la Set. U ka bula lifensetere tse ngata tsa Set List hang-hang. Haeba e 'ngoe ea lifensetere e bonts'a Lethathamo la Setha le khethiloeng hajoale ho li-multi / poly, lengolo "(Active)" le hlaha ka mor'a lebitso la lona bareng ea sehlooho.

Lebitso la Set List le bonts'oa ka bobeli bareng ea sehlooho ea fensetere, le tšimong e ka fetolehang e kaholimo ho fensetere. Joalo ka ba bang kaofela ba Editor/Laebrari, liphetoho life kapa life ho Setha Lists li qala ho sebetsa hanghang. Li-slots tse Khethiloeng li bonts'oa ka moralo o moputsoa. U ka khetha li-Slots tse ngata tse sa tsoeleng pele ka ho ts'oara konopo ea taelo ho MacOS, kapa konopo ea Ctrl ho Windows. Ntle le moo, khetha mefuta e mengata ea Slots ka ho sebelisa Shift. Bakeng sa litaelo tse qaqileng mabapi le ho sebelisa fensetere ena, sheba "Editing Set Lists" leqepheng la 17.

Menu

Lenaneo la lisebelisoa (MacOS feela)

Likhetho
E bonts'a lebokose la lebokose la Likhetho, le nang le liparamente tse peli: Khetho ea Ts'ebetso le Khetho ea Lethathamo.

Khetho ea Ts'ebetso
Tobetsa habeli lethathamong le khethang ho synth: Ho penya habeli Performance Window e kholo ho khetha Ts'ebetso ho mefuta e mengata. Penya e le 'ngoe e u lumella ho view le ho hlophisa metadata ea Performance ntle le ho ama molumo oa hajoale ho multi/poly. Khetha lethathamong le boetse le khetha ho synth: Ho Khetha Ts'ebetso ho Window e kholo ho boetse ho khetha Ts'ebetso ho mefuta e mengata. Sebelisa menyu ho khetha ho synth: Ha ho na liketso ho Window e kholo e tla khetha ka bo eona melumo ho mefuta e mengata. Ke feela taelo ea menu ea Edita ea Select On Synth e tla etsa joalo.

Seta Khetho ea Lethathamo
Tobetsa habeli lethathamong le bula mohlophisi: Ho tobetsa Habeli Setha List ho Window e kholo ho bula fensetere ea Set List bakeng sa Set List. Ha ho phetoho e etsoang ho khetho ea hajoale ea Set List ho mefuta e mengata. Tobetsa habeli lethathamong le khethang ho synth le ho bula mohlophisi: Ho tobetsa Habeli Set List ho Window e kholo ka bobeli ho bula fensetere ea Set List bakeng sa Set List, ebe o khetha Set List ho bongata/poly. Sebelisa menyu ho hlophisa kapa ho khetha ho synth: Ha ho liketso tse ka Window e kholo tse tla bula fensetere ea Set List, kapa khetha Setha Manane ho multi/poly. Ke feela litaelo tsa Open Editor le Khetha On Synth tse tla etsa joalo.

About
Sena se bonts'a mofuta oa software oa Multi/poly Editor/Laebrari.

File menu

Bohlokoa: Bongata ba litaelo tsena, ho kenyelletsa Import, Export, Export Bundle, Backup, le Restore, li fumaneha feela ha fensetere ea Laeborari e hlahisoa. Haeba ho hlahisoa Editor, litaelo tsena li tla ntšoa.

Boloka Tshebetso...
Sena se tlisa puisano ho hlakola Ts'ebetso ea hajoale.

Boloka Joalo ka Ts'ebetso e Ncha…
Sena se tlisa puisano ho boloka Ts'ebetso ea hajoale e le ntho e ncha, e siea mofuta o fetileng o ntse o le teng.

Lata...
E reka kantle ho naha e le 'ngoe kapa ho feta files ho tloha disk. Lintlha li tla romelloa ka kotloloho ho multi/poly. Ho fumana lintlha tse ling, sheba "Ho kenya data" leqepheng la 14.

Romela...
E romela lintho tse khethiloeng ka Window e kholo (eseng fensetere ea Set List, haeba leha e le efe e bulehile) ho motho ka mong files ho disk. Ho fumana lintlha tse ling, sheba "Exporting data" leqepheng la 14.

Romela Sephutheloana...
Taelo ena e teng haeba ho khethiloe lintho tse ngata. E romela lintho tsohle tse khethiloeng ho e le 'ngoe file ka disk. Sena se loketse ho aba sete ea melumo, mohlalaample.

Romela Sephutheloana sa Melumo Tsohle ea Basebelisi...
Sena se fumaneha feela ha mosebetsi oa Laeborari a le ts'ebetsong. E romella kantle ho naha bongata ba lintlha tsohle tse sa sireletsoang, bakeng sa ho boloka kapa ho fetisa melumo eohle ea hau ka nako e le 'ngoe.

Kenya WAV joalo ka Wavetable…
E kenya wav e le 'ngoe kapa ho feta files joalo ka Wavetables. Lintlha li tla romelloa ka kotloloho ho multi/poly. Ho fumana lintlha tse ling, sheba "Importing Wavetables" leqepheng la 15.

Boloka…
E tšehetsa litaba tsohle tsa multi/poly, ho kenyeletsoa le data ea fektheri e sirelelitsoeng, ho a file ka disk. Bakeng sa tlhaiso-leseling e batsi, sheba "Backing data all" leqepheng la 16.

Khutlisa...
E hlakola litaba tsohle tsa multi/poly, ho kenyeletsoa le data ea feme e sirelelitsoeng ka mongolo, ebe e khutlisetsa data eohle ho tsoa ho file ka disk. Ho fumana lintlha tse ling, sheba "Ho tsosolosa data" leqepheng la 16.

Lenane la ho hlophisa

Hlokomela: lits'ebetso tse ngata li sebetsa feela ha u hlophisa Set Lists, 'me li tla koaloa ka tsela e 'ngoe. Tsena li kenyelletsa Cut, Cut and Shift Slots, Copy, Peista, 'me Kenya Pele.

Etsolla
E khutlela naheng pele ho ts'ebetso e fetileng. Sena se sebetsa ho liphetoho leha e le life tse entsoeng lifensetereng tsa Mohlophisi - mohlala, ho hlophisa li-parameter tsa synthesis kapa liphello, ho theha mekhoa ea ho feto-fetoha ha maemo, joalo-joalo. Ho Setsi sa Laeborari, e sebetsa ho liphetoho tsa metadata (joalo ka mabitso le mekhahlelo), Liphetoho tsa Lethathamo la Seta, ho theha manane a Set a macha, ho pheta-pheta le ho hlakolwa ha dintho, le ho Kenya data. Hlokomela hore ho khutlisa ho tsoa ho "backup" ha ho khonehe. Sistimi e ts'ehetsa li-undos tse ngata, e le hore u ka khutlela morao le ho ea pele ka letoto la liketso. Etsolla/etsa hape nalane e bolokoa ka thoko bakeng sa mekhoa ea Librarian le Edita. Mabitso a litaelo tsa ho etsolla/tsosa a fetoha ho bontša sena; bakeng sa mohlalaample, “Mohlophisi Hlakola: Phetoho ea Boleng: Cutoff ” kapa “Ho Fetola Mosebetsi oa Laebrari: Nchafatsa Lebitso.”

Etsa hape
E khutlela mmusong pele o etsa taelo ea "Etsolla". Sistimi e ts'ehetsa li-redo tse ngata, e le hore u ka khutlela morao le ho ea pele ka letoto la liketso.

Hlakola
Sena se tlosa data e khethiloeng. Ha e sebelisoa le Set List Slots, Slots e fetoloa ho sebelisa Init Performance.
Hlokomela hore data ea feme e kanna ea se hlakoloe kapa ea fetoloa. Hape, ho tlameha ho be le bonyane Lethathamo le le leng la Set; haeba ho na le Lethathamo le le leng feela la Sete tsamaisong, le ke ke la hlakoloa.

Khaola
Sena se sebetsa ho Setha List feela. E khaola li-slot tse khethiloeng tsa Set List Slot, e li beha holim'a clipboard, ebe e li fetola ho sebelisa Init Performance.

Khaola le Shift Slots
Sena se sebetsa ho Setha List feela. E fokotsa li-slots tse khethiloeng tsa Set List Slot, 'me e fetola li-Slots tse ling kaofela ho tlatsa sekheo. Li-Slots tse ncha tse se nang letho qetellong ea Set List li tla tlatsoa ke Init Performance.

Kopitsa
Sena se sebetsa ho Setha List feela. E kopitsa "Set List Slot" tse khethiloeng, 'me e beha data ea bona ho clipboard hore e sebelisoe ho Peista kapa Kenya Pele.

Beha
Sena se sebetsa ho Setha List feela. E nkela sebaka se khethiloeng sa Set List Slot, le Slots e ka bang teng kamora moo, ka data e ho clipboard.
Haeba ho khethiloe Li-Slots tse ngata, ke khetho ea linomoro tse tlase feela e amang ts'ebetso ea Peista; likhetho tse ling li hlokomolohuoa.

Bohlokoa: haeba clipboard e na le Li-Slots tse ngata, Peista e tla qala ka Slots ea pele e khethiloeng ebe e nka sebaka sa Slots e ngata kamoo ho hlokahalang, ho sa tsotelehe hore na ho khethiloe Li-Slots tse ling tse kae. Bakeng sa mohlalaample, haeba ho na le li-Slots tse 'ne holim'a clipboard, ebe u khetha Slots A3 le A7 ebe Paste, Slots A3, A4, A5, le A6 li tla nkeloa sebaka ke data e tsoang ho clipboard.

Kenya Pele
Sena se sebetsa feela ho Set List editing. E kenya data ho clipboard ho Lethathamo la Set pele ho Setulo sa Lethathamo le khethiloeng, ebe e chencha Slots e latelang ho bula sebaka. Li-slots qetellong ea Set List li tla "sutumelloa qetellong" 'me li tlosoe. Joalo ka Peista, haeba ho khethiloe Li-Slots tse ngata, ke khetho ea linomoro tse tlase feela e amang ts'ebetso ea Insert Before; likhetho tse ling li hlokomolohuoa.

Ea bobeli
Fesetereng e kholo, sena se pheta ntho e khethiloeng.

Kgetha Tsohle
Sena se khetha lintho tsohle tse bonts'itsoeng fensetereng e ka pele haholo, ho kenyeletsoa lifensetere tse kholo kapa tsa Set List.

Tlosa ho Khetha Tsohle
Sena se hlakola khetho efe kapa efe ea hajoale fensetereng e ka pele haholo.

New Set List
Sena se theha Lethathamo le lecha la Litlhophiso, ka li-Slots tsohle tse behiloeng ho Init Performance. E fumaneha ho tsoa ho Window e kholo, ha e bonts'a Lintlha Tsohle kapa Manane a Sete.

Bula Set List Editor
Ha Lethathamo la Set le khethiloe Fensetereng e ka Sehloohong, sena se bula fensetere ea Set List bakeng sa Set List. Haeba multiple Set Lists khethiloe, e bula bahlolohali bakeng sa e mong le e mong oa bona.

Khetha Ho Synth
Ha Lethathamo la Ts'ebetso kapa Lethathamo le khethiloe Fensetereng e kholo, sena se khetha ntho e ho multi/poly. Ha fensetere ea Set List e sebetsang e butsoe, sena se khetha Set List Slot ea hajoale. Ha fensetere ea Set List e sa sebetseng e butsoe, sena se khetha Tshebetso e abetsoeng Set List Slot.

Bula Set List Editor
Ha Lethathamo la Set le khethiloe Fensetereng e ka Sehloohong, sena se bula fensetere ea Set List bakeng sa Set List. Haeba multiple Set Lists khethiloe, e bula bahlolohali bakeng sa e mong le e mong oa bona.

Litlhophiso tsa Global UTILITY…
Sena se bula fensetere ea Litlhophiso tsa Global UTILITY, ho edita li-setting tsa li-controller, li-setting tsa MIDI, joalo-joalo. Ho fumana lintlha tse ling, sheba "Editing Global UTILITY Settings" leqepheng la 20.

Netefatsa Boitsebiso ba Modumo...
Sena se lekola lintlha tsa molumo seletsa, 'me se lokisa litaba haeba ho hlokahala. E hlokahala feela (mme e na le phello leha e le efe feela!) maemong a sa tloaelehang. Sebelisa sena hafeela u khothaletsoa ke basebetsi ba ts'ehetso ea Korg.

Likhetho (Windows feela)
Sena se bonts'a lebokose la Likhetho. Ho fumana lintlha tse ling, sheba “Likhetho” leqepheng la 25.

View menu

Bontša Mohlokomeli oa Libuka
Sena se fetola fensetere e kholo ho bonts'a Mohlokomeli oa Libuka. Hoa tšoana le ho tobetsa konopo ea Laeborari e kaholimo ho le letona la fensetere.

Hlahisa Mohlophisi
Sena se fetola ka sehloohong fensetere ho bontša Editor. Hoa tšoana le ho tobetsa konopo ea Editor e kaholimo ho le letona la fensetere.

Atometsa 50%…150%
Sena se lekanya fensetere eohle ea Mohlophisi/Molaeborari hore e be nyane kapa e kholoanyane.

Lisebelisoa tsa menu
Lenane lena le bonts'a mefuta eohle ea li-multi/poly tse hoketsoeng komporong, 'me e khetha e 'ngoe ea tsona e tla sebelisoa ke Mohlophisi/Molaeborari. Haeba ho na le li-multi / polys tse ngata, u ka li fetola ka nako efe kapa efe. Tlhokomeliso: ha u fetola lisebelisoa, nalane ea ho etsolla e tla hlakoloa, ka hona, etsolla/tsosa e ke ke ea hlola e fumaneha bakeng sa liketso tse fetileng.
Lintlha ha li khone ho kopitsoa ka kotloloho ho tloha ho tse ngata ho ea ho tse ling; ho e-na le hoo, sebelisa Export ho boloka data ho tsoa ho mefuta-futa ea pele, 'me u kenye ho kenya data ho multi/poly ea bobeli.

Bohlokoa: Pele o hokela li-multi/poly tse ngata, etsa bonnete ba hore u beha ID ea sistimi ea sesebelisoa ho nomoro e fapaneng. Ho fumana lintlha tse ling, sheba "Ho Sebelisa Mohlophisi/Mohlokomeli oa Libuka ka mefuta e 'meli kapa ho feta" leqepheng la 6.

Menyu ea Windows
Lenane lena le bontša lifensetere tsohle tse butsoeng tsa Mohlophisi/Molaeborari. Khetha lebitso la fensetere ho le tlisa ka pele.

Fesetere e kholo
Fesetere e kholo e lula e bonts'oa kaholimo ho menu. Hlokomela hore ho koala Window e kholo ho tla emisa sesebelisoa sa Mohlophisi/Molaeborari.

Seta Lenane la Windows
Bula Set List lifensetere, haeba li teng, li thathamisitsoe ka tlase ho Window e kholo.

Koala All Set List Windows
Taelo ena e koala lifensetere tsohle tse bulehileng tsa Set List.

Koala Fensetere ea Lenane la Hona Joale
Taelo ena e koala fensetere ea Set List e ka pele ho fetisisa.

Lenane la thuso

Sebaka sa ho batla (MacOS feela)
Sena se hlahisa lenane le tloaelehileng la ho batla bakeng sa thuso ea sistimi, ho kenyeletsoa le litaelo tsa menyu ea sesebelisoa.

Mabapi le Multi/poly Editor/Laebrari (Windows feela)
Sena se bonts'a mofuta oa software oa Multi/poly Editor/Laebrari.

Sheba Lintlafatso…
Sena se lekola ho bona hore na mofuta o mocha oa fumaneha. Haeba ho joalo, puisano e hlaha e nang le sehokelo sa ho jarolla.

Bula Bukana ea Marang-rang
Sena se bula mofuta oa morao-rao oa bukana ea PDF ho sebatli sa hau.

Ho batle phoso

Software e hana ho qala
Etsa bonnete ba hore komporo ea hau e fihlela litlhoko tsa ts'ebetso
Sheba “Litlhoko tsa ho sebetsa” leqepheng la 3.

Sheba hore na lisebelisoa tse ling li ka 'na tsa sebetsa
Haeba lits'ebetso tse ling li ntse li sebetsa, ho ka etsahala hore ka tsela e itseng li kena-kenana le Multi/poly Editor/Laebrari. E le mohato oa ho rarolla mathata, tlohela lits'ebetso tse ling.

Ha e khone ho hokela ho mefuta e mengata

Etsa bonnete ba hore multi/poly e hokahane ka USB
Mohlophisi/Mohlokomeli oa libuka o hloka USB, 'me ha a khone ho buisana le multi/poly over 5-pin DIN MIDI.

Leka ho hokela multi/poly ka kotloloho komporong ea hau, ntle le hub ea USB
Li-hubs tse fosahetseng li ka kena-kenana le khokahanyo. Li-Hubs li tlameha ho tšehetsa USB 2.0 kapa ho feta.

Leka thapo e fapaneng ya USB
Thapo e fosahetseng e ka kena-kenana le khokahanyo.

Netefatsa hore multi/poly e sebelisa software version 1.0.2 kapa hamorao
Ho sheba nomoro ea mofuta oa software, tobetsa SEBELISA ebe u SHIFT + <(LEQEPHE -).

Netefatsa hore multi/poly e fumanwe ke komporo e hoketsweng

• Windows: bula Sesebelisoa sa Sesebelisoa (bona litaelo tse tlas'a "Windows" leqepheng la 5) 'me u hlahlobe "Lisebelisoa tse ling". Haeba multi/poly e sa hlahe, pheta ts'ebetso ea tlhophiso ea NCM kapa RNDIS.
• Mac OS: bula sesebelisoa sa Likhetho tsa Sistimi, ho foldareng ea Likopo. Eya ho "Network panel", 'me u hlahlobe lethathamo la marang-rang le lisebelisoa tsa marang-rang ka letsohong le letšehali la fensetere.

Etsa bonnete ba hore likou tse hlokahalang tsa marang-rang ha lia thibeloa ke software ea firewall
Ha o buisana le multi/poly holim'a USB, Editor/Laebrari e sebelisa likou tsa TCP 50000 le 50001, 'me Bonjour e sebelisa UDP port 5353. Tsena li ke ke tsa angoa ke firewall ea kantle ho seva kapa router e arohaneng, empa e ka thijoa ke firewall ea software e sebetsang khomphuteng e tšoanang.

Tlosa software ea VPN
Basebelisi ba bang ba tlalehile hore software ea VPN e ka kena-kenana le puisano le batho ba bangata / ba bangata.

Windows: netefatsa hore Bonjour e ea sebetsa
Bula Litšebeletso, fumana Tšebeletso ea Bonjour lethathamong, 'me u tiise hore Boemo ba eona bo ea Matha mme Mofuta oa ho Qala o setiloe ho Automatic.

Netefatsa hore u na le mofuta oa morao-rao oa Mohlophisi/Mohlokomeli oa libuka
U ka khoasolla mofuta oa morao-rao ho tsoa ho Korg websaete (http://www.korg.com/ ).

Leka ho qala komporo ea hau bocha
Maemong a mang, multi/poly e kanna ea se tsejoe hang hang kamora ho kenya. Haeba sena se etsahala, qala komporo ea hau hape.

Windows: hlahloba Motsamaisi oa Sesebelisoa
Bula Motsamaisi oa Sesebelisoa, 'me u fumane multi/poly. Haeba e sa bontšoa tlas'a Lisebelisoa tse ling kapa li-adapter tsa Network, sheba tlas'a Universal Serial Bus controller. Haeba ho na le sesebelisoa se secha se bitsoang "USB Composite Device," se tšoailoeng ka letšoao la "temoso" (karolo ea mohoo ka har'a khutlotharo e mosehla), tlanya habeli sekenong seo ho hlahisa puisano ea Properties. Haeba tab ea Kakaretso e bontša boemo ba sesebelisoa e le "ha e khone ho qala" ka khoutu ea -10, sena e ka 'na ea e-ba bothata. Ho rarolla bothata bona, tlanya ka ho le letona ho "USB Composite Device" ho hlahisa lethathamo la maemo, 'me u khethe khetho ea Uninstall Device. Tobetsa konopo ea Uninstall moqoqong o hlahang. Ka mor'a sena, tlosa thapo ea USB ho tloha ho multi / poly, ema hakhutšoanyane, ebe u e hokahanya hape. Sesebelisoa se secha sa CDC NCM (kapa RNDIS) se lokela ho hlaha, hape ka letšoao la temoso; sena se bontsha hore bongata/poly e fumanwe ka nepo. Qetellong, etsa hape ho kenya Editor/Laebrari, joalo ka ha ho hlalositsoe tlasa "Windows" leqepheng la 5.

Letšoao la Apple, Mac le Mac, Bonjour, logo ea Bonjour, le letšoao la Bonjour ke matšoao a Apple Inc., a ngolisitsoeng US le linaheng tse ling. Windows 10 le Windows 11 ke matšoao a khoebo a Microsoft Corporation ho la US le linaheng tse ling. Mabitso ohle a lihlahisoa le mabitso a lik'hamphani ke matšoao a khoebo kapa matšoao a ngolisitsoeng a beng ba tsona ka ho fapana. Litlhaloso le ponahalo li ka fetoha ntle le tsebiso bakeng sa ntlafatso.

Litokomane / Lisebelisoa

	KORG Multi Poly Analog Modeling Synthesizer [pdf] Buka ea Mong'a Multi Poly Analog Modeling Synthesizer, Multi Poly, Analog Modeling Synthesizer, Modeling Synthesizer, Synthesizer
	KORG Multi Poly Analog Modeling Synthesizer [pdf] Buka ea Mong'a Multi Poly Analog Modeling Synthesizer, Poly Analog Modeling Synthesizer, Analog Modeling Synthesizer, Modeling Synthesizer, Synthesizer
	KORG multi poly Analog Modeling Synthesizer [pdf] Buka ea Mong'a E1, Multi poly Analog Modeling Synthesizer, poly poly, Analog Modeling Synthesizer, Modeling Synthesizer, Synthesizer

Litšupiso

• Bukana ea Mosebelisi