MICROSENS Ntse IO Controller muab cov khoom sib xyaw ua ke rau hauv IP Network

Neeg Kho Tshuab Tuav

Lub MICROSENS Ntse I/O Controller tau npaj txhij los txuas ntawm ob qhov sib txawv:

•  Ib clamp rau saum lub kaus mom rail mounting,
•  thiab plaub mounting tabs rau kev txuas ncaj qha rau phab ntsa, qab nthab lossis lwm yam khoom siv rov qab.

Sab saum toj Hat Rail Mounting thiab Demounting

Ntawm nws sab hauv qab, Smart I/O Controller vaj tse (Daim duab 1, Pos. 1) yog nruab nrog cl.amp rau mounting lub cuab yeej mus rau ib tug txheej txheem saum toj kawg nkaus-lub kaus mom rail (Daim duab 1, Pos. 2).
Note: Sib sau ua ke clamp mus rau lub tsev yog tsis xa nrog clamp twb yoog lawm. Nco ntsoov clamp's tso tawm qib (Daim duab 1, Pos. 3) yog taw tes rau sab nrog Ethernet chaw nres nkoj.

Mounting ntawm Sab saum toj Hat Rail

1.  Muab lub tsev nrog lub clamp's nyob ruaj ruaj rau saum lub kaus mom rail (Daim duab 1, Pos. 4).
2.  Maj mam nias lub vaj tsev (Daim duab 1, Pos. 5) kom txog thaum lub clamp snaps rau hauv lub kaus mom sab saum toj nrog lub suab nyem.

Demounting los ntawm Top Hat Rail

1.  Rub lub khawm tso tawm (Daim duab 2, Pos. 1) kom qhib lub clamp thiab nqa lub cuab yeej (Daim duab 2, Pos. 2) kom tshem tawm ntawm lub kaus mom sab saum toj.

Mounting Tabs

Txhawm rau txuas Smart I/O Controller ncaj qha rau ntawm phab ntsa, qab nthab, lossis lwm yam khoom siv rov qab tsim nyog, siv plaub lub mounting brackets (Daim duab 3, Pos. 1 txog 4).

Nco tseg: Nco ntsoov khaws cov ntawv txuas kom txaus thaum siv cov tabs txuas tsawg dua! Nws tsis pom zoo kom siv tsuas yog ib lub mounting tab lossis mounting tabs ntawm ib sab xwb.

Txuas Cov Khoom Siv Hluav Taws Xob

Lub MICROSENS Smart I/O Controller tuaj yeem muab los ntawm ob lub zog hloov pauv (ib zaug lossis sib koom ua ke):

1. PoE + (PD) ntawm Ethernet chaw nres nkoj (Daim duab 4, Pos. 1).
2.  Sab nraud 24 VDC ntawm kev thawb clamp ports X21 thiab X22 (Daim duab 4, Pos. 2)

Cov Khoom Siv Hluav Taws Xob Specifications

Fais fab mov	Voltage	Kev noj haus	Plug
PoE/PoE + PD	44-54 VDC (54 VDC typ.)	3.2 W	Ethernet uplink chaw nres nkoj (Daim duab 4, Pos. 1)
Sab nraud	24 VDC	1.2 W	Sib clamp ports X21 thiab X22 rau ob-xaim cable (Daim duab 4, Pos. 2) Nco tseg: Nco ntsoov txuas lub cable nrog qhov tseeb polarity!

Nco tseg: Nco ntsoov ua kom PoE / PoE + PD ntawm lub tshuab hluav taws xob. Txhawm rau ua kom PoE ntawm MICROSENS cov khoom siv thov xa mus rau cov ntaub ntawv xa mus nrog lub cuab yeej.
Sai li qhov hluav taws xob sab nraud txuas nrog lub clamp ports X21 thiab X22 qhov "Pwr Hauv" chaw nres nkoj raws li txoj cai LED teeb qhia txog cov khoom siv voltage yog tam.
Sai li ib qho ntawm PoE lossis cov khoom siv hluav taws xob sab nraud tau ntsaws rau hauv thiab tam sim no, qhov chaw nres nkoj LEDs ntawm "Pwr Out" ports 1 thiab 2 teeb (Daim duab 4, Pos. 3).

Grounding nrog PoE Supply 

Rau kev teeb tsa ntawm PoE Cheebtsam hauv kev sib koom tes, nws yog ib qho tsim nyog yuav tsum tau siv cov khoom siv DC voltage ntawm txhua yam khoom siv mus rau tib theem av. Feem ntau qhov no yuav yog qhov zoo polarity txuas rau hauv av theem ntawm lub tsev hluav taws xob system (xws li "lub ntiaj teb").
Piv txwv li, lub hwj chim ntawm Smart I/O Controller yog ua tiav los ntawm lub hauv paus chaw nyob deb ntawm PoE PSE ntaus ntawv nws yog ib qho tseem ceeb rau kev txuas cov grounding lead ntawm tus maub los lub chassis (Daim duab 4, Pos. 4 rau lub tsev lub peev xwm hauv av thiab yog li kom tsis txhob " Dhau li ntawm qhov teeb meem kev nyab xeeb, lub hauv av ntab ntawm lub network tuaj yeem ua teeb meem yog tias tsuas yog ib qho kev cuam tshuam los yog lub hom phiaj yog hauv av (Daim duab 5).

Grounding nrog External Power Supply

Nyob rau hauv sib piv rau cov kev siv tsis zoo polarity txuas nrog rau hauv av theem thaum siv ib tug sab nraud fais fab mov kom paub tseeb tias yuav txuas qhov zoo polarity ntawm lub hwj chim mov mus rau hauv av.

Pib dua lub Smart I/O Controller

Smart I/O Controller yog nruab nrog lub pob pib dua ib sab ntawm Ethernet chaw nres nkoj (saib daim duab 6).
Nias lub pob rov pib dua nrog ib qho khoom taw qhia rau 1 thib ob yuav rov pib dua tus maub los. Thaum lub sijhawm rov pib ua haujlwm, ob lub LEDs "Digital Out" (qhov taw qhia rau cov chaw nres nkoj X5 txog X8) yuav teeb rau kwv yees. 1 thib ob.
Nco tseg: Nias lub pob pib dua rau ntau tshaj 1 thib ob tom qab reboot ua rau hom "Load Bootloader". Qhov no tsuas yog rau kev pabcuam MICROSENS nkaus xwb!

Txuas cov Input/Output Cables thiab Teem DIP Hloov

Smart I/O Controller yog nruab nrog ob lub 20-pin push clamp ports rau input thiab output signals li input thiab output voltage (xaim txoj kab uas hla 0.1 txog 1.5 mm², stranded / khoom). Tsis tas li ntawd, 2-txoj kev thiab 4-txoj kev DIP hloov ua kom muaj kev teeb tsa tshwj xeeb rau cov tswv yim analog thiab cov cim tawm tswv yim.

Lub zog clamp pins (X1 txog X40) thiab Ethernet uplink chaw nres nkoj muaj cov haujlwm hauv qab no:

Chaw nres nkoj	Teeb liab	Lub ntsiab lus
X1, X 2	Fais fab tuag 1	Lub zog tso zis: 2 x 24 VDC, ua ke siab tshaj load 20 mW
X3, X 4	Fais fab tuag 2
X5, X 6	Digital Out 1	Cov zis: 2 x 24 VDC, qhib collector, PWM (max. 100 Hz) ua ke siab tshaj tam sim no 1 A
X7, X 8	Digital Out 2
X9, X 10	Digital Hauv 1	Digital input: 4 x max. 24 VDC (qhov pib: qis <1.0 - 1.3> siab) opto-kho tawm Cov haujlwm ntawm chaw nres nkoj yog raws li nram no: · X9, X11, X13, X15: Port voltage ntawm 0 VDC thiab 24 VDC · X10, X12, X14, X16: Ports txuas nrog 24 VDC ("+")
X11, X 12	Digital Hauv 2
X13, X 14	Digital Hauv 3
X15, X 16	Digital Hauv 4

 

Chaw nres nkoj	Teeb liab	Lub ntsiab lus
X17, X 18	PT100/1000 1	Kub sensor input: 2x 2-xaim tswv yim rau Pt100 lossis Pt1000 tsis kam ntsuas kub ntsuas (RTDs). Nco tseg: Kev xaiv hom sensor rau qhov ntsuas kub qhov chaw nres nkoj tuaj yeem txiav txim siab ntawm 2-chaw nres nkoj DIP hloov: · ON 1/2: Pt100 xaiv · OFF 1/2: Pt1000 xaiv
X19, X 20	PT100/1000 2
X21, X 22	Fais fab hauv	External zog input: 1 x 24 VDC Kev siv sab hauv siab tshaj plaws 1.2 W
X 23 X 24 X 25	Analog tawm 1	Analog tso zis: 2 x 0..10v ua ke siab tshaj tam sim no 1 A Cov haujlwm ntawm chaw nres nkoj yog raws li nram no: · X23, X26: Ports txuas nrog 24 VDC ("+") · X24, X27: Port voltage thov ntawm 0 V ≤ UAO ≤ 10 V · X25, X28: Chaw nres nkoj txuas nrog GND (“-”)
X 26 X 27 X 28	Analog tawm 2
X 29 X 30 X 31	Analog hauv 1	Analogue tswv yim: 4x 0..10 V (voltage hom) / 0..20 mA (tam sim no hom) Qhov chaw nres nkoj assignments yog raws li nram no: · X29, X32, X35, X38: Ports txuas nrog 24 VDC ("+") · X30, X33, X36, X39: Port voltage ntawm 0 V ≤ UAI ≤ 10 V Chaw nres nkoj tam sim no ntawm 0 mA ≤ IAI ≤ 20 mA · X31, X34, X37, X40: Ports txuas nrog GND (“-”)   Nco tseg: Kev xaiv hom ntawm qhov chaw nres nkoj tuaj yeem txiav txim siab ntawm 4-chaw nres nkoj DIP hloov: ON 1/2/3/4: Tam sim no hom (0..20 mA) · OFF 1/2/3/4: Voltage hom (0..10V)
X 32 X 33 X 34	Analog hauv 2
X 35 X 36 X 37	Analog hauv 3
X 38 X 39 X 40	Analog hauv 4
Ethernet		Ethernet uplink chaw nres nkoj: 1 x 10/100Base-T, RJ-45, PoE (PD)

Nkag siab txog Status LEDs

MICROSENS Smart I/O Controller yog nruab nrog cuaj xwm txheej LEDs qhia cov teeb liab hauv qab no:

Chaw nres nkoj	Teeb liab	Lub ntsiab lus
X1, X 2	Fais fab tuag 1	Lub zog tso zis: · Ntsuab: Fais fab mov nquag · Tawm Tsis muaj hluav taws xob
X3, X 4	Fais fab tuag 2
X5, X 6	Digital Out 1	Cov zis: · Ntsuab: Tso zis nquag (qhib cov khoom rub tawm qis) · Tawm: Tso zis tsis ua haujlwm   · Qhia qhov pib dua thaum ob lub LEDs teeb ntsuab rau kwv yees. 1 thib ob.
X7, X 8	Digital Out 2
X9, X 10	Digital Hauv 1	Digital input: · Ntsuab: Input contact kaw · Off Input qhib
X11, X 12	Digital Hauv 2
X13, X 14	Digital Hauv 3
X15, X 16	Digital Hauv 4
X21, X 22	Fais fab hauv	External zog input: · Ntsuab: Cov cuab yeej siv los ntawm cov khoom siv hluav taws xob sab nraud · Off Device unpowered los yog powered los ntawm PoE.

Ua haujlwm Smart I/O Controller nrog MICROSENS Hloov

Siv MICROSENS Ntse I/O Controller yog ua tau nrog MICROSENS keyboards uas muaj firmware 10.7.4a thiab tshiab dua.
Txij li thaum firmware 5. x tus maub los txhawb MQTT uas tso cai rau ua haujlwm hauv cov ntawv thov yam tsis muaj MICROSENS keyboards. Hauv qhov no, tsis tas yuav tsum muaj kev sib koom ua ke. Kev teeb tsa tuaj yeem ua tiav ntawm MICROSENS SmartConfig Tool. Thaum lub Smart I/O Controller txuas nrog lub hwj huam mov (PoE lossis cov khoom siv sab nraud) thiab rau lub koom haum network, tus maub los siv tau los ntawm kev hloov MICROSENS uas muaj MICROSENS SmartDirector.
Nco tseg: Vim yog siv IPv6 txuas-chaw nyob hauv zos nws muaj peev xwm ua haujlwm rau cov chaw taws teeb Smart I/O Controller nrog MICROSENS hloov ntawm IPv6 cov neeg koom tes sib koom tes ntev npaum li qhov kev sib txuas tsis tau hla.6.1 Pairing Smart I/O Controller thiab MICROSENS Hloov Cov kauj ruam hauv qab no piav qhia yuav ua li cas ua khub Smart I/O Controller ntawm lub Web Tus thawj tswj ntawm MICORSENS hloov.
Nco tseg: Rau qhov no dhau lawmview feem ntau yog siv cov Web Tus thawj coj tau qhia. Siv CLI rau kev sib txuas cov cuab yeej siv tau yooj yim vim tias cov Web Tus Thawj Saib Xyuas siv cov lus txib CLI raws li cov ntawv sau rau thaj chaw thiab ntu.
Siv cov Web Tus Thawj Coj:

• Pib lub web browser thiab nkag mus rau IP chaw nyob ntawm G6 ntaus ntawv.
•  Nkag mus rau hauv Web Tus thawj tswj hwm nrog cov ntawv pov thawj tswj hwm.
• Xaiv lub SmartOffice npo, ces xaiv tab Basic Configuration.
•  Hauv seem Device.smart office.director_config nyem rau ntawm lub pob scan lub teeb controllers.
•  Lub SmartDirector pib tshawb rau Smart Controllers. Tsuav tsis muaj tus tswj tau pom qhov seem scanned Light Controllers nyob twj ywm.
•  Tom qab ua tiav scanning rau muaj Smart Controllers lub Web Tus thawj tswj teev tag nrho cov tswj tau pom.

Yog tias koj tsis tau txhais qhov tshwj xeeb "lub npe ntawm lub cuab yeej" hauv ntu Ntaus. smart office.device_config ntawm lub tab Device configuration yav dhau los, qhov kev sib tham yuav tsis qhia ib tug khawm quab yuam khub li thiab cov npe drop-down nyob rau hauv tus maub los lub rooj kab. Hauv qhov no, mus rau kauj ruam tom ntej. Txwv tsis pub, xaiv lub npe ntaus ntawv los ntawm cov npe thiab nyem rau ntawm lub pob quab yuam khub li.

Nco tseg: Nws raug pom zoo kom muab tag nrho qhov tsim nyog qhov tseem ceeb ntawm tus maub los hauv ntu Device.smart office.device_config ntawm lub tab Ntaus teeb tsa vim tias cov ntaub ntawv no tau siv thaum lub sijhawm ua khub. Yog hais tias lub configuration tshwm sim tom qab lub pairing txheej txheem, ntau lub internal settings yuav tsum tau reworked manually.

• Xaiv lub tab Device Configuration.
• Lub npe ntaus ntawv muaj cov npe "scanned_" thiab tus maub los ID. Hloov lub npe no raws li xav tau.
•  Cov khoom lag luam yog "SMART_IO_CONTROLLER".
•  Tus ntaus ID los ntawm lub neej ntawd muaj cov cuab yeej MAC chaw nyob.
•  Nyob rau hauv kem Pairing Actions ntawm cov kab Smart I/O Controller kab xaiv lub yav tas los generated ntaus ntawv los ntawm lub nco-down daim ntawv teev thiab nias rau ntawm lub khawm quab yuam khub li.
•  Lub Smart I/O Controller tam sim no tau ua khub zoo rau SmartDirector ntawm MICROSENS G6 Hloov.

Kev Xeem Ua Haujlwm ntawm Paired Smart I/O Controller

Cov kauj ruam hauv qab no piav qhia yuav ua li cas los ntsuas qhov tseeb ua khub ntawm Smart I/O Controller ntawm lub Web Tus thawj coj ntawm kev ua khub MICORSENS hloov.
Nco tseg: Rau qhov no dhau lawmview feem ntau yog siv cov Web Tus thawj coj tau qhia. Siv CLI rau kev sib txuas cov cuab yeej siv tau yooj yim vim tias cov Web Tus Thawj Saib Xyuas siv cov lus txib CLI raws li cov ntawv sau rau thaj chaw thiab ntu.
Siv cov Web Tus Thawj Coj:

•  Xaiv lub Controller screen, ces xaiv lub tab SIO.
•  Hauv seem Device.controller.smart_io_config tag nrho cov chaw nres nkoj muaj nyob ntawm tus khub Smart I/O Controller tau teev tseg.
•  Nrhiav rau the parameter dout1 mode for the port “Digital Out 1” and select a value from the drop-down list that matches your application.
•  Click on the button apply to running configuration to save the changes to the running configuration. Nrhiav rau the parameter manual set output, enter the value “dout1 1” and click on the button manual set output.
•  Qhov chaw nres nkoj raws li txoj cai LED ntawm "Digital Out 1" yuav tsum teeb ntawm qhov qhia tias cov zis tawm tau teeb tsa rau qib siab digital.
•  Rau qhov parameter phau ntawv teev cov zis, nkag mus rau tus nqi "dout1 0" thiab nyem rau ntawm lub pob phau ntawv teev cov zis.
•  Qhov chaw nres nkoj xwm txheej LED ntawm "Digital Out 1" yuav tsum teeb tawm qhia tias cov zis digital tau teeb tsa rau qib qis digital.

Nco tseg: Yog tias qhov kev sib koom ua ke no tsis ua tiav sim ua khub Smart I/O Controller dua los ntawm qhov pib.

Siv Analogue Input thiab Output Ports
Txhua qhov analog input thiab output chaw nres nkoj (X23 txog X40) muaj 3 qhov chaw txhua qhov:

•  "+": Qhov chaw nres nkoj no txuas nrog 24 VDC.
•  "-": Qhov chaw nres nkoj no txuas nrog 0 V (GND).
•  “AO”/“AI”: The real voltage tus nqi xa mus rau 0 V (GND).

Cov kev tawm tswv yim thiab cov txiaj ntsig tau xa mus rau tus nqi siv 0 V (zoo polarity)
Example rau siv micro tsab ntawv nrog Smart I/O Controller Ports
Nco tseg: Yog xav paub ntxiv txog kev siv micro script thov mus saib cov khoom siv phau ntawv "micro script Programmers Guide" muab nrog MICROSENS G6 Hloov thiab muaj nyob ntawm Web Manager nyob rau hauv cov zaub mov
“Cov ntaub ntawv”.Cov nram qab no example qhia macro tsab cai rau kev nyeem tus nqi ntsuas kub (chaw nres nkoj 17/18) thiab teeb tsa cov zis digital (ports 5/6) ntawm 0 txog 1 thaum ncav cuag qhov kub ntawm 24.5 ° C:

Hloov kho lub Device's Firmware

Smart I/O Controller muaj nws tus kheej firmware uas tuaj yeem hloov kho manually ntawm tus Web Tus thawj coj ntawm kev sib txuas MICROSENS G6 hloov. Txhawm rau hloov kho lub firmware ua raws li hauv qab no:
Siv cov Web Tus Thawj Coj:

•  Pib lub web browser thiab nkag mus rau IP chaw nyob ntawm G6 ntaus ntawv.
•  Nkag mus rau hauv Web Tus thawj tswj hwm nrog cov ntawv pov thawj tswj hwm.
•  Xaiv lub Controller screen, tom qab ntawd xaiv lub tab SIOC thiab nqes mus rau hauv qab ntawm qhov kev sib tham.
• Hauv ntu HTTP(s) upload ntawm Web Manager qhib qhov browser's file xaiv kev sib tham nrog nias rau ntawm lub pob Xauj:
•  Hauv file xaiv dialogue xaiv lub zos firmware file thiab nias lub pob Ok.
•  Nyem rau ntawm lub pob Pib pib cov txheej txheem upload rau G6 ntaus ntawv.
•  Tom qab ua tiav uploading lub file nws tshwm nyob rau hauv seem muaj SIOC firmware files ntawm tus ntaus ntawv.

Nco tseg: Daim ntawv teev npe no muaj tag nrho cov firmware muaj files khaws cia rau hauv cov kab ke tswj tshwj xeeb ntawm G6 ntaus ntawv lub cim xeeb. Tshem tawm qhov no file nyem rau ntawm qhov khawm tshem tawm.

• Txhawm rau hloov kho tus maub los lub firmware qhib lub vijtsam SmartOffice thiab hloov mus rau tab Device Configuration.
•  Hauv ntu Device.smart office.device_config scroll down mus rau tus tswj hwm.
•  Hauv daim teb hloov tshiab firmware sau lub npe ntawm firmware file koj xav thauj mus rau hauv lub maub los thiab nyem rau ntawm lub pob hloov tshiab firmware.

Nco tseg: Yog hais tias qhov input teb raug tso tseg qhov tseeb firmware file yog xaiv los ntawm lub neej ntawd.

Configuring MQTT

Lub MICROSENS Smart I/O Controller ua raws li tus neeg siv khoom MQTT xa thiab tau txais MQTT cov lus los ntawm thiab mus rau MQTT tus broker hauv lub network, hais txog tus tswj lub tswv yim thiab tso tawm qhov chaw nres nkoj. Qhov no yog qhov tseem ceeb yog tias koj xav siv Smart I / O Controller hauv automation tej yaam num nrog kev sib cuam tshuam ntawm cov khoom siv teb.

Yam yuavtsum tau kawm uantej

Tus maub los ib txwm ua haujlwm nrog IPV6 Txuas-Local Chaw Nyob. Yog li, MQTT tus broker yuav tsum tau ua haujlwm nrog IPv6 chaw nyob. Txawm li cas los xij, nws tuaj yeem txhais tau yooj yim ntawm IPv4 thiab IPv6 vim yog kev tsim qauv ntawm MQTT.

MQTT raws tu qauv ua rau muaj ntau yam ntawm cov khoom siv sib txawv ua tus broker, tshaj tawm thiab cov neeg siv khoom ntawm OSI thauj txheej. Cov cuab yeej sib txuas lus tsuas yog los ntawm TCP chaw nres nkoj 1883 lossis - yog tias hloov kho - dhau Websockets ntawm Chaw nres nkoj 9001 rau kev sib txuas lus sab nraud.

Siv Smart Config Tool rau MQTT Configuration

Nco tseg: Siv MICROSENS Smart Config Tool rau MQTT teeb tsa ntawm Smart I/O Controller. Daim ntawv thov muaj rau rub tawm ntawm MICROSENS webqhov chaw (www.microsens.com). Yog li ntawd, mus rau tus maub los cov khoom nplooj ntawv, nqes mus rau qhov chaw ruaj ntseg download, thiab nkag mus nrog koj daim ntawv pov thawj. Yog tias koj tseem tsis tau sau npe, nyem rau ntawm "Tsis sau npe?" thov rau cov ntaub ntawv nkag.
Txhawm rau teeb tsa MQTT teeb tsa raws li hauv qab no:

1. Pib lub Smart Config Tool.
Nco tseg: Nov yog Microsoft® Windows® daim ntawv thov portable uas ua haujlwm yam tsis muaj kev teeb tsa. Yog xav paub ntxiv txog kev siv Smart Config Tool thov mus saib hauv daim ntawv thov kev pab ua haujlwm ntawm cov lus qhia khawm ntawm sab xis sab xis.
2. Ntaus lub khawm Scan nyob rau sab laug-tes pane.

• Cov xwm txheej kev sib txuas: Qhia cov xwm txheej txuas mus rau MQTT broker (nyeem nkaus xwb).
•  Disconnected: Tsis muaj kev txuas mus rau MQTT broker hauv lub network.
•  Txais: Tus Ntse I/O Controller txuas nrog MQTT broker.
•  Sijhawm: Kev sib txuas rau MQTT tus broker raug kaw vim lub sijhawm sijhawm.
•  tsis kam lees raws txoj cai: MQTT tus broker tsis kam txais kev sib txuas vim yog qhov tsis raug lossis tsis paub MQTT raws tu qauv.
•  tsis kam lees ID: Tus MQTT broker tsis kam sib txuas vim yog tus neeg siv tsis raug ID.
•  tsis kam server: Qhov kev pabcuam MQTT tsis muaj.
•  tsis kam lees paub qhov tseeb: MQTT tus broker tsis kam lees qhov kev sib txuas vim tsis muaj ntaub ntawv pov thawj tus neeg siv khoom tsis raug
•  tsis kam tso cai: Tus neeg siv khoom tsis muaj txoj cai nkag mus tau zoo.
•  tsis paub: Qhov kev sib txuas raug kaw vim tsis paub yog vim li cas.
•  Kev sib txuas: Lub Ntse I/O Controller txuas nrog MQTT tus broker.
•  paused: Kev sib txuas yog nres. Client ID: Tus neeg siv ID uas tau tsim los ntawm ib feem ntawm MAC-Adress uas tau pom nyob rau hauv tab Ntaus (nyeem nkaus xwb).
•  Hom: Txiav txim siab MQTT hom (nyeem/sau). Disabled: MQTT neeg xiam. QoS 0 (feem ntau ib zaug):

1. tsis muaj guarantee rau kev xa xov
2.  tsis muaj kev lees paub ntawm tau txais cov lus los ntawm MQTT broker
3.  tsis khaws cia lossis rov xa cov lus los ntawm MQTT tus tshaj tawm
4.  Packet ID cia li teem rau "0"

• o QoS 1 (tsawg kawg ib zaug):
• lav rau xa cov lus ua tiav tsawg kawg ib zaug rau tus broker
•  khaws cia thiab rov xa cov lus tshwj tsis yog kev lees paub los ntawm tus broker
•  Kev lees paub muaj cov ntawv tshwj xeeb ID nkaus xwb, yog li tus tshaj tawm tuaj yeem xa cov lus thiab kev lees paub o QoS 2 (ib zaug ib zaug):
•  lav rau xa txhua cov lus raws nraim ib zaug rau tus broker
•  tus tshaj tawm thiab tus broker siv plaub feem sib tuav tes rau kev xa thiab lees paub
•  Cov lus lees paub ntawm tus tshaj tawm thiab tus broker muaj cov pob ntawv ID tsuas yog xa cov lus thiab kev lees paub

1.  Broker: Teem IPv6 chaw nyob ntawm MQTT broker (nyeem / sau).
2.  Tus neeg siv lub npe: Username for MQTT broker access (nyeem/sau).
3.  Password: Password rau MQTT broker nkag (sau).
4.  Sai li sai tau Raws li qhov tsis raug cai rau tus broker IPv6 chaw nyob, daim ntawv pov thawj, thiab MQTT hom tau teeb tsa thiab tus broker tuaj yeem ncav cuag, MQTT tus broker kev sib txuas cov xwm txheej hloov mus rau "tau txais".
5.  Keepalive: Teem lub ncua sij hawm nyob rau hauv vib nas this nyob rau hauv uas tus maub los xa lus mus rau nws MQTT broker (nyeem/sau) tshaj tawm nws tus kheej raws li ib tug tam sim no. Qhov no tiv thaiv kom tsis txhob cuam tshuam los ntawm tus broker.
6.  Khaws: Tus chij no txiav txim siab seb tus broker yuav khaws cov lus no li qhov kawg siv tau sample rau lub ncauj lus tshwj xeeb no. Nyob rau hauv rooj plaub tus neeg siv MQTT tshiab sau npe rau lub ncauj lus no tus broker xa cov lus no rau tus neeg siv khoom.
7.  Ntsiab Lus Prefix: MQTT cov ncauj lus yuav ib txwm pib nrog cov hlua no ua tus cim (nyeem/sau).
8.  Yuav Ntsiab Lus: Qhov "lub ntsiab lus kawg" no yog xa mus rau MQTT tus broker ntawm txhua qhov kev sib txuas thawj zaug lossis ntawm kev hloov pauv. Tus broker xa nws mus rau cov neeg siv khoom yog tias tus tswj hwm (raws li tus tshaj tawm) poob qhov kev sib txuas rau tus broker qhia txog kev sib txuas tsis ua haujlwm (nyeem / sau).
9.  Yuav Message: Teem cov lus rau lub ntsiab lus kawg yog tias tsis muaj kev sib txuas (nyeem / sau).
10.  Yuav QoS: Teem MQTT hom rau lub ntsiab lus kawg (nyeem / sau).o Cov chaw sib raug rau MQTT hom teeb tsa saum toj no. Nws raug pom zoo kom siv QoS qib siab dua rau cov ntsiab lus kawg.
11.  Yuav khaws: Yog tias teeb tsa tus broker txuag qhov kawg yuav xa lus ceeb toom rau cov neeg siv khoom tshiab txog tus tswj tau poob nws qhov kev sib txuas yav dhau los (nyeem / sau).
12.  Plub sijhawm ua haujlwm: Teem lub ncua sij hawm nyob rau hauv vib nas this uas tus maub los xa nws uptime rau tus broker siv lub ntsiab lus " /uptime" (nyeem / sau). o Teem qhov parameter no rau "0" disables no function.

Siv MQTT Cov Ntsiab Lus nrog MICROSENS Hloov

Ib lub ntsiab lus tuaj yeem nkag siab raws li qeb ntawm cov lus. Cov ncauj lus tau teeb tsa hierarchically (nrog rau pem hauv ntej slash raws li tus delimiter ntawm qib), piv rau ib file system qauv (xws li "Lub Tsev / Floor1 / Room1 / CeilingLight").
Cov ntsiab lus yog txhais los ntawm tus neeg siv, qhov twg tus neeg siv-phooj ywg tus kheej piav qhia lub npe lub rooj sib tham tsom iav rau Smart Building infrastructure. Cov npe cov npe yog cov ntaub ntawv rhiab heev (“…/CeilingLight” txawv ntawm “…/ceiling light”) thiab yuav tsum muaj tsawg kawg yog ib tus cim. Nco tseg: Nws tuaj yeem siv txhua tus cim UTF-8 (dua li "$" vim tias tus cwj pwm no tau siv los ntawm tus broker rau kev txheeb cais sab hauv).
Kev siv cov ntawv hauv qab no tuaj yeem ua tau:

Example: "Lub Tsev / Floor1 / + / Kub"
Lub ntsiab lus no hais txog "Tsuas Kub" cov lus cuam tshuam rau txhua chav ntawm "Floor1". #: Tus cwj pwm no hloov ntau qib hauv ib lub ncauj lus. Example: “Building/Floor1/#”
Cov ncauj lus no hais txog txhua cov lus tshwm sim ntawm "Plaub 1".

Nco tseg: Kev siv wildcards raug tso cai thaum siv cov ntawv micro sau npe cov ntsiab lus. Nws tsis raug tso cai siv MQTT daim duab qhia lub rooj thiab sib piv ntau cov ncauj lus kom tsuas yog ib qho kev tivthaiv tsis tsim nyog (xws li kev sib piv lub sensor rau ib lub ntsiab lus uas muaj ntau chav). Txhawm rau teeb tsa cov ncauj lus lossis IDs yooj yim dua nws tuaj yeem siv cov kev hloov pauv tshwj xeeb. Cov kev hloov pauv hauv qab no nrog lawv cov nqi sib txawv yog muaj:

•  {SMO}: taag ntawv “SmartOffice”
•  {MFG}: lub npe ruaj khov (piv txwv li "MICROSENS")
•  {MAC}: MAC chaw nyob ntawm lub cuab yeej
• (Device.factory.device_mac, e.g. “00:60:A7:09:37:4E”)
•  {IP4}: IPv4 chaw nyob ntawm lub cuab yeej no
• (Device.ip.v4_status.dynamic_device_ip, eg “10.100.89.187”)
•  {IP6}: IPv6 chaw nyob ntawm lub cuab yeej no
• (yog tias enabled, Device.ip.v6_status.ip, eg “fe80::260:a7ff:fe09:374e/64”)
•  {DMN}: Lub npe ntawm Smart Office network
• (Device.smartoffice.director_config.domain_name, xws li “domain1”)
•  {ART}: tshooj xov tooj ntawm cov cuab yeej no
• (Device.factory.article_number, xws li “MS652119PM”)
•  {SER}: serial tooj ntawm cov cuab yeej no
• (Device.factory.serial_number, xws li “00345860”)
•  {LOC}: SNMP SysLocation
• (Management.snmp.device_info.sys_location, xws li “Office”)
•  {NAM}: SNMP SysName
• (Management.SNMP.device_info.sys_name, eg “MICROSENS G6 Micro Switch”)

Cov kev sib txawv tuaj yeem ua ke xws li hauv cov ncauj lus xws li “{SMO}/{MFG}_{MAC}/”.
Nco tseg: Cov kev hloov pauv no tau txwv rau kev siv nrog MICROSENS G6 keyboards (piv txwv li, rau micro scripts). Lawv siv tsis tau xws li nrog MQTT cov ntsiab lus ntawm Smart I/O Controller.

Cov ntaub ntawv / Cov ntaub ntawv

	MICROSENS Ntse IO Controller muab cov khoom sib xyaw ua ke rau hauv IP Network [ua pdf] Cov neeg siv phau ntawv qhia Smart IO Controller Integrate Cov Cheebtsam Rau Hauv IP Network, Ntse IO, Tus Tswj Xyuas Kev Sib Txuas Cov Ntsiab Lus rau hauv IP Network
	MICROSENS Ntse IO Controller muab cov khoom sib xyaw ua ke rau hauv IP Network [ua pdf] Cov neeg siv phau ntawv qhia Ntse IO Controller Integrate Cov Cheebtsam rau hauv IP Network

Cov ntaub ntawv

• Cov neeg siv phau ntawv