ANALOG DEVICES MAX16132 Multi-Voltage Baokameli ba nang le Xilinx FPGAs
Litlhaloso tsa Sehlahisoa
Lebitso la Sehlahiswa
Tataiso ea likarolo tse tlatselletsang tsa lisebelisoa tsa Supervisory bakeng sa Xilinx FPGAs
Tlhaloso
Tataiso ena e fana ka tlhahisoleseding ka multi-voltagbatsamaisi ba tsamaisanang le Xilinx FPGAs ho netefatsa botsitso ba sistimi.
Xilinx FPGA Lelapa Moqtage Lintlha
| Lelapa la FPGA | Moqtage (V) | Moqtage (V) | I/O Moqtage (V) |
|---|---|---|---|
| Virtex UltraScale + | 0.85, 0.72, 0.90 | 1.8 | 1.0, 1.2, 1.35, 1.5, 1.8, 2.5, 3.3 |
| Virtex UltraScale | 0.95, 1 | 1.8 | 1.0, 1.2, 1.35, 1.5, 1.8, 2.5, 3.3 |
Litaelo tsa Tšebeliso ea Sehlahisoa
Mohato oa 1: Khetholla Lelapa la FPGA Moqtage Hlokahalang
Sheba lethathamo le ka holimo ho fumana hore na molumo oa mantlha ke ofetage, tlatsetso voltage, le I/O voltaglitlhoko tsa lelapa la hau le khethehileng la Xilinx FPGA.
Mohato oa 2: Khetha Multi-vol e nepahetsengtage Mohlokomeli
E ipapisitse le voltagLitlhoko tsa Xilinx FPGA ea hau, khetha ADI Multi-vol e lumellanangtagMookameli oa karolo ea nomoro ea MAX16132.
Mohato oa 3: Tlhophiso le Tlhophiso
Latela litaelo tsa ho kenya tse fanoeng le mookameli oa MAX16132 ho beha leihlo le ho boloka molumo o hlokahalangtagke bakeng sa Xilinx FPGA ea hau.
Tataiso ea likarolo tse tlatselletsang tsa lisebelisoa tsa Supervisory bakeng sa Xilinx FPGAs
FPGA ea sejoale-joale e rala mekhoa e tsoetseng pele ea ho etsa masela, e nolofalletsang li-geometri tse nyane le matla a tlase a mantlha.tages. Mokhoa ona, leha ho le joalo, o hloka hore ho sebelisoe multiple voltage rails ho amohela litekanyetso tsa I/O tsa lefa. Ho netefatsa botsitso ba sistimi le ho thibela boitšoaro bo sa lebelloang, e 'ngoe le e' ngoe ea tsena voltage rails hloka tlhokomelo e inehetseng. Lisebelisoa tsa Analog li fana ka potefolio e felletseng ea voltage beha leihlo litharollo, tse kenyelletsang mefuta e mengata e fapaneng, e; ho tloha setsing se le seng sa mantlha ho isa ho li-volver tse ngatatagbatsamaisi ba ithorisa ka ho nepahala ho etellang pele indastering (ho fihla ho ± 0.3% ho pholletsa le mocheso). The core, I/O, le axiliary voltagLitlhoko tsa malapa a fapaneng a Xilinx® FPGA li hlahisoa ka tafole e hlakileng le e bonolo ho e supa. Karolo ea mantlhatage hangata e tloha ho 0.72 V ho isa ho 1 V, ha I/O voltagmaemo a e ka fapana pakeng tsa 1 V le 3.3 V.
MAX16161:
NanoPower Supply Supervisor ka Glitch-Free Power-Up le Manual Reset
MAX16193:
± 0.3% Ho Nepaha ha Fensetere e Kopanetsoeng-Mohloli oa Setsi sa Potoloho
LTC2963:
± 0.5% Quad Configurable Supervisor ea nang le Watchdog Timer
MAX16135:
± 1% Motlakase o Tlasetage, Quad-Voltage Fesetere Supervisor
Multi-voltage Baokameli ba nang le Xilinx FPGAs
Li-FPGA tsa Xilinx
|
Xilinx FPGA Lelapa |
Ea mantlha Moqtage (V) | Motlatsi Moqtage (V) |
I/O Moqtage (V) |
| Virtex UltraScale + | 0.85,
0.72, 0.90 |
1.8 | 1.0, 1.2, 1.35, 1.5, 1.8, 2.5, 3.3 |
| Virtex UltraScale | 0.95, 1 | 1.8 | 1.0, 1.2, 1.35, 1.5, 1.8, 2.5, 3.3 |
| Virtex 7 | 1, 0.90 | 1.8, 2.0 | 1.2, 1.35, 1.5, 1.8, 2.5, 3.3 |
| Kintex UltraScale + | 0.85,
0.72, 0.90 |
1.8 | 1.0, 1.2, 1.35, 1.5, 1.8, 2.5, 3.3 |
| Kintex UltraScale | 0.95,
0.90, 1.0 |
1.8 | 1.0, 1.2, 1.35, 1.5, 1.8, 2.5, 3.3 |
| Kintex 7 | 1, 0.90,
0.95 |
1.8 | 1.2, 1.35, 1.5, 1.8, 2.5, 3.3 |
| Artix UtraScale+ | 0.85, 0.72 | 1.8 | 1.0, 1.2, 1.35, 1.5, 1.8, 2.5, 3.3 |
| Article 7 | 1.0, 0.95,
0.90 |
1.8 | 1.2, 1.35, 1.5, 1.8, 2.5, 3.3 |
| Spartan Ultrascale + | 0.85,
0.72, 0.90 |
1.8 | 1.0, 1.2, 1.35, 1.5, 1.8, 2.5, 3.3 |
| 7 ea Spartan | 1, 0.95 | 1.8 | 1.2, 1.35, 1.5, 1.8, 2.5, 3.3 |
ADI Multi-voltage Baokameli
| Nomoro of Moqtage Behiloe leihlo |
Karolo Nomoro |
Moqtages Tlhokomeloa (V) |
Ho nepahala (%) |
| 1 | MAX16132 | 1.0 ho ea ho 5.0 | <1 |
| 1 | MAX16161,
MAX16162 |
1.7 ho 4.85, 0.6 ho 4.85 | <1.5 |
| 2 | MAX16193 | 0.6 ho 0.9, 0.9 ho 3.3 | <0.3 |
| 3 | MAX16134 | 5.0, 4.8, 4.5, 3.3, 3.0,
2.5, 1.8, 1.2, 1.16, 1.0 |
<1 |
|
4 |
LTC2962, LTC2963, LTC2964 | 5.0, 3.3, 2.5, 1.8, 1.5,
1.2, 1.0, 0.5V |
<0.5 |
|
4 |
MAX16135 |
5.0, 4.8, 4.5, 3.3, 3.0,
2.5, 2.3, 1.8, 1.5, 1.36, 1.22, 1.2, 1.16, 1.0 |
<1 |
| 4 | MAX16060 | 3.3, 2.5, 1.8, 0.62 (adj) | <1 |
| 6 | LTC2936 | 0.2 ho isa ho 5.8 (E ka khoneha) | <1 |
Fesetere Moqtage Baokameli
Fesetere voltagbatsamaisi ba sebelisoa ho netefatsa hore li-FPGA li sebetsa ka har'a molumo o bolokehilengtage specific range. Ba etsa sena ka ho se be le khatello ea maikutlotage (UV) le ho fetatage (OV) menyako le ho hlahisa lets'oao la reset ha e feta fensetere ea mamello ho qoba liphoso tsa sistimi le ho thibela tšenyo ho li-FPGA tsa hau le lisebelisoa tse ling tsa ts'ebetso. Ho na le lintho tse peli tse ka sehloohong tse lokelang ho nahanoa ha u khetha fensetere ea voltage mookamedi: Tolerance le Threshold Accuracy.
Tolerance ke mofuta o potolohileng boleng bo behiloeng leihlo bo behang overvoltage le undervoltage menyako. Leha ho le joalo, ho nepahala ha Threshold, hangata ho hlahisoa ka liperesentetage, ke tekanyo ea ho lumellana ha 'nete ho litekanyetso tsa ho seta bocha.
- Ho itšireletsatage le overvolvetage threshold variation with Threshold Accuracy
Ho Khetha Fensetere ea Mamello e nepahetseng
Ho khetha mookameli oa fensetere ka mamello e tšoanang le ea mantlha ea voltagtlhokahalo e ka lebisa ho se sebetse hantle ka lebaka la ho nepahala ha menyako. Ho beha mamello e ts'oanang le tlhoko ea ts'ebetso ea FPGA ho ka tsosa tlhahiso ea reset haufi le ho fetella ho hoholo.tage threshold, OV_TH (max), le bonyane undervolvoltage threshold,d UV_TH (min). Setšoantšo se ka tlase se bonts'a maemo a mamello (a) a ts'oanang le core voltage mamello khahlano le (b) ka har'a karolo ea mantlhatage mamello.
Tšusumetso ea ho Nepahalla ha Threshold
Bapisa lifensetere tse peli voltage balebeli ba nang le threshold ho nepahala, ho beha leihlo e tšoanang core voltage phepelo ea terene. Mookameli ea nang le threshold e phahameng ea ho nepahala o tla kheloha ka tlase ho meeli ea moeli ha a bapisoa le vol.tage batsamaisi ka nepo e tlase. Ha u hlahloba setšoantšo se ka tlase, baokameli ba lifensetere ka nepo e tlase (a) ba theha fensetere e patisaneng ea phepelo ea motlakase kaha lets'oao la ho seta bocha le ka tiisa kae kapa kae ka har'a sebaka sa tlhahlobo sa UV le OV. Lits'ebetsong tse nang le taolo e sa tšepahaleng ea phepelo ea motlakase, sena se ka baka sistimi e hlokolosi haholoanyane e sekametseng ho oscillation. Ka lehlakoreng le leng, baokameli ba nang le ts'ebetso e phahameng ea ho nepahala (ho eketsa sebaka sena ho fana ka sebaka se pharaletseng sa ts'ebetso e sireletsehileng bakeng sa matla a hau, a tla sebetsa ka kakaretso.
Tatelano ea Phepelo ea Matla
Li-FPGA tsa sejoale-joale li sebelisa matla a mangatatage rails bakeng sa tshebetso e ntlafetseng. Litlhoko tse hlalositsoeng tsa ho phahamisa matla le ho theola matla li bohlokoa bakeng sa ts'epahalo ea FPGA. Tatelano e fosahetseng e hlahisa glitches, liphoso tsa logic, esita le tšenyo e sa feleng ea likarolo tse hlokolosi tsa FPGA. Lisebelisoa tsa Analog li fana ka letoto le felletseng la lipotoloho tsa taolo / tatellano e etselitsoeng ho rarolla mathata a taolo ea matla a FPGA. Lisebelisoa tsena li hlophisa tatellano ea ho phahamisa matla le ho theola matla a mefuta e fapanengtage rails, e tiisang hore seporo se seng le se seng se fihla bophahamong ba sona bo khethiloengtage ka hare ho r e hlokahalangamp nako le taolo. Tharollo ena ea taolo ea matla e fokotsa ho kenella ha motlakase, ho thibela voltage undershoot/overshoot, mme qetellong e sireletsa botshepehi ba moralo oa hau oa FPGA.
ADI Supervisory and Sequencing Solutions
| Nomoro of Supplies shebiloeng | Karolo
Nomoro |
Ho sebetsa
Vrange |
Moeko
Ho nepahala |
Tatelano |
Lenaneo
Mokhoa |
Sephutheloana |
| 1: Cascadable | MAX16895 | 1.5 ho 5.5V | 1% | Up | R's, C | 6 uDFN |
| 1: Cascadable | MAX16052, MAX16053 | 2.25 ho 28V | 1.8% | Up | R's, C | 6 SOT23 |
| 2: Cascadable | MAX6819, MAX6820 | 0.9 ho 5.5V | 2.6% | Up | R's, C | 6 SOT23 |
| 2 | MAX16041 |
2.2 ho 28V |
2.7% le 1.5% |
Up |
R's, C |
16 TQFN |
| 3 | MAX16042 | 20 TQFN | ||||
| 4 | MAX16043 | 24 TQFN | ||||
|
4: Cascadable |
MAX16165, MAX16166 | 2.7 ho 16V | 0.80% | Holimo, Reverse- Matla Down | R's, C | 20 WLP,
20L TQFN |
| MAX16050 |
2.7 ho 16V |
1.5% |
Holimo, Reverse- Matla Down |
R's, C |
28 TQFN |
|
| 5: Cascadable | MAX16051 | |||||
| 6: Cascadable | LTC2937 | 4.5 ho 16.5V | <1.5% | E ka reroang | I2C, SMBus | 28 QFN |
| 8 | ADM1168 | 3 ho 16V | <1% | E ka reroang | SMBus | 32 LQFP |
| 8 | ADM1169 | 3 ho 16V | <1% | E ka reroang | SMBus | 32 LQFP,
40 LFCSP |
| 10: Cascadable
(boholo ba 4) |
ADM1260 | 3 ho 16V | <1% | E ka reroang | SMBus | 40 LFCSP |
| 12: Cascadable | ADM1166 | 3 ho 16V | <1% | E ka reroang | SMBus | 40 LFCSP,
48 TQFP |
| 17: Cascadable | ADM1266 | 3 ho 15V | <1% | E ka reroang | PMBus | 64 LFCSP |
MAX16165/MAX16166:
E kopantsoe Haholo, Sequencer ea 4-Channel le Mookameli
Tatellano ea Phepelo ea Matla e hlokang 8 Power Regulator e sebelisang MAX16165
FAQs
P: Na nka sebelisa multi-vol e fapanengtagke mookameli ea nang le Xilinx FPGAs?
A: Ho khothalletsoa ho sebelisa ADI Multi-vol e boletsoengtage Supervisor MAX16132 bakeng sa tumellano le molumo o nepahetsengtage monitoring.
Litokomane / Lisebelisoa
 |
ANALOG DEVICES MAX16132 Multi Voltage Baokameli ba nang le Xilinx FPGAs [pdf] Buka ea Mong'a MAX16132, MAX16132 Multi Voltage Baokameli ba nang le Xilinx FPGAs, Multi VoltagBaokameli ba nang le Xilinx FPGAs, Baokameli ba nang le Xilinx FPGAs, Xilinx FPGAs |