Beijer ELECTRONICS GT-3744 Analog Input Module Manual

Sengoliloeng sena se kenyelletsa Temoso, Tlhokomeliso, Tlhokomeliso le matšoao a Bohlokoa moo ho loketseng ho supa lintlha tse amanang le polokeho kapa lintlha tse ling tsa bohlokoa.

Matšoao a tšoanang a lokela ho hlalosoa ka tsela e latelang:

Polokeho

Pele o sebelisa sehlahisoa sena, ka kopo bala bukana ena le libuka tse ling tse amehang ka hloko. Ela hloko ka botlalo litaelo tsa polokeho!
Leha ho le joalo, Beijer Electronics e ke ke ea ikarabella kapa ea ikarabella bakeng sa tšenyo e bakiloeng ke tšebeliso ea sehlahisoa sena.

Litšoantšo, mohlalaampLits'oants'o le litšoantšo bukeng ena li kenyelelitsoe molemong oa ho etsa litšoantšo.
Ka lebaka la mefuta e mengata e fapaneng le litlhoko tse amanang le ts'ebetso efe kapa efe e itseng, Beijer Electronics e ke ke ea nka boikarabello kapa boikarabello bakeng sa ts'ebeliso ea 'nete e ipapisitseng le maemo a khale.amples le litšoantšo.

Setifikeiti sa Sehlahisoa

Sehlahisoa se na le litifikeiti tse latelang.

Litlhoko tse akaretsang tsa polokeho

TLHOKOMELISO: U se ke ua kopanya lihlahisoa le lithapo ka matla a hokahaneng le sistimi. Ho etsa joalo ho baka "arc flash", e ka fellang ka liketsahalo tse kotsi tse sa lebelloang (ho chesa, mollo, lintho tse fofang, khatello ea ho phatloha, ho phatloha ha molumo, mocheso).

Se ke oa ama li-terminal blocks kapa li-module tsa IO ha sistimi e sebetsa. Ho etsa joalo ho ka baka ts'okelo ea motlakase, potoloho e khuts'oane kapa ho se sebetse hantle ha sesebelisoa.
Le ka mohla u se ke ua lumella lintho tsa tšepe tse ka ntle ho ama sehlahisoa ha tsamaiso e ntse e sebetsa. Ho etsa joalo ho ka baka ts'okelo ea motlakase, potoloho e khuts'oane kapa ho se sebetse hantle ha sesebelisoa.
U se ke ua beha sehlahisoa haufi le thepa e tukang. Ho etsa joalo ho ka baka mollo.
Mosebetsi oohle oa lithapo o lokela ho etsoa ke moenjiniere oa motlakase.
Ha u sebetsana le li-module, etsa bonnete ba hore batho bohle, sebaka sa mosebetsi le ho paka li thehiloe hantle.
Qoba ho ama likarolo tsa conductive, Li-module li na le likarolo tsa elektronike tse ka 'nang tsa senngoa ke ho tsoa ha electrostatic.
TLHOKOMELISO: Le ka mohla u se ke ua sebelisa sehlahisoa libakeng tse nang le mocheso o fetang 60℃. Qoba ho beha sehlahisoa letsatsing le tobileng.
Le ka mohla u se ke ua sebelisa sehlahisoa libakeng tse nang le mongobo o fetang 90%.
Kamehla sebelisa sehlahisoa libakeng tse nang le tekanyo ea 1 kapa 2 ea tšilafalo.
Sebelisa likhoele tse tloaelehileng bakeng sa likhoele.

Mabapi le Sistimi ea letoto la G

Sistimi e felileview

Network Adapter Module - Mojule oa adaptara ea marang-rang o theha sehokelo lipakeng tsa bese ea tšimo le lisebelisoa tsa masimong tse nang le li-module tsa katoloso.
Khokahano ho litsamaiso tse fapaneng tsa libese tsa masimong e ka theoa ke e 'ngoe le e' ngoe ea li-module tsa adaptara ea marang-rang tse tsamaellanang, mohlala, bakeng sa MODBUS TCP, Ethernet IP, EtherCAT, PROFINET, CC-Link IE Field, PROFIBUS, CANopen, DeviceNet, CC-Link, MODBUS/Serial, joalo-joalo.
Katoloso Mojule - Mefuta ea li-module tsa katoloso: Digital IO, Analog IO, le li-module tse khethehileng.
Ho romella melaetsa - Sistimi e sebelisa mefuta e 'meli ea melaetsa: Melaetsa ea litšebeletso le melaetsa ea IO.

IO Process Data Mapping

Mojule oa katoloso o na le mefuta e meraro ea data: data ea IO, paramente ea tlhophiso, le lirejistara tsa memori.
Phapanyetsano ea data pakeng tsa adaptara ea marang-rang le li-module tsa ho atolosa li etsoa ka data ea setšoantšo sa IO ka protocol ea ka hare.
Phallo ea data lipakeng tsa adaptara ea marang-rang (li-slots tse 63) le li-module tsa katoloso

Lintlha tsa setšoantšo le se hlahisoang li itšetlehile ka sebaka sa slot le mofuta oa data oa slot ea ho atolosa. Ho hlophisoa ha data ea setšoantšo sa ho kenya le ho tsoa ho ipapisitse le boemo ba sekotjana sa katoloso.
Lipalo tsa tlhophiso ena li kenyelelitsoe libukeng tsa li-adapter tsa netweke le li-programmable IO modules.
Lintlha tse sebetsang tsa parameter li ipapisitse le li-module tse sebelisoang. Bakeng sa mohlalaample, li-module tsa analoge li na le li-setting tsa 0-20 mA kapa 4-20 mA, 'me li-module tsa mocheso li na le li-setting tse kang PT100, PT200, le PT500.

Litokomane tsa module ka 'ngoe li hlalosa data ea parameter.

Litlhaloso

Litlhaloso tsa Tikoloho

Mocheso oa ho sebetsa	-20°C – 60°C
UL mocheso	-20°C – 60°C
Mocheso oa polokelo	-40°C – 85°C
Mongobo o amanang	5% - 90% e sa lumellaneng
Ho phahamisa	DIN seporo
Ts'ebetso ea ts'oenyeho	IEC 60068-2-27 (15G)
Khanyetso ea ho thothomela	IEC 60068-2-6 (4 g)
Likhase tsa indasteri	EN 61000-6-4: 2019
Tšireletso ea indasteri	EN 61000-6-2: 2019
Boemo ba ho kenya	E otlolohileng le e tshekaletseng
Setifikeiti sa lihlahisoa	CE, FCC, UL, cUL

Tlhaloso e Akaretsang

Ho felloa ke matla	Max. 120 mA @ 5 VDC
Ho behwa ka thoko	I/O ho logic: Ho itšehla thajana Matla a lebaleng: Ha a hokahane
Matla a tšimo	Ha e sebelisoe, feta ho mojulung o latelang oa katoloso
Wiring	I/O cable max. 0.823 mm2 (AWG 18)
Boima ba 'mele	64 g
Boholo ba module	12 mm x 109 mm x 70 mm

Litekanyo

Litekanyo tsa module (mm)

Tlhaloso ea Kenyeletso

Lintho tse kenang ka mojule	4 likanale
Lisupa (lehlakore la logic)	4 boemo ba ho kenya botala

Lintho tse kenang ka mojule

4 likanale

Mefuta ea li-sensor

Mofuta oa ho kenya RTD

Tlhahiso ea RTD	Input mefuta e fapaneng
PT50, PT100, PT200, PT500, PT1000	-200 - 850 °C
JPT50, JPT100, JPT200, JPT500, JPT1000	-200 - 640 °C
NI100, NI200, NI500, NI1000	-60 - 250 °C
NI120	-80 - 260 °C
Cu10, Cu100	-100 - 260 °C
NI1000LG	-50 - 120 °C

Kenyeletso ea ho hanyetsa

Input mefuta e fapaneng

1 Ω/bit

0 - 4000 Ω

100 mΩ/bit

0 - 2000 Ω

10 mΩ/bit

0 - 327 Ω

20 mΩ/bit

0 - 620 Ω

50 mΩ/bit

0 - 1200 Ω

Monate wa boithatelo

Hoo e ka bang 0.5 mA

Mokhoa oa ho hokahanya

4-terata

Nako ea ho sokoloha

<60 ms / likanale tsohle

Sebopeho sa data

16-bit palo e felletseng e saennoeng (2′ tlatsetso)

Ho nepahala ha mojule

PT50, JPT50, NI100, NI120 : ±0.3% sekala se felletseng @ 25 ℃

PT50, JPT50, NI100, NI120 : ±0.5% sekala se felletseng @ -40,70 ℃

PT1000: ±0.3 ℃ ho 50 – 150 ℃ @ 25 ℃ tikoloho

PT1000: ±0.5 ℃ ho 50 – 150 ℃ @ -40, 70 ℃ tikoloho

PT1000: ±0.5 ℃ ho -200 – 250 ℃ @ 25 ℃ ambient Cu10: ±2 % sekala se felletseng @ 25 ℃ tikoloho

Cu10: ±4 % sekala se felletseng @ -40, 70 ℃ ambient Cu100: ±0.3 % sekala se felletseng @ 25 ℃ ambient Cu100: ±0.5 % sekala se felletseng @ -40, 70 ℃ tikoloho Mefuta eohle ea ho kenya:

• ±0.1 % sekala se felletseng @ 25 ℃ tikoloho

• ±0.3 % sekala se felletseng @ -40 – 70 ℃

Qeto ea data

Mofuta oa RTD : ±0.1 ℃ / F , Mofuta oa ho hanyetsa: 1 Ω, 100 mΩ, 10 mΩ, 20 mΩ, 50 mΩ

Tekanyetso

Ha ho hlokahale

Tlhahlobo

Sensor e bulehile kapa e arolelane holimo, ebe data ea phetoho = 0x8000(-32768)

Setšoantšo sa Wiring

Tšoaea no.	Tlhaloso ea lets'oao
0	Lekanale la RTD 0 R+1
1	Lekanale la RTD 0 R+2
2	RTD mocha oa 0 R-1
3	RTD mocha oa 0 R-2
4	Lekanale la RTD 1 R+1
5	Lekanale la RTD 1 R+2
6	RTD mocha oa 1 R-1
7	RTD mocha oa 1 R-2
8	Lekanale la RTD 2 R+1
9	Lekanale la RTD 2 R+2
10	RTD mocha oa 2 R-1
11	RTD mocha oa 2 R-2
12	Lekanale la RTD 3 R+1
13	Lekanale la RTD 3 R+2
14	RTD mocha oa 3 R-1
15	RTD mocha oa 3 R-2
16	TS'OANANG
17	TS'OANANG

Letšoao la LED

Nomoro ea LED.	LED mosebetsi/tlhaloso	Mmala oa LED
Boemo	Boemo ba G-Bus	Botala

Boemo ba Channel ea LED

Boemo	LED	Pontsho
Boemo ba G-Bus	TLOA	Ho khaoha
Boemo ba G-Bus	Botala	Khokahano

Ho etsa 'mapa oa data ho Tafole ea Litšoantšo

Kenya data ea Mojule

Kenyelletso ea Analog Ch 0

Kenyelletso ea Analog Ch 1

Kenyelletso ea Analog Ch 2

Kenyelletso ea Analog Ch 3

Kenya Boleng ba Litšoantšo

Nonyana e nyane.	hanyane 7	hanyane 6	hanyane 5	hanyane 4	hanyane 3	hanyane 2	hanyane 1	hanyane 0
Byte 0	Kenyelletso ea Analog Ch 0 low byte
Byte 1	Kenyelletso ea Analog Ch 0 high byte
Byte 2	Kenyelletso ea Analog Ch 1 low byte
Byte 3	Kenyelletso ea Analog Ch 1 high byte
Byte 4	Kenyelletso ea Analog Ch 2 low byte
Byte 5	Kenyelletso ea Analog Ch 2 high byte
Byte 6	Kenyelletso ea Analog Ch 3 low byte
Byte 7	Kenyelletso ea Analog Ch 3 high byte

HLOKOMELA: Haeba tlhahiso ea mocha e bulehile kapa e fetisitsoe ho feta tekano, data ea eona ea phetoho e tla ba 0x800032678.

Configuration Parameter 10 byte

Byte	Decimal bit	Tlhaloso	Boleng ba kamehla
0	00-07	Mofuta oa sensor ea khetho =00h:PT100, 0.00385, -200 - 850 °C, 0.1 °C / palo =01h:PT200, 0.00385, -200 – 850 °C, 0.1 °C/palo =02h:PT500, 0.00385, -200 – 850 °C, 0.1 °C/palo =03h:PT1000, 0.00385, -200 – 850 °C, 0.1 °C/palo =04h:PT50, 0.00385, -200 – 850 °C, 0.1 °C/palo =10h:JPT100, 0.003916, -200 - 640 °C, 0.1 °C / palo =11h:JPT200, 0.003916, -200 - 640 °C, 0.1 °C / palo =12h:JPT500, 0.003916, -200 - 640 °C, 0.1 °C / palo =13h:JPT1000, 0.003916, -200 - 640 °C, 0.1 °C / palo =14h:JPT50, 0.003916, -200 - 640 °C, 0.1 °C / palo =20h:NI100, 0.00618, -60 - 250 °C, 0.1 °C/palo =21h:NI200, 0.00618, -60 - 250 °C, 0.1 °C/palo =22h:NI500, 0.00618, -60 - 250 °C, 0.1 °C/palo =23h:NI1000, 0.00618, -60 - 250 °C, 0.1 °C/palo =30h:NI120, 0.00672, -80 - 260 °C, 0.1 °C/palo =40h:Cu10, 0.00427, -100 - 260 °C, 0.1 °C/palo =41h:Cu100, 0.00427, -100 - 260 °C, 0.1 °C/palo =53h:NI1000LG, 0.00500, -50 - 120 °C, 0.1 °C/palo =80h: Kenyelletso ea Khanyetso, 1 – 2000 Ω, 100 mΩ /1count =81h: Kenyelletso ea Khanyetso, 1 – 327 Ω, 10 mΩ /1count =82h: Kenyelletso ea Khanyetso, 1 – 620 Ω, 20 mΩ /1count =83h: Kenyeletso ya Khanyetso, 1 – 1200 Ω, 50 mΩ/1count =84h: Kenyeletso ya Khanyetso, 1 – 4000 Ω, 1 Ω/1count =Ba bang: Behiloe	0: PT100
1	00	Mofuta oa mocheso: 0: Celsius (°C) 1: Fahrenheit (°F)	00: Celsius (°C)
	01	Reserved	0
	02 - 03	Qeto ea data: 00: 0.1 ℃, ℉/bit 01: 1 ℃, ℉/bit 10: 0.01 ℃, ℉/bit * 11: E bolokiloe	0

Byte	Decimal bit	Tlhaloso	Boleng ba kamehla
	04	Mofuta oa sefe: 0: Sesefa se tloaelehileng 1: Sefahla se ntlafalitsoeng	0: Sesefa se tloaelehileng
	05-06	Sesefa sa SW: 0: Sesefa se tloaelehileng (nako ea filthara = 20) 1: Sesefa se potlakileng (nako ea filthara = 3) ** 2: Filter e ntlafalitsoeng (nako ea ho sefa = 40) 3: Filter e ntlafalitsoeng haholoanyane (nako ea filthara = 80)	0
	07	Reserved	0
2-3		CH0 boleng ba ho fokotsa	0
4-5		CH1 boleng ba ho fokotsa	0
6-7		CH2 boleng ba ho fokotsa	0
8-9		CH3 boleng ba ho fokotsa	0

Lintlha tse fetang 32767 ha li khone ho hlahisoa.
Haeba filthara e potlakileng e setiloe, ho ka 'na ha se ke ha fihleloa ho nepahala ha lintlha.

Boleng ba Lintlha

Sebaka sa ho kenya mochine oa ho hanyetsa mocheso oa ho hanyetsa

Mofuta	Input mefuta e fapaneng
PT100	-200 – 850 ℃
PT200	-200 – 850 ℃
PT500	-200 – 850 ℃
PT1000	-200 – 850 ℃
PT50	-200 – 850 ℃
JPT100	-200 - 640 ℃
JPT200	-200 - 640 ℃
JPT500	-200 - 640 ℃
JPT1000	-200 - 640 ℃
JPT50	-200 - 640 ℃
NI100	-60 – 250 ℃
NI200	-60 – 250 ℃
NI500	-60 – 250 ℃
NI1000	-60 – 250 ℃
NI120	-80 – 260 ℃
Cu10	-100 – 260 ℃
Cu100	-100 – 260 ℃
NI1000LG	-50 – 120 ℃

Boemo ba ho hanyetsa

Mofuta	Input mefuta e fapaneng
1 Ω/bit	0 - 4000 Ω
100 mΩ/bit	0 - 2000 Ω
10 mΩ/bit	0 - 327 Ω
20 mΩ/bit	0 - 620 Ω
50 mΩ/bit	0 - 1200 Ω

Ho hlophisoa ha Hardware

TLHOKOMELO Bala khaolo ena kamehla pele o kenya module!
Sebaka se chesang! Bokaholimo ba ntlo bo ka chesa nakong ea ts'ebetso. Haeba sesebelisoa se sebelisoa mochesong o phahameng oa tikoloho, kamehla tlohela sesebelisoa hore se phomole pele u se tšoara.

Ho sebetsa ka lisebelisoa tse matlafalitsoeng ho ka senya thepa! Kamehla tima motlakase pele o sebetsa sesebelisoa.

Litlhoko tsa Sebaka

Litšoantšo tse latelang li bontša litlhoko tsa sebaka ha u kenya li-module tsa G-Series.

Sekheo se theha sebaka sa moea le ho thibela tšitiso e etsoang ke electromagnetic ho susumetsa ts'ebetso.
Boemo ba ho instola bo nepahetse ho ea holimo le ka holimo. Litšoantšo li na le litšoantšo 'me li ka 'na tsa se ke tsa lekana.
TLHOKOMELISO: HO SE latele ditlhoko tsa sebaka ho ka baka ho senya sehlahisoa.

Mount Module ho DIN Rail

Likhaolo tse latelang li hlalosa mokhoa oa ho kenya mojule seporong sa DIN.
TLHOKOMELO Mojule o tlameha ho ts'oaroa ho seporo sa DIN ka lithapo tsa ho notlela.

Thaba ea GL-9XXX kapa GT-XXXX Module

Litaelo tse latelang li sebetsa mefuteng ena ea li-module.
GL-9XXX

GT-1XXX
GT-2XXX
GT-3XXX

GT-4XXX
GT-5XXX
GT-7XXX

GN-9XXX li-module li na le lisebelisoa tse tharo tsa ho notlela: e 'ngoe e ka tlase le e 'meli ka lehlakoreng. Bakeng sa litaelo tsa ho holisa, sheba Mount GN-9XXX Module.
Namela seporong sa DIN
Theoha ho tloha seporong sa DIN

Thaba ea GN-9XXX Module

Ho kenya kapa ho theola adaptara ea netweke kapa mojule oa IO o ka sebelisoang ka lebitso la sehlahisoa GN-9XXX, bakeng sa mohlala.ample GN-9251 kapa GN-9371, bona litaelo tse latelang.
Namela seporong sa DIN

Theoha ho tloha seporong sa DIN

Mount Removable Terminal Block

Ho hloma kapa ho theola "terminal block" (RTB), sheba litaelo tse ka tlase.

Hloma block block e ka ntshuwang
Theola borokho bo ka ntshuwang

Hokela Lithapo ho Thibelo ea Removable Terminal Block

Ho hokela/ho hakolla lithapo ho/ho tloha borokhong bo ka ntshuwang (RTB), sheba ditaelo tse ka tlase.
TLHOKOMELISO: Kamehla sebelisa tlhahiso e khothaletsoang voltage le makhetlo a mangata ho thibela tšenyo ea lisebelisoa le ho netefatsa ts'ebetso e nepahetseng.
Hokela thapo

Hakolla thapo

Matla a Tšimo le Lithako tsa Lintlha

Puisano pakeng tsa adapter ea marang-rang ea G-Series le module ea ho atolosa, hammoho le tsamaiso / matla a tšimo ea li-module tsa libese, e etsoa ka bese ea ka hare. E na le 2 Field Power Pins le 6 Data Pins.

TLHOKOMELISO: Se ke oa ama lintlha le lithakhisa tsa matla a tšimo! Ho ama ho ka fella ka ho silafatsoa le ho senyeha ka lerata la ESD.

Tšoaea no.	Lebitso	Tlhaloso
P1	Sistimi ea VCC	Phepelo ea sistimi voltage (5 VDC)
P2	Sistimi ea GND	Sebaka sa tsamaiso
P3	Sephetho sa token	Boema-kepe ba token ea module ea processor
P4	Tlhahiso ea serial	Transmitter port port ea module ea processor
P5	Tlhahiso ea serial	Boema-kepe ba ho amohela mojule oa processor
P6	Reserved	E boloketsoe token ea bypass
P7	Tšimong GND	Sebaka sa tšimo
P8	Sebaka sa VCC	Phepelo ea masimong voltage (24 VDC)

Copyright

Lintlha tse tokomaneng ena li ka fetoha ntle le tsebiso mme li fanoa joalo ka ha li fumaneha ka nako ea khatiso. Beijer Electronics AB e na le tokelo ea ho fetola tlhahisoleseding leha e le efe ntle le ho ntlafatsa khatiso ena.
Beijer Electronics AB ha e nke boikarabello bakeng sa liphoso leha e le life tse ka hlahang tokomaneng ena. Tsohle exampLes tokomaneng ena e reretsoe feela ho ntlafatsa kutloisiso ea ts'ebetso le ts'ebetso ea lisebelisoa.
Beijer Electronics AB e ke ke ea nka boikarabelo leha e le bofe haeba tsena e le tsa peleamples li sebelisoa lits'ebetsong tsa 'nete.

Ka lebaka la mefuta e mengata ea lits'ebetso tsa software ena, basebelisi ba tlameha ho fumana tsebo e lekaneng ho netefatsa hore e sebelisoa ka nepo ts'ebelisong ea bona e ikhethileng.
Batho ba ikarabellang bakeng sa kopo le lisebelisoa ba tlameha ho netefatsa hore kopo e 'ngoe le e 'ngoe e lumellana le litlhoko tsohle tse amehang, litekanyetso le melao mabapi le tlhophiso le polokeho.
Beijer Electronics AB e ke ke ea amohela boikarabello bakeng sa tšenyo leha e le efe e etsahetseng nakong ea ho kenya kapa ho sebelisoa ha thepa e boletsoeng tokomaneng ena. Beijer Electronics AB e thibela liphetoho tsohle, liphetoho, kapa phetolo ea lisebelisoa.

Ntlo-kholo
Beijer Electronics AB
Lebokose la 426

201 24 Malmö, Sweden
www.beijerelectronics.com
+46 40 358600

LBH

P: Lipontšo tsa LED mojuleng li bolela eng?
- A: Lipontšo tsa LED li bonts'a boemo ba matšoao a kenyelletso ea module.
- Sheba buka ea mosebelisi bakeng sa tlhaiso-leseling e batsi mabapi le ho toloka mats'oao a LED.

Q: Na nka sebelisa GT-3744 Analog Input Module le litsamaiso tse ling?
- A: GT-3744 Analog Input Module e etselitsoe ka kotloloho hore e sebelisoe le sistimi ea G-Series.
- Ho lumellana le litsamaiso tse ling ho ka 'na ha fapana, kahoo ho kgothaletswa ho buisana le ts'ehetso ea tekheniki pele o e kopanya le tsamaiso e fapaneng.

Litokomane / Lisebelisoa

Beijer ELECTRONICS GT-3744 Analog Input Module [pdf] Bukana ea Mosebelisi
GT-3744 Analog Input Module, GT-3744, Analog Input Module, Input Module, Mojule

Litšupiso

Bukana ea Mosebelisi

Beijer ELECTRONICS GT-3744 Analog Input Module

Litaelo tsa Tšebeliso ea Sehlahisoa

Mabapi le Bukana ena