Pulse Series Controller Pulse Red

PUSO
Commercial Direct Drive Door Operator bakeng sa Balanced Sectional and Rolling Steel Doors. Buka ea ho kenya le Litaelo tsa ho Seta/Mosebelisi
US Patent No. 11105138
Ho fumana lintlha tse ling, ka kopo ikopanye www.devancocanada.com kapa letsetsa mahala ho 1-855-931-3334

KAKARETSO KHAHLISOVIEW

Rea leboha ha u rekile opareitara ena ea Pulse Direct Drive Door. Opereishene ena e tšepahalang e etselitsoe mosebetsi o tsoelang pele bakeng sa Monyako oa Khoebo oa hau mme e ka lelefatsa bophelo ba lemati la hau la karolo e leka-lekaneng ka bokhoni ba eona bo kopaneng ba ho qala / ho emisa ha bonolo.
E boetse e na le lebelo le feto-fetohang la ho bula hoo e ka bang 24 "ka motsotsoana, "backup" ea betri e ka tsamaisang lemati haeba motlakase o ka senyeha, ts'ireletso ea morao-rao, le ts'ebetso e feto-fetohang ea "auto-reversing force", hammoho le mesebetsi e meng e mengata e ka khonehang.
THE PULSE 500-1000 SERIES KE UL325:2023 E LENGWA – TLHOKOMELISO MABAPI LE TELAELO
Li-Operators tsena li fuoa Polarized Reflective Photo-Eye, e hoketsoeng ho Terminal 1 ea 'Reversing Devices' ho Phanele ea Taolo (Thru-Beam Photo-Eye on 1HP & -WP Models to Terminal 2). Hang ha konopo ea Koala e kentsoe, opareitara e netefatsa hore Photo-Eye e hokahane ebile e sebetsa, 'me e tsoela pele ho beha leihlo sensor ha lemati le koala.
Theminale e inehetseng (Terminal 2 Reversing Devices) e fanoe hore e sebetse le Monitored Reversing Devices.
Kenyelletso (Terminal 3 Reversing Devices) bakeng sa lisebelisoa tse sa shejoeng tsa ho khutlisa (ke hore, moeli o tloaelehileng oa pneumatic).
Pulse Operator e tla qala Push/Sight to CLOSE protocols haeba e sa fumane sesebelisoa sa ho khutlisa se sebetsang ho Terminal 1 kapa 2. Ha ho le e 'ngoe ea li-terminals e ka fetisoang kapa ea 'tlola'. Hlokomela hore nakong ea Push/Hold to Close protocols, lemati le tla khutlela morao haeba le sa fihle ka botlalo moeling o koetsoeng ka UL 325.

LEbokose LEBAKA

Pele o qala ho kenya, ka kopo netefatsa hore likarolo tsohle li tlalehoa:

1. Motor, Gearbox, Encoder, Junction Box Assembly
2. Lekhotla la taolo
3. Moeli oa Li-brackets le Hardware (Angle Brackets for Stop Limit hore e behoe lipineng tsa mamating)
4. Torque Arm, Liboutu tse Mountang, Bracket e Hlollang
5. Shaft Collar le Shaft Key
6. Sesebelisoa sa ho Khutlisa - Leihlo la Reflective (Thru-Beam Photo-Eye e kenyellelitsoe ho 1HP & -WP Models)
7. Li-betri tse peli tsa 12V, tse ka tjhajoang hape tsa asiti ea lead

Haeba e 'ngoe ea lintho tse ka holimo e le sieo, ka kopo ikopanye le iControls 'me u re fe lintlha tsa likarolo tse sieo, hammoho le nomoro ea serial ea opareitara ea hau.

MOSEBETSI TS'OANELOVIEW

Motor

Matla a Lipere:	Pulse 500 = 1/2 HP	Pulse 750 = 3/4 HP		Pulse 1000 = 1 HP
LEBELO:	1750 RPM
HONA JOALE (FLA):	1/2 HP = 5A	3/4 HP = 7.6A		1 HP = 10A
OUTPUT TOQUE:	Pulse 500-1:	30:1=55.3Nm	40:1=73.7Nm	50:1=92.2Nm	60:1=110.5Nm
	Pulse 750-1:	30:1=55.2Nm	40:1=73.6Nm	50:1=92.2Nm	60:1=110.5Nm
	Pulse 750-1.25:	30:1=55.3Nm	40:1=73.7Nm	50:1=92.1Nm	60:1=110.5Nm
	Pulse 1000-1:	30:1=73.6Nm	40:1=98.2Nm	50:1=92.1Nm	60:1=147.3Nm
	Pulse 1000-1.25:	30:1=73.7Nm	40:1=98.2Nm	50:1=122.8Nm	60:1=147.4Nm

Motlakase

PUSELETSO VOLTAGE:	110-130 kapa 208-240V Vac, 1ph Input (Matla ohle a kenang a tla hokeloa ka lebokoseng la mateano le fanoeng)
LITLHAKU TSE KHOLO:	½ HP= 2 x 5Ah, ¾ HP= 2 x 7Ah, 1 HP= 2 x 9Ah
TAOLA MOLELETAGE:	24Vdc, 1A Power/Connections e fanoeng bakeng sa ho kenya tšebetsong le ho khutlisa lisebelisoa
AUX RELAY:	1 SPDT Programmable Relay (fektheri ea kamehla ea ho kenya tšebetsong Meeli e Bulehileng)

Polokeho 

SENSOR EA PHOTO-EYE kapa THRU-BEAM:	Polarized Photo-eye Sensor/Reflector e nang le Bracket kapa Thru-Beam sensor e fanoang ka yuniti e le ts'ireletso e se nang phello ea sesebelisoa.
MATLA OUTAGOPERATIONS:	Backup ea Betri ho bula/ho koala lemati haeba ho ka ba le matla-outage. 3/8 ”ratchet sokete bakeng sa crank e butsoeng / koala ha e ntse e eketseha.

Ka kopo, sheba ho rona Websebaka sa Maximum Recommended Counter Balance Sectional Door Sizes le Weights bakeng sa Opereishene ka 'ngoe (www.iControls.ca).

BOHLOKOA
TLHOKOMELO - Litaelo tsena li etselitsoe basebetsi ba nang le boiphihlelo ba koetliselitsoeng litšebeletso le ho kenya mamati a likarolo le li-operators. Mehato eohle ea tšireletso le likhoutu tsa lehae li tlameha ho lateloa.

1. BALA LE HO LATELA DITAELO TSOHLE TSA HO KENYA.
2. Etsa hore basebetsi ba hloahloa ba etse litokiso tse hlokahalang ho netefatsa hore monyako o sebetsa hantle ntle le lerata le sa tloaelehang. Kenya opareitara feela monyako o sebetsang hantle le o leka-lekaneng hantle.
3. Ntsha dithapo tsotlhe tse di gogang mme o tlose dilotlolo (ntle le fa e se ka motšhine le/kgotsa ka motlakase o gokeletsweng mo yuniting ya motlakase) tse di gokeletsweng mo lebating pele o tsenya opareitara.
4. Mokhanni oa menyako ea khoebo/ea indasteri e pepesitseng likarolo tse tsamaeang tse khonang ho lematsa batho kapa ea sebelisang koloi eo ho nkoang e sa fihlellehe ka tsela e sa tobang ke poleloana ea 10.6 ho latela sebaka seo e leng ho sona kaholimo ho mokato o tla kenyelletsa:
   a. Kenya opareitara ea monyako bonyane 2.44m (8 ft) kapa ho feta ka holim'a fatše: kapa
   b. Haeba opareitara e tlameha ho kenngoa ka tlase ho 2.44m (8ft) ka holim'a fatše, joale likarolo tse tsamaeang tse pepeneneng li tlameha ho sireletsoa ka likoahelo kapa ho lebela; kapa
   c. Ka bobeli a. le b.
5. Se ke oa hokela opareitara ho matla a phepelo ho fihlela o laetsoe ho etsa joalo.
6. Beha seteishene sa taolo: (a) haufi le lemati, le (b) bonyane bophahamo ba 1.53m (5 ft) ka holim'a mekato, litulo, litepisi, kapa sebaka sefe kapa sefe se haufi sa ho tsamaea le (c) hole le tsohle tse tsamaeang. likarolo.
7. Kenya Lepolanka la Temoso la Entrapment haufi le seteishene sa taolo sebakeng se hlahelletseng.

LITLHAKISO TSA PELE HO KOPANO

PELE O E KENYA, TIISETSA HORE LENYAKO LA HAO LE LEKELETSO KA NTLE LE HO TSAMAEA KA BOKO. HAPE KHOETSA HORE LIBAKA TSA LIMITED BRACKETTS (TSE FUMANEHANG) LI KEntsoe LE HO SIRELETSOA KA NTLE. LI-BUMPER/PUSHER SPRINGS LI KA SEBEDISWA SEBAKA SA, KAPA HO PHATLALATSOA LE LIBAKA TSA MOEDI BATHO BA SEBELISA MOHOLO, EMPA EMPA E TSHWANETSE HO KEnywa PELE HO TSHEBETSA.
Litlhoko tsa ho beha opereishene
Basebelisi ba pulse ba kenngoa ka ho toba monyako oa monyako. Pele o kenya opareitara, ka kopo etsa bonnete ba hore lintlha tse latelang li fihletsoe:
Monyako o leka-lekane hantle, o lekoa bakeng sa ho sebetsa hantle ntle le lerata le sa tloaelehang.
Li-brackets tse Fanoeng tsa Limit li tlameha ho kengoa bonyane 2″ sebaka se bulehileng se lakatsehang sa monyako (le ka har'a bophahamo bo lumelletsoeng ba cable) ho thibela mamati ho tsamaea ho feta tekano. (Sheba setšoantšo sa 1)
Lemati le na le shaft e tiileng e kentsoeng ka bolelele bo tlase ba 4.5 ”ka lehlakoreng la opareitara.Ho hlaka bonyane 12" ka holimo ho tloha lehlakoreng la lemati (kapa 9" ho tloha qetellong ea shaft), le 24" ka tlase ho sefate. Ho na le sebaka se lekaneng sa ts'ehetso sa meralo ho kenya ka mokhoa o sireletsehileng bracket ea ho kenya letsoho la torque, letsoho la torque le lebokose la mateano. Bakeng sa lintlha tse ling, bona litaelo tsa ho kenya mounting Fig: 1 & 7.
Sebaka sa ho phahamisa bakeng sa Panel ea Taolo ea opareitara (Min. 5 ft. ho tloha boemong ba fatše, ka har'a pono e hlakileng ea lemati empa e le hōle ka ho lekaneng ho thibela basebelisi ho kopana le likarolo tse tsamaeang).Sebaka sa Moupong sa Opereishene/Encoder
Opereishene ena e na le encoder ea boemo ba eona e kentsoeng ka holim'a lebokose la gear. Sena se lumella ho hlongoa ha opareitara kae kapa kae ka bolelele ba shaft moo sebaka se lumellang. Maemo a ka ho le letona, a leqeleng kapa a bohareng kaofela a amoheleha, 'me ha ho litokiso ho opareitara, kapa software ea opareitara, e hlokahalang.
Ho kopanya Torque Arm ho Gearbox
Letsoho la torque le tlameha ho bokelloa ka lebokoseng la gear ka lehlakoreng le leng la encoder le sebelisa liboutu tse 4 tse kentsoeng. Ho na le libaka tse 6 tse ka khonehang bakeng sa letsoho la torque, 'me boemo ba eona bo nepahetseng ba ho hlongoa bo lokela ho reroa esale pele pele ho kopano. Tiisa liboutu ka nepo. LERUMO LA TOQUE KE KAROLO E KA HAROLO EA TŠEBELETSO LE TSEBETSI EA Opereishene 'me E LOKELA HO KEnngoa KA BOLOKEHI. Sheba setšoantšo sa 4Sheba setšoantšo: 4 A bakeng sa likhothaletso mabapi le mokhoa oa ho beha Torque Arm ho Operator / Mounting Bracket mabapi le Shaft Off-set.

TOQUE Arm POSITION MABAPI LE OPERATOR

HLOMELA LITS'ELISO LITEKO

TLHOKOMELO

• HO Fokotsa KOTSI EA HO ITŠOA KAPA HO SHOA, U SE KE UA HOKETSA MATLA A MOTLATSI HO FIHLELA OPERATOR E FELELE, LEbokoso la JUNCTION LE PANEL EA TAOLI LI KENYA, HO SIRELETSOA LE HO SIRELETSOA HO LATELA LITAELO TSE LATELANG.
• SEBELISA HORE SEBAKA SE HLAKILE HO BASEBETSI LE HO TENG HO FIHLELA HO FUMELLA HA U KENYA OPERATOR.
• SEBELISA LIPROTOKOLE TSE NEPAHETSENG TŠEBELETSO HO LATELA LIHLOKO TSA KA HARE, LEHAE LE TSA 'MUSO.

TLHOKOMELISO MOHATO OA PELE - Moeli oa ho kenya Bracket
Haeba lemati la hau le se le ntse le e-na le liliba tsa bumper / pusher, hoa hlokahala ho kenya Li-Brackets tse fanoeng. Beha borakete e le 'ngoe tlhōrōng ea pina e' ngoe le e 'ngoe (Sheba setšoantšo sa 1A) ho thibela ho tsamaea ho feteletseng ha lemati, 'me u nolofatse mokhoa oa ho lokisa mochine o ikemetseng pele o beha meeli le ka mor'a ho lahleheloa ke matla. Tsena li lokela ho kenngoa ka har'a lipilara tsa mamati sebakeng se phahameng se lumelletsoeng sa ho tsamaea, 'me ho hlokahala hore li behoe sebakeng se ts'oanang hantle litseleng ka bobeli e le hore lirolara tse ka holimo tsa mamati li lule li le boemong bo lekanang.
Ho kenya, ka letsoho bula lemati ho sebaka se ka holimo sa ho bula se lumelletsoeng ke likhoele, clamp monyako sebakeng, 'me u boloke li-brackets ho pina joalokaha ho bontšitsoe Setšoantšo sa 1A u sebelisa li-rollers tse ka holimo e le lintlha tsa litšupiso tsa li-brackets.
HA HO NA LE BUMPER/PUSHER SPRINGS, HO KENYA MABAKA A MELITE KE TLAMELO PELE HO KENYA OPERATOR. KA NTLE LE MEELI EA ’MELE, LENYAKO LE KA TSOA TSELA EA LONA LE HO BAKA HO LETSAHATSA HAHOLO LE/KGOTSA HO BAKA TŠENYEHO E HAHOLO LENYATI. HO EKETSEHILENG, U TLA HLOA HO BEHA MEELI.

Ho kenngoa ha Shaft Collar / Bent Key
Shaft Collar e sebetsa e le sebaka sa ho emisa bakeng sa senotlolo se kobehileng ho thibela hore e se ke ea thella ka ntle ho lebokose la gear. Ho bohlokoa hore e tlameletsoe ka mokhoa o sireletsehileng pele o sebelisoa, 'me e hloka ho kenngoa hammoho le senotlolo joalokaha ho bontšitsoe setšoantšong: 5. Lokisa lemati hore senotlolo sa shaft se shebane le holimo (o ka tlameha ho bula/wedge/clamp lemati le buleha hanyane ho fihlela sena).
Lokolla sekoti sa Shaft Collar set 'me u se thelle holim'a shaft.
Kenya senotlolo se kobehileng (ho fanoe ka opareitara) ka har'a senotlolo sa lemati moo ntlha e kobehileng e shebaneng le khola ea shaft sebakeng seo e se batlang.
Tsamaisa molala morao e le hore o ka ama senotlolo, bona Setšoantšo: 5. Tiisa ka tieo sekoti se behiloeng sa molala holim'a shaft. Tlamella Torque Arm lebokoseng la gear hore e tle e shebane le molala oa shaft ha e kenngoa le sebakeng se loketseng joalo ka ha ho khothalelitsoe ho Feiga: 4A.
Ka kopo hlokomela hore ho ka 'na ha hlokahala hore ho lokisoe boemo ba senotlolo le molala bakeng sa ho kenya letsoho le ho tiisa torque.

Ho kenya Opereishene
TLHOKOMELO
TLHOKOMELISO: KOPANO YA OPERATOR E boima, 'me E KA BAKA KOTSI E MAHALA KAPA LEFU LE KA LAHLWA KA NAKO YA HO KENYA. TSEBA LITEKELO TSOHLE TSE HLOKAHANG HO QOBA HO THEHELA OPERATOR (Ke hore, TETHER/TLAFATSA) PELE HO LEKELA HO KENYA. SCAFFOLDING KAPA SCISSOR-LIFTS/ PLATFORM-LIFTS E ELETSWA BAKENG SA HO KENYA OPERATOR. Le ka mohla U SE KE UA LEKA HO KENYA OPERATOR KA HOLIMO HO TSAMAYA KA LEIHLO KAPA HO TLOHA LESIRI.
SEBELISA HORE MEHATO E FETILENG EA SHAFT COLLAR/KEY KEY E LATEETSOE KA NTLE HO SEBELISA. HO HLOLEHWA HO ETSA SO HO KA BELLA TŠENYEHO HO MOHOLO KA NAKO EA HO KENYA OPERATOR.
Lokisetsa senotlolo sa lebokose la gear le senotlolo se kentsoeng pele (sheba Key Shaft Collar / Key Installation leqepheng le fetileng) e ka lehlakoreng le ntseng le phahama la shaft.
Thelelisa lebokose la gear holim'a shaft ho fihlela e kopana le kobeho ea Shaft Key.
Kopanya Torque Arm Bracket ho letsoho la Torque u sebelisa sekontiri se fanoeng. HLOKOMELA: U SE KE U TIISA NAKO KA PHETHAHETSO). Anchor Torque Arm Bracket ho tšehetso e tiileng ea sebopeho.
Tlamella letsoho la torque ho ts'ehetso ea meralo ka bolt e fanoeng, linate tse notlelang le liwashara. Ho ka hlokahala bracket e fanoeng. Haeba letsoho la torque le sa ikamahanye le ts'ehetso ea sebopeho, u ka leka ho lokisa boemo ba letsoho la torque lebokoseng la gear (sheba Assembling Torque Arm to Gearbox) ho latela kapa sebelisa Torque Arm Bracket.HO HLOLEHWA HO SEBELISA LETSOHO LA TORQUE KA SIRELETSO HO KA BALA KA TŠENYEHO, LIKOTSI TSE HLOKO KAPA LEFU 'me HO TLA HLAKELA TSEBE.

Junction Box Mounting
Lebokose la mateano le na le li-terminals bakeng sa likhokahano tsa matla, hammoho le likhokahano tsa betri / tsa puisano bakeng sa phanele ea taolo. Beha lebokose la li-junction, ka li-flange tse ntseng li phahama le ho ea ka khoutu ea motlakase, sebakeng se hlakileng se tla fana ka phihlelo ea matla a motlakase le li-control panel wiring connections. Lebokose la mateano le kentsoe pele ka maoto a 2 a khoele e tenyetsehang, haeba ho hlokahala bolelele bo bolelele, buisana le feme. Se ke oa hloma lebokose la mateano haufi le likarolo tse tsamaeang kapa sebakeng seo ho seng bonolo ho fihla ho sona.Control Panel Mounting
Sehlopha sa taolo se lokela ho behoa ka mokhoa o sireletsehileng sebakeng sa leihlo kapa ho pota-pota (bonyane 5 ft. Netefatsa hore phanele ea taolo e behiloe hole hole le lemati ho qoba ho kopana le lemati ha e ntse e sebetsa, empa e koalehe hoo mosebelisi a hlakileng. view ya monyako ka nako tsohle. Ho fanoe ka li-brackets tse 'nè (4) tse laolang ho thusa ho kenya letsoho. Sheba setšoantšo sa 8Ho phahamisa Sensor ea Photo-Eye kapa Thru-Beam
Sensor e kenyellelitsoeng ea foto-leihlo kapa thru-beam e lokela ho hlongoa e le hore e hlahlobe sebaka se bophara ba lemati ka bolelele bo sa feteng lisenthimithara tse 6 ho tloha fatše. Sensor (reflective photo-eye) kapa receiver (thru-beam) e lokela ho behoa ka lehlakoreng la opareitara (kaha e tla hokeloa ka har'a phanele ea taolo), ha sebonela-hōle kapa transmitter e lokela ho beoa ka lehlakoreng le leng la lemati, e shebaneng le sensor/receiver e le hore setsi sa sona se kopane le sehlahisoa. Sebelisa borakete e kenyellelitsoeng ho tiisa hore na e ka ba lifensetereng tsa mamati kapa leboteng. Sheba lintlha tse khethehileng tsa ho kenya tse fanoeng ka sensor. Bakeng sa ho lumellana ha ho qetela ha sensor, kenya yuniti ho STARTUP MENU (sheba leqephe la 18) ho sebelisa matla ho sensor (kamora WIRING - bona leqephe la 13 bakeng sa setšoantšo se eketsehileng sa wiring). Ha e se e hokahantsoe hantle ho STARTUP MENU, letšoao le tla khantša ho netefatsa. Hlokomela hore ha o tsoa ho STARTUP MENU, kutlo e tla sebetsa feela ha lemati le koaloa.
Sheba setšoantšo: 9 bakeng sa litšupiso tse ntseng li eketseha.

LIEKETSENG LITS'OANELO

TLHOKOMELO
HO FOKOTSA KOTSI EA HO ITŠOA KAPA HO SHOA, HO BONAHALA HORE E LATELA LITEBELO TSE LATELANG PELE HO ETSA LIKHOKELO TSA MOTLATSI:

1. Tlosa motlakase lebokoseng la fuse / mohloling 'me u latele ho koala ka nepo/tag- mekhoa ea ho tsoa ho latela likhoutu tsa motlakase tsa naha le tsa lehae.
2. Netefatsa hore likhokelo tsohle tsa motlakase li etsoa ke litsebi tsa motlakase/litsebi tse koetlisitsoeng feela le ho kopana le likhoutu tsa motlakase tsa naha le tsa lehae.
3. Lithapo tsohle li lokela ho ba sebakeng se ikhethileng 'me li sirelelitsoe hantle.

Lihokelo tsa Lebokose la Junction
Li-terminals tse ka har'a lebokose la mateano li ngotsoe 'me li fanoa bakeng sa matla a ho kenya (100-240Vac 1 Ph), le ho hokahanya matla a polokelo ea betri, le ho fana ka matla a tlaase.tage matla le puisano bakeng sa sehlopha sa taolo. Li-terminals tsa boikhethelo li boetse li fanoe bakeng sa khokahanyo ea Fully Open Limit Reset to switch ea kantle e le mokhoa o mong oa ho sebelisa Limit Brackets e le seta botjha bakeng sa encoder.
Lihokelo tsa Matla (100-240Vac Single Phase)

1. TIISETSA MATLA A KHAOTSOE!
2.  Tsamaisa lithapo tsa motlakase ho ea lebokoseng la mateano ho latela melao ea lehae le ea naha.
3. Hokela matla a kenang ho L/L1 le N/L2, 'me u netefatse hore terata ea fatše e khomaretsoe ka nepo.

Lihokelo tsa Panel ea Taolo (24Vdc)

1. U sebelisa bonyane ba thapo ea 18AWG, hokela lithapo tsa motho ka mong ho li-terminals tsa V+, GM, GS le COM lebokoseng la mateano. iControls e khothalletsa ho sebelisa wiring kit (Karolo # PDC-CABKIT) kapa e lekanang le eona.
2. Tsena li tla bapisa likhokahano tsa Panel ea Taolo 'me li tla felisoa ka tatellano e ts'oanang (joalo ka ha e ngotsoe) ho ts'oana le lebokose la mateano (lithapo tsohle tsa taolo li tla kena ka tlase ho sebaka).

Lihokelo tsa Battery (24Vdc) Libetri tse 2 tse hoketsoeng ka Letoto

1. Ho sebelisa bonyane 18 AWG terata e insulated; hokela ho B+ le B- ka hare ho lebokose la mateano (lithapo tse peli tse arohaneng). TLHOKOMELISO: 14AWG e khothaletsoa bakeng sa Basebelisi ba PULSE 1000.
2. Lithapo tsena li lokela ho tsamaisoa hammoho le Khokahano ea Panel ea Taolo (ka tlase ho sebaka se koaletsoeng) 'me li hokahane le liteishene tsa '+' le '-'DRIVE botong.
3. Beha betri ka har'a "Panel Control". Hokela lithapo ho libeteri: loto e khubelu e hokela lipakeng tsa 'Battery +' tab e botong le konopo e khubelu holim'a betri, lead lead e 'mala o moputsoa pakeng tsa' Battery -' tab e botong le konopo e ntšo holim'a betri.

Likhokahano tsa Phetoho ea Limit tse Bulehileng ka Botlalo (24Vdc)(Boikhethelo H1 & H2 Theminale)

1. Ho sebelisa bonyane 18 AWG terata e insulated; hokela ho H1 le H2 ka har'a lebokose la mateano (lithapo tse peli tse arohaneng)
2. Hokela lithapo tsena ka NO Contact of Limit Switch, Proximity Sensor, Reed Switch, joalo-joalo, e hlophiselitsoeng ho qala moeling o holimo oa monyako. Sena se sebelisoa pele ho meeli ea ho emisa (li-brackets tsa moeli) ho seta encoder qalong kapa ho seta menu bocha (boemo bo butsoeng ka botlalo) le ho qoba lirolara hore li kopane le masakaneng. E boetse e sebelisoa e le li-setting tsa boemo ba Bula ka Botlalo ho Menu. Hlokomela hore ho kenya li-brackets tsa moeli (kapa sesebelisoa se seng sa ho emisa) ho ntse ho tlamehile e le sebaka sa tšireletso se sa hlokahaleng haeba ho ka khoneha, empa se ka behoa morao ho tloha ho switjha ho qoba tšusumetso ea rolara. Haeba o sebelisa switch ea ka ntle sebakeng sa li-brackets tsa moeli bakeng sa Fully Open Position Reset, ho tlameha ho fetoloa litlhophiso tsa menu. Sheba Leqephe la 23.

Control Panel Board Connections
Phanele ea Taolo e fana ka matla le lintho tse kenyelelitsoeng bakeng sa Lisebelisoa tsa hau tsa ho Khutlisa (ho fihla ho 3), Lisebelisoa tsa ho Bula (ho fihla ho 2), hammoho le Seteishene sa Push Button e nang le terata, le Remote Radio Receiver. Li-relay tse peli tse holim'a board li fana ka lipontšo bakeng sa likhetho tse fapaneng tse ka khonehang. Likhokahano tse ling li teng bakeng sa Lipontšo tsa Sephethephethe, molumo oa molumo le lets'oao la Amber le benyang (ha lemati le ntse le sisinyeha) le senotlolo sa senotlolo sa lemati (se thibelang lemati ho tsamaea ha le butsoitse). Ho boetse ho fanoe ka sets'oants'o sa lisebelisoa tse se nang mohala tsa IControls (sensor ea tšusumetso/tilt, moeli o khutlelang morao, joalo-joalo).
Lisebelisoa tsa ho khutlisa
Pulse e amohela UL325 Monitored Devices, hammoho le Lisebelisoa tse tloaelehileng tse sa laoloeng. Hokela foto-leihlo le fanoeng ho theminale e ngotsoeng '1'. Sesebediswa sefe kapa sefe sa UL325 se kgutlelang morao se lokela ho hokelwa ho theminale e ngotsweng '2'. Mahlo afe kapa afe a mang a kenyelitsoeng ka morao a foto-mahlo, likharetene tse khanyang le mahlakore a khutlelang morao li lokela ho hokeloa ho theminale e ngotsoeng '3'. Latela litšoantšo tsa lithapo tse kenyellelitsoeng bukeng ena, le litaelo tsa ho instola tse fanoeng le sesebelisoa sa hau sa ho khutlisa bakeng sa lintlha tse ling tsa ho hokela le ho hokela. Ka kopo elelloa hore ntle le sesebelisoa se hokahaneng, se sebetsang sa ho khutlisetsa morao ho R1 kapa R2, Lits'ebetso tsa ho koala Nako ea ho Koala le Single Push tsa lemati ha li sebetse - ho tla qalisoa liprothokholo tsa Push/Hold to Close.
Lisebelisoa tsa ho kenya tshebetsong
Lisebelisoa tse itirisang, tse nang le lithapo, joalo ka Floor Loop Detectors, Pull Cords, Motion Detectors le Photo-Eyes (ho fihla ho lisebelisoa tse 2 tse sebelisang terata) tse sebelisoang ho bula lemati li hoketsoe mona. Latela setšoantšo sa lithapo se ka tlase 'me u shebe litaelo tse fanoeng le sesebelisoa sa hau sa ho kenya tshebetsong bakeng sa kgokelo e nepahetseng le lintlha tsa ho hloma. Hlokomela hore lisebelisoa tsohle tse hokahantsoeng ho terminal ea A1 li tla bula lemati la boemo bo batlang bo le boemong bo felletseng, 'me lisebelisoa tse hoketsoeng ho terminal ea A2 li tla bula lemati la moeli o behiloeng.
Tobetsa Konopo Station
Hokela seteishene sa Konopo sa Push lehlakoreng le leng la lemati la hau u sebelisa lintho tsena tse kentsoeng. HA HO mabitso a omileng a hlokahalang. Hlokomela hore Push Button Stations e ka hlophisoa hore e phahamisetse lemati sebakeng se bulehileng ka botlalo kapa se behiloeng moeling. Sheba setšoantšo sa wiring bakeng sa lintlha tse ling tsa khokahano. Push Button Stations lia fumaneha ho tsoa ho RW, ka kopo ikopanye le rona bakeng sa lintlha.
Radio e hole
Hokela moamoheli oa hau ho li-terminals tse fanoeng - kaha sebaka se koaletsoeng sa "Pulse control panel" ha se tšepe, "antenna" ea kantle ha e hlokehe. Hlokomela hore Remote Radio e ka hlophisoa hore e phahamisetse monyako hore o bulehe ka botlalo, kapa o behe moeli oa boemo. Sheba setšoantšo sa wiring bakeng sa lintlha tse ling tsa khokahano. Li-transmitters le li-remote radio li fumaneha ho tsoa ho iControls, ka kopo ikopanye le rona bakeng sa lintlha.
Senotlolo sa Lemati
Li-terminals tsena li teng bakeng sa ho koala tšebetso ea mamati, ebang ke switch e bonolo, kapa sensor e fanang ka lets'oao ha lemati le notletsoe bosiu. Khetho e 'ngoe e teng ke ho hokela sena ho relay ea nako e hlophisitsoeng ho lumella ts'ebetso ea mamati bakeng sa kemiso e reriloeng esale pele. Sheba setšoantšo sa wiring bakeng sa lintlha tse ling tsa khokahano. Ikopanye le IControls bakeng sa tlhahisoleseling mabapi le Sensor Kit ea bona ea Door Lock.
Leseli la Sephethephethe
Ho kenya setopo sa LED le ho khanya, sebelisa li-terminals tse fanoeng ka tlaase ho boto. Bofubelu bo hokela ho theminale ea 'R', botala bo hokela ho theminale ea 'G' 'me e tloaelehileng e lokela ho hokeloa ho theminale ea '+24'. Netefatsa hore o sebelisa mabone a sephethe-phethe a LED (eseng incandescent) a sa feteng 100mA. Lebone la sephethephethe le tla lula le le khubelu ha lemati le ntse le sisinyeha kapa le koetsoe, 'me le tla ba le letala sebakeng se bulehileng ka botlalo feela. Bofubelu bo ka boela ba hlophisoa hore bo benye ha lemati le ntse le sisinyeha, le pele ho koaloa ha ho sebelisoa sebali se koalang (Sheba Leqephe la 22 bakeng sa lintlha tse ling). Theminale ea 'Y' ke ea lebone la bobeli le benyang la Amber LED le/kapa lets'oao le utloahalang ho bontša ha lemati le ntse le sisinyeha. Ha u ntse u kena ho Setup Menu, mabone a litsela a tla tima, 'me lebone la Amber, haeba le kentsoe, le tla benya. Mabone a LED Stop and Go a tsoang ho IControls a khothaletsoa haholo, ka kopo ikopanye le rona bakeng sa lintlha. Sheba setšoantšo sa wiring bakeng sa lintlha tse ling tsa khokahano.
Tlhokomeliso: U SE KE UA SEBELISA MATŠOAO A HLOKOMANG LE MOSEBETSI OA. LESOA FEELA.
Lihokelo tsa Relay ea Output
Likhokahano tsa NO le NC relay li fanoa bakeng sa ho hokahana le lisebelisoa tse ling tsa ho sebetsana le thepa (ke hore, mochini o tsamaisang thepa ea boema-kepe) kapa lits'ebetso tsa ts'ireletso / mollo. Liphetho tsena li ka hlophisoa (sheba Output Relay Setup) ho matlafatsa ha lemati le le Moeding o Butsoeng kapa o Koetsoe. Sheba setšoantšo sa wiring bakeng sa litaelo tse ling.

LIEKETSENG MAKHOPO

Sehlopha sa Taolo bakeng sa Mehlala ea 500, 750 & 1000KHETHO TS'EBETSO LITS'ELISO
HLOKOMELA: 

1. HA SETEishene sa PUSH BUTTON ES KHOPOTSOA, TLOSA JUMPER E KENtsoeng FACTORY PAKENG TSA (+24) LE (S) TERMINALS.
2. MONYAKO (A1) O BULA MONYAKO KA PHETHAHETSENG, HO TLANYA A2 HO BULA MONYAKO KA LIMIT EA SET.
3. REMOTE RADIO LE PANEL PUSH BUTTON KE MENU E KA RE THUTOANG HO BULA LENYAKO KA FELLO KAPA KA MOEDI O O BEHANG.
4. HAEBA SEBAKA SA HO TLOA SE BEHETSWE HO ZERO TSOHLE “OPEN” ACTIATORS E SEBETSA MOSEBETSI OA BULENG

LIKHETHONG THUSOKHETHO FETISISA LITS'OANELINTLHA TSEO: Hokela Lisebelisoa tse Reversing tse sa Lekoeng ho R3 ho phaella ho sesebelisoa se sebetsang se hoketsoeng ho R1 kapa R2. Ebang o sebedisa Monitored Reversing Device ho R2, R1 e tlameha ho hokelwa ho sesebediswa se sebetsang kapa e tlolwe ka P+.SHEBELLA 2-WIRE KA-BEAM SENSOR VITECTOR RAY-N
Setšoantšo sa WiringHLOKOMELISO EA 2-WIRE KA-BEAM SENSOR VITECTOR OPTOΕΥΕ (ΝΕΜΑ 4Χ)
Setšoantšo sa Wiring

TS'ELISO MOKHOA

TLHOKOMELO!
Pele o sebelisa matla ho opareitara ea Pulse, etsa bonnete ba hore yuniti e eme ka thata holim'a shaft ea lemati mme e tlameletsoe ka mokhoa o sireletsehileng letsohong la torque / bolt. Hape le hore Li-brackets tsa Limit li teng le hore "encoder" e tlameletsoe hantle ka lebokoseng la gear.
TEKO MONYAKO TŠEBELE 
MOHATO ENA O TSHWANETSE HO ETSWA PELE MATLA A KGONGWA.
Pulse opareitara e reretsoe ho sebelisoa feela ka mamati a leka-lekaneng. Menyako e sa leka-lekaneng hantle e ka ama ts'ebetso ea opareitara haholo. Re khothaletsa hore hang ha lemati le opareitara li kentsoe ka botlalo, o leke ho leka-lekana ha lemati pele o ka tima.
Ho etsa sena, etsa bonnete ba hore li-betri li hokahane, matla a tima, 'me u leke ho ea holimo le tlase tlas'a matla a betri (tobetsa le ho tšoara konopo ea OPEN, ebe o tobetsa le ho tšoara konopo ea CLOSE). Lemati le lokela ho tsamaea butle, lebelo le tsitsitseng ho ea holimo le tlase. Haeba lemati le ka fumana potoloho e felletseng tlasa matla a betri, le seta ka nepo hore le sebelisoe le opareitara ea Pulse. Haeba betri e sa khone ho tsamaisa lemati ka tsela efe kapa efe ka botlalo, tsitsipano ea selemo lemating e tlameha ho lokisoa.
MATLA MATLA
Kenya matla ho yuniti. The Control Panel LED Screen e lokela ho khantša le ho iketsetsa boitlhahlobo. Haeba skrini sa LCD se sa bonesoa, sheba ho Trouble Shooting leqepheng la 25. Hang ha se se se qetile ho itlhahloba, skrine se tla baleha 'Door is Ready'. U SE KE UA LEKA HO BULA LENYAKO KAMOR'A HO PHETHA MATLA A TELE - ACCESS StartUP MENU FEELA!

QALA MENU LE HO FUMANA LIKHETHONG TSOHLE TSA MENU
ELA HLOKO HORE LIPEHAKANTSO TSOHLE TSA MENU YA FACTORY LI COMPOTSOE BAKENG SA MNYATI FEELA. CONTACT ICONTROLS BAKENG SA SETTINGSTO TSA METHO E MING YA MMATTI (ke hore Rolling Steel, jj.) Bakeng sa ho fihlella STARTUP MENU tobetsa 'me u hatelle konopo ea STOP FOR 10 SECONDS - se ke oa lokolla ho fihlela mantsoe a reng 'STARTUP MENU' a hlaha skrineng.
Hang ha u qetile, u ka tsamaea lipakeng tsa likhetho tse fapaneng tsa STARTUP MENU ka ho tobetsa likonopo OPEN le CLOSE. Hang ha u se u fihletse khetho eo u ka ratang ho e fetola, tobetsa konopo ea STOP. Sebelisa likonopo OPEN le HO TSOA ho tsamaisa/fetola lipakeng tsa khetho, ebe u tobetsa STOP ho boloka khetho ea hau le ho khutlela ho STARTUP MENU.
TS'OALANG NAKO
HA HO ELETSOE HO SEBETA SEBAKA SA HO TLOA HO FIHLELA KA MOR'A MOR'A HORE UNITI E LEKOE KA HO PHETHAHETSENG.
Sebali sa ho Koala Nako se tla koala lemati ka bohona ka mor'a hore se bulehe ka palo e seng e setiloe ea metsotsoana e hlophisitsoeng ho sebelisoa khetho ena ea STARTUP MENU.Ha u se u fihletse khetho ena, sebelisa likonopo OPEN le CLOSE ho eketsa kapa ho fokotsa boleng ba nako ea ho koala ka metsotsoana e 1. Haeba e sa hlokehe, etsa bonnete ba hore Sebali sa ho Koala se behiloe HO TOMA. Haeba ho hlokahala, e behe palo efe kapa efe ea metsotsoana ho tloha ho 1 ho isa ho 99. Hopola hore ena ke palo ea metsotsoana eo lemati le tla lula le butsoe pele le koala ka bohona. Tobetsa konopo ea STOP ho boloka boleng le ho khutlela ho SETUP MENU.Sebala-nako se Koalang se tla tima haeba sesebediswa se kgutlelang morao se hloleha, mme diprothokholo tsa Push and Hold to Close di tla sebetsa mesebetsing ya ho kwala mamati.

TLHOKOMELOTAGE RETS'ELA
HLOKOMELA: SEBELISA MOLLO E FOSAHETSENGTAGHO PENYA HO KA LEBISA MONYAKO HO SEBETSA KA LEBELO LE SA BOLOKELANG.
Opereishene ena e etselitsoe ho sebetsa le SINGLE PHASE voltages ho tloha 110-240Vac (bakeng sa 3 phase voltage, sebelisa sefetoleli sa kantle sa boikhethelo). Ho na le litlhophiso tse 2 tse fumanehang, 110130V kapa 208-240V, 'me khetho e nepahetseng bakeng sa ho kenya ha hao e LOKELA ho etsoa pele ho
ts'ebetso. Ho hlōleha ho etsa joalo ho ka baka tšenyo ho opareitara le monyako. Ho fihlella khetho ena, fetola lipakeng tsa likhetho tsa menyetla u sebelisa likonopo OPEN kapa CLOSE ho fihlela VOLTAGE SETUP e hlaha skrineng. Ebe o tobetsa konopo ea STOP ho khetha. Tobetsa OPEN kapa CLOSE ho fetola pakeng tsa Moqtage Likhetho. Tobetsa STOP ho Boloka le ho khutlela ho StartUP MENU.LIEKETSENG MONYAKO
HLOKOMELA: KETSAHALO EA MEELI E LOKELA HO ETSOA KE BASEBETSI BA THUSANG FEELA. BATHO BA TLA BOLOKA MEEDI ENA HO FIHLELA HO HLAHLWA LESHA. Fumana khetho ea DOOR LIMITS ho tsoa ho STARTUP MENU ebe o tobetsa konopo ea STOP. Ha e se e khethiloe, sehlooho sa DOOR LIMITS se tla hlaha ka molaetsa oa ho 'Push OPEN to Start'. Tobetsa konopo ea BULA, 'me lemati le tla buleha ho ea sebakeng se bulehileng ka botlalo khahlano le Limit Brackets (kapa ho fihlela e kenya switch e hokahaneng le li-terminals tsa H1 le H2 - bona Junction Box Connections leqepheng la 10). TIISETSA HORE LI-ROLLER TSE HLOKOMENG TSA LENYAKO LI PHOMILE HAHOLONG LE LIMIT BRAKETS. The Open Limit joale e hloka ho hlophisoa.
PHETHA MOELITobetsa CLOSE (OPEN tshebetso ha o ka feta sebaka seo o se batlang) ho mathela lemati ho fihla bophahamong bo lakatsehang ba Moedi. Open Limit Setting e lokela ho ba bonyane ba 2 ″ ho tloha ho Limit Bracket kapa Open Limit Switch. Tobetsa konopo ea STOP ho boloka Open Limit 'me u tsoele pele ho SET TLHOKOMELISO.
PHETHA MOELIHo tloha ho Open Limit, mathela sebakeng se lakatsehang ho Koala, u sebelisa konopo ea CLOSE (OPEN e fumaneha bakeng sa tokiso e ntle). Netefatsa hore lemati le koetsoe hantle ka tlase. Tobetsa konopo ea STOP ho boloka le ho khutlela ho STARTUP MENU.
HO PHETHA LENYAKO
Ha u seta qalong, ka kopo sebelisa lebelo le mahareng la kamehla la feme ea '3' kapa butle. Joalokaha ho boletsoe ka tlase ho boholo ba Motor, Door le Drum e ka ama lebelo la ho bula lemati mme sena e ka ba sohle se hlokahalang. Fetola lebelo ho ea holimo feela ka mor'a ho etsa liteko ka lebelo le tlase.
Li-Pulse Operators li entsoe ka theknoloji e tšoanang e sebelisoang ho High Speed ​​Doors. Le hoja e lekanyelitsoe ho lebelo le phahameng la ho bula ho ~ 24" ka motsotsoana bakeng sa mamati a likarolo (sena se itšetlehile ka tekanyo ea lemati, drum, le gearbox) le lebelo le phahameng la ho koala ho ~ 16" ka motsotsoana, re khothalletsa hore u behe lebelo ho amohela. le seo o se hlokang ka bobedi, le thepa ya lemati. Ho fumana bophelo bo bolelele ka ho fetisisa monyako oa hau, le ho eketsa lebelo le lumellehang, re khothaletsa lithapo tsa Stainless Steel le lirolara tsa nylon haeba li se li sa tloaeleha monyako oa hau.
LEBELO LEBELO
Ho fihlella Litlhophiso tsa Open Speed, etsa bonnete ba hore u ho STARTUP MENU (sheba litaelo tse kaholimo), ebe u totolla lipakeng tsa likhetho u sebelisa likonopo OPEN kapa CLOSE ho fihlela Open Speed ​​e hlaha skrineng. Ebe o tobetsa konopo ea STOP ho fihlella le ho etsa liphetoho.Opereishene ea Pulse ke fektheri e nang le likhetho tse 5 tsa litlhophiso tsa lebelo le bulehileng, tse khethiloeng e le 1 (ea butle) ho isa ho 5 (ka potlako). Fetolela lipakeng tsa likhetho tsena tse 5 ka ho sebelisa likonopo OPEN le/kapa CLOSE, ebe o tobetsa konopo ea Emisa hang ha khetho eo u e batlang e hlaha ho
skrineng ho boloka le ho khutlela ho STARTUP MENU.
KWALLANG LEBELO
Ho fihlella Litlhophiso tsa Lebelo la ho Koala, etsa bonnete ba hore u ho STARTUP MENU (sheba litaelo tse kaholimo), ebe u totolla lipakeng tsa likhetho u sebelisa likonopo tsa OPEN kapa CLOSE ho fihlela Ho Koala Lebelo le hlaha skrineng. Ebe o tobetsa konopo ea STOP ho khetha.Opereishene ea Pulse ke fektheri e nang le likhetho tse 5 tsa litlhophiso tsa lebelo le haufi, ho tloha ho 1 (ea butle) ho isa ho 5 (ka potlako). Fetolela lipakeng tsa likhetho tsena tse 5 ka ho sebelisa likonopo OPEN le/kapa CLOSE, 'me u tobetse konopo ea Emisa hang ha khetho eo u e batlang e hlaha skrineng ho boloka le ho khutlela ho StartUP menu.
JOG MOKHOA
Ho fihlella Setting ea Jog Mode, etsa bonnete ba hore u ho STARTUP MENU (sheba litaelo tse kaholimo), ebe u totolla lipakeng tsa likhetho u sebelisa likonopo OPEN kapa CLOSE ho fihlela Jog Mode e hlaha skrineng. Ebe o tobetsa konopo ea STOP ho qala ho sebelisa.Jog Mode e thusa ho laola lemati ka letsoho ho sebelisa likonopo OPEN le CLOSE. Nakong ea Jog Mode, meeli eohle ha e sebetse, 'me li-protocol tsa push-hold lia qalisoa. Khetho ena e ka sebelisoa ho lekola tšebetso ea mamati ntle le encoder, ho netefatsa ho leka-lekana ho nepahetseng ha lemati, kapa e le mokhoa oa ho sebelisa lemati ka matla haeba sekhouto se sa sebetse hantle. Monyako o tla tsamaea ka tsela e 'ngoe le e' ngoe sebakeng se setehileng BULA LEBELO LE BONYA LE HO TLOA LEBELO LE BENANG (sheba Leqephe la 22), bakeng sa ts'ebetso e sireletsehileng.HO TLOHA MENU YA HO QALA – CALIBRATION LE TEKOLO
Ho tsoa ho Startup Menu, tobetsa le ho lokolla konopo ea STOP ha StartUP MENU e hlaha ho LCD. Haeba o bolokile diphetoho lebelong la opareitara, kapa o na le meedi ya ho seta botjha, o tla hlokeha hore o etse tekolo ya kapele ya sistimi. Litlhahiso tsa skrine li tla fana ka litaelo tsa nako ea sebele mabapi le litlhoko tsa ho lekanya. Sheba Leqephe la 22 ho fumana lintlha tse felletseng mabapi le Calibration. Hang ha Calibration e phethiloe kapa haeba e ne e sa hlokehe, tsamaiso e tla tsamaisa tlhahlobo e potlakileng, 'me LCD e lokela ho bontša boemo ba hona joale ba monyako (O butsoe, o koetsoe kapa o emisitsoe). Hona joale ho hlokahala tlhahlobo ea monyako.
PELE O SEBETSA LENYAKO, TIISETSA HORE HO SEBELISA MAREKATE A MATEKO (KGOTSA PUSHER SPRINGS KAPA LIMIT SWITCH) A BE A LE MAEMO, LE MEEDI YA MONYAKO E BEHILE.
Bula 'me u koale lemati ka makhetlo a' maloa 'me u shebe hore na lemati le ntse le sebetsa hantle le hore le ema ka meeli e loketseng. Netefatsa hore lemati le behiloe ka lebelo le hlokahalang, 'me u leke sesebediswa se seng le se seng sa ho kgutlela morao le ho kenya tshebetsong ho netefatsa tshebetso ya sona.

MOKHATLO MENU

HLOKOMELA: LIKARA TSENA LI LOKELA HO FUMANA FEELA KE MOTHEKENE E KHOEBIsitsoeng KA MOR'A HO HLOMELA LE HO HLAHALA TEKO, FEELA HA HO HLOKAHALA. Bakeng sa ho fihlella likhetho tsa ADVANCED MENU, tobetsa 'me u tšoare KONOANE EA HO ETSA KA METSOTSO E 10 ha u ntse u le skrineng sa StartUP MENU. Se ke oa lokolla ho fihlela ADVANCED MENU e hlaha skrineng.
RETS'ELISITSOE NAKOSebelisa sena ho beha nako e lakatsehang ea ho lieha bakeng sa ho Reversing Door. Haeba sesebediswa se kgutlelang morao kapa tshebediso e kentswe tshebetsong ha lemati le kwala (ke hore, foto-leihlo, ho lemoha ha thepa, jj.) lemati le tla kgefutsa ka nako e behilweng.
Khetha lipakeng tsa metsotsoana e 0.5, 1.0, 1.5, kapa o KOTSE. Haeba o tiisitsoe, lemati le ke ke la fetoha, empa le lule le le teng ho fihlela mosebelisi a kenella (Sena se khothaletsoa ha o sebelisa Sebali sa ho Koala). Tobetsa STOP ho Boloka Setting ena le ho khutlela ho ADVANCED MENU.
PWM MOEKETSITlhophiso ena e lumella mosebelisi ho fetola maqhubu a ts'ebetso ea enjene lipakeng tsa 2.4 kHz, 12kHz le 20kHz. Maqhubu a itseng a ka kena-kenana le lisebelisoa tsa motho oa boraro kapa a baka lerata le phahameng mme ho ka hlokahala hore ho lokisoe. Feme ea kamehla e hlophisitsoe ho 12kHz. Se ke oa fetola tlhophiso ena ntle le haeba u eletsoa ke Tšehetso ea Theknoloji.
TLHOKOMELO BRAKEBakeng sa mamati a ka bang boima ho feta maemo a tloaelehileng kapa a nang le liliba tse leka-lekaneng ka tsela e fosahetseng tse etsang hore ho koalehe ho hoholo, mochine ona o na le Likhetho tsa Dynamic Braking. Haeba lemati le sa fokotsehe ka mokhoa o hlakileng nakong eo le reriloeng ka "soft stop" (hoo e ka bang mohatong oa ho qetela oa leeto), ho ka etsahala hore lemati le tla hloka puseletso e matla ea braking.
Femethari ea kamehla ha e na Dynamic Braking (OFF), 'me e khothaletsoa bakeng sa ts'ebetso e tloaelehileng. Ha Dynamic Braking e ka ipaka e hlokahala, tobetsa likonopo OPEN/CLOSE ho fetola lipakeng tsa likhetho (tse tlase, tse mahareng le tse phahameng).Hlokomela hore tlatsetso ea Dynamic Braking e reretsoe ho thusa mamati a nang le inertia e phahameng ho fihlella 'setopo se bonolo'. Ho khothaletsoa hore pele u seta Dynamic Braking, u qale ka ho lekola lemati ka lebelo le tlase le koalang. Ha o hloleha ho etsa sena, ha o seta Dynamic Braking o lokela ho qala ka ho beha LOW pele, ebe o leka lemati. Haeba ho hlokahala braking e 'ngoe, fetela ho MEDIUM setting 'me u leke, ebe u ea sebakeng se phahameng. Haeba u hlokomela hore lemati le etsa motsamao oa 'ho sisinyeha' haufi le botlaaseng ba leeto la lona, ​​sebaka se phahameng haholo, 'me se lokela ho theoleloa.
PELETSO MATLA
Haeba lemati le sitisoa ho buleha (ke hore, ka lebaka la leqhoa, latch ea lemati e kenngoa, joalo-joalo) tšobotsi ena ea hona joale ea ho beha leihlo e tla emisa lemati ho thibela tšenyo. Boikutlo ba tlhahlobo ena bo ka fetoloa maemong ana, kapa karolo e ka tingoa ka botlalo.Kutloisiso ea Matla a Opening e ka fetoloa ho tloha ho 1-20 (1 e ameha haholo ho litšitiso / jams / ho se leka-lekane) kapa OFF. Boemo ba feme ke '5'.
TS'OELA MATLA
Haeba lemati le sitisoa ho koaloa (ke hore ka lebaka la tšitiso, jeme, joalo-joalo) tšobotsi ena ea hona joale ea ho beha leihlo e tla emisa le ho khutlisa lemati ho thibela tšenyo. Boikutlo ba tlhahlobo ena bo ka fetoloa maemong ana, kapa karolo e ka tingoa ka botlalo.Kutloisiso ea Matla a ho Koala e ka fetoloa ho tloha ho 1-20 (1 e ameha haholo ho litšitiso / jams / ho se leka-lekane) kapa OFF. Boemo ba feme ke '3'.
BULELENG LEBNYANEHa lemati le atamela moeli o bulehileng 'me le theoha ho ea ho lebelo le liehang pele setopong (Soft Stop), matla a eketsehileng / lebelo le ka hlokoa ho qeta ho bula. Leha sena e le sesupo sa lemati le leka-lekaneng ka mokhoa o sa lokelang, tšobotsi ena e ka sebelisoa ho lefa. Setting ena e tlameha ho fetoloa feela ho tloha ho NORMAL ho ea ho HIGH haeba lemati le sa tsitsa ka mor'a nako 'me le sa tsamaee ka ho feletseng ho ea ho Open limit. Haeba e le ts'ebetso e ncha, ho fetola tsitsipano ea selemo bakeng sa tekanyo e nepahetseng ke mohato oa pele o hlokahalang. Boemo ba feme ke 'NORMAL'.
TS'OALANG LEBNYANEHa lemati le ntse le atamela Koala Limit 'me le theolela ho ea ho lebelo le liehang pele setopong (Soft Stop), matla a eketsehileng / lebelo le ka hlokoa ho qeta ho koala. Leha sena e le sesupo sa lemati le leka-lekaneng ka mokhoa o sa lokelang, tšobotsi ena e ka sebelisoa ho lefa. Tlhophiso ena e tlameha ho fetoloa feela ho tloha ho NORMAL ho ea ho HIGH haeba lemati le fetoha le sa tsitsang ha nako e ntse e ea 'me le sa tsamaee ka ho feletseng ho koala moeli. Haeba e le ts'ebetso e ncha, ho fetola tsitsipano ea selemo bakeng sa tekanyo e nepahetseng ke mohato oa pele o hlokahalang. Boemo ba feme ke 'NORMAL'.
BULA RAMPTLAS'A KHOLOSetlhophiso sena se sebelisetsoa ho fetola ntlha eo lemati le qalang ho theoha ho ea ho lebelo le liehang ha le ntse le atamela moeli o butsoeng. Mosebelisi a ka khetha pakeng tsa auto (e hlophisitsoeng ke sistimi) kapa palo e lakatsehang ea ho potoloha ha shaft (pakeng tsa 0.5 ho reteleha le 3 ho potoloha ha halofo).
Boemo ba Femethari bakeng sa karolo ena ke AUTO. Sena ha sea lokela ho fetoloa ntle le haeba se khothalelitsoe ke Pulse Technical Support.
HAUFI RAMPTLAS'A KHOLOSetlhophiso sena se sebelisetsoa ho fetola ntlha eo lemati le qalang ho theoha ho ea ho lebelo le liehang ha le ntse le atamela Moeli oa ho Koala. Mosebelisi a ka khetha pakeng tsa auto (e hlophisitsoeng ke sistimi) kapa palo e lakatsehang ea ho potoloha ha shaft (pakeng tsa 0.5 ho reteleha le 3 ho potoloha ha halofo).
Boemo ba Femethari bakeng sa karolo ena ke AUTO. Sena ha sea lokela ho fetoloa ntle le haeba se khothalelitsoe ke Pulse Technical Support.
BULA LIKHETHO TSA LIMITPeakanyo ena e dumella mosebedisi ho ikgethela pakeng tsa SET LIMIT kapa moeli oa HO BULELA KA HO PHELANG bakeng sa konopo ea "OPEN" e phaneleng ea taolo kapa "O" terminal (Push Button Station Inputs) botong ea taolo ea potoloho.
BULA LIKHETHO TSA LIMIT (REMOTE RADIO)Tlhophiso ena e lumella mosebedisi ho khetha pakeng tsa moeli o behiloeng kapa moeli o bulehileng ka ho feletseng bakeng sa likhokahano tsa "REMOTE RADIO" ho boto ea potoloho ea taolo.
SEHLAHANG RELAY MAKHETHA
Output Relay e sebelisoa bakeng sa ho etsa lipontšo/ho hokahana le lisebelisoa tse ling tse kang seea-le-moea sa boema-kepe, lisebelisoa tsa ts'ireletso, mamati a mang, joalo-joalo Ho na le khokahano e le 'ngoe ea NO le NC e le 'ngoe e fumanehang e ka matlafatsoang moeling o bulehileng kapa o koetsoeng, joalo ka ha o khethiloe ke mosebelisi sebakeng sena.
TS'IRELETSOKarolo ena e ea hlokahala ho lekanya ho utloa ha mojaro. Skrine e thusa mosebelisi ho laola maemo.

ELA HLOKO: HAEBA U FETOTSA LIKE TSA LINTHO TSE LATELANG, THE OPERATOR E TLA O TSAMAISA HO HLOMELA TSELA HA U TLOA HO MENU: Moqtage Range, boemo ba Motor, Meeli ea Menyako, Lebelo le Bulehileng, Lebelo le Koala, Maqhubu a PWM, Open Ramptlase le ho Koala Rampfatshe.
HO LEBISA LENYAKO HO KENYA MEHATO E LATELANG: – Potoloho e ikatisang butle ea ho bula lemati. (U tla susumelletseha ho bula monyako)
– Bukana e koalang potoloho ea lemati. Tobetsa le ho Tšoara konopo ea CLOSE nakong ea potoloho ena. Haeba konopo ea CLOSE e sa ts'oaroe ho fihlela monyako o koetsoe ka botlalo, Opereishene e tla hlakola mohato ona 'me e u bolelle hore u qale hape.
- U tla khothaletsoa ho bula lemati la Calibrate Opening Force.
– Ho seta encoder bocha. Hang ha lemati le butsoe ka botlalo, o tla tlameha ho tobetsa OPEN hape ho seta Encoder bocha (Sekrine sa LCD se tla re "DOOR IS READY" joalo ka pele pele Encoder e ka hlophisoa bocha.)TS'OANELO TŠEBELEKarolo ena e beha khopotso, e bonts'itsoeng ho LCD, ho hlophisa tlhokomelo ka mor'a palo e khethiloeng ea lipotoloho tsa opareitara. Feme e hlophisitsoe ho tsebisa ka Tlhokomelo ka mor'a lipotoloho tse 250,000 (e khothalelitsoeng bakeng sa Phetoho ea Brush ea Motor). E ka theoleloa ka 1,000 cycle increments. Tobetsa likonopo OPEN kapa CLOSE ho fetola, 'me Tobetsa le ho Tšoara likonopo hore u tsamaise ka potlako litlhophisong tsa potoloho eo u e hlokang.
TS'ELISO LEFUBEDUEtsa hore tšobotsi ena e BULE haeba u rata hore lebone le lefubelu la lebone la LED Stop & Go Light le bonese ha lemati le ntse le sisinyeha.
TS'ELISO MFUBEDUE sebelisoa hammoho le CLOSING TIMER (Leqephe la 18), karolo ena ea tšireletso e khantša lebone le lefubelu (kapa lebone le lefubelu le benyang haeba sena se entsoe ka matla) la lebone le khomaretsoeng la LED Stop & GO pele lemati le koaloa ka nomoro e hlophisitsoeng. ea metsotsoana. Hlokomela hore ha u ka khetha boleng bo boholo ho feta CLOSING TIMER e setiloe esale pele, e tla qala ka nako e le 'ngoe. Factory Default ke tlhophiso ea 'OFF', e nang le likhetho tsa metsotsoana e 1-9 ea ADVANCED RED.
REMOTE RADIO MOKHOA
Setting ena e fana ka likhetho tse peli tsa hore na remoutu e sebetsa joang haeba e petelitsoe ha lemati le ntse le buleha.Mokgweng wa 'Bula/Koala' ha o tobetsa konopo ya remoutu ho tswa sebakeng se kwetsweng, lemati le tla buleha ho setlama se kgethilweng sa moedi (sheba Dikgetho tsa Bula Moedi leqepheng la 14). Ho tobetsa remote hape nakong ea leeto la eona ho ke ke ha e-ba le phello. Hang ha e fihla sebakeng sa Open, ho tobetsa remote ho tla laela lemati hore le koale.
Ka mokhoa oa 'Bula/Emisa/Koala' o tobetsa konopo ea remoutu ha lemati le koetsoe, lemati le tla buleha bakeng sa litlhophiso tse khethiloeng tsa moeli. Ha o ka tobetsa remote hape nakong ya Open cycle, lemati le tla ema. Haeba e hatelloa hape, e tla koala ho tloha sebakeng se emeng.Boemong bofe kapa bofe, haeba remoutu e totobatsoa ha lemati le koalehile, e tla khutlela morao.
BELELE MELITI
Haeba u khetha ho sebelisa Phetoho (moeli, sebaka se haufi, lehlaka, joalo-joalo) ho bontša hore monyako o bulehile ka botlalo bakeng sa ho seta encoder bocha (e hokela ho H1 & H2 ka lebokoseng la mateano), beha khetho ena ho YES. HO SEBELISA SWITCH HO SA HLOKA HO KENYA HO KENYA LIBAKATE JOALOKA TLHOKOMELO EA TŠIRELETSO HA HO FETOHA HO FETOHA.
HAUFI RAMP-NAKO EA PHAHAMAHo potoloha ha Koala, ho tloha sebakeng se bulehileng, u ka fetola nako eo ho nkang monyako ho potlakisa ho tloha sebakeng sa eona sa ho phomola ho ea ho lebelo le feletseng. Sena se molemo haholo ha o sebelisa mamati a tloaelehileng a phahamisang le/kapa meropa e meholo, kapa ha yuniti e kentsoe lemating la tšepe le bilikang. Sena se ka fetoloa ka 0.5s increments ho tloha 0.5 ho 3.0 Seconds. Feme ea kamehla ke 1.0s
TS'ISO LEMOHANG NAKOE le karolo ea tšireletso e eketsehileng, encoder e hlokomela ho potoloha ha shaft. Haeba e sa bone ho sisinyeha moo ho lokelang ho ba teng, sistimi e tla emisa taelo ea potoloho, 'me e bonts'a phoso ea 'NO MOTION DETECTED'. Tieho e lumelletsoeng pele phoso ena e lemohuoa ke sistimi e ka lokisoa ho tloha ho 0.2s ho isa ho 0.6s, empa ha ea lokela ho fetoloa ho tsoa ho Fektheri ea kamehla ea 0.3 ntle le haeba e laetsoe ho etsa joalo ke basebetsi ba tšehetso ea tekheniki.
LEKELETSO TS'OANEHang ha e khethiloe ho tsoa ho menu, lemati le tla sebetsa ka mokhoa o ikemetseng ka potoloho e le 'ngoe e feletseng ea ho koala / e bulehileng (ka mor'a ho seta bocha). E tla tlaleha ka litekanyetso tsa skrine tse emelang matla a hlokahalang ho bula le ho koala lemati. Phapang ea lipalo tsena e emela ho se leka-lekane, 'me liphetoho ho tsitsipano ea selemo li lokela ho etsoa ka nepo. Matha karolo ena hape ho netefatsa litokiso tse nepahetseng.
NTHABISENG FEREKITlhophiso ena e lumella ho hlophisoa bocha ha likhetho tsohle tsa menyetla ea feme e khothaletsoang bakeng sa mamati a likarolo. Tsena ke Litlhophiso tsa Feme:

QALANG MENU
Sebali sa ho Koala: …………………………………………………….. TIMA
Moqtage Range: …………………………………………………………. 208V-240V
Tlhophiso ea Meeli ea Menyako: ……………………………………………….. Liphetoho tse 4 – E Lokela ho Rulafatsoa Hape ke Sehokelo
Open Speed: ……………………………………………………….. 3
Koala Lebelo: …………………………………………………………. 3
RETS'ELISITSOE SETEP MENU
Reversing Timer: …………………………………………… 1.0 Metsotsoana
Maqhubu a PWM: ………………………………………… 12 kHz
Dynamic Brake: ……………………………………………… HIMA
Opening Force: ………………………………………………. 10
Matla a ho Koala: ……………………………………………………… 2
Bula Lebelo le Butle: ……………………………………………… E tloaelehileng
Koala Butle butle: …………………………………………. Tloaelehileng
Koala Ramptlase: ………………………………………… Auto
Bula Ramptlase: …………………………………. Auto
Bula Likhetho tsa Moeli - Konopo ea Push:…………………………. Beha Moeli
Bula Likhetho tsa Limit - Radio Remote:…………………….. Beha Moedi
Phetiso ea Liphetho:………………………………………. E Matlafalitsoeng Ha E Buloa
Ho benya ho khubelu: ………………………………………………………. TLOA
Red Red: ……………………………. TLOA
Bofubelu bo tsoetseng pele: …………………………………….. Bula/Koala
Lenane la Tlhokomelo: …………………………….. 250,000 Cycles
Open Limit Switch: ……………………………………………. Che
Koala Ramp-Nako ea ho Phahamisa …………………………………… 1.0 Metsotsoana
Motion Detect Time……………………………………….. 0.3 Metsotsoana
Ka mor'a ho etsa reset ea fektheri (haeba ho bonahala ho hlokahala), fetola li-setting kamoo ho hlokahalang, 'me u fetole litlhophiso tsa moeli oa lenaneo ebe u etsa calibration ka mor'a moo.
HO TLOHA MENU E FETILENG FETA LETHATHAMO LA TSE KA HARE - CALIBRATION & TESTATIONHo tsoa ho ADVANCED MENU, tobetsa le ho lokolla konopo ea STOP ha ADVANCED MENU e hlaha ho LCD. Sena se tla u khutlisetsa ho STARTUP MENU. Tobetsa 'me u lokolle konopo ea STOP hape ho tsoa ho menyetla eohle le ho leka litlhophiso tse fetotsoeng. Haeba, ha u ntse u le ho ADVANCED MENU 'me u bolokile liphetoho ho PWM Frequency, Open Ramptlase kapa Koala Ramptlase o tla hlokeha ho etsa tlhophiso e potlakileng ea sistimi. Litlhahiso tsa skrine li tla fana ka litaelo tsa nako ea sebele mabapi le litlhoko tsa ho lekanya. Sheba Leqephe la 21 bakeng sa lintlha tse ling mabapi le Calibration.
Hang ha Calibration e phethiloe kapa haeba e ne e sa hlokehe, tsamaiso e tla tsamaisa tlhahlobo e potlakileng, 'me LCD e lokela ho bontša boemo ba hona joale ba monyako (O butsoe, o koetsoe kapa o emisitsoe). Ke hona joale moo tlhahlobo ea litlhophiso life kapa life tse fetotsoeng e ka qalang.

BUKA EA BETTER E TSOANG PATENG – MATLA OUTAGE TS'EBETSO

Pulse ke fektheri e nang le sistimi e bolokang betri e nang le patented mme e kengoa tšebetsong ka bo eona nakong ea motlakase.tage. Backup ena ea betri e sebetsa le haeba ho na le tšenyo ea boto ka lebaka la matla a kantle joalo ka lehalima kapa tšusumetso.
Nakong ea matla otage, feela ho sutumetsa le ho tšoara konopo ea OPEN e le hore u bule lemati, 'me u sutumetse le ho tšoara konopo ea CLOSE e le hore u koale monyako - monyako o tla arabela hantle, empa hlokomela hore lebelo le tla fokotseha.
Meeli ha e sebetse, 'me ke habohlokoa ho lokolla konopo hang ha lemati le fihla sebakeng se loketseng.
Lisebelisoa tsohle tsa ts'ireletso le tsona li tla holofala nakong ea ts'ebetso ea "backup" mme mosebeletsi ofe kapa ofe ea sebetsang lemati o lokela ho boloka pono e hlakileng le monyako e le ho fokotsa kotsi ea ts'usumetso e ka bang teng ea menyako le basebetsi kapa lisebelisoa, le ho netefatsa hore lemati le sebetsa ka polokeho. .
TLHOKOMELISO: HA U SEBELISA BAKAPELO EA BETRI, MEELI HA E KETSOE. O TSHWANETSE HO HLAHALA KOPONANE HO NAKO E NEPAHETSENG, KAPA KOTSI YA HO TLOSA MOTHO OA SEBAKA. U SE KE UA TŠOARA HO BOLOTSILE KAPA HO TSWALA KONYANE HO FETA HO HLOKAHALA.
Ho bulela/lekola tshebetso ya bekapo ya betri ha motlakase o le teng, ntsha motlakase ho opareitara. Haeba libeteri li khaotsoe ka botlalo kapa li le sieo, motheo oa enjene o boetse o na le "ratchet" ea 3/8 ". TIMA MATLA HO OPERATOR (leha motlakase o bonahala o le sieo), boloka crankshaft, socket wrench kapa power drill ka 3/8" hlooho ea ratchet (e sa kenyelelitsoe) ka har'a sekeno sa ratchet ebe u e potoloha ka tsela e nepahetseng e le hore u bulehe. kapa ho koala lemati. Bulela motlakase hang ha ts'ebetso ea matsoho e se e sa hlokehe.

ELA HLOKO LIBETIRI

Libetri tse fanoeng ke lead-acid ke 2 x 12V tse hoketsoeng ka letoto ho fana ka 24Vdc. Selaoli se fana ka tjhaja e shebiloeng e behiloe leihlo molemong oa ho boloka bophelo ba libeteri. Haeba libetri li ka khangoa ka ho feletseng 'me li se li sa amohele tefiso, ka kopo, kenya li-betri tse lekanang le tsona sebakeng sa tsona, 'me u lahle li-unit tse felletsoeng ke nako ho latela melao ea tikoloho ea lehae. LE KA mohla u se ke ua tlosa jumper e fanoeng pakeng tsa libeteri ntle le ha u ntse u fetola, 'me u be le bonnete ba hore u hokela hape ha ho hlokahala hore ho nkeloe sebaka sa betri.

LIKOPO TSE HLOKONANG LESEO

iControls e khothaletsa ntlafatso e fumanehang bakeng sa lits'ebetso tsohle tse hanyetsanang le boemo ba leholimo. Li-Standard Pulse Operator Motors li filoe litekanyetso tsa IP44, 'me li ka ba kotsing ea ho kena metsing. Ho feta moo, li-sensor tsa foto-eye li na le tšekamelo ea ho angoa hampe ke condensation holim'a ponts'o, ho thibela ts'ebetso e tšepahalang maemong a joalo.
iControls e fana ka ntlafatso e sa sebetseng hantle ea boemo ba leholimo e tiisang lintlha tse kenang lebokoseng la mateano a makoloi, 'me e kenyelletsa sensor ea NEMA 4X thru-beam sebakeng sa leihlo la foto. Ka kopo ikopanye le iControls bakeng sa lintlha le litheko.

LIEKETSENG TSA MOSEBETSI

MATHATA MOTSAMAI

PONTS'O LEKHOTLA	MOHLOMONG SEBAKA	LIKELETSO MOHATO
HA HO BONTŠA PANEL EA LCD	NO MATLA.	Lekola matla a ho sekhechana sa potoloho, hakolla switch, 'me u hlahlobe likhokahano tsa lithapo.
		Sheba fuse (sheba lintlha tsa fuse litaelong tsa ho instola) ka lebokoseng la mateano.
	TLHOKOMELO(LI-).	Sheba likhokahano ho J/box (haufi le opareitara) le phanele ea taolo; hlahloba hore thapo ea ribone ho ponts'o ea LCD e hokahane ka thata lipheletsong ka bobeli.
	TLHOKOMELOTAGE LAHELA KA terata PAKENG TSA LEbokoso la OPERATOR JUNCTION HO PANEL EA TAOLI.	Lekola voltage lipakeng tsa terminal +24 le COM, haeba ho se na matla kapa Pulse voltage ka tlase ho 23V, hlahloba wiring lipakeng tsa Junction box (haufi le opareitara) le phanele ea taolo.
	LCD PANEL SEBOKA.	Haeba 24Vdc e fumanwa mme thapo ya ribone e hoketswe, ho ka hlokahala hore ho nkelwe sebaka sa LCD panel panel.
	PHAnele EA TAolo LEBOTO.	Hakolla +24V terata (ho tloha ho J/box) phanele ea taolo, hlahloba voltage pakeng tsa terata e khaotsoeng le terminal ea COM, haeba voltage ke 24Vdc joale ho ka hlokahala hore ho nkeloe sebaka sa boto ea potoloho ea phanele.
MONYAKO O EME KA THOETSO (HA E TSEMO MELI) MAEMO.	TŠEBELETSO E KHOA	Ikopanye le Nomoro ea Mahala bakeng sa thuso: 1-833-785-7332
MONYAKO O EMA KA NAKO E KHUTSANE HO MAEMO A HAUFI	LENYAKO LE KA TLOHA HO TSAMAEA.	Matha Balance Check ho tsoa ho Advanced Menu.
MONYAKO O RE FETOHA PELE O FIHLELA BOEMO BA HAUFI KAPA HANG HANG HA KONANE E HAUFI E TLOHA.	PHOTO-EYE/REFLECTOR/ THRU-BEAM SENSOR E FOSAHETSENG/E THIBANG/ E FOSAHETSENG.	Hloekisa, kopanya hape le/kapa tšitiso e hlakileng ka pel'a li-sensor/reflector. Lekola lithapo bocha joalo ka ha ho bonts'itsoe setšoantšong sa 1 leqepheng la 13. Etsa bonnete ba hore thapo kapa ho hlobolisa boemo ba leholimo ha ho bake tšitiso.
	TLHOKOMELO E TLHOKOMELO E HLOKOMELA HAHOLO	Fetola Matla a ho Koala hore a be boemong bo fokolang haholo ho Menu e Tsoetseng Pele. 1 e na le kutloelo-bohloko haholo, 'me 20 ha e na kutloelo-bohloko haholo.
	MOKHATHO WA BORARO KHUTLISANG LISEBETSI TSA SEBELISA.	Hakolla lisebelisoa tsa motho oa boraro tse khutlisetsang morao, kenya jumper lipakeng tsa ho khutlisa terminal 3 le +24 'me u leke hape. Hokela hape lisebelisoa tse khutlisetsang morao ka bonngoe ho arola sesebelisoa se senyehileng, (sheba leqepheng la 11-17 Bukeng ea ho instola).
'MONYAKO O EMETSOE' MOLAETSA HO LCD PANEL	TŠIRELETSO KAPA LENYAKO LE TSHOETSOE KA HO THIBELLA.	Tlosa tšitiso kapa u lokolle lemati, khaola (tima) motlakase oa AC 'me u leke lemati ka tlas'a matla a betri.
	PUSHER SPRINGS E KA THIBA MONYAKO HO FIHLELA MEETLO E BOLOTSENG.	Tlosa Pusher Springs 'me u kenye li-brackets tse ka holimo tse fanoeng ka opareitara kapa seta bocha OPEN moeli hore Pusher Spring e se ke ea kopanela.
	MOSEBETSI OA MOEKETSI	Ikopanye le Nomoro ea Mahala bakeng sa thuso: 1-833-785-7332
MONYAKO O TSAMAISA LI-INCH TSE Mmaloa KAMOR'A HO BOLOKA/TLOA HO TLOA LE HO EMA	JUMPER PAKENG TSA 'S' LE '+24' TERMINAL E TLOSITSOE.	Haeba ho se na seteishene sa li-push-button se kentsoeng mohala sebakeng sa sona, kenya jumper hape.
	KONONOLO EA REMOTE HA E NA LE NC (KA TSELA E TLOHELEHANG) IKHOALANG BAKENG SA KONYANE EA HO ETSA.	Tlosa seteishene sa konopo ea konopo (kapa lebitso la konopo ea STOP) bakeng sa motho ea nang le lebitso la NC konopo ea STOP.
	REMOTE PUSH BUTTON STATION E KHOPOTSOE HO KHOPOTSOA.	Hlahloba le ho lokisa wiring ha ho hlokahala.
MONYAKO HA O KELELE HO REMOTE KAPA HO TLOA TIMER	PUSHER SPRINGS E KA THIBELLA MONYAKO HO BULELA KA HO PHETHAHETSENG HO FIHLELA MOEDI O O BUTLEHILENG (SEKRENENE E BALA 'MONYAKO O EMETSOE') .	Tlosa liliba tsa pusher 'me u nkele sebaka ka Limit Brackets tse fanoeng; kapa fetola Seta Open Limit e le hore e se ke ea kenya li-pusher springs le ho seta lisebelisoa tsohle tsa ho kenya tshebetsong ho bula lemati ho Set Limit.
	TLOAELELLO EA TIMER HA E SE KE UA BEHA KA NTLE.	Seta Botjha Koala Nako, (sheba Tq 18 bukeng ya ho instola).
	HA HO MOSEBETSI OA SESEBETSI OA KHUTLISANG HO R1 KAPA R2 TERMINAL	Netefatsa hore sesebelisoa se le seng se loketseng le se sebetsang se kentsoe bonyane ho e 'ngoe ea litheminale tsena. Haeba e kentsoe, hlahloba marang-rang le ho tsamaisana le ho sebetsa ha liteko
LENYAKO HA LE SEBELE KA MATLA A BETRI	TS'ELISO MOTS'ELI	Kenya tšebetsong sekhechana sa potoloho hape ka ho tobetsa konopo ea reset.
	LIBETRI LI KA TŠOA, KAPA LI SHOLE KAPA LEHLOKOA LA TAOLI.	Sheba libeteri voltage, haeba e le tlase li lumelle hore li lefise lihora tse 24 ka matla a AC ON. Tlosa libeteri haeba li ntse li sa lefisoa. Fetola boto ea taolo haeba libeteri li tjhajiloe ka botlalo 'me lemati le leka-lekana.
	MONYAKO TSOA TS'OANELO.	Matha Balance Check ho tsoa ho Advanced Menu.
	MATLA A KA NNA A TSAMAILE.	Netefatsa hore matla a mantlha a yuniti ha a tima.
TLHOKOMELA HO HLOLA- HO HLAHALA KA HO TSAMAEA	MATLA A KOALANG HA A HLOKOA KA NTLE	Fetola Matla a ho Koala le/kapa a ho Bula. Litsela li hlahisoa leqepheng la 21-22. Eketsa kapa fokotsa ho ipapisitsoe le boima ba monyako / lehlakore le ts'ebeliso ea lemati

PUSO MOPEREKI PUSELETSO LIKAROLO

PUSELETSO KAROLO TLHALOSO	Pulse 500-100	Pulse 500-125	Pulse 750-100	Pulse 750-125	Pulse 1000
Motor	PDC-500-1800	PDC-500-1800	PDC-750-1800	PDC-750-1800	PDC-P1000-1800
Motor Brush Set (2)	PDC-BORASHA	PDC-BORASHA	PDC-BORASHA	PDC-BORASHA	PDC-BORASHA
Gearbox	PDC-GB50/1/30	PDC-GB75/1.25/40	PDC-GB50/1/30	PDC-GB75/1.25/40	PDC-GB75/1.25/40
Boto ea Taolo e Tlaase	PCBA-PC7	PCBA-PC7	PCBA-PC7	PCBA-PC7	PCBA-PC7
Upper Drive Board	PCBA-PD7	PCBA-PD7	PCBA-PD7	PCBA-PD7	PCBA-PD7
Letsoho la Torque	PDC-TQA-50	PDC-TQA-75	PDC-TQA-50	PDC-TQA-75	PDC-TQA-75
Torque Arm Bracket	PDC-TQB-50	PDC-TQB-75	PDC-TQB-50	PDC-TQB-75	PDC-TQB-75
Li-brackets tsa moeli w/ Hardware	PDC-LMTBKT	PDC-LMTBKT	PDC-LMTBKT	PDC-LMTBKT	PDC-LMTBKT
Shaff Collar	PDC-COL-1.0	PDC-COL-1.25	PDC-COL-1.0	PDC-COL-1.25	PDC-COL-1.25
Shaff Key	PDC-KEY-3	PDC-KEY-3	PDC-KEY-3	PDC-KEY-3	PDC-KEY-3
Encoder	PDC-ENCD50	PDC-ENCD75	PDC-ENCD50	PDC-ENCD75	PDC-ENCD75
Betri (sekotoana se le seng)	PCB-BAT-5A	PCB-BAT-5A	PCB-BAT-7A	PCB-BAT-7A	PCB-BAT-9A
Battery Set	PCB-BAT-5A2	PCB-BAT-5A2	PCB-BAT-7A2	PCB-BAT-7A2	PCB-BAT-9A2
Set ea Leihlo la ho Bonahatsa	RPE-100SET	RPE-100SET	RPE-100SET	RPE-100SET	RPE-1000SET
Sensor ea Lifoto feela	RPE-100	RPE-100	RPE-100	RPE-100	RPE-100
Bracket ea Photo-Eye	RPESTB-BRKT	RPESTB-BRKT	RPESTB-BRKT	RPESTB-BRKT	RPESTB-BRKT
Photo-Eye Reflector	RPE-RFLC	RPE-RFLC	RPE-RFLC	RPE-RFLC	RPE-RFLC1000
Sebaka sa Taolo ea Phanele	PCBA/ENC-	PCBA/ENC-	PCBA/ENC-	PCBA/ENC-	PCBA/ENC-
(E feletse)	PC7/500	PC7/500	PC7/750	PC7/750	PC7/1000
Control Panel (ha ho boto)	PCB-ENC-500	PCB-ENC-500	PCB-ENC-750	PCB-ENC-750	PCB-ENC-750
Thapo ea Ribone	PCB-RIBCAB-1	PCB-RIBCAB-2	PCB-RIBCAB-1	PCB-RIBCAB-2	PCB-RIBCAB-2
Tobetsa Konopo	PCB-PB1	PCB-PB1	PCB-PB1	PCB-PB1	PCB-PB1

Remote Radio Transmitter/Receiver Wiring Diagram/LitaeloWiring Receiver ho Pulse Operator:
Lenaneo le le Leng:
Haeba u sebelisa konopo e le 'ngoe feela ho transmitter ho sebelisa lemati, kenya mohala ho ea ka setšoantšong se ka ho le letšehali ho ea ho REMOTE CONTROL terminals ho Pulse Operator Control Board. Hang ha e kentsoe 'me e pentiloe hantle le transmitter (sheba lehlakoreng le leng bakeng sa litaelo tsa ho nyalana), konopo e hlophisitsoeng e tla bula kapa e koala lemati, ho itšetlehile ka boemo ba monyako. Haeba sebali sa nako se khutlisetsang morao se sebetsa ho Pulse Operator ea hau, konopo e hlophisitsoeng e tla bula lemati feela. Hlokomela hore likonopo tsohle tse 3 ho transmitter li ka hlophisoa hore li sebetse monyako o le mong, kapa ka bonngoe li hlophiselitsoe ho baamoheli ba fapaneng ho sebelisa mamati a 3 a arohaneng.
Dual Channel:
Haeba o sebelisa konopo e le 'ngoe ho transmitter ho bula le e' ngoe ho koala lemati, terata ho ea ka setšoantšo se ka ho le letona holimo ho liteishene tsa PUSH BUTTON STATION ho Pulse Operator Control Board. Ha e se e kentsoe ka nepo 'me e pentiloe le transmitter (bona lehlakore le fapaneng bakeng sa litaelo tsa ho para), konopo e' ngoe le e 'ngoe e hlophisitsoeng e tla etsa mosebetsi oa eona.
Remote Radio Transmitter/Receiver Pairing Instructions Ho kopanya RXTA-100 Receiver ho TXTA-100 Transmitter
Tsoela pele feela haeba moamoheli o kentsoe mohala hantle 'me matla a buletsoe.
Lenaneo le le Leng:

1. Tobetsa konopo ea 'leam' ka thoko ho letšoao la S1 ho moamoheli ho fihlela LED e tsamaisanang le L1 e bulela. Se ke oa tobetsa/programa konopo ea S2 bakeng sa tšebeliso ea mocha o le mong.
2. Tobetsa 'me u tšoare konopo e lakatsehang ho transmitter ho fihlela L1 LED e benya ka makhetlo a 4 ho bonts'a hore o atlehile ho hokahanya. Konopo ea ho lokolla.
3. Tobetsa konopo e hlophisitsoeng ho transmitter bakeng sa netefatso-L1 LED e lokela ho bonesa.
4. Pheta mohato ona ka likonopo tsohle ho transmitter (ho tsamaisana le S1), haeba e sebelisetsoa moamoheli enoa feela.

Dual Channel:

1. Tobetsa konopo ea "ithute" haufi le letšoao la S1 ho moamoheli ho fihlela LED e tsamaisanang le L1 e bulela.
2. Tobetsa 'me u tšoare konopo e lakatsehang ea 'OPEN' ho transmitter ho fihlela L1 LED e benya makhetlo a 4 ho bontša. ho kopanya ho atlehileng. Konopo ea ho lokolla.
3. Tobetsa konopo e hlophisitsoeng ho transmitter bakeng sa netefatso-L1 LED e lokela ho bonesa.
4. Tobetsa konopo ea 'ithute' haufi le letšoao la S2 ho moamoheli ho fihlela L2 LED e tsamaisanang le eona e bulela.
5. Tobetsa 'me u tšoare konopo e lakatsehang ea 'CLOSE' ho transmitter ho fihlela L2 LED e benya ka makhetlo a 4 ho bontša hore e atlehile. Konopo ea ho lokolla.
6. Tobetsa konopo e hlophisitsoeng ho transmitter bakeng sa netefatso-L2 LED e lokela ho bonesa.

TLHOKOMELISO EA PULSE 500+

Kakaretso
Pulse 500-1000 Operators ba na le tiisetso e feletseng bakeng sa nako ea lilemo tse 2 kapa 1,000,000 cycles (ho sa tsotellehe hore na ke efe e tlang pele) ho tloha ka letsatsi la bona la theko. Tiisetso ena e kenyelelitse, 'me ke ekisitsoe ho, likarolo tsohle le mefokolo ea tlhahiso feela,' me ha e koahele ho hloleha ho ka bang teng ka lebaka la matla a kantle ho kenyeletsoa le liphoso tse bakiloeng ke ts'ebetso, ts'ebetso e sa nepahalang le/kapa khokahano.tagsurges le mosebelisi ofe kapa ofe le / kapa liphoso tse bakiloeng ke tikoloho. Tiisetso ena e sebetsa bakeng sa ho nkela sebaka kapa ho lokisoa ha sehlahisoa se nang le bothata feela, 'me ha e kenyelletse mosebetsi ofe kapa ofe o entsoeng bakeng sa ho tlosoa kapa ho kenya likaroloana tse nang le bothata, ho kenya hape sehlahisoa se seng se lokisitsoe, litefiso tsa ho khutlisa sehlahisoa, kapa ditjeho tse ding tse ka bang teng tse amanang le ho se sebetse ha opareitara.Kakaretso ha e fetelle tlhokomelong ya Motor Brushes e lokelang ho nkelwa sebaka ke 200,000 cycles. Botšepehi ba software le ts'ebetso e boetse e koaheloa tlas'a tiisetso ea rona, empa ha e kenyelle lintlafatso tsa software, lintlafatso le/kapa lintlafatso tsa moetlo ntle le haeba e lumelletsoe ka mongolo ke iControls.
Litlaleho
Pele o etsa kopo ea waranti, ka kopo letsetsa Pulse Tech Support ho 1-833-785-7332 le ho kopa thuso ea ho rarolla mathata. U SE KE UA TLOSA SEHLAHISO , ho fihlela u lumelletsoe joalo.
Hlokomela
Ka kopo, iControls e ka boela ea fana ka thuso ea tšimo (litefiso tse ling li ka sebetsa) le / kapa keletso ka ho kenya, ho rarolla mathata, ho ntlafatsa sehlahisoa kapa ntlafatso ea sehlahisoa sa rona. Tlas'a lipehelo tsa tiisetso ena e lekanyelitsoeng, bakeng sa likarolo leha e le life tsa opareitara tse fumanoang li sa sebetse ha li hlahlojoa ke basebetsi ba lumelletsoeng ba iControls, iControls e tla nkela sebaka / e lokise likarolo tsa opareitara tse sa sebetseng. Litefiso tsa basebetsi bakeng sa ho kenya kapa ho lokisa e tla ba boikarabello ba moreki 'me li tlameha ho etsoa ke Morekisi ea lumelletsoeng oa iControls moo ho fumanehang. Tiisetso ena e sebetsa feela ho basebetsi ba profeshenale ba kentsoeng ke morekisi ea lumelletsoeng oa iControls mme ba etsa joalo ka har'a litataiso tsa buka ea ho instola. Tabeng ea hore mofuta o mong oa opareitara kapa karolo e khaotsoe kapa e felloa ke nako, iControls e na le tokelo ea ho khutlisa sehlahisoa ka mokhoa o mong o loketseng.
iControls e ke ke ea ikarabella bakeng sa tšenyo efe kapa efe e ka bang teng kapa ka tšohanyetso. Litiisetso tse ling kaofela, tse boletsoeng kapa tse boletsoeng, ho kenyeletsoa tiisetso efe kapa efe ea thekiso, ka hona li qheletsoe ka thoko. Likarolo tse ling ha li lumelle ho behelloa ka thoko kapa ho behelloa ka thoko ho ts'enyehelo e ka bang teng kapa ka tšohanyetso, ka hona, moeli kapa ho behelloa ka holimo ho kanna ha se sebetse ho uena. Tiisetso ena e o fa ditokelo tse itseng tsa molao, mme o kanna wa ba le ditokelo tse ding tse fapaneng ho ya ka matla a bolaodi. Ho etsa tleleime tlas'a liwaranti tsena,
ikopanye le iControls.
Ho fumana lintlha tse ling, ka kopo ikopanye www.devancocanada.com kapa letsetsa mahala ho 1-855-931-3334

Litokomane / Lisebelisoa

E laola Pulse Series Controller Pulse Red [pdf] Buka ea Mong'a Pulse Series Controller Pulse Red, Pulse Series, Controller Pulse Red, Pulse Red, Red

Litšupiso

• Bukana ea Mosebelisi