MICROCHIP V43 Resolver Interface
Folasaga (Fai se Fesili)
O le fofo o se fa'amautu tu'u po'o se transducer e fuaina ai le tulaga fa'amaufa'ato'aga o le 'a'ai feliuliua'i o lo'o fa'apipi'i i ai.
O le ta'iala fa'atino a se fofo e tutusa ma le fa'aogaina o le synchro. Resolvers e masani ona fausia e pei o afi laiti ma se rotor (faʻapipiʻi i le uʻamea o lona tulaga e tatau ona fuaina) ma se stator (vaega tumau) lea e ave faʻailoga faʻamalosi ma maua ai faʻailoga o galuega. O se fofo e masani lava ona aofia ai le viliina muamua, e ta'ua foi o le viliina o le fiafia ma le lua vili lona lua e ta'ua o le cosine ma le sine. O fa'ailoga lona lua o lo'o fa'atulagaina fa'atusa e fa'apea o fa'ailo fa'ailo o le cosine ma le fa'agaioia o le pito o le rotor.
O le ata o lo'o i lalo o lo'o fa'aalia ai fa'ailo na fa'atupuina e le tagata fo'i.
Ata 1. Fa'atupuina Fa'ailoga i Resolver
Aotelega (Fai se Fesili)
| Autu Version | O lenei pepa e fa'atatau ile Resolver Interface v4.3. |
| Aiga Meafaigaluega Lagolago |
|
| Lagolago Meafaigaluega tafe | Manaomia Libero® SoC v11.8 poʻo faʻasalalauga mulimuli ane. |
| Laisene | O loʻo tuʻuina atu le faʻailoga faʻailoga RTL atoa mo le autu, e mafai ai ona faʻapipiʻi le autu ma SmartDesign. Simulation, Synthesis, ma le Layout e mafai ona faia i le polokalama Libero. O feso'ota'iga fo'i ua laiseneina ile fa'ailoga RTL e tatau ona fa'atau fa'atasi. Mo nisi fa'amatalaga, va'ai Resolver Interface. |
Avanoa (Fai se Fesili)
Resolver Interface ei ai vaega taua nei:
- Tuuina atu se faailo maualuga-televave mo le fiafia
- Fa'aleaogaina mea e fa'amalo ai le sine ma le cosine
- Fa'atatau le tulimanu ma le saoasaoa
Fa'atinoina o le IP Core i Libero® Design Suite (Fai se Fesili)
O le IP autu e tatau ona faʻapipiʻi i le IP Catalog o le Libero SoC software. O lenei mea e faʻapipiʻiina otometi e ala i le IP Catalog update function i le Libero SoC software, poʻo le IP core e mafai ona sii mai ma le lima mai le lisi.
O le taimi lava e faʻapipiʻi ai le IP core i le Libero SoC software IP Catalog, o le autu e mafai ona faʻapipiʻiina, faʻatupuina, ma faʻapipiʻiina i totonu o le meafaigaluega Smart Design mo le faʻaofiina i le lisi o poloketi Libero.
Fa'aaogāina ma Fa'atinoga o Meafaigaluega (Fai se Fesili)
Ole laulau o lo'o i lalo o lo'o lisiina ai le fa'aogaina o masini na fa'aogaina mo Resolver interface.
Fuafuaga 1. Fa'aogaina o Feso'ota'iga
| Fa'amatalaga Fa'atonu | Punaoa | Fa'atinoga (MHz) | RAMs | Math Blocks | Chip Globals | |||
| Aiga | Meafaigaluega | LUTs | DFF | LSRAM | μSRAM | |||
| PolarFire® SoC | MPFS250T | 1815 | 909 | 200 | 0 | 0 | 2 | 0 |
| PolarAfi | MPF300T | 1815 | 909 | 200 | 0 | 0 | 2 | 0 |
| SmartFusion® 2 | M2S150 | 1832 | 914 | 175 | 0 | 0 | 2 | 0 |
Taua:
- O fa'amaumauga i lenei laulau o lo'o pu'eina i le fa'aogaina o fa'asologa masani ma fa'atulagaina. CDR reference clocksource na seti i Dedicated fa'atasi ai ma isi tulaga fa'aopoopo e le'i suia.
- O le uati e faʻatapulaʻaina i le 200 MHz aʻo faʻatautaia le suʻesuʻega taimi e ausia ai numera faʻatinoga.
Fa'amatalaga Fa'atino (Fai se Fesili)
O le ata o loʻo i lalo o loʻo faʻaalia ai le poloka poloka o fesoʻotaʻiga Resolver.
Ata 1-1. Fa'asologa o Polokalama Tulaga Fa'atonu o Fa'amatalaga Fa'asagaga
Ole feso'ota'iga IP e fa'atupuina ai se galu sikuea e fafaga i le ta'amilosaga muamua a le fa'ai'uga. Ole taimi ole galu sikuea e mafai ona fa'atulagaina e ala ile hf_sig_period_i input. O fa'ailo cos_i ma sin_i mai ta'amilosaga lona lua e fa'amama ma fa'amama ina ia maua ai fa'ailo lelei o le cosine ma le sine. O le Fa'asaga-Locked Loop (PLL) e fa'aaogaina e fa'ailoa mai ai le tulimanu ma le saoasaoa mai fa'ailoga cosine ma sine.
E fa'aoga e le PLL se PI controller e mafai ona fa'alogoina ana tupe maua pll_pi_kp_i ma pll_pi_ki_i e maua ai le taimi e mana'omia ai le tali. O le maualuga maualuga o tupe maua e maua ai le vave tali atu i suiga o le tulimanu ma le saoasaoa ae mafai foi ona faʻaosoina le pisapisao i le tulimanu ma le saoasaoa gaioiga.
I le fa'aogaina o le fa'atonuga o afi, e tatau ona fa'afetaui le tulaga e leai se fa'ai'uga ma le tulaga e leai se maneta. Ina ia ausia lenei mea, o loʻo faʻaaogaina se faailo calib_angle_i. I le faagasologa o le faʻavasegaina, e maualuga le faailo ma faʻamalosia le afi e faʻaoga lona rotor i le tulaga zero magnetic. O le fua fa'ailo e toe fa'afo'i ile zero ile vaitaimi lea ma e fa'atatau mo le fuaina o le tulimanu sa'o. O le afi ma le fofo e mafai ona i ai ni pa'aga se tele lea e mana'omia ai e le afi fa'atonu algorithm le tele o suiga ole theta (3600) mo le tasi fa'ainisinia o le rotor. O lenei vaega e mafai ona fa'atulagaina e ala i le pp_ratio_i uafu, o lo'o lisiina ile Laulau 2-2.
Ole theta_factor constant e fa'atatau ile fa'aogaina ole fa'atusa lea. Ole saoasaoa fa'atatau e mafai ona fua ile iunite ile fa'aoga oleta_factor_i.
EQ1
Ole fa'aoga o le hf_sig_period e iloa ai le tele ole galu fa'afafa'ato'a tu'iina ile fa'aulu fo'i, fa'atatau ile fa'aogaina ole fa'atusa lea.
EQ2
o fea,
hf_freq = Fa'asao o le galu sikuea tui i totonu o le fofo muamua fsys_clk = Fa'asao o le uati fa'aoga ua tu'uina i totonu sys_clk_i
Fa'ata'otoga Fa'asagaga ma Fa'ailoga Fa'asinoala (Fa'ai se Fesili)
O lenei vaega o loʻo talanoaina ai faʻamaufaʻailoga i le Resolver interface GUI configurator ma faʻailoga I / O.
Fa'atonuga ole GUI Parameters (Fai se Fesili)
O le laulau o loʻo i lalo o loʻo lisiina ai le faʻamatalaga o le faʻasologa o le faʻaogaina o loʻo faʻaaogaina i le faʻaogaina o meafaigaluega a le Resolver interface. O fa'asologa lautele ia ma e mafai ona fesuia'i e tusa ai ma le mana'oga o le talosaga.
Laulau 2-1. Fa'atutuga Parata
| Igoa Faailoga | Fa'amatalaga |
| g_NO_MCYCLE_PATH | Ole numera ole fa'atuai ole uati e mana'omia a'o le'i fa'ailoaina le fa'ailoga ua saunia o oloa fa'atele. |
Fa'ailoga Fa'aulu ma Fa'ailoga (Fai se Fesili)
O le laulau o lo'o i lalo o lo'o lisiina ai ports o lo'o tu'uina atu ma fa'aulufalega o feso'ota'iga Resolver.
Laulau 2-2. Ulufale ma Fa'aulufalega o Fa'asagaga o Resolver
| Igoa Faailoga | Fa'atonuga | Fa'amatalaga | |
| reset_i | Ulufale | Fa'ailoilo toe setiina maualalo asynchronous i le mamanu | |
| sys_clk_i | Ulufale | Uati System | |
| clear_buffer_i | Ulufale | Pe a seti i le 1, e kilia le fa'amama saosaoa i totonu Pe a seti i le 0, e masani lava ona fa'aogaina le pa | |
| calib_angle_i | Ulufale | O le IP e ulufale atu i le tulaga faʻavasega pe a maualuga lenei faailo. O le fa'a'ese'ese fa'aitu i le va o le zero solver ma le afi maneta zero e fa'atatau i lenei setete. | |
| direction_config_i | Ulufale | Fa'ailoa mai le itu o le ta'amilosaga afi | |
| pp_ratio_i | Ulufale | O le fua faatatau o le numera o pou afi i le numera o pou e fa'amalieina o lo'o fa'aalia o le fa'asologa o le 2. Example mo pou afi 16, pou fo'i 2, pp_ratio_i = 3; Mo pou afi 8, pou fo'i 2, pp_ratio_i= 2; Mo pou afi 4, pou fo'i 4,
pp_ratio_i = 0. |
|
| cos_i | Ulufale | Cosine fa'aulu fa'aoga (mai le ADC) | |
| agasala_i | Ulufale | Fa'aulu fa'a'au'ai (mai le ADC) | |
| pll_pi_kp_i | Ulufale | Fa'afuafua tupe maua a le PI pule fa'aaoga mo PLL | |
| pll_pi_ki_i | Ulufale | Fa'asoa fa'atasi a le fa'atonu PI fa'aaogaina mo le PLL | |
| dc_filter_factor | Ulufale | Fa'amama taimi fa'asolo ole fa'amama pasi maualuga e fa'aaoga e aveese ai le tau DC mai fa'ailoga Sine ma Cosine | |
| ac_filter_factor | Ulufale | Taimi fa'amama fa'asolo ole fa'amama maualalo e fa'aaogaina e fa'ate'aina ai vaega ole fa'asolo ole galu mo fa'ailoga Sine ma Cosine | |
| theta_factor_i | Ulufale | Theta factor tumau, e pei ona fuafuaina mai EQ1 | |
| hf_sig_period_i | Ulufale | O le afa o le tau ole taimi ole galu sikuea maualuga, e pei ona fuafuaina mai
EQ2 |
|
| hf_signal_o | Tuuina atu | Fa'ailoga o galu sikuea fa'aaoga e fa'aoso ai le ta'amilosaga muamua ole fofo | |
| theta_o | Tuuina atu | Fa'ailo fa'ai'uga o fofo; e tutusa ma le tulimanu eletise afi | |
| saoasaoa_o | Tuuina atu | Saosaoa le gaosiga o le fofo IP | |
Ata o Taimi (Fai se Fesili)
O lenei vaega o lo'o fa'atalanoaina ai le fa'asologa o taimi o feso'ota'iga Resolver.
O le ata o loʻo i lalo o loʻo faʻaalia ai le ata o le taimi o le Resolver interface.
Ata 3-1. Resolver Interface Taimi Ata
Testbench (Fai se Fesili)
O se su'ega tu'ufa'atasi e fa'aoga e fa'amaonia ma fa'ata'ita'i le feso'ota'iga Resolver e ta'ua o le user testbench. Ua tuʻuina atu le Testbench e siaki ai le gaioiga o le Resolver interface IP.
Fa'ata'ita'iga (Fai se Fesili)
O laasaga nei o loʻo faʻamatalaina pe faʻafefea ona faʻataʻitaʻiina le autu e faʻaaoga ai le testbench:
- Tatala Libero SoC Catalog tab, faʻalautele Solutions-Motor Control, faʻalua kiliki Resolver Interface, ona kiliki lea OK. O faʻamaumauga e fesoʻotaʻi ma le IP o loʻo lisiina i lalo o Faʻamaumauga.
Taua: Afai e te le va'ai i le Catalog tab, fa'afeiloa'i i View > Windows menu ma kiliki Catalog e fa'aalia.
Ata 4-1. Resolver Interface IP Core i Libero SoC Catalog
- I luga o le Stimulus Hierarchy tab, filifili le testbench (resolver_interface_tb.v), kiliki i luga ona kiliki lea Simulate Pre-Synth Design > Open Interactively.
Taua: Afai e te le vaʻai i le Stimulus Hierarchy tab, faʻafeiloaʻi i View > Windows menu ma kiliki Stimulus Hierarchy e fa'aalia.
Ata 4-2. Fa'ata'ita'i Fuafuaga Fa'amua'i Fa'asologa
ModelSim tatala i le suʻega suʻega file, e pei ona faaalia i le ata o loo i lalo.
Ata 4-3. ModelSim Faʻamalama Faʻamalama
Taua: Afai ua fa'alavelaveina le fa'ata'ita'iga ona o le fa'atapula'aina o le ta'aloga ua fa'amaoti mai i le .do file, faʻaaoga le taʻavale -all command e faʻamaeʻa ai le faʻataʻitaʻiga.
Toe Iloilo Tala'aga (Fai se Fesili)
O le tala fa'asolopito o lo'o fa'amatalaina suiga na fa'atinoina i le pepa. O suiga o lo'o lisiina e ala i toe iloiloga, amata i le lomiga aupito lata mai.
Laulau 5-1. Toe Iloilo Tala'aga
| Toe Iloiloga | Aso | Fa'amatalaga |
| A | 03/2023 | Ole lisi lea o suiga o lo'o faia ile toe iloiloga A ole pepa:
|
| 4.0 | — | O lo'o i lalo le aotelega o suiga na faia i le toe iloiloga 4.0 o lenei pepa
|
| 3.0 | — | O lo'o i lalo le aotelega o suiga na faia i le toe iloiloga 3.0 o lenei pepa
|
| 2.0 | 01/2017 | O lo'o i lalo le aotelega o suiga na faia i le toe iloiloga 2.0 o lenei pepa.
|
| 1.0 | 11/2016 | Toefuataiga 1.0 o le lomiga muamua lea o lenei pepa. |
Microchip FPGA Lagolago (Fai se Fesili)
Microchip FPGA products group backs its products with various support services, including Customer Service, Customer Technical Support Center, a webnofoaga, ma ofisa faatau i le lalolagi atoa. E fautuaina tagata fa'atau e asiasi i Microchip i luga ole laiga a'o le'i fa'afeso'ota'i le lagolago ona e foliga mai ua uma ona tali a latou fesili.
Fa'afeso'ota'i le Nofoaga Autu Lagolago Fa'apitoa e ala ile webnofoaga i www.microchip.com/support. Ta'u le numera o le Vaega o Meafaigaluega FPGA, filifili le vaega o mataupu talafeagai, ma fa'apipi'i le mamanu files a'o faia se mataupu lagolago fa'apitoa.
Fa'afeso'ota'i Auaunaga Fa'atau mo le lagolago o oloa e le fa'apitoa, e pei o le tau o oloa, fa'aleleia o oloa, fa'afouga fa'amatalaga, tulaga oka, ma le fa'atagaina.
- Mai Amerika i Matu, valaau 800.262.1060
- Mai le lalolagi atoa, valaau 650.318.4460
- Fax, mai so'o se mea i le lalolagi, 650.318.8044
Microchip Faamatalaga (Fai se Fesili)
Le Microchip Webnofoaga (Fai se Fesili)
Microchip e maua le lagolago i luga ole laiga e ala i la matou webnofoaga ile www.microchip.com/. Lenei web'upega tafa'ilagi e fa'aoga e fai ai files ma fa'amatalaga faigofie ona maua e tagata fa'atau. O nisi o mea e maua e aofia ai:
- Lagolago oloa - Pepa faʻamatalaga ma mea sese, faʻamatalaga talosaga ma samppolokalame, punaoa mamanu, ta'iala a le tagata fa'aoga ma pepa lagolago mo meafaigaluega, fa'asalalauga fou fa'akomepiuta ma polokalama fa'amaumauga
- Lagolago Faʻatekinisi Lautele - Fesili e masani ona fesiligia (FAQs), talosaga lagolago faʻapitoa, faʻasalalauga i luga ole laiga, Microchip design partner programme list
- Pisinisi o Microchip - Faʻatau oloa ma taʻiala faʻatonu, faʻasalalauga lata mai a Microchip, lisi o semina ma mea na tutupu, lisi o ofisa faʻatau Microchip, tufatufaina ma sui fale gaosimea
Au'aunaga Fa'asilasilaga Suiga Oloa (Fa'ai se Fesili)
O le auaunaga fa'asilasilaga suiga o oloa a Microchip e fesoasoani e fa'amautu ai tagata fa'atau i oloa Microchip. O le a maua e le au fai saofaga le faʻamatalaga imeli i soʻo se taimi e iai suiga, faʻafouga, toe teuteuga poʻo mea sese e fesoʻotaʻi ma se aiga o oloa faʻapitoa poʻo meafaigaluega atinaʻe e fiafia i ai.
Ina ia lesitala, alu i www.microchip.com/pcn ma mulimuli i faatonuga o le resitalaina.
Faiga Fa'asinoala Puipuia o Fa'atonu a Microchip (Fa'ai se Fesili)
Manatua faʻamatalaga o loʻo i lalo o le faʻaogaina o le puipuiga o tulafono i luga o oloa Microchip:
- O oloa Microchip e fetaui ma faʻamatalaga o loʻo i totonu o la latou Pepa Faʻamatalaga Microchip.
- E talitonu Microchip o lona aiga o oloa e saogalemu pe a faʻaaogaina i le auala faʻamoemoeina, i totonu o faʻamatalaga faʻaogaina, ma i lalo o tulaga masani.
- Microchip fa'atauaina ma puipuia fa'amalosi ana aia tatau tau meatotino. O taumafaiga e soli le tulafono o le puipuiga o le oloa Microchip e matua fa'asaina ma e ono solia ai le Digital Millennium Copyright Act.
- E le mafai e le Microchip poʻo se isi mea gaosi semiconductor ona faʻamaonia le saogalemu o lana tulafono. O le puipuiga o tulafono laiti e le o lona uiga tatou te faʻamautinoa o le oloa e "le mafai ona motusia". O le puipuiga o tulafono laiti o lo'o fa'asolosolo pea. Microchip ua tuuto atu i le faʻaauauina pea o le faʻaleleia atili o uiga puipuia o tulafono a tatou oloa.
Faasilasilaga Faaletulafono (Fai se Fesili)
O lenei lomiga ma faʻamatalaga o loʻo i totonu e mafai ona faʻaaogaina i oloa Microchip, e aofia ai le mamanu, suʻega, ma tuʻufaʻatasia oloa Microchip ma lau talosaga. O le fa'aogaina o nei fa'amatalaga i so'o se isi lava faiga e solia ai nei aiaiga. O fa'amatalaga e uiga i le fa'aogaina o masini e tu'uina atu mo na'o lou fa'amalieina ma e ono suia i fa'afouga. O lau matafaioi le faʻamautinoa o lau talosaga e fetaui ma au faʻamatalaga. Fa'afeso'ota'i lou ofisa fa'atau Microchip i le lotoifale mo se lagolago fa'aopoopo pe, maua se lagolago fa'aopoopo ile www.microchip.com/en-us/support/design-help/client-support-services.
O LENEI FAʻAMATALAGA E TUUINA E MICROCHIP "AS IS". E LEAI FAIA e le MICROCHIP ni sui po'o se fa'amaoniga o so'o se ituaiga pe fa'aalia pe fa'aali, tusia pe tugutu, tulāfono po'o se isi mea, e feso'ota'i ma fa'amatalaga e aofia ai ae le tapula'a i so'o se fa'amaoniaga fa'amaonia, fa'amaonia, ma le fa'amaoniaina. FAAMOEMOEGA, POO WARRANTY E FAI I ONA TULAGA, TULAGA, POO LE FAIGALUEGA.
E LEAI SE MEA E TATAU AI MICROCHIP MO SO'O SE FA'AMATALAGA, FA'AMATALAGA, FA'ASA'OGA, FA'AMATALAGA, PO'O LE FA'A'ALI'AGA MA'U'U, FA'AFIA, TAU, PO'O LE TU'U'UINA O SO'O SE I'UGA SO'O SE FA'AIGA I LE FA'AMATALAGA POO LONA FA'A'OGA, PE'O LE MEA NA FA'AUPUNA'I, E tusa lava pe fa'aletonu. FA'ATONU POO LE FA'AFIA E FA'AVAEINA. I LE AGATOGA FA'AALIGA E LE TULAFONO, O LE UMA AOFA'IGA A MICROCHIP I TOTOGI UMA I SO'O SE AUALA E FA'AIGA I LE FA'AMATALAGA POO LONA FA'A'OGA E LE'A LOLOA I LE TOTOGI O TOTOGI, AFAI E IAI, NA E TOTOGI SA'O I LE MICROCHIP MO LE FA'AMATALAGA.
O le fa'aogaina o masini Microchip i le tausiga o le ola ma/po'o le saogalemu o lo'o i le tulaga lamatia o le tagata fa'atau, ma e malie le tagata fa'atau e puipuia, fa'aleaga ma taofia Microchip le afaina mai so'o se mea leaga, tagi, suti, po'o tupe alu e mafua mai i lea fa'aoga. E leai ni laisene e tu'uina atu, fa'aalia po'o se isi mea, i lalo o so'o se Microchip aia tatau tau le atamai se'i vagana ua ta'ua.
Fa'ailoga (Fai se Fesili)
Le igoa Microchip ma le logo, le Microchip logo, Adaptec, AVR, AVR logo, AVR Freaks, BesTime, BitCloud, CryptoMemory, CryptoRF, dsPIC, flex PWR, HELDO, IGLOO, JukeBlox, KeeLoq, Kleer, LANCheck, LinkMD, maXStylus, maXTouch , MediaLB, megaAVR, Microsemi, Microsemi logo, MOST, MOST logo, MPLAB, OptoLyzer, PIC, picoPower, PICSTART, PIC32 logo, PolarFire, Prochip Designer, QTouch, SAM-BA, SenGenuity, SpyNIC, SST, SST Logo, SuperFlash, Symmetricom, SyncServer, Tachyon, TimeSource, tinyAVR, UNI/O, Vectron, ma XMEGA o fa'ailoga fa'amaufa'ailoga a Microchip Technology Incorporated i Amerika ma isi atunu'u.
AgileSwitch, APT, ClockWorks, The Embedded Control Solutions Company, Ether Synch, Flashtec, Hyper Speed Control, Hyper Light Load, Libero, motorBench, mTouch, Powermite 3, Precision Edge, ProASIC, ProASIC Plus, ProASIC Plus logo, Quiet-Wire, SmartFusion, SyncWorld, Temux, TimeCesium, TimeHub, TimePictra, TimeProvider, TrueTime, ma ZL o faʻailoga resitalaina o Microchip Technology Incorporated i Amerika.
Taofi Fa'aigoa Fa'atasi, AKS, Analog-mo-le-Digital Age, So'o se Capacitor, So'o se In, So'o'Out, Fa'ateleina Suiga, BlueSky, BodyCom, Clockstudio, CodeGuard, CryptoAuthentication, Crypto Automotive, Crypto Companion, Crypto Pule, dsPICDEM, dsPICDEM.net, Fa'atusa Fa'atatau, DAM, ECAN, Espresso T1S, Eteru GREEN, Taimi Grid, Alalaupapa Lelei, Polokalama Fa'asologa Fa'asologa, ICSP, INICnet, Fa'ata'ita'i Fa'atusa, Intel limos, Feso'ota'i va'aiga, Jitter Blocker, Knob-on-Display, KoD, max Crypto, maxView, memBrain, Mindi, MiWi, MPASM, MPF, MPLAB Faʻamaonia logo, MPLIB, MPLINK, MultiTRAK, NetDetach, Omniscient Code Generation, PICDEM, PICDEM.net, PICkit, PICtail, PowerSmart, Pure Silicon, QMatrix, REAL ICE, Ripple Blocker, RTAX, RTG4, SAM-
ICE, Serial Quad I/O, simpleMAP, SimpliPHY, Smart Buffer, Smart HLS, SMART-IS, storClad, SQI, SuperSwitcher, SuperSwitcher II, Switchtec, SynchroPHY, Aofa'i Tumau, Taimi Fa'alagolago, TSHARC, USBCheck, VariSense, VectorBlox, VeriPHY , ViewSpan, WiperLock, XpressConnect, ma ZENA o fa'ailoga fa'ailoga a Microchip Technology Incorporated i Amerika ma isi atunu'u.
SQTP ose fa'ailoga tautua a Microchip Technology Incorporated i Amerika
O le logo Adaptec, Frequency on Demand, Silicon Storage Technology, ma Symmcom o fa'ailoga fa'amaufa'ailoga a Microchip Technology Inc. i isi atunu'u.
GestIC ose fa'ailoga fa'amaufa'ailoga a Microchip Technology Germany II GmbH & Co. KG, ose lala o Microchip Technology Inc., i isi atunu'u.
O isi fa'ailoga tau fefa'ataua'iga uma o lo'o ta'ua ii o meatotino a latou kamupani.
© 2023, Microchip Technology Incorporated ma ona lala. Ua Taofia Aia Tatau Uma.
ISBN: 978-1-6683-2177-5
Faiga Fa'atonuga (Fa'ai se Fesili)
| AMERIKA | ASIA/ PASIFIK | ASIA/ PASIFIK | Europa |
| Ofisa Autasi
2355 Sisifo Chandler Blvd. Chandler, AZ 85224-6199 Telefoni: 480-792-7200 Fax: 480-792-7277 Lagolago Fa'atekinisi: www.microchip.com/support Web tuatusi: www.microchip.com Atlanta Duluth, GA Telefoni: 678-957-9614 Fax: 678-957-1455 Austin, TX Telefoni: 512-257-3370 Boston Westborough, MA Telefoni: 774-760-0087 Fax: 774-760-0088 Chicago Itasca, IL Telefoni: 630-285-0071 Fax: 630-285-0075 Dallas Addison, TX Telefoni: 972-818-7423 Fax: 972-818-2924 Detroit Novi, MI Telefoni: 248-848-4000 Houston, TX Telefoni: 281-894-5983 Indianapolis Noblesville, IN Tel: 317-773-8323 Fax: 317-773-5453 Telefoni: 317-536-2380 Los Angeles Mission Viejo, CA Telefoni: 949-462-9523 Fax: 949-462-9608 Telefoni: 951-273-7800 Raleigh, NC Telefoni: 919-844-7510 Niu Ioka, NY Telefoni: 631-435-6000 San Jose, CA Telefoni: 408-735-9110 Telefoni: 408-436-4270 Kanata - Toronto Telefoni: 905-695-1980 Fax: 905-695-2078 |
Ausetalia – Sini
Telefoni: 61-2-9868-6733 Saina - Beijing Telefoni: 86-10-8569-7000 Saina – Chengdu Telefoni: 86-28-8665-5511 Saina – Chongqing Telefoni: 86-23-8980-9588 Saina – Dongguan Telefoni: 86-769-8702-9880 Saina – Guangzhou Telefoni: 86-20-8755-8029 Saina – Hangzhou Telefoni: 86-571-8792-8115 Saina - Hong Kong SAR Telefoni: 852-2943-5100 Saina – Nanjing Telefoni: 86-25-8473-2460 Saina – Qingdao Telefoni: 86-532-8502-7355 Saina – Shanghai Telefoni: 86-21-3326-8000 Saina – Shenyang Telefoni: 86-24-2334-2829 Saina – Shenzhen Telefoni: 86-755-8864-2200 Saina – Suzhou Telefoni: 86-186-6233-1526 Saina - Wuhan Telefoni: 86-27-5980-5300 Saina – Xian Telefoni: 86-29-8833-7252 Saina – Xiamen Telefoni: 86-592-2388138 Saina – Zhuhai Telefoni: 86-756-3210040 |
Initia – Bangalore
Telefoni: 91-80-3090-4444 Initia – New Delhi Telefoni: 91-11-4160-8631 Initia - Pune Telefoni: 91-20-4121-0141 Iapani - Osaka Telefoni: 81-6-6152-7160 Iapani - Tokyo Telefoni: 81-3-6880-3770 Korea – Daegu Telefoni: 82-53-744-4301 Korea – Seoul Telefoni: 82-2-554-7200 Meleisia – Kuala Lumpur Telefoni: 60-3-7651-7906 Meleisia – Penang Telefoni: 60-4-227-8870 Filipaina – Manila Telefoni: 63-2-634-9065 Singapore Telefoni: 65-6334-8870 Taiuani – Hsin Chu Telefoni: 886-3-577-8366 Taiuani – Kaohsiung Telefoni: 886-7-213-7830 Taiuani – Taipei Telefoni: 886-2-2508-8600 Taialani – Bangkok Telefoni: 66-2-694-1351 Vietnam – Ho Chi Minh Telefoni: 84-28-5448-2100 |
Ausetalia – Uelese
Telefoni: 43-7242-2244-39 Fax: 43-7242-2244-393 Tenimaka – Copenhagen Telefoni: 45-4485-5910 Fax: 45-4485-2829 Finelani – Espoo Telefoni: 358-9-4520-820 Farani – Paris Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79 Siamani – Garching Telefoni: 49-8931-9700 Siamani – Haan Telefoni: 49-2129-3766400 Siamani – Heilbronn Telefoni: 49-7131-72400 Siamani – Karlsruhe Telefoni: 49-721-625370 Siamani – Munich Tel: 49-89-627-144-0 Fax: 49-89-627-144-44 Siamani – Rosenheim Telefoni: 49-8031-354-560 Isaraelu – Ra’anana Telefoni: 972-9-744-7705 Italia – Milan Telefoni: 39-0331-742611 Fax: 39-0331-466781 Italia – Padova Telefoni: 39-049-7625286 Netherlands – Drunen Telefoni: 31-416-690399 Fax: 31-416-690340 Nouei – Trondheim Telefoni: 47-72884388 Polani – Warsaw Telefoni: 48-22-3325737 Romania – Bucharest Tel: 40-21-407-87-50 Sepania - Madrid Tel: 34-91-708-08-90 Fax: 34-91-708-08-91 Suetena – Gothenberg Tel: 46-31-704-60-40 Suetena - Stockholm Telefoni: 46-8-5090-4654 Peretania - Wokingham Telefoni: 44-118-921-5800 Fax: 44-118-921-5820 |
Lagolago Tagata Fa'atau (Fa'ai se Fesili)
O tagata fa'aoga o oloa Microchip e mafai ona maua fesoasoani e ala i le tele o auala:
Fa'asoa po'o le Sui
Ofisa Fa'atauga Fa'alotoifale
Embedded Solutions Engineer (ESE)
Lagolago Fa'atekinisi
E tatau i tagata fa'atau ona fa'afeso'ota'i le latou tufatufaina, sui po'o le ESE mo le lagolago. O lo'o avanoa fo'i ofisa fa'atau i le lotoifale
fesoasoani i tagata fa'atau. O se lisi o ofisa fa'atau ma nofoaga o lo'o aofia i totonu o lenei pepa.
E maua le lagolago fa'apitoa e ala ile webnofoaga i: www.microchip.com/support
Pepa / Punaoa
 |
MICROCHIP V43 Resolver Interface [pdf] Taiala mo Tagata Fa'aoga V43 Fa'afeso'ota'i Va'aiga, V43, Feso'ota'iga Fa'atonu, Feso'ota'iga |