MICROSENS Smart IO Controller Inobatanidza Dhijitari Chikamu muIP Network

Kugadziriswa Kwemagetsi

Iyo MICROSENS Smart I / O Controller yakagadzirira kusungirirwa kuburikidza nema mountings maviri akasiyana:

•  Clamp yekukwira kumusoro-hat njanji,
•  uye mana ekumisikidza ma tabo ekunamira pamadziro, sirin'i kana chero imwe yekutsigira midziyo.

Pamusoro Hat Rail Mounting uye Demounting

Padivi rayo rezasi, iyo Smart I / O Controller dzimba (Mufananidzo 1, Pos. 1) ine cl.amp yekuisa mudziyo pane yakajairika top-hat njanji (Mufananidzo 1, Pos. 2).
Note: Unganidza clamp kune imba kana isina kutumirwa neclamp yakatogadziridzwa. Iva nechokwadi chekuti clamp's release lever (Figure 1, Pos. 3) iri kunongedzera kudivi neEthernet port.

Kukwira pamusoro peTop Hat Rail

1.  Isa imba ine clamp's stationary fixture pamusoro pepamusoro hat njanji (Mufananidzo 1, Pos. 4).
2.  Zvinyoronyoro dzvanya imba (Mufananidzo 1, Pos. 5) kusvikira clamp inosvetukira muhat rail nekudzvanya kunonzwika.

Kubvisa kubva kuTop Hat Rail

1.  Dhonza kusunungura lever (Mufananidzo 2, Pos. 1) kuti uzarure clamp uye simudza chigadziro (Mufananidzo 2, Pos. 2) kuti uibvise kubva kumusoro-hat rail.

Kuisa Tabs

Kuti ubatanidze Smart I / O Controller zvakananga kumadziro, sirin'i, kana chero imwe yakakodzera kutsigira midziyo, shandisa mabhuraketi mana ekukwira (Mufananidzo 3, Pos. 1 kusvika 4).

Cherechedza: Ita shuwa kuchengetedza chinonamatirwa zvakaringana paunenge uchishandisa mashoma ekumisikidza tabo! Izvo hazvikurudzirwe kushandisa imwe chete yekumisikidza tabhu kana kukwirisa ma tabo edivi rimwe chete.

Kubatanidza Power Supply

Iyo MICROSENS Smart I/O Controller inogona kupihwa neaviri mamwe magetsi ekuisa (kamwe kana akabatana):

1. PoE + (PD) kuburikidza neEthernet port (Mufananidzo 4, Pos. 1).
2.  Ekunze 24 VDC kuburikidza nepush clamp zviteshi X21 uye X22 (Mufananidzo 4, Pos. 2)

Madiro Ekupa Simba

Magetsi	Voltage	Kushandiswa	Plug
PoE/PoE+ PD	44 - 54 VDC (54 VDC mhando.)	3.2 W	Ethernet uplink port (Mufananidzo 4, Pos. 1)
External	24 VDC	1.2 W	Sunda clamp ports X21 uye X22 ye-two-waya tambo (Mufananidzo 4, Pos. 2) Cherechedza: Ita shuwa yekubatanidza tambo neiyo polarity chaiyo!

Cherechedza: Ita shuwa yekugonesa PoE/PoE+ PD pane yekugezera mudziyo. Nekugonesa PoE paMICROSENS zvishandiso ndapota tarisa kune iwo magwaro akatumirwa nemudziyo.
Pakarepo magetsi ekunze akabatanidzwa kune clamp zviteshi X21 uye X22 iyo inoteedzana "Pwr In" chiteshi chemwenje LED inovhenekera ichiratidza kugovera vol.tage aripo.
Pangosvika imwe yePoE kana yekunze magetsi inovharwa uye iripo, iyo port mamiriro e LED e "Pwr Out" ports 1 uye 2 inovhenekera kumusoro (Mufananidzo 4, Pos. 3).

Kugadzika nePoE Supply 

Pakumisikidzwa kwezvikamu zvePoE mumambure network zvinofanirwa kunongedzera iyo DC supply voltage yezvishandiso zvese kusvika padanho rakafanana repasi. Kazhinji iyi ndiyo inenge iri polarity yakanaka yakabatana nepasi pegadziriro yemagetsi echivako (kureva “pasi”).
Tichifunga, simba reSmart I / O Controller rinoitwa kuburikidza nechepakati-kure-kure-kure PoE PSE mudziyo zvakakosha kuti ubatanidze inogadzika kutungamira kwechasisi chemutongi (Mufananidzo 4, Pos. 4 kune mukana wepasi pechivako uye nekudaro kudzivirira “ matambudziko ekuyangarara pasi.” Kunze kwenyaya dzekuchengetedza, nzvimbo inoyangarara yetiweki inogona kukonzera matambudziko kana chikamu chimwe chete netsaona kana nemaune chikaiswa pasi (Mufananidzo 5).

Grounding neExternal Power Supply

Kusiyana nekushandiswa kwakajairwa kweiyo negative polarity yakabatana nedanho repasi paunenge uchishandisa simba rekunze ita chokwadi chekubatanidza iyo yakanaka polarity yemagetsi kusvika pasi.

Dzokorora iyo Smart I/O Controller

Iyo Smart I/O Controller ine bhatani reset padyo neEthernet port (ona Mufananidzo 6).
Kudzvanya bhatani reset nechinhu chakanongedza kwesekondi 1 kuchagadzirisa mutongi. Munguva yekuseta patsva, ese maLED "Digital Out" (zviratidziro zvezviteshi X5 kusvika X8) anovhenekera approx. 1 second.
Cherechedza: Kudzvanya bhatani reset kweanopfuura 1 sekondi mushure mekutangazve kunogonesa iyo modhi "Load Bootloader". Izvi ndezve MICROSENS sevhisi zvinangwa chete!

Kubatanidza maInput/Output Cables uye Kuisa DIP Swichi

Iyo Smart I/O Controller ine maviri 20-pini push clamp zviteshi zvekupinza uye kubuda masaini pamwe nekuisa uye kubuda voltage (waya dhayamita 0.1 kusvika 1.5 mm², yakasungwa/yakasimba). Pamusoro pezvo, 2-nzira uye 4-nzira DIP switch inogonesa yakatarwa marongero eanalog yekupinza uye sensor yekupinza masaini.

The kusunda clamp pini (X1 kusvika X40) uye Ethernet uplink port ine anotevera mabasa:

Port	Signal	Meaning
X1, X2	Power Out 1	Simba rinobuda: 2x 24 VDC, yakasanganiswa yakakura mutoro 20 mW
X3, X4	Power Out 2
X5, X6	Digital Out 1	Dhijitari kuburitsa: 2x 24 VDC, muunganidzi akavhurika, PWM (max. 100 Hz) yakasanganiswa yakakura ikozvino 1 A
X7, X8	Digital Out 2
X9, X10	Digital Mu1	Kuisa padhijitari: 4x mukuru. 24 VDC (chikumbaridzo: yakaderera <1.0 - 1.3 > yakakwirira) opto-isolated Iwo ma port assignments ndeaya anotevera: · X9, X11, X13, X15: Port voltage pakati pe0 VDC ne24 VDC X10, X12, X14, X16: Zviteshi zvakabatana ne24 VDC (“+”)
X11, X12	Digital Mu2
X13, X14	Digital Mu3
X15, X16	Digital Mu4

 

Port	Signal	Meaning
X17, X18	PT100/1000 1	Tembiricha sensor yekupinda: 2x 2-waya yekupinda yePt100 kana Pt1000 inodzivirira kupisa tembiricha (RTDs). Cherechedza: Kusarudzwa kwerudzi rwe sensor kune yakatarisana tembiricha yekuisa chiteshi inogona kutariswa kuburikidza ne2-port DIP switch: ON 1/2: Pt100 yakasarudzwa · KUBVA 1/2: Pt1000 yakasarudzwa
X19, X20	PT100/1000 2
X21, X22	Power In	Kupinza simba rekunze: 1x 24 VDC yakanyanya kushandiswa mukati 1.2 W
X23, X24, X25	Analog Out 1	Analog output: 2x 0..10 V yakasanganiswa yakakura ikozvino 1 A Iwo ma port assignments ndeaya anotevera: X23, X26: Zviteshi zvakabatana ne24 VDC (“+”) X24, X27: Port voltage inoshandiswa pakati pe0 V ≤ UAO ≤ 10 V X25, X28: Zviteshi zvakabatana neGND (“-”)
X26, X27, X28	Analog Out 2
X29, X30, X31	Analogi mu1	Analogue input: 4x 0..10 V (voltage modhi) / 0..20 mA (ikozvino maitiro) Mabasa echiteshi ndeaya anotevera: X29, X32, X35, X38: Zviteshi zvakabatana ne24 VDC (“+”) · X30, X33, X36, X39: Port voltage pakati pe0 V ≤ UAI ≤ 10 V Port current pakati pe0 mA ≤ IAI ≤ 20 mA X31, X34, X37, X40: Zviteshi zvakabatana neGND (“-”)   Cherechedza: Mode kusarudzwa kweiyo chiteshi chinogona kutariswa kuburikidza ne4-port DIP switch: ON 1/2/3/4: Current mode (0..20 mA) · KUBVA 1/2/3/4: Voltage modhi (0..10 V)
X32, X33, X34	Analogi mu2
X35, X36, X37	Analogi mu3
X38, X39, X40	Analogi mu4
Ethernet		Ethernet uplink port: 1x 10/100Base-T, RJ-45, PoE (PD)

Kunzwisisa iyo Status LEDs

Iyo MICROSENS Smart I/O Controller yakashongedzerwa nemapfumbamwe ma LEDs anoratidza zvinotevera chiratidzo chinoti:

Port	Signal	Meaning
X1, X2	Power Out 1	Simba rinobuda: · Green: Magetsi anoshanda · Off Hapana magetsi
X3, X4	Power Out 2
X5, X6	Digital Out 1	Dhijitari kuburitsa: · Green: Kubuda kunoshanda (akavhurika muunganidzi anokwevera pasi) · Off: Kubuda kusashanda   · Ratidza reset kana ese maLED akavheneka girinhi kweanenge. 1 second.
X7, X8	Digital Out 2
X9, X10	Digital Mu1	Kuisa padhijitari: · Green: Input contact yakavharwa · Off Input vhura
X11, X12	Digital Mu2
X13, X14	Digital Mu3
X15, X16	Digital Mu4
X21, X22	Power In	Kupinza simba rekunze: · Green: Chishandiso chinofambiswa nemagetsi ekunze · Kudzima Chishandiso chisina simba kana simba nePoE.

Kushandisa Smart I/O Controller ine MICROSENS Swichi

Kushandisa MICROSENS Smart I/O Controller inogoneka neMICROSENS switch ine firmware 10.7.4a uye nyowani.
Sezvo firmware 5. x mutongi anotsigira MQTT iyo inobvumira kushanda mumapurogiramu pasina MICROSENS switches. Muchiitiko ichi, hapana chikonzero chekubatanidza. Iyo gadziriso inogona kuitwa kuburikidza neMICROSENS SmartConfig Tool. Pakarepo iyo Smart I / O Controller yakabatana kune magetsi (PoE kana yekunze yekupihwa) uye kune yekambani network mutongi anowanikwa kuburikidza neMICROSENS switch ine MICROSENS SmartDirector.
Cherechedza: Nekuda kwekushandisa IPv6 link-local addresses zvinokwanisika kushandisa remote Smart I/O Controller ine MICROSENS chinja kuburikidza neIPv6 corporate network chero bedzi kubatana kusingafambiswi.6.1 Kubatanidza Smart I/O Controller uye MICROSENS Switch Aya matanho anotevera anotsanangura maitiro ekubatanidza Smart I / O Controller kuburikidza ne Web Maneja weMICORSENS switch.
Cherechedza: Kuti izvi zvipereview kunyanya kushandiswa kwe Web Maneja anoratidzwa. Kushandisa iyo CLI yekubatanidza michina iri nyore nekuti iyo Web Maneja anoshandisa anoenderana CLI mirairo semavara eminda uye zvikamu.
Kushandisa the Web Mutungamiriri:

• Tanga iyo web browser uye isa IP kero yeiyo G6 mudziyo.
•  Log into the Web Maneja ane zvitupa zvemutungamiri.
• Sarudza iyo SmartOffice skrini, wobva wasarudza iyo tab Basic Configuration.
•  Muchikamu Device.smart office.director_config tinya pane bhatani scanner light controllers.
•  Iyo SmartDirector inotanga kutsvaga Smart Controllers. Chero bedzi pasina controller inowanikwa chikamu chakaongororwa Light Controllers chinoramba chisina chinhu.
•  Mushure mekubudirira kutarisisa kune iripo Smart Controllers iyo Web Maneja anonyora ese anowanikwa controller.

Kana usina kutsanangura yakasarudzika "zita remudziyo" muchikamu Chidimbu. smart office.device_config pane tab Device kumisikidza kare, nhaurirano haizoratidze bhatani rekumanikidza peya se uye inoteedzana yekudonhedza pasi runyorwa mumutsara wetafura yemutongi. Muchiitiko ichi, pfuurira nedanho rinotevera. Zvikasadaro, sarudza zita remuchina kubva pane iyo rondedzero uye tinya pane bhatani simba repairi se.

Cherechedza: Inokurudzirwa kugovera ese anodiwa parameter maitiro emutongi muchikamu Device.smart office.device_config pane tab Device configuration nekuti ruzivo urwu runoshandiswa panguva yekubatanidza. Kana iyo gadziriso ikaitika mushure mekuita pairing marongero mazhinji emukati anofanirwa kugadziridzwa nemaoko.

• Sarudza tab Device Configuration.
• Zita remudziyo rine prefix "scanned_" uye controller ID. Chinja zita iri sezvinodiwa.
•  Rudzi rwechigadzirwa "SMART_IO_CONTROLLER".
•  Iyo ID yemudziyo nekusarudzika ine kero yeMAC yemudziyo.
•  Muchikamu Pairing Zviito zveiyo inoteedzana Smart I / O Controller mutsara sarudza iyo yakambogadzirwa mudziyo kubva pane yekudonha-pasi runyorwa uye tinya pane bhatani manikidza peya se.
•  Iyo Smart I/O Controller ikozvino yapetwa zvakanaka kune SmartDirector yeMICROSENS G6 Switch.

Inoshanda Muedzo wePaired Smart I/O Controller

Aya matanho anotevera anotsanangura maitiro ekuyedza iyo chaiyo pairing yeSmart I/O Controller kuburikidza ne Web Maneja wepairi MICORSENS switch.
Cherechedza: Kuti izvi zvipereview kunyanya kushandiswa kwe Web Maneja anoratidzwa. Kushandisa iyo CLI yekubatanidza michina iri nyore nekuti iyo Web Maneja anoshandisa anoenderana CLI mirairo semavara eminda uye zvikamu.
Kushandisa the Web Mutungamiriri:

•  Sarudza iyo Controller skrini, wobva wasarudza iyo tab SIO.
•  Muchikamu Device.controller.smart_io_config zvose zviripo zviteshi zvepairi Smart I/O Controller yakanyorwa.
•  Tsvaga the parameter dout1 mode for the port “Digital Out 1” and select a value from the drop-down list that matches your application.
•  Click on the button apply to running configuration to save the changes to the running configuration. Tsvaga the parameter manual set output, enter the value “dout1 1” and click on the button manual set output.
•  Iyo chiteshi chechiteshi che LED che "Dhijitari Kunze 1" inofanirwa kuvhenekera kuratidza iyo yedhijitari inobuda yakaiswa kune yedhijitari yepamusoro.
•  Kune iyo parameter manual set inobuda, isa iyo kukosha "dout1 0" uye tinya pane bhatani bhuku remanyorero seti inobuda.
•  Iyo chiteshi chechiteshi che LED che "Dhijitari Kunze 1" inofanirwa kudzima zvichiratidza kuburitsa kwedhijitari kwakaiswa kune yakaderera yedhijitari.

Cherechedza: Kana iyi bvunzo yekubatanidza ikatadza edza kubatanidza iyo Smart I/O Controller zvakare kubva pakutanga.

Kushandisa Analogue Input uye Output Ports
Yese analog yekupinza uye yekubuda port (X23 kusvika X40) ine zvikamu zvitatu chimwe nechimwe:

•  "+": Chiteshi ichi chakabatana ne24 VDC.
•  "-": Chiteshi ichi chakabatana ne0 V (GND).
•  "AO"/"AI": Iro voltagkukosha kweiyo 0 V (GND).

Iko kupinza uye kuburitsa kukosha kunoreva kukosha kwereferensi 0 V (positive polarity)
Example yekushandisa micro script ine Smart I/O Controller Ports
Cherechedza: Kuti uwane rumwe ruzivo nezve mashandisiro e micro script ndapota tarisa kune chigadzirwa bhuku "micro script Programmers Guide" rakapihwa neMICROSENS G6 Switch uye rinowanikwa kuburikidza Web Maneja pasi pechinhu chemenyu
"Documentation".Inotevera example inoratidza iyo macro script kodhi yekuverenga kukosha kwetembiricha (zviteshi 17/18) uye kuseta yedhijitari inobuda (zviteshi 5/6) kubva 0 kusvika 1 kana ichisvika tembiricha ye24.5 ° C:

Kugadziridza Firmware yeChishandiso

Iyo Smart I / O Controller ine yayo firmware inogona kuvandudzwa nemaoko kuburikidza ne Web Maneja weiyo yakabatana MICROSENS G6 switch. Kuti ugadzirise iyo firmware ita zvinotevera:
Kushandisa the Web Mutungamiriri:

•  Tanga iyo web browser uye isa IP kero yeiyo G6 mudziyo.
•  Log into the Web Maneja ane zvitupa zvemutungamiri.
•  Sarudza iyo Controller skrini, wobva wasarudza iyo tab SIOC uye wobva wakanda pasi kusvika pazasi penhaurirano.
• Muchikamu HTTP(s) upload kuburikidza Web Maneja vhura browser file sarudzo nhaurirano nekudzvanya pane bhatani Bhurawuza:
•  Mu file sarudzo dialogue sarudza firmware yemuno file uye tinya bhatani Ok.
•  Dzvanya pane bhatani Tanga kuti utange kurodha maitiro kune G6 mudziyo.
•  Mushure mekubudirira kurodha iyo file inoonekwa muchikamu chinowanikwa SIOC firmware files pachigadzirwa.

Cherechedza: Iyi rondedzero ine zvese zviripo firmware files yakachengetwa mudhairekitori-chaiyo dhairekitori yeG6 mudziyo ndangariro. Kubvisa izvi file tinya pane bhatani rakasiyana bvisa.

• Kuti uvandudze firmware yemutongi vhura iyo skrini SmartOffice uye chinja kune iyo tab Device Configuration.
•  Muchikamu Device.smart office.device_config skrora pasi kune iyo inotonga controller.
•  Mumunda update firmware isa zita re firmware file iwe unoda kurodha mu controller uye tinya pane bhatani gadziridza firmware.

Cherechedza: Kana iyo ndima yekupinza yasara isina chinhu iyo yazvino firmware file inosarudzwa neyakagadzika.

Kugadzirisa MQTT

Iyo MICROSENS Smart I/O Controller inoshanda seMQTT mutengi wekutumira uye kugamuchira mameseji eMQTT kubva uye kune MQTT bhuroka munetiweki, zvine chekuita nekupinza kwemutongi uye kubuda pachiteshi. Izvi zvakakosha kana iwe uchida kushandisa iyo Smart I / O Controller mumapurojekiti otomatiki nekudyidzana pakati pemidziyo yemumunda.

Prerequisites

Iyo controller inogara ichishanda neIPV6 Link-Local Kero. Naizvozvo, iyo MQTT broker inofanirwa kugoneswa kushanda neIPv6 kero. Zvakadaro, anogona kushandura zviri nyore pakati peIPv4 neIPv6 nekuda kwezvivakwa zveMQTT.

Iyo MQTT protocol inogonesa yakakura kwazvo mhando yemidziyo yakasiyana inoshanda sebroker, muparidzi uye munyoreri pane OSI yekufambisa layer. Chishandiso chinotaurirana chete kuburikidza neTCP port 1883 kana - kana yakagadziriswa - pamusoro Webzvigadziko paPort 9001 zvekutaurirana kwekunze.

Kushandisa Smart Config Tool yeMQTT Configuration

Cherechedza: Shandisa MICROSENS Smart Config Tool yeMQTT kumisikidza yeSmart I/O Controller. Iyo application iripo yekurodha kuburikidza neMICROSENS webnzvimbo (www.microsens.com). Naizvozvo, famba uchienda kupeji yechigadzirwa chemutongi, skira pasi kunzvimbo yakachengeteka yekurodha, uye pinda nemagwaro ako. Kana usati wanyoreswa, tinya pakanzi "Haina kunyoreswa?" kunyorera data rekupinda.
Kugadzirisa zvirongwa zveMQTT sezvinotevera:

1. Tanga Smart Config Tool.
Cherechedza: Ichi chinotakurika cheMicrosoft® Windows® chinoshanda chisina kuisirwa. Kuti uwane ruzivo rwese nezve kushandisa iyo Smart Config Tool ndapota tarisa kune iyo application basa rekubatsira kuburikidza nemabhatani mirairo pane yepamusoro yekurudyi pane.
2. Baya bhatani Scan pane yepamusoro-kuruboshwe pane.

• Mamiriro ekubatanidza: Inoratidza mamiriro ekubatanidza kune MQTT broker (verenga chete).
•  Yakabviswa: Hapana inoshanda yekubatanidza kune MQTT broker mune network.
•  Inogamuchirwa: Iyo Smart I / O Controller yakabatana kune MQTT broker.
•  Nguva yekupera: Kubatana kune MQTT bhuroka kwakavharwa nekuda kwekufamba kwenguva.
•  yakaramba protocol: Iyo MQTT broker yakaramba kubatana nekuda kweiyo isiriyo kana isingazivikanwe MQTT protocol vhezheni.
•  yaramba ID: Mutengesi weMQTT akaramba kubatana nekuda kweiyo ID yemutengi isiriyo.
•  yaramba sevha: Iyo MQTT sevhisi haisipo.
•  yakaramba huchokwadi: Iyo MQTT bhuroka yakaramba kubatana nekuda kwekusashanda kwevatengi
•  yaramba mvumo: Mutengi haana kodzero yekuwana yakakodzera.
•  hazvizivikanwe: Kubatana kwakavharwa nekuda kwezvikonzero zvisingazivikanwe.
•  kubatanidza: Iyo Smart I / O Controller iri kubatanidza kune MQTT bhuroka.
•  kumbomira: Kubatana kwambomira. ID yemutengi: Iyo ID yemutengi inovakwa kubva kune chikamu cheMAC-Adress inoratidzwa pane iyo tab Chishandiso (verenga chete).
•  Mode: Inosarudza iyo MQTT modhi (verenga / nyora). Yakaremara: MQTT yakaremara. QoS 0 (kazhinji kamwe):

1. hapana vimbiso yekutumira meseji
2.  hapana kubvuma kugamuchira meseji neMQTT broker
3.  hapana kuchengetedza kana kutumirazve meseji neMQTT muparidzi
4.  Packet ID inoiswa otomatiki ku "0"

• o QoS 1 (kamwe kamwe):
• garandi yekuendesa meseji zvinobudirira kanenge kamwechete kune bhuroka
•  kuchengetedza uye kutumira zvakare meseji kunze kwekunge yabvumwa nemutengesi
•  kubvuma kune yakasarudzika packet ID chete, saka muparidzi anogona kugovera meseji uye kubvuma o QoS 2 (chaiyo kamwe chete):
•  garandi yekuendesa meseji yese chaiyo nguva imwe kune broker
•  muparidzi uye bhuroka achishandisa ruoko rune zvikamu zvina kutumira uye kubvuma
•  mameseji ekubvuma pakati pemuparidzi nebroker ane ID yepakiti chete yekugovera meseji uye kubvuma

1.  Bhuroka: Inoisa iyo IPv6 kero yeMQTT broker (verenga/nyora).
2.  Username Username yeMQTT bhuroka kuwana (verenga/nyora).
3.  Pasiwedhi: Password yeMQTT broker kuwana (nyora).
4.  Nenguva isipi semaparamita anoshanda ebroker IPv6 kero, zvitupa, uye MQTT modhi zvakaiswa uye bhuroka rinosvikika, iyo MQTT bhuroka yekubatanidza mamiriro inoshanduka kuita "yakagamuchirwa".
5.  Keepalive: Inoisa nguva mumasekondi mukati meiyo controller inotumira meseji kune yayo MQTT broker (verenga / nyora) kuti izvizivise sechipo. Izvi zvinodzivirira kubviswa nebhuroka.
6.  Chengeta: Mureza uyu unosarudza kana mutengesi achachengeta meseji iyi seyekupedzisira sample yenyaya iyi chaiyo. Kana mutengi mutsva weMQTT akanyoresa wenyaya iyi broker anotumira meseji iyi kune anonyoresa.
7.  Topic Prefix: Misoro yeMQTT inogara ichitanga netambo iyi sechiziviso (verenga/nyora).
8.  Will Topic: Iyi "yekupedzisira musoro wenyaya" inotumirwa kune MQTT broker pane yega yekutanga kubatana kana pane paramende shanduko. Iyo bhuroka inoiendesa kune vanyoreri kana iyo controller (semuparidzi) akarasikirwa nekubatanidza kune bhuroka ichiratidza kutadza kwekubatanidza (verenga / nyora).
9.  Will Message: Inoseta meseji yemusoro wekupedzisira kana ukarasikirwa nekubatanidza (verenga / nyora).
10.  Will QoS: Sets iyo MQTT modhi yeyekupedzisira will topic (verenga/nyora) .o Settings inoenderana neMQTT mode settings pamusoro. Inokurudzirwa kushandisa yakakwira QoS nhanho kune yekupedzisira misoro yekuda.
11.  Achachengeta: Kana yakasetwa bhuroka inochengetedza yekupedzisira meseji yekuzivisa vanyoreri vatsva nezve controller yarasa kubatana kwayo kare (verenga / nyora).
12.  Publish uptime: Inoisa nguva mumasekondi iyo mutongi anotumira nguva yake kubhuroka achishandisa musoro unoti " /uptime” (verenga/nyora). o Kuisa iyi parameter ku "0" inodzima basa iri.

Kushandisa MQTT Misoro ine MICROSENS Swichi

Musoro wenyaya unogona kunzwisiswa sechikamu cheshoko. Misoro yakarongwa zvine mutsindo (ine kupfura kwemberi semuganho pakati pemazinga), inofananidzwa ne file sisitimu chimiro (semuenzaniso "Building/Floor1/ Room1/CeilingLight”).
Misoro inotsanangurwa nemushandisi, uko mushandisi-ane hushamwari anozvitsanangura anotsanangura gungano rinoratidzira iyo Smart Kuvaka zvivakwa. Mazita emusoro wenyaya anonzwisa tsitsi (“…/CeilingLight” anosiyana ne “…/ceiling light”) uye inofanira kunge iine munhu mumwe chete. Cherechedza: Zvinogoneka kushandisa ese eUTF-8 mavara (kunze kwe "$" sezvo hunhu uhu huchishandiswa nebroker kune manhamba emukati).
Kushandiswa kweanotevera wildcards kunokwanisika:

Example: "Kuvaka / Floor1/+/Tembiricha"
Musoro uyu unotaura nezve "Tembiricha" ane hukama mameseji emakamuri ese ari pa "Floor1". #: Uyu hunhu hunotsiva akawanda mazinga mumusoro. Example: "Kuvaka / Floor1/#"
Musoro uyu unobata mameseji arikuitika pa "Floor1".

Cherechedza: Kushandiswa kwemakadhi emusango kunobvumirwa kana uchishandisa micro script kunyoresa misoro. Hazvibvumirwi kushandisa MQTT mepu tafura uye kuenzanisa nyaya dzakawanda kuchikamu chimwe chete hazvina kukodzera (semuenzaniso kufananidza sensor kune musoro une makamuri akawanda). Pakumisikidza misoro kana maID zviri nyore zvinogoneka kushandisa zvakasiyana zvakasiyana. Aya anotevera akasiyana neukoshi hwawo anowanikwa:

•  {SMO}: yakagadziriswa mavara "SmartOffice"
•  {MFG}: zita remugadziri akagadziriswa (kureva "MICROSENS")
•  {MAC}: MAC kero yechishandiso
• (Device.factory.device_mac, e.g. “00:60:A7:09:37:4E”)
•  {IP4}: IPv4 kero yemudziyo uyu
• (Device.ip.v4_status.dynamic_device_ip, semuenzaniso “10.100.89.187”)
•  {IP6}: IPv6 kero yemudziyo uyu
• (kana yagoneswa, Device.ip.v6_status.ip, eg “fe80::260:a7ff:fe09:374e/64”)
•  {DMN}: Zita rezita reSmart Office network
• (Device.smartoffice.director_config.domain_name, semuenzaniso "domain1")
•  {ART}: nhamba yechinyorwa chemudziyo uyu
• (Device.factory.article_number, semuenzaniso “MS652119PM”)
•  {SER}: siriyo nhamba yemudziyo uyu
• (Device.factory.serial_number, eg “00345860”)
•  {LOC}: SNMP SysLocation
• (Management.snmp.device_info.sys_location, semuenzaniso “Hofisi”)
•  {NAM}: SNMP SysName
• (Management.SNMP.device_info.sys_name, semuenzaniso “MICROSENS G6 Micro Switch”)

Mavara aya anogona kusanganiswa semuenzaniso mumisoro yakaita se"{SMO}/{MFG}_{MAC}/".
Cherechedza: Izvi zvakasiyana-siyana zvinongogumira pakushandiswa neMICROSENS G6 switch (semuenzaniso, yezvinyorwa zvidiki). Izvo hazvigone kushandiswa kureva neMQTT misoro yeSmart I/O Controller.

Zvinyorwa / Zvishandiso

	MICROSENS Smart IO Controller Inobatanidza Dhijitari Chikamu muIP Network [pdf] Bhuku reMushandisi Smart IO Controller Inobatanidza Dhijitari Chikamu mu IP Network, Smart IO, Controller Inobatanidza Dhijitari Chikamu mu IP Network.
	MICROSENS Smart IO Controller Inobatanidza Dhijitari Chikamu muIP Network [pdf] Bhuku reMushandisi Smart IO Controller Inobatanidza Dhijitari Chikamu muIP Network

References

• User Manual