I-micro bit MakeCode Keyboard Controls
Ulwazi Lomkhiqizo
Imininingwane:
- Isistimu yokusebenza: Windows
- Indlela Yokulawula: Izilawuli zekhibhodi
- Ukuhambisana: I-MakeCode Editor
Dala iphrojekthi entsha
Kumhleli we-MakeCode, cindezela u-Tab ukuze ufinyelele + Iphrojekthi Entsha, bese ucindezela u-Enter.
Type a name for your project, then press Enter. 
Vula izilawuli zekhibhodi
Cindezela u-Tab, bese ucindezela u-Enter. 
Vula noma vala usizo lwezilawuli zekhibhodi
Hold Ctrl and press 
Ithiphu: Uma unesikhala esikrinini sakho gcina usizo luvuliwe
Izilawuli ezijwayelekile
Indawo yokusebenza: Izilawuli ezijwayelekile
Endaweni yokusebenza, sebenzisa izilawuli ezijwayelekile njengoba kudingeka
| Isenzo | Isinqamuleli |
| Sika | Ctrl + X |
| Kopisha | Ctrl + C |
| Namathisela | Ctrl + V |
| Hlehlisa | Ctrl + Z |
| Yenza futhi | Ctrl + Y |
| Open context menu (right-click menu) | Ctrl + Ngena |
| Impinda | D |
| Next stack of blocks | N |
| Previous stack of blocks | B |
Zulazula uye endaweni: Inketho 1
Make Code Keyboard Controls Navigate to an area: Option 1
Zulazula uye endaweni: Inketho 2
Hold Ctrl + B, press Tab to move through the numbers, and then press Enter to confirm.
Indawo yokusebenza: Khetha indawo yokusebenza
Cindezela ukhiye W.
Indawo yokusebenza: Fometha (lungisa) amabhlogo
Cindezela ukhiye F. 
Access parts of a block
Indawo yokusebenza: Finyelela izingxenye zebhulokhi
Sebenzisa okhiye bemicibisholo ukuze ufinyelele izingxenye ezihlukene zebhulokhi.
Indawo yokusebenza: Move a block
Cindezela u-M, bese usebenzisa izinkinobho zemicibisholo ukuhambisa ibhulokhi. Cindezela u-Enter ukuze uqinisekise. 
Indawo yokusebenza: Hambisa ibhulokhi noma yikuphi
- Press M, then hold Ctrl and use the arrow keys.
- Cindezela u-Enter ukuze uqinisekise.
Indawo yokusebenza: Nqamula ibhulokhi
Cindezela u-X ukuze unqamule ibhulokhi 
Workspace: Delete a block
Press Delete or BackSpace to remove a block 
Indawo yokusebenza: Hlela noma uqinisekise
Press Enter or Space to confirm an action 
Indawo yokusebenza: Vimba ukuzulazula
Sebenzisa okhiye bemicibisholo ukuze uzulazule emabhuloki
Ibhokisi lamathuluzi: Finyelela ebhokisini lamathuluzi
Cindezela u-T noma ubambe u-Ctrl + B bese ucindezela u-3 
Ibhokisi lamathuluzi: Ukuzulazula
Sebenzisa okhiye bemicibisholo ukuze uzulazule ezigabeni namabhulokhi 
Ibhokisi lamathuluzi: Khetha noma uqinisekise ibhulokhi
Cindezela u-Enter noma u-Space ukuze ukhethe ibhulokhi 
Toolbox: Search
- In the toolbox (T), start typing the name of a block.
- Press Enter to move to results.
- Press down arrows to select a block. Press Enter to confirm.
Specific blocks: Show LEDs block
- Use right arrow key then Enter to access LED editor.
- Use arrows to navigate LEDs.
- Press Enter to turn LED on and off.
- Press Esc to exit.
Specific blocks: Play melody
- Use right arrow to move to the melody. Press Enter to open melody.
- Press Tab to edit melody. Use arrows to select a note.
- Press Enter to confirm note.
- When finished, Tab to Done and press Enter.
I-Micro:bit Educational Foundation mbit.io/makecode-keys This content is published under a Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) licence
imibuzo ejwayelekile ukubuzwa
Ngifinyelela kanjani ezingxenyeni ezihlukene zebhulokhi endaweni yokusebenza?
Use the arrow keys to navigate through different parts of a block.
Ngiyisusa kanjani ibhulokhi endaweni yokusebenza?
To delete a block, press Delete or BackSpace.
Amadokhumenti / Izinsiza
 |
I-micro bit MakeCode Keyboard Controls [pdf] Incwadi Yomnikazi Izilawuli zekhibhodi ye-MakeCode, Izilawuli zekhibhodi, Izilawuli |