micro bit MakeCode Keyboard Controls
Informasi produk
Spesifikasi:
- Sistem Operasi: Windows
- Cara Kontrol: Kontrol Keyboard
- Kompatibilitas: MakeCode Editor
Nggawe proyek anyar
Ing editor MakeCode, penet Tab kanggo nggayuh + Proyek Anyar, banjur pencet Ketik.
Type a name for your project, then press Enter. 
Nguripake kontrol keyboard pamblokiran
Pencet Tab, banjur pencet Enter. 
Mbukak utawa nutup kontrol keyboard bantuan
Hold Ctrl and press 
Tip: Yen sampeyan duwe spasi ing layar, bukak bantuan
Kontrol umum
Ruang kerja: Kontrol umum
Ing ruang kerja, gunakake kontrol umum yen perlu
| Tumindak | Trabasan |
| Cut | Ctrl + X |
| Nyalin | Ctrl + C |
| Tempel | Ctrl + V |
| batalaken | Ctrl + Z |
| Baleni maneh | Ctrl + Y |
| Open context menu (right-click menu) | Ctrl + Ketik |
| Duplikat | D |
| Next stack of blocks | N |
| Previous stack of blocks | B |
Navigasi menyang area: Pilihan 1
Make Code Keyboard Controls Navigate to an area: Option 1
Navigasi menyang area: Pilihan 2
Hold Ctrl + B, press Tab to move through the numbers, and then press Enter to confirm.
Workspace: Pilih workspace
Tekan tombol W.
Ruang kerja: Format blok (rapi).
Tekan tombol F. 
Access parts of a block
Ruang kerja: Akses bagean blok
Gunakake tombol panah kanggo ngakses macem-macem bagean blok.
Ruang kerja: Move a block
Pencet M, banjur gunakake tombol panah kanggo mindhah blok. Pencet Enter kanggo konfirmasi. 
Ruang kerja: Pindhah blok menyang endi wae
- Press M, then hold Ctrl and use the arrow keys.
- Pencet Enter kanggo konfirmasi.
Ruang kerja: Pedhot sambungan blok
Pencet X kanggo medhot pamblokiran 
Workspace: Delete a block
Press Delete or BackSpace to remove a block 
Ruang kerja: Owahi utawa konfirmasi
Press Enter or Space to confirm an action 
Ruang kerja: Blok pandhu arah
Gunakake tombol panah kanggo navigasi pamblokiran
Toolbox: Ngakses toolbox
Pencet T utawa tahan Ctrl + B banjur pencet 3 
Kothak piranti: Navigasi
Gunakake tombol panah kanggo navigasi kategori lan pamblokiran 
Kothak piranti: Pilih utawa konfirmasi pamblokiran
Pencet Enter utawa Space kanggo milih blok 
Toolbox: Search
- In the toolbox (T), start typing the name of a block.
- Press Enter to move to results.
- Press down arrows to select a block. Press Enter to confirm.
Specific blocks: Show LEDs block
- Use right arrow key then Enter to access LED editor.
- Use arrows to navigate LEDs.
- Press Enter to turn LED on and off.
- Press Esc to exit.
Specific blocks: Play melody
- Use right arrow to move to the melody. Press Enter to open melody.
- Press Tab to edit melody. Use arrows to select a note.
- Press Enter to confirm note.
- When finished, Tab to Done and press Enter.
Mikro:bit Educational Foundation mbit.io/makecode-keys This content is published under a Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) licence
Pitakonan sing Sering Ditakoni
Kepiye cara ngakses macem-macem bagean blok ing ruang kerja?
Use the arrow keys to navigate through different parts of a block.
Kepiye carane mbusak blok ing ruang kerja?
To delete a block, press Delete or BackSpace.
Dokumen / Sumber Daya
 |
micro bit MakeCode Keyboard Controls [pdf] Manual Pamilik Kontrol Keyboard MakeCode, Kontrol Keyboard, Kontrol |