Abubuwan da ke ciki
boye
Beijer ELECTRONICS GT-3744 Analog Input Module
Ƙayyadaddun bayanai
- Samfura: GT-3744 Analog Input Module
- Tashoshi: 4
- Nau'in Input: 4-Way RTD/Resistance
- Tasha: 18 pt m tasha
Umarnin Amfani da samfur
Shigarwa
- Tabbatar cewa an kashe wutar tsarin kafin shigarwa.
- Haɗa tsarin shigar da analog ɗin zuwa ramin da ya dace a cikin tsarin G-jerin.
- Ajiye ƙirar ƙirar a wurin don hana kowane motsi.
Saita
- Koma zuwa zanen wayoyi a cikin littafin jagorar mai amfani don yin waya daidai siginar shigarwa.
- Bincika alamun LED don tabbatar da aiki mai kyau.
- Saita software na tsarin don ganewa da mu'amala tare da tsarin shigar da analog.
Amfani
- Bayan shigarwa da saitin, samar da siginar shigarwar da ake bukata zuwa tsarin.
- Saka idanu da karatun bayanai daga abubuwan shigar analog ta hanyar haɗin tsarin.
- Bincika tsarin koyaushe don kowane alamun lalacewa ko rashin aiki.
Game da Wannan Jagoran
- Wannan littafin ya ƙunshi bayani kan software da kayan masarufi na Beijer Electronics GT-3744 Analog Input Module.
- Yana ba da ƙayyadaddun bayanai masu zurfi da jagora akan shigarwa, saiti, da amfani da samfurin.
Alamomin da Aka Yi Amfani da su a cikin Wannan Jagoran
- Wannan ɗaba'ar ya haɗa da Gargaɗi, Tsanaki, Bayanan kula da gumaka masu mahimmanci inda suka dace don nuna masu alaƙa da aminci ko wasu mahimman bayanai.
Ya kamata a fassara alamomin da suka dace kamar haka:
Tsaro
- Kafin amfani da wannan samfurin, da fatan za a karanta wannan jagorar da sauran littattafan da suka dace a hankali. Biya cikakken hankali ga umarnin aminci!
- Babu wani abu da Beijer Electronics zai kasance da alhakin ko alhakin lalacewa sakamakon amfani da wannan samfurin.
- Hotunan, examples da zane-zane a cikin wannan jagorar an haɗa su don dalilai na misali.
- Saboda yawancin masu canji da buƙatun da ke da alaƙa da kowane takamaiman shigarwa, Beijer Electronics ba zai iya ɗaukar nauyi ko alhaki don ainihin amfani dangane da tsohonamples da zane-zane.
Takaddun shaida na samfur
Samfurin yana da takaddun shaida masu zuwa.
Janar Bukatun Tsaro
- GARGADI: Kada a haɗa samfuran da wayoyi tare da wutar da aka haɗa da tsarin. Yin haka yana haifar da “bakin filashi”, wanda zai iya haifar da al’amura masu haɗari da ba zato ba tsammani (ƙonawa, wuta, abubuwa masu tashi, matsa lamba, fashewar sauti, zafi).
- Kar a taɓa tubalan tasha ko na'urorin IO lokacin da tsarin ke gudana. Yin hakan na iya haifar da girgiza wutar lantarki, gajeriyar kewayawa ko rashin aiki na na'urar.
- Kada ka bari abubuwan ƙarfe na waje su taɓa samfurin lokacin da tsarin ke gudana. Yin hakan na iya haifar da girgiza wutar lantarki, gajeriyar kewayawa ko rashin aiki na na'urar.
- Kada ka sanya samfurin kusa da abu mai ƙonewa. Yin hakan na iya haifar da gobara.
- Duk aikin wayoyi ya kamata injiniyan lantarki ya yi.
- Lokacin sarrafa kayan aikin, tabbatar da cewa duk mutane, wurin aiki, da maruƙan sun yi ƙasa sosai.
- Ka guji taɓa abubuwan da aka haɗa, Modulolin sun ƙunshi abubuwan lantarki waɗanda za a iya lalata su ta hanyar fitarwar lantarki.
- HANKALI: Kada a taɓa amfani da samfurin a cikin yanayin zafi sama da 60 ℃. Guji sanya samfurin a cikin hasken rana kai tsaye.
- Kada a taɓa amfani da samfurin a cikin mahallin sama da 90% zafi.
- Yi amfani da samfur koyaushe a cikin mahalli tare da gurɓataccen digiri 1 ko 2.
- Yi amfani da madaidaicin igiyoyi don yin wayoyi.
Game da Tsarin G-jerin
Tsarin ya ƙareview
- Module Adaftar hanyar sadarwa - Tsarin adaftar cibiyar sadarwa yana samar da hanyar haɗin kai tsakanin bas ɗin filin da na'urorin filin tare da kayan haɓakawa.
- Ana iya kafa haɗin kai zuwa tsarin bas na filin daban-daban ta kowane nau'ikan adaftar hanyar sadarwa masu dacewa, misali, don MODBUS TCP, Ethernet IP, EtherCAT, PROFINET, CC-Link IE Field, PROFIBUS, CANopen, DeviceNet, CC-Link, MODBUS/Serial, da sauransu.
- Module Fadada - nau'ikan nau'ikan haɓakawa: Digital IO, Analog IO, da kayayyaki na musamman.
- Saƙo - Tsarin yana amfani da saƙo iri biyu: Saƙon sabis da saƙon IO.
IO Tsarin Taswirar Bayanai
- Tsarin fadada yana da nau'ikan bayanai guda uku: bayanan IO, sigogin daidaitawa, da rajistar ƙwaƙwalwar ajiya.
- Ana yin musayar bayanai tsakanin adaftar cibiyar sadarwa da tsarin haɓakawa ta hanyar aiwatar da bayanan hoto na IO ta hanyar yarjejeniya ta ciki.
- Gudun bayanai tsakanin adaftan cibiyar sadarwa (ramummuka 63) da kuma abubuwan haɓakawa
- Bayanan bayanan shigarwa da fitarwa sun dogara ne akan matsayin ramin da nau'in bayanai na ramin fadadawa. Yin odar shigarwa da fitarwa bayanan hoto yana dogara ne akan matsayi na faɗaɗawa.
- Lissafi don wannan tsari an haɗa su a cikin litattafan adaftar cibiyar sadarwa da tsarin IO masu shirye-shirye.
- Ingantattun bayanan siga ya dogara da samfuran da ake amfani da su. Domin misaliample, na'urorin analog suna da saitunan ko dai 0-20 mA ko 4-20 mA, kuma na'urorin zafin jiki suna da saituna kamar PT100, PT200, da PT500.
- Takaddun bayanai na kowane nau'i yana bayyana bayanan siga.
Ƙayyadaddun bayanai
Ƙayyadaddun Muhalli
| Yanayin aiki | -20°C – 60°C |
| UL zafin jiki | -20°C – 60°C |
| Yanayin ajiya | -40°C – 85°C |
| Dangi zafi | 5%-90% ba condensing |
| Yin hawa | DIN dogo |
| Shock aiki | IEC 60068-2-27 (15G) |
| Juriya na rawar jiki | IEC 60068-2-6 (4 g) |
| Fitar masana'antu | EN 61000-6-4: 2019 |
| Kariyar masana'antu | EN 61000-6-2: 2019 |
| Matsayin shigarwa | A tsaye da a kwance |
| Takaddun shaida na samfur | CE, FCC, UL |
Ƙididdigar Gabaɗaya
| Rashin wutar lantarki | Max. 120mA @ 5 VDC |
| Kaɗaici | I/O zuwa dabaru: Warewa
Ikon filin: Ba a haɗa shi ba |
| Ƙarfin filin | Ba a yi amfani da shi ba, ƙetare zuwa tsarin fadada na gaba |
| Waya | I/O na USB max. 0.823 mm2 (AWG 18) |
| Nauyi | 64g ku |
| Girman module | 12 x 109 mm x 70 mm |
Girma
Girman module (mm)
Ƙayyadaddun shigarwa
| Abubuwan shigarwa kowane module | 4 tashoshi |
| Manuniya (gefen dabaru) | Matsayin shigarwar kore 4 |
| Abubuwan shigarwa kowane module | 4 tashoshi | |||||||||||||||||
| Nau'in firikwensin | kewayon shigarwar RTD
|
|||||||||||||||||
| Shigar da juriya | Kewayon shigarwa | |||||||||||||||||
| 1 Ω/bit | 0 - 4000 Ω | |||||||||||||||||
| 100mΩ/bit | 0 - 2000 Ω | |||||||||||||||||
| 10mΩ/bit | 0 - 327 Ω | |||||||||||||||||
| 20mΩ/bit | 0 - 620 Ω | |||||||||||||||||
| 50mΩ/bit | 0 - 1200 Ω | |||||||||||||||||
| Tashin hankali halin yanzu | Kusan 0.5mA | |||||||||||||||||
| Hanyar haɗi | 4-waya | |||||||||||||||||
| Lokacin juyawa | <60 ms/duk tashoshi | |||||||||||||||||
| Tsarin bayanai | 16-bit sa hannu lamba (2' cikakke) | |||||||||||||||||
| daidaiton tsarin | PT50, JPT50, NI100, NI120: ± 0.3% cikakken sikelin @ 25 ℃
PT50, JPT50, NI100, NI120 : ± 0.5% cikakken sikelin @ -40,70 ℃ PT1000: ± 0.3 ℃ a 50 - 150 ℃ @ 25 ℃ na yanayi PT1000: ± 0.5 ℃ a 50 - 150 ℃ @ -40, 70 ℃ na yanayi PT1000: ± 0.5 ℃ a -200 - 250 ℃ @ 25 ℃ na yanayi Cu10: ± 2 % cikakken sikelin @ 25 ℃ na yanayi Cu10: ± 4 % cikakken sikelin @ -40, 70 ℃ na yanayi Cu100: ± 0.3 % cikakken sikelin @ 25 ℃ na yanayi Cu100: ± 0.5 % cikakken sikelin @ -40, 70 ℃ na yanayi Duk kewayon shigar da nau'in: • ± 0.1 % cikakken sikelin @ 25 ℃ na yanayi • ± 0.3 % cikakken ma'auni @ -40 - 70 ℃ |
|||||||||||||||||
| Ƙaddamar da bayanai | Nau'in RTD: ± 0.1 ℃ / F, Nau'in juriya: 1 Ω, 100 mΩ, 10 mΩ, 20 mΩ, 50 mΩ | |||||||||||||||||
| Daidaitawa | Ba a buƙata | |||||||||||||||||
| Bincike | Sensor yana buɗewa ko kewayo, sannan bayanan juyawa = 0x8000(-32768) | |||||||||||||||||
Tsarin Waya
| Fil babu. | Bayanin sigina |
| 0 | RTD tashar 0 R+1 |
| 1 | RTD tashar 0 R+2 |
| 2 | tashar RTD 0 R-1 |
| 3 | tashar RTD 0 R-2 |
| 4 | RTD tashar 1 R+1 |
| 5 | RTD tashar 1 R+2 |
| 6 | tashar RTD 1 R-1 |
| 7 | tashar RTD 1 R-2 |
| 8 | RTD tashar 2 R+1 |
| 9 | RTD tashar 2 R+2 |
| 10 | tashar RTD 2 R-1 |
| 11 | tashar RTD 2 R-2 |
| 12 | RTD tashar 3 R+1 |
| 13 | RTD tashar 3 R+2 |
| 14 | tashar RTD 3 R-1 |
| 15 | tashar RTD 3 R-2 |
| 16 | AGND |
| 17 | AGND |
Alamar LED
| LED no. | Ayyukan LED / bayanin | LED launi |
| Matsayi | Matsayin G-Bus | Kore |
Matsayin Tashoshin LED
| Matsayi | LED | Nuni |
| Matsayin G-Bus | KASHE | Katsewa |
| Kore | Haɗin kai |
Taswirar Bayanai a cikin Teburin Hoto
Bayanan Module na shigarwa
| Shigarwar Analog Ch 0 |
| Shigarwar Analog Ch 1 |
| Shigarwar Analog Ch 2 |
| Shigarwar Analog Ch 3 |
Shigar da ƙimar Hoton
| Bit no. | Bit 7 | Bit 6 | Bit 5 | Bit 4 | Bit 3 | Bit 2 | Bit 1 | Bit 0 |
| Baiti 0 | Shigarwar Analog Ch 0 ƙananan byte | |||||||
| Baiti 1 | Shigarwar Analog Ch 0 babban byte | |||||||
| Baiti 2 | Shigarwar Analog Ch 1 ƙananan byte | |||||||
| Baiti 3 | Shigarwar Analog Ch 1 babban byte | |||||||
| Baiti 4 | Shigarwar Analog Ch 2 ƙananan byte | |||||||
| Baiti 5 | Shigarwar Analog Ch 2 babban byte | |||||||
| Baiti 6 | Shigarwar Analog Ch 3 ƙananan byte | |||||||
| Baiti 7 | Shigarwar Analog Ch 3 babban byte | |||||||
- NOTE: Idan shigar da tashar ta kasance a buɗe ko ta wuce kima, bayanan juyar da shi zai zama 0x800032678.
Sigar Kanfigareshan 10 byte
| Byte | Decimal bit | Bayani | Ƙimar ta asali |
| 0 | 00-07 | Nau'in firikwensin zaɓi
= 00h: PT100, 0.00385, -200 - 850 °C, 0.1 °C / ƙidaya = 01h: PT200, 0.00385, -200 - 850 °C, 0.1 °C/ƙidaya = 02h: PT500, 0.00385, -200 - 850 °C, 0.1 °C/ƙidaya = 03h: PT1000, 0.00385, -200 - 850 °C, 0.1 °C/ƙidaya = 04h: PT50, 0.00385, -200 - 850 °C, 0.1 °C/ƙidaya = 10h: JPT100, 0.003916, -200 - 640 °C, 0.1 °C/ƙidaya = 11h: JPT200, 0.003916, -200 - 640 °C, 0.1 °C/ƙidaya = 12h: JPT500, 0.003916, -200 - 640 °C, 0.1 °C/ƙidaya = 13h: JPT1000, 0.003916, -200 - 640 °C, 0.1 °C/ƙidaya = 14h: JPT50, 0.003916, -200 - 640 °C, 0.1 °C/ƙidaya = 20h: NI100, 0.00618, -60 - 250 °C, 0.1 °C/ƙidaya = 21h: NI200, 0.00618, -60 - 250 °C, 0.1 °C/ƙidaya = 22h: NI500, 0.00618, -60 - 250 °C, 0.1 °C/ƙidaya = 23h: NI1000, 0.00618, -60 - 250 °C, 0.1 °C/ƙidaya = 30h: NI120, 0.00672, -80 - 260 °C, 0.1 °C/ƙidaya = 40h: Cu10, 0.00427, -100 - 260 °C, 0.1 °C/ƙidaya = 41h: Cu100, 0.00427, -100 - 260 °C, 0.1 °C/ƙidaya = 53h: NI1000LG, 0.00500, -50 - 120 °C, 0.1 °C/ƙidaya = 80h: Shigar juriya, 1 - 2000 Ω, 100 mΩ / 1count = 81h: Shigar juriya, 1 - 327 Ω, 10 mΩ / 1count = 82h: Shigar juriya, 1 - 620 Ω, 20 mΩ / 1count = 83h: Shigar juriya, 1 - 1200 Ω, 50 mΩ/1 ƙidaya = 84h: Shigarwar juriya, 1 - 4000 Ω, 1 Ω/1count =Sauran: Ajiye |
0: PT100 |
| 1 | 00 | Nau'in zafin jiki: 0: Celsius (°C)
1: Fahrenheit (°F) |
00: Celsius (°C) |
| 01 | Ajiye | 0 | |
| 02-03 | Ƙimar bayanai: 00: 0.1 ℃, ℉/bit
01: 1 ℃, ℉/bit 10: 0.01 ℃, ℉/bit * 11: Ajiye |
0 |
| Byte | Decimal bit | Bayani | Ƙimar ta asali |
| 04 | Nau'in tacewa:
0: Tace ta al'ada 1: Ingantaccen tacewa |
0: Tace ta al'ada | |
| 05-06 | SW tace:
0: Tace ta al'ada (lokacin tacewa = 20) 1: Tace mai sauri (lokacin tacewa = 3) ** 2: Ingantaccen tacewa (lokacin tacewa = 40) 3: Karin ingantaccen tacewa (lokacin tacewa = 80) |
0 | |
| 07 | Ajiye | 0 | |
| 2-3 | CH0 ƙimar biya | 0 | |
| 4-5 | CH1 ƙimar biya | 0 | |
| 6-7 | CH2 ƙimar biya | 0 | |
| 8-9 | CH3 ƙimar biya | 0 |
- Ba za a iya nuna bayanan da suka wuce 32767 ba.
- Idan an saita tace mai sauri, ƙila ba za a iya saduwa da ƙayyadaddun ƙayyadaddun bayanai ba.
Darajar Data
Matsakaicin shigarwar mai gano zafin jiki na juriya
| Nau'in | Kewayon shigarwa |
| PT100 | -200-850 ℃ |
| PT200 | -200-850 ℃ |
| PT500 | -200-850 ℃ |
| PT1000 | -200-850 ℃ |
| PT50 | -200-850 ℃ |
| Saukewa: JPT100 | -200 - 640 ℃ |
| Saukewa: JPT200 | -200 - 640 ℃ |
| Saukewa: JPT500 | -200 - 640 ℃ |
| Saukewa: JPT1000 | -200 - 640 ℃ |
| Saukewa: JPT50 | -200 - 640 ℃ |
| Saukewa: NI100 | -60-250 ℃ |
| Saukewa: NI200 | -60-250 ℃ |
| Saukewa: NI500 | -60-250 ℃ |
| Saukewa: NI1000 | -60-250 ℃ |
| Saukewa: NI120 | -80-260 ℃ |
| Ku10 | -100-260 ℃ |
| Ku100 | -100-260 ℃ |
| NI1000LG | -50-120 ℃ |
Kewayon shigar da juriya
| Nau'in | Kewayon shigarwa |
| 1 Ω/bit | 0 - 4000 Ω |
| 100mΩ/bit | 0 - 2000 Ω |
| 10mΩ/bit | 0 - 327 Ω |
| 20mΩ/bit | 0 - 620 Ω |
| 50mΩ/bit | 0 - 1200 Ω |
Saitin Hardware
- HANKALI Koyaushe karanta wannan babin kafin shigar da tsarin!
- Zafi mai zafi! Fuskar gidan na iya zama zafi yayin aiki. Idan ana amfani da na'urar a cikin yanayin yanayin zafi, koyaushe bari na'urar ta yi sanyi kafin ta taɓa ta.
- Yin aiki akan na'urori masu ƙarfi na iya lalata kayan aiki! Koyaushe kashe wutar lantarki kafin aiki akan na'urar.
Bukatun sararin samaniya
- Zane-zane masu zuwa suna nuna buƙatun sarari lokacin shigar da samfuran G-jerin.
- Tazarar tana haifar da sarari don samun iska kuma yana hana tsangwama na lantarki da aka gudanar daga yin tasiri.
- Matsayin shigarwa yana aiki a tsaye da a kwance. Hotunan misalai ne kuma maiyuwa ba su kai daidai ba.
- HANKALI: RASHIN bin buƙatun sarari na iya haifar da ɓata samfurin.
Dutsen Module zuwa DIN Rail
- Babi masu zuwa suna bayyana yadda ake hawan tsarin zuwa dogo na DIN.
- HANKALI Dole ne a daidaita tsarin zuwa layin dogo na DIN tare da maƙallan kullewa.
Dutsen GL-9XXX ko GT-XXXX Module
- Umurnai masu zuwa sun shafi waɗannan nau'ikan samfuri.
- GL-9XXX
- GT-1XXX
- GT-2XXX
- GT-3XXX
- GT-4XXX
- GT-5XXX
- GT-7XXX
- GN-9XXX kayayyaki suna da levers na kulle guda uku: ɗaya a ƙasa da biyu a gefe. Don umarnin hawa, koma zuwa Module Dutsen GN-9XXX.
- Dutsen zuwa DIN dogo
- Sauke daga DIN dogo
Module Dutsen GN-9XXX
- Don hawa ko saukar da adaftar cibiyar sadarwa ko tsarin IO mai tsari tare da sunan samfurin GN-9XXX, don ex.ample GN-9251 ko GN-9371, duba umarni masu zuwa.
- Dutsen zuwa DIN dogo
- Sauke daga DIN dogo
Tushen Tasha Mai Cirewa
- Don hawa ko saukar da toshe mai cirewa (RTB), duba umarnin da ke ƙasa.
- Dutsen toshe mai cirewa
- Rage shingen tasha mai cirewa
Haɗa igiyoyi zuwa Toshe Tasha Mai Cirewa
- Don haɗa/cire haɗin igiyoyi zuwa/daga cikin toshe mai cirewa (RTB), duba umarnin da ke ƙasa.
- GARGADI: Koyaushe amfani da shawarar samarwa voltage da mita don hana lalacewar kayan aiki da kuma tabbatar da kyakkyawan aiki.
- Haɗa kebul
- Cire haɗin kebul
Wurin Wuta da Fil ɗin Bayanai
- Ana gudanar da sadarwa tsakanin adaftar cibiyar sadarwa ta G-jerin da tsarin fadada, da kuma tsarin / filin samar da wutar lantarki na motocin bas, ta hanyar bas na ciki. Ya ƙunshi Filayen Wutar Wuta 2 da Fin Data 6.
- GARGADI: Kar a taɓa bayanan da filayen ikon filin! Taɓawa na iya haifar da lalacewa da lalacewa ta hanyar hayaniyar ESD.
| Fil babu. | Suna | Bayani |
| P1 | Tsarin VCC | Samar da tsarin voltage (5VDC) |
| P2 | Tsarin GND | Tsarin ƙasa |
| P3 | Fitowar alama | Token fitarwa tashar jiragen ruwa na processor module |
| P4 | Serial fitarwa | Mai watsa fitarwa tashar jiragen ruwa na processor module |
| P5 | Shigar da serial | Mai shigar da tashar tashar mai karɓar mai sarrafawa |
| P6 | Ajiye | An tanada don alamar wucewa |
| P7 | Filin GND | Filin filin |
| P8 | Filin VCC | Samar da filin voltage (24VDC) |
Haƙƙin mallaka
- © 2025 Beijer Electronics AB. An kiyaye duk haƙƙoƙi.
- Bayanin da ke cikin wannan takarda yana iya canzawa ba tare da sanarwa ba kuma ana bayar da shi kamar yadda yake a lokacin bugawa. Beijer Electronics AB yana da haƙƙin canza kowane bayani ba tare da sabunta wannan ɗaba'ar ba.
- Beijer Electronics AB ba ta da alhakin kowane kurakurai da ka iya bayyana a cikin wannan takarda. Duk examples a cikin wannan takarda an yi niyya ne kawai don inganta fahimtar ayyuka da sarrafa kayan aiki.
- Beijer Electronics AB ba zai iya ɗaukar kowane alhaki ba idan waɗannan tsoffinampAna amfani da les a ainihin aikace-aikace.
- Ganin yawan aikace-aikacen wannan software, masu amfani dole ne su sami isasshen ilimi da kansu don tabbatar da cewa an yi amfani da shi daidai a takamaiman aikace-aikacen su.
- Mutanen da ke da alhakin aikace-aikacen da kayan aiki dole ne su tabbatar da cewa kowane aikace-aikacen ya bi duk buƙatun da suka dace, ma'auni, da dokoki dangane da tsari da aminci.
- Beijer Electronics AB ba za ta karɓi wani alhaki ga duk wani lahani da ya faru yayin shigarwa ko amfani da kayan aikin da aka ambata a cikin wannan takarda. Beijer Electronics AB ya haramta duk gyare-gyare, canje-canje, ko canza kayan aiki.
- Babban ofishi
- Beijer Electronics AB girma
- Akwatin 426
- 201 24 Malmö, Sweden
- www.beijerelectronics.com
- + 46 40 358600
FAQ
- Tambaya: Menene alamun LED akan ƙirar ke nunawa?
- A: Manufofin LED suna nuna matsayin siginar shigarwar module.
- Koma zuwa littafin mai amfani don cikakkun bayanai kan fassarar siginar LED.
- Q: Zan iya amfani da GT-3744 Analog Input Module tare da wasu tsarin?
- A: GT-3744 Analog Input Module an ƙera shi musamman don amfani da tsarin G-jerin.
- Daidaitawa tare da wasu tsarin na iya bambanta, don haka ana bada shawara don tuntuɓar goyon bayan fasaha kafin haɗa shi da wani tsarin daban.
Takardu / Albarkatu
 |
Beijer ELECTRONICS GT-3744 Analog Input Module [pdf] Manual mai amfani GT-3744 Analog Input Module, GT-3744, Analog Input Module |