micro bit MakeCode Izilawuli Keyboard
Ulwazi lweMveliso
Iinkcukacha:
- Inkqubo yokusebenza: Windows
- Indlela yokulawula: Izilawuli zekhibhodi
- Ukuhambelana: Umhleli weMakeCode
Yenza iprojekthi entsha
Kumhleli weMakeCode, cofa iTab ukufikelela + iProjekthi eNtsha, emva koko ucinezele u-Enter.
Type a name for your project, then press Enter. 
Layita iibhloko zolawulo lwebhodi yezitshixo
Cofa iTab, uze ucofe u-Enter. 
Vula okanye uvale uncedo lolawulo lwebhodi yezitshixo
Hold Ctrl and press 
Ingcebiso: Ukuba unendawo kwiscreen sakho ke gcina uncedo luvuliwe
Ulawulo ngokubanzi
Indawo yokusebenzela: Ulawulo ngokubanzi
Kwindawo yokusebenza, sebenzisa ulawulo jikelele njengoko kufuneka
| Isenzo | Indlela emfutshane |
| Sika | Ctrl + X |
| Khuphela | Ctrl + C |
| Ncamathelisa | Ctrl + V |
| qhaqha | Ctrl + Z |
| Phinda wenze | Ctrl + Y |
| Open context menu (right-click menu) | Ctrl + Ngena |
| Phinda kabini | D |
| Next stack of blocks | N |
| Previous stack of blocks | B |
Yiya kwindawo: Ukhetho loku-1
Make Code Keyboard Controls Navigate to an area: Option 1
Yiya kwindawo: Ukhetho loku-2
Hold Ctrl + B, press Tab to move through the numbers, and then press Enter to confirm.
Indawo yokusebenza: Khetha indawo yokusebenza
Cofa iqhosha likaW.
Indawo yokusebenzela: Fomata (coca) iibhloko
Cofa iqhosha lika-F. 
Access parts of a block
Indawo yokusebenzela: Ukufikelela kwiindawo zebhloko
Sebenzisa amaqhosha otolo ukufikelela kwiindawo ezahlukeneyo zebhloko.
Indawo yokusebenzela: Move a block
Cofa uM, emva koko usebenzise amaqhosha otolo ukususa ibhloko. Cofa u-Enter ukuqinisekisa. 
Indawo yokusebenzela: Hambisa ibhloko naphi na
- Press M, then hold Ctrl and use the arrow keys.
- Cofa u-Enter ukuqinisekisa.
Indawo yokusebenzela: Nqamula ibhloko
Cofa u-X ukukhupha ibhloko 
Workspace: Delete a block
Press Delete or BackSpace to remove a block 
Indawo yokusebenza: Hlela okanye uqinisekise
Press Enter or Space to confirm an action 
Indawo yokusebenza: Vimba ukukhangela
Sebenzisa amaqhosha otolo ukukhangela iibhloko
Ibhokisi yezixhobo: Fikelela kwibhokisi yesixhobo
Cofa u-T okanye ubambe u-Ctrl + B uze ucofe u-3 
Ibhokisi yesixhobo: Ukukhangela
Sebenzisa izitshixo zotolo ukujonga iindidi kunye neebhloko 
Ibhokisi yesixhobo: Khetha okanye uqinisekise ibhloko
Cofa u-Enter okanye i-Space ukukhetha ibhloko 
Toolbox: Search
- In the toolbox (T), start typing the name of a block.
- Press Enter to move to results.
- Press down arrows to select a block. Press Enter to confirm.
Specific blocks: Show LEDs block
- Use right arrow key then Enter to access LED editor.
- Use arrows to navigate LEDs.
- Press Enter to turn LED on and off.
- Press Esc to exit.
Specific blocks: Play melody
- Use right arrow to move to the melody. Press Enter to open melody.
- Press Tab to edit melody. Use arrows to select a note.
- Press Enter to confirm note.
- When finished, Tab to Done and press Enter.
Micro:bit Educational Foundation mbit.io/makecode-keys This content is published under a Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) licence
Imibuzo ebuzwa qho
Ndingena njani kwiindawo ezahlukeneyo zebhloko kwindawo yokusebenza?
Use the arrow keys to navigate through different parts of a block.
Ndiyicima njani ibhloko kwindawo yokusebenza?
To delete a block, press Delete or BackSpace.
Amaxwebhu / Izibonelelo
 |
micro bit MakeCode Izilawuli Keyboard [pdf] Incwadi yoMnini Izilawuli zekhibhodi zeMakeCode, iziLawuli zekhibhodi, iziLawuli |