Fronius RI MOD Compact Com Module

Litlhaloso

• Lebitso la Sehlahiswa: RI FB PRO/i RI MOD/i CC Ethernet/IP-2P
• Morekisi: Fronius International GmbH
• Mofuta oa Sesebelisoa: Adapter ea puisano
• Khouto ya Sehlahiswa: 0320hex (800dez)
• Mofuta oa setšoantšo: Setšoantšo se Tloaelehileng
• Mofuta oa Mohlala: Mohlala oa ho Hlahisa
• Mohlala oa ho ja: Mohlala oa ho ja
• Lebitso la Mohlala: Fronius-FB-Pro-EtherNetIP(TM)

Litaelo tsa Tšebeliso ea Sehlahisoa

Ho beha Aterese ea IP ea Module oa Bese
Aterese ea IP ea mojule oa bese e ka hlophisoa ho sebelisoa li-switches tsa DIP sehokelong:

1. Beha aterese ea IP ka har'a sebaka sa 192.168.0.xx (moo xx e lumellanang le DIP switjha maemo ho tloha 1 ho 63).
2. Litlhophiso tsa phetoho ea DIP le liaterese tse tsamaellanang tsa IP:

Kena switch	IP Aterese
TLOA TSOA ON	1
TLOA TSOA ON ON ON	2
TLOA TIMA ON ON	3
ON ON ON ON Off	62
TSOELA PELE ON ON	63

Mefuta ea Lintlha le 'Mapa oa Lipontšo
Sehlahisoa se sebelisa mefuta e latelang ea data:

• UINT16 (Insigned Integer) - Range: 0 ho 65535
• SINT16 (Tlhahiso e saennoeng) - Range: -32768 ho ea ho 32767

Ho etsa 'mapa oa liaterese bakeng sa matšoao a ho kenya le ho tsoa:

Aterese	Mofuta	Tlhaloso
0-7	Letšoao la BIT	Lintlha tsa 'Mapa oa Letšoao

Kakaretso

Polokeho

TEMOSO!
Kotsi ea ts'ebetso e fosahetseng le mosebetsi o sa etsoeng hantle. Sena se ka fella ka kotsi e tebileng ea botho le tšenyo ea thepa.

• Mesebetsi eohle le mesebetsi e hlalositsoeng tokomaneng ena e tlameha ho etsoa feela ke basebetsi ba koetlisitsoeng ka botekgeniki le ba nang le mangolo.
• Bala le ho utloisisa tokomane ena ka botlalo.
• Bala le ho utloisisa melao eohle ea polokeho le litokomane tsa basebelisi bakeng sa sesebelisoa sena le likarolo tsohle tsa sistimi.

Lihokelo le Lipontšo

1	TX+
2	TX-
3	RX+
6	EA-XNUMX-RX
4,5,7,	Ha e sebelisoe hangata; ho netefatsa-
8	re bonts'a botlalo, the
	Lithapa li tlameha ho ba Intercon-
	nected le, ka mor'a ho feta
	ka potoloho ea sefe, e tlameha
	ho fedisa fatshe
	mokhanni (PE).

Khokahano ea RJ45

(1) LED MS - Boemo ba Mojule

E tima: Ha ho phepelo voltage

E bonesa botala: Laolwa ke monghali

E benya botala (hang): Master ha e lokisoe kapa ha e sebetse hantle

E khantša bofubelu: Phoso e kholo (ntle le boemo, phoso e tebileng, ...)

E benya bofubelu: Phoso e nepahetseng

(2) LED NS - Boemo ba marang-rang

E tima: Ha ho phepelo voltage kapa ha ho aterese ea IP

E bonesa botala: Marang-rang, khokahano e le 'ngoe kapa ho feta e thehiloe (CIP sehlopha 1 kapa 3)

Botala bo benya: Marang-rang, ha ho khokahano e thehiloeng

E khantša bofubelu: Aterese ea IP e habeli, phoso e tebileng

E benya bofubelu: Ho fetella ha nako bakeng sa likhokahano tse le 'ngoe kapa ho feta (CIP sehlopha sa 1 kapa sa 3)

Thepa ea ho fetisoa ha data

Theknoloji ea ho fetisa

• Ethernet

Mahareng

• Ha u khetha lithapo le li-plug, khothaletso ea ODVA bakeng sa moralo le ho kenya lisebelisoa tsa EtherNet / IP e tlameha ho hlokomeloa. Liteko tsa EMC li entsoe ke moetsi ka thapo IE-C5ES8VG0030M40M40-F.

Lebelo la phetiso

• 10 Mbit/s kapa 100 Mbit/s

Khokahano ea libese

• RJ-45 Ethernet / M12

Li-Parameters tsa Tlhophiso

• Lits'ebetsong tse ling tsa taolo ea liroboto, ho ka 'na ha hlokahala hore u bolele litlhophiso tsa tlhophiso tse hlalositsoeng mona e le hore mochini oa bese o ka buisana le roboto.

Paramethara	Boleng	Tlhaloso
ID ea morekisi	0534hex (1332dec)	Fronius International GmbH
Mofuta oa Sesebelisoa	000Chex (12dec)	Adapter ea puisano
Khoutu ea Sehlahisoa	0320hex (800dec)	Fronius FB Pro Ethernet/IP-2-Port

Lebitso la Sehlahiswa Fronius-FB-Pro-EtherNetIP(TM)

Mofuta oa setšoantšo	Mofuta oa Mohlala	Mohlala Lebitso	Mohlala Tlhaloso	Nomoro ea mohlala	Boholo [Ka e]
Setšoantšo se Tloaelehileng	Sehlahisoa se tlang	Input Data Standard	Lintlha tse tsoang mohloling oa matla ho ea ho roboto	100	40

Mofuta oa setšoantšo	Mofuta oa Mohlala	Mohlala Lebitso	Mohlala Tlhaloso	Nomoro ea mohlala	Boholo [Ka e]
	Mohlala oa ho senya	Output Data Standard	Lintlha tse tsoang ho roboto ho ea mohloling oa matla	150	40
Setšoantšo sa Moruo	Sehlahisoa se tlang	Input Data Standard	Lintlha tse tsoang mohloling oa matla ho ea ho roboto	101	16
	Mohlala oa ho senya	Output Data Standard	Lintlha tse tsoang ho roboto ho ea mohloling oa matla	151	16

Ho theha Aterese ea IP ea Module oa Bese
Ho beha Aterese ea IP ea Mojule oa Libese U ka seta aterese ea IP ea mojule oa bese ka tsela e latelang:

1. Ho sebelisa sesebelisoa sa DIP sehokelong se ka har'a sebaka se hlalosoang ke 192.168.0.xx (xx = DIP switch setting = 1 ho isa ho 63)
   • Maemo ohle a behiloe maemong a OFF femeng. Tabeng ena, aterese ea IP e tlameha ho behoa ho websebaka sa mochini oa welding
2.  Holima websebaka sa mochini oa welding (haeba maemo ohle a switch ea DIP a behiloe sebakeng sa OFF)

Aterese ea IP e behiloe ho sebelisoa DIP switjha maemo 1 ho 6. Tlhophiso e etsoa ka mokhoa oa binary. Sena se fella ka mefuta e fapaneng ea tlhophiso ea 1 ho isa ho 63 ka sebopeho sa decimal.

Example bakeng sa tlhophiso the IP aterese ea mojule oa libese o sebelisa switch ea DIP sebopeho:
Senya switch
8	7	6	5	4	3	2	1	Aterese ea IP
–	–	TLOA	TLOA	TLOA	TLOA	TLOA	ON	1
–	–	TLOA	TLOA	TLOA	TLOA	ON	TLOA	2
–	–	TLOA	TLOA	TLOA	TLOA	ON	ON	3
–	–	ON	ON	ON	ON	ON	TLOA	62
–	–	ON	ON	ON	ON	ON	ON	63

Litaelo tsa ho seta aterese ea IP ho websebaka sa mochini oa welding:
Ela hloko aterese ea IP ea mochini oa tjheseletsa o sebelisitsoeng:

1. Ka phanele ea taolo ea mochini oa welding, khetha "Defaults"
2. Ka phanele ea taolo ea mochini oa welding, khetha "Sistimi"
3. Ka phanele ea taolo ea mochini oa welding, khetha "Lintlha".
4.  Ela hloko aterese ea IP e bontšitsoeng (mohlalaampSetšoantšo: 10.5.72.13)

Access the websebaka sa mochini oa welding ho sebatli sa Marang-rang:

1. Hokela komporo ho marang-rang a mochini oa welding
2. Kenya aterese ea IP ea mochini oa welding sebakeng sa ho batla sebatli sa marang-rang 'me u netefatse
3. Kenya lebitso le tloaelehileng la mosebelisi (admin) le password (admin)
   • The websebaka sa mohloli oa matla se hlahisoa

Beha aterese ea IP ea mojule oa bese:

1. Mochineng oa ho cheselletsa matla, khetha "RI FB PRO/i" tab
2. Kenya aterese ea IP eo u e batlang bakeng sa sebopeho tlas'a "Module configuration". Bakeng sa mohlalaampLe: 192.168.0.12
3. Khetha "Set configuration"
4. Khetha "Restart module"
   • Aterese ea IP e behiloeng e kentsoe

Lipontšo tsa ho kenya le ho tsoa

Mefuta ea data

Ho sebelisoa mefuta e latelang ea data:

• UINT16 (Integer e sa ngolisoang)
  • Palo eohle ho tloha ho 0 ho isa ho 65535
• SINT16 (Nako e saennoeng)
  • Palo eohle e tloha ho -32768 ho isa ho 32767

Phetolelo examphanyane:

• bakeng sa boleng bo nepahetseng (SINT16) mohlala lebelo la terata le lakatsehang x factor 12.3 m/min x 100 = 1230dec = 04CEhex
• bakeng sa boleng bo fosahetseng (SINT16) mohlala tokiso ea arc x factor -6.4 x 10 = -64dec = FFC0hex

Ho fumaneha ha matšoao a ho kenya
Lipontšo tsa ho kenya tse thathamisitsoeng ka tlase li fumaneha ho tsoa ho firmware V2.0.0 ea RI FB PRO/i ho ea pele.

Lipontšo tsa ho kenya (ho tloha ho roboto ho ea mohloling oa matla)

Aterese				Letshwao	Mofuta oa ts'ebetso / data	Range	Ntlha	Sebetsa setšoantšo
Leloko			E feletseng					Standard	Moruo
LENTSOE	BYTE	MOKHOOA	MOKHOOA
0	0	0	0	Qala ho Welding	Keketseho- bina			ü	ü
		1	1	Robot e lokile	Phahameng
		2	2	Mokhoa oa ho sebetsa Bit 0	Phahameng	Sheba tafole Boleng Range bakeng sa Ho sebetsa Mokhoa leqepheng la 35
		3	3	Mokhoa oa ho sebetsa Bit 1	Phahameng
		4	4	Mokhoa oa ho sebetsa Bit 2	Phahameng
		5	5	Mokhoa oa ho sebetsa Bit 3	Phahameng
		6	6	Mokhoa oa ho sebetsa Bit 4	Phahameng
		7	7	—
	1	0	8	Khase e bulehile	Keketseho- bina
		1	9	Khoele ea pele	Keketseho- bina
		2	10	Khoele ka morao	Keketseho- bina
		3	11	Phoso ea ho tlohela	Keketseho- bina
		4	12	Ho ama ha motho a ama	Phahameng
		5	13	Toche e tima	Keketseho- bina
		6	14	Khetho ea ho sebetsa Bit 0	Phahameng	Sheba tafole Boleng range Process li- ha khethan leqepheng la 36
		7	15	Khetho ea ho sebetsa Bit 1	Phahameng

Aterese				Letshwao	Mofuta oa ts'ebetso / data	Range	Ntlha	Sebetsa setšoantšo
Leloko			E feletseng					Standard	Moruo
LENTSOE	BYTE	MOKHOOA	MOKHOOA
1	2	0	16	Ketsiso ya welding	Phahameng			ü	ü
		1	17	Ts'ebetso ea welding MIG/MAG: 1)   Synchro pulse on	Phahameng
				Ts'ebetso ea welding WIG: 2)   TAC ho	Phahameng
		2	18	Ts'ebetso ea welding WIG: 2)   Cap shape	Phahameng
		3	19	—
		4	20	—
		5	21	Booster buka	Phahameng
		6	22	terata e robehile	Phahameng
		7	23	Torchbody Xchange	Phahameng
	3	0	24	—
		1	25	Mokhoa oa ho ruta	Phahameng
		2	26	—
		3	27	—
		4	28	—
		5	29	Wire ho tloha qalong	Keketseho- bina
		6	30	Ho robeha ha mohala	Keketseho- bina
		7	31	—

Aterese				Letshwao	Mofuta oa ts'ebetso / data	Range	Ntlha	Sebetsa setšoantšo
Leloko			E feletseng					Standard	Moruo
LENTSOE	BYTE	MOKHOOA	MOKHOOA
2	4	0	32	TWIN mode Bit 0	Phahameng	Sheba tafole Boleng Phaello e phahameng ka ho fetisisa ea liabo tsa TWIN Mokhoa leqepheng la 36		ü	ü
		1	33	TWIN mode Bit 1	Phahameng
		2	34	—
		3	35	—
		4	36	—
		5	37	Mokhoa oa litokomane	Phahameng	Sheba tafole Boleng Range bakeng sa Docu- mentation Mokgwa leqepheng la 36
		6	38	—
		7	39	—
	5	0	40	—
		1	41	—
		2	42	—
		3	43	—
		4	44	—
		5	45	—
		6	46	—
		7	47	Tlosa tokiso e laoloang ke mokhoa	Phahameng

Aterese				Letshwao	Mofuta oa ts'ebetso / data	Range	Ntlha	Sebetsa setšoantšo
Leloko			E feletseng					Standard	Moruo
LENTSOE	BYTE	MOKHOOA	MOKHOOA
3	6	0	48	—				ü	ü
		1	49	—
		2	50	—
		3	51	—
		4	52	—
		5	53	—
		6	54	—
		7	55	—
	7	0	56	ExtInput1 => OPT_Output 1	Phahameng
		1	57	ExtInput2 => OPT_Output 2	Phahameng
		2	58	ExtInput3 => OPT_Output 3	Phahameng
		3	59	ExtInput4 => OPT_Output 4	Phahameng
		4	60	ExtInput5 => OPT_Output 5	Phahameng
		5	61	ExtInput6 => OPT_Output 6	Phahameng
		6	62	ExtInput7 => OPT_Output 7	Phahameng
		7	63	ExtInput8 => OPT_Output 8	Phahameng
4	8- 9	0–7	64–79	Sebopeho sa welding- / Nomoro ea mosebetsi	UINT16	0 ho ea ho 1000	1	ü	ü
5	10 - 11	0-7	80-95	Ts'ebetso ea welding MIG/MAG: 1) Constant Wire:   Boleng ba taelo ea lebelo la phepelo ea mohala	SINT16	-327,68 ho 327,67 [m/mots]	100	ü	ü
				Ts'ebetso ea welding WIG: 2)   Main- / Hotwire boleng ba taelo ea hajoale	UINT16	0 ho 6553,5 [A]	10
				Bakeng sa mokhoa oa mosebetsi:   Tokiso ea matla	SINT16	-20,00 ho 20,00 [%]	100

Aterese				Letshwao	Mofuta oa ts'ebetso / data	Range	Ntlha	Sebetsa setšoantšo
Leloko			E feletseng					Standard	Moruo
LENTSOE	BYTE	MOKHOOA	MOKHOOA
6	12 - 13	0-7	96-111	Ts'ebetso ea welding MIG/MAG: 1)   Arclength tokiso	SINT16	-10,0 ho 10,0 [Schritte]	10	ü	ü
				Mokhoa oa ho cheselletsa MIG/MAG Standard-Manuel:   Welding voltage	UINT16	0,0 ho 6553,5 [V]	10
				Ts'ebetso ea welding WIG: 2)   Boleng ba taelo ea lebelo la phepelo ea mohala	SINT16	-327,68 ho 327,67 [m/mots]	100
				Bakeng sa mokhoa oa mosebetsi:   Arclength tokiso	SINT16	-10,0 ho 10,0 [Schritte]	10
				Ts'ebetso ea welding Constant Wire:   Hona joale Hotwire	UINT16	0,0 ho 6553,5 [A]	10
7	14 - 15	0-7	112-127	Ts'ebetso ea welding MIG/MAG: 1)   Pulse-/ dynamic tokiso	SINT16	-10,0 ho 10,0 [mehato]	10	ü	ü
				Mokhoa oa ho cheselletsa MIG/MAG Standard-Manuel:   Matla	UINT16	0,0 ho 10,0 [mehato]	10
				Ts'ebetso ea welding WIG: 2)   Tokiso ea mohala	SINT16	-10,0 ho 10,0 [mehato]	10
8	16 - 17	0-7	128-143	Ts'ebetso ea welding MIG/MAG: 1)   Tokiso ea ho khutlisa mohala	UINT16	0,0 ho 10,0 [mehato]	10	ü
				Ts'ebetso ea welding WIG: 2)   Qetello ea ho khutlisa mohala	UINT16	TIMA, 1 ho 50 [limilimithara]	1
9	18 - 19	0-7	144-159	Lebelo la welding	UINT16	0,0 ho 1000,0 [cm/mots]	10	ü

Aterese				Letshwao	Mofuta oa ts'ebetso / data	Range	Ntlha	Sebetsa setšoantšo
Leloko			E feletseng					Standard	Moruo
LENTSOE	BYTE	MOKHOOA	MOKHOOA
10	20 - 21	0-7	160-175	Tokiso e laoloang ke ts'ebetso		Sheba tafole Boleng range bakeng sa Tshebetso laoloa tokiso leqepheng la 36		ü
11	22 - 23	0-7	176-191	Ts'ebetso ea welding WIG: 2)   Ho qala ho beha mehala				ü
12	24 - 25	0-7	192-207	—				ü
13	26 - 27	0-7	208-223	—				ü
14	28 - 29	0-7	224-239	—				ü
15	30 - 31	0-7	240-255	Bolelele ba mohala pele / morao	UINT16	TLOA / 1 ho 65535 [mm]	1	ü
16	32 - 33	0-7	256-271	Ho lemoha ka terata	UINT16	TLOA / 0,5 ho isa ho 20,0 [mm]	10	ü
17	34 - 35	0-7	272-287	—				ü
18	36 - 37	0-7	288-303	—				ü
19	38 - 39	0-7	304-319	Nomoro ea seam	UINT16	0 ho 65535	1	ü

1. MIG/MAG Puls-Synergic, MIG/MAG Standard-Synergic, MIG/MAG Standard- dard-Manuel, MIG/MAG PMC, MIG/MAG, LSC
2. Wig terata e batang, WIG hotwire

Boleng Range bakeng sa Mokhoa oa ho sebetsa

hanyane 4	hanyane 3	hanyane 2	hanyane 1	hanyane 0	Tlhaloso
0	0	0	0	0	Khetho ea ka hare ea parameter
0	0	0	0	1	Litšobotsi tse khethehileng tsa 2-step mode
0	0	0	1	0	Mokhoa oa mosebetsi

hanyane 4	hanyane 3	hanyane 2	hanyane 1	hanyane 0	Tlhaloso
0	1	0	0	0	Litšobotsi tsa mokhoa oa mehato e 2
0	1	0	0	1	Mehato e 2 ea tataiso ea MIG/MAG
1	0	0	0	0	Mokhoa o sa Sebetseng
1	0	0	0	1	Emisa pompo e pholisang
1	1	0	0	1	R/L-Tekanyo

Boleng ba boleng ba mokhoa oa ho sebetsa

Phaello ea Boleng bakeng sa Mokhoa oa Litokomane

hanyane 0	Tlhaloso
0	Nomoro ea seam ea mochini oa welding (ka hare)
1	Nomoro ea seam ea liroboto (Lentsoe 19)

Boleng ba boleng ba mokhoa oa litokomane

Boleng ba boleng ba tokiso e etelletsoeng pele ke Tsamaiso

Tshebetso	Letshwao	Mofuta oa ts'ebetso / data	Tlhophiso ea palo ea boleng mefuta-futa	Yuniti	Ntlha
PMC	Arc bolelele stabilizer	SINT16	-327.8 ho ea ho +327.7 0.0 ho ea ho +5.0	Metsotso	10

Boleng ba boleng ba mokhoa oa litokomane

Boleng ba boleng ba tokiso e etelletsoeng pele ke Tsamaiso

Tshebetso	Letshwao	Mofuta oa ts'ebetso / data	Tlhophiso ea palo ea boleng mefuta-futa	Yuniti	Ntlha
PMC	Arc bolelele stabilizer	SINT16	-327.8 ho ea ho +327.7 0.0 ho ea ho +5.0	Metsotso	10

Boleng ba boleng bakeng sa tokiso e itshetlehileng ka tshebetso

Boleng ba boleng Khetho ea mela ea ts'ebetso

hanyane 1	hanyane 0	Tlhaloso
0	0	Mola oa 1 oa tšebetso (ka ho sa feleng)
0	1	Mokhoa oa 2 oa ts'ebetso
1	0	Mokhoa oa 3 oa ts'ebetso
1	1	Reserved

Lethathamo la boleng bakeng sa khetho ea mohala oa tšebetso

Phaello ea Boleng bakeng sa Mokhoa oa TWIN

hanyane 1	hanyane 0	Tlhaloso
0	0	TWIN Mokhoa o le mong
0	1	TWIN Moetapele oa pele
1	0	TWIN Trail mode
1	1	Reserved

Boleng ba boleng ba mokhoa oa TWIN

Ho fumaneha ha matšoao a tlhahiso
Lipontšo tsa tlhahiso tse thathamisitsoeng ka tlase li fumaneha ho tsoa ho firmware V2.0.0 ea RI FB PRO/i ho ea pele.

Lipontšo tsa Output (ho tloha Mohloling oa Matla ho ea ho Robot)

Aterese				Letshwao	Mofuta oa ts'ebetso / data	Range	Ntlha	Sebetsa setšoantšo
mong ka			feletseng					Standard	Moruo
LENTSOE	BYTE	MOKHOOA	MOKHOOA
0	0	0	0	Heartbeat Powersource	Phahameng/ Tlase	1 Hz		ü	ü
		1	1	Mohloli oa matla o lokile	Phahameng
		2	2	Tlhokomediso	Phahameng
		3	3	Ts'ebetso e sebetsa	Phahameng
		4	4	Phallo ea hajoale	Phahameng
		5	5	Arc stable- / touch signal	Phahameng
		6	6	Letšoao le ka sehloohong la hona joale	Phahameng
		7	7	Lets'oao la ho thetsa	Phahameng
	1	0	8	Lebokose la ho thulana le sebetsa	Phahameng	0 = ho thula kapa ho robeha ha thapo
		1	9	Ho lokolloa ha Robot Motion	Phahameng
		2	10	Wire stick workpiece	Phahameng
		3	11	—
		4	12	Keletso ea ho ikopanya le potoloho e khutšoane	Phahameng
		5	13	Khetho ea parameter ka ho sa feleng	Phahameng
		6	14	Nomoro ea sebopeho e nepahetse	Phahameng
		7	15	'Mele oa toche oa tšoara	Phahameng

Aterese				Letshwao	Mofuta oa ts'ebetso / data	Range	Ntlha	Sebetsa setšoantšo
mong ka			feletseng					Standard	Moruo
LENTSOE	BYTE	MOKHOOA	MOKHOOA
1	2	0	16	Boleng ba taelo ha bo fihlellehe	Phahameng			ü	ü
		1	17	Khalemelo e felile	Phahameng
		2	18	—
		3	19	Limitsignal	Phahameng
		4	20	—
		5	21	—
		6	22	Boemo ba phepelo ea mantlha	Tlase
		7	23	—
	3	0	24	Boemo ba kutlo 1	Phahameng	Sheba tafole Abela- maikutlo a Sensor Sta- e sebelisa 1-4 leqepheng la 40
		1	25	Boemo ba kutlo 2	Phahameng
		2	26	Boemo ba kutlo 3	Phahameng
		3	27	Boemo ba kutlo 4	Phahameng
		4	28	—
		5	29	—
		6	30	—
		7	31	—
2	4	0	32	—				ü	ü
		1	33	—
		2	34	—
		3	35	Boemo ba polokeho Bit 0	Phahameng	Sheba tafole Boleng bo matha- ge Boemo ba Polokeho leqepheng la 41
		4	36	Boemo ba polokeho Bit 1	Phahameng
		5	37	—
		6	38	Tsebiso	Phahameng
		7	39	Sistimi ha e so lokisoe	Phahameng
	5	0	40	—
		1	41	—
		2	42	—
		3	43	—
		4	44	—
		5	45	—
		6	46	—
		7	47	—

Aterese				Letshwao	Mofuta oa ts'ebetso / data	Range	Ntlha	Sebetsa setšoantšo
mong ka			feletseng					Standard	Moruo
LENTSOE	BYTE	MOKHOOA	MOKHOOA
3	6	0	48	Ts'ebetso Bit 0	Phahameng	Sheba tafole Boleng Range bakeng sa Tshebetso Bit leqepheng la 41		ü	ü
		1	49	Ts'ebetso Bit 1	Phahameng
		2	50	Ts'ebetso Bit 2	Phahameng
		3	51	Ts'ebetso Bit 3	Phahameng
		4	52	Ts'ebetso Bit 4	Phahameng
		5	53	—
		6	54	Tšoara molomo oa khase	Phahameng
		7	55	Kamahanyo ya TWIN e sebetsa	Phahameng
	7	0	56	ExtOutput1 <= OPT_In- put1	Phahameng
		1	57	ExtOutput2 <= OPT_In- put2	Phahameng
		2	58	ExtOutput3 <= OPT_In- put3	Phahameng
		3	59	ExtOutput4 <= OPT_In- put4	Phahameng
		4	60	ExtOutput5 <= OPT_In- put5	Phahameng
		5	61	ExtOutput6 <= OPT_In- put6	Phahameng
		6	62	ExtOutput7 <= OPT_In- put7	Phahameng
		7	63	ExtOutput8 <= OPT_In- put8	Phahameng
4	8- 9	0-7	64-79	Welding voltage	UINT16	0.0 ho 655.35 [V]	100	ü	ü
5	10 - 11	0-7	80-95	Hona joale welding	UINT16	0.0 ho isa ho 6553.5 [A]	10	ü	ü
6	12 - 13	0-7	96-111	Lebelo la ho fepa ka terata	SINT16	-327.68 ho 327.67 [m/ mets]	100	ü	ü
7	14 - 15	0-7	112-127	Boleng ba sebele ba ho latedisa seam	UINT16	0 ho 6.5535	10000	ü	ü
8	16 - 17	0-7	128-143	Nomoro ea phoso	UINT16	0 ho 65535	1	ü
9	18 - 19	0-7	144-159	Nomoro ya tlhokomediso	UINT16	0 ho 65535	1	ü

Aterese				Letshwao	Mofuta oa ts'ebetso / data	Range	Ntlha	Sebetsa setšoantšo
mong ka			feletseng					Standard	Moruo
LENTSOE	BYTE	MOKHOOA	MOKHOOA
10	20 - 21	0-7	160-175	Motlakase oa hona joale oa M1	SINT16	-327.68 ho 327.67 [A]	100	ü
11	22 - 23	0-7	176-191	Motlakase oa hona joale oa M2	SINT16	-327.68 ho 327.67 [A]	100	ü
12	24 - 25	0-7	192-207	Motlakase oa hona joale oa M3	SINT16	-327.68 ho 327.67 [A]	100	ü
13	26 - 27	0-7	208-223	—				ü
14	28 - 29	0-7	224-239	—				ü
15	30 - 31	0-7	240-255	—				ü
16	32 - 33	0-7	256-271	Boemo ba mohala	SINT16	-327.68 ho 327.67 [limilimithara]	100	ü
17	34 - 35	0-7	272-287	—				ü
18	36 - 37	0-7	288-303	—				ü
19	38 - 39	0-7	304-319	—				ü

Kabelo ea Maemo a Sensor 1–4

Letshwao	Tlhaloso
Boemo ba kutlo 1	OPT/i WF R pheletso ya terata (4,100,869)
Boemo ba kutlo 2	OPT/i WF R moropa oa terata (4,100,879)
Boemo ba kutlo 3	OPT/i WF R ring sensor (4,100,878)
Boemo ba kutlo 4	Wire buffer set CMT TPS/I (4,001,763)

Kabelo ea maemo a sensor

Lethathamo la boleng Boemo ba polokeho

hanyane 1	hanyane 0	Tlhaloso
0	0	Reserve
0	1	Tšoara
1	0	Ema
1	1	Ha ea kengoa/e sebetsa

Boleng ba Boleng ba Ts'ebetso Bit

hanyane 4	hanyane 3	hanyane 2	hanyane 1	hanyane 0	Tlhaloso
0	0	0	0	0	Ha ho khetho ea ka hare ea parameter kapa ts'ebetso
0	0	0	0	1	MIG/MAG pulse synergic
0	0	0	1	0	MIG/MA synergic e tloaelehileng
0	0	0	1	1	MIG/MAG PMC
0	0	1	0	0	MIG/MAG LSC
0	0	1	0	1	Bukana e tloaelehileng ea MIG/MAG
0	0	1	1	0	Electrode
0	0	1	1	1	TIG
0	1	0	0	0	CMT
0	1	0	0	1	Constantine
0	1	0	1	0	ColdWire
0	1	0	1	1	DynamicWire

Boleng ba Boleng ba Ts'ebetso Bit

Boleng Range bakeng sa Boemo ba Mosebetsi

hanyane 1	hanyane 0	Tlhaloso
0	0	E sa sebetseng
0	1	Qetello
1	0	E felile
1	1	Phoso

Boleng ba maemo a tshebetso

• spareparts.fronius.com  
• At www.fronius.com/contact o tla fumana lintlha tsa ho iteanya le litšehetso tsohle tsa Fronius le Sales & Service Partners.Lipotso tse Akotsoang Hangata

Nka rarolla matšoao a boemo ba LED joang?
Haeba LED MS e hotelitsoe ka bofubelu, e bontša phoso e kholo. Haeba e panya ka bofubelu, e bolela phoso e ka lokisoang. Bakeng sa LED NS, lebone le khubelu le ka bontša aterese ea IP e habeli kapa phoso e matla ea marang-rang.

Li-parameter tsa tlhophiso tsa kamehla tsa mojule oa libese ke life?
Mekhahlelo ea tlhophiso ea kamehla e kenyelletsa ID ea Morekisi: 0534hex, Mofuta oa Sesebelisoa: Adapter ea puisano, Khoutu ea Sehlahisoa: 0320hex, Lebitso la Sehlahisoa: Fronius FB Pro Ethernet/IP-2-Port.

Litokomane / Lisebelisoa

Fronius RI MOD Compact Com Module [pdf] Buka ea Taelo RI MOD Compact Com Module, RI MOD, Compact Com Module, Com Module, Module

Litšupiso

• Bukana ea Mosebelisi