MICROSENS Smart IO Controller e Kopanya Karolo ea Digital ho IP Network

Ho sebetsana le mechini

MICROSENS Smart I/O Controller e se e loketse ho hokelloa ka li-mounting tse peli tse fapaneng:

•  A clamp bakeng sa ho roala likatiba tse holimo,
•  le li-tab tse 'ne tse hokeloang ka kotloloho leboteng, siling kapa lisebelisoa life kapa life tse tšehetsang.

Top Hat Rail Mounting le Demounting

Ka lehlakoreng la eona le ka tlaase, ntlo ea Smart I / O Controller (Setšoantšo sa 1, Pos. 1) e na le cl.amp bakeng sa ho kenya sesebelisoa holim'a seporo se tloaelehileng sa top-hat (Setšoantšo sa 1, Pos. 2).
Note: Bokella sehlopha sa clamp ho ea matlong haeba e sa romelloa ka clamp e seng e hlophisitsoe. Etsa bonnete ba hore clamp's tokollo lever (Figure 1, Pos. 3) e supa ka lehlakoreng le nang le Ethernet port.

Ho hloella holim'a Top Hat Rail

1.  Beha ntlo le clamp'S e emisitsoeng holim'a seporo sa katiba se holimo (setšoantšo sa 1, Pos. 4).
2.  Ka bonolo tobetsa ea matlo (Figure 1, Pos. 5) ho fihlela clamp e kena ka har'a seporo sa katiba e holimo ka ho penya ka mokhoa o utloahalang.

Ho theoha ho tloha Top Hat Rail

1.  Hula sekhahla sa tokollo (Setšoantšo sa 2, Pos. 1) ho notlolla clamp 'me u phahamise sesebelisoa (setšoantšo sa 2, Pos. 2) ho se tlosa seporong sa top-hat.

Lisebelisoa tsa ho Nyolla

Ho hokela Smart I / O Controller ka ho toba leboteng, siling, kapa lisebelisoa tse ling tse loketseng tse tšehetsang, sebelisa li-brackets tse 'nè tse ntseng li phahama (Setšoantšo sa 3, Pos. 1 ho 4).

Hlokomela: Etsa bonnete ba hore u boloka sephutheloana ka mokhoa o lekaneng ha u sebelisa li-tab tse fokolang tsa ho kenya! Ha e khothalletsoe ho sebelisa tabo e le 'ngoe feela ea ho kenya kapa li-tab tse kenyang lehlakoreng le le leng feela.

Ho hokela Phepelo ea Matla

MICROSENS Smart I/O Controller e ka fanoa ka lisebelisoa tse peli tse fapaneng tsa matla (e le 'ngoe kapa e kopane):

1. PoE + (PD) ka Ethernet port (Setšoantšo sa 4, Pos. 1).
2.  Ka ntle 24 VDC ka push clamp likoung X21 le X22 (Setšoantšo sa 4, Pos. 2)

Litlhaloso tsa Phepelo ea Matla

Phepelo ea motlakase	Moqtage	Tshebediso	Plug
PoE/PoE+ PD	44 - 54 VDC (54 VDC mofuta.)	3.2 W	Ethernet uplink port (Setšoantšo sa 4, Pos. 1)
Kantle	24 VDC	1.2 W	Sututsa clamp likoung X21 le X22 bakeng sa thapo ea terata tse peli (Setšoantšo sa 4, Pos. 2) Hlokomela: Etsa bonnete ba hore o hokahanya thapo le polarity e nepahetseng!

Hlokomela: Etsa bonnete ba hore u nolofalletsa PoE/PoE+ PD sesebelisoa sa motlakase. Bakeng sa ho nolofalletsa PoE lisebelisoa tsa MICROSENS ka kopo sheba litokomane tse tsamaisanang le sesebelisoa.
Hang ha phepelo ea motlakase e kantle e hokahane le clamp likoung X21 le X22 boemo ba boema-kepe ba "Pwr In" bo fapaneng ba LED bo khantša ho bonts'a matla a phepelo.tage teng.
Hang ha e 'ngoe ea matla a PoE kapa a ka ntle e kenngoa 'me e le teng, boemo ba boema-kepe ba li-LED tsa "Pwr Out" li-port 1 le 2 li khantša (Setšoantšo sa 4, Pos. 3).

Ho theha ka PoE Supply 

Bakeng sa ho kenya likarolo tsa PoE marang-rang a khoebo hoa hlokahala ho supa phepelo ea DC voltage ea lisebelisoa tsohle ho isa boemong bo lekanang ba fatše. Ka tloaelo ena e tla ba polarity e ntle e hokahaneng le boemo bo tlase ba sistimi ea motlakase ea moaho (ke hore “lefatše”).
Ho nka hore, matla a Smart I/O Controller a etsoa ka sesebelisoa sa PoE sa PSE se bohareng se hole ho bohlokoa ho hokahanya sebaka sa motheo sa chassis ea molaoli (Setšoantšo sa 4, Pos. mathata a fatše.” Ntle le litaba tsa polokeho, sebaka se phaphametseng sa marang-rang se ka baka mathata haeba karolo e le 'ngoe feela ka phoso kapa ka boomo e theiloe fatše (Setšoantšo sa 4).

Ho Fokotsa ka Phepelo ea Matla ka Ntle

Ho fapana le ts'ebeliso e tloaelehileng ea polarity e mpe e amanang le boemo ba fatše ha u sebelisa matla a ka ntle ho etsa bonnete ba hore o hokahanya polarity e ntle ea matla a matla ho ea boemong ba fatše.

Seta bocha Smart I/O Controller

Smart I/O Controller e na le konopo ea reset haufi le koung ea Ethernet (bona Setšoantšo sa 6).
Ho tobetsa konopo ea reset ka ntho e supang motsotsoana oa 1 ho tla seta molaoli bocha. Nakong ea ts'ebetso ea ho tsosolosa, li-LED ka bobeli "Digital Out" (lipontšo tsa li-port X5 ho X8) li tla khantša ka hoo e ka bang. 1 motsotsoana.
Hlokomela: Ho tobetsa konopo ea reset bakeng sa metsotsoana e fetang 1 ka mor'a ho qala bocha ho nolofalletsa mokhoa oa "Load Bootloader". Sena ke sa merero ea litšebeletso tsa MICROSENS feela!

Ho hokela Lithapo tsa ho Kena/Ho Tsoa le ho Seta Li-Switch tsa DIP

Smart I/O Controller e na le lisebelisoa tse peli tsa 20-pin push clamp likou bakeng sa matšoao a ho kenya le ho tsoa hammoho le ho kenya le ho hlahisa matlatage (terata bophara 0.1 ho 1.5 mm², stranded/tiileng). Ho feta moo, sesebelisoa sa 2-way le 4-way DIP se nolofalletsa litlhophiso tse khethehileng bakeng sa ho kenya analog le matšoao a ho kenya sensor.

The push clamp pins (X1 ho X40) le Ethernet uplink port li na le mesebetsi e latelang:

Boema-kepe	Letshwao	Tlhaloso
X1, X2	Motlakase 1	Motlakase: 2x 24 VDC, boima bo kopaneng bo boholo ba 20 mW
X3, X4	Motlakase 2
X5, X6	Digital Out 1	Tlhahiso ea dijithale: 2x 24 VDC, 'mokelli ea bulehileng, PWM (max. 100 Hz) kopanetsweng boholo ba jwale 1 A
X7, X8	Digital Out 2
X9, X10	Dijithale ho 1	Kenyelletso ea dijithale: 4x boholo. 24 VDC (moeli: tlase <1.0 - 1.3 > phahameng) opto-isolated Likabelo tsa koung ke tse latelang: · X9, X11, X13, X15: Port voltage pakeng tsa 0 VDC le 24 VDC · X10, X12, X14, X16: Maemakepe a hoketsweng ho 24 VDC (“+”)
X11, X12	Dijithale ho 2
X13, X14	Dijithale ho 3
X15, X16	Dijithale ho 4

 

Boema-kepe	Letshwao	Tlhaloso
X17, X18	PT100/1000 1	Kenyelletso ea sensor ea mocheso: 2x 2-terata keno bakeng sa Pt100 kapa Pt1000 ea ho hanyetsa mocheso oa mocheso (RTDs). Hlokomela: Khetho ea mofuta oa sensor bakeng sa koung ea ho kenya mocheso e fapaneng e ka khethoa ka switch ea 2-port DIP: · KA 1/2: Pt100 e khethiloe · HO TLOHA 1/2: Pt1000 e khethiloe
X19, X20	PT100/1000 2
X21, X22	Power In	Matla a tsoang kantle: 1x24 VDC boholo ba tšebeliso ea ka hare 1.2 W
X23, X24, X25	Analog Out 1	Sephetho sa Analog: 2x 0..10 V kopanetsweng boholo ba jwale 1 A Likabelo tsa koung ke tse latelang: X23, X26: Maemakepe a hoketsweng ho 24 VDC (“+”) · X24, X27: Port voltage sebelisitsoe lipakeng tsa 0 V ≤ UAO ≤ 10 V X25, X28: Maemakepe a hoketsweng ho GND (“-”)
X26, X27, X28	Analog Out 2
X29, X30, X31	Analog ho 1	Kenyelletso ea analogue: 4x 0..10 V (voltage mode) / 0..20 mA (mokhoa oa hajoale) Likabelo tsa koung li tjena: · X29, X32, X35, X38: Maemakepe a hoketsweng ho 24 VDC (“+”) · X30, X33, X36, X39: Port voltage pakeng tsa 0 V ≤ UAI ≤ 10 V Boema-kepe bo pakeng tsa 0 mA ≤ IAI ≤ 20 mA · X31, X34, X37, X40: Maemakepe a hoketsweng ho GND (“-”)   Hlokomela: Khetho ea mokhoa oa boema-kepe bo fapaneng e ka khethoa ka 4-port DIP switch: · KA 1/2/3/4: Mokhoa oa hajoale (0..20 mA) · HO TLOHA 1/2/3/4: Moqtagmokhoa oa e (0..10 V)
X32, X33, X34	Analog ho 2
X35, X36, X37	Analog ho 3
X38, X39, X40	Analog ho 4
Ethernet		Ethernet uplink port: 1x 10/100Base-T, RJ-45, PoE (PD)

Ho utloisisa boemo ba LED

MICROSENS Smart I/O Controller e na le li-LED tsa maemo a robong tse bonts'ang lets'oao le latelang:

Boema-kepe	Letshwao	Tlhaloso
X1, X2	Motlakase 1	Motlakase: · Botala: Phepelo ea motlakase e sebetsa · Off Ha ho phepelo ea motlakase
X3, X4	Motlakase 2
X5, X6	Digital Out 1	Tlhahiso ea dijithale: · Botala: Se hlahisoang se sebetsa (mokelli ea bulehileng o hula tlase) • Off: Output ha e sebetse   · Bontša ho seta bocha ha li-LED ka bobeli li khantša botala bakeng sa hoo e ka bang. 1 motsotsoana.
X7, X8	Digital Out 2
X9, X10	Dijithale ho 1	Kenyelletso ea dijithale: · Botala: Lebitso le kenyang le koetsoe · Kenyelletso e koetsoeng e butsoe
X11, X12	Dijithale ho 2
X13, X14	Dijithale ho 3
X15, X16	Dijithale ho 4
X21, X22	Power In	Matla a tsoang kantle: · Botala: Sesebelisoa se tsamaisoa ke motlakase oa kantle · Off Sesebelisoa ha se na matla kapa se tsamaisoa ke PoE.

Ho sebelisa Smart I/O Controller ka MICROSENS Swichi

Ho sebelisa MICROSENS Smart I/O Controller hoa khoneha ka li-switches tsa MICROSENS tse nang le firmware 10.7.4a le tse ncha.
Ho tloha ka firmware 5. x molaoli o tšehetsa MQTT e lumellang ho sebetsa lits'ebetsong ntle le li-switch tsa MICROSENS. Tabeng ena, ha ho hlokahale ho kopanya. Tokiso e ka etsoa ka MICROSENS SmartConfig Sesebelisoa. Hang ha Smart I/O Controller e hokahantsoe le phepelo ea motlakase (PoE kapa phepelo ea kantle) le marang-rang a khoebo molaoli o fumaneha ka sesebelisoa sa MICROSENS se nang le MICROSENS SmartDirector.
Hlokomela: Ka lebaka la ho sebelisa liaterese tsa sebaka sa IPv6 hoa khoneha ho sebelisa Smart I/O Controller e hole ka MICROSENS switjha ka marangrang a k'hamphani ea IPv6 ha feela khokahanyo e sa tsamaee.6.1 Ho kopanya Smart I/O Controller le MICROSENS Switch Mehato e latelang e hlalosa mokhoa oa ho hokahanya Smart I/O Controller ka ho Web Motsamaisi oa sesebelisoa sa MICORSENS.
Hlokomela: Bakeng sa senaview haholo-holo tšebeliso ea Web Motsamaisi oa bontšoa. Ho sebelisa CLI bakeng sa ho kopanya lisebelisoa ho bonolo hobane ho Web Motsamaisi o sebelisa litaelo tse fapaneng tsa CLI joalo ka lileibole tsa masimo le likarolo.
Ho sebelisa the Web Motsamaisi:

• Qala ho web 'me u kenye aterese ea IP ea sesebelisoa sa G6.
•  Kena ho Web Motsamaisi ea nang le mangolo a molaoli.
• Khetha skrine ea SmartOffice, ebe u khetha tab "Basic Configuration".
•  Karolong ea Device.smart office.director_config tobetsa konopo ea ho hlahloba lilaoli tsa mabone.
•  SmartDirector e qala ho batla Smart Controllers. Hafeela ho se na molaoli ea fumanoang karolo e hlahlojoang Light Controllers e lula e se na letho.
•  Ka mor'a ho hlahloba ka katleho li-Smart Controllers tse fumanehang Web Motsamaisi o thathamisa lilaoli tsohle tse fumanoeng.

Haeba u sa hlalosa "lebitso la sesebelisoa" le ikhethang karolong ea Device. smart office.device_config ho thebo Tlhophiso ya sesebediswa nakong e fetileng, moqoqo o ke ke wa bontsha dikonopo tse pedi jwalo ka le lenane la ho theola tlase mothalong wa tafole ya molaodi. Tabeng ena, tsoela pele ka mohato o latelang. Ho seng joalo, khetha lebitso la sesebelisoa se fapaneng ho tsoa lenaneng ebe o tobetsa konopo qobella para e le.

Hlokomela: Ho khothaletsoa ka matla ho abela litekanyetso tsohle tse hlokahalang tsa paramethara karolong ea Device.smart office.device_config ho tab Setlhophiso sa sesebelisoa hobane tlhahisoleseling ena e sebelisoa nakong ea ts'ebetso ea ho para. Haeba tlhophiso e etsahala ka mor'a ts'ebetso ea ho hokahanya, litlhophiso tse ngata tsa ka hare li tlameha ho etsoa hape ka letsoho.

• Khetha tab ea Device Configuration.
• Lebitso la sesebelisoa le na le sehlongoapele "scanned_" le ID ea molaoli. Fetola lebitso lena ha ho hlokahala.
•  Mofuta oa sehlahisoa ke “SMART_IO_CONTROLLER”.
•  ID ea sesebelisoa e na le aterese ea MAC ea sesebelisoa.
•  Khomong ea Liketso tsa Pairing tsa mola o fapaneng oa Smart I/O Controller khetha sesebelisoa se hlahisitsoeng pele lethathamong le theoha ebe o tobetsa konopo qobella para e le.
•  Smart I/O Controller e se e pentiloe ka nepo ho SmartDirector ea MICROSENS G6 Switch.

Teko ea Ts'ebetso ea Mookameli oa Pair Smart I/O

Mehato e latelang e hlalosa mokhoa oa ho leka ho hokahanya ha Smart I/O Controller ka ho Web Motsamaisi oa switch ea MICORSENS e tsamaisanang.
Hlokomela: Bakeng sa senaview haholo-holo tšebeliso ea Web Motsamaisi oa bontšoa. Ho sebelisa CLI bakeng sa ho kopanya lisebelisoa ho bonolo hobane ho Web Motsamaisi o sebelisa litaelo tse fapaneng tsa CLI joalo ka lileibole tsa masimo le likarolo.
Ho sebelisa the Web Motsamaisi:

•  Khetha skrine ea Controller, ebe u khetha tab SIO.
•  Karolong ena, Device.controller.smart_io_config likou tsohle tse fumanehang tsa Smart I/O Controller li thathamisitsoe.
•  Batla the parameter dout1 mode for the port “Digital Out 1” and select a value from the drop-down list that matches your application.
•  Click on the button apply to running configuration to save the changes to the running configuration. Batla the parameter manual set output, enter the value “dout1 1” and click on the button manual set output.
•  Boemo ba boema-kepe ba LED ba "Digital Out 1" bo lokela ho khantša ho bonts'a hore tlhahiso ea dijithale e behiloe boemong bo phahameng ba dijithale.
•  Bakeng sa tlhahiso ea sete ea paramethara, kenya boleng ba "dout1 0" ebe o tobetsa konopo ea setoutu se hlahisoang.
•  Boemo ba boema-kepe ba LED ba "Digital Out 1" bo lokela ho tima ho bonts'a hore tlhahiso ea dijithale e behiloe boemong bo tlase ba dijithale.

Hlokomela: Haeba tlhahlobo ena ea ho kopanya e hloleha leka ho hokahanya Smart I/O Controller hape ho tloha qalong.

Ho Sebelisa Li-ports tsa Analogue le Output
Boema-kepe bo bong le bo bong ba analog le tlhahiso (X23 ho X40) bo na le likarolo tse 3 e 'ngoe le e 'ngoe:

•  "+": Kou ena e hokahane le 24 VDC.
•  "-": Kou ena e hokahane le 0 V (GND).
•  “AO”/“AI”: Moqtagboleng bo boletsoeng ho 0 V (GND).

Boleng ba ho kenya le ho tsoa bo bolela boleng ba litšupiso 0 V (positive polarity)
Example bakeng sa ho sebelisa mongolo o monyane o nang le Smart I/O Controller Ports
Hlokomela: Bakeng sa tlhaiso-leseling e batsi mabapi le mokhoa oa ho sebelisa mongolo o monyane ka kopo sheba bukana ea "micro script Programmers Guide" e fanoeng ka MICROSENS G6 Switch mme e fumaneha ka tsela. Web Motsamaisi tlas'a ntho ea menu
“Litokomane”.Mohlala o latelangample e bonts'a khoutu ea macro bakeng sa ho bala boleng ba mocheso (boema-kepe ba 17/18) le ho beha tlhahiso ea dijithale (likou tsa 5/6) ho tloha ho 0 ho isa ho 1 ha u fihla moeling oa mocheso oa 24.5 °C:

Ho nchafatsa Firmware ea Sesebelisoa

Smart I/O Controller e na le firmware ea eona e ka nchafatsoang ka letsoho ka Web Motsamaisi oa sesebelisoa se hokahaneng sa MICROSENS G6. Ho ntlafatsa firmware, etsa tse latelang:
Ho sebelisa the Web Motsamaisi:

•  Qala ho web 'me u kenye aterese ea IP ea sesebelisoa sa G6.
•  Kena ho Web Motsamaisi ea nang le mangolo a molaoli.
•  Khetha skrineng sa Controller, ebe u khetha tabo ea SIOC ebe u tsamaisetsa tlase tlase moqoqong.
• Karolong ea HTTP(li) kenya ka Web Motsamaisi bula sebatli file moqoqo oa khetho ka ho tobetsa konopo Batla:
•  Ho file moqoqo oa khetho khetha firmware ea lehae file ebe o tobetsa konopo Ok.
•  Tobetsa konopo ea Qala ho qala ts'ebetso ea ho kenya mochine oa G6.
•  Ka mor'a hore ka katleho kenya file e hlaha karolong e fumanehang ea SIOC firmware files ho sesebelisoa.

Hlokomela: Lenane lena le na le firmware eohle e fumanehang files e bolokiloeng bukeng e ikhethileng ea molaoli ea memori ea sesebelisoa sa G6. Ho tlosa sena file tobetsa konopo e loketseng tlosa.

• Ho ntjhafatsa firmware ya molaodi bula skrine SmartOffice mme o fetohele ho tab ya Device Configuration.
•  Karolong ea Device.smart office.device_config theolela tlase ho molaoli ea fapaneng.
•  Lebaleng update firmware kenya lebitso la firmware file o batla ho kenya ka har'a molaoli ebe o tobetsa konopo apdeita firmware.

Hlokomela: Haeba sebaka sa ho kenya se siiloe se se na letho, firmware ea morao-rao file e khethoa ka mokhoa oa kamehla.

E lokisa MQTT

MICROSENS Smart I/O Controller e sebetsa joalo ka moreki oa MQTT bakeng sa ho romella le ho amohela melaetsa ea MQTT ho tsoa le ho ea ho morekisi oa MQTT marangrang, mabapi le ho kenya le ho tsoa ha koung ea molaoli. Sena ke sa bohlokoa haeba u batla ho sebelisa Smart I/O Controller mererong ea boiketsetso ka tšebelisano lipakeng tsa lisebelisoa tsa masimong.

Lintho tse hlokahalang

Molaoli o lula a sebetsa le IPV6 Link-Local Addresses. Ka hona, morekisi oa MQTT o tlameha ho fuoa monyetla oa ho sebetsa le liaterese tsa IPv6. Leha ho le joalo, a ka fetolela habonolo lipakeng tsa IPv4 le IPv6 ka lebaka la boqapi ba MQTT.

Protocol ea MQTT e thusa mefuta e mengata haholo ea lisebelisoa tse fapaneng tse sebetsang e le morekisi, mohatisi le morekisi ho lera la lipalangoang la OSI. Sesebelisoa se buisana feela ka TCP port 1883 kapa - haeba se fetotsoe - ho feta Webli-sockets ho Port 9001 bakeng sa likhokahano tsa kantle.

Ho sebelisa Smart Config Tool bakeng sa MQTT Configuration

Hlokomela: Sebelisa MICROSENS Smart Config Tool bakeng sa tlhophiso ea MQTT ea Smart I/O Controller. Sesebelisoa se fumaneha bakeng sa ho khoasolla ka MICROSENS websebaka (www.microsens.com). Ka hona, ea leqepheng la sehlahisoa sa molaoli, theolela tlase sebakeng se sireletsehileng sa ho jarolla, 'me u kene ka mangolo a hau. Haeba ha u e-so ngolisoe, tlanya ho "Ha ua ngolisoa?" ho etsa kopo ya data ya ho kena.
Ho lokisa litlhophiso tsa MQTT ka tsela e latelang:

1. Qala Smart Config Tool.
Hlokomela: Ena ke sesebelisoa sa Microsoft® Windows® se nkehang habonolo se sebetsang ntle le ho kenya. Bakeng sa tlhaiso-leseling e akaretsang mabapi le ho sebelisa Smart Config Tool ka kopo sheba tšebetso ea thuso ea sesebelisoa ka konopo ea litaelo fenstereng e kaholimo ho le letona.
2. Tobetsa konopo Skena karolong e ka holimo ea letsoho le letšehali.

• Boemo ba Khokelo: E bonts'a boemo ba khokahano ho broker ea MQTT (bala feela).
•  E khaotsoe: Ha ho khokahanyo e sebetsang ho broker ea MQTT netwekeng.
•  E amohetsoe: Smart I/O Controller e hokahane le morekisi oa MQTT.
•  Nako ea ho felloa ke nako: Khokahano ho broker ea MQTT e koetsoe ka lebaka la nako e felileng.
•  e hanne protocol: Morekisi oa MQTT o hanne khokahano ka lebaka la mofuta o fosahetseng kapa o sa tsejoeng oa protocol ea MQTT.
•  e hanne ID: Morekisi oa MQTT o hanne khokahano ka lebaka la ID e sa sebetseng ea moreki.
•  seva se hanne: Tshebeletso ya MQTT ha e teng.
•  e hanne ho netefatsoa: Morekisi oa MQTT o hanne khokahano ka lebaka la mangolo a fosahetseng a moreki
•  e hanne tumello: Moreki ha a na litokelo tse loketseng tsa phihlello.
•  e sa tsejoeng: Khokahano e koetsoe ka lebaka la mabaka a sa tsejoeng.
•  ho hokela: Smart I/O Controller e hokela ho MQTT broker.
•  emisitsoe: Khokahano e emisitsoe. ID ea Client: ID ea moreki e hahiloeng ho tsoa karolong ea MAC-Adress e bonts'itsoeng tabeng "Sesebediswa" (bala feela).
•  Mokhoa: E khetha mokhoa oa MQTT (bala / ngola). E holofetse: MQTT e holofetse. QoS 0 (hangata hang):

1. ha ho tiiso ea ho fana ka molaetsa
2.  ha ho kananelo ea ho amohela molaetsa ke morekisi oa MQTT
3.  ha ho na ho boloka kapa ho fetisa molaetsa hape ka mohatisi oa MQTT
4.  Pakete ID e behiloe ka bo eona ho "0"

• o QoS 1 (bonyane hang):
• tiisetso ea ho fana ka molaetsa ka katleho bonyane nako e le 'ngoe ho morekisi
•  ho boloka le ho fetisa molaetsa hape ntle le kananelo ea morekisi
•  kananelo e na le ID ea pakete e ikhethang feela, kahoo mohatisi a ka fana ka molaetsa le kananelo o QoS 2 (hantle hang):
•  tiisetso ea ho fana ka molaetsa o mong le o mong hantle hang ho morekisi
•  mohatisi le morekisi ea sebelisang ho ts'oarana ka matsoho ka likarolo tse 'ne bakeng sa ho romella le ho leboha
•  melaetsa ea kananelo lipakeng tsa mohatisi le morekisi e na le ID ea pakete feela ho fana ka molaetsa le liteboho.

1.  Broker: E beha aterese ea IPv6 ea morekisi oa MQTT (bala/ngola).
2.  Username: Username bakeng sa phihlello ea broker ea MQTT (bala/ngola).
3.  Lekunutu: Phasewete bakeng sa phihlello ya morekisi wa MQTT (ngola).
4.  Hang hang kaha li-parameter tse nepahetseng bakeng sa aterese ea IPv6 ea broker, lintlha, le mokhoa oa MQTT li setiloe 'me broker e fumaneha, boemo ba khokahanyo ea MQTT bo fetoha "ho amoheloa".
5.  Keepalive: E beha nako ka metsotsoana eo ka eona molaoli a romellang molaetsa ho mofani oa eona oa MQTT (bala / ngola) ho itlhahisa e le mpho. Sena se thibela ho hangoa ke morekisi.
6.  Boloka: Folakha ena e etsa qeto ea hore na morekisi o tla boloka molaetsa ona e le sample bakeng sa sehlooho sena se khethehileng. Haeba moreki e mocha oa MQTT a ingolisa bakeng sa sehlooho sena morekisi o fetisetsa molaetsa ona ho morekisi.
7.  Sehlohlolo sa Sehlooho: Lihlooho tsa MQTT li tla lula li qala ka khoele ena joalo ka sesupo (bala/ngola).
8.  Sehlooho sa Will: "Sehlooho sena sa ho qetela" se romelloa ho morekisi oa MQTT khokahanyong e 'ngoe le e' ngoe ea pele kapa phetohong ea paramethara. Morekisi o e fetisetsa ho ba ngolisitseng haeba molaoli (e le mohatisi) a lahleheloa ke khokahanyo ho broker e bontšang ho hlōleha ha khokahanyo (bala / ngola).
9.  Thato Molaetsa: E beha molaetsa bakeng sa sehlooho sa thato ea ho qetela molemong oa tahlehelo ea khokahano (bala/ngola).
10.  Tla QoS: Seta mokhoa oa MQTT bakeng sa sehlooho sa thato ea ho qetela (bala/ngola).o Litlhophiso li lumellana le litlhophiso tsa mokhoa oa MQTT ka holimo. Ho khothalletsoa ho sebelisa boemo bo phahameng ba QoS bakeng sa lihlooho tsa thato ea ho qetela.
11.  E Tla Boloka: Haeba e behiloe, morekisi o boloka molaetsa oa thato ea ho qetela ho tsebisa ba ngolisitseng ba bacha hore molaoli o lahlehetsoe ke khokahano ea eona pele (bala/ngola).
12.  Pbula nako: E beha nako ka metsotsoana eo molaoli a romellang nako ea eona ho morekisi a sebelisa sehlooho " /uptime” (bala/ngola). o Ho beha paramente ena ho "0" ho tima ts'ebetso ena.

Ho sebelisa Lihlooho tsa MQTT ka MICROSENS Swichi

Sehlooho se ka utloisisoa e le sehlopha sa molaetsa. Lihlooho li hlophisitsoe ho ea ka maemo (ka sekhahla sa pele e le sekhao lipakeng tsa maemo), se bapisoang le file sebopeho sa tsamaiso (mohlala, “Building/Floor1/ Room1/CeilingLight”).
Lihlooho li hlalosoa ke mosebelisi, moo kopano e itlhalosang e itlhalosang e bonts'ang lisebelisoa tsa Smart Building. Mabitso a sehlooho ha a na taba (“…/CeilingLight” a fapane le “…/ceiling light”) mme a tlameha ho ba le bonyane tlhaku e le 'ngoe. Hlokomela: Hoa khoneha ho sebelisa litlhaku tsohle tsa UTF-8 (ntle le "$" kaha sebapali sena se sebelisoa ke broker bakeng sa lipalo-palo tsa ka hare).
Ho ka khoneha ho sebelisa li-wildcards tse latelang:

Example: “Mohaho/Mokato1/+/Mocheso”
Sehlooho sena se sebetsana le melaetsa e amanang le "Mocheso" bakeng sa likamore tsohle ho "Floor1". #: Sebapali sena se nka sebaka sa maemo a mangata sehloohong. Example: “Mohaho/Mokato1/#”
Sehlooho sena se bua ka melaetsa eohle e hlahang "Floor1".

Hlokomela: Tšebeliso ea li-wildcards e lumelloa ha u sebelisa micro script ho ngolisa lihlooho. Ha e lumelloe ho sebelisa tafole ea 'mapa ea MQTT le ho bapisa lihlooho tse ngata le karolo e le' ngoe feela ha hoa lokela (mohlala, ho bapisa sensor le sehlooho se nang le likamore tse ngata). Bakeng sa ho theha lihlooho kapa li-ID ho bonolo ho sebelisa mefuta e itseng. Ho na le mefuta e latelang e nang le boleng ba eona:

•  {SMO}: mongolo o tsitsitseng "SmartOffice"
•  {MFG}: lebitso la moetsi ea tsitsitseng (ke hore "MICROSENS")
•  {MAC}: Aterese ea MAC ea sesebelisoa
• (Device.factory.device_mac, e.g. “00:60:A7:09:37:4E”)
•  {IP4}: IPv4 aterese ea sesebelisoa sena
• (Device.ip.v4_status.dynamic_device_ip, mohlala “10.100.89.187”)
•  {IP6}: IPv6 aterese ea sesebelisoa sena
• (haeba e butswe, Device.ip.v6_status.ip, mohlala, “fe80::260:a7ff:fe09:374e/64”)
•  {DMN}: Lebitso la domain la marangrang a Smart Office
• (Device.smartoffice.director_config.domain_name, mohlala, "domain1")
•  {ART}: nomoro ea sengoloa ea sesebelisoa sena
• (Device.factory.article_number, mohlala, “MS652119PM”)
•  {SER}: nomoro ea serial ea sesebelisoa sena
• (Device.factory.serial_number, mohlala, “00345860”)
•  {LOC}: SNMP SysLocation
• (Management.snmp.device_info.sys_location, mohlala, “Ofisi”)
•  {NAM}: SNMP SysName
• (Management.SNMP.device_info.sys_name, mohlala, “MICROSENS G6 Micro Switch”)

Liphetoho li ka kopanngoa, mohlala, lihloohong tse kang “{SMO}/{MFG}_{MAC}/”.
Hlokomela: Liphetoho tsena li lekanyelitsoe ho sebelisoa ka li-switch tsa MICROSENS G6 (mohlala, bakeng sa mangolo a manyenyane). Li ke ke tsa sebelisoa ke hore, ka lihlooho tsa MQTT tsa Smart I/O Controller.

Litokomane / Lisebelisoa

	MICROSENS Smart IO Controller e Kopanya Karolo ea Digital ho IP Network [pdf] Bukana ea Mosebelisi Smart IO Controller e Kopanya Karolo ea Digital ho IP Network, Smart IO, Controller e Kopanya Karolo ea Dijithale ho IP Network.
	MICROSENS Smart IO Controller e Kopanya Karolo ea Digital ho IP Network [pdf] Bukana ea Mosebelisi Smart IO Controller e Kopanya Karolo ea Digital ho IP Network

Litšupiso

• Bukana ea Mosebelisi