CMP58 E aofia ai CPM-SP Va'aiga
“
Fa'amatalaga
- Models covered: CMP58 CPM77 CPM96 CPM116 CPM146 CPM176 (Does
not include CPM-SP range) - Fa'amaonia mo le fa'aoga i vaega fa'afefe: B23, C13, C33, C43, C53,
C63, C83
Fa'atonuga o le Fa'aaogaina o Mea
Faiga Fa'a'au'au Fa'a'au'au Lua-Pipe Ituaiga C53
For twin-pipe flue systems, follow the sizing and calculation
guidelines provided on page 12 of the manual.
Fa'aleaganu'u (Na'o Fa'asu'u) Faiga Fa'aa'au Ituaiga B23
For conventional flue systems, refer to page 15 for sizing and
calculation instructions.
Flue Systems Using Flue Not Supplied by Lochinvar Type C63
If using a flue not supplied by Lochinvar, follow the guidelines
outlined on page 16 for common flue systems.
FAQ
Q: What standards should installations comply with?
A: All installations should comply with BS5440-1:2023 for
appliances up to 70kW net input. Refer to drawing 1 and table 1 for
terminal locations.
“`
CPM Boiler range Flue Guide
Models covered: CMP58 CPM77 CPM96 CPM116 CPM146 CPM176 Does not include CPM-SP range
Mataupu
GENERAL………………………………………………………………………………………………………………………………………………… 2 Drawing 1 Boiler terminal locations………………………………………………………………………………………………………….5 Table 1 Boiler terminal locations ……………………………………………………………………………………………………………..5 Table 2 risk assesment …………………………………………………………………………………………………………………………..6 Boiler flue information…………………………………………………………………………………………………………………………..6
CONCENTRIC FLUE SYSTEMS ………………………………………………………………………………………………………………………7 Horizontal Type C13 ……………………………………………………………………………………………………………………………….7 Plume kit for use with horizontal flue……………………………………………………………………………………………………….8 Vertical Type C33……………………………………………………………………………………………………………………………………9 Concentric flue sizing/calculations …………………………………………………………………………………………………………10
TWIN-PIPE FLUE SYSTEMS TYPE C53 ……………………………………………………………………………………………………………11 Twin-Pipe flue sizing/calculations…………………………………………………………………………………………………………..12
CONVENTIONAL (EXHAUST ONLY) FLUE SYSTEMS TYPE B23…………………………………………………………………………….14 Conventional flue sizing/calculations………………………………………………………………………………………………………15
FLUE SYSTEMS USING FLUE NOT SUPPLIED BY LOCHINVAR TYPE C63………………………………………………………………..16 COMMON FLUE SYSTEMS ………………………………………………………………………………………………………………………..16 ORDER FORM AND NOTES ……………………………………………………………………………………………………………………….17
Itulau 1 o le 19
TALA ATU
Lochinvar CPM Boilers ua fa'amaonia mo le fa'aogaina i vaega fa'aa'au nei:
Fa'apipi'i ituaiga Vaega
Fa'amatalaga
B23
Tatala paipa
O se masini e fa'amoemoe e fa'afeso'ota'i i se fa'a'a'a'ele'ele e aveese ai mea fa'amumu i fafo o le potu o lo'o iai le masini. O le ea mu e aumai sa'o mai le potu.
C13
Fua Tapuni
O se masini e feso'ota'i i se fa'a'a'a'a fa'a'au'au fa'a'au'au po'o se lua paipa fa'atasi ma le fa'alava fa'atutusa. E tatau ona i ai i totonu o le sone mamafa e tasi le ea ea ma le paipa.
C33
Fua Tapuni
O se masini e feso'ota'i i se fa'a'a'a'a fa'a'au'au fa'a'au'au po'o se lua-paipa fa'atasi ai ma le fa'alava Vertical. E tatau ona i ai i totonu o le sone mamafa e tasi le ea ea ma le paipa.
O se masini e feso'ota'i i se fa'aulu masani o le ea ma le fa'a'a'a'a'a, lea ua mamanuina mo le sili atu
C43
Tapuni Flue tasi masini. O lenei faiga masani e tasi le ea ea ma fa'a'au'au fau ma o se vaega o le fale e le
le meafaigaluega.
C53
Fua Tapuni
O se masini e feso'ota'i i se fa'a'a'a'a masaga paipa fa'atasi ai ma le fa'alava fa'atutusa po'o le Vertical. E mafai ona eseese sone mamafa o le ea ma le fa'a'a'a'a.
O se masini e fa'amoemoe e fa'afeso'ota'i i se faiga fa'apitoa fa'amaonia ma maketiina mo le tu'uina atu o
C63
Tapuni Fua ea mu ma lafoa'i oloa mu (fa'atusa e ese mai le mea e maua mai e le fa'avevela vai.
gaosi oloa).
O se mea faigaluega e feso'ota'i atu i se tasi o ona alavai i se faiga e tasi pe masani. O lo'o iai le faiga ala lea
C83
Fua Tapuni
o se ala fa'alenatura e tasi (e le'o fa'apipi'iina se ili) e fa'ate'a ese ai mea o le mu. E feso'ota'i le masini e ala i le lona lua o ona alavai i se fa'amau, lea e sau ai le ea i le masini
mai fafo o le fale.
O mea faʻapipiʻi uma e tatau ona tausisia manaoga o:
1. Mo masini e o'o atu i le 70kW net input- BS5440-1:2023- Fa'aa'a'a ma fa'a'avevela mo mea kasa o lo'o fa'amauina fa'aoga e le sili atu i le 70 kW net (1st, 2nd and 3rd family kasa). Fa'amatalaga mo le fa'apipi'iina o masini kasa i alaasu ma mo le tausiga o alaasu. a. Va'ai ile ata 1 ma le laulau 1 mo fa'amatalaga o nofoaga fa'amautu.
2. Mo masini e sili atu i le 70kW net input- IGEM/UP/10 Lomiga 4 +A: 2016 – Fa'apipi'i masini kasa fa'afefe i fale gaosimea ma pisinisi, e tatau ona va'aia vaega nei. a. Va'ai ile ata 1 ma le laulau 1 mo fa'amatalaga o nofoaga fa'amautu. e. Fa'agata fa'alava e tatau ona fa'amauina e tusa ai ma le mamao aupito maualalo o lo'o tu'uina atu i le siata 1, ma fa'atatau i fa'ata'ita'iga o su'esu'ega o lamatiaga o lo'o fa'aalia i le siata 2. i. E le tatau ona fa'apipi'i fa'auma fa'alava fa'alava (e ese mai i faiga fa'afefete ili) mo so'o se masini e tasi po'o se vaega o mea faigaluega fa'atasi ai ma le aofa'i o mea fa'aoga e sili atu i le 333kW fa'ainitaneti. o. Mo so'o se masini e tasi po'o se vaega o mea faigaluega e iai le aofa'i o le vevela e sili atu i le 333 kW, o mana'oga lautele o le IGEM/UP/10 Lomiga 4 + A: 2016 e tatau ona fa'aoga ma e tatau ona sailia le fa'atagaga mai le Pulega Fa'aitumalo a'o le'i amataina le fa'apipi'iina.
3. Le Tulafono o le Ea Mama mo mea fa'apipi'i e sili atu i le 333kW nett input.
Itulau 2 o le 19
DRAWING 1 BOILER TERMINAL LOCATIONS ACCORDING TO BS5440-1-2023
TABLE 1 BOILER TERMINAL LOCATIONS ACOORDING TO BS5440-1-2023
Fa'amatalaga nofoaga
A
I lalo tonu o se avanoa, piliki ea, faʻamalama tatala ma isi.
B
I luga aʻe o se avanoa, piliki ea, faʻamalama tatala ma isi.
C
Fa'asaga i se avanoa, piliki ea, fa'amalama matala ma isi.
D
I lalo ifo o se alavai po'o se paipa mama
E
I lalo ifo o taligalu
F
I lalo ifo o le faapaologa po'o le taualuga o le taulaga
G
Mai se alavai sa'o po'o se paipa palapala
H
Mai se tulimanu totonu po'o fafo
I
I luga aʻe o le eleele, taualuga poʻo le faapaologa maualuga
J
Mai luga o le fa'asaga i le fa'ailoga
K
Mai se nofoaga fa'asaga i le fa'ailoga
L
Mai se avanoa i totonu o le taulaga o taavale (eg, faitotoa, faamalama) i totonu o le fale
M
Tusa'o mai se fa'amau i luga o le puipui lava e tasi
N
Fa'asa'o mai se fa'amau i luga o le puipui lava e tasi
O
Horizontally from a mechanical air inlet on the same wall
P
Mai se fausaga tuusao i luga o le taualuga
Q
Luga o fetaulaiga ma le taualuga
R
Diagonally across from an opening into a building on a different wall
S
Vertical terminal from another vertical terminal
T
Vertical terminal adjacent to an opening into a building
U
Vertical terminal from a wall
V
Terminal alongside a boundary
W
Terminal facing a boundary
X
Adjacent to an opening into a building on a pitched roof
Y
Terminal facing an opening into a building
* Contact Lochinvar technical support for help.
CPM58
mm
300
mm
300
mm
300
mm
75
mm
300
mm
200
mm
150
mm
300
mm
300
mm
600
mm
1200
mm
1200
mm
1500
mm
300
mm
1000
mm
N/A
mm
300
mm
600
mm
600
mm
1500
mm
500
mm
300
mm
600
mm
*
mm
2000
Itulau 3 o le 19
TABLE 2 RISK ASSESSMENT ACCORDING TO BS5440-1-2023
Further to the requirements in BS5440-1:2023 Annex D and Figure C.8, table C.1 the following risk assessment gives guidance for the positioning of horizontal flues. This form should be completed before work commences and undertaken by a person who is competent to undertake the risk assessment.
Type C appliances with net heat input not exceeding 70kW Low level flue discharge risk assessment (including net heat input for groups of appliances)
No. Regarding the flue position
Leai Ioe
1 Will the flue terminal contravene the positions set out in table C.1 for room sealed chimney outlets?
Leai Ioe
2
Will the terminal be sited in a position that will likely allow products of combustion to build up (e.g., enclosed by adjacent structures)?
Leai
Ioe
3 Is the termination in a light well?
Leai Ioe
4 Is the termination within a carport without two unobstructed sides?
Leai Ioe
5 Will the termination be in an area that might have combustible material in the vicinity?
Leai Ioe
6 Will the termination be in an area that might have hazardous material in the vicinity (e.g., petrochemicals)?
Leai Ioe
7 Will the termination be sited within a covered walkway? 8 Are there any restrictions stopping the fitting of a terminal guard if required? 9 Will the termination discharge over a boundary?
Leai Ioe Leai Ioe Leai Ioe
10 Is a plume management kit required to circumvent the termination distances as required in table C.1?
Leai Ioe
#11 12
Leai.
Nuisance considerations Is the termination sited over a pathway that is likely to cause nuisance (e.g., head height or pluming towards users)? Is the termination likely to cause a nuisance to neighbours? Chimney/flue routes Will the flue be installed in a void that will not be able to satisfy a full visual inspection?
Leai Ioe
Leai Ioe
Leai Ioe Leai Ioe Leai Ioe
Are there any restrictions that will prevent the flue from being supported throughout its entire length?
Leai Ioe
Do the flue materials contravene building regulations (e.g., high risk buildings)?
Leai Ioe
Will the flue route pass through any fire protected areas without the ability to maintain its protection?
Leai Ioe
Will the flue pass through another dwelling?
Is the flue likely to be damaged due to its route/location (e.g., materials stored on it in a plantroom or storeroom)?
Leai Ioe Leai Ioe
Does the flue affect the integrity of the structure it is in (e.g., lintels, cavity trays, barriers, or membranes)?
Leai Ioe
Afai o tali uma e Blue, o lona uiga e tatau ona talafeagai le tulaga o le paipa
Afai ei ai se tali o le Orange, o lona uiga e le talafeagai le tulaga o le paipa, mafaufau e toe iloilo le tulaga poʻo le ituaiga o paipa pe faʻafesoʻotaʻi le ofisa o le Soifua Maloloina o le Siosiomaga mo se fesoasoani ma/poʻo se faʻatagaga.
Itulau 4 o le 19
DRAWING 2 BOILER TERMINAL LOCATIONS ACCORDING TO IGEM/UP/10 EDITION 4 +A: 2016
TABLE 3 BOILER TERMINAL LOCATIONS ACORDING TO IGEM/UP/10 EDITION 4 +A: 2016
Fa'amatalaga nofoaga
A
I lalo tonu o le avanoa, piliki ea, fa'amalama matala ma isi.#
B
I luga aʻe o se avanoa, piliki ea, faʻamalama tatala ma isi.
C
Fa'asaga i se avanoa, piliki ea, fa'amalama matala ma isi.#
D
I lalo ifo o se alavai po'o se paipa mama
E
I lalo ifo o taligalu
F
I lalo ifo o le faapaologa po'o le taualuga o le taulaga
G
Mai se alavai sa'o po'o se paipa palapala
H
Mai se tulimanu totonu po'o fafo
I
I luga aʻe o le eleele, taualuga poʻo le faapaologa maualuga
J
Mai luga o le fa'asaga i le fa'ailoga
K
Mai se nofoaga fa'asaga i le fa'ailoga
L
Mai se avanoa i le uafu o le taavale (faataitaiga, faitotoa, faamalama) i totonu o le fale
M
Tusa'o mai se fa'amau i luga o le puipui lava e tasi
N
Fa'asa'o mai se fa'amau i luga o le puipui lava e tasi
N+
Tusa'o mai se fa'amau i luga o le taualuga e tasi
P
Mai se fausaga tuusao i luga o le taualuga
Q
Luga o fetaulaiga ma le taualuga
CPM77 CPM96 CPM116 CPM144 CPM175
mm 2500
2500
2500
2500
2500
mm
631
760
896
1092
1294
mm
631
760
896
1092
1294
mm
200
200
200
200
200
mm
200
200
200
200
200
mm
E le fautuaina va'ai UP10 su'esu'ega tulaga lamatia
mm
150
150
150
150
150
mm 1099
1513
1948
2573
3220
mm
300
300
300
300
300
mm 1100
1514
1948
2573
3220
mm 2083
2429
2792
3314
3855
mm
E le fautuaina va'ai UP10 su'esu'ega tulaga lamatia
mm 2500
2500
2500
2500
2500
mm
600
600
900
900
n/a*
600
600
900
900
n/a*
mm 1500
1500
1500
1500
1500
mm
311
359
409
481
556
*Please contact Lochinvar technical support for guidance on CPM175 termination.
The table above should be used in conjunction with the following notes: · Distances shown ensure the boiler will operate without problems under most conditions, these distances can be reduced in certain circumstances · The above should be read in conjunction with the latest edition of BS5440-1 and IGEM UP10 · For boiler installation above 333kW nett input the table above should not be used, these installations are covered by the clean air act and must comply with its requirements in full, contact your local environmental health team for further guidance
Mo nisi ta'iala fa'amolemole fa'afeso'ota'i le Lochinvar Technical support
Itulau 5 o le 19
Table 4 risk assesment The table below is an excerpt from IGEMUP10 and should be used in conjunction with that document
Fa'aopoopo i mana'oga ile IGEM/UP/10 Lomiga 4 +A: 2016 Vaega 8 i lalo ole fuaiupu 8.7.3.3 ma le Ata 7 ole su'esu'ega fa'aletonu o lo'o taua i lalo o lo'o tu'uina atu ai le ta'iala mo le fa'atulagaina o paipa fa'alava. E tatau ona fa'atumu lenei fomu a'o le'i amata galuega ma fa'atino e se tagata e agava'a e fa'atino le su'esu'ega o lamatiaga.
Meafaigaluega Ituaiga C o lo'o i totonu o le vevela e sili atu i le 70 kW ma e le sili atu i le 333 kW su'esu'ega tulaga lamatia o le alu ese o le paipa (e aofia ai le fa'aogaina o le vevela mo vaega o masini)
Leai.
E tusa ai ma le tulaga o le paipa
Leai
Ioe
O le fa'amutaina o le paipa ua fuafuaina i totonu o le mamao i le Ata K o se auala, ala,
1
ala, auala, auala savali, tuaoi o meatotino poʻo se vaega, lea e faʻaaogaina mo le lautele
Leai
Ioe
avanoa lautele e ese mai mo faamoemoega tau tausiga?
2
Po'o le mamao ea ile Ata K ile malae ta'alo le fa'amutaina o le vai,
Leai
Ioe
aoga, lotoa, nofoaga e nonofo ai, po o se vaega e ono faia ai se faatasiga lautele
3
Afai e sili atu i le lua itu le fa'amutaina o le fa'a'a'a'a ua fa'atonuina ona faia lea
Leai
Ioe
tausisia manaoga o le Ata 11B?
O le fa'amutaina o le fa'a'a'a'a ua fuafuaina i totonu o le mamao i le Ata K o se luga po'o
4
elemene faufale e ono a'afia i le pala po'o le fa'aleagaina mai le pa'u
Leai
Ioe
condensate?
5
O le tulaga o le paipa ua fuafuaina i se nofoaga e mafai ona paka ai taavale i totonu
Leai
Ioe
mamao mai le Ata 12 Laina G i le paipa?
6
O iai ni la'au po'o ni la'au i totonu o le mamao e fa'aalia i le Ata K o le
Leai
Ioe
tulaga fa'amautu?
7
O le fa'amutaina o le fa'a'a'a'a o lo'o fuafuaina i totonu o se vaieli moli?
Leai
Ioe
Po'o fa'atupuina mea o lo'o fa'amumu mai le tulaga fa'aa'a'a
8
i lalo o tulaga le lelei o le ea, ona o le le lelei o le tafe o le ea e mafua mai
Leai
Ioe
pa puipui po'o fausaga lata ane ma/po'o fa'atupu fa'alavelave?
9
O le tulaga e muta ai le paipa e ono tupu ai se fa'alavelave i fale tuaoi?
Leai
Ioe
Tulafono Faufale vaega J
10
E i lalo ifo o le 300 mm le fa'amutaina o le fa'aumu mai le tua'oi o le fanua, e pei ona fuaina mai le itu o le alavai i le tuaoi?
Leai
Ioe
E uiga i le Tulafono o le Ea Mama
11
Po'o le aofa'i o galuega a le tagata ta'ito'atasi, po'o le kulupu o fa'alava fa'auma (pe a i totonu o le 5U (silasila i le A3.7)), e sili atu i le 333 kW fa'aoga vevela?
Leai
Ioe
lautele
12
Pe i ai nisi iloiloga e mana'omia mo lenei su'esu'ega o tulaga lamatia, va'ai i se isi pepa.
Leai
Ioe
13
Fa'amatalaga:
If all answers are Blue then the flue position should be suitable If any answer is Orange then the flue position is unsuitable, consider revising the position or type of flue outlet or contac t the local Environmental Health officer for assistance and/or approval
FA'AMATALAGA FA'AVAE FA'AVAE
Model Number FLUE DATA TYPE B23 Nominal flue diameter Maximum flue gas temp Flue gas temperature Flue draught requirements Available pressure for the flue system Maximum flue gas volume FLUE DATA TYPE C13 & C33 Nominal flue diameter Maximum flue gas temp FLUE DATA TYPE C43 & C53 Nominal flue diameter Maximum flue gas temp
mm °C °C mbar Pa g/s
mm °C
mm °C
CPM58
CPM77
80
5.59 to 28.9 6.52 to 38.6 80/125
80
CPM96
CPM116
CPM144
CPM175
100 95 85-95 -0.03 to -0.1 200 7.69 to 47.9 11.6 to 57.7
130 15.2 i le 71.7 20.1 i le 86.2
100/150 95
100
130
95
Itulau 6 o le 19
FA'AALIGA FA'AVAE
Ituaiga Fa'apa'u C13
CPMH001 CONCENTRIC HORIZONTAL FLUE ASSEMBLY MODELS – CPM58, CPM77
Mea Nu
Fa'amatalaga
Included CPM58
LV310757 CONCENTRIC HORIZONTAL TERMINAL – Ø80/125mm PP
1
44.8
M28925B
PILI PULE FAAMALI
1
–
LV310735
PILI 90° Ø80/125mm PP
1
16.1
Ole maualuga ole tete'e ile faiga fa'a'a'amu 200pa
Aofa'i 60.9
CPM77 80.1 28.7 108.8
Item No. LV310740B LV310745B LV310742B LV310743B LV310744B LV310734B LV310735B M84481B
Additional Flue Ancillary Items Description CONCENTRIC EXTENSION – Ø80/125mm PP FIXED CONCENTRIC EXTENSION – Ø80/125mm PP CONCENTRIC EXTENSION – Ø80/125mm PP FIXED CONCENTRIC EXTENSION – Ø80/125mm PP FIXED CONCENTRIC EXTENSION – Ø80/125mm PP TELESCOPIC CONCENTRIC BEND 45° Ø80/125mm PP CONCENTRIC BEND 90° Ø80/125mm PP WALL CLAMP Ø125mm
Dimensions 250mm 500mm 1000mm 2000mm
240mm-360mm See Drawing Below See Drawing Below
N/A
CPMH003 CONCENTRIC HORIZONTAL FLUE ASSEMBLY MODELS – CPM96, CPM116
Mea Nu
Fa'amatalaga
Included CPM96 CPM116
LV310758B CONCENTRIC HORIZONTAL TERMINAL Ø100/150mm PP
1
58
84
M84410B PILI 90° Ø100/150mm PP LAITI PU'U.
1
23.6
34.2
Ole maualuga ole tete'e ile faiga fa'a'a'amu 200pa
Aofa'i 81.6 118.2
CPMH004 CONCENTRIC HORIZONTAL FLUE ASSEMBLY MODELS – CPM144
Mea Nu
Fa'amatalaga
E aofia ai
LV310758B
FA'ATAU FA'ASA'E FA'ASA'E Ø100/150mm PP
1
E61-001-172B
PUTA LILIU FA'ASA'E
1
M84410B
PILI 90° Ø100/150mm PP LAITI PU'U
1
Ole maualuga ole tete'e ile faiga fa'a'a'amu 200pa
Aofa'iga
CPM144 129.9 52.9 182.8
Numera Numera M84405B M84402B M84412B M84413B M84421B M87196B
Fa'amatalaga o Mea Fa'aopoopo Fa'alili Fa'aopoopo
CONCENTRIC EXTENSION Ø100/150mm Cuttable CONCENTRIC EXTENSION Ø100/150mm PP FIXED
CONCENTRIC BEND 90° Ø100/150mm PP CONCENTRIC BEND 45° Ø100/150mm PP
SAMPLING POINT Ø100/150mm PP WALL CLAMP Ø150mm
CPM58-77 A=45mm B=62.5mm
Dimensions 500mm 1000mm
See Drawing Below See Drawing Below
115mm
CPM58-77 A=95mm B=110mm
CPM96-175 A=128mm B=128mm
CPM96-175 A=223mm B=208mm
Itulau 7 o le 19
PLUME KIT FOR USE WITH HORIZONTAL FLUE
PLUME MANAGEMENT KITS LG800008B PLUME MANAGEMENT KIT Ø80/125mm LG800009B PLUME MANAGEMENT KIT Ø100/150mm
Leai
Fa'amatalaga
1 CONCENTRIC BEND 90°-PP
2 CONCENTRIC HORIZONTAL PLUME KIT TERMINAL -PP
3 EXTENSION -PP CUTABLE (1000mm)
4 BEND 90°-PP
5 PLUME KIT BIRD GUARD
6 PLUME KIT FLUE EXIT-PP
7 WALL CLAMP
A INTERNAL DIAMETER
B EXTERNAL DIAMETER
CPM58 Ø80/125mm Ø80/125mm
Ø80mm Ø80mm Ø80mm Ø80mm Ø80mm Ø80mm Ø125mm
CPM77 Ø80/125mm Ø80/125mm
Ø80mm Ø80mm Ø80mm Ø80mm Ø80mm Ø80mm Ø125mm
CPM96 Ø100/150mm Ø100/150mm
Ø100mm Ø100mm Ø100mm Ø100mm Ø100mm Ø100mm Ø150mm
CPM116 Ø100/150mm Ø100/150mm
Ø100mm Ø100mm Ø100mm Ø100mm Ø100mm Ø100mm Ø150mm
CPM144 N/A N/A N/A N/A N/A N/A N/A N/A N/A
CPM175 N/A N/A N/A N/A N/A N/A N/A N/A N/A
The plume kit must not be used to correct an illegal terminal location
Itulau 8 o le 19
TUUIGA TUSI C33
CPMV001 FA'ATA'ITA'I FA'ATA'IGA FA'AVAE FA'AVAE FA'AVAE FA'AVAE - CPM58, CPM77
Item No LV310753 LV310745B
Description CONCENTRIC VERTICAL TERMINAL – Ø80/125mm PP CONCENTRIC EXTENSION – Ø80/125mm PP (500mm)
E aofia ai 11
CPM58 61.5 5.1
LV310742B CONCENTRIC EXTENSION – Ø80/125mm PP FIXED (1000mm)
1
10.2
Ole maualuga ole tete'e ile faiga fa'a'a'amu 200pa
Aofa'i 76.8
CPM77 109.8 9.05 18.1 136.95
Item No. LV310740B LV310745B LV310742B LV310743B LV310744B LV310734B LV310735B M87195B LV302520
Mea Fa'aopoopo Fa'asu'e Fa'aopoopo
Description CONCENTRIC EXTENSION – Ø80/125mm PP FIXED CONCENTRIC EXTENSION – Ø80/125mm PP CONCENTRIC EXTENSION – Ø80/125mm PP FIXED CONCENTRIC EXTENSION – Ø80/125mm PP FIXED CONCENTRIC EXTENSION – Ø80/125mm PP TELESCOPIC CONCENTRIC BEND 45° Ø80/125mm PP CONCENTRIC BEND 90° Ø80/125mm PP WALL CLAMP Ø130mm FLAT ROOF FLASHING Ø140mm ALU
Dimensions 250mm 500mm 1000mm 2000mm
240-360mm See Drawing Below See Drawing Below
N/AN/A
CPMV003 FA'ATA'ITA'I FA'ATA'IGA FA'AVAE FA'AVAE FA'AVAE FA'AVAE - CPM96, CPM116
Mea Nu
Fa'amatalaga
Included CPM96
LV310754B
FA'AVAE FA'AVAE FA'AVAE Ø100/150mm PP
1
80
M84405B CONCENTRIC EXTENSION Ø100/150mm (500mm) Cuttable
1
6.5
M84402B FA'AMATALAGA FA'ATA'U Ø100/150mm (1000mm) PP FA'AVAE
1
13
Ole maualuga ole tete'e ile faiga fa'a'a'amu 200pa
Aofa'i 99.5
CPM116 115.9 9.45 18.9 144.25
Numera Numera M84405B M84402B M84412B M84413B M84421B M87196B
Mea Fa'aopoopo Fa'asu'e Fa'aopoopo
Description CONCENTRIC EXTENSION Ø100/150mm Cuttable CONCENTRIC EXTENSION Ø100/150mm PP FIXED CONCENTRIC BEND 90° Ø100/150mm PP CONCENTRIC BEND 45° Ø100/150mm PP SAMPLING POINT Ø100/150mm PP WALL CLAMP Ø150mm
Dimensions 500mm 1000mm
See Drawing Below See Drawing Below
115mm
CPM58-77 A=45mm B=62.5mm
CPM96-175 A=128mm B=128mm
CPM58-77 A=95mm B=110mm
CPM96-175 A=223mm B=208mm
Concentric flue is unable to be used with CPM175
Itulau 9 o le 19
FA'ATA'U FA'ATA'U/FA'A'UGA
Tetee i Pa
Aitema
CPM 58 80/125 CPM 77 80/125 CPM 96 100/150 CPM 116 100/150
puipui puipui
44.8
80.1
58
84
Fale fa'amau
61.5
109.8
80
115.9
Fa'apa sa'o (m)
10.2
18.1
13.0
18.9
45° tulilima
8.6
15.4
15.5
22.4
90° tulilima
16.1
28.7
23.6
34.2
Pusa pulu
10
10
20
25
To be used for Lochinvar supplied M&G flue system components resistance only
CPM 144 100/150 129.9 179.2 29.2 34.7 52.9 n/a
CPM 175 100/150 188 259.3 42.2 50.2 76.5 n/a
Fa'aaoga le laulau o lo'o i lalo e fa'atatau ai le aofa'i o le fa'afefeteina o le fa'avevela
Aitema
Quantity Resistance Total
Wall terminal Roof terminal Straight tube (m) 45° Elbow 90° Elbow Plume kit
Aofa'iga Tete'e (Pa)
Total calculated system resistance must be less than 200pa
Itulau 10 o le 19
TWIN-PIPE FLUE SYSTEMS ITIGA C53
CPM TWIN-PIPE FLUE ASSEMBLY MODELS CPM58, CPM77
Vertical Flue
Mea Nu
Fa'amatalaga
No Required CPM58 CPM77
LM410084006
1
FA'ATAU FA'AVAE - 130MM PP
38.8 38.8
LV305016
1
FA'A'ALI'E FA'ASA'E Ø80mm
–
–
M28925B
1
PEPA FA'ATA'U (PAI)
–
–
M85283 LM410084992
FA'ATELE Ø80mm – Ø100mm PP
FA'ATELE Ø100mm – Ø130mm PP
Ole maualuga ole tete'e ile faiga fa'a'a'amu 200pa
1 1 Total
–
–
–
–
38.8 38.8
CPM TWIN-PIPE FLUE ASSEMBLY MODELS CPM58, CPM77
Horizontal Flue
Leai
Mea Nu
Fa'amatalaga
Required CPM58
LV310757B
FA'ATAU FA'ASA'E FA'ASA'E Ø80/125mm PP
1
29.86
LV305016
FA'A'ALI'E FA'ASA'E Ø80mm
1
–
M28925B
PEPA FA'ATA'U (PAI)
1
–
Maximum resistance in the flue system
200pa
Aofa'iga
29.86
CPM77 53.4
53.4
Item No. LV310718B M85271B M85272B LV310721B LV310722B M85292B M85291B M87191B
Fa'amatalaga o Mea Fa'aopoopo Fa'alili Fa'aopoopo
EXTENSION – Ø80mm PP CUT TO LENGTH EXTENSION Ø80mm PP CUT TO LENGTH EXTENSION Ø80mm PP CUT TO LENGTH EXTENSION – Ø80mm PP CUT TO LENGTH EXTENSION – Ø80mm PP TELESCOPIC BEND 45° 80mm PP BEND 90° 80mm PP WALL CLAMP Ø80mm
Dimensions 250mm 500mm 1000mm 2000mm
240-360mm See Drawing Below See Drawing Below
N/A
CPM TWIN-PIPE FLUE ASSEMBLY MODELS CPM96, CPM116
Vertical Flue
Item No LM410084006
Fa'amatalaga
VERTICAL TERMINAL 130MM PP
No Required 1
CPM96 38.8
LV305039
HORIZONTAL AIR INLET
1
–
Ø100mm
M28925B
TERMINAL WALL
1
–
PLATES (PAIR)
LM410084992 EXPANDER Ø100mm –
1
–
Ø130mm PP
Ole maualuga ole tete'e ile faiga fa'a'a'amu 200pa
Aofa'iga
38.8
CPM116 38.8
–
38.8
Itulau 11 o le 19
CPM TWIN-PIPE FLUE ASSEMBLY MODELS CPM96, CPM116
Horizontal Flue
Leai
Mea Nu
Fa'amatalaga
Required CPM96
CONCENTRIC
LV310758B
HORIZONTAL TERMINAL
1
38.66
Ø100/150mm PP
LV305039B
FA'AALIGA FA'A'ALI'E Ø100mm ALU
1
–
Ole maualuga ole tete'e ile faiga fa'a'a'amu 200pa
Aofa'i 38.66
CPM116 56
56
Numera Numera M85176B M85177B M85181B M85182B M87193B
Additional Flue Ancillary Items Description EXTENSION Ø100mm PP CUT TO LENGTH EXTENSION Ø100mm PP CUT TO LENGTH BEND 90° 100mm PP BEND 45° 100mm PP WALL BAND (100mm)
Dimensions 500mm 1000mm
See Drawing Below See Drawing Below
n/a
CPM TWIN-PIPE FLUE ASSEMBLY MODELS CPM144, CPM175
Vertical Flue
Mea Nu
Fa'amatalaga
No Required CPM144
LM410084006 VERTICAL TERMINAL –
1
38.8
130MM PP
LV307178
HORIZONTAL AIR INLET
1
–
Ø130mm ALU
Ole maualuga ole tete'e ile faiga fa'a'a'amu 200pa
Aofa'iga
38.8
CPM175 38.8
–
38.8
Item No M70242 M70251 M70252 M87195
Fa'amatalaga o Mea Fa'aopoopo Fa'alili Fa'aopoopo
EXTENSION Ø130mm PP BEND 90° PP BEND 45° PP WALL CLAMP
Dimensions 1000mm 130mm 130mm 130mm
CPM58CPM77 A=72.5mm, B=72.5mm
CPM96CPM116 A=78mm, B=65mm
CPM58CPM77 A=110mm, B=110mm
CPM96CPM116 A=78mm, B=65mm
Itulau 12 o le 19
TWIN-PIPE FLUE SIZING/FAFUAFUAGA
Aitema
Resistance (Pa) Size (mm)
CPM 58 CPM 77 CPM 96 CPM 116
Fa'apa sa'o (i le mita)
80
4.6
8.2
X
X
Straight tube (per metre) 100
1.3
2.3
3.5
5.0
Straight tube (per metre) 130
0.3
0.6
0.9
1.2
45° tulilima
80
4.2
7.6
X
X
45° tulilima
100
2.9
5.1
7.9
11.5
45° tulilima
130
0.6
1.0
1.6
2.3
90° tulilima
80
10.1 18.0
X
X
90° tulilima
100
4.6
8.3
12.7
18.4
90° tulilima
130
1.4
2.4
3.7
5.4
E faʻaaogaina mo Lochinvar tuʻuina atu M&G ea inlet system vaega tetee naʻo
CPM 144 n/a n/a 1.9 n/a n/a 3.5 n/a n/a 8.4
CPM 175 n/a n/a 2.8 n/a n/a 5.1 n/a n/a 12.1
Aitema
Resistance (Pa) Size (mm)
CPM 58 CPM 77 CPM 96 CPM 116
Fa'apa sa'o (i le mita)
80
4.0
7.1
X
X
Straight tube (per metre) 100
1.1
2.0
3.0
4.4
Straight tube (per metre) 130
0.3
0.5
0.7
1.1
45° tulilima
80
3.7
6.5
X
X
45° tulilima
100
2.5
4.4
6.8
9.9
45° tulilima
130
0.5
0.9
1.4
2.0
90° tulilima
80
8.7
15.6
X
X
90° tulilima
100
4.0
7.1
11.0
16.0
90° tulilima
130
1.2
2.1
3.2
4.7
Vertical exhaust terminal
61.5 109.8
80
115.9
Vertical single terminal
–
–
–
–
To be used for Lochinvar supplied M&G flue exhaust system components resistance only
CPM 144 n/a n/a 1.7 n/a n/a 3.0 n/a n/a 7.2 179.2 38.8
CPM 175 n/a n/a 2.4 n/a n/a 4.4 n/a n/a 10.5 259.3 38.8
Fa'aaoga le laulau o lo'o i lalo e fa'atatau ai le fa'afefeteina o le fa'a'a'amu.
Fa'aa'au fau
Item Straight tube (m) 45° Elbow 90° Elbow
Quantity Resistance Total
Ea Ulufale
Concentric Vertical terminal
Aofa'i ole fa'a'a'a'ai fa'asu'e (Pa)
Aitema
Tete'e Tele
Fa'apa sa'o (m)
45° tulilima
90° tulilima
Ea Ulufale
Aofa'i Aofa'iga ea ulufale (Pa)
Aofa'i Tete'e i totonu o le ea ma le fa'a'a'asu (Pa)
Aofa'iga
Total calculated system resistance must be less than 200pa
Itulau 13 o le 19
FA'AFEAGAI (NA'O LE FA'AVAE) FA'AGA SILI I'OGA B23
CPM CONVENTIONAL FLUE ASSEMBLY MODELS CPM58, CPM77
Mea Nu
Fa'amatalaga
No Required CPM58
LV305030B
UA FAI LE EA PULE PULE Ø80/125mm
1
10.8
LM410084006
FA'ATAU FA'AVAE - 130MM PP
1
38.8
M85283
FA'ATELE Ø80mm – Ø100mm PP
1
–
LM410084992
EXPANDER Ø100mm Ø130mm PP
1
–
Maximum resistance in the flue system 200pa Total
51.8
CPM77 19.2 38.8 92.4
Item No. LV310718B M85271B M85272B LV310721B LV310722B M85292B M85291B M87191B
Fa'amatalaga o Mea Fa'aopoopo Fa'alili Fa'aopoopo
EXTENSION – Ø80mm PP CUT TO LENGTH EXTENSION Ø80mm PP CUT TO LENGTH EXTENSION Ø80mm PP CUT TO LENGTH EXTENSION – Ø80mm PP CUT TO LENGTH EXTENSION – Ø80mm PP TELESCOPIC BEND 45° 80mm PP BEND 90° 80mm PP WALL CLAMP Ø80mm
Dimensions 250mm 500mm 1000mm 2000mm
240-360mm See Drawing Below See Drawing Below
N/A
CPM CONVENTIONAL FLUE ASSEMBLY MODELS CPM96, CPM116
Leai
Mea Nu
Fa'amatalaga
Required CPM96
LV304872B
UA FAI LE EA PULE PULE Ø100/150mm
1
11.6
LM410084006
VERTICAL TERMINAL 130MM PP
1
38.8
Maximum resistance in the flue system
200pa
Aofa'iga
64.9
CPM116 16.8 38.8
94.06
CPM CONVENTIONAL FLUE ASSEMBLY MODELS CPM144, CPM175
Mea Nu
Fa'amatalaga
No Required CPM144 CPM175
M81660
APPLIANCE AIR INLET
1
GUARD Ø130mm
LM410084006 VERTICAL TERMINAL –
1
130MM PP
8.7
12.6
38.8
38.8
Ole maualuga ole tete'e ile faiga fa'a'a'amu 200pa
Aofa'iga
47.5
51.4
Item No M70242 M70251 M70252 M87195
Fa'amatalaga o Mea Fa'aopoopo Fa'alili Fa'aopoopo
EXTENSION Ø130mm PP BEND 90° PP BEND 45° PP WALL CLAMP
CPM58-CPM77 A=72.5mm,B=72.5mm CPM96-CPM116 A=78mm, B=65mm
Dimensions 1000mm 130mm 130mm 130mm
CPM58-CPM77 A=110mm, B=110mm CPM96-CPM116 A=78mm, B=65mm
Itulau 14 o le 19
FA'AVAE FA'AVAE FA'AVAE FA'AVAE
Aitema
Resistance (Pa) Size (mm)
CPM 58 CPM 77 CPM 96 CPM 116
Fa'apa sa'o (i le mita)
80
4.0
7.1
X
X
Straight tube (per metre) 100
1.1
2.0
3.0
4.4
Straight tube (per metre) 130
0.3
0.5
0.7
1.1
45° tulilima
80
3.7
6.5
X
X
45° tulilima
100
2.5
4.4
6.8
9.9
45° tulilima
130
0.5
0.9
1.4
2.0
90° tulilima
80
8.7
15.6
X
X
90° tulilima
100
4.0
7.1
11.0
16.0
90° tulilima
130
1.2
2.1
3.2
4.7
Vertical single terminal
–
–
–
–
E faʻaaogaina mo Lochinvar tuʻuina atu M&G ea inlet system vaega tetee naʻo
CPM 144 n/a n/a 1.7 n/a n/a 3.0 n/a n/a 7.2 38.8
CPM 175 n/a n/a 2.4 n/a n/a 4.4 n/a n/a 10.5 38.8
Fa'aaoga le laulau o lo'o i lalo e fa'atatau ai le fa'afefeteina o le fa'a'a'amu.
Aitema
Tete'e Tele
Fa'apa sa'o (m)
45° tulilima
90° tulilima
Concentric Vertical terminal
Aofa'i ole fa'a'a'a'ai fa'asu'e (Pa)
Aofa'iga
Total calculated system resistance must be less than 200pa
Itulau 15 o le 19
FLUE FA'A'OA'OGA E FA'A'OA'O E LE'O FA'AVAE E LOCHINVAR ITIGA C63
In general, boilers are certified with their own purpose supplied Concentric or Twin Pipe flue systems, C63 certified appliances allow the installer to use other flue systems when installing the boiler however, they must be of a suitable minimum standard as per table below.
CE manoa Fua kasa mea
Europea n standard Temperature
clas s Pressure class Resistance to condensate
Corrosio n resistance
clas s Metal: liner specifications
Soot fire resistance
clas s Distance to combustible
material Plastics: Plastics: fire behaviour Plastics:
min. eis PP EN 14471 T120
P1
W
min. eis RVS EN 1856-1 T120
P1
W
1
n/a
O
1
L20040
O
Mea
Fauvela
dnom
I fafo
dinside
Linsert
SS
CPM58-CPM77 80 80 +0,3/ -0,7 81 +0,3/ -0,3 50 +2/ -2
SS
CPM96-CPM116 100 100 +0,3/ -0,7 101 +0,3/ -0,3 50 +2/ -2
SS CPM144-CPM175 130 130 +0,3/ -0,7 131 +0,5/ -0,5 50 +2/ -2
PP
CPM58-CPM77 80 80 +0,6/ -0,6
50 +20/ -2
PP
CPM96-CPM116 100 100 +0,6/ -0,6
50 +20/ -2
PP CPM144-CPM175 130 130 +0,9/ -0,9
50 +20/ -2
30
I o EC/E
L
40
n/an/an/a
E le tatau ona fa'aogaina le paipa alumini i luga o lenei masini ona e mafai ona vave fa'aletonu le fa'aliliu vevela ma fa'aleaogaina ai le tusi saisai.
FA'AIGA MASANI
Lochinvar can supply a PP common flue header see separate guide available at www.lochinvar.ltd.uk
Alternatively the installer can use a flue installation specialist to design and supply a separate flue system under the flue designation C63 using the specifications shown on page 13 and information in the table below.
Any installations using flue type C63 must be designed and installed in compliance with any local Building or planning regulations, but as these systems use a flue system not supplied by Lochinvar, Lochinvar cannot comment / advise or provide support on the design of this type of flue system. To design such a flue system, the installer/contractor must consult a specialist flue supplier who will be responsible for the design and installation of the separate flue system. When designing the type C63 flue system, the instructions in the Installation Manual, provided with the boiler, must be taken into account. Lochinvar will provide pressure loss figures for the specific units, but other than that, Lochinvar cannot provide support on Common Flue requests because flue certification is limited to the certified categories in the table on page 2. Lochinvar cannot accept any responsibility for Flue system design.
Available pressure at the flue gas outlet Flue Gas Mass Rate (G20) 96% (g/sec) Flue Gas Mass Rate (G20) 25% (g/sec) Flue Gas Mass Rate (G31) 96% (g/sec) Flue Gas Mass Rate (G31) 25% (g/sec)
CPM 58
200Pa 22.6 5.7 23.2 5.8
CPM 77
200Pa 29.8 7.5 30.6 7.7
CPM 96
200Pa 37.1 9.3 38.8 9.7
CPM 116
200Pa 45.1 11.3 46.2 11.6
CPM 144
200Pa 55.6 13.9 57 14.3
CPM 175
200Pa 67.3 16.8 69 17.3
The CPM boiler range does not have an internal Non Return Valve (NRV) as such any flue must be designed on zero or negative pressure unless a suitable NRV is fitted and if necessary interlocked to the appliance. Non Return Valves are included with the Lochinvar common flue header.
Itulau 16 o le 19
FA'O'OGA MA FA'AMATALAGA
Mea Nu.
Leai se mana'omia
Fa'amatalaga-O mea e fa'atonu
Fa'amatalaga
Fa'afeso'ota'i le 'au'aunaga a le 'au'aunaga a le Lochinvar e fa'atonu mea fa'aopoopo ile 01295 269981
Itulau 17 o le 19
Blank Page 18 of 19
Itulau 19 o le 19
Pepa / Punaoa
 |
Lochinvar CMP58 Does Include CPM-SP Range [pdf] Taiala mo Tagata Fa'aoga CMP58, CPM77, CPM96, CPM116, CPM146, CPM176, CMP58 Does Include CPM-SP Range, CMP58, Does Include CPM-SP Range, Include CPM-SP Range, CPM-SP Range |