MICROSENS Smart IO Controller Amaphatikiza Chigawo Cha digito mu IP Network

Kugwiritsa Ntchito Mawotchi

Wowongolera wa MICROSENS Smart I / O ali wokonzeka kumangirizidwa kudzera pazokwera ziwiri zosiyana:

•  A clamp kwa kukwera chipewa chapamwamba cha njanji,
•  ndi ma tabo anayi omangika kuti amangirire khoma, denga kapena zida zilizonse zothandizira.

Top Hat Rail Mounting ndi Demounting

Pansi pake, nyumba ya Smart I / O Controller (Chithunzi 1, Pos. 1) ili ndi clamp poyika chipangizocho panjanji yachipewa chapamwamba (Chithunzi 1, Pos. 2).
Noti: Sonkhanitsani clamp ku nyumba ngati sikunatumizidwe ndi clamp zasinthidwa kale. Onetsetsani kuti clamp's kutulutsa lever (Chithunzi 1, Pos. 3) akulozera ku mbali ndi doko la Efaneti.

Kukwera pa Top Hat Rail

1.  Ikani nyumbayo ndi clampZoyima pamwamba pa njanji ya chipewa chapamwamba (Chithunzi 1, Pos. 4).
2.  Pang'onopang'ono akanikizire nyumba (Chithunzi 1, Pos. 5) mpaka clamp imalowa pachipewa chapamwamba ndikudina momveka.

Kutsika kuchokera ku Top Hat Rail

1.  Kokani chingwe chotulutsa (Chithunzi 2, Pos. 1) kuti mutsegule clamp ndikukweza chipangizocho (Chithunzi 2, Pos. 2) kuti muchotse pa njanji ya chipewa chapamwamba.

Kuyika Masamba

Kuti muphatikize Wolamulira wa Smart I / O mwachindunji pakhoma, padenga, kapena zida zilizonse zoyenera zothandizira, gwiritsani ntchito mabatani anayi okwera (Chithunzi 3, Pos. 1 mpaka 4).

Zindikirani: Onetsetsani kuti mwatchinjiriza cholumikiziracho moyenera mukamagwiritsa ntchito ma tabo ocheperako! Sitikulimbikitsidwa kugwiritsa ntchito tabu imodzi yokha yoyikira kapena zoyikira mbali imodzi yokha.

Kulumikiza Power Supply

The MICROSENS Smart I/O Controller ikhoza kuperekedwa ndi zolowetsa zina ziwiri zamagetsi (imodzi kapena yolumikizana):

1. PoE + (PD) kudzera pa doko la Efaneti (Chithunzi 4, Pos. 1).
2.  24 VDC Yakunja kudzera pa push clamp madoko X21 ndi X22 (Chithunzi 4, Pos. 2)

Kufotokozera kwa Magetsi

Magetsi	Voltage	Kugwiritsa ntchito	Pulagi
PoE/PoE+ PD	44-54 VDC (54 VDC mtundu)	3.2 W	Ethernet uplink port (Chithunzi 4, Pos. 1)
Zakunja	24 VDC	1.2 W	Kankhani clamp madoko X21 ndi X22 pazingwe zamawaya awiri (Chithunzi 4, Pos. 2) Zindikirani: Onetsetsani kuti mwalumikiza chingwe ndi polarity yoyenera!

Zindikirani: Onetsetsani kuti mwayambitsa PoE/PoE+ PD pa chipangizo choyatsira magetsi. Kuti mutsegule PoE pazida za MICROSENS chonde onani zolemba zomwe zatumizidwa ndi chipangizochi.
Mwamsanga pamene magetsi akunja akugwirizanitsidwa ndi clamp madoko X21 ndi X22 mawonekedwe a "Pwr In" amtundu wa LED amawunikira kuwonetsa mphamvu yamagetsi.tage alipo.
Mwamsanga pamene imodzi mwa PoE kapena magetsi akunja atsekedwa ndikupezeka, ma LED amtundu wa doko a "Pwr Out" madoko 1 ndi 2 amawunikira (Chithunzi 4, Pos. 3).

Kuyika ndi PoE Supply 

Pakuyika zida za PoE mumanetiweki amakampani ndikofunikira kutchula za DC supply voltage ya zida zonse pamlingo womwewo wapansi. Nthawi zambiri uku kudzakhala polarity yabwino yolumikizidwa ndi mulingo wapansi wamagetsi a nyumbayo (ie "dziko lapansi").
Kungoganiza kuti, kupatsa mphamvu kwa Smart I / O Controller kumachitika kudzera pa chipangizo chapakati chakutali cha PoE PSE ndikofunikira kulumikiza chiwongolero chokhazikika cha chassis chowongolera (Chithunzi 4, Pos. Kupatula zovuta zachitetezo, malo oyandama a maukonde angayambitse mavuto ngati gawo limodzi lokha mwangozi kapena mwadala likhazikika (Chithunzi 4).

Kuyika ndi Mphamvu Zakunja

Mosiyana ndi wamba ntchito zoipa polarity olumikizidwa kwa mlingo pansi pamene ntchito kunja mphamvu kotunga onetsetsani kulumikiza polarity zabwino za magetsi ndi mlingo pansi.

Bwezeretsani Smart I/O Controller

Smart I/O Controller ili ndi batani lokonzanso pafupi ndi doko la Ethernet (onani Chithunzi 6).
Kukanikiza batani lokhazikitsiranso ndi chinthu cholozera kwa sekondi imodzi kudzakhazikitsanso wowongolera. Panthawi yokonzanso, ma LED onse "Digital Out" (zizindikiro zamadoko X1 mpaka X5) aziwunikira pafupifupi. 8 mphindi.
Zindikirani: Kukanikiza batani lokhazikitsiranso kwa sekondi yopitilira 1 mutangoyambiranso kumathandizira njira ya "Load Bootloader". Izi ndi za ntchito za MICROSENS zokha!

Kulumikiza zingwe zolowetsa/zotulutsa ndikukhazikitsa masinthidwe a DIP

Smart I/O Controller ili ndi ma cl 20-pin push clamp madoko olowetsa ndi kutulutsa ma siginali komanso ma voliyumu olowera ndi otulutsatage (waya awiri 0.1 mpaka 1.5 mm², stranded/olimba). Kuphatikiza apo, 2-way ndi 4-way DIP switch imathandizira zoikamo zapadera zolowetsa ma analogi ndi ma siginecha olowetsa sensa.

Kankhani clamp mapini (X1 mpaka X40) ndi doko la Ethernet uplink ali ndi izi:

Port	Chizindikiro	Tanthauzo
X1, X2	Power Out 1	Kutulutsa mphamvu: 2 x 24 VDC, kuphatikiza kuchuluka kwakukulu 20 mW
X3, X4	Power Out 2
X5, X6	Digital Out 1	Kutulutsa kwa digito: 2x 24 VDC, okhometsa otseguka, PWM (max. 100 Hz) kuphatikiza pakali pano 1 A
X7, X8	Digital Out 2
X9, X10	Digital mu 1	Zolowetsa pa digito: 4x pa. 24 VDC (pachiyambi: otsika <1.0 - 1.3> mkulu) opto-okha Ntchito zamadoko ndi izi: X9, X11, X13, X15: Port voltage pakati pa 0 VDC ndi 24 VDC X10, X12, X14, X16: Madoko olumikizidwa ku 24 VDC (“+”)
X11, X12	Digital mu 2
X13, X14	Digital mu 3
X15, X16	Digital mu 4

 

Port	Chizindikiro	Tanthauzo
X17, X18	PT100/1000 1	Kuyika kwa sensor ya kutentha: Kulowetsa kwa 2x 2-waya kwa Pt100 kapena Pt1000 resistance detectors (RTDs). Zindikirani: Kusankhidwa kwa mtundu wa sensa kwa doko lolowetsamo kutentha kumatha kutsimikiziridwa kudzera pa 2-port DIP switch: · PA 1/2: Pt100 yosankhidwa · KUCHOKERA 1/2: Pt1000 yosankhidwa
X19, X20	PT100/1000 2
X21, X22	Mphamvu mu	Mphamvu zakunja: 1x24 VDC Kugwiritsa ntchito kwambiri mkati 1.2 W
X23, X24, X25	Analogi 1	Zotsatira za analogi: 2 × 0 V kuphatikiza pakali pano 1 A Ntchito zamadoko ndi izi: X23, X26: Madoko olumikizidwa ku 24 VDC (“+”) X24, X27: Port voltage ntchito pakati pa 0 V ≤ UAO ≤ 10 V X25, X28: Madoko olumikizidwa ku GND (“-”)
X26, X27, X28	Analogi 2
X29, X30, X31	Analogi mu 1	Kuyika kwa analogi: 4x 0..10 V (voltage mode) / 0..20 mA (mawonekedwe apano) Ntchito zamadoko ndi izi: X29, X32, X35, X38: Madoko olumikizidwa ku 24 VDC (“+”) X30, X33, X36, X39: Port voltage pakati pa 0 V ≤ UAI ≤ 10 V Doko lomwe lili pakati pa 0 mA ≤ IAI ≤ 20 mA X31, X34, X37, X40: Madoko olumikizidwa ku GND (“-”)   Zindikirani: Kusankhidwa kwamachitidwe a doko lomwelo kumatha kutsimikiziridwa kudzera pa 4-port DIP switch: ON 1/2/3/4: Mmene Panopa (0..20 mA) WOYAMBA 1/2/3/4: Voltage mode (0..10 V)
X32, X33, X34	Analogi mu 2
X35, X36, X37	Analogi mu 3
X38, X39, X40	Analogi mu 4
Efaneti		Ethernet uplink port: 1x 10/100Base-T, RJ-45, PoE (PD)

Kumvetsetsa Ma Status LEDs

MICROSENS Smart I/O Controller ili ndi ma LED asanu ndi anayi omwe akuwonetsa izi:

Port	Chizindikiro	Tanthauzo
X1, X2	Power Out 1	Kutulutsa mphamvu: · Green: Mphamvu yamagetsi ikugwira ntchito · Kuzimitsa Palibe magetsi
X3, X4	Power Out 2
X5, X6	Digital Out 1	Kutulutsa kwa digito: · Chobiriwira: Zotulutsa zimagwira (wokhometsa wotsegula amakoka pansi) · Kuzimitsa: Kutulutsa sikukugwira ntchito   · Sonyezani kukonzanso pamene ma LED onse akuyatsa zobiriwira pafupifupi. 1 mphindi.
X7, X8	Digital Out 2
X9, X10	Digital mu 1	Zolowetsa pa digito: · Wobiriwira: Lowetsani kulumikizana kwatsekedwa · Zolowetsamo tsegulani
X11, X12	Digital mu 2
X13, X14	Digital mu 3
X15, X16	Digital mu 4
X21, X22	Mphamvu mu	Mphamvu zakunja: · Green: Chipangizo choyendetsedwa ndi magetsi akunja · Chotsani Chida chopanda mphamvu kapena choyendetsedwa ndi PoE.

Kugwiritsa ntchito Smart I/O Controller yokhala ndi MICROSENS Switches

Kugwiritsa ntchito MICROSENS Smart I/O Controller ndikotheka ndi masiwichi a MICROSENS okhala ndi firmware 10.7.4a ndi atsopano.
Popeza firmware 5. x wolamulira amathandiza MQTT yomwe imalola kugwira ntchito muzogwiritsira ntchito popanda MICROSENS masiwichi. Pankhaniyi, palibe chifukwa chophatikizira. Kusinthaku kutha kuchitika kudzera pa MICROSENS SmartConfig Chida. Mwamsanga pamene Smart I/O Controller ilumikizidwa ndi magetsi (PoE kapena kunja) ndi ku netiweki yamakampani wowongolera amafikiridwa kudzera pa switch ya MICROSENS yomwe ili ndi MICROSENS SmartDirector.
Zindikirani: Chifukwa chogwiritsa ntchito IPv6 maadiresi am'deralo ndizotheka kugwiritsa ntchito Smart I/O Controller yakutali yokhala ndi MICROSENS switch kudzera pa IPv6 corporate network bola ngati kulumikizana sikukuyenda.6.1 Kuphatikiza Smart I/O Controller ndi MICROSENS Switch Masitepe otsatirawa akufotokoza momwe mungalumikizire Smart I/O Controller kudzera pa Web Woyang'anira chosinthira cha MICORSENS.
Zindikirani: Kwa iziview makamaka kugwiritsa ntchito Web Mtsogoleri akuwonetsedwa. Kugwiritsa ntchito CLI polumikiza zida ndikosavuta chifukwa Web Manager amagwiritsa ntchito malamulo a CLI ngati zilembo zamagawo ndi magawo.
Kugwiritsa ntchito Web Woyang'anira:

• Yambani web osatsegula ndikulowetsa adilesi ya IP ya chipangizo cha G6.
•  Lowani mu Web Woyang'anira wokhala ndi zidziwitso za woyang'anira.
• Sankhani chithunzi cha SmartOffice, kenako sankhani tabu Basic Configuration.
•  Mu gawo Device.smart office.director_config dinani batani jambulani zowongolera zowunikira.
•  SmartDirector imayamba kufunafuna Smart Controllers. Malingana ngati palibe chowongolera chomwe chimapezeka gawo lofufuzidwa la Light Controllers limakhalabe lopanda kanthu.
•  Pambuyo pofufuza bwinobwino ma Smart Controllers omwe alipo Web Woyang'anira amalemba zonse zomwe zapezeka.

Ngati simunatanthauzire "dzina lachida" lapadera mu gawo la Chipangizo. smart office.device_config pa tabu Kusintha kwa Chipangizo m'mbuyomu, kukambirana sikudzawonetsa mabatani okakamiza monga ndi mndandanda wotsikira pansi pamzere wa tebulo la wowongolera. Pankhaniyi, pitirizani ndi sitepe yotsatira. Kupanda kutero, sankhani dzina la chipangizocho pamndandanda ndikudina batani kakamizani awiri ngati.

Zindikirani: Ndikofunikira kwambiri kuti mugawire zofunikira zonse za wowongolera mu gawo Device.smart office.device_config pa tabu Kukonzekera kwa Chipangizo chifukwa chidziwitsochi chimagwiritsidwa ntchito polumikizana. Ngati kasinthidwe kachitika mutatha kuphatikizira zokonda zambiri zamkati ziyenera kukonzedwanso pamanja.

• Sankhani tabu Chipangizo kasinthidwe.
• Dzina la chipangizocho lili ndi mawu oyambira "scanned_" ndi ID yowongolera. Sinthani dzinali ngati pakufunika.
•  Mtundu wa malonda ndi "SMART_IO_CONTROLLER".
•  Chidziwitso cha chipangizochi chimakhala ndi adilesi ya MAC ya chipangizocho.
•  M'gawo la Pairing Actions pamzere wa Smart I/O Controller sankhani chipangizo chomwe chinapangidwa kale kuchokera pamndandanda wotsikirapo ndikudina batani kakamizani awiri ngati.
•  The Smart I/O Controller tsopano yolumikizidwa bwino ndi SmartDirector ya MICROSENS G6 Switch.

Mayeso Ogwira Ntchito a Paired Smart I/O Controller

Masitepe otsatirawa akufotokoza momwe mungayesere kulumikizana koyenera kwa Smart I/O Controller kudzera pa Web Woyang'anira chosinthira cha MICORSENS chophatikizidwa.
Zindikirani: Kwa iziview makamaka kugwiritsa ntchito Web Mtsogoleri akuwonetsedwa. Kugwiritsa ntchito CLI polumikiza zida ndikosavuta chifukwa Web Manager amagwiritsa ntchito malamulo a CLI ngati zilembo zamagawo ndi magawo.
Kugwiritsa ntchito Web Woyang'anira:

•  Sankhani chophimba cha Controller, kenako sankhani tabu SIO.
•  Mu gawo Device.controller.smart_io_config madoko onse omwe alipo a Smart I/O Controller alembedwa.
•  Saka the parameter dout1 mode for the port “Digital Out 1” and select a value from the drop-down list that matches your application.
•  Click on the button apply to running configuration to save the changes to the running configuration. Saka the parameter manual set output, enter the value “dout1 1” and click on the button manual set output.
•  Doko la LED la "Digital Out 1" liyenera kuyatsa kuwonetsa kuti kutulutsa kwa digito kumayikidwa pamlingo wapamwamba wa digito.
•  Pazotulutsa zamtundu wagawo, lowetsani mtengo "dout1 0" ndikudina batani lokhazikitsira zolemba.
•  Doko la LED la "Digital Out 1" liyenera kuyatsa kuwonetsa kutulutsa kwa digito kwayikidwa pamlingo wotsika wa digito.

Zindikirani: Ngati mayeso ophatikizawa alephera yesani kuphatikiza Wowongolera wa Smart I/O kuyambira pachiyambi.

Kugwiritsa Ntchito Zolowetsa za Analogue ndi Zotulutsa
Doko lililonse la analogi ndi zotulutsa (X23 mpaka X40) lili ndi magawo atatu aliwonse:

•  "+": Doko ili lolumikizidwa ndi 24 VDC.
•  "-": Doko ili lolumikizidwa ndi 0 V (GND).
•  "AO"/"AI": Voltage mtengo umatchulidwa 0 V (GND).

Zolowetsa ndi zotulutsa zimatanthawuza mtengo wa 0 V (positive polarity)
Example pogwiritsira ntchito microscript yokhala ndi Smart I/O Controller Ports
Zindikirani: Kuti mumve zambiri zamomwe mungagwiritsire ntchito ma micro script chonde onani buku la "micro script Programmers Guide" loperekedwa ndi MICROSENS G6 Switch ndipo likupezeka kudzera pa. Web Woyang'anira pansi pa chinthu cha menyu
“Zolemba”. Example akuwonetsa khodi ya macro script yowerengera mtengo wa kutentha (madoko 17/18) ndikuyika zotulutsa za digito (madoko 5/6) kuchokera ku 0 mpaka 1 mukafika pachimake kutentha kwa 24.5 °C:

Kusintha Firmware ya Chipangizo

Smart I/O Controller ili ndi firmware yake yomwe imatha kusinthidwa pamanja kudzera pa Web Woyang'anira cholumikizira cholumikizidwa cha MICROSENS G6. Kuti muwonjezere firmware, chitani izi:
Kugwiritsa ntchito Web Woyang'anira:

•  Yambani web osatsegula ndikulowetsa adilesi ya IP ya chipangizo cha G6.
•  Lowani mu Web Woyang'anira wokhala ndi zidziwitso za woyang'anira.
•  Sankhani chophimba cha Controller, kenako sankhani tabu SIOC ndikusunthira pansi mpaka pansi pazokambirana.
• M'gawo HTTP(s) upload kudzera Web Manager tsegulani osatsegula file kukambirana posankha ndikudina batani Sakatulani:
•  Mu file kusankha kukambirana kusankha firmware yakomweko file ndikudina batani Chabwino.
•  Dinani pa batani Yambani kuti muyambe kuyika pa chipangizo cha G6.
•  Pambuyo bwinobwino kweza ndi file zikuwoneka mu gawo lomwe likupezeka SIOC firmware files pa chipangizo.

Zindikirani: Mndandandawu uli ndi firmware yonse yomwe ilipo files zosungidwa mu bukhu lachidziwitso lachidziwitso cha chipangizo cha G6. Kuchotsa izi file dinani batani kuchotsa.

• Kuti musinthe firmware ya woyang'anira, tsegulani SmartOffice ndikusintha tabu Kusintha kwa Chipangizo.
•  Mu gawo Device.smart office.device_config pendani pansi kwa woyang'anira.
•  M'munda zosintha firmware lowetsani dzina la firmware file mukufuna kutsitsa mu controller ndikudina batani Sinthani firmware.

Zindikirani: Ngati gawo lolowera lisiyidwa lopanda kanthu firmware yatsopano file imasankhidwa mwachisawawa.

Kusintha kwa MQTT

The MICROSENS Smart I/O Controller imagwira ntchito ngati kasitomala wa MQTT potumiza ndi kulandira mauthenga a MQTT kuchokera kwa broker wa MQTT pamanetiweki, ponena za momwe wolamulira amalowetsa ndi zotulutsa. Izi ndizofunikira ngati mukufuna kugwiritsa ntchito Smart I/O Controller pama projekiti ongopanga okha ndi kulumikizana pakati pa zida zakumunda.

Zofunikira

Wowongolera nthawi zonse amagwira ntchito ndi IPV6 Link-Local Address. Chifukwa chake, broker ya MQTT iyenera kuthandizidwa kuti igwire ntchito ndi ma adilesi a IPv6. Komabe, amatha kumasulira mosavuta pakati pa IPv4 ndi IPv6 chifukwa cha kamangidwe ka MQTT.

Protocol ya MQTT imathandizira zida zambiri zosiyanasiyana zomwe zimakhala ngati broker, osindikiza ndi olembetsa pagawo la OSI. Chipangizocho chimalankhulana kokha kudzera pa doko la TCP 1883 kapena - ngati litasinthidwa - kupitirira Websockets pa Port 9001 zolumikizirana zakunja.

Kugwiritsa Ntchito Smart Config Tool pa MQTT Configuration

Zindikirani: Gwiritsani ntchito MICROSENS Smart Config Tool pakusintha kwa MQTT kwa Smart I/O Controller. Pulogalamuyi ikupezeka kuti mutsitse kudzera pa MICROSENS webtsamba (www.microsens.com). Chifukwa chake, pitani patsamba lazogulitsa za owongolera, pindani pansi mpaka pamalo otetezedwa otsitsidwa, ndikulowetsani ndi zidziwitso zanu. Ngati simunalembetsebe, dinani "Osalembetsa?" kulembetsa data yolowera.
Kusintha makonda a MQTT motere:

1. Yambitsani Chida cha Smart Config.
Zindikirani: Iyi ndi pulogalamu yam'manja ya Microsoft® Windows® yomwe imagwira ntchito popanda kukhazikitsa. Kuti mudziwe zambiri za kugwiritsa ntchito Smart Config Tool chonde onani ntchito yothandizira pulogalamuyo kudzera pa batani la malangizo omwe ali patsamba lakumanja.
2. Dinani batani Jambulani pa zenera lapamwamba kumanzere.

• Mkhalidwe Wolumikizira: Imawonetsa mawonekedwe olumikizirana ndi broker wa MQTT (werengani kokha).
•  Osalumikizidwa: Palibe kulumikizana komwe kumachitika ndi broker wa MQTT pa netiweki.
•  Chovomerezeka: Smart I/O Controller imalumikizidwa ndi broker wa MQTT.
•  Nthawi yatha: Kulumikizana kwa broker wa MQTT kwatsekedwa chifukwa chanthawi yake.
•  anakana protocol: Wogulitsa MQTT anakana kulumikizana chifukwa cha mtundu wa protocol wa MQTT wolakwika kapena wosadziwika.
•  wakana ID: Wogulitsa MQTT anakana kulumikizana chifukwa cha ID yolakwika ya kasitomala.
•  seva yokana: Ntchito ya MQTT palibe.
•  anakana kutsimikizika: Wogulitsa MQTT anakana kulumikizidwa chifukwa cha zidziwitso zosavomerezeka za kasitomala
•  anakana chilolezo: Wofuna chithandizo alibe ufulu wofikira.
•  osadziwika: Kulumikizana kudatsekedwa chifukwa chazifukwa zosadziwika.
•  kulumikiza: The Smart I/O Controller ikulumikizana ndi MQTT broker.
•  kuyimitsidwa: Kulumikizana kwayimitsidwa. ID ya kasitomala: ID ya kasitomala yomwe imapangidwa kuchokera kugawo la MAC-Adress yomwe ikuwonetsedwa pa tabu Chipangizo (werengani kokha).
•  Mawonekedwe: Imasankha mtundu wa MQTT (werengani / lembani). Olemala: MQTT yayimitsidwa. QoS 0 (nthawi zambiri):

1. palibe chitsimikizo cha kutumiza uthenga
2.  palibe kuvomereza kulandira uthenga ndi broker wa MQTT
3.  palibe kusunga kapena kutumizanso uthengawu ndi wofalitsa wa MQTT
4.  ID ya paketi idakhazikitsidwa kuti "0"

• o QoS 1 (osachepera kamodzi):
• chitsimikizo chopereka uthenga bwino kamodzi kwa broker
•  kusunga ndi kutumizanso uthengawo pokhapokha atavomerezedwa ndi broker
•  chivomerezo chili ndi ID ya paketi yapadera yokha, kotero wosindikizayo atha kugawira uthenga ndi kuvomereza o QoS 2 (kamodzi ndendende):
•  chitsimikizo chopereka uthenga uliwonse ndendende nthawi imodzi kwa broker
•  wofalitsa ndi broker pogwiritsa ntchito magawo anayi kugwirana chanza potumiza ndi kuvomereza
•  mauthenga ovomerezeka pakati pa wofalitsa ndi broker ali ndi ID ya paketi kuti agawire uthenga ndi kuyamikira

1.  Broker: Imakhazikitsa adilesi ya IPv6 ya broker ya MQTT (werengani/lembani).
2.  Dzina lolowera: Dzina lolowera la MQTT broker access (werengani/lembani).
3.  Mawu achinsinsi: Mawu achinsinsi a MQTT broker access (lembani).
4.  Posachedwapa monga magawo ovomerezeka a adilesi ya IPv6 ya broker, zidziwitso, ndi mawonekedwe a MQTT akhazikitsidwa ndipo broker amatha kupezeka, mawonekedwe olumikizana ndi broker wa MQTT amasintha kukhala "ovomerezeka".
5.  Keepalive: Imayika nthawi mumasekondi momwe wolamulira amatumiza uthenga kwa broker wake wa MQTT (werengani / kulemba) kuti adzidziwitse ngati mphatso. Izi zimalepheretsa kulumikizidwa ndi broker.
6.  Sungani: Mbendera iyi imatsimikizira ngati broker adzasunga uthengawu ngati s womaliza wovomerezekaample pa mutu wapaderawu. Ngati kasitomala watsopano wa MQTT alembetsa pamutuwu broker atumiza uthengawu kwa olembetsa.
7.  Mutu Woyamba: Mitu ya MQTT nthawi zonse imayamba ndi chingwechi ngati chizindikiritso (werengani/lembani).
8.  Mutu wa Will: "Mutu womaliza" uwu umatumizidwa kwa broker wa MQTT pakulumikizana koyamba kulikonse kapena pakusintha kwa magawo. Wogulitsayo amatumiza kwa olembetsa ngati wolamulira (monga wofalitsa) ataya kulumikiza kwa broker kusonyeza kulephera kwa kugwirizana (kuwerenga / kulemba).
9.  Adzatumiza Uthenga: Imayika uthenga wa mutu womaliza ngati kutayika kwa kulumikizana (werengani/lembani).
10.  Kodi QoS: Imakhazikitsa mawonekedwe a MQTT pamutu womaliza (werengani/lemba) .o Zikhazikiko zimagwirizana ndi mawonekedwe a MQTT pamwambapa. Ndikofunikira kugwiritsa ntchito mulingo wapamwamba wa QoS pamitu yomaliza.
11.  Adzasunga: Ngati wakhazikitsa broker amasunga uthenga womaliza wodziwitsa olembetsa atsopano kuti wowongolera wataya kulumikizana kwake kale (werengani / lembani).
12.  Ptsegulani nthawi: Imayika nthawi mumasekondi pomwe wowongolera amatumiza nthawi yake kwa broker pogwiritsa ntchito mutu wakuti " /nthawi yomaliza” (werengani/lembani). o Kuyika chizindikiro ichi kukhala "0" kumalepheretsa ntchitoyi.

Kugwiritsa Ntchito Mitu ya MQTT yokhala ndi MICROSENS Switches

Mutu ukhoza kumveka ngati gulu la uthenga. Mitu imasanjidwa motsatira dongosolo (ndi slash yakutsogolo ngati chodulira pakati pa milingo), kufananiza ndi file dongosolo dongosolo (mwachitsanzo “Building/Floor1/Room1/CeilingLight”).
Mitu imatanthauzidwa ndi wogwiritsa ntchito, pomwe msonkhano wodziyimira wosavuta wodzifotokozera umawonetsa mawonekedwe a Smart Building. Mayina amitu amakhudzidwa kwambiri (“…/CeilingLight” amasiyana ndi “…/ceiling light”) ndipo akuyenera kukhala ndi chilembo chimodzi. Zindikirani: Ndizotheka kugwiritsa ntchito zilembo zilizonse za UTF-8 (kupatula "$" popeza munthuyu amagwiritsidwa ntchito ndi broker pazowerengera zamkati).
Kugwiritsiridwa ntchito kwa mitundu yotsatirayi ndikotheka:

Example: "Kumanga/Pansi1/+/Kutentha"
Mutuwu ukunena za mauthenga okhudzana ndi "Kutentha" m'zipinda zonse za "Floor1". #: Munthu uyu alowa m'malo angapo pamutu. Eksample: "Kumanga / Pansi1 / #"
Mutuwu ukukhudza mauthenga onse omwe akuchitika pa "Floor1".

Zindikirani: Kugwiritsa ntchito ma wildcards kumaloledwa mukamagwiritsa ntchito micro script kulembetsa mitu. Sizololedwa kugwiritsa ntchito tebulo la mapu a MQTT ndikufananitsa mitu yambiri ku gawo limodzi lokha sikoyenera (mwachitsanzo kufananitsa sensa ndi mutu wokhala ndi zipinda zingapo). Kuti mukhazikitse mitu kapena ma ID mosavuta ndizotheka kugwiritsa ntchito mitundu ina. Zosintha zotsatirazi ndi mtengo wake zilipo:

•  {SMO}: mawu osasunthika "SmartOffice"
•  {MFG}: dzina la wopanga (ie "MICROSENS")
•  {MAC}: adilesi ya MAC ya chipangizocho
• (Device.factory.device_mac, e.g. “00:60:A7:09:37:4E”)
•  {IP4}: IPv4 adilesi ya chipangizochi
• (Device.ip.v4_status.dynamic_device_ip, mwachitsanzo “10.100.89.187”)
•  {IP6}: IPv6 adilesi ya chipangizochi
• (ngati yayatsidwa, Device.ip.v6_status.ip, mwachitsanzo “fe80::260:a7ff:fe09:374e/64”)
•  {DMN}: Dzina lachidziwitso cha netiweki ya Smart Office
• (Device.smartoffice.director_config.domain_name, mwachitsanzo “domain1”)
•  {ART}: nambala yankhani ya chipangizochi
• (Device.factory.article_number, mwachitsanzo “MS652119PM”)
•  {SER}: siriyo nambala ya chipangizochi
• (Device.factory.serial_number, mwachitsanzo “00345860”)
•  {LOC}: SNMP SysLocation
• (Management.snmp.device_info.sys_location, mwachitsanzo “Ofesi”)
•  {NAM}: SNMP SysName
• (Management.SNMP.device_info.sys_name, mwachitsanzo “MICROSENS G6 Micro Switch”)

Zosinthazi zitha kuphatikizidwa mwachitsanzo mumitu ngati “{SMO}/{MFG}_{MAC}/”.
Zindikirani: Zosinthazi zimangogwiritsidwa ntchito ndi masiwichi a MICROSENS G6 (mwachitsanzo, zolemba zazing'ono). Sangagwiritsidwe ntchito mwachitsanzo ndi mitu ya MQTT ya Smart I/O Controller.

Zolemba / Zothandizira

	MICROSENS Smart IO Controller Amaphatikiza Chigawo Cha digito mu IP Network [pdf] Buku Logwiritsa Ntchito Smart IO Controller Imaphatikiza Gawo la Digital mu IP Network, Smart IO, Wowongolera Amaphatikiza Gawo la Digital mu IP Network
	MICROSENS Smart IO Controller Amaphatikiza Chigawo Cha digito mu IP Network [pdf] Buku Logwiritsa Ntchito Smart IO Controller Amaphatikiza Digital Component mu IP Network

Maumboni

• Buku Logwiritsa Ntchito