Micro bit MakeCode Keyboard Controls
Tlhahisoleseding ya Sehlahiswa
Litlhaloso:
- Sistimi e sebetsang: Windows
- Mokhoa oa ho laola: Litaolo tsa Keyboard
- Tšebelisano: MakeCode Editor
Theha morero o mocha
Ho MakeCode editor, tobetsa Tab ho fihlella + New Project, ebe o tobetsa Enter.
Type a name for your project, then press Enter. 
Bulela li-blocks control tsa keyboard
Tobetsa Tab, ebe o tobetsa Enter. 
Thuso ea ho bula kapa ho koala keyboard
Hold Ctrl and press 
Keletso: Haeba u na le sebaka skrineng sa hau boloka thuso e bulehile
Litaolo tse akaretsang
Sebaka sa mosebetsi: Litaolo tse akaretsang
Sebakeng sa mosebetsi, sebelisa litsamaiso tse akaretsang ha ho hlokahala
| Ketso | Kgaoletso |
| Khaola | Ctrl + X |
| Kopitsa | Ctrl + C |
| Beha | Ctrl + V |
| Etsolla | Ctrl + Z |
| Etsa hape | Ctrl + Y |
| Open context menu (right-click menu) | Ctrl + Kena |
| Ea bobeli | D |
| Next stack of blocks | N |
| Previous stack of blocks | B |
Tsamaea sebakeng: Khetho ea 1
Make Code Keyboard Controls Navigate to an area: Option 1
Tsamaea sebakeng: Khetho ea 2
Hold Ctrl + B, press Tab to move through the numbers, and then press Enter to confirm.
Sebaka sa ho sebetsa: Khetha sebaka sa ho sebetsa
Tobetsa konopo ea W.
Sebaka sa ho sebetsa: Fomata (hlopha) liboloko
Tobetsa konopo ea F. 
Access parts of a block
Sebaka sa ho sebetsa: Ho fihlella likarolo tsa boloko
Sebelisa linotlolo tsa metsu ho fihlella likarolo tse fapaneng tsa boloko.
Sebaka sa mosebetsi: Move a block
Tobetsa M, ebe u sebelisa linotlolo tsa metsu ho tsamaisa boloko. Tobetsa Enter ho netefatsa. 
Sebaka sa ho sebetsa: Tsamaisa boloko kae kapa kae
- Press M, then hold Ctrl and use the arrow keys.
- Tobetsa Enter ho netefatsa.
Sebaka sa mosebetsi: Hakolla boloko
Tobetsa X ho hakolla boloko 
Workspace: Delete a block
Press Delete or BackSpace to remove a block 
Sebaka sa ho sebetsa: Fetola kapa netefatsa
Press Enter or Space to confirm an action 
Sebaka sa ho sebetsa: Thibela ho sesa
Sebelisa linotlolo tsa metsu ho fumana li-blocks
Lebokose la lisebelisoa: Fumana lebokose la lisebelisoa
Tobetsa T kapa u tšoare Ctrl + B ebe o tobetsa 3 
Lebokose la lisebelisoa: Ho tsamaea
Sebelisa linotlolo tsa metsu ho fumana likarolo le li-blocks 
Lebokose la lisebelisoa: Khetha kapa u netefatse boloko
Tobetsa Enter kapa Space ho khetha boloko 
Toolbox: Search
- In the toolbox (T), start typing the name of a block.
- Press Enter to move to results.
- Press down arrows to select a block. Press Enter to confirm.
Specific blocks: Show LEDs block
- Use right arrow key then Enter to access LED editor.
- Use arrows to navigate LEDs.
- Press Enter to turn LED on and off.
- Press Esc to exit.
Specific blocks: Play melody
- Use right arrow to move to the melody. Press Enter to open melody.
- Press Tab to edit melody. Use arrows to select a note.
- Press Enter to confirm note.
- When finished, Tab to Done and press Enter.
E nyane:bit Educational Foundation mbit.io/makecode-keys This content is published under a Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) licence
Lipotso Tse Botsoang Hangata
Ke fihlella joang likarolo tse fapaneng tsa boloko sebakeng sa mosebetsi?
Use the arrow keys to navigate through different parts of a block.
Nka hlakola boloko joang sebakeng sa mosebetsi?
To delete a block, press Delete or BackSpace.
Litokomane / Lisebelisoa
 |
Micro bit MakeCode Keyboard Controls [pdf] Buka ea Mong'a MakeCode Keyboard Controls, Keyboard Controls, Controls |