micro bit MakeCode Keyboard Controls
제품 정보
명세서:
- 운영 체제: 윈도우
- Control Method: Keyboard Controls
- Compatibility: MakeCode Editor
새로운 프로젝트를 생성하세요
In the MakeCode editor, press Tab to reach + New Project, then press Enter.
Type a name for your project, then press Enter. 
Turn on blocks keyboard controls
Press Tab, then press Enter. 
Open or close keyboard controls help
Hold Ctrl and press 
Tip: If you have space on your screen then keep the help open
일반 제어
Workspace: General controls
In the workspace, use general controls as needed
| 행동 | 지름길 |
| 자르다 | Ctrl 키 + X |
| 복사 | Ctrl 키 + C |
| 반죽 | Ctrl 키 + V |
| 끄르다 | Ctrl 키 + Z |
| 다시 하다 | Ctrl 키 + Y |
| Open context menu (right-click menu) | Ctrl 키 + 입력하다 |
| 복제하다 | D |
| Next stack of blocks | N |
| Previous stack of blocks | B |
Navigate to an area: Option 1
Make Code Keyboard Controls Navigate to an area: Option 1
Navigate to an area: Option 2
Hold Ctrl + B, press Tab to move through the numbers, and then press Enter to confirm.
Workspace: Select the workspace
W 키를 누릅니다.
Workspace: Format (tidy up) blocks
Press the F key. 
Access parts of a block
Workspace: Access parts of a block
Use the arrow keys to access different parts of a block.
작업 공간: Move a block
Press M, then use the arrow keys to move a block. Press Enter to confirm. 
Workspace: Move a block anywhere
- Press M, then hold Ctrl and use the arrow keys.
- 확인하려면 Enter 키를 누르세요.
Workspace: Disconnect a block
Press X to disconnect a block 
Workspace: Delete a block
Press Delete or BackSpace to remove a block 
Workspace: Edit or confirm
Press Enter or Space to confirm an action 
Workspace: Block navigation
Use arrow keys to navigate blocks
Toolbox: Access the toolbox
Press T or hold Ctrl + B then press 3 
Toolbox: Navigation
Use arrow keys to navigate categories and blocks 
Toolbox: Select or confirm a block
Press Enter or Space to select a block 
Toolbox: Search
- In the toolbox (T), start typing the name of a block.
- Press Enter to move to results.
- Press down arrows to select a block. Press Enter to confirm.
Specific blocks: Show LEDs block
- Use right arrow key then Enter to access LED editor.
- Use arrows to navigate LEDs.
- Press Enter to turn LED on and off.
- Press Esc to exit.
Specific blocks: Play melody
- Use right arrow to move to the melody. Press Enter to open melody.
- Press Tab to edit melody. Use arrows to select a note.
- Press Enter to confirm note.
- When finished, Tab to Done and press Enter.
마이크로:bit Educational Foundation mbit.io/makecode-keys This content is published under a Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) licence
자주 묻는 질문
How do I access different parts of a block in the workspace?
Use the arrow keys to navigate through different parts of a block.
How do I delete a block in the workspace?
To delete a block, press Delete or BackSpace.
문서 / 리소스
 |
micro bit MakeCode Keyboard Controls [PDF 파일] 사용 설명서 MakeCode Keyboard Controls, Keyboard Controls, Controls |