MICROCHIP V43 Resolver Interface
Okwu mmalite (Jụọ ajụjụ)
Onye na-edozi ihe bụ ihe mmetụta ọnọdụ ma ọ bụ transducer nke na-atụ ọnọdụ nkuku zuru oke nke okporo osisi na-atụgharị nke etinyere ya.
Ụkpụrụ ọrụ nke onye na-edozi ihe yiri ụkpụrụ ọrụ nke synchro. A na-ewukarị ndị na-edozi ihe dị ka obere moto nwere rotor (nke a na-ejikọta ya na ogwe aka nke a ga-atụle) na stator (akụkụ ọdụ) nke na-ewe ihe mgbaàmà na-akpali akpali ma na-emepụta akara ngosi. Onye na-edozi ihe na-enwekarị ikuku ikuku, nke a na-akpọkwa winding excitation na windings abụọ a na-akpọ cosine na sine windings. A na-edobe windings nke abụọ na geometrically nke na akara ikuku bụ cosine na sine nke akụkụ rotor.
Ọnụọgụ na-esonụ na-egosi akara ngosi nke onye nrụpụta mepụtara.
Ọgụgụ 1. Ọgbọ mgbaàmà na Resolver
Nchịkọta (Jụọ ajụjụ)
| Ụdị isi | Akwụkwọ a na-emetụta Interface Resolver v4.3. |
| Ezinụlọ Ngwaọrụ akwadoro |
|
| Ngwa Ngwa akwadoro | Chọrọ mwepụta Libero® SoC v11.8 ma ọ bụ emechaa. |
| Inye ikike | A na-enye koodu RTL ezoro ezo zuru ezu maka isi, na-eme ka isi na SmartDesign mee ya ozugbo. Enwere ike iji sọftụwia Libero rụọ simulation, Synthesis, na okirikiri nhọrọ ukwuu. Resolver interface nwere ikikere na RTL ezoro ezo nke a ga-azụrịrị iche. Maka ozi ọzọ, lee Resolver Interface. |
Atụmatụ (Jụọ ajụjụ)
Interface Resolver nwere atụmatụ isi ndị a:
- Na-enye mgbama dị elu maka mkpali
- Na-ewetu ntinye sine na cosine winding
- Na-agbakọ akụkụ na ọsọ
Mmejuputa IP Core na Libero® Design Suite (Jụọ ajụjụ)
A ga-etinyerịrị isi IP na katalọgụ IP nke ngwanrọ Libero SoC. Awụnyere nke a na-akpaghị aka site na ọrụ mmelite IP katalọgụ dị na ngwanrọ Libero SoC, ma ọ bụ enwere ike iji aka budata isi IP na katalọgụ ahụ.
Ozugbo etinyere isi IP na Libero SoC software IP katalọgụ, enwere ike ịhazi isi ya, mepụta na ozugbo n'ime ngwa Smart Design maka itinye na ndepụta ọrụ Libero.
Iji ngwaọrụ na arụ ọrụ (Jụọ ajụjụ)
Tebụlụ na-esote depụtara ngwaọrụ eji eme ihe maka interface Resolver.
Isiokwu 1. Resolver Interface itinye n'ọrụ
| Nkọwa ngwaọrụ | Akụrụngwa | Arụmọrụ (MHz) | RAM | Ihe mgbochi mgbakọ na mwepụ | Chip Globals | |||
| Ezinụlọ | Ngwaọrụ | Ndị LUT | DFF | LSRAM | μSRAM | |||
| PolarFire® SoC | MPFS250T | 1815 | 909 | 200 | 0 | 0 | 2 | 0 |
| PolarFire | MPF300T | 1815 | 909 | 200 | 0 | 0 | 2 | 0 |
| SmartFusion® 2 | M2S150 | 1832 | 914 | 175 | 0 | 0 | 2 | 0 |
Ihe dị mkpa:
- A na-ejide data dị na tebụl a site na iji nhazi nhazi na nhazi nhazi. Edebere isi iyi elekere CDR ka ọ bụrụ Raara onwe ya na ụkpụrụ nhazi ndị ọzọ agbanwebeghị.
- A na-amachibido elekere na 200 MHz ka ọ na-eme nyocha oge iji nweta ọnụọgụ ọrụ.
Nkọwa ọrụ (Jụọ ajụjụ)
Ọnụ ọgụgụ na-esonụ na-egosi eserese ngọngọ nke interface Resolver.
Ọgụgụ 1-1. Eserese-ihe ngbochi sistemụ nke Interface Resolver
Ihe nrụnye IP na-emezi ihe na-emepụta ebili mmiri dị square nke a na-enye nri na ikuku mbụ nke onye na-edozi ya. Enwere ike ịhazi ugboro nke ebili mmiri square site na ntinye hf_sig_period_i. A na-ewepụ akara ngosi cos_i na sin_i sitere na windings nke abụọ ma na-enyocha ya iji nweta akara cosine na sine dị irè. A na-eji Loop-Locked Loop (PLL) wepụ akụkụ na ọsọ site na akara cosine na sine.
PLL na-eji onye njikwa PI nke uru pll_pi_kp_i na pll_pi_ki_i nwere ike dezie iji nweta oge nzaghachi achọrọ. Uru dị elu maka uru na-ebute nzaghachi ngwa ngwa na mgbanwe n'akuku na ọsọ ọsọ mana ọ nwekwara ike ịkpata mkpọtụ na akụkụ na ọsọ ọsọ.
N'ime ngwa njikwa moto, ọnọdụ efu ga-adabarịrị na ọnọdụ efu magnetik. Iji nweta nke a, a na-eji akara calib_angle_i. N'oge nhazi nhazi, mgbaàmà na-aga elu ma na-amanye moto ahụ ka ọ kwado rotor ya na ọnọdụ efu magnetik. A na-atọgharị mmepụta akụkụ ka ọ bụrụ efu n'ime oge a ma were ya dị ka ntụaka maka ịlele akụkụ zuru oke. Moto na onye na-edozi ihe nwere ike ịnwe ọtụtụ ụzọ ụzọ abụọ nke njikwa moto chọrọ mgbanwe mgbanwe theta (3600) maka otu ntụgharị igwe nke rotor. Enwere ike ịhazi atụmatụ a site na ọdụ ụgbọ mmiri pp_ratio_i, nke edepụtara na Tebụl 2-2.
A na-agbakọ oge niile theta_factor site na iji nhata ndị a. Enwere ike ịgbakọ ọsọ gbakọọ na otu nkeji site na iji theta_factor_i.
EQ1
Ntinye hf_sig_period na-ekpebi ugboro ebili mmiri square agbabanyere n'ime resolver primary, gbakọọ site na iji nhata ndị a.
EQ2
ebee,
hf_freq = Ugboro nke ebili mmiri square etinyere n'ime resolver primary fsys_clk = Ugboro elekere sistemụ enyere na ntinye sys_clk_i
Ihe ngbanwe ihu igwe na akara ngosi (Jụọ ajụjụ)
Nkebi a na-atụle paramita dị na Resolver interface GUI configurator na akara I/O.
Nhazi nke GUI Parameters (Jụọ ajụjụ)
Tebụlụ na-esote depụtara nkọwa nke oke nhazi ejiri na mmejuputa ngwaike nke interface Resolver. Ndị a bụ parampat ma nwee ike ịdịgasị iche dịka ihe ngwa chọrọ.
Isiokwu 2-1. Nhazi nhazi
| Aha mgbaàmà | Nkọwa |
| g_NO_MCYCLE_PATH | Ọnụọgụ nke igbu oge elekere achọrọ tupu ekwupụta mgbaàmà njikere ngwaahịa n'ịba ụba. |
Ihe nrịbama ntinye na ntinye (Jụọ ajụjụ)
Tebụlụ na-esonụ na-edepụta ọdụ ntinye na mmepụta nke interface Resolver.
Tebụl 2-2. Ntinye na mpụta nke Interface Resolver
| Aha mgbaàmà | Ntuziaka | Nkọwa | |
| reset_i | Ntinye | Mgbama nrụpụta asynchronous dị ala na-arụ ọrụ iji chepụta | |
| sys_clk_i | Ntinye | Elekere sistemụ | |
| doro anya_buffer_i | Ntinye | Mgbe atọrọ na 1, a na-ekpocha ihe nchekwa nzacha ime ọsọ mgbe atọrọ na 0, a na-arụkwa ihe nchekwa | |
| calib_angle_i | Ntinye | IP na-abanye n'ọnọdụ nhazi mgbe mgbama a na-adị elu. A na-agbakọ nkwụghachi akụkụ n'etiti efu efu na moto magnetik efu na steeti a. | |
| direction_config_i | Ntinye | Na-akọwapụta ntụzịaka ntụgharị moto | |
| pp_ratio_i | Ntinye | Ọnụọgụ nke ọnụọgụ okporo ụzọ moto na ọnụọgụ okporo osisi ndị egosipụtara dị ka mpụta nke 2. Ọpụample maka okporo osisi moto 16, okporo osisi 2, pp_ratio_i = 3; Maka mkpanaka moto 8, okporo osisi 2, pp_ratio_i= 2; Maka mkpanaka moto 4, okporo osisi 4,
pp_ratio_i = 0. |
|
| cos_i | Ntinye | Ntinye ikuku nke cosine (sitere na ADC) | |
| mmehie_i | Ntinye | Ntinye sine winding (sitere na ADC) | |
| pl_pi_kp_i | Ntinye | Uru nha nha nke njikwa PI ejiri maka PLL | |
| pl_pi_ki_i | Ntinye | Uru ntinye nke onye njikwa PI ejiri maka PLL | |
| dc_filter_factor | Ntinye | Nzacha oge na-agbanwe agbanwe nke nzacha ngafe dị elu ejiri wepụ uru DC na akara Sine na Cosine | |
| ac_filter_factor | Ntinye | Nzacha oge na-agbanwe agbanwe nke nzacha dị ala nke a na-eji wepụ ihe nrụgharị ugboro ugboro maka akara Sine na Cosine | |
| ihe kpatara_i | Ntinye | Theta ihe na-adịgide adịgide, dị ka agbakọrọ si EQ1 | |
| hf_sig_period_i | Ntinye | Ọkara uru nke elu ugboro square ife oge oge, dị ka gbakọọ si
EQ2 |
|
| hf_signal_o | Mpụta | A na-eji mgbama ebili mmiri square na-ebufe ikuku nke ihe ndozi | |
| nketa_o | Mpụta | Mmepụta akụkụ nke onye nbibi; nhata moto eletriki akụkụ | |
| ọsọ_o | Mpụta | Mmepụta ọsọ ọsọ nke IP na-edozi | |
Eserese oge (Jụọ ajụjụ)
Akụkụ a na-atụle eserese oge Resolver interface.
Ọnụọgụ na-esonụ na-egosi eserese oge nke interface Resolver.
Ọgụgụ 3-1. Eserese oge ihe ngbanwe ihu
Testbench (Jụọ ajụjụ)
A na-eji testbench jikọtara ọnụ iji nyochaa ma nwalee interface Resolver nke a na-akpọ dị ka testbench onye ọrụ. A na-enye Testbench iji lelee ọrụ nke interface Resolver IP.
Simulation (Jụọ ajụjụ)
Usoro ndị a na-akọwa otu esi eme ka isi na-eji testbench:
- Mepee taabụ katalọgụ Libero SoC, gbasaa Solutions-Motor Control, pịa Resolver Interface ugboro abụọ, wee pịa OK. Edepụtara akwụkwọ ejikọtara na IP n'okpuru Documentation.
Ihe dị mkpa: Ọ bụrụ ị naghị ahụ taabụ katalọgụ, gaa na View > Menu Windows wee pịa katalọgụ ka a hụ ya.
Ọgụgụ 4-1. Resolver Interface IP Core na Libero SoC katalọgụ
- Na taabụ Stimulus Hierarchy, họrọ testbench (resolver_interface_tb.v), pịa aka nri wee pịa Simulate Pre-Synth Design> Mepee Interactively.
Ihe dị mkpa:Ọ bụrụ na ịhụghị taabụ Stimulus Hierarchy, gaa na View > Menu Windows wee pịa Stimulus Hierarchy iji mee ka a hụ ya.
Ọgụgụ 4-2. Na-eme atụmatụ tupu synthesis
ModelSim meghere ya na testbench file, dị ka e gosiri na foto na-esonụ.
Ọgụgụ 4-3. Ohere Simulation Model
Ihe dị mkpa: Ọ bụrụ Akwụsịla ịme anwansị ahụ n'ihi oke oge ịgba ọsọ akọwapụtara na .do file, jiri ọsọ-niile iwu imezu simulation.
Akụkọ ngbanwe (Jụọ ajụjụ)
Akụkọ ngbanwe ahụ na-akọwa mgbanwe ndị etinyere na akwụkwọ ahụ. Edepụtara mgbanwe ndị a site na ntughari, malite na mbipụta kachasị ugbu a.
Isiokwu 5-1. Akụkọ ngbanwe
| Ndozigharị | Ụbọchị | Nkọwa |
| A | 03/2023 | A na-eme ndepụta mgbanwe ndị a na ngbanwe A nke akwụkwọ ahụ:
|
| 4.0 | — | Ihe na-esonụ bụ nchịkọta mgbanwe ndị emere na ntughari 4.0 nke akwụkwọ a |
| 3.0 | — | Ihe na-esonụ bụ nchịkọta mgbanwe ndị emere na ntughari 3.0 nke akwụkwọ a
|
| 2.0 | 01/2017 | Ihe na-esonụ bụ nchịkọta mgbanwe ndị emere na ntughari 2.0 nke akwụkwọ a.
|
| 1.0 | 11/2016 | Ndozigharị 1.0 bụ mbipụta izizi nke akwụkwọ a. |
Nkwado Microchip FPGA (Jụọ ajụjụ)
Otu ngwaahịa Microchip FPGA na-eji ọrụ nkwado dị iche iche kwado ngwaahịa ya, gụnyere Ọrụ Ndị Ahịa, Ụlọ Ọrụ Nkwado nka na ụzụ Ndị Ahịa, a websaịtị, na ụlọ ahịa ahịa zuru ụwa ọnụ. A na-atụ aro ka ndị ahịa gaa na akụrụngwa Microchip n'ịntanetị tupu ha akpọtụrụ nkwado n'ihi na o yikarịrị ka azaghachila ajụjụ ha.
Kpọtụrụ Ụlọ Ọrụ Nkwado nka na ụzụ site na websaịtị na www.microchip.com/support. Kwuo nọmba akụkụ ngwaọrụ FPGA, họrọ udi ikpe dabara adaba, wee bulite imewe files mgbe ị na-ekepụta ikpe nkwado teknụzụ.
Kpọtụrụ ọrụ ndị ahịa maka nkwado ngwaahịa na-abụghị teknụzụ, dị ka ọnụahịa ngwaahịa, nkwalite ngwaahịa, mmelite ozi, ọkwa ịtụ na ikike.
- Site na North America, kpọọ 800.262.1060
- Site na ụwa ndị ọzọ, kpọọ 650.318.4460
- Fax, si n'ebe ọ bụla n'ụwa, 650.318.8044
Ozi Microchip (Jụọ ajụjụ)
Microchip Websaịtị (Jụọ ajụjụ)
Microchip na-enye nkwado ntanetị site na anyị websaịtị na www.microchip.com/. Nke a weba na-eji saịtị eme ihe files na ozi dị mfe maka ndị ahịa. Ụfọdụ ọdịnaya dị gụnyere:
- Nkwado ngwaahịa – Ibé akwụkwọ data na errata, ndetu ngwa na sampmmemme, akụrụngwa imewe, ntuziaka onye ọrụ na akwụkwọ nkwado ngwaike, ewepụtara sọftụwia kacha ọhụrụ yana sọftụwia echekwara
- Nkwado nka na ụzụ izugbe - Ajuju a na-ajụkarị (FAQ), arịrịọ nkwado teknụzụ, otu mkparịta ụka n'ịntanetị, ndepụta ndị otu mmemme mmebe Microchip
- Azụmahịa nke Microchip – ntuziaka onye na-ahọpụta ngwaahịa na ịtụ iwu, mbipụta akwụkwọ akụkọ Microchip kacha ọhụrụ, ndepụta nke nzukọ ọmụmụ na mmemme, ndepụta nke ụlọ ahịa Microchip, ndị nkesa na ndị nnọchi anya ụlọ ọrụ mmepụta ihe.
Ọrụ ngosi mgbanwe ngwaahịa (Jụọ ajụjụ)
Ọrụ ngosi mgbanwe ngwaahịa Microchip na-enyere ndị ahịa aka ugbu a na ngwaahịa Microchip. Ndị debanyere aha ga-enweta ọkwa email mgbe ọ bụla enwere mgbanwe, mmelite, nlegharị anya ma ọ bụ errata metụtara ezinụlọ ngwaahịa akọwapụtara ma ọ bụ ngwa mmepe nke mmasị.
Iji debanye aha, gaa na www.microchip.com/pcn ma soro ntuziaka ndebanye aha.
Njirimara nchedo koodu ngwaọrụ Microchip (Jụọ ajụjụ)
Rịba ama nkọwa ndị a nke njirimara nchedo koodu na ngwaahịa Microchip:
- Ngwaahịa Microchip na-ezute nkọwapụta dị na mpempe data Microchip ha.
- Microchip kwenyere na ezinaụlọ nke ngwaahịa ya nwere nchekwa mgbe ejiri ya n'ụzọ achọrọ, n'ime nkọwapụta ọrụ yana n'okpuru ọnọdụ nkịtị.
- Ụkpụrụ Microchip na-eji ike na-echebe ikike ikike ọgụgụ isi ya. Mgbalị imebi njirimara nchedo koodu nke ngwaahịa Microchip bụ nke amachibidoro nke ọma ma nwee ike imebi iwu nwebiisinka nke Millennium Digital.
- Ma Microchip ma ọ bụ ndị nrụpụta semiconductor ọ bụla enweghị ike ikwe nkwa nchekwa nke koodu ya. Nchedo koodu apụtaghị na anyị na-ekwe nkwa na ngwaahịa a "enweghị ike imebi". Nchekwa koodu na-agbanwe mgbe niile. Microchip agba mbọ na-aga n'ihu na-emeziwanye njirimara nchedo koodu nke ngwaahịa anyị.
Ozi Iwu (Jụọ ajụjụ)
Enwere ike iji akwụkwọ a na ozi dị n'ime ya naanị site na ngwaahịa Microchip, gụnyere iji chepụta, nwalee ma jikọta ngwaahịa Microchip na ngwa gị. Iji ozi a n'ụzọ ọ bụla ọzọ mebiri usoro ndị a. A na-enye ozi gbasara ngwa ngwaọrụ naanị maka ịdị mma gị yana mmelite nwere ike dochie ya. Ọ bụ ọrụ gị ịhụ na ngwa gị dabara na nkọwapụta gị. Kpọtụrụ ụlọ ọrụ ịre ahịa Microchip mpaghara gị maka nkwado ọzọ ma ọ bụ nweta nkwado ọzọ na www.microchip.com/en-us/support/ design-help/client-support-services.
Ozi a bụ MICROCHIP “DỊ KA Ọ BỤ”. MICROCHIP emeghị nnochite anya ma ọ bụ akwụkwọ ikike n'ụdị ọ bụla ma ekwupụta ma ọ bụ kwupụta ya, edere ma ọ bụ n'ọnụ, usoro iwu ma ọ bụ ọzọ, metụtara ozi ahụ gụnyere mana ọnweghị oke n'iwu ọ bụla na-akwadoghị, iwu na-akwadoghị. NA ahụ dị mma maka ebumnuche pụrụ iche, ma ọ bụ akwụkwọ ikike metụtara ọnọdụ ya, ogo ya, ma ọ bụ arụmọrụ ya.
Ọ BỤGHỊ ỌMỤNỤ Ọ BỤGHỊ MICROCHIP GA-AKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỌ Ọ BỤLA OZI Ọ BỤ Ọ BỤ Ọ BỤLA. AKWỤKWỌ NDỊ NDỊ DỊ MMADỤ N'ỤRỤ IKE MA Ọ BỤ NDỊ MMADỤ AHỤ. Ruo n'ụzọ zuru ezu iwu kwadoro, MICROCHIP'S TOTAL IBLIability na ebubo niile n'ụzọ ọ bụla metụtara ozi ahụ ma ọ bụ ojiji ya agaghị agafe ego nke ụgwọ, ma ọ bụrụ na ọ bụla, na ị kwụrụ ozugbo na-agwa ya.
Iji ngwaọrụ Microchip na nkwado ndụ yana/ma ọ bụ ngwa nchekwa bụ kpamkpam n'ihe ize ndụ nke onye zụrụ ya, onye na-azụ ya kwenyere ịgbachitere, kwụọ ụgwọ ma jide Microchip na-adịghị emerụ ahụ site na mmebi ọ bụla, nkwuputa, uwe, ma ọ bụ mmefu sitere na ụdị ojiji ahụ. Ọnweghị ikike ebugara, n'ezoghị ọnụ ma ọ bụ n'ụzọ ọzọ, n'okpuru ikike ikike ọgụgụ isi Microchip ọ gwụla ma ekwuputaghị ya.
Akara ahia (Jụọ ajụjụ)
Aha Microchip na akara ngosi, akara Microchip, Adaptec, AVR, akara AVR, AVR Freaks, BestTime, BitCloud, CryptoMemory, CryptoRF, dsPIC, flex PWR, HELDO, IGLOO, JukeBlox, KeeLoq, Kleer, LANCheck, LinkMD, maXXSty , MediaLB, megaAVR, Microsemi, Microsemi logo, Ọtụtụ, akara ngosi, MPLAB, OptoLyzer, PIC, picoPower, PICSTART, akara PIC32, PolarFire, Prochip Designer, QTouch, SAM-BA, Sengenuity, SpyNIC, SST, SST Logo, SuperFlash, Symmetricom, SyncServer, Tachyon, TimeSource, tinyAVR, UNI/O, Vectron, na XMEGA bụ ụghalaahịa edenyere n'akwụkwọ ikikere nke Microchip Technology Incorporated na USA na obodo ndị ọzọ.
AgileSwitch, APT, ClockWorks, The agbakwunyere Control Control Solutions Company, Ether Synch, Flashtec, Hyper Speed Control, Hyper Light Load, Libero, motorBench, mTouch, Powermite 3, Precision Edge, ProASIC, ProASIC Plus, ProASIC Plus logo, Ụkwụ- Waya, SmartFusion, SyncWorld, Temux, TimeCesium, TimeHub, TimePictra, TimeProvider, TrueTime, na ZL bụ ụghalaahịa edenyere n'akwụkwọ ikikere nke Microchip Technology Incorporated na USA.
Nkwụsị igodo dị n'akụkụ, AKS, Analog-maka-Digital Age, Capacitor ọ bụla, AnyIn, AnyOut, Augmented Switching, BlueSky, BodyCom, Clockstudio, CodeGuard, CryptoAuthentication, Crypto Automotive, Crypto Companion, Crypto Controller, dsPICDEM, dsPICDEM.net, Nkezi ndakọrịta, DAM, ECAN, Espresso T1S, Ether GREEN, Grid Time, Ideal Bridge, In-Circuit Serial Programming, ICSP, INICnet, Intelligent Paralleling, Intel limos, Inter-Chip Connectivity, Jitter Blocker, Knob-on-Display, KoD, max Crypto, maxView, memBrain, Mindi, MiWi, MPASM, MPF, MPLAB Asambodo akara, MPLIB, MPLINK, MultiTRAK, NetDetach, Omniscient Code Generation, PICDEM, PICDEM.net, PICkit, PICtail, PowerSmart, Pure Silicon, QMatrix, REAL ICE, Ripple Blocker, RTAX, RTG4, SAM-
ICE, Serial Quad I/O, simpleMAP, SimpliPHY, Smart Buffer, Smart HLS, SMART-IS, storClad, SQI, SuperSwitcher, SuperSwitcher II, Switchtec, SynchroPHY, ngụkọta ntachi obi, oge ntụkwasị obi, TSHARC, USBCheck, VariSense, VectorBlox, VeriPHY , ViewSpan, WiperLock, XpressConnect, na ZENA bụ ụghalaahịa nke Microchip Technology Incorporated na USA na obodo ndị ọzọ.
SQTP bụ akara ọrụ Microchip Technology Incorporated na USA
Akara Adaptec, Frequency on Demand, Silicon Storage Technology, na Symmcom bụ ụghalaahịa edenyere n'akwụkwọ ikikere nke Microchip Technology Inc. na obodo ndị ọzọ.
GestIC bụ ụghalaahịa edenyere n'akwụkwọ ikikere nke Microchip Technology Germany II GmbH & Co.KG, onye enyemaka Microchip Technology Inc., na mba ndị ọzọ.
ụghalaahịa ndị ọzọ niile a kpọtụrụ aha n'ime ebe a bụ akụ nke ụlọ ọrụ ha.
© 2023, Microchip Technology Incorporated na ndị enyemaka ya. Ikike niile echekwabara.
ISBN: 978-1-6683-2177-5
Sistemụ njikwa ogo (Jụọ ajụjụ)
| AMERIKA | ASIA/PACIFIC | ASIA/PACIFIC | EUROPE |
| Ụlọ ọrụ ụlọ ọrụ
2355 West Chandler Blvd. Chandler, AZ 85224-6199 Tel: 480-792-7200 Fax: 480-792-7277 Nkwado ndị teknuzu: www.microchip.com/support Web adreesị: www.microchip.com Atlanta Duluth, GA Tel: 678-957-9614 Fax: 678-957-1455 Austin, TX Tel: 512-257-3370 Boston Westborough, MA Tel: 774-760-0087 Fax: 774-760-0088 Chicago Itasca, IL Tel: 630-285-0071 Fax: 630-285-0075 Dallas Addison, TX Tel: 972-818-7423 Fax: 972-818-2924 Detroit Novi, MI Tel: 248-848-4000 Houston, TX Tel: 281-894-5983 Indianapolis Noblesville, na Tel: 317-773-8323 Fax: 317-773-5453 Tel: 317-536-2380 Los Angeles Mission Viejo, CA Tel: 949-462-9523 Fax: 949-462-9608 Tel: 951-273-7800 Raleigh, NC Tel: 919-844-7510 New York, NY Tel: 631-435-6000 San Jose, CA Tel: 408-735-9110 Tel: 408-436-4270 Canada - Toronto Tel: 905-695-1980 Fax: 905-695-2078 |
Australia - Sydney
Nọmba ekwentị: 61-2-9868-6733 China - Beijing Nọmba ekwentị: 86-10-8569-7000 China - Chengdu Nọmba ekwentị: 86-28-8665-5511 China - Chongqing Nọmba ekwentị: 86-23-8980-9588 China - Dongguan Nọmba ekwentị: 86-769-8702-9880 China - Guangzhou Nọmba ekwentị: 86-20-8755-8029 China - Hangzhou Nọmba ekwentị: 86-571-8792-8115 China - Hong Kong SAR Tel: 852-2943-5100 China - Nanjing Nọmba ekwentị: 86-25-8473-2460 China - Qingdao Nọmba ekwentị: 86-532-8502-7355 China - Shanghai Nọmba ekwentị: 86-21-3326-8000 China - Shenyang Nọmba ekwentị: 86-24-2334-2829 China - Shenzhen Nọmba ekwentị: 86-755-8864-2200 China - Suzhou Nọmba ekwentị: 86-186-6233-1526 China - Wuhan Nọmba ekwentị: 86-27-5980-5300 China - Xian Nọmba ekwentị: 86-29-8833-7252 China - Xiamen Tel: 86-592-2388138 China - Zhuhai Tel: 86-756-3210040 |
India - Bangalore
Nọmba ekwentị: 91-80-3090-4444 India - New Delhi Nọmba ekwentị: 91-11-4160-8631 India - Pune Nọmba ekwentị: 91-20-4121-0141 Japan - Osaka Nọmba ekwentị: 81-6-6152-7160 Japan - Tokyo Nọmba ekwentị: 81-3-6880-3770 Korea - Daegu Nọmba ekwentị: 82-53-744-4301 Korea - Seoul Nọmba ekwentị: 82-2-554-7200 Malaysia - Kuala Lumpur Nọmba ekwentị: 60-3-7651-7906 Malaysia - Penang Nọmba ekwentị: 60-4-227-8870 Philippines - Manila Nọmba ekwentị: 63-2-634-9065 Singapore Tel: 65-6334-8870 Taiwan - Hsin Chu Nọmba ekwentị: 886-3-577-8366 Taiwan - Kaohsiung Nọmba ekwentị: 886-7-213-7830 Taiwan - Taipei Nọmba ekwentị: 886-2-2508-8600 Thailand - Bangkok Nọmba ekwentị: 66-2-694-1351 Vietnam - Ho Chi Minh Nọmba ekwentị: 84-28-5448-2100 |
Austria – Wels
Nọmba ekwentị: 43-7242-2244-39 Faksị: 43-7242-2244-393 Denmark - Copenhagen Tel: 45-4485-5910 Faksị: 45-4485-2829 Finland - Espoo Nọmba ekwentị: 358-9-4520-820 France - Paris Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79 Germany - na-agba ọsọ Tel: 49-8931-9700 Germany - Haan Tel: 49-2129-3766400 Germany - Heilbronn Tel: 49-7131-72400 Germany - Karlsruhe Tel: 49-721-625370 Germany - Munich Tel: 49-89-627-144-0 Fax: 49-89-627-144-44 Germany - Rosenheim Nọmba ekwentị: 49-8031-354-560 Israel - Ra'anana Nọmba ekwentị: 972-9-744-7705 Ịtali - Milan Tel: 39-0331-742611 Faksị: 39-0331-466781 Ịtali - Padova Tel: 39-049-7625286 Netherlands - mmanya Tel: 31-416-690399 Faksị: 31-416-690340 Norway - Trondheim Nọmba ekwentị: 47-72884388 Poland - Warsaw Tel: 48-22-3325737 Romania - Bucharest Tel: 40-21-407-87-50 Spain - Madrid Tel: 34-91-708-08-90 Fax: 34-91-708-08-91 Sweden - Gothenberg Tel: 46-31-704-60-40 Sweden - Stockholm Nọmba ekwentị: 46-8-5090-4654 UK - Wokingham Nọmba ekwentị: 44-118-921-5800 Faksị: 44-118-921-5820 |
Nkwado ndị ahịa (Jụọ ajụjụ)
Ndị na-eji ngwaahịa Microchip nwere ike ịnweta enyemaka site na ọtụtụ ọwa:
Onye nkesa ma ọ bụ onye nnọchi anya
Ụlọ ọrụ ire ahịa mpaghara
Injinia Ngwọta agbakwunyere (ESE)
Nkwado ndị teknuzu
Ndị ahịa kwesịrị ịkpọtụrụ onye nkesa ha, onye nnọchi anya ma ọ bụ ESE maka nkwado. Ọfịs ahịa mpaghara dịkwa maka
nyere ndị ahịa aka. Agụnyere ndepụta ụlọ ọrụ ahịa na ebe n'ime akwụkwọ a.
Nkwado nka na ụzụ dị site na websaịtị na: www.microchip.com/support
Akwụkwọ / akụrụngwa
 |
MICROCHIP V43 Resolver Interface [pdf] Ntuziaka onye ọrụ Interface V43 Resolver, V43, Interface Resolver, Interface |